of order; the 'server log' output is actually client output in these
scenarios and we ought to treat elevels the same way as in the client
case. This allows initdb to not send backend stderr to /dev/null anymore,
which makes it much more likely that people will notice problems during
initdb.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
advertised in RowDescription message. Depending on the physical tuple's
column count is not really correct, since according to heap_getattr()
conventions the tuple may be short some columns, which will automatically
get read as nulls. Problem has been latent since forever, but was only
exposed by recent change to skip a projection step in SELECT * FROM...
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
single-byte encodings, and a direct C implementation of the single-argument
forms (where spaces are always what gets trimmed). This is in preparation
for using rtrim1() as the bpchar-to-text cast operator, but is a useful
performance improvement even if we decide not to do that.
example from Rao Kumar. This is a very corner corner-case, requiring
a minimum of three closely-spaced database crashes and an unlucky
positioning of the second recovery's checkpoint record before you'd notice
any problem. But the consequences are dire enough that it's a must-fix.
Ross Reedstrom, a couple months back) and to detect timezones that are
using leap-second timekeeping. The unknown-zone-name test is pretty
heuristic and ugly, but it seems better than the old behavior of just
switching to GMT given a bad name. Also make DecodePosixTimezone() a
tad more robust.
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
the type OID and typmod of the underlying base type. Per discussions
a few weeks ago with Andreas Pflug and others. Note that this behavioral
change affects both old- and new-protocol clients.
This makes no difference for existing uses, but allows SelectSortFunction()
and pred_test_simple_clause() to use indexscans instead of seqscans to
locate entries for a particular operator in pg_amop. Better yet, they can
use the SearchSysCacheList() API to cache the search results.
dropped. The simplest fix for INSERT/UPDATE cases turns out to be for
preptlist.c to insert NULLs of a known-good type (I used INT4) rather
than making them match the deleted column's type. Since the representation
of NULL is actually datatype-independent, this should work fine.
I also re-reverted the patch to disable the use_physical_tlist optimization
in the presence of dropped columns. It still doesn't look worth the
trouble to be smarter, if there are no other bugs to fix.
Added a regression test to catch future problems in this area.
where the table contains dropped columns. If the columns are dropped,
then their types may be gone as well, which causes ExecTypeFromTL() to
fail if the dropped columns appear in a plan node's tlist. This could
be worked around but I don't think the optimization is valuable enough
to be worth the trouble.
detected during buffer dump to be labeled with the buffer location.
For example, if a page LSN is clobbered, we now produce something like
ERROR: XLogFlush: request 2C000000/8468EC8 is not satisfied --- flushed only
to 0/8468EF0
CONTEXT: writing block 0 of relation 428946/566240
whereas before there was no convenient way to find out which page had
been trashed.
dead xlog segments are not considered part of a critical section. It is
not necessary to force a database-wide panic if we get a failure in these
operations. Per recent trouble reports.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
Describe would claim that no tuples will be returned. Only affects
SELECTs added to non-SELECT base queries by rewrite rules. If you
want to see the output of such a select, you gotta use 'simple Query'
protocol.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
which does the same thing. Perhaps at one time there was a reason to
allow plan nodes to store their result types in different places, but
AFAICT that's been unnecessary for a good while.
Per recent discussion on pgsql-general, this is appropriate for spec
compliance, and has the nice side-effect of easing porting from old
pg_dump files that exhibit the 59.999=>60.000 roundoff problem.
implementation limits, do not issue an ERROR; instead issue a NOTICE and use
the max supported value. Per pgsql-general discussion of 28-Apr, this is
needed to allow easy porting from pre-7.3 releases where the limits were
higher.
Unrelated change in same area: accept GLOBAL TEMP/TEMPORARY as a synonym
for TEMPORARY, as per pgsql-hackers discussion of 15-Apr. We previously
rejected it, but that was based on a misreading of the spec --- SQL92's
GLOBAL temp tables are really closer to what we have than their LOCAL ones.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
Without this fix, CVS tip dumps core when running the regression tests
with geqo_threshold = 2. I would think that a similar patch might be
needed in 7.3, but cannot duplicate the failure in that branch --- so
for now, leave well enough alone.
of extended query features in new FE/BE protocol. TransactionCommandContext
is gone (PortalContext replaces it for some purposes), and QueryContext
has taken on a new meaning (MessageContext plays its old role).
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
I had inadvertently omitted it while rearranging things to support
length-counted incoming messages. Also, change the parser's API back
to accepting a 'char *' query string instead of 'StringInfo', as the
latter wasn't buying us anything except overhead. (I think when I put
it in I had some notion of making the parser API 8-bit-clean, but
seeing that flex depends on null-terminated input, that's not really
ever gonna happen.)
in all cases, leaked TopMemoryContext memory in others. Make the
interaction between SetClientEncoding and InitializeClientEncoding
cleaner and better documented. I suspect these changes should be
back-patched into 7.3, but will wait on Tatsuo's verification.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
into a UNION that has some type coercions applied to the component
queries, so long as the qual itself does not reference any columns that
have such coercions. Per example from Jonathan Bartlett 24-Apr-03.
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
Output \r\n termination on Win32.
Disallow literal carriage return as a data value,
backslash-carriage-return and \r still allowed.
Doc changes already committed.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
account for NULLs; in hindsight this is obvious since the code for
the MCV-lists case would reduce to this when there are zero entries
in both lists. Per example from Alec Mitchell.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
on UPDATE.
This get's rid of the long standing annoyance that updating a row
that has foreign keys locks all the referenced rows even if the
foreign key values do not change.
The trick is to actually do a check identical to NO ACTION after an
eventually done UPDATE in the SET DEFAULT case. Since a SET DEFAULT
operation should have moved referencing rows to a new "home", a following
NO ACTION check can only fail if the column defaults of the referencing
table resulted in the key we actually deleted. Thanks to Stephan.
Jan
find out about it is to read the documentation that tells you how
dangerous it is. Add default_transaction_read_only to documentation;
seems to have been overlooked in patch that added read-only transactions.
Clean up check_guc comparison script, which has been suffering bit rot.
an unneeded memory context and some variables that are not used anymore.
It's pretty trivial and the regression tests pass fine. There's no
change in functionality, only deletion of unused code. I left an empty
function because maybe I'll need it for nested transactions.
Alvaro Herrera
harmless on signed-char machines but would lead to core dump in the
deadlock detection code if char is unsigned. Amazingly, this bug has
been here since 7.1 and yet wasn't reported till now. Thanks to Robert
Bruccoleri for providing the opportunity to track it down.
typing error in src/backend/libpq/be-secure.c ???
Long Description
In src/backend/libpq/be-secure.c: secure_write
on SSL_ERROR_WANT_WRITE call secure_read instead
secure_write again. May be is this a typing error?
Sergey N. Yatskevich (syatskevich@n21lab.gosniias.msk.ru)
page when it's read in, per pghackers discussion around 17-Feb. Add a
GUC variable zero_damaged_pages that causes the response to be a WARNING
followed by zeroing the page, rather than the normal ERROR; this is per
Hiroshi's suggestion that there needs to be a way to get at the data
in the rest of the table.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
NULL key pointer, indicating that the existing scan key should be reused.
This behavior isn't used yet but will be needed for my planned fix to
the keys_are_unique code.
them as arrays of the internal datatype. This requires treating the
stavalues columns as 'anyarray' rather than 'text[]', which is not 100%
kosher but seems to work fine for the purposes we need for pg_statistic.
Perhaps in the future 'anyarray' will be allowed more generally.
refers to a non-DISTINCT output column of a DISTINCT ON subquery, or
if it refers to a function-returning-set, we cannot push it down.
But the old implementation refused to push down *any* quals if the
subquery had any such 'dangerous' outputs. Now we just look at the
output columns actually referenced by each qual expression. More code
than before, but probably no slower since we don't make unnecessary checks.
some of the algorithms for higher functions. I see about a factor of ten
speedup on the 'numeric' regression test, but it's unlikely that that test
is representative of real-world applications.
initdb forced due to change of on-disk representation for NUMERIC.
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
what is capable using integer-datatime timestamps. It does attempt
to exercise the maximum allowable timestamp range.
Also is a small error check when converting a timestamp from external
to internal format that prevents out of range timestamps from being
entered.
Files patched:
Index: src/backend/utils/adt/timestamp.c
Added range check to prevent out of range timestamps
from being used.
Index: src/test/regress/sql/horology.sql
Index: src/test/regress/expected/horology-no-DST-before-1970.out
Index: src/test/regress/expected/horology-solaris-1947.out
Limited range of timestamps being checked to
Jan 1, 4713 BC to Dec 31, 294276
In creating this patch, I have seen some definite problems with integer
timestamps and how they react when used near their limits. For example,
the following statement gives the correct result:
SELECT timestamp without time zone 'Jan 1, 4713 BC'
+ interval '109203489 days' AS "Dec 31, 294276";
However, this statement which is the logical inverse of the above
gives incorrect results:
SELECT timestamp without time zone '12/31/294276'
- timestamp without time zone 'Jan 1, 4713 BC' AS "109203489 Days";
John Cochran
patch fix it -- but this patch doesn't contains tests or docs fixes. I
will send it later.
Fixed outputs:
select to_char(x, '9999.999') as x,
to_char(x, 'S9999.999') as s,
to_char(x, 'SG9999.999') as sg,
to_char(x, 'MI9999.999') as mi,
to_char(x, 'PL9999.999') as pl,
to_char(x, 'PLMI9999.999') as plmi,
to_char(x, '9999.999SG') as sg2,
to_char(x, '9999.999PL') as pl2,
to_char(x, '9999.999MI') as mi2 from num;
Karel Zak
> >
> > - Add check in pg_dump to see if the value returned is the max /min
> > values and replace with NO MAXVALUE, NO MINVALUE.
> >
> > - Change START and INCREMENT to use START WITH and INCREMENT BY syntax.
> > This makes it a touch easier to port to other databases with sequences
> > (Oracle). PostgreSQL supports both syntaxes already.
>
> + char bufm[100],
> + bufx[100];
>
> This seems to be an arbitary size. Why not set it to the actual maximum
> length?
>
> Also:
>
> + snprintf(bufm, 100, INT64_FORMAT, SEQ_MINVALUE);
> + snprintf(bufx, 100, INT64_FORMAT, SEQ_MAXVALUE);
>
> sizeof(bufm), sizeof(bufx) is probably the more
> maintenance-friendly/standard way to do it.
I changed the code to use sizeof - but will wait for a response from
Peter before changing the size. It's consistent throughout the sequence
code to be 100 for this purpose.
Rod Taylor <rbt@rbt.ca>
> weird behavior across fork boundaries; (b) the additional memory space
> that has to be duplicated into child processes will cost something per
> child launch, even if the child never uses it. But these are only
> arguments that it might not *always* be a prudent thing to do, not that
> we shouldn't give the DBA the tool to do it if he wants. So fire away.
Here is a patch for the above, including a documentation update. It
creates a new GUC variable "preload_libraries", that accepts a list in
the form:
preload_libraries = '$libdir/mylib1:initfunc,$libdir/mylib2'
If ":initfunc" is omitted or not found, no initialization function is
executed, but the library is still preloaded. If "$libdir/mylib" isn't
found, the postmaster refuses to start.
In my testing with PL/R, it reduces the first call to a PL/R function
(after connecting) from almost 2 seconds, down to about 8 ms.
Joe Conway
This bug has been latent since 7.0 or maybe even further back, but it
was only exposed when parse_clause.c stopped suppressing duplicate
items (see its rev 1.96 of 18-Aug-02).
division and modulo functions, to avoid problems on OS X (which fails to
trap 0 divide at all) and Windows (which traps it in some bizarre
nonstandard fashion). Standardize on 'division by zero' as the one true
spelling of this error message. Add regression tests as suggested by
Neil Conway.
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
entire contents of the subplan into the tuplestore before we can return
any tuples. Instead, the tuplestore holds what we've already read, and
we fetch additional rows from the subplan as needed. Random access to
the previously-read rows works with the tuplestore, and doesn't affect
the state of the partially-read subplan. This is a step towards fixing
the problems with cursors over complex queries --- we don't want to
stick in Materialize nodes if they'll prevent quick startup for a cursor.
cleaning out temp namespaces. We don't really want the server log to be
cluttered with 'Drop cascades to table foo' every time someone uses a
temp table...
at database shutdown, and then load it again at database startup. This
preserves our hard-won knowledge of free space across restarts (given
an orderly shutdown, that is).
DELETE of an inheritance tree references another inherited relation.
This bug has been latent since 7.1; I'm still not quite sure why 7.1 and
7.2 don't manifest it (at least, they don't crash on a simple test case).
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
the join, per recent discussion on pgsql-sql. Not clear that this will
come up often in real queries, but it's not any more expensive to do it
right, so we may as well do it right.
is assumed to be in local time, not GMT. This improves consistency with
other operations, which all assume local timezone when it matters. Per
bug #897.
recursion in RewriteQuery(); also, detect recursion in fireRIRrules(),
so as to catch self-referential views per example from Ryan VanderBijl.
Minor code restructuring to make it easier to catch recursive case.
end of a btree index. This isn't super-effective, since we won't move
nondeletable pages, but it's better than nothing. Also, improve stats
displayed during VACUUM VERBOSE.
deleting multiple index entries on a single index page. This makes for
a very substantial reduction in the amount of WAL traffic during a
large delete operation.
service it until after we execute SetThisStartUpID(). Else shutdown
process will write the wrong SUI into the shutdown checkpoint, which
seems likely to be trouble --- although I've not quite figured out
how significant it really is.
setting timezone-related variables during transaction start. They were
not used anyway in platforms that HAVE_TM_ZONE or HAVE_INT_TIMEZONE,
which it appears is *all* the platforms we are currently supporting.
For platforms that have neither, we now only support UTC or numeric-
offset-from-UTC timezones.
now knows what to do upon hitting a dead page (in theory anyway, it's
untested...). Add a post-VACUUM-cleanup entry point for index AMs, to
provide a place for dead-page scavenging to happen.
Also, fix oversight that broke btpo_prev links in temporary indexes.
initdb forced due to additions in pg_am.
support btree compaction, as per proposal of a few days ago. btree index
pages no longer store parent links, instead they have a level indicator
(counting up from zero for leaf pages). The FixBTree recovery logic is
removed, and replaced by code that detects missing parent-level insertions
during WAL replay. Also, generate appropriate WAL entries when updating
btree metapage and when building a btree index from scratch. I believe
btree indexes are now completely WAL-legal for the first time.
initdb forced due to index and WAL changes.
answer when SET TIMEZONE has been done since the start of the current
transaction. Per bug report from Robert Haas.
I plan some futher cleanup in HEAD, but this is a low-risk patch for
the immediate issue in 7.3.
correctly. See following thread for more details.
Subject: [HACKERS] client_encoding directive is ignored in postgresql.conf
From: Tatsuo Ishii <t-ishii@sra.co.jp>
Date: Wed, 29 Jan 2003 22:24:04 +0900 (JST)
- more work from the SGML police
- some grammar improvements: rewriting a paragraph or two, replacing
contractions where (IMHO) appropriate
- fix missing utility commands in lock mode docs
- improve CLUSTER, REINDEX, SET SESSION AUTHORIZATION ref pages
Neil Conway
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
functions which limited the maximum date for a timestamp to AD 1465001.
The new limit is AD 5874897.
The files affected are:
doc/src/sgml/datatype.sgml:
Documentation change due to patch. Included is a notice about
the reduced range when using an eight-byte integer for timestamps.
src/backend/utils/adt/datetime.c:
Replacement functions for j2date() and date2j() functions.
src/include/utils/datetime.h:
Corrected a bug with the limit on the earliest possible date,
Nov 23,-4713 has a Julian day count of -1. The earliest possible
date should be Nov 24, -4713 with a day count of 0.
src/test/regress/expected/horology-no-DST-before-1970.out:
src/test/regress/expected/horology-solaris-1947.out:
src/test/regress/expected/horology.out:
Copies of expected output for regression testing.
Note: Only horology.out has been physically tested. I do not have access
to a Solaris box and I don't know how to provoke the "pre-1970" test.
src/test/regress/sql/horology.sql:
Added some test cases to check extended range.
John Cochran
known problem with failure to respond to 'pg_ctl stop -m fast', and
probable problems if SIGINT or SIGTERM arrives while processing a
SIGUSR2 interrupt that arrived while waiting for a new client query.
in the case where the node immediately above the scan is a Hash, Sort,
or Material node. In these cases it's better to do the projection
so that we don't store unneeded columns in the hash/sort/materialize
table. Per discussion a few days ago with Anagh Lal.
the outer query. (The implementation is a bit klugy, but it would take
nontrivial restructuring to make it nicer, which this is probably not
worth.) This avoids unnecessary sort steps in examples like
SELECT foo,count(*) FROM (SELECT ... ORDER BY foo,bar) sub GROUP BY foo
which means there is now a reasonable technique for controlling the
order of inputs to custom aggregates, even in the grouping case.
of the containing query (which really can only happen in a rule context).
Per example from Brandon Craig Rhodes. Also, make the error message
more specific for the similar case with sub-select in FROM. The revised
coding should be easier to adapt to SQL99's LATERAL(), when we get around
to supporting that.
from Greg Stark. Also, twiddle the FuncCall case to not scribble on
the input structure, which was the proximate cause of the problem.
Someday we ought to fix things so that transformExpr() isn't called
on already-transformed trees ...
> =================================================================
> User interface proposal for multi-row function targetlist entries
> =================================================================
> 1. Only one targetlist entry may return a set.
> 2. Each targetlist item (other than the set returning one) is
> repeated for each item in the returned set.
>
Having gotten no objections (actually, no response at all), I can only
assume no one had heartburn with this change. The attached patch covers
the first of the two proposals, i.e. restricting the target list to only
one set returning function.
Joe Conway
longer works -- IncrHeapAccessStat() didn't actually *do* anything
anymore, so no reason to keep it around AFAICS. I also fixed a
grammatical error in a comment.
Neil Conway
spec, which will also make alter sequence a touch easier.
sequence.c init_params() will check for settings which have been
defined twice, and complain.
Rod Taylor
takes two parameters, an OID x and an integer y, and returns "true" with
probability 1/y (the OID argument is ignored). This can be useful -- for
example, it can be used to select a random sampling of the rows in a
table (which is what the "random" regression test uses it for).
This patch removes that function, because it was old and messy. The old
function had the following problems:
- it was undocumented
- it was poorly named
- it was designed to workaround an optimizer bug that no longer exists
(the OID argument is to ensure that the optimizer won't optimize away
calls to the function; AFAIK marking the function as 'volatile' suffices
nowadays)
- it used a different random-number generation technique than the other
PSRNG-related functions in the backend do (it called random() like they
do, but it had its own logic for setting a set and deciding when to
reseed the RNG).
Ok, this patch removes oidrand(), oidsrand(), and userfntest(), and
improves the SGML docs a little bit (un-commenting the setseed()
documentation).
Neil Conway
On Wed, 2003-01-08 at 21:59, Christopher Kings-Lynne wrote:
> I agree. I want to remove OIDs from heaps of our tables when we go to 7.3.
> I'd rather not have to do it in the dump due to down time.
Rod Taylor <rbt@rbt.ca>
CHECK constraints.
There are apparently no other types of constraint in pg_constraint, so
now all bases are covered. Also, this patch assumes that consrc for a
CHECK constraint is always bracketed so that it's not necessary to add
extra brackets.
Christopher Kings-Lynne
> User interface proposal for multi-row function targetlist entries
> =================================================================
> 1. Only one targetlist entry may return a set.
> 2. Each targetlist item (other than the set returning one) is
> repeated for each item in the returned set.
>
Having gotten no objections (actually, no response at all), I can only assume
no one had heartburn with this change. The attached patch covers the first of
the two proposals, i.e. restricting the target list to only one set returning
function.
It compiles cleanly, and passes all regression tests. If there are no
objections, please apply.
Any suggestions on where this should be documented (other than maybe sql-select)?
Thanks,
Joe
p.s. Here's what the previous example now looks like:
CREATE TABLE bar(f1 int, f2 text, f3 int);
INSERT INTO bar VALUES(1, 'Hello', 42);
INSERT INTO bar VALUES(2, 'Happy', 45);
CREATE TABLE foo(a int, b text);
INSERT INTO foo VALUES(42, 'World');
INSERT INTO foo VALUES(42, 'Everyone');
INSERT INTO foo VALUES(45, 'Birthday');
INSERT INTO foo VALUES(45, 'New Year');
CREATE TABLE foo2(a int, b text);
INSERT INTO foo2 VALUES(42, '!!!!');
INSERT INTO foo2 VALUES(42, '????');
INSERT INTO foo2 VALUES(42, '####');
INSERT INTO foo2 VALUES(45, '$$$$');
CREATE OR REPLACE FUNCTION getfoo(int) RETURNS SETOF text AS '
SELECT b FROM foo WHERE a = $1
' language 'sql';
CREATE OR REPLACE FUNCTION getfoo2(int) RETURNS SETOF text AS '
SELECT b FROM foo2 WHERE a = $1
' language 'sql';
regression=# SELECT f1, f2, getfoo(f3) AS f4 FROM bar;
f1 | f2 | f4
----+-------+----------
1 | Hello | World
1 | Hello | Everyone
2 | Happy | Birthday
2 | Happy | New Year
(4 rows)
regression=# SELECT f1, f2, getfoo(f3) AS f4, getfoo2(f3) AS f5 FROM bar;
ERROR: Only one target list entry may return a set result
Joe Conway
targetlist of a set-operation tree. I'm not sure that this solution
will really stand the test of time --- perhaps we need to make a special
RTE for such vars to refer to. But this quick hack fixes Brandon Craig
Rhodes' complaint of 10-Feb-02 about EXCEPT in CREATE RULE, while not
changing any behavior in the better-tested cases where leftmostRTI is
one anyway.
constraints appearing in outer-join qualification clauses are restricted
as to when and where they can be pushed down. Add regression test
to catch future errors in this area.
codes, per discussion from last March. parse.h should now be included
*only* by gram.y, scan.l, keywords.c, parser.c. This prevents surprising
misbehavior after seemingly-trivial grammar adjustments.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
locParam lists can be converted to bitmapsets to speed updating. Also,
replace 'locParam' with 'allParam', which contains all the paramIDs
relevant to the node (i.e., the union of extParam and locParam); this
saves a step during SetChangedParamList() without costing anything
elsewhere.
Instead of grovelling through pg_class to find them, make use of the
handy dandy dependency mechanism: just delete everything that depends
on our temp schema. Unlike the pg_class scan, the dependency mechanism
is smart enough to delete things in an order that doesn't fall foul of
any dependency restrictions. Fixes problem reported by David Heggie:
a temp table with a serial column may cause a backend FATAL exit at
shutdown time, if it chances to try to delete the temp sequence first.
expression accepted by the regex operators, per discussion yesterday.
Along the way, reduce deadlock_timeout from PGC_POSTMASTER to PGC_SIGHUP
category. It is probably best to insist that all backends share the same
setting, but that doesn't mean it has to be frozen at startup.
(extracted from Tcl 8.4.1 release, as Henry still hasn't got round to
making it a separate library). This solves a performance problem for
multibyte, as well as upgrading our regexp support to match recent Tcl
and nearly match recent Perl.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
nodes where it's not really necessary. In many cases where the scan node
is not the topmost plan node (eg, joins, aggregation), it's possible to
just return the table tuple directly instead of generating an intermediate
projection tuple. In preliminary testing, this reduced the CPU time
needed for 'SELECT COUNT(*) FROM foo' by about 10%.
restriction was debatable to begin with, but it has now become obvious
that it breaks forward-porting of user-defined types; contrib/lo being
the most salient example.
bison 1.875 and later as we did from earlier bison releases. Eventually
we will probably want to adopt the newer message spelling ... but not yet.
Per recent discussion on pgpatches.
Note: I didn't change the build rules for bootstrap, ecpg, or plpgsql
grammars, since these do not affect regression test results.
for type 'time without time zone', as we already did for type
'timestamp without time zone'. This patch was proposed by Tom Lockhart
on 7-Nov-02, but he never got around to applying it. Adjust regression
tests and documentation to match.
cannot actually happen at present because ArrayCount() is only called
on strings beginning with '{', but seems best to prevent it going forward.
Per report from Yichen Xie.
value of MAX_TIME_PRECISION in floating-point-timestamp-storage case
from 13 to 10, which is as much as time_out is actually willing to print.
(The alternative of increasing the number of digits we are willing to
print looks risky; we might find ourselves printing roundoff garbage.)
passed to join selectivity estimators. Make use of this in eqjoinsel
to derive non-bogus selectivity for IN clauses. Further tweaking of
cost estimation for IN.
initdb forced because of pg_proc.h changes.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
necessarily following the JOIN syntax to develop the query plan. The old
behavior is still available by setting GUC variable JOIN_COLLAPSE_LIMIT
to 1. Also create a GUC variable FROM_COLLAPSE_LIMIT to control the
similar decision about when to collapse sub-SELECT lists into their parent
lists. (This behavior existed already, but the limit was always
GEQO_THRESHOLD/2; now it's separately adjustable.)
of the socket file and socket lock file; this should prevent both of them
from being removed by even the stupidest varieties of /tmp-cleaning
script. Per suggestion from Giles Lean.
rather than actually opening the files. This eliminates some corner cases
where the file indeed exists but open() fails for another reason, such
as being out of file descriptors. The net reliability gain is probably
tiny, since xlog.c is full of other file open calls that will elog(PANIC)
if they fail for any reason; but this specific failure mode has been
observed in the field, so we may as well fix it.
of known-equal expressions includes any constant expressions (including
Params from outer queries), we actively suppress any 'var = var'
clauses that are or could be deduced from the set, generating only the
deducible 'var = const' clauses instead. The idea here is to push down
the restrictions implied by the equality set to base relations whenever
possible. Once we have applied the 'var = const' clauses, the 'var = var'
clauses are redundant, and should be suppressed both to save work at
execution and to avoid double-counting restrictivity.
that's selecting into a RECORD variable returns zero rows, make it
assign an all-nulls row to the RECORD; this is consistent with what
happens when the SELECT INTO target is not a RECORD. In support of
this, tweak the SPI code so that a valid tuple descriptor is returned
even when a SPI select returns no rows.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
that used to do it in planner. That was an ancient kluge that was
never satisfactory; errors should be detected at parse time when possible.
But at the time we didn't have the support mechanism (expression_tree_walker
et al) to make it convenient to do in the parser.
simplify callers. It turns out the common case is that the caller
does want to recurse into sub-queries, so push support for that into
these subroutines.
datetime token tables. Even more embarrassing, the regression tests
revealed some of the problems --- but evidently the bogus output wasn't
questioned. Add code to postmaster startup to directly check the tables
for correct ordering, in hopes of not being embarrassed like this again.
join_references(), it's practical to consolidate all join_references()
processing into the set_plan_references traversal in setrefs.c. This
seems considerably cleaner than the old way where we did it for join
quals in createplan.c and for targetlists in setrefs.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
a qualification clause (and hence can get away with being sloppy about
distinguishing FALSE from UNKNOWN). We need to know this in subselect.c;
marking the subplans in setrefs.c is too late.
HAVING quals. Normally this is an insignificant effect --- but it
will not be insignificant when these clauses contain sub-selects.
The added costs cannot affect the planning of the query containing
them, but they might have an impact when the query is a sub-query
of a larger one.
costs for expression evaluation, not only per-tuple cost as before.
This extension is needed in order to deal realistically with hashed or
materialized sub-selects.
>
> I'd suggest that the runtime.sgml description explicitly say "values of
> at least a few thousand are recommended for production installations".
Neil Conway
Simplify SubLink by storing just a List of operator OIDs, instead of
a list of incomplete OpExprs --- that was a bizarre and bulky choice,
with no redeeming social value since we have to build new OpExprs
anyway when forming the plan tree.
'NOT (x IN (subselect))', that is 'NOT (x = ANY (subselect))',
rather than 'x <> ALL (subselect)' as we formerly did. This
opens the door to optimizing NOT IN the same way as IN, whereas
there's no hope of optimizing the expression using <>. Also,
convert 'x <> ALL (subselect)' to the NOT(IN) style, so that
the optimization will be available when processing rules dumped
by older Postgres versions.
initdb forced due to small change in SubLink node representation.
per gripe from Csaba Nagy. There is still potential for platform-specific
behavior for values that are exactly halfway between integers, but at
least we now get the expected answer for all other cases.
believe I didn't notice this before -- once 64k was sent to/from the
server the client would crash. Basicly, in 7.3 the server SSL code set
the initial state to "about to renegotiate" without actually starting
the renegotiation. In addition, the server and client didn't properly
handle the SSL_ERROR_WANT_(READ|WRITE) error. This is fixed in the
second patch.
Nathan Mueller
first, that I missed when checking over 7.3.1, was that the client
method was switched to SSLv23 along with the server. The SSLv23 client
method does SSLv2 by default, but can also understand SSLv3. In our
situation the SSLv2 backwords compatibility is really only needed on the
server. This is the first patch.
The last thing is that I found a way for the server to understand SSLv2
HELLO messages (sent by pre-7.3 clients) but then get them to talk
SSLv3. This is the last one.
Nathan Mueller
> The big problem is that while pg_dump's dump_trigger() looks at
> tginitdeferred and dumps accordingly, pg_get_constraintdef doesn't look
> at tginitdeferred, and therefore doesn't record the requirement as part
> of ALTER TABLE ADD CONSTRAINT.
pg_get_constraintdef should probably be looking at condeferrable and
condeferred in the pg_constraint row it's looking at. Maybe something
like the attached.
(Added, output only non-default values.)
Stephan Szabo
proposal on -hackers a couple days ago. The 'tgenabled' status of the
trigger is consulted when the trigger is added to the deferred queue
(i.e. when the event occurs that fires the trigger), not when the
deferred event is executed.
No regression tests, as another bug prevents them (the pg_trigger row
for a trigger is only loaded once per session, so any changes to it are
not noticed unless the client disconnects and reconnects).
Neil Conway
the index AM when we know we are fetching a unique row. However, this
logic did not consider the possibility that it would be asked to fetch
backwards. Also fix mark/restore to work correctly in this scenario.
previously determined not to be the last segment of a relation.
This reduces the expected cost to one seek, rather than one seek per
segment. We can get away with this because truncation of a relation
will cause a relcache flush and so the md.c file descriptor will be
closed; when it is re-opened we will re-determine the last segment.
match parent table. This used to work, but was broken in 7.3 by
rearrangement of code that handles targetlist sorting. Add a regression
test to catch future breakage.
patches of 9-Dec (permissions fix) and 13-Dec (performance) as well as
a partial fix for locking issues: concurrent DROP COLUMN should not
create trouble anymore. But concurrent DROP TABLE is still a risk, and
there is no protection at all against creating a column of a domain while
we are altering the domain.
columns in DefineIndex. So, ALTER TABLE ... PRIMARY KEY will now
automatically add the NOT NULL constraint. It appeared the alter_table
regression test wanted this to occur, as after the change the regression
test better matched in inline 'fails'/'succeeds' comments.
Rod Taylor
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
computation: reduce the bucket number mod nbatch. This changes the
association between original bucket numbers and batches, but that
doesn't matter. Minor other cleanups in hashjoin code to help
centralize decisions.
"SSLv23_method(void), SSLv23_server_method(void), SSLv23_client_method(void)
A TLS/SSL connection established with these methods will understand the SSLv2,
SSLv3, and TLSv1 protocol. A client will send out SSLv2 client hello messages
and will indicate that it also understands SSLv3 and TLSv1. A server will
understand SSLv2, SSLv3, and TLSv1 client hello messages. This is the best
choice when compatibility is a concern."
This will maintain backwards compatibility for those us that don't use
TLS connections ...
allocation in best_inner_indexscan(). While at it, simplify GEQO's
interface to the main planner --- make_join_rel() offers exactly the
API it really wants, whereas calling make_rels_by_clause_joins() and
make_rels_by_clauseless_joins() required jumping through hoops.
Rewrite gimme_tree for clarity (sometimes iteration is much better than
recursion), and approximately halve GEQO's runtime by recognizing that
tours of the forms (a,b,c,d,...) and (b,a,c,d,...) are equivalent
because of symmetry in make_join_rel().
disallowed by CREATE TABLE (eg, pseudo-types); also disallow these types
from being introduced by the range-function syntax. While at it, allow
CREATE TABLE to create zero-column tables, per recent pghackers discussion.
I am back-patching this into 7.3 since failure to disallow pseudo-types
is arguably a security hole.
practice of evaluating MemSet's arguments multiple times, except for
the special case of newNode(), where we can assume the argument is
a constant sizeof() operator.
Also, add GetMemoryChunkContext() to mcxt.c's API, in preparation for
fixing recent GEQO breakage.
given any malloc block until something is first allocated in it; but
thereafter, MemoryContextReset won't release that first malloc block.
This preserves the quick-reset property of the original policy, without
forcing 8K to be allocated to every context whether any of it is ever
used or not. Also, remove some more no-longer-needed explicit freeing
during ExecEndPlan.
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
failing to find pg_hba.conf should be a fatal error anyway, so I
increased the priority of the elog() from LOG to FATAL and refactored
the code a little bit.
Neil Conway
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
* Add schema, cast, and conversion backslash commands to psql
I had to create a new publically available function,
pg_conversion_is_visible, as it seemed to be missing from the catalogs.
This required me to do no small amount of hacking around in namespace.c
I have updated the \? help and sgml docs.
\dc - list conversions [PATTERN]
\dC - list casts
\dn list schemas
I didn't support patterns with casts as there's nothing obvious to match
against.
Catalog version incremented --- initdb required.
Christopher Kings-Lynne
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
documentation and regression test mods. It seemed small and unobtrusive enough
to not require a specific proposal on the hackers list -- but if not, let me
know and I'll make a pitch. Otherwise, if there are no objections please apply.
Joe Conway
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
cleaning up locale names and nothing else. Since all the locale names
are in plain ASCII I think it will be safe to use ASCII-only lower-case
conversion.
Nicolai Tufar
problems that occur if sublink is referenced via a join alias variable.
Perhaps this can be improved later, but a simple and safe fix is needed
for 7.3.1.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
('SELECT expression') inline, like macros, during the constant-folding
phase of planning. The actual expansion is not difficult, but checking
that we're not changing the semantics of the call turns out to be more
subtle than one might think; in particular must pay attention to
permissions issues, strictness, and volatility.
well as function calls. This is needed for cases where the planner has
constant-folded or inlined the original function call. Possibly we should
back-patch this change into 7.3 branch as well.
and eliminate its manual pfree() calls. This solves the encoding-conversion
bug recently reported, and should be faster and more robust than the
original coding anyway. For example, we are no longer at risk if
datatype output routines leak memory or choose to return a constant string.
logic, dissuade planner from thinking that 'x IS DISTINCT FROM 42' may
be optimized into 'x = 42' (!!), cause dependency on = operator to be
recorded correctly, minor other improvements.
instead of only one. This should speed up planning (only one hash path
to consider for a given pair of relations) as well as allow more effective
hashing, when there are multiple hashable joinclauses.
operations: make sure we use operators that are compatible, as determined
by a mergejoin link in pg_operator. Also, add code to planner to ensure
we don't try to use hashed grouping when the grouping operators aren't
marked hashable.
sublink results and COPY's domain constraint checking. A Const that
isn't really constant is just a Bad Idea(tm). Remove hacks in
parse_coerce and other places that were needed because of the former
klugery.
just done for copyfuncs/equalfuncs. Read functions in particular get
a lot shorter than before, and it's much easier to compare an out function
with the corresponding read function to make sure they agree.
initdb forced due to small changes in nodestring format (regularizing
a few cases that were formerly idiosyncratic).
reliance on macros, in hopes of eliminating silly typos (like copying
to the wrong field) and just generally making it easier to see the forest
instead of the trees. As an example, here is the new code for A_Indices:
static A_Indices *
_copyAIndices(A_Indices *from)
{
A_Indices *newnode = makeNode(A_Indices);
COPY_NODE_FIELD(lidx);
COPY_NODE_FIELD(uidx);
return newnode;
}
static bool
_equalAIndices(A_Indices *a, A_Indices *b)
{
COMPARE_NODE_FIELD(lidx);
COMPARE_NODE_FIELD(uidx);
return true;
}
I plan to redo outfuncs/readfuncs in a similar style, but am committing
what I've got.
joinclauses is determined accurately for each join. Formerly, the code only
considered joinclauses that used all of the rels from the outer side of the
join; thus for example
FROM (a CROSS JOIN b) JOIN c ON (c.f1 = a.x AND c.f2 = b.y)
could not exploit a two-column index on c(f1,f2), since neither of the
qual clauses would be in the joininfo list it looked in. The new code does
this correctly, and also is able to eliminate redundant clauses, thus fixing
the problem noted 24-Oct-02 by Hans-Jürgen Schönig.
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
one more row from the subplan than the COUNT would appear to require.
This costs a little more logic but a number of people have complained
about the old implementation.
results due to doing arithmetic on uninitialized values. Add some
documentation about the AT TIME ZONE construct. Update some other
date/time documentation that seemed out of date for 7.3.
database access outside a transaction; revert bogus performance improvement
in SIBackendInit(); improve comments; add documentation (this part courtesy
Neil Conway).
parameter to allow it to be forced off for comparison purposes.
Add ORDER BY clauses to a bunch of regression test queries that will
otherwise produce randomly-ordered output in the new regime.
of groups produced by GROUP BY. This improves the accuracy of planning
estimates for grouped subselects, and is needed to check whether a
hashed aggregation plan risks memory overflow.
"canceled", so I changed the one remaining usage of the British
spelling ("cancelled") over to the former, and updated the translation
files appropriately.
Neil Conway
The code was not making TupleConstr structs for such catalogs in
several places; with the consequence that the not-null constraint
wasn't actually enforced. With this change,
INSERT INTO pg_proc VALUES('sdf');
generates a 'Fail to add null value' error instead of a core dump.
- CLUSTER ALL clusters all the tables that have some index with
indisclustered set and the calling user owns.
- CLUSTER tablename clusters the named table, using the index with
indisclustered set. If no index has the bit set, throws elog(ERROR).
- The multi-relation version (CLUSTER ALL) uses a multitransaction
approach, similar to what VACUUM does.
Alvaro Herrera
anymore given the mktime() workaround now done in DetermineLocalTimeZone.
This has now been confirmed by Robert Bruccoleri for Irix, and I'm going
to extrapolate to AIX as well.
before commit, not after :-( --- the original coding is not only unsafe
if an error occurs while it's processing, but it generates an invalid
sequence of WAL entries. Resurrect 7.2 logic for deleting items when
no longer needed. Use an enum instead of random macros. Editorialize
on names used for routines and constants. Teach backend/nodes routines
about new field in CreateTable struct. Add a regression test.
>
> ... he is now about to write an inlined version that can go into
> s_lock.h . I'll send the new patch later on...
OK, here it comes:
An inlined version of tas(), that works for both, powerpc and
powerpc64. The patch is against 7.3b5 and passes the test suite on
both architectures.
Reinhard Max
postgres.h or c.h includes a system header (such as stdio.h or
stdlib.h), there's no need to specifically include it in any of the .c
files in the backend.
Neil Conway
in hopes of reducing platform-to-platform variations in its results.
This will cause the geometry regression test to start failing on some
platforms. I plan to update the test later today.
precision for float4, float8, and geometric types. Set it in pg_dump
so that float data can be dumped/reloaded exactly (at least on platforms
where the float I/O support is properly implemented). Initial patch by
Pedro Ferreira, some additional work by Tom Lane.
now)" item on the open items, and subsequent plpgsql function I sent in,
made me realize it was too hard to get the upper and lower bound of an
array. The attached creates two functions that I think will be very
useful when combined with the ability of plpgsql to return sets.
array_lower(array, dim_num)
- and -
array_upper(array, dim_num)
They return the value (as an int) of the upper and lower bound of the
requested dim in the provided array.
Joe Conway
node now does its own grouping of the input rows, and has no need for a
preceding GROUP node in the plan pipeline. This allows elimination of
the misnamed tuplePerGroup option for GROUP, and actually saves more code
in nodeGroup.c than it costs in nodeAgg.c, as well as being presumably
faster. Restructure the API of query_planner so that we do not commit to
using a sorted or unsorted plan in query_planner; instead grouping_planner
makes the decision. (Right now it isn't any smarter than query_planner
was, but that will change as soon as it has the option to select a hash-
based aggregation step.) Despite all the hackery, no initdb needed since
only in-memory node types changed.
a child table already has a matching column. Acquire appropriate
lock on child table; do the right thing with any CHECK constraints
attached to the new parent column.
where it's safe to do database access. Along the way, fix core dump
for 'DEFAULT' parameters to CREATE DATABASE. initdb forced due to
change in pg_proc entry.
(usually bison output files), not as standalone files. This hack
works around flex's insistence on including <stdio.h> before we are
able to include postgres.h; postgres.h will already be read before
the compiler starts to read the flex output file. Needed for largefile
support on some platforms.
core file to be produced for debugging, and avoids trying to run the
normal proc-exit cleanup hooks, which are likely to cause additional
problems if the system is hosed.
between signal handler and enable/disable code, avoid accumulation of
timing error due to trying to maintain remaining-time instead of
absolute-end-time, disable timeout before commit not after.
Only affects machines where MAXALIGN > 4, and is a boundary-condition
case even there, but still surprising that it's not been identified
before. Also reduce tuple chain move give-up messages from WARNING
to DEBUG1, since they are not unexpected conditions.
coercions, not implicit ones. For example, 'select abstime(1035497293)'
should succeed because there is an explicit binary coercion from int4
to abstime.
principled order; in particular ensure that all shared resources
are released before we release transaction locks. The code used
to release locks before buffer pins, which might explain an ancient
note I have about a bufmgr assertion failure I'd seen once several
years ago, and been unable to reproduce since. (Theory: someone
trying to drop a relation might be able to reach FlushRelationBuffers
before the last user of the relation had gotten around to dropping
his buffer pins.)
item, if the page containing the current item is split while the indexscan
is stopped and holds no read-lock on the page. The current item might
move right onto a page that the indexscan holds no pin on. In the prior
code this would allow btbulkdelete to reach and possibly delete the item,
causing 'my bits moved right off the end of the world!' when the indexscan
finally resumes. Fix by chaining read-locks to the right during
_bt_restscan and requiring btbulkdelete to LockBufferForCleanup on every
page it scans, not only those with deletable items. Per my pghackers
message of 25-May-02. (Too bad no one could think of a better way.)
whose conditions might yield NULL. The negated qual to attach to the
original query is properly 'x IS NOT TRUE', not 'NOT x'. This fix
produces correct behavior, but we may be taking a performance hit because
the planner is much stupider about IS NOT TRUE than it is about NOT
clauses. Future TODO: teach prepqual, other parts of planner how to
cope with BooleanTest clauses more effectively.
all utility statement types *except* a short list, per discussion a few
days ago. Add missing SetQuerySnapshot calls in VACUUM and REINDEX,
and guard against calling REINDEX DATABASE from a function (has same
problem as VACUUM).
rather than being reordered according to INSTEAD attribute for
implementation convenience.
Also, increase compiled-in recursion depth limit from 10 to 100 rewrite
cycles. 10 seems pretty marginal for situations where multiple rules
exist for the same query. There was a complaint about this recently,
so I'm going to bump it up. (Perhaps we should make the limit a GUC
parameter, but that's too close to being a new feature to do in beta.)
Ray Ontko 28-June-02. Also, fix prefix_selectivity for NAME lefthand
variables (it was bogusly assuming binary compatibility), and adjust
make_greater_string() to not call pg_mbcliplen() with invalid multibyte
data (this last per bug report that I can't find at the moment, but it
was in July '02).
> in the position that attislocal should be reset. I'll clean everything
> up and submit the patch I had originally made.
All right, this is it. This patch merely checks if child tables have
the column. If atttypid and atttypmod are the same, the attributes'
attinhcount is incremented; else the operation is aborted. If child
tables don't have the column, recursively add it.
attislocal is not touched in any case.
Alvaro Herrera
specifically ceil(), floor(), and sign(). There may be other functions
that need to be added, but this is a start. I've included some simple
regression tests.
Neil Conway
been bit by the fact that the locale functions return pointers to
modifiable variables. I added some comments that might help us avoid
the mistake in future.
command status at the interactive level. SPI_processed, etc are set
in the same way as the returned command status would have been set if
the same querystring were issued interactively. Per gripe from
Michael Paesold 25-Sep-02.
query that uses it. This ensures that triggers will be applied consistently
throughout a query even if someone commits changes to the relation's
pg_class.reltriggers field meanwhile. Per crash report from Laurette Cisneros.
While at it, simplify memory management in relcache.c, which no longer
needs the old hack to try to keep trigger info in the same place over
a relcache entry rebuild. (Should try to fix rd_att and rewrite-rule
access similarly, someday.) And make RelationBuildTriggers simpler and
more robust by making it build the trigdesc in working memory and then
CopyTriggerDesc() into cache memory.
ANALYZE is not quite clear when branches of the query are never
executed. So this tiny patch fixes that.
The patch is attached and can also be found at:
http://svana.org/kleptog/pgsql/pgsql-explain.patch
Martijn van Oosterhout
> > > > found in the postmaster and not included from elsewhere)
> >
> > shared libs on AIX need to be able to resolve all symbols at linkage time.
> > Those two symbols are in backend/utils/SUBSYS.o but not in the postgres
> > executable.
>
> They are defined in backend/utils/mb/conv.c and declared in
> include/mb/pg_wchar.h. They're also linked into the
> postmaster. I don't see anything unusual.
Attached is a patch to fix the mb linking problems on AIX. As a nice side effect
it reduces the duplicate symbol warnings to linking libpq.so and libecpg.so
(all shlibs that are not postmaster loadable modules).
Please apply to current (only affects AIX).
The _LARGE_FILES problem is unfortunately still open, unless Peter
has fixed it per his recent idea.
Zeugswetter Andreas SB SD
into postgres.c; make sure it happens for all cases that seem to need it.
Perhaps it would be better to explicitly exclude just a few utility
statement types from setting a snapshot?
in our write/flush operation any WAL entries that got queued while we
were waiting to get the WALWriteLock. This improves throughput when
transactions are small enough that several can be committed per WAL
write (ie, per disk revolution).
discussion some weeks ago. Also, add a check that two types to be
binary-equivalenced match as to typlen, typbyval, and typalign; if
they don't then it's surely a mistake to equivalence them.
just the significant fields of FunctionCallInfoData, rather than MemSet'ing
the whole struct to zero. Unused positions in the arg[] array will
thereby contain garbage rather than zeroes. This buys back some of the
performance hit from increasing FUNC_MAX_ARGS. Also tweak tuplesort.c
code for more speed by marking some routines 'inline'. All together
these changes speed up simple sorts, like count(distinct int4column),
by about 25% on a P4 running RH Linux 7.2.
client
utilities (libpq.dll and psql.exe) for win32 (missing defines,
adjustments to
includes, pedantic casting, non-existent functions) per:
http://developer.postgresql.org/docs/postgres/install-win32.html.
It compiles cleanly under Windows 2000 using Visual Studio .net. Also
compiles clean and passes all regression tests (regular and contrib)
under Linux.
In addition to a review by the usual suspects, it would be very
desirable for someone well versed in the peculiarities of win32 to take
a look.
Joe Conway
so that precision of result is always at least as good as you'd get from
float8 arithmetic (ie, always at least 16 digits of accuracy). Per
pg_hackers discussion a few days ago.
Vacuum must not advance pg_database.datvacuumxid nor truncate CLOG
unless it's processed *all* tables in the database. Vacuums run by
unprivileged users don't count.
(Beats head against nearest convenient wall...)
no reason to worry about the tuple commit status bits until the tuple
is inserted in a relation by heapam.c. Also, improve comments for
heap_addheader().