This commit adds to pg_stat_statements the two new fields for local
buffers introduced by 295c36c0c1, adding the time spent to read and
write these blocks. These are similar to what is done for temp and
shared blocks. This information available only if track_io_timing is
enabled.
Like for 5a3423ad8e, no version bump is required in the module.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
There was no I/O timing statistics for counting read and write timings
on local blocks, contrary to the counterparts for temp and shared
blocks. This information is available when track_io_timing is enabled.
The output of EXPLAIN is updated to show this information. An update of
pg_stat_statements is planned next.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
These two counters, defined in BufferUsage to track respectively the
time spent while reading and writing blocks have historically only
tracked data related to shared buffers, when track_io_timing is enabled.
An upcoming patch to add specific counters for local buffers will take
advantage of this rename as it has come up that no data is currently
tracked for local buffers, and tracking local and shared buffers using
the same fields would be inconsistent with the treatment done for temp
buffers. Renaming the existing fields clarifies what the block type of
each stats field is.
pg_stat_statement is updated to reflect the rename. No extension
version bump is required as 5a3423ad8e has done one, affecting v17~.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
When processing a match tag, check to see if the claimed "off"
is more than the distance back to the output buffer start.
If it is, then the data is corrupt, and what's more we would
fetch from outside the buffer boundaries and potentially incur
a SIGSEGV. (Although the odds of that seem relatively low, given
that "off" can't be more than 4K.)
Back-patch to v13; before that, this function wasn't really
trying to protect against bad data.
Report and fix by Flavien Guedez.
Discussion: https://postgr.es/m/01fc0593-e31e-463d-902c-dd43174acee2@oopacity.net
An extra rule is needed in src/include/Makefile for VPATH builds to
install any generated server-side include files, and wait_event_types.h
was forgotten from the set.
Issue introduced by fa88928470.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/ZTAA11u7CtX6NqlK@msg.df7cb.de
Remove use of LLVMGetElementType() and provide the type of all pointers
to LLVMBuildXXX() functions when emitting IR, as required by modern LLVM
versions[1].
* For LLVM <= 14, we'll still use the old LLVMBuildXXX() functions.
* For LLVM == 15, we'll continue to do the same, explicitly opting
out of opaque pointer mode.
* For LLVM >= 16, we'll use the new LLVMBuildXXX2() functions that take
the extra type argument.
The difference is hidden behind some new IR emitting wrapper functions
l_load(), l_gep(), l_call() etc. The change is mostly mechanical,
except that at each site the correct type had to be provided.
In some places we needed to do some extra work to get functions types,
including some new wrappers for C++ APIs that are not yet exposed by in
LLVM's C API, and some new "example" functions in llvmjit_types.c
because it's no longer possible to start from the function pointer type
and ask for the function type.
Back-patch to 12, because it's a little tricker in 11 and we agreed not
to put the latest LLVM support into the upcoming final release of 11.
[1] https://llvm.org/docs/OpaquePointers.html
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGKNX_%3Df%2B1C4r06WETKTq0G4Z_7q4L4Fxn5WWpMycDj9Fw%40mail.gmail.com
1) Remove useless entries from "unlike" lists. Runs that are not
listed in "like" don't need to be excluded in "unlike".
2) Ensure there is always a "like" list, even if it is empty. This
makes the test more self-documenting.
3) Use predefined lists such as %full_runs where appropriate, instead
of listing all runs separately.
Also add code that checks 1 and 2 automatically and dies with an error
for violations.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/1f8cb371-e84e-434e-0367-6b716fb16fa1@eisentraut.org
Relation files extended by multiple blocks at a time have been counting
the number of blocks written, but forgot to increment the write time in
this case, as single-block write and relation extension are treated as
two different I/O operations in the shared stats: IOOP_EXTEND vs
IOOP_WRITE. In this case IOOP_EXTEND was forgotten for normal
(non-temporary) relations, still the number of blocks written was
incremented according to the relation extend done.
Write times are tracked when track_io_timing is enabled, which is not
the case by default.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
Backpatch-through: 16
Since its introduction, LogLogicalMessage() (via the SQL interface
pg_logical_emit_message()) has never included a call to XLogFlush(),
causing it to potentially lose messages on a crash when used in
non-transactional mode. This has come up to me as a problem while
playing with ideas to design a test suite for what has become
039_end_of_wal.pl introduced in bae868caf2 by Thomas Munro, because
there are no direct ways to force a WAL flush via SQL.
The default is false, to not flush messages and influence existing
use-cases where this function could be used. If set to true, the
message emitted is flushed before returning back to the caller, making
the message durable on crash. This new option has no effect when using
pg_logical_emit_message() in transactional mode, as the record's flush
is guaranteed by the WAL record generated by the transaction committed.
Two queries of test_decoding are tweaked to cover the new code path for
the flush.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Andres Freund, Amit Kapila, Fujii Masao, Tung Nguyen, Tomas
Vondra
Discussion: https://postgr.es/m/ZNsdThSe2qgsfs7R@paquier.xyz
Use a modulo operator instead of implementing the same behavior
with a loop. The loop solution is doubtless microscopically
faster for the typical case of only wrapping into the very next
day, but maybe not so much for large interval values. In any
case, timetz is such a backwater that it's doubtful anybody
would notice any performance change anyway.
This avoids a compiler bug occurring in AIX's xlc, even in pretty
late-model revisions.
We did not have test coverage for the case where the initial
result->time value is negative, so add that.
For the moment, install this only in HEAD. My plan is to
back-patch the test case, and then the code change assuming that
buildfarm testing proves the bug occurs in the back branches.
(That seems pretty likely, but let's find out for sure.)
Per buildfarm results from commits 97957fdba and 2f0472030.
Thanks to Michael Paquier for the idea to use a modulo operation
to replace the faulty loop.
Discussion: https://postgr.es/m/CA+hUKGK=DOC+hE-62FKfZy=Ybt5uLkrg3zCZD-jFykM-iPn8yw@mail.gmail.com
The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
First, we shouldn't recommend switching to single-user mode, because
that's terrible advice. Especially on newer versions where VACUUM
will enter emergency mode when nearing (M)XID exhaustion, it's
perfectly fine to just VACUUM in multi-user mode. Doing it that way
is less disruptive and avoids disabling the safeguards that prevent
actual wraparound, so recommend that instead.
Second, be more precise about what is going to happen (when we're
nearing the limits) or what is happening (when we actually hit them).
The database doesn't shut down, nor does it refuse all commands. It
refuses commands that assign whichever of XIDs and MXIDs are nearly
exhausted.
No back-patch. The existing hint that advises going to single-user
mode is sufficiently awful advice that removing it or changing it
might be justifiable even though we normally avoid changing
user-facing messages in back-branches, but I (rhaas) felt that it
was better to be more conservative and limit this fix to master
only. Aside from the usual risk of breaking translations, people
might be used to the existing message, or even have monitoring
scripts that look for it.
Alexander Alekseev, John Naylor, Robert Haas, reviewed at various
times by Peter Geoghegan, Hannu Krosing, and Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZBg95FiR9wVQPAXpGPRkacSt2okVge+PKPPFppN7sfnQ@mail.gmail.com
The word "assign" is used in various places internally to describe what
GetNewMultiXactId does, but the user-facing messages have previously
said "generate". For consistency, standardize on "assign," which seems
(at least to me) to be slightly clearer.
Discussion: http://postgr.es/m/CA+TgmoaoE1_i3=4-7GCTtKLVZVQ2Gh6qESW2VG1OprtycxOHMA@mail.gmail.com
It is possible that the tail XID of pg_serial/ gets ahead of its head
XID, which would cause the truncation of pg_serial/ done during
checkpoints to show up as a "wraparound" LOG in SimpleLruTruncate(),
which is confusing. This also wastes a bit of disk space until the head
page is reclaimed again.
CheckPointPredicate() is changed so as the cutoff page for the
truncation is switched to the head page if the tail XID has advanced
beyond the head XID, rather than the tail page. This prevents the
confusing LOG message about a wraparound while allowing some truncation
to be done to cut in disk space.
This could be considered as a bug fix, but the original behavior is
harmless as well, resulting only in disk space temporarily wasted, so
no backpatch is done.
Author: Sami Imseih
Reviewed-by: Heikki Linnakangas, Michael Paquier
Discussion: https://postgr.es/m/755E19CA-D02C-4A4C-80D3-74F775410C48@amazon.com
Restart the apply worker if the subscription owner's superuser privileges
have been revoked. This is required so that the subscription connection
string gets revalidated and use the password option to connect to the
publisher for non-superusers, if required.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CALDaNm2Dxmhq08nr4P6G+24QvdBo_GAVyZ_Q1TcGYK+8NHs9xw@mail.gmail.com
Extend the test added by commit 97957fdba so that it also covers
timetz_izone(), that is the "AT TIME ZONE interval" case.
This is mostly to see if xlc's apparent bug occurs there too,
but more code coverage is always welcome.
Discussion: https://postgr.es/m/2287835.1697464481@sss.pgh.pa.us
Dropping a temp table could entail TOAST table access to clean out
toasted catalog entries, such as large pg_constraint.conbin strings
for complex CHECK constraints. If we did that via ON COMMIT DROP,
we triggered the assertion in init_toast_snapshot(), because
there was no provision for setting up a snapshot for the drop
actions. Fix that.
(I assume here that the adjacent truncation actions for ON COMMIT
DELETE ROWS don't have a similar problem: it doesn't seem like
nontransactional truncations would need to touch any toasted fields.
If that proves wrong, we could refactor a bit to have the same
snapshot acquisition cover that too.)
The test case added here does not fail before v15, because that
assertion was added in 277692220 which was not back-patched.
However, the race condition the assertion warns of surely
exists further back, so back-patch to all supported branches.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-x26=_QxxgdJyNbiCDzvtr2WV5ZDso_v-CukKEe6cBZw@mail.gmail.com
If SIGTERM is received within this section, the startup process
will immediately proc_exit() in the signal handler, so it is
inadvisable to include any more code than is required there (as
such code is unlikely to be compatible with doing proc_exit() in a
signal handler). This commit moves the code recently added to this
section (see 1b06d7bac9 and 7fed801135) to outside of the section.
This ensures that the startup process only calls proc_exit() in its
SIGTERM handler for the duration of the system() call, which is how
this code worked from v8.4 to v14.
Reported-by: Michael Paquier, Thomas Munro
Analyzed-by: Andres Freund
Suggested-by: Tom Lane
Reviewed-by: Michael Paquier, Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 15
The old documentation encourages entering single-user mode for no
reason, which is a bad plan in most cases. Instead, discourage users
from doing that, and explain the limited cases in which it may be
desirable.
The old documentation claims that running VACUUM as anyone but the
superuser can't possibly work, which is not really true, because it
might be that some other user has enough permissions to VACUUM all
the tables that matter. Weaken the language just a bit.
The old documentation claims that you can't run any commands
when near XID exhaustion, which is false because you can still
run commands that don't require an XID, like a SELECT without a
locking clause.
The old documentation doesn't clearly explain that it's a good idea
to get rid of prepared transactons, long-running transactions, and
replication slots that are preventing (M)XID horizon advancement.
Spell out the steps to do that.
Also, discourage the use of VACUUM FULL and VACUUM FREEZE in
this type of scenario.
Back-patch to v14. Much of this is good advice on all supported
versions, but before 60f1f09ff4
the chances of VACUUM failing in multi-user mode were much higher.
Alexander Alekseev, John Naylor, Robert Haas, reviewed at various
times by Peter Geoghegan, Hannu Krosing, and Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoYtsUDrzaHcmjFhLzTk1VEv29mO_u-MT+XWHrBJ_4nD8A@mail.gmail.com
This is a consequence of 4817da51f6 that has bumped up
max_worker_processes, where now the last worker started by the test
would be able to start by itself a parallel worker because there are
more slots available. This did not show up before as the number of
bgworkers reached exactly 8, as known as the previous limit, at the end
of the test.
Per report from buildfarm member crake, reproducible with
debug_parallel_query = regress in the same fashion as fd4d93d269.
Some of our src/bin tools read the control file without any kind of
interlocking against concurrent writes from the server. At least ext4
and ntfs can expose partially modified contents when you do that.
For now, we'll try to tolerate this by retrying up to 10 times if the
checksum doesn't match, until we get two reads in a row with the same
bad checksum. This is not guaranteed to reach the right conclusion, but
it seems very likely to. Thanks to Tom Lane for this suggestion.
Various ideas for interlocking or atomicity were considered too
complicated, unportable or expensive given the lack of field reports,
but remain open for future reconsideration.
Back-patch as far as 12. It doesn't seem like a good idea to put a
heuristic change for a very rare problem into the final release of 11.
Reviewed-by: Anton A. Melnikov <aamelnikov@inbox.ru>
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20221123014224.xisi44byq3cf5psi%40awork3.anarazel.de
mamba has detected a failure in the last test that should start a
bgworker while bypassing the role login check. The buildfarm did not
provide any information about its failure in the logs, but I suspect
that this is caused by an exhaustion of the max_worker_processes slots
set at 8 by default.
In "normal" test runs, the number of bgworkers running at this stage of
the test is already 7, so, if one of them spawns for example a parallel
worker all the slots would be taken, preventing the last worker of the
test to start.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZSyebsiub88pyJJO@paquier.xyz
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
Commit dc7d70ea added functions that read the control file, but didn't
acquire ControlFileLock. With unlucky timing, file systems that have
weak interlocking like ext4 and ntfs could expose partially overwritten
contents, and the checksum would fail.
Back-patch to all supported releases.
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Anton A. Melnikov <aamelnikov@inbox.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20221123014224.xisi44byq3cf5psi%40awork3.anarazel.de
Under interval_ops, some equal values are distinguishable. One such
pair is '24:00:00' and '1 day'. With that being so, btequalimage()
breaches the documented contract for the "equalimage" btree support
function. This can cause incorrect results from index-only scans.
Users should REINDEX any btree indexes having interval-type columns.
After updating, pg_amcheck will report an error for almost all such
indexes. This fix makes interval_ops simply omit the support function,
like numeric_ops does. Back-pack to v13, where btequalimage() first
appeared. In back branches, for the benefit of old catalog content,
btequalimage() code will return false for type "interval". Going
forward, back-branch initdb will include the catalog change.
Reviewed by Peter Geoghegan.
Discussion: https://postgr.es/m/20231011013317.22.nmisch@google.com
Starting on 2023-08-03, this intermittently terminated a "pgbench -C"
test in CI. It could affect a high-client-count "pgbench" without "-C".
While parallel reindexdb and vacuumdb reach the same problematic check,
sufficient client count and/or connection turnover is less plausible for
them. Given the lack of examples from the buildfarm or from manual
builds, reproducing this must entail rare operating system
configurations. Also correct the associated error message, which was
wrong for non-Windows. Back-patch to v12, where the pgbench check first
appeared. While v11 vacuumdb has the problematic check, reaching it
with typical vacuumdb usage is implausible.
Reviewed by Thomas Munro.
Discussion: https://postgr.es/m/CA+hUKG+JwvTNdcyJTriy9BbtzF1veSRQ=9M_ZKFn9_LqE7Kp7Q@mail.gmail.com
For the same reasons given in commit 403ac226d, adjust these
functions to not assume that checking SearchSysCacheExists can
guarantee success of a later fetch.
This follows the same internal API choices made in the earlier commit:
add a function XXXExt(oid, is_missing) and use that to eliminate
the need for a separate existence check. The changes are very
straightforward, though tedious. For the moment I just made the new
functions static in namespace.c, but we could export them if a need
emerges.
Per bug #18014 from Alexander Lakhin. Given the lack of hard evidence
that there's a bug in non-debug builds, I'm content to fix this only
in HEAD.
Discussion: https://postgr.es/m/18014-28c81cb79d44295d@postgresql.org
The versions of these functions that accept object OIDs are supposed
to return NULL, rather than failing, if the target object has been
dropped. This makes it safe(r) to use them in queries that scan
catalogs, since the functions will be applied to objects that are
visible in the query's snapshot but might now be gone according to
the catalog snapshot. In most cases we implemented this by doing
a SearchSysCacheExists test and assuming that if that succeeds, we
can safely invoke the appropriate aclchk.c function, which will
immediately re-fetch the same syscache entry. It was argued that
if the existence test succeeds then the followup fetch must succeed
as well, for lack of any intervening AcceptInvalidationMessages call.
Alexander Lakhin demonstrated that this is not so when
CATCACHE_FORCE_RELEASE is enabled: the syscache entry will be forcibly
dropped at the end of SearchSysCacheExists, and then it is possible
for the catalog snapshot to get advanced while re-fetching the entry.
Alexander's test case requires the operation to happen inside a
parallel worker, but that seems incidental to the fundamental problem.
What remains obscure is whether there is a way for this to happen in a
non-debug build. Nonetheless, CATCACHE_FORCE_RELEASE is a very useful
test methodology, so we'd better make the code safe for it.
After some discussion we concluded that the most future-proof fix
is to give up the assumption that checking SearchSysCacheExists can
guarantee success of a later fetch. At best that assumption leads
to fragile code --- for example, has_type_privilege appears broken
for array types even if you believe the assumption holds. And it's
not even particularly efficient.
There had already been some work towards extending the aclchk.c
APIs to include "is_missing" output flags, so this patch extends
that work to cover all the aclchk.c functions that are used by the
has_xxx_privilege() functions. (This allows getting rid of some
ad-hoc decisions about not throwing errors in certain places in
aclchk.c.)
In passing, this fixes the has_sequence_privilege() functions to
provide the same guarantees as their cousins: for some reason the
SearchSysCacheExists tests never got added to those.
There is more work to do to remove the unsafe coding pattern with
SearchSysCacheExists in other places, but this is a pretty
self-contained patch so I'll commit it separately.
Per bug #18014 from Alexander Lakhin. Given the lack of hard evidence
that there's a bug in non-debug builds, I'm content to fix this only
in HEAD. (Perhaps we should clean up the has_sequence_privilege()
oversight in the back branches, but in the absence of field complaints
I'm not too excited about that either.)
Discussion: https://postgr.es/m/18014-28c81cb79d44295d@postgresql.org
When COPYing into a partitioned table that does now permit the use of
table_multi_insert(), we could error out with
ERROR: could not read block NN in file "base/...": read only 0 of 8192 bytes
because BulkInsertState->next_free was not reset between partitions. This
problem occurred only when not able to use table_multi_insert(), as a
dedicated BulkInsertState for each partition is used in that case.
The bug was introduced in 00d1e02be2, but it was hard to hit at that point,
as commonly bulk relation extension is not used when not using
table_multi_insert(). It became more likely after 82a4edabd2, which expanded
the use of bulk extension.
To fix the bug, reset the bulk relation extension state in BulkInsertState in
ReleaseBulkInsertStatePin(). That was added (in b1ecb9b3fc) to tackle a very
similar issue. Obviously the name is not quite correct, but there might be
external callers, and bulk insert state needs to be reset in precisely in the
situations that ReleaseBulkInsertStatePin() already needed to be called.
Medium term the better fix likely is to disallow reusing BulkInsertState
across relations.
Add a test that, without the fix, reproduces #18130 in most
configurations. The test also catches the problem fixed in b1ecb9b3fc when
run with small shared_buffers.
Reported-by: Ivan Kolombet <enderstd@gmail.com>
Analyzed-by: Tom Lane <tgl@sss.pgh.pa.us>
Analyzed-by: Andres Freund <andres@anarazel.de>
Bug: #18130
Discussion: https://postgr.es/m/18130-7a86a7356a75209d%40postgresql.org
Discussion: https://postgr.es/m/257696.1695670946%40sss.pgh.pa.us
Backpatch: 16-
* sync_method is renamed to wal_sync_method.
* sync_method_options[] is renamed to wal_sync_method_options[].
* assign_xlog_sync_method() is renamed to assign_wal_sync_method().
* The names of the available synchronization methods are now
prefixed with "WAL_SYNC_METHOD_" and have been moved into a
WalSyncMethod enum.
* PLATFORM_DEFAULT_SYNC_METHOD is renamed to
PLATFORM_DEFAULT_WAL_SYNC_METHOD, and DEFAULT_SYNC_METHOD is
renamed to DEFAULT_WAL_SYNC_METHOD.
These more descriptive names help distinguish the code for
wal_sync_method from the code for DataDirSyncMethod (e.g., the
recovery_init_sync_method configuration parameter and the
--sync-method option provided by several frontend utilities). This
change also prevents name collisions between the aforementioned
sets of code. Since this only improves the naming of internal
identifiers, there should be no behavior change.
Author: Maxim Orlov
Discussion: https://postgr.es/m/CACG%3DezbL1gwE7_K7sr9uqaCGkWhmvRTcTEnm3%2BX1xsRNwbXULQ%40mail.gmail.com
AT TIME ZONE is completed with a list of supported timezones, something
not needed by AT LOCAL.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Jim Jones
Discussion: https://postgr.es/m/87jzyzsvgv.fsf@wibble.ilmari.org
When converting a timestamp to/from with/without time zone, the SQL
Standard specifies an AT LOCAL variant of AT TIME ZONE which uses the
session's time zone. This includes three system functions able to do
the work in the same way as the existing flavors for AT TIME ZONE,
except that these need to be marked as stable as they depend on the
session's TimeZone GUC.
Bump catalog version.
Author: Vik Fearing
Reviewed-by: Laurenz Albe, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
When MyProc->delayChkptFlags is set to temporarily block phase
transitions in a concurrent checkpoint, the checkpointer enters a
sleep-poll loop to wait for the flag to be cleared. We should show that
as a wait event in the pg_stat_activity view.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGL7Whi8iwKbzkbn_1fixH3Yy8aAPz7mfq6Hpj7FeJrKMg%40mail.gmail.com
timezone(zone, timestamp) is already mentioned as an equivalent of the
two first patterns in the table describing the AT TIME ZONE variants,
but did not mention the third case about "time" and its equivalent as an
SQL function, so let's be consistent here.
Extracted from a larger patch by the same author.
Author: Vik Fearing
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
An upcoming patch wants to introduce an additional special case in
this function. To keep that as cheap as possible, minimize the amount
of branching that we do based on whether this is an XLOG_SWITCH
record.
Additionally, and also in the interest of keeping the overhead of
special-case code paths as low as possible, apply likely() to the
non-XLOG_SWITCH case, since only a very tiny fraction of WAL records
will be XLOG_SWITCH records.
Patch by me, reviewed by Dilip Kumar, Amit Kapila, Andres Freund,
and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYy-Vc6G9QKcAKNksCa29cv__czr+N9X_QCxEfQVpp_8w@mail.gmail.com
This could only affect HASH partitioned tables with at least 2 partition
key columns.
If partition pruning was delayed until execution and the query contained
an IS NULL qual on one of the partitioned keys, and some subsequent
partitioned key was being compared to a non-Const, then this could result
in a crash due to the incorrect keyno being used to calculate the
stateidx for the expression evaluation code.
Here we fix this by properly skipping partitioned keys which have a
nullkey set. Effectively, this must be the same as what's going on
inside perform_pruning_base_step().
Sergei Glukhov also provided a patch, but that's not what's being used
here.
Reported-by: Sergei Glukhov
Reviewed-by: tender wang, Sergei Glukhov
Discussion: https://postgr.es/m/d05b26fa-af54-27e1-f693-6c31590802fa@postgrespro.ru
Backpatch-through: 11, where runtime partition pruning was added.