When commit 3e23b68dac introduced
single-byte varlena headers, its fmgr.h changes presented
PG_GETARG_TEXT_PP() and PG_GETARG_TEXT_P() as equals. Its postgres.h
changes presented PG_DETOAST_DATUM_PACKED() and VARDATA_ANY() as the
exceptional case. Now, instead, firmly recommend PG_GETARG_TEXT_PP()
over PG_GETARG_TEXT_P(); likewise for other ...PP() macros. This shaves
cycles and invites consistency of style.
When one of the kernel calls in the socket()/bind()/listen() sequence
fails, include the specific address we're trying to bind to in the log
message. This greatly eases debugging of network misconfigurations.
Also, after successfully setting up a listen socket, report its address
in the log, to ease verification that the expected addresses were bound.
There was some debate about whether to print this message at LOG level or
only DEBUG1, but the majority of votes were for the former.
Discussion: https://postgr.es/m/9564.1489091245@sss.pgh.pa.us
Seven of the eight other relkind codes are lower-case, so it wasn't
consistent for this one to be upper-case. Fix it while we still can.
Historical notes: the reason for the lone exception, i.e. sequences being
'S', is that 's' was once used for "special" relations. Also, at one time
the partitioned-tables patch used both 'P' and 'p', but that got changed,
leaving only a surprising choice behind.
This also fixes a couple little bits of technical debt, such as
type_sanity.sql not knowing that 'm' is a legal value for relkind.
Discussion: https://postgr.es/m/27899.1488909319@sss.pgh.pa.us
This is the beginning of a collection of SQL-callable functions to
verify the integrity of data files. For now it only contains code to
verify B-Tree indexes.
This adds two SQL-callable functions, validating B-Tree consistency to
a varying degree. Check the, extensive, docs for details.
The goal is to later extend the coverage of the module to further
access methods, possibly including the heap. Once checks for
additional access methods exist, we'll likely add some "dispatch"
functions that cover multiple access methods.
Author: Peter Geoghegan, editorialized by Andres Freund
Reviewed-By: Andres Freund, Tomas Vondra, Thomas Munro,
Anastasia Lubennikova, Robert Haas, Amit Langote
Discussion: CAM3SWZQzLMhMwmBqjzK+pRKXrNUZ4w90wYMUWfkeV8mZ3Debvw@mail.gmail.com
initdb now initializes a pg_hba.conf that allows replication connections
from the local host, same as it does for regular connections. The
connecting user still needs to have the REPLICATION attribute or be a
superuser.
The intent is to allow pg_basebackup from the local host to succeed
without requiring additional configuration.
Michael Paquier <michael.paquier@gmail.com> and me
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
This exposes the existing explain summary option to users to allow them
to choose if they wish to have the planning time and totalled run time
included in the EXPLAIN result. The existing default behavior is
retained if SUMMARY is not specified- running explain without analyze
will not print the summary lines (just the planning time, currently)
while running explain with analyze will include the summary lines (both
the planning time and the totalled execution time).
Users who wish to see the summary information for plain explain can now
use: EXPLAIN (SUMMARY ON) query; Users who do not want to have the
summary printed for an analyze run can use:
EXPLAIN (ANALYZE ON, SUMMARY OFF) query;
With this, we can now also have EXPLAIN ANALYZE queries included in our
regression tests by using:
EXPLAIN (ANALYZE ON, TIMING OFF, SUMMARY off) query;
I went ahead and added an example of this, which will hopefully not make
the buildfarm complain.
Author: Ashutosh Bapat
Discussion: https://postgr.es/m/CAFjFpReE5z2h98U2Vuia8hcEkpRRwrauRjHmyE44hNv8-xk+XA@mail.gmail.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
As before, create an INSTALL.html file for processing with lynx, but use
xsltproc and a new XSLT stylesheet instead of jade and DSSSL.
Replacing jade with xsltproc removes jade from the requirements for
distribution building.
Reviewed-by: Magnus Hagander <magnus@hagander.net>
When a shared iterator is used, each call to tbm_shared_iterate()
returns a result that has not yet been returned to any process
attached to the shared iterator. In other words, each cooperating
processes gets a disjoint subset of the full result set, but all
results are returned exactly once.
This is infrastructure for parallel bitmap heap scan.
Dilip Kumar. The larger patch set of which this is a part has been
reviewed and tested by (at least) Andres Freund, Amit Khandekar,
Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and Thomas Munro.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
Define GUCs pltcl.start_proc and pltclu.start_proc. When set to a
nonempty value at the time a new Tcl interpreter is created, the
parameterless pltcl or pltclu function named by the GUC is called to
allow user-controlled initialization to occur within the interpreter.
This is modeled on plv8's start_proc parameter, and also has much in
common with plperl's on_init feature. It allows users to fully
replace the "modules" feature that was removed in commit 817f2a586.
Since an initializer function could subvert later Tcl code in nearly
arbitrary ways, mark both GUCs as SUSET for now. It would be nice
to find a way to relax that someday; but the corresponding GUCs in
plperl are also SUSET, and there's not been much complaint.
Discussion: https://postgr.es/m/22067.1488046447@sss.pgh.pa.us
It can often be useful to use expanded mode output (\x) for just a
single query. Introduce a \gx which acts exactly like \g except that it
will force expanded output mode for that one \gx call. This is simpler
than having to use \x as a toggle and also means that the user doesn't
have to worry about the current state of the expanded variable, or
resetting it later, to ensure a given query is always returned in
expanded mode.
Primairly Christoph's patch, though I did tweak the documentation and help
text a bit, and re-indented the tab completion section.
Author: Christoph Berg
Reviewed By: Daniel Verite
Discussion: https://postgr.es/m/20170127132737.6skslelaf4txs6iw%40msg.credativ.de
Add new option --no-role-passwords which dumps roles without passwords.
Since we don’t need passwords, we choose to use pg_roles in preference
to pg_authid since access may be restricted for security reasons in
some configrations.
Robins Tharakan and Simon Riggs
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
Combine DROP of FOREIGN DATA WRAPPER, SERVER, POLICY, RULE, and TRIGGER
into generic DropStmt grammar.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The generic drop support already supported dropping multiple objects of
the same kind at once. But the previous representation
of function signatures across two grammar symbols and structure members
made this cumbersome to do for functions, so it was not supported. Now
that function signatures are represented by a single structure, it's
trivial to add this support. Same for aggregates and operators.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Disallow CREATE SUBSCRIPTION and DROP SUBSCRIPTION in a transaction
block when the replication slot is to be created or dropped, since that
cannot be rolled back.
based on patch by Masahiko Sawada <sawada.mshk@gmail.com>
Add tab completion for publications and subscriptions. Also, to be able
to get a list of subscriptions, make pg_subscription world-readable but
revoke access to subconninfo using column privileges.
From: Michael Paquier <michael.paquier@gmail.com>
The syslogger will write out the current stderr and csvlog names, if
it's running and there are any, to a new file in the data directory
called "current_logfiles". We take care to remove this file when it
might no longer be valid (but not at shutdown). The function
pg_current_logfile() can be used to read the entries in the file.
Gilles Darold, reviewed and modified by Karl O. Pinc, Michael
Paquier, and me. Further review by Álvaro Herrera and Christoph Berg.
Also, recursively perform VACUUM and ANALYZE on partitions when the
command is applied to a partitioned table. In passing, some related
documentation updates.
Amit Langote, reviewed by Michael Paquier, Ashutosh Bapat, and by me.
Discussion: http://postgr.es/m/47288cf1-f72c-dfc2-5ff0-4af962ae5c1b@lab.ntt.co.jp
Previously, only IndexTuple format was supported for the output data of
an index-only scan. This is fine for btree, which is just returning a
verbatim index tuple anyway. It's not so fine for SP-GiST, which can
return reconstructed data that's much larger than a page.
To fix, extend the index AM API so that index-only scan data can be
returned in either HeapTuple or IndexTuple format. There's other ways
we could have done it, but this way avoids an API break for index AMs
that aren't concerned with the issue, and it costs little except a couple
more fields in IndexScanDescs.
I changed both GiST and SP-GiST to use the HeapTuple method. I'm not
very clear on whether GiST can reconstruct data that's too large for an
IndexTuple, but that seems possible, and it's not much of a code change to
fix.
Per a complaint from Vik Fearing. Reviewed by Jason Li.
Discussion: https://postgr.es/m/49527f79-530d-0bfe-3dad-d183596afa92@2ndquadrant.fr
PL/Tcl has long had a facility whereby Tcl code could be autoloaded from
a database table named "pltcl_modules". However, nobody is using it, as
evidenced by the recent discovery that it's never been fixed to work with
standard_conforming_strings turned on. Moreover, it's rather shaky from
a security standpoint, and the table design is very old and crufty (partly
because it dates from before we had TOAST). A final problem is that
because the table-population scripts depend on the Tcl client library
Pgtcl, which we removed from the core distribution in 2004, it's
impossible to create a self-contained regression test for the feature.
Rather than try to surmount these problems, let's just remove it.
A follow-on patch will provide a way to execute user-defined
initialization code, similar to features that exist in plperl and plv8.
With that, it will be possible to implement this feature or similar ones
entirely in userspace, which is where it belongs.
Discussion: https://postgr.es/m/22067.1488046447@sss.pgh.pa.us
Output a message about checkpoint starting in verbose mode of
pg_basebackup, and make the documentation state more clearly that this
happens.
Author: Michael Banck
This is expected to be useful mostly when performing such scans in
parallel, because in that case it allows (in combination with commit
acf555bc53) nodes below a Gather to get
control just before the DSM segment goes away.
KaiGai Kohei, except that I rewrote the documentation. Reviewed by
Claudio Freire.
Discussion: http://postgr.es/m/CADyhKSXJK0jUJ8rWv4AmKDhsUh124_rEn39eqgfC5D8fu6xVuw@mail.gmail.com
Previously the pg_upgrade standby upgrade instructions said not to
execute pgcrypto.sql, but it should have referenced the extension
command "CREATE EXTENSION pgcrypto". This patch makes that doc change.
Reported-by: a private bug report
Backpatch-through: 9.4, where standby instructions were added
We don't need it any more.
pg_controldata continues to report that date/time type storage is
"64-bit integers", but that's now a hard-wired behavior not something
it sees in the data. This avoids breaking pg_upgrade, and perhaps other
utilities that inspect pg_control this way. Ditto for pg_resetwal.
I chose to remove the "bigint_timestamps" output column of
pg_control_init(), though, as that function hasn't been around long
and probably doesn't have ossified users.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Per discussion, the time has come to do this. The handwriting has been
on the wall at least since 9.0 that this would happen someday, whenever
it got to be too much of a burden to support the float-timestamp option.
The triggering factor now is the discovery that there are multiple bugs
in the code that attempts to implement use of integer timestamps in the
replication protocol even when the server is built for float timestamps.
The internal float timestamps leak into the protocol fields in places.
While we could fix the identified bugs, there's a very high risk of
introducing more. Trying to build a wall that would positively prevent
mixing integer and float timestamps is more complexity than we want to
undertake to maintain a long-deprecated option. The fact that these
bugs weren't found through testing also indicates a lack of interest
in float timestamps.
This commit disables configure's --disable-integer-datetimes switch
(it'll still accept --enable-integer-datetimes, though), removes direct
references to USE_INTEGER_DATETIMES, and removes discussion of float
timestamps from the user documentation. A considerable amount of code is
rendered dead by this, but removing that will occur as separate mop-up.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
There is no specific reason for this right now, but keeping support for
old Python versions around indefinitely increases the maintenance
burden. The oldest supported Python version is now Python 2.4, which is
still shipped in RHEL/CentOS 5 by default.
In configure, add a check for the required Python version and give a
friendly error message for an old version, instead of relying on an
obscure build error later on.
These are only supported in to_char, not in the other direction, but the
documentation failed to mention that. Also, describe TZ/tz as printing the
time zone "abbreviation", not "name", because what they print is elsewhere
referred to that way. Per bug #14558.
Also add to the existing rather half-baked description of PROFILE,
which does exactly the same thing, but I think people use it differently.
Discussion: https://postgr.es/m/16461.1487361849@sss.pgh.pa.us
This causes a warning with the old html-docs toolchain, though not with the
new. I had originally supposed that we needed both <indexterm> entries to
get both a primary index entry and a see-also link; but evidently not,
as pointed out by Fabien Coelho.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1702161616060.5445@lancre
Michael Meskes
Noah Misch
Tom Lane
Peter Eisentraut
Andres Freund
Robert Haas
Stephen Frost
Alvaro Herrera
Magnus Hagander
Simon Riggs
Heikki Linnakangas
Bruce Momjian