Instability in the test for pg_walinspect revealed that
pg_get_wal_records_info_till_end_of_wal(x) would try to decode all the
records with a start LSN earlier than the flush LSN, even though that
might include a partial record at the end of the range. In that case,
read_local_xlog_page_no_wait() would return NULL when it tried to read
past the flush LSN, which would be interpreted as an error by the
caller. That caused a test failure only on a BF animal that had been
restarted recently, but could be expected to happen in the wild quite
easily depending on the alignment of various parameters.
Fix by using private data in read_local_xlog_page_no_wait() to signal
end-of-wal to the caller, so that it can be properly distinguished
from a real error.
Discussion: https://postgr.es/m/Ymd/e5eeZMNAkrXo%40paquier.xyz
Discussion: https://postgr.es/m/111657.1650910309@sss.pgh.pa.us
Authors: Thomas Munro, Bharath Rupireddy.
This reverts commits 2c902bb and ccfbd92. Per buildfarm members
kestrel, rorqual and calliphoridae, the assertions checking that a TLI
history file should not exist when created by a WAL receiver have been
failing, and switching to durable_rename() over durable_rename_excl()
would cause the newest TLI history file to overwrite the existing one.
We need to think harder about such cases, so revert the new logic for
now.
Note that all the failures have been reported in the test
025_stuck_on_old_timeline.
Discussion: https://postgr.es/m/511362.1651116498@sss.pgh.pa.us
durable_rename_excl() attempts to avoid overwriting any existing files
by using link() and unlink(), falling back to rename() on some platforms
(e.g., Windows where link() followed by unlink() is not concurrent-safe,
see 909b449). Most callers of durable_rename_excl() use it just in case
there is an existing file, but it happens that for all of them we never
expect a target file to exist (WAL segment recycling, creation of
timeline history file and basic_archive).
basic_archive used durable_rename_excl() to avoid overwriting an archive
concurrently created by another server. Now, there is a stat() call to
avoid overwriting an existing archive a couple of lines above, so note
that this change opens a small TOCTOU window in this module between the
stat() call and durable_rename().
Furthermore, as mentioned in the top comment of durable_rename_excl(),
this routine can result in multiple hard links to the same file and data
corruption, with two or more links to the same file in pg_wal/ if a
crash happens before the unlink() call during WAL recycling.
Specifically, this would produce links to the same file for the current
WAL file and the next one because the half-recycled WAL file was
re-recycled during crash recovery of a follow-up cluster restart.
This change replaces all calls to durable_rename_excl() with
durable_rename(). This removes the protection against accidentally
overwriting an existing file, but some platforms are already living
without it, and all those code paths never expect an existing file (a
couple of assertions are added to check after that, in case).
This is a bug fix, but knowing the unlikeliness of the problem involving
one of more crashes at an exceptionally bad moment, no backpatch is
done. This could be revisited in the future.
Author: Nathan Bossart
Reviewed-by: Robert Haas, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20220407182954.GA1231544@nathanxps13
Commit aa0105141 assigned fixed OIDs to template0 and postgres
in a very ad-hoc way. Notably, instead of teaching Catalog.pm
about these OIDs, the unused_oids script was just hacked to
not show them as unused. That's problematic since, for example,
duplicate_oids wouldn't report any future conflict. Hence,
invent a macro DECLARE_OID_DEFINING_MACRO() that can be used to
define an OID that is known to Catalog.pm and will participate
in duplicate-detection as well as renumbering by renumber_oids.pl.
(We don't anticipate renumbering these particular OIDs, but we
might as well build out all the Catalog.pm infrastructure while
we're here.)
Another issue is that aa0105141 neglected to touch IsPinnedObject,
with the result that it now claimed template0 and postgres are
pinned. The right thing to do there seems to be to teach it that
no database is pinned, since in fact DROP DATABASE doesn't check
for pinned-ness (and at least for these cases, that is an
intentional choice). It's not clear whether this wrong answer
had any visible effect, but perhaps it could have resulted in
erroneous management of dependency entries.
In passing, rename the TemplateDbOid macro to Template1DbOid
to reduce confusion (likely we should have done that way back
when we invented template0, but we didn't), and rename the
OID macros for template0 and postgres to have a similar style.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2935358.1650479692@sss.pgh.pa.us
Suppress further attempts to read ahead in the WAL if we run out of
data, until the records already decoded have been replayed. This
restores the traditional behavior for continuous archive recovery, which
is to retry the failing restore_command only every 5 seconds. With the
coding in 5dc0418f, we would start retrying every time through the
recovery loop when our WAL decoding window hit the end of the current
segment and we tried to look ahead into a not-yet-available next file.
That was very slow.
Also change the no_readahead_until mechanism to use <= rather than <,
which seems more useful. Otherwise we'd either get one extra unwanted
retry of restore_command, or we'd need to add 1 to an LSN.
No change in behavior for regular streaming. That was already limited
by the flushedUpto variable, which won't be updated until we replay what
we have already.
Reported by Andres Freund while analyzing the failure of a TAP test on
build farm animal skink (investigation ongoing but probably due to
otherwise unrelated timing bugs triggered by this slowness magnified by
valgrind).
Discussion: https://postgr.es/m/20220409005910.alw46xqmmgny2sgr%40alap3.anarazel.de
Per-backend global variables like VacuumPageHit are initialized once per
VACUUM command. This was missed by commit 49c9d9fc, which unified
VACUUM VERBOSE and autovacuum logging. As a result of that oversight,
incorrect values were shown when multiple relations were processed by a
single VACUUM VERBOSE command.
Relations that happened to be processed later on would show "buffer
usage:" values that incorrectly included buffer accesses made while
processing earlier unrelated relations. The same accesses were counted
multiple times.
To fix, take initial values for the tracker variables at the start of
heap_vacuum_rel(), and report delta values later on.
Be consistent about the lines that VACUUM VERBOSE outputs by including
an "index scan not needed: " line for completely empty tables. This
makes the output more readable, especially with multiple distinct VACUUM
operations processed by the same VACUUM command. It's also more
consistent; even empty tables can use the failsafe, which wasn't
reported in the standard way until now.
Follow-up to commit 6e20f460, which taught VACUUM VERBOSE to be more
consistent about reporting on scanned pages with empty tables.
The age of OldestXmin (a.k.a. "removable cutoff") when VACUUM ends often
indicates the approximate number of XIDs consumed while VACUUM ran.
However, there is at least one important exception: the cutoff could be
held back by a snapshot that was acquired before our VACUUM even began.
Successive VACUUM operations may even use exactly the same old cutoff in
extreme cases involving long held snapshots.
The log messages that described how removable cutoff aged (which were
added by commit 872770fd) created the impression that we were reporting
on how VACUUM's usable cutoff advanced while VACUUM ran, which was
misleading in these extreme cases. Fix by using a more general wording.
Per gripe from Tom Lane.
In passing, relocate related instrumentation code for clarity.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/1643035.1650035653@sss.pgh.pa.us
heap_fetch() used to have a "keep_buf" parameter that told it to return
ownership of the buffer pin to the caller after finding that the
requested tuple TID exists but is invisible to the specified snapshot.
This was thoughtlessly removed in commit 5db6df0c0, which broke
heapam_tuple_lock() (formerly EvalPlanQualFetch) because that function
needs to do more accesses to the tuple even if it's invisible. The net
effect is that we would continue to touch the page for a microsecond or
two after releasing pin on the buffer. Usually no harm would result;
but if a different session decided to defragment the page concurrently,
we could see garbage data and mistakenly conclude that there's no newer
tuple version to chain up to. (It's hard to say whether this has
happened in the field. The bug was actually found thanks to a later
change that allowed valgrind to detect accesses to non-pinned buffers.)
The most reasonable way to fix this is to reintroduce keep_buf,
although I made it behave slightly differently: buffer ownership
is passed back only if there is a valid tuple at the requested TID.
In HEAD, we can just add the parameter back to heap_fetch().
To avoid an API break in the back branches, introduce an additional
function heap_fetch_extended() in those branches.
In HEAD there is an additional, less obvious API change: tuple->t_data
will be set to NULL in all cases where buffer ownership is not returned,
in particular when the tuple exists but fails the time qual (and
!keep_buf). This is to defend against any other callers attempting to
access non-pinned buffers. We concluded that making that change in back
branches would be more likely to introduce problems than cure any.
In passing, remove a comment about heap_fetch that was obsoleted by
9a8ee1dc6.
Per bug #17462 from Daniil Anisimov. Back-patch to v12 where the bug
was introduced.
Discussion: https://postgr.es/m/17462-9c98a0f00df9bd36@postgresql.org
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
All but a few existing callers assume without checking that this
function succeeds. While it probably will, that's a poor excuse for
not checking. Let's make it return void and instead throw an error
if it doesn't find the block reference. Callers that actually need
to handle the no-such-block case must now use the underlying function
XLogRecGetBlockTagExtended.
In addition to being a bit less error-prone, this should also serve
to suppress some Coverity complaints about XLogRecGetBlockRefInfo.
While at it, clean up some inconsistency about use of the
XLogRecHasBlockRef macro: make XLogRecGetBlockTagExtended use
that instead of open-coding the same condition, and avoid calling
XLogRecHasBlockRef twice in relevant code paths. (That is,
calling XLogRecHasBlockRef followed by XLogRecGetBlockTag is now
deprecated: use XLogRecGetBlockTagExtended instead.)
Patch HEAD only; this doesn't seem to have enough value to consider
a back-branch API break.
Discussion: https://postgr.es/m/425039.1649701221@sss.pgh.pa.us
Remove comment block about how heap page vacuuming used to set tuples
with storage to LP_UNUSED in a rare edge case that can no longer happen
following commit 8523492d4e. The comments seem unnecessary now, since
it's now generally clear that heap vacuuming only applies to LP_DEAD
items from VACUUM's first heap pass following more recent work from
commits 12b5ade902 and 4f8d9d1217.
As of commit 39969e2a1, no caller of do_pg_backup_start() passes NULL
for labelfile or tblspcmapfile, nor is it plausible that any would
do so in the future. Remove the code that coped with that case,
as (a) it's dead and (b) it causes Coverity to bleat about possibly
leaked storage.
While here, do some janitorial work on the function's header comment.
Before commit 412ad7a556, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
These are usually not useful since users will use packaged
distributions and won't be interested in rebuilding their installation
from source. Also, we have only used these kinds of hints for some
features and in some places, not consistently throughout.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2552aed7-d0e9-280a-54aa-2dc7073f371d%40enterprisedb.com
Reclaim space from the line pointer array when heap pruning leaves
behind a contiguous group of LP_UNUSED items at the end of the array.
This happens during subsequent page defragmentation. Certain kinds of
heap line pointer bloat are ameliorated by this new optimization.
Follow-up work to commit 3c3b8a4b26, which taught VACUUM to truncate the
line pointer array in about the same way during VACUUM's second pass
over the heap. We now apply line pointer array truncation during both
the first and the second pass over the heap made by VACUUM. We can also
perform line pointer array truncation during opportunistic pruning.
Matthias van de Meent, with small tweaks by me.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAEze2Wg36%2B4at2eWJNcYNiW2FJmht34x3YeX54ctUSs7kKoNcA%40mail.gmail.com
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Change two macros to be static inline functions instead to keep the
data type consistent. This avoids a "comparison is always true"
warning that was occurring with -Wtype-limits. In the process, change
the names to look less like macros.
Discussion: https://postgr.es/m/20220407063505.njnnrmbn4sxqfsts@alap3.anarazel.de
Broke with 5c279a6d35. But looks like it had been half-broken since
70e81861fa, because 'rmid' didn't refer to the current record's rmid anymore,
but to rmid from "Initialize resource managers" - a constant.
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
This change affects SubTransGetTopmostTransaction(), used to find the
topmost transaction ID of a given transaction ID. The cache is able to
store one value, so as we can save the backend from unnecessary lookups
at pg_subtrans/ on repetitive calls of this routine. There is a similar
practice in transam.c, for example.
Author: Simon Riggs
Reviewed-by: Andrey Borodin, Julien Rouhaud
Discussion: https://postgr.es/m/CANbhV-G8Co=yq4v4BkW7MJDqVt68K_8A48nAZ_+8UQS7LrwLEQ@mail.gmail.com
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
Most of pgstat uses pgstat_<verb>_<subject>() or just <verb>_<subject>(). But
not all (some introduced fairly recently by me). Rename ones that aren't
intentionally following a different scheme (e.g. AtEOXact_*).
One problematic part of the current statistics collector design is that there
is no reliable way of getting rid of statistics entries. Because of that
pgstat_vacuum_stat() (called by [auto-]vacuum) matches all stats for the
current database with the catalog contents and tries to drop now-superfluous
entries. That's quite expensive. What's worse, it doesn't work on physical
replicas, despite physical replicas collection statistics entries.
This commit introduces infrastructure to create / drop statistics entries
transactionally, together with the underlying catalog objects (functions,
relations, subscriptions). pgstat_xact.c maintains a list of stats entries
created / dropped transactionally in the current transaction. To ensure the
removal of statistics entries is durable dropped statistics entries are
included in commit / abort (and prepare) records, which also ensures that
stats entries are dropped on standbys.
Statistics entries created separately from creating the underlying catalog
object (e.g. when stats were previously lost due to an immediate restart)
are *not* WAL logged. However that can only happen outside of the transaction
creating the catalog object, so it does not lead to "leaked" statistics
entries.
For this to work, functions creating / dropping functions / relations /
subscriptions need to call into pgstat. For subscriptions this was already
done when dropping subscriptions, via pgstat_report_subscription_drop() (now
renamed to pgstat_drop_subscription()).
This commit does not actually drop stats yet, it just provides the
infrastructure. It is however a largely independent piece of infrastructure,
so committing it separately makes sense.
Bumps XLOG_PAGE_MAGIC.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This replaces the bool flag for randomAccess. An upcoming patch requires
adding another option, so instead of breaking the API for that, then
breaking it again one day if we add more options, let's just break it
once. Any boolean options we add in the future will just make use of an
unused bit in the flags.
Any extensions making use of tuplesorts will need to update their code
to pass TUPLESORT_RANDOMACCESS instead of true for randomAccess.
TUPLESORT_NONE can be used for a set of empty options.
Author: David Rowley
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf%2B%2B8JJ0paw%2B03dk%2BW25tQEcNQ%40mail.gmail.com
Here we make a series of improvements to the generation memory
allocator, namely:
1. Allow generation contexts to have a minimum, initial and maximum block
sizes. The standard allocator allows this already but when the generation
context was added, it only allowed fixed-sized blocks. The problem with
fixed-sized blocks is that it's difficult to choose how large to make the
blocks. If the chosen size is too small then we'd end up with a large
number of blocks and a large number of malloc calls. If the block size is
made too large, then memory is wasted.
2. Add support for "keeper" blocks. This is a special block that is
allocated along with the context itself but is never freed. Instead,
when the last chunk in the keeper block is freed, we simply mark the block
as empty to allow new allocations to make use of it.
3. Add facility to "recycle" newly empty blocks instead of freeing them
and having to later malloc an entire new block again. We do this by
recording a single GenerationBlock which has become empty of any chunks.
When we run out of space in the current block, we check to see if there is
a "freeblock" and use that if it contains enough space for the allocation.
Author: David Rowley, Tomas Vondra
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/d987fd54-01f8-0f73-af6c-519f799a0ab8@enterprisedb.com
Non-aggressive VACUUMs were at a gratuitous disadvantage (relative to
aggressive VACUUMs) around advancing relfrozenxid and relminmxid before
now. The issue only came up when concurrent activity unset some heap
page's visibility map bit right as VACUUM was considering if the page
should get counted in frozenskipped_pages. The non-aggressive case
would recheck the all-frozen bit at this point. The aggressive case
reasoned that the page (a skippable page) must have at least been
all-frozen in the recent past, so skipping it won't make relfrozenxid
advancement unsafe (which is never okay for aggressive VACUUMs).
The recheck created a window for some other backend to confuse matters
for VACUUM. If the page's VM bit turned out to be unset, VACUUM would
conclude that the page was _never_ all-frozen. frozenskipped_pages was
not incremented, and yet VACUUM couldn't back out of skipping at this
late stage (it couldn't choose to scan the page instead). This made it
unsafe to advance relfrozenxid later on.
Consistently avoid the issue by generalizing how we skip frozen pages
during aggressive VACUUMs: take the same approach when skipping any
skippable page range during aggressive and non-aggressive VACUUMs alike.
The new approach makes ranges (not individual pages) the fundamental
unit of skipping using the visibility map. frozenskipped_pages is
replaced with a boolean flag that represents whether some skippable
range with one or more all-visible pages was actually skipped.
It is safe for VACUUM to treat a page as all-frozen provided it at least
had its all-frozen bit set after the OldestXmin cutoff was established.
VACUUM is only required to scan pages that might have XIDs < OldestXmin
(unfrozen XIDs) to be able to safely advance relfrozenxid. Tuples
concurrently inserted on "skipped" pages can be thought of as equivalent
to tuples concurrently inserted on a block >= rel_pages.
It's possible that the issue this commit fixes hardly ever came up in
practice. But we only had to be unlucky once to lose out on advancing
relfrozenxid -- a single affected heap page was enough to throw VACUUM
off. That seems like something to avoid on general principle. This is
similar to an issue fixed by commit 44fa8488, which taught vacuumlazy.c
to not give up on non-aggressive relfrozenxid advancement just because a
cleanup lock wasn't immediately available on some heap page.
Skipping an all-visible range is now explicitly structured as a choice
made by non-aggressive VACUUMs, by weighing known costs (scanning extra
skippable pages to freeze their tuples early) against known benefits
(advancing relfrozenxid early). This works in essentially the same way
as it always has (don't skip ranges < SKIP_PAGES_THRESHOLD). We could
do much better here in the future by considering other relevant factors.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzn6bGJGfOy3zSTJicKLw99PHJeSOQBOViKjSCinaxUKDQ@mail.gmail.com
Discussion: https://postgr.es/m/CA%2BTgmoZiSOY6H7aadw5ZZGm7zYmfDzL6nwmL5V7GL4HgJgLF_w%40mail.gmail.com
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
Move some of the heap_vacuum_rel() instrumentation related variables to
the scope where they're actually needed. Also reorder some of the
variable declarations at the start of heap_vacuum_rel() so that related
variables appear together.
Previously, the specialized tuplesort routine inlined handling for
reverse-sort and NULLs-ordering but called the datum comparator via a
pointer in the SortSupport struct parameter. Testing has showed that we
can get a useful performance gain by specializing datum comparison for
the different representations of abbreviated keys -- signed and unsigned
64-bit integers and signed 32-bit integers. Almost all abbreviatable data
types will benefit -- the only exception for now is numeric, since the
datum comparison is more complex. The performance gain depends on data
type and input distribution, but often falls in the range of 10-20% faster.
Thomas Munro
Reviewed by Peter Geoghegan, review and performance testing by me
Discussion:
https://www.postgresql.org/message-id/CA%2BhUKGKKYttZZk-JMRQSVak%3DCXSJ5fiwtirFf%3Dn%3DPAbumvn1Ww%40mail.gmail.com
This makes the code more consistent with SpGiST, GiST and GIN, that
already use this style, and the idea is to make easier the introduction
of more sanity checks for each of these AM-specific macros. BRIN uses a
different set of macros to get a page's type and flags, so it has no
need for something similar.
Author: Matthias van de Meent
Discussion: https://postgr.es/m/CAEze2WjE3+tGO9Fs9+iZMU+z6mMZKo54W1Zt98WKqbEUHbHOBg@mail.gmail.com
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf6, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
They were macros previously, but recent callsite additions made Coverity
complain about one of the assertions being always true. This change
could have been made a long time ago, but the Coverity complain broke
the inertia.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/202203241021.uts52sczx3al@alvherre.pgsql
Invalidate abortedRecPtr and missingContrecPtr after a missing
continuation record is successfully skipped on a standby. This fixes a
PANIC caused when a recently promoted standby attempts to write an
OVERWRITE_RECORD with an LSN of the previously read aborted record.
Backpatch to 10 (all stable versions).
Author: Sami Imseih <simseih@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/44D259DE-7542-49C4-8A52-2AB01534DCA9@amazon.com
A security invoker view checks permissions for accessing its
underlying base relations using the privileges of the user of the
view, rather than the privileges of the view owner. Additionally, if
any of the base relations are tables with RLS enabled, the policies of
the user of the view are applied, rather than those of the view owner.
This allows views to be defined without giving away additional
privileges on the underlying base relations, and matches a similar
feature available in other database systems.
It also allows views to operate more naturally with RLS, without
affecting the assignments of policies to users.
Christoph Heiss, with some additional hacking by me. Reviewed by
Laurenz Albe and Wolfgang Walther.
Discussion: https://postgr.es/m/b66dd6d6-ad3e-c6f2-8b90-47be773da240%40cybertec.at
The old name was overly generic. An upcoming commit moves relation stats
handling into its own file, making pgstat_initstats() look even more out of
place.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Teach xlogreader.c to decode the WAL into a circular buffer. This will
support optimizations based on looking ahead, to follow in a later
commit.
* XLogReadRecord() works as before, decoding records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros and certain traditional members like xlogreader->ReadRecPtr.
* An alternative new interface XLogReadAhead()/XLogNextRecord() is
added that returns pointers to DecodedXLogRecord objects so that it's
now possible to look ahead in the WAL stream while replaying.
* In order to be able to use the new interface effectively while
streaming data, support is added for the page_read() callback to
respond to a new nonblocking mode with XLREAD_WOULDBLOCK instead of
waiting for more data to arrive.
No direct user of the new interface is included in this commit, though
XLogReadRecord() uses it internally. Existing code doesn't need to
change, except in a few places where it was accessing reader internals
directly and now needs to go through accessor macros.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Commands like ALTER TABLE SET TABLESPACE may leave files for the next
checkpoint to clean up. If such files are not removed by the time DROP
TABLESPACE is called, we request a checkpoint so that they are deleted.
However, there is presently a window before checkpoint start where new
unlink requests won't be scheduled until the following checkpoint. This
means that the checkpoint forced by DROP TABLESPACE might not remove the
files we expect it to remove, and the following ERROR will be emitted:
ERROR: tablespace "mytblspc" is not empty
To fix, add a call to AbsorbSyncRequests() just before advancing the
unlink cycle counter. This ensures that any unlink requests forwarded
prior to checkpoint start (i.e., when ckpt_started is incremented) will
be processed by the current checkpoint. Since AbsorbSyncRequests()
performs memory allocations, it cannot be called within a critical
section, so we also need to move SyncPreCheckpoint() to before
CreateCheckPoint()'s critical section.
This is an old bug, so back-patch to all supported versions.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220215235845.GA2665318%40nathanxps13
Previously, pg_basebackup from a cluster that contained an 'in-place'
tablespace, as introduced by commit 7170f215, would produce a harmless
warning on Unix and fail completely on Windows.
Reported-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220304.165449.1200020258723305904.horikyota.ntt%40gmail.com
Commit 872770fd6c taught VACUUM VERBOSE and autovacuum logging to
display the total number of pages scanned by VACUUM. This information
was also displayed as a percentage of rel_pages in parenthesis, which
makes it easy to spot trends over time and across tables.
The instrumentation displayed "0 scanned (0.00% of total)" for totally
empty tables. Tweak the instrumentation: have it show "0 scanned
(100.00% of total)" for empty tables instead. This approach is clearer
and more consistent.
VACUUM's rel_pages field indicates the size of the target heap rel just
after the table_relation_vacuum() operation began. There are specific
expectations around how rel_pages can be related to other nearby state.
In particular, the range of rel_pages must contain every tuple in the
relation whose tuple headers might contain an XID < OldestXmin.
Consistently refer to the field as rel_pages to make this clearer and
more discoverable.
This is follow-up work to commit 73f6ec3d from earlier today.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311031351.sbge5m2bpvy2ttxg@alap3.anarazel.de
Explain the relationship between vacuumlazy.c's vistest and OldestXmin
cutoffs. These closely related cutoffs are different in subtle but
important ways. Also document a closely related rule: we must establish
rel_pages _after_ OldestXmin to ensure that no XID < OldestXmin can be
missed by lazy_scan_heap().
It's easier to explain these issues by initializing everything together,
so consolidate initialization of vacrel state. Now almost every vacrel
field is initialized by heap_vacuum_rel(). The only remaining exception
is the dead_items array, which is still managed by lazy_scan_heap() due
to interactions with how we initialize parallel VACUUM.
Also move the process that updates pg_class entries for each index into
heap_vacuum_rel(), and adjust related assertions. All pg_class updates
now take place after lazy_scan_heap() returns, which seems clearer.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211211045710.ljtuu4gfloh754rs@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WznYsUxVT156rCQ+q=YD4S4=1M37hWvvHLz-H1pwSM8-Ew@mail.gmail.com
We called the argument totally_frozen in its function prototype as well
as in code comments, even though totally_frozen_p was used in the
function definition. Standardize on totally_frozen.
wal_compression gains a new value, "zstd", to allow the compression of
full-page images using the compression method of the same name.
Compression is done using the default level recommended by the library,
as of ZSTD_CLEVEL_DEFAULT = 3. Some benchmarking has shown that it
could make sense to use a level lower for the FPI compression, like 1 or
2, as the compression rate did not change much with a bit less CPU
consumed, but any tests done would only cover few scenarios so it is
hard to come to a clear conclusion. Anyway, there is no reason to not
use the default level instead, which is the level recommended by the
library so it should be fine for most cases.
zstd outclasses easily pglz, and is better than LZ4 where one wants to
have more compression at the cost of extra CPU but both are good enough
in their own scenarios, so the choice between one or the other of these
comes to a study of the workload patterns and the schema involved,
mainly.
This commit relies heavily on 4035cd5, that reshaped the code creating
and restoring full-page writes to be aware of the compression type,
making this integration straight-forward.
This patch borrows some early work from Andrey Borodin, though the patch
got a complete rewrite.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220222231948.GJ9008@telsasoft.com
Per project policy, all system and library headers need to be declared
in the backend code after "postgres.h" and before the internal headers,
but 4035cd5 broke this policy when adding support for LZ4 in
wal_compression.
Noticed while reviewing the patch to add support for zstd in this area.
This only impacts HEAD, so there is no need for a back-patch.
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
This function has been incorrectly marked as a set-returning function
with prorows (estimated number of rows) set to 1 since its creation in
7117685, that introduced non-exclusive backups. There is no need for
that as the function is designed to return only one tuple.
This commit fixes the catalog definition of pg_stop_backup_v2() so as it
is not marked as proretset anymore, with prorows set to 0. This
simplifies its internals by removing one tuplestore (used for one single
record anyway) and by removing all the checks related to a set-returning
function.
Issue found during my quest to simplify some of the logic used in
in-core system functions.
Bump catalog version.
Reviewed-by: Aleksander Alekseev, Kyotaro Horiguchi
Discussion: https://postgr.es/m/Yh8guT78f1Ercfzw@paquier.xyz
This is pretty queasy-making on general principles, and the more so
once you notice that CommitTransactionCommand() is actually stomping
on the values saved by _SPI_commit(). It's okay as long as the
active values didn't change during HoldPinnedPortals(); but that's
a larger assumption than I think we want to make, especially since
the fix is so simple.
Discussion: https://postgr.es/m/1533956.1645731245@sss.pgh.pa.us
Commit 49c9d9fc unified VACUUM VERBOSE and autovacuum logging. It
neglected to remove an old vacrel field that was only used by the old
VACUUM VERBOSE, so remove it now.
The previous num_tuples approach doesn't seem to have any real advantage
over the approach VACUUM VERBOSE takes now (also the approach used by
the autovacuum logging code), which is to show new_rel_tuples.
new_rel_tuples is the possibly-estimated total number of tuples left in
the table, whereas num_tuples meant the number of tuples encountered
during the VACUUM operation, after pruning, without regard for tuples
from pages skipped via the visibility map.
In passing, reorder a related vacrel field for consistency.
The buffer argument hasn't been used since the function was first added
by commit bbb6e559c4. The sibling heap_prepare_freeze_tuple function
doesn't have such an argument either. Remove it.
If a checkpoint happens during sorted GiST index build, and the system
crashes after the checkpoint and after the index build has finished,
the data written to the index before the checkpoint started could be
lost. The checkpoint won't fsync it, and it won't be replayed at crash
recovery either. Fix by calling smgrimmedsync() after the index build,
just like in B-tree index build.
Backpatch to v14 where the sorted GiST index build was introduced.
Reported-by: Melanie Plageman
Discussion: https://www.postgresql.org/message-id/CAAKRu_ZJJynimxKj5xYBSziL62-iEtPE+fx-B=JzR=jUtP92mw@mail.gmail.com
Commit <FIXME> fixed the bug that RemoveTempRelationsCallback() did not
push/register a snapshot. That only went unnoticed because often a valid
catalog snapshot exists and is returned by GetOldestSnapshot(). But due to
invalidation processing that is not reliable.
Thus assert in init_toast_snapshot() that there is a registered or active
snapshot, using the new HaveRegisteredOrActiveSnapshot().
Author: Andres Freund
Discussion: https://postgr.es/m/20220219180002.6tubjq7iw7m52bgd@alap3.anarazel.de
This routine is a no-op since dd04e95 from 2003, with a macro kept
around for compatibility purposes. This has led to the same code
patterns being copy-pasted around for no effect, sometimes in confusing
ways like in pg_logical_slot_get_changes_guts() from logical.c where the
code was actually incorrect.
This issue has been discussed on two different threads recently, so
rather than living with this legacy, remove any uses of this routine in
the C code to simplify things. The compatibility macro is kept to avoid
breaking any out-of-core modules that depend on it.
Reported-by: Tatsuhito Kasahara, Justin Pryzby
Author: Tatsuhito Kasahara
Discussion: https://postgr.es/m/20211217200419.GQ17618@telsasoft.com
Discussion: https://postgr.es/m/CAP0=ZVJeeYfAeRfmzqAF2Lumdiv4S4FewyBnZd4DPTrsSQKJKw@mail.gmail.com
In commit 70e81861fa to split xlog.c, I moved the startup code that
updates the state in the control file and prints out the "database
system was not properly shut down" message to the log, but I
accidentally removed the "if (InRecovery)" check around it. As a
result, that message was printed even if the system was cleanly shut
down, also during 'initdb'.
Discussion: https://www.postgresql.org/message-id/3357075.1645031062@sss.pgh.pa.us
FinishWalRecovery() copied the valid part of the last WAL block into a
palloc'd buffer, and the code in StartupXLOG() copied it to the WAL
buffer. But the memcpy in StartupXLOG() copied a full 8kB block, not
just the valid part, i.e. it copied from beyond the end of the buffer.
The invalid part was cleared immediately afterwards, so as long as the
memory was allocated and didn't segfault, it didn't do any harm, but
it can definitely segfault.
Discussion: https://www.postgresql.org/message-id/efc12e32-5af2-3485-5b1d-5af9f707491a@iki.fi
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
This is in preparation for the next commit, which will split off
recovery-related code from xlog.c into a new source file. This is the
order that things will happen with the next commit, and the point of
this commit is to make these ordering changes more explicit, while the
next commit mechanically moves the source code to the new file. To aid
review, I added "BEGIN/END function" comments to mark which blocks of
code are moved to which functions in the next commit. They will be gone
in the next commit.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
To tidy up after some recent refactorings in xlog.c. These would be
fixed by the pgindent run we do at the end of the development cycle,
but I want to clean these up now as I'm about to do some more big
refactorings on xlog.c.
There is a very good (though non-obvious) reason to avoid relation
truncation during a VACUUM that has triggered the failsafe mechanism,
which was missed before now. Update related comments, so this isn't
forgotten.
Reported-By: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/CAFBsxsFiMPxQ-dHZ8tOgktn=+ffeJT3+GinZ4zdOGbmAnCYadA@mail.gmail.com
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
As of 1eb6d65, the origin data is optionally stored in a 2PC file
header, with the data filled in EndPrepare() even in the default case
where there is no origin data to add. This was inconsistent with all
the other fields of TwoPhaseFileHeader which are initialized in
StartPrepare(), so move the initialization of origin_lsn and
origin_timestamp there instead. The effect of missing the
initialization at this early stage is only cosmetic based on the current
logic of the code, but could have led to issues in the long-term, and it
is more consistent done this way.
Reported-by: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAooECJ+gU_RZB-yhioPOV94R4ucoHAf68PiJhLpgpVpBw@mail.gmail.com
Depending on compiler version and optimization level, we might
get a complaint that lazy_scan_heap's "freespace" is used
uninitialized.
Compilers not aware that ereport(ERROR) doesn't return complained
about bbsink_lz4_new().
Assigning "-1" to a uint64 value has unportable results; fortunately,
the value of xlogreadsegno is unimportant when xlogreadfd is -1.
(It looks to me like there is no need for xlogreadsegno to be static
in the first place, but I didn't venture to change that.)
Report on scanned pages within VACUUM VERBOSE and autovacuum logging.
These are pages that were physically examined during the VACUUM
operation. Note that this can include a small number of pages that were
marked all-visible in the visibility map by some earlier VACUUM
operation. VACUUM won't skip all-visible pages that aren't part of a
range of all-visible pages that's at least 32 blocks in length (partly
to avoid missing out on opportunities to advance relfrozenxid during
non-aggressive VACUUMs).
Commit 44fa8488 simplified the definition of scanned pages. It became
the complement of the pages (of those pages from rel_pages) that were
skipped using the visibility map. And so scanned pages precisely
indicates how effective the visibility map was at saving work. (Before
now we displayed the number of pages skipped via the visibility map when
happened to be frozen pages, but not when they were merely all-visible,
which was less useful to users.)
Rename the user-visible OldestXmin output field to "removal cutoff", and
show some supplementary information: how far behind the cutoff is
(number of XIDs behind) by the time the VACUUM operation finished. This
will help users to figure out what's _not_ working in extreme cases
where VACUUM is fundamentally unable to remove dead tuples or freeze
older tuples (e.g., due to a leaked replication slot). Also report when
relfrozenxid is advanced by VACUUM in output that immediately follows
"removal cutoff". This structure is intended to highlight the
relationship between the new relfrozenxid value for the table, and the
VACUUM operation's removal cutoff.
Finally, add instrumentation of "missed dead tuples", and the number of
pages that had at least one such tuple. These are fully DEAD (not just
RECENTLY_DEAD) tuples with storage that could not be pruned due to
failure to acquire a cleanup lock on a heap page. This is a replacement
for the "skipped due to pin" instrumentation removed by commit 44fa8488.
It shows more details than before for pages where failing to get a
cleanup lock actually resulted in VACUUM missing out on useful work, but
usually shows nothing at all instead (the mere fact that we couldn't get
a cleanup lock is usually of no consequence whatsoever now).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wznp=c=Opj8Z7RMR3G=ec3_JfGYMN_YvmCEjoPCHzWbx0g@mail.gmail.com
Redefine a scanned page as any heap page that actually gets pinned by
VACUUM's first pass over the heap, regardless of whether or not the page
was cleanup locked. Although it's fundamentally impossible to prune a
heap page without a cleanup lock (since we cannot safely defragment the
page), we can do just about everything else. The only notable further
exception is freezing tuples, though even that is arguably a consequence
of not being able to prune (not a separate issue).
VACUUM now does as much of the same processing as possible for pages
that could not be cleanup locked. Any failure to do specific required
processing is treated as a special case exception, which will be rare in
practice. We now collect any preexisting LP_DEAD items (left behind by
earlier opportunistic pruning) in the dead_items array for these heap
pages, and count their tuples in the usual way. Steps used to decide if
we'll attempt relation truncation are performed in the usual way for
no-cleanup-lock scanned pages, too.
Although eliminating these special cases is intrinsically useful, it's
even more useful as an enabler of further simplifications. The only
essential difference between aggressive and non-aggressive is that only
aggressive is _guaranteed_ to be able to advance relfrozenxid up to
FreezeLimit. Advancing relfrozenxid is always useful, but before now
non-aggressive VACUUMs threw away the opportunity to do so whenever a
cleanup lock could not be acquired on any page, no matter what the
details were. This was very pessimistic.
It isn't actually necessary to "behave aggressively" to maintain the
ability to advance relfrozenxid when a cleanup lock isn't immediately
available (most of the time). The non-aggressive case will now make
sure that it isn't safe to advance relfrozenxid (without waiting) using
only a share lock. It will usually notice that there are no tuples that
need to be frozen anyway, just like in the aggressive case -- and so it
no longer wastes an opportunity to advance relfrozenxid over nothing.
(The non-aggressive case still won't wait for a cleanup lock when there
really are tuples on the page that need to be frozen, since that really
would amount to "behaving aggressively".)
VACUUM currently has a tendency to set heap pages to all-visible in the
visibility map before it freezes all of the tuples on the page. Only a
subsequent aggressive VACUUM will visit these pages to freeze their
tuples, usually only when the tuple XIDs are much older than the
vacuum_freeze_min_age GUC (FreezeLimit cutoff) is supposed to allow.
And so non-aggressive VACUUMs are still far less likely to be able to
advance relfrozenxid in practice, even with the enhancements from this
commit. This remaining issue will be addressed by future work that
overhauls the criteria for freezing tuples. Once that's in place,
almost every VACUUM operation will be able to advance relfrozenxid in
practice.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wznp=c=Opj8Z7RMR3G=ec3_JfGYMN_YvmCEjoPCHzWbx0g@mail.gmail.com
Previously, it was really easy to write code that accessed MaxBackends
before we'd actually initialized it, especially when coding up an
extension. To make this less error-prune, introduce a new function
GetMaxBackends() which should be used to obtain the correct value.
This will ERROR if called too early. Demote the global variable to
a file-level static, so that nobody can peak at it directly.
Nathan Bossart. Idea by Andres Freund. Review by Greg Sabino Mullane,
by Michael Paquier (who had doubts about the approach), and by me.
Discussion: http://postgr.es/m/20210802224204.bckcikl45uezv5e4@alap3.anarazel.de
The GiST sorted build currently chooses split points according to the only page
space utilization. That may lead to higher non-leaf keys overlap and, in turn,
slower search query answers.
This commit makes the sorted build use the opclass's picksplit method. Once
four pages at the level are accumulated, the picksplit method is applied until
each split partition fits the page. Some of our split algorithms could show
significant performance degradation while processing 4-times more data at once.
But those opclasses haven't received the sorted build support and shouldn't
receive it before their split algorithms are improved.
Discussion: https://postgr.es/m/CAHqSB9jqtS94e9%3D0vxqQX5dxQA89N95UKyz-%3DA7Y%2B_YJt%2BVW5A%40mail.gmail.com
Author: Aliaksandr Kalenik, Sergei Shoulbakov, Andrey Borodin
Reviewed-by: Björn Harrtell, Darafei Praliaskouski, Andres Freund
Reviewed-by: Alexander Korotkov
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
xlog.h is directly and indirectly #included in a lot of places. With
this change, xloginsert.h is no longer unnecessarily included in the
large number of them that don't need it.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACVe-W+WM5P44N7eG9C2_FmaeM8Dq5aCnD3fHt0Ba=WR6w@mail.gmail.com
WAL replay would cause a hard crash if the timeline expected by a
XLOG_END_OF_RECOVERY, a XLOG_CHECKPOINT_ONLINE, or a
XLOG_CHECKPOINT_SHUTDOWN record is not the same as the timeline being
replayed, using the same error message for all three of them. This
commit changes those error messages to use different wordings, adapted
to each record type, which is useful when it comes to the debugging of
an issue in this area.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Robert Haas
Discussion: https://postgr.es/m/CAAJ_b97i1ZerYC_xW6o_AiDSW5n+sGi8k91Yc8KS8bKWKxjqwQ@mail.gmail.com
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
While individual logical rewrite files were synced to disk, the directory was
not. On some filesystems that could lead to loosing directory entries after a
crash.
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Author: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/867F2E29-2782-4869-970E-B984C6D35A8F@amazon.com
Backpatch: 10-
The logic in charge of writing commit timestamps (enabled with
track_commit_timestamp) for subtransactions had a one-bug bug,
where it would be possible that commit timestamps go missing for the
last subtransaction committed.
While on it, simplify a bit the iteration logic in the loop writing the
commit timestamps, as per suggestions from Kyotaro Horiguchi and Tom
Lane, so as some variable initializations are not part of the loop
itself.
Issue introduced in 73c986a.
Analyzed-by: Alex Kingsborough
Author: Alex Kingsborough, Kyotaro Horiguchi
Discussion: https://postgr.es/m/73A66172-4050-4F2A-B7F1-13508EDA2144@amazon.com
Backpatch-through: 10
Previously, callers of pg_newlocale_from_collation() did not call it
if the collation was DEFAULT_COLLATION_OID and instead proceeded with
a pg_locale_t of 0. Instead, now we call it anyway and have it return
0 if the default collation was passed. It already did this, so we
just have to adjust the callers. This simplifies all the call sites
and also makes future enhancements easier.
After discussion and testing, the previous comment in pg_locale.c
about avoiding this for performance reasons may have been mistaken
since it was testing a very different patch version way back when.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/ed3baa81-7fac-7788-cc12-41e3f7917e34@enterprisedb.com
BufferGetBlockNumber() is not that cheap and obviously cannot change during
one heap_prune_page(), so only call it once. We might be able to do better and
pass the block number from the caller, but that'd be a larger change...
Discussion: https://postgr.es/m/20211211045710.ljtuu4gfloh754rs@alap3.anarazel.de
The log_autovacuum_min_duration instrumentation used its own dedicated
code for logging, which was not reused by VACUUM VERBOSE. This was
highly duplicative, and sometimes led to each code path using slightly
different accounting for essentially the same information.
Clean things up by making VACUUM VERBOSE reuse the same instrumentation
code. This code restructuring changes the structure of the VACUUM
VERBOSE output itself, but that seems like an overall improvement. The
most noticeable change in VACUUM VERBOSE output is that it no longer
outputs a distinct message per index per round of index vacuuming. Most
of the same information (about each index) is now shown in its new
per-operation summary message. This is far more legible.
A few details are no longer displayed by VACUUM VERBOSE, but that's no
real loss in practice, especially in the common case where we don't need
multiple index scans/rounds of vacuuming. This super fine-grained
information is still available via DEBUG2 messages, which might still be
useful in debugging scenarios.
VACUUM VERBOSE now shows new instrumentation, which is typically very
useful: all of the log_autovacuum_min_duration instrumentation that it
missed out on before now. This includes information about WAL overhead,
buffers hit/missed/dirtied information, and I/O timing information.
VACUUM VERBOSE still retains a few INFO messages of its own. This is
limited to output concerning the progress of heap rel truncation, as
well as some basic information about parallel workers. These details
are still potentially quite useful. They aren't a good fit for the log
output, which must summarize the whole operation.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmW4Me7_qR4X4ka7pxP-jGmn7=Npma_-Z-9Y1eD0MQRLw@mail.gmail.com
Corruption of redirect item pointers often only becomes visible well after
being corrupted, as e.g. bug #17255 shows: In the original reproducer,
gigabyte of WAL were between the source of the corruption and the corruption
becoming visible.
To make it easier to find / prevent such bugs, verify whether redirect
pointers are sensible at the end of heap_page_prune_execute(). 5cd7eb1f1c
introduced related assertions while modifying the page, but they can't easily
detect marking the target of an existing redirect as unused. Sometimes the
corruption will be detected later, but that's harder to diagnose.
Author: Andres Freund <andres@andres@anarazel.de>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb@alap3.anarazel.de
Since dc7420c2c9 the horizon used for pruning is determined "lazily". A more
accurate horizon is built on-demand, rather than in GetSnapshotData(). If a
horizon computation is triggered between two HeapTupleSatisfiesVacuum() calls
for the same tuple, the result can change from RECENTLY_DEAD to DEAD.
heap_page_prune() can process the same tid multiple times (once following an
update chain, once "directly"). When the result of HeapTupleSatisfiesVacuum()
of a tuple changes from RECENTLY_DEAD during the first access, to DEAD in the
second, the "tuple is DEAD and doesn't chain to anything else" path in
heap_prune_chain() can end up marking the target of a LP_REDIRECT ItemId
unused.
Initially not easily visible,
Once the target of a LP_REDIRECT ItemId is marked unused, a new tuple version
can reuse it. At that point the corruption may become visible, as index
entries pointing to the "original" redirect item, now point to a unrelated
tuple.
To fix, compute HTSV for all tuples on a page only once. This fixes the entire
class of problems of HTSV changing inside heap_page_prune(). However,
visibility changes can obviously still occur between HTSV checks inside
heap_page_prune() and outside (e.g. in lazy_scan_prune()).
The computation of HTSV is now done in bulk, in heap_page_prune(), rather than
on-demand in heap_prune_chain(). Besides being a bit simpler, it also is
faster: Memory accesses can happen sequentially, rather than in the order of
HOT chains.
There are other causes of HeapTupleSatisfiesVacuum() results changing between
two visibility checks for the same tuple, even before dc7420c2c9. E.g.
HEAPTUPLE_INSERT_IN_PROGRESS can change to HEAPTUPLE_DEAD when a transaction
aborts between the two checks. None of the these other visibility status
changes are known to cause corruption, but heap_page_prune()'s approach makes
it hard to be confident.
A patch implementing a more fundamental redesign of heap_page_prune(), which
fixes this bug and simplifies pruning substantially, has been proposed by
Peter Geoghegan in
https://postgr.es/m/CAH2-WzmNk6V6tqzuuabxoxM8HJRaWU6h12toaS-bqYcLiht16A@mail.gmail.com
However, that redesign is larger change than desirable for backpatching. As
the new design still benefits from the batched visibility determination
introduced in this commit, it makes sense to commit this narrower fix to 14
and master, and then commit Peter's improvement in master.
The precise sequence required to trigger the bug is complicated and hard to do
exercise in an isolation test (until we have wait points). Due to that the
isolation test initially posted at
https://postgr.es/m/20211119003623.d3jusiytzjqwb62p%40alap3.anarazel.de
and updated in
https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb%40alap3.anarazel.de
isn't committable.
A followup commit will introduce additional assertions, to detect problems
like this more easily.
Bug: #17255
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Debugged-By: Andres Freund <andres@anarazel.de>
Debugged-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@andres@anarazel.de>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/20211122175914.ayk6gg6nvdwuhrzb@alap3.anarazel.de
Backpatch: 14-, the oldest branch containing dc7420c2c9
Under concurrency, it is possible for two sessions to be merrily locking
and releasing a tuple and marking it again as HEAP_XMAX_INVALID all the
while a third session attempts to lock it, miserably fails at it, and
then contemplates life, the universe and everything only to eventually
fail an assertion that said bit is not set. Before SKIP LOCKED that was
indeed a reasonable expectation, but alas! commit df630b0dd5 falsified
it.
This bug is as old as time itself, and even older, if you think time
begins with the oldest supported branch. Therefore, backpatch to all
supported branches.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Discussion: https://postgr.es/m/CANbhV-FeEwMnN8yuMyss7if1ZKjOKfjcgqB26n8pqu1e=q0ebg@mail.gmail.com
This commit moves parallel vacuum related code to a new file
commands/vacuumparallel.c so that any table AM supporting indexes can
utilize parallel vacuum in order to call index AM callbacks (ambulkdelete
and amvacuumcleanup) with parallel workers.
Another reason for this refactoring is that the parallel vacuum isn't
specific to heap so it doesn't make sense to keep this code in
heap/vacuumlazy.c.
Author: Masahiko Sawada, based on suggestion from Andres Freund
Reviewed-by: Hou Zhijie, Amit Kapila, Haiying Tang
Discussion: https://www.postgresql.org/message-id/20211030212101.ae3qcouatwmy7tbr%40alap3.anarazel.de
Instead of referring to target backends by pid, use pgprocno. This
means that we don't have to scan the ProcArray and we can drop some
special case code for dealing with the startup process.
Discussion: https://postgr.es/m/CA%2BhUKGLYRyDaneEwz5Uya_OgFLMx5BgJfkQSD%3Dq9HmwsfRRb-w%40mail.gmail.com
Reviewed-by: Soumyadeep Chakraborty <soumyadeep2007@gmail.com>
Reviewed-by: Ashwin Agrawal <ashwinstar@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Previously, in parallel vacuum, we allocated shmem area of
IndexBulkDeleteResult only for indexes where parallel index vacuuming is
safe and had null-bitmap in shmem area to access them. This logic was too
complicated with a small benefit of saving only a few bits per indexes.
In this commit, we allocate a dedicated shmem area for the array of
LVParallelIndStats that includes a parallel-safety flag, the index vacuum
status, and IndexBulkdeleteResult. There is one array element for every
index, even those indexes where parallel index vacuuming is unsafe or not
worthwhile. This commit makes the code clear by removing all
bitmap-related code.
Also, add the check each index vacuum status after parallel index vacuum
to make sure that all indexes have been processed.
Finally, rename parallel vacuum functions to parallel_vacuum_* for
consistency.
Author: Masahiko Sawada, based on suggestions by Andres Freund
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://www.postgresql.org/message-id/20211030212101.ae3qcouatwmy7tbr%40alap3.anarazel.de
When using replication origins, pg_replication_origin_xact_setup() is an
optional choice to be able to set a LSN and a timestamp to mark the
origin, which would be additionally added to WAL for transaction commits
or aborts (including 2PC transactions). An assertion in the code path
of PREPARE TRANSACTION assumed that this data should always be set, so
it would trigger when using replication origins without setting up an
origin LSN. Some tests are added to cover more this kind of scenario.
Oversight in commit 1eb6d65.
Per discussion with Amit Kapila and Masahiko Sawada.
Discussion: https://postgr.es/m/YbbBfNSvMm5nIINV@paquier.xyz
Backpatch-through: 11
It's not great that RecoveryInProgress() calls InitXLOGAccess(),
because a status inquiry function typically shouldn't have the side
effect of performing initializations. We could fix that by calling
InitXLOGAccess() from some other place, but instead, let's remove it
altogether.
One thing InitXLogAccess() did is initialize wal_segment_size, but it
doesn't need to do that. In the postmaster, PostmasterMain() calls
LocalProcessControlFile(), and all child processes will inherit that
value -- except in EXEC_BACKEND bulds, but then each backend runs
SubPostmasterMain() which also calls LocalProcessControlFile().
The other thing InitXLOGAccess() did is update RedoRecPtr and
doPageWrites, but that's not critical, because all code that uses
them will just retry if it turns out that they've changed. The
only difference is that most code will now see an initial value that
is definitely invalid instead of one that might have just been way
out of date, but that will only happen once per backend lifetime,
so it shouldn't be a big deal.
Patch by me, reviewed by Nathan Bossart, Michael Paquier, Andres
Freund, Heikki Linnakangas, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
The idea here is that when a performance problem is known to have
occurred at a certain point in time, it's a good thing if there is
some information available from the logs to help figure out what
might have happened around that time.
This change attracted an above-average amount of dissent, because
it means that a server with default settings will produce some amount
of log output even if nothing has gone wrong. However, by my count,
the mailing list discussion had about twice as many people in favor
of the change as opposed. The reasons for believing that the extra
log output is not an issue in practice are: (1) the rate at which
messages can be generated by this setting is bounded to one every
few minutes on a properly-configured system and (2) production
systems tend to have a lot more junk in the log from that due to
failed connection attempts, ERROR messages generated by application
activity, and the like.
Bharath Rupireddy, reviewed by Fujii Masao and by me. Many other
people commented on the thread, but as far as I can see that was
discussion of the merits of the change rather than review of the
patch.
Discussion: https://postgr.es/m/CALj2ACX-rW_OeDcp4gqrFUAkf1f50Fnh138dmkd0JkvCNQRKGA@mail.gmail.com
This commit improves the description of some WAL records for the
Transaction RMGR:
- Track remote_apply for a transaction commit. This GUC is
user-settable, so this information can be useful for debugging.
- Add replication origin information for PREPARE TRANSACTION, with the
origin ID, LSN and timestamp
- Same as above, for ROLLBACK PREPARED.
This impacts the format of pg_waldump or anything using these
description routines, so no backpatch is done.
Author: Masahiko Sawada, Michael Paquier
Discussion: https://postgr.es/m/CAD21AoD2dJfgsdxk4_KciAZMZQoUiCvmV9sDpp8ZuKLtKCNXaA@mail.gmail.com
The term "super-exclusive lock" is a synonym for "buffer cleanup lock"
that first appeared in nbtree many years ago. Standardize things by
consistently using the term cleanup lock. This finishes work started by
commit 276db875.
There is no good reason to have two terms. But there is a good reason
to only have one: to avoid confusion around why VACUUM acquires a full
cleanup lock (not just an ordinary exclusive lock) in index AMs, during
ambulkdelete calls. This has nothing to do with protecting the physical
index data structure itself. It is needed to implement a locking
protocol that ensures that TIDs pointing to the heap/table structure
cannot get marked for recycling by VACUUM before it is safe (which is
somewhat similar to how VACUUM uses cleanup locks during its first heap
pass). Note that it isn't strictly necessary for index AMs to implement
this locking protocol -- several index AMs use an MVCC snapshot as their
sole interlock to prevent unsafe TID recycling.
In passing, update the nbtree README. Cleanly separate discussion of
the aforementioned index vacuuming locking protocol from discussion of
the "drop leaf page pin" optimization added by commit 2ed5b87f. We now
structure discussion of the latter by describing how individual index
scans may safely opt out of applying the standard locking protocol (and
so can avoid blocking progress by VACUUM). Also document why the
optimization is not safe to apply during nbtree index-only scans.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzngHgQa92tz6NQihf4nxJwRzCV36yMJO_i8dS+2mgEVKw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkHPgsBBvGWjz=8PjNhDefy7XRkDKiT5NxMs-n5ZCf2dA@mail.gmail.com
REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
Like 5364b357fb did for pg_commit, change the formula used to
determine number of pg_commit_ts buffers, which helps performance with
larger servers.
Discussion: https://postgr.es/m/20210115220744.GA24457@alvherre.pgsql
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Commit 8523492d simplified what it meant for an item to be considered
"dead" to VACUUM: TIDs collected in memory (in preparation for index
vacuuming) must always come from LP_DEAD stub line pointers in heap
pages, found following pruning. This formalized the idea that index
vacuuming (and heap vacuuming) are optional processes. Unlike pruning,
they can be delayed indefinitely, without any risk of that violating
fundamental invariants. For example, leaving LP_DEAD items behind
clearly won't add to the risk of transaction ID wraparound. You can't
have transaction ID wraparound without transaction IDs. Renaming
anything that references DEAD tuples (tuples with storage) reinforces
all this.
Code outside vacuumlazy.c continues to fudge the distinction between
dead/deleted tuples, and LP_DEAD items. This is necessary because
autovacuum scheduling is still mostly driven by "dead items/tuples"
statistics. In the future we may find it useful to replace this model
with something more sophisticated, as a step towards teaching autovacuum
to perform more frequent vacuuming that targeting individual indexes
that happen to be more prone to becoming bloated through version churn.
In passing, simplify some function signatures that deal with VACUUM's
dead_items array.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzktGBg4si6DEdmq3q6SoXSDqNi6MtmB8CmmTmvhsxDTLA@mail.gmail.com
This commit moves the timestamp computation of the control file within
the routine of src/common/ in charge of updating the backend's control
file, which is shared by multiple frontend tools (pg_rewind,
pg_checksums and pg_resetwal) and the backend itself.
This change has as direct effect to update the control file's timestamp
when writing the control file in pg_rewind and pg_checksums, something
that is helpful to keep track of control file updates for those
operations, something also tracked by the backend at startup within its
logs. This part is arguably a bug, as ControlFileData->time should be
updated each time a new version of the control file is written, but this
is a behavior change so no backpatch is done.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/CAAJ_b97nd_ghRpyFV9Djf9RLXkoTbOUqnocq11WGq9TisX09Fw@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
The term "super-exclusive lock" is an acceptable synonym of "cleanup
lock". Even still, switching from one term to the other in the same
file is confusing. Standardize on "cleanup lock" within vacuumlazy.c.
Per a complaint from Andres Freund.
Update vacuumlazy.c file header comments (as well as comments above the
lazy_scan_heap function) that were largely written before the
introduction of the HOT optimization, when lazy_scan_heap did far less,
and didn't actually prune during its initial heap pass.
Since lazy_scan_heap now outsources far more work to lower level
functions, it makes sense to introduce the function by talking about the
high level invariant that dictates the order in which each phase takes
place. Also deemphasize the case where we run out of memory for TIDs,
since delaying that discussion makes it easier to talk about issues of
central importance.
Finally, remove discussion of parallel VACUUM from header comments.
These don't add much, and are in the wrong place.
Commit 2fd8685e7f simplified the checking of modified attributes that
takes place within heap_update(). This included a micro-optimization
affecting pages marked PD_PAGE_FULL: don't even try to use HOT to save a
few cycles on determining HOT safety. The assumption was that it won't
work out this time around, since it can't have worked out last time
around.
Remove the micro-optimization. It could only ever save cycles that are
consumed by the vast majority of heap_update() calls, which hardly seems
worth the added complexity. It also seems quite possible that there are
workloads that will do worse over time by repeated application of the
micro-optimization, despite saving some cycles on average, in the short
term.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAH2-WznU1L3+DMPr1F7o2eJBT7=3bAJoY6ZkWABAxNt+-afyTA@mail.gmail.com
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us
Various places wanted to point out that tuple descriptors don't
contain the variable-length fields of pg_attribute. This started when
attacl was added, but more fields have been added since, and these
comments haven't been kept up to date consistently. Reword so that
the purpose is clearer and we don't have to keep updating them.
In most places, the variables necessarily store the same value as the
eponymous members of the XLogReaderState that we use during WAL
replay, because ReadRecord() assigns the values from the structure
members to the global variables just after XLogReadRecord() returns.
However, XLogBeginRead() adjusts the structure members but not the
global variables, so after XLogBeginRead() and before the completion
of XLogReadRecord() the values can differ. Otherwise, they must be
identical. According to my analysis, the only place where either
variable is referenced at a point where it might not have the same
value as the structure member is the refrence to EndRecPtr within
XLogPageRead.
Therefore, at every other place where we are using the global
variable, we can just switch to using the structure member instead,
and remove the global variable. However, we can, and in fact should,
do this in XLogPageRead() as well, because at that point in the code,
the global variable will actually store the start of the record we
want to read - either because it's where the last WAL record ended, or
because the read position has been changed using XLogBeginRead since
the last record was read. The structure member, on the other hand,
will already have been updated to point to the end of the record we
just read. Elsewhere, the latter is what we use as an argument to
emode_for_corrupt_record(), so we should do the same here.
This part of the patch is perhaps a bug fix, but I don't think it has
any important consequences, so no back-patch. The point here is just
to continue to whittle down the entirely excessive use of global
variables in xlog.c.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
rescanLatestTimeLine() contains a guard against switching to
a timeline that forked off from the current one prior to the
current recovery point, but that guard does not work if the
timeline switch occurs before the first WAL recod (which must
be the checkpoint record) is read. Without this patch, an
improper timeline switch is therefore possible in such cases.
This happens because rescanLatestTimeLine() relies on the global
variable EndRecPtr to understand the current position of WAL
replay. However, EndRecPtr at this point in the code contains
the endpoint of the last-replayed record, not the startpoint or
endpoint of the record being replayed now. Thus, before any
records have been replayed, it's zero, which causes the sanity
check to always pass.
To fix, pass down the correct timeline explicitly. The
EndRecPtr value we want is the one from the xlogreader, which
will be the starting position of the record we're about to
try to read, rather than the global variable, which is the
ending position of the last record we successfully read.
They're usually the same, but not in the corner case described
here.
No back-patch, because in v14 and earlier branhes, we were using
the wrong TLI here as well as the wrong LSN. In master, that was
fixed by commit 4a92a1c3d1, but
that and it's prerequisite patches are too invasive to
back-patch for such a minor issue.
Patch by me, reviewed by Amul Sul.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
A couple of spots can benefit from an added errdetail(), which matches
what we were already doing in other places; and those that cannot
withstand errdetail() can get a more descriptive primary message.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/CALj2ACV+cX1eM03GfcA=ZMLXh5fSn1X1auJLz3yuS1duPSb9QA@mail.gmail.com
This doesn't belong next to very high level discussion of the tasks that
lazy_scan_heap performs. There is already a similar, longer comment
block at the top of vacuumlazy.c that mentions lazy_scan_heap directly.
Commit ac9099fc1 rearranged the logic in spgGetCache() that determines
the index's attType (nominal input data type) and leafType (actual
type stored in leaf index tuples). Turns out this broke things for
the case where (a) the actual input data type is different from the
nominal type, (b) the opclass's config function leaves leafType
defaulted, and (c) the opclass has no "compress" function. (b) caused
us to assign the actual input data type as leafType, and then since
that's not attType, we complained that a "compress" function is
required. For non-polymorphic opclasses, condition (a) arises in
binary-compatible cases, such as using SP-GiST text_ops for a varchar
column, or using any opclass on a domain over its nominal input type.
To fix, use attType for leafType when the index's declared column type
is different from but binary-compatible with attType. Do this only in
the defaulted-leafType case, to avoid overriding any explicit
selection made by the opclass.
Per bug #17294 from Ilya Anfimov. Back-patch to v14.
Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
At present, there is an undocumented coding rule that you must call
RecoveryInProgress(), or do something else that results in a call
to InitXLogInsert(), before trying to write WAL. Otherwise, the
WAL construction buffers won't be initialized, resulting in
failures.
Since it's not good to rely on a status inquiry function like
RecoveryInProgress() having the side effect of initializing
critical data structures, instead do the initialization eariler,
when the backend first starts up.
Patch by me. Reviewed by Nathan Bossart and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
Add a comment explaining why the pgstats accounting used during
opportunistic heap pruning operations (to maintain the current number of
dead tuples in the relation) needs to compensate by subtracting away the
number of new LP_DEAD items. This is needed so it can avoid completely
forgetting about tuples that become LP_DEAD items during pruning -- they
should still count.
It seems more natural to discuss this issue at the only relevant call
site (opportunistic pruning), since the same issue does not apply to the
only other caller (the VACUUM call site). Move everything there too.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzm7f+A6ej650gi_ifTgbhsadVW5cujAL3punpupHff5Yg@mail.gmail.com
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
It is up to the heap_page_prune() caller to decide what to do about
updating the FSM for a page following pruning. Update old comments that
address what we might want to do as if it was the responsibility of
heap_page_prune() itself. heap_page_prune() doesn't have enough
high-level context to make a sensible choice.
Presently, the archive_status directory was scanned for each file to
archive. When there are many status files, say because archive_command
has been failing for a long time, these directory scans can get very
slow. With this change, the archiver remembers several files to archive
during each directory scan, speeding things up.
To ensure timeline history files are archived as quickly as possible,
XLogArchiveNotify() forces the archiver to do a new directory scan as
soon as the .ready file for one is created.
Nathan Bossart, per a long discussion involving many people. It is
not clear to me exactly who out of all those people reviewed this
particular patch.
Discussion: http://postgr.es/m/CA+TgmobhAbs2yabTuTRkJTq_kkC80-+jw=pfpypdOJ7+gAbQbw@mail.gmail.com
Discussion: http://postgr.es/m/620F3CE1-0255-4D66-9D87-0EADE866985A@amazon.com
In XLogCtlData, rename the structure member ThisTimeLineID to
InsertTimeLineID and update the comments to make clear that it's only
expected to be set after recovery is complete.
In StartupXLOG, replace the local variables ThisTimeLineID and
PrevTimeLineID with new local variables replayTLI and newTLI. In the
old scheme, ThisTimeLineID was the replay TLI until we created a new
timeline, and after that the replay TLI was in PrevTimeLineID. Now,
replayTLI is the TLI from which we last replayed WAL throughout the
entire function, and newTLI is either that, or the new timeline created
upon promotion.
Remove some misleading comments from the comment block just above where
recoveryTargetTimeLineGoal and friends are declared. It's become
incorrect, not only because ThisTimeLineID as a variable is now gone,
but also because the rmgr code does not care about ThisTimeLineID and
has not since what used to be the TLI field in the page header was
repurposed to store the page checksum.
Add a comment GetFlushRecPtr that it's only supposed to be used in
normal running, and an assertion to verify that this is so.
Per some ideas from Michael Paquier and some of my own. Review by
Michael Paquier also.
Discussion: http://postgr.es/m/CA+TgmoY1a2d1AnVR3tJcKmGGkhj7GGrwiNwjtKr21dxOuLBzCQ@mail.gmail.com
Quite a few buildfarm animals are warning about this, and lapwing
is actually failing (because -Werror). It's a false positive AFAICS,
so no need to do more than zero the variable to start with.
Discussion: https://postgr.es/m/YYXJnUxgw9dZKxlX@paquier.xyz
Peter Eisentraut
Jeff Davis
Michael Paquier
Tom Lane
Peter Geoghegan
Thomas Munro
Alvaro Herrera
Robert Haas
David Rowley
Daniel Gustafsson
Andres Freund
Stephen Frost
John Naylor
Dean Rasheed
Heikki Linnakangas
Amit Kapila
Alexander Korotkov
Bruce Momjian
Tomas Vondra
Fujii Masao
Noah Misch