in the formerly-always-blank columns just to left and right of the data.
Different marking is used for a line break caused by a newline in the data
than for a straight wraparound. A newline break is signaled by a "+" in the
right margin column in ASCII mode, or a carriage return arrow in UNICODE mode.
Wraparound is signaled by a dot in the right margin as well as the following
left margin in ASCII mode, or an ellipsis symbol in the same places in UNICODE
mode. "\pset linestyle old-ascii" is added to make the previous behavior
available if anyone really wants it.
In passing, this commit also cleans up a few regression test files that
had unintended spacing differences from the current actual output.
Roger Leigh, reviewed by Gabrielle Roth and other members of PDXPUG.
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
strength of database passwords, and create a sample implementation of
such a hook as a new contrib module "passwordcheck".
Laurenz Albe, reviewed by Takahiro Itagaki
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
default be "throw error on conflict", as per discussions. The GUC variable
is plpgsql.variable_conflict, with values "error", "use_variable",
"use_column". The behavior can also be specified per-function by inserting
one of
#variable_conflict error
#variable_conflict use_variable
#variable_conflict use_column
at the start of the function body.
The 8.5 release notes will need to mention using "use_variable" to retain
backward-compatible behavior, although we should encourage people to migrate
to the much less mistake-prone "error" setting.
Update the plpgsql documentation to match this and other recent changes.
it works just as well to have them be ordinary identifiers, and this gets rid
of a number of ugly special cases. Plus we aren't interfering with non-rule
usage of these names.
catversion bump because the names change internally in stored rules.
behavior, and is so little used that no one has been interested in fixing it.
To ensure that possible uses are covered, remove the ALIAS declaration's
arbitrary restriction that only $n identifiers can be aliased.
(We could alternatively make RENAME act just like ALIAS, but per discussion
having two different ways to do the same thing is probably more confusing than
helpful.)
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
for example in
WITH w AS (SELECT * FROM foo) SELECT * FROM w, bar ... FOR UPDATE
the FOR UPDATE will now affect bar but not foo. This is more useful and
consistent than the original 8.4 behavior, which tried to propagate FOR UPDATE
into the WITH query but always failed due to assorted implementation
restrictions. Even though we are in process of removing those restrictions,
it seems correct on philosophical grounds to not let the outer query's
FOR UPDATE affect the WITH query.
In passing, fix isLockedRel which frequently got things wrong in
nested-subquery cases: "FOR UPDATE OF foo" applies to an alias foo in the
current query level, not subqueries. This has been broken for a long time,
but it doesn't seem worth back-patching further than 8.4 because the actual
consequences are minimal. At worst the parser would sometimes get
RowShareLock on a relation when it should be AccessShareLock or vice versa.
That would only make a difference if someone were using ExclusiveLock
concurrently, which no standard operation does, and anyway FOR UPDATE
doesn't result in visible changes so it's not clear that the someone would
notice any problem. Between that and the fact that FOR UPDATE barely works
with subqueries at all in existing releases, I'm not excited about worrying
about it.
style by default. Per discussion, there seems to be hardly anything that
really relies on being able to change the regex flavor, so the ability to
select it via embedded options ought to be enough for any stragglers.
Also, if we didn't remove the GUC, we'd really be morally obligated to
mark the regex functions non-immutable, which'd possibly create performance
issues.
Per recent discussion, add_missing_from has been deprecated for long enough to
consider removing, and it's getting in the way of planned parser refactoring.
The system now always behaves as though add_missing_from were OFF.
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Itagaki Takahiro
ASCII-art style of table output to be upgraded to use Unicode box drawing
characters if desired. By default, psql will use the Unicode characters
whenever client_encoding is UTF8.
The patch forces linestyle=ascii in pg_regress usage, ensuring we don't
break the regression tests in Unicode locales.
Roger Leigh
* Stop escaping ? and {. As of SQL:2008, SIMILAR TO is defined to have
POSIX-compatible interpretation of ? as well as {m,n} and related constructs,
so we should allow these things through to our regex engine.
* Escape ^ and $. It appears that our regex engine will treat ^^ at the
beginning of the string the same as ^, and similarly for $$ at the end of
the string, which meant that SIMILAR TO was effectively ignoring ^ at the
start of the pattern and $ at the end. Since these are not supposed to be
metacharacters, this is a bug.
The second part of this is arguably a back-patchable bug fix, but I'm
hesitant to do that because it might break applications that are expecting
something like "col SIMILAR TO '^foo$'" to work like a POSIX pattern.
Seems safer to only change it at a major version boundary.
Per discussion of an example from Doug Gorley.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Marko Tiikkaja
Add a variant of pg_get_triggerdef with a second argument "pretty" that
causes the output to be formatted in the way pg_dump used to do. Use this
variant in pg_dump with server versions >= 8.5.
This insulates pg_dump from most future trigger feature additions, such as
the upcoming column triggers patch.
Author: Itagaki Takahiro <itagaki.takahiro@oss.ntt.co.jp>
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Catalog version bumped.
Most things should be cleaned by "make clean", except the parts that are
shipped in the tarball. These rules had gotten a bit out of whack after
the various restructurings of the documentation build rules.
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
in CREATE OR REPLACE FUNCTION. The original code would update pg_shdepend
as if a new function was being created, even if it wasn't, with two bad
consequences: pg_shdepend might record the wrong owner for the function,
and any dependencies for roles mentioned in the function's ACL would be lost.
The fix is very easy: just don't touch pg_shdepend at all when doing a
function replacement.
Also update the CREATE FUNCTION reference page, which never explained
exactly what changes and doesn't change in a function replacement.
In passing, fix the CREATE VIEW reference page similarly; there's no
code bug there, but the docs didn't say what happens.
Remove the 64K limit on the lengths of keys and values within an hstore.
(This changes the on-disk format, but the old format can still be read.)
Add support for btree/hash opclasses for hstore --- this is not so much
for actual indexing purposes as to allow use of GROUP BY, DISTINCT, etc.
Add various other new functions and operators.
Andrew Gierth
hand-assigned rowtype OIDs, even when they are not "bootstrapped" catalogs
that have handmade type rows in pg_type.h. Give pg_database such an OID.
Restore the availability of C macros for the rowtype OIDs of the bootstrapped
catalogs. (These macros are now in the individual catalogs' .h files,
though, not in pg_type.h.)
This commit doesn't do anything especially useful by itself, but it's
necessary infrastructure for reverting some ill-considered changes in
relcache.c.
to create a function for it.
Procedural languages now have an additional entry point, namely a function
to execute an inline code block. This seemed a better design than trying
to hide the transient-ness of the code from the PL. As of this patch, only
plpgsql has an inline handler, but probably people will soon write handlers
for the other standard PLs.
In passing, remove the long-dead LANCOMPILER option of CREATE LANGUAGE.
Petr Jelinek
This is intentionally similar to the recently revised syntax for EXPLAIN
options, ie, (name value, ...). The old syntax is still supported for
backwards compatibility, but we intend that any options added in future
will be provided only in the new syntax.
Robert Haas, Emmanuel Cecchet
Instead of requiring translators to translate the entire SQL command
synopses, change create_help.pl to only require them to translate the
placeholders, and paste those into the synopsis using a printf mechanism.
Make some small updates to the markup to make it easier to parse.
Note: This causes msgmerge of gettext 0.17 to segfault. You will need
the patch from https://savannah.gnu.org/bugs/?27474 to make it work.
msgmerge usually only runs on babel.postgresql.org, however.
use that value when the backend is new enough to allow it. This responds
to bug report from Keh-Cheng Chu pointing out that although 2 extra digits
should be sufficient to dump and restore float8 exactly, it is possible to
need 3 extra digits for float4 values.
build actually attempts to advertise itself via Bonjour. Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not. The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build. Per discussion.
to unload and re-load the library.
The difficulty with unloading a library is that we haven't defined safe
protocols for doing so. In particular, there's no safe mechanism for
getting out of a "hook" function pointer unless libraries are unloaded
in reverse order of loading. And there's no mechanism at all for undefining
a custom GUC variable, so GUC would be left with a pointer to an old value
that might or might not still be valid, and very possibly wouldn't be in
the same place anymore.
While the unload and reload behavior had some usefulness in easing
development of new loadable libraries, it's of no use whatever to normal
users, so just disabling it isn't giving up that much. Someday we might
care to expend the effort to develop safe unload protocols; but even if
we did, there'd be little certainty that every third-party loadable module
was following them, so some security restrictions would still be needed.
Back-patch to 8.2; before that, LOAD was superuser-only anyway.
Security: unprivileged users could crash backend. CVE not assigned yet
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
so that their elements are always taken as simple expressions over the
query's input columns. It originally seemed like a good idea to make them
act exactly like GROUP BY and ORDER BY, right down to the SQL92-era behavior
of accepting output column names or numbers. However, that was not such a
great idea, for two reasons:
1. It permits circular references, as exhibited in bug #5018: the output
column could be the one containing the window function itself. (We actually
had a regression test case illustrating this, but nobody thought twice about
how confusing that would be.)
2. It doesn't seem like a good idea for, eg, "lead(foo) OVER (ORDER BY foo)"
to potentially use two completely different meanings for "foo".
Accordingly, narrow down the behavior of window clauses to use only the
SQL99-compliant interpretation that the expressions are simple expressions.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
Instead of sending stdout/stderr to /dev/null after forking away from the
terminal, send them to postmaster.log within the data directory. Since
this opens the door to indefinite logfile bloat, recommend even more
strongly that log output be redirected when using silent_mode.
Move the postmaster's initial calls of load_hba() and load_ident() down
to after we have started the log collector, if we are going to. This
is so that errors reported by them will appear in the "usual" place.
Reclassify silent_mode as a LOGGING_WHERE, not LOGGING_WHEN, parameter,
since it's got absolutely nothing to do with the latter category.
In passing, fix some obsolete references to -S ... this option hasn't
had that switch letter for a long time.
Back-patch to 8.4, since as of 8.4 load_hba() and load_ident() are more
picky (and thus more likely to fail) than they used to be. This entire
change was driven by a complaint about those errors disappearing into
the bit bucket.
about it doesn't simplify the grammar at all, and it does invite confusion
among those who only read the SELECT syntax summary and not the full details.
Per gripe from Jaime Casanova.
It turns out that Python 2.2 is the oldest version that PL/Python compiles
with, apparently related to the introduction of iterators. Might as well
document this.
Documentation files in HTML and man formats are now prepared for
distribution using the distprep make target, like everything else. They
are placed in doc/src/sgml/html and manX and installed from there by
make install, if present. The business with the tarballs in the tarball
is gone.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
This patch adds declaration so that they end up in section 3, and adds
them to the Makefiles to install them.
Also, some synopses needed reflowing so that they look nice in 80-column
terminals.
Adds the ability to retrieve async notifications using dblink,
via the addition of the function dblink_get_notify(). Original patch
by Marcus Kempe, suggestions by Tom Lane and Alvaro Herrera, patch
review and adjustments by Joe Conway.
This switches the man page building process to use the DocBook XSL stylesheet
toolchain. The previous targets for Docbook2X are removed. configure has been
updated to look for the new tools. The Documentation appendix contains the
new build instructions. There are also a few isolated tweaks in the
documentation to improve places that came out strangely in the man pages.
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
already treating it as text anyway, to the point that I couldn't find anything
to change except the datatype markings in catalog/*.h. The only effect that
the bytea declaration had was to cause byteaout() to be invoked when pg_dump
(or another client program) inspected the column value. Since pg_dump wasn't
expecting that, but just treating what it got as text, the net result is that
dump and reload would mangle any backslashes or non-ASCII characters in the
filename string for a C-language function. That is a very long-standing bug,
but given the lack of field complaints it doesn't seem worth trying to find
a back-patchable fix. We'll just make this change to fix it going forward.
This change will also forestall problems after the planned change to let bytea
emit hex output instead of escaped characters.
Add family of functions that did not exist earlier,
mainly due to historical omission. Original patch by
Abhijit Menon-Sen, with review and modifications by
Joe Conway. catversion.h bumped.
reviewed by Greg Smith and Josh Williams.
Following is the proposal from ITAGAKI Takahiro:
Pgbench is a famous tool to measure postgres performance, but nowadays
it does not work well because it cannot use multiple CPUs. On the other
hand, postgres server can use CPUs very well, so the bottle-neck of
workload is *in pgbench*.
Multi-threading would be a solution. The attached patch adds -j
(number of jobs) option to pgbench. If the value N is greater than 1,
pgbench runs with N threads. Connections are equally-divided into
them (ex. -c64 -j4 => 4 threads with 16 connections each). It can
run on POSIX platforms with pthread and on Windows with win32 threads.
Here are results of multi-threaded pgbench runs on Fedora 11 with intel
core i7 (8 logical cores = 4 physical cores * HT). -j8 (8 threads) was
the best and the tps is 4.5 times of -j1, that is a traditional result.
$ pgbench -i -s10
$ pgbench -n -S -c64 -j1 => tps = 11600.158593
$ pgbench -n -S -c64 -j2 => tps = 17947.100954
$ pgbench -n -S -c64 -j4 => tps = 26571.124001
$ pgbench -n -S -c64 -j8 => tps = 52725.470403
$ pgbench -n -S -c64 -j16 => tps = 38976.675319
$ pgbench -n -S -c64 -j32 => tps = 28998.499601
$ pgbench -n -S -c64 -j64 => tps = 26701.877815
Is it acceptable to use pthread in contrib module?
If ok, I will add the patch to the next commitfest.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
not forced out-of-line unless that is necessary to make the row fit on a
page. Previously, they were forced out-of-line if needed to get the row
down to the default target size (1/4th page).
Kevin Grittner
The English FAQ has been moved to the wiki, so the translated versions should
have been removed at that point as well.
The FAQ_MINGW.html should have been removed when the platform FAQs were
integrated into the documentation (or earlier).
applied to both 8.4 and 8.5
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
Set up proper makefile dependencies in the documentation build rules,
especially around the HTML/index build. The problem we've had with all
previous solutions is that we have used the same file name, such as HTML.index
or bookindex.sgml, to mean different things at different stages of the build,
and make can't distinguish that. The solution here is that the first jade run
produces HTML.index, but does not require bookindex.sgml at all, and produces
no other html output (the latter an idea from Alvaro). The second jade run
includes bookindex.sgml, but does not recreate HTML.index. That way, when you
change an sgml file, jade is run twice and at the end all dependencies are
satisfied. Omitting the html output in the first stage also makes the full
build a lot faster.
When you run one of the print format targets, only the first jade run is run,
then the print target-specific commands. If an HTML build has completed
previously, the first jade run is skipped because the dependencies have
already been satisfied.
The draft and check targets for quick builds and syntax verification are still
there.
update documentation accordingly. This is required in order to have support
for a reentrant scanner. I'm committing this bit separately in order to have
an easy reference if we later decide to make the minimum something different
(like 2.5.33).
as noted by Sebastien Flaesch. Also update the claim that we simply throw
away fields outside this set --- that got changed later to only discard
less-significant fields.
For character types with typmod, character_octet_length columns in the
information schema now show the maximum character length times the
maximum length of a character in the server encoding, instead of some
huge value as before.
but the cure appears to be worse than the disease. It turns out that GNU
tar versions 1.14.x misinterpret -o as --same-owner, not --no-same-owner,
leading to exactly the wrong behavior for both root and nonroot users.
While that bug has been fixed for nearly five years, these tar versions
are still found in the wild, notably in OS X 10.4. Given that #4883 was
the first complaint we'd heard, it's definitely not worth fixing at the
risk of breaking things for other users. Perhaps revisit at a later date
when we're not up against a release deadline.
file to be a symlink. We tried to fix this issue with an earlier server-side
patch, but it didn't fix the whole issue.
The same bug is present in older releases as well, but the 8.4 train is
about to leave the station, and I'm not sure if have consensus on whether
we can remove the -l option in back-branches or do we need to attempt a
server-side fix to make symlinking safe.
Patch by Simon Riggs, per discussion on bug identified by Fujii Masao.
used to work as intended, but got broken some time ago (a quoted empty string
is not an empty string), and got broken some more by the changes to generate
ecpg's preproc.y automatically. Given all the unprotected uses of $(PERL)
elsewhere, it seems best to make use of the $(missing) script rather than
trying to ensure each such use is protected individually. Also fix various
bits of documentation that omitted to mention Perl as a requirement for
building from a CVS pull. Per a complaint from Robert Haas.
ArrayBuildState, per trouble report from Merlin Moncure. By adopting
this fix, we are essentially deciding that aggregate final-functions
should not modify their inputs ever. Adjust documentation and comments
to match that conclusion.
In particular, always show 0 for the date type instead of null, and show
6 (the default) for time, timestamp, and interval without a declared
precision. This is now in fuller conformance with the SQL standard.
Also clarify the documentation about this.
discovered and analyzed by Konstantin Izmailov and Tom Lane
The original implementation of the 3-argument form of get_raw_page() risked
core dumps if the 8.3 SQL function definition was mistakenly used with the
8.4 module, which is entirely likely after a dump-and-reload upgrade. To
protect 8.4 beta testers against upgrade problems, add a check on PG_NARGS.
In passing, fix missed additions to the uninstall script, and polish the
docs a trifle.
the <@ and @> operators. These are not in fact equivalent to the built-in
anyarray operators of the same names, because they have different behavior for
empty arrays, namely they don't think empty arrays are contained in anything.
That is mathematically wrong, no doubt, but until we can persuade GIN indexes
to implement the mathematical definition we should probably not change this.
Another reason for not changing it now is that we can't yet ensure the
opclasses will be updated correctly in a dump-and-reload upgrade. Per
recent discussions.
by extending the ereport() API to cater for pluralization directly. This
is better than the original method of calling ngettext outside the elog.c
code because (1) it avoids double translation, which wastes cycles and in
the worst case could give a wrong result; and (2) it avoids having to use
a different coding method in PL code than in the core backend. The
client-side uses of ngettext are not touched since neither of these concerns
is very pressing in the client environment. Per my proposal of yesterday.
instead just pointing out that a larger value may trigger use of GEQO.
Per Robert Haas.
In passing, do a bit of wordsmithing on the Genetic Query Optimizer section.
an expression that's not supposed to contain variables. Per discussion
with Gevik Babakhani, this eliminates the need for an ugly kluge (namely,
specifying some unrelated relation name). Remove one such kluge from
pg_dump.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
pgbench_history, and pgbench_tellers, rather than just accounts, branches,
history, and tellers. This is to prevent accidental conflicts with real
application tables, as has been reported to happen at least once. Also
remove the automatic "SET search_path = public" that it did at startup,
as this seems to restrict testing flexibility without actually buying much.
Per proposal by Joshua Drake and ensuing discussion.
Joshua Drake and Tom Lane
must be used for the new database, except when copying from template0.
This is the same rule that we now enforce for locale settings, and it has
the same motivation: databases other than template0 might contain data that
would be invalid according to a different setting. This represents another
step in a continuing process of locking down ways in which encoding violations
could occur inside the backend. Per discussion of a few days ago.
In passing, fix pre-existing breakage of mbregress.sh, and fix up a couple
of ereport() calls in dbcommands.c that failed to specify sqlstate codes.
as per my recent proposal. release.sgml itself is now just a stub that should
change rarely; ideally, only once per major release to add a new include line.
Most editing work will occur in the release-N.N.sgml files. To update a back
branch for a minor release, just copy the appropriate release-N.N.sgml
file(s) into the back branch.
This commit doesn't change the end-product documentation at all, only the
source layout. However, it makes it easy to start omitting ancient information
from newer branches' documentation, should we ever decide to do that.
never a BEGIN block. This is required for Oracle compatibility and is
also plainly stated to be the behavior by our original documentation
(up until 8.1, in which the docs were adjusted to match the code's behavior;
but actually the old docs said the correct thing and the code was wrong).
Not back-patched because this introduces an incompatibility that could
break working applications. Requires release note.
"verify-ca" and "verify-full".
Since "prefer" remains the default, this will make certificate validation
off by default, which should lead to less upgrade issues.
Explain how vacuum_freeze_table_age should be tuned, and how it relates
to the other settings. Mention that vacuum_freeze_table_age also affects
when autovacuum scans the whole table.
documentation warnings against setting it nonzero unless active use of
prepared transactions is intended and a suitable transaction manager has been
installed. This should help to prevent the type of scenario we've seen
several times now where a prepared transaction is forgotten and eventually
causes severe maintenance problems (or even anti-wraparound shutdown).
The only real reason we had the default be nonzero in the first place was to
support regression testing of the feature. To still be able to do that,
tweak pg_regress to force a nonzero value during "make check". Since we
cannot force a nonzero value in "make installcheck", add a variant regression
test "expected" file that shows the results that will be obtained when
max_prepared_transactions is zero.
Also, extend the HINT messages for transaction wraparound warnings to mention
the possibility that old prepared transactions are causing the problem.
All per today's discussion.
more nearly matching the core SQL scanner. The user-visible effects are:
* Block comments (slash-star comments) now nest, as per SQL spec.
* In standard_conforming_strings mode, backslash as the last character of a
non-E string literal is now correctly taken as an ordinary character;
formerly it was misinterpreted as escaping the ending quote. (Since the
string also had to pass through the core scanner, this invariably led
to syntax errors.)
* Formerly, backslashes in the format string of RAISE were always treated as
quoting the next character, regardless of mode. Now, they are ordinary
characters with standard_conforming_strings on, while with it off, they
introduce the same set of escapes as in the core SQL scanner. Also,
escape_string_warning is now effective for RAISE format strings. These
changes make RAISE format strings work just like any other string literal.
This is implemented by copying and pasting a lot of logic from the core
scanner. It would be a good idea to look into getting rid of plpgsql's
scanner entirely in favor of using the core scanner. However, that involves
more change than I can justify making during beta --- in particular, the core
scanner would have to become re-entrant.
In passing, remove the kluge that made the plpgsql scanner emit T_FUNCTION or
T_TRIGGER as a made-up first token. That presumably had some value once upon
a time, but now it's just useless complication for both the scanner and the
grammar.
etc are no longer guaranteed to produce sorted output; per gripe from Ian
Barwick. Also improve the release note entries about to_timestamp(), per
Brendan Jurd.
how this ought to behave for multi-dimensional arrays. Per discussion,
not having it at all seems better than having it with what might prove
to be the wrong behavior. We can always add it later when we have consensus
on the correct behavior.
cstring from the output of \df. Now that the default behavior is to
exclude all system functions, the de-cluttering rationale for this behavior
seems pretty weak; and it was always quite confusing/unhelpful if you were
actually looking for I/O functions. (Not to mention if you were looking
for encoding converters or other cases that might take or return cstring.)
the checkpoint in immediate or lazy mode. This is to address complaints
that pg_start_backup() takes a long time even when there's no need to minimize
its I/O consumption.
don't cause confusion with the built-in anyarray versions of those operators.
Adjust the module's index opclasses to support the built-in operators in place
of the private ones.
The private implementations are still available under their historical
names @ and ~, so no functionality is lost. Some quick testing suggests
that they offer no real benefit over the core operators, however.
Per a complaint from Rusty Conover.
relations (including a temp table's indexes and toast table/index), and
false for normal relations. For ease of checking, this commit just adds
the column and fills it correctly --- revising the relation access machinery
to use it will come separately.
method to pass extra data to the consistent() and comparePartial() methods.
This is the core infrastructure needed to support the soon-to-appear
contrib/btree_gin module. The APIs are still upward compatible with the
definitions used in 8.3 and before, although *not* with the previous 8.4devel
function definitions.
catversion bump for changes in pg_proc entries (although these are just
cosmetic, since GIN doesn't actually look at the function signature before
calling it...)
Teodor Sigaev and Oleg Bartunov
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
probes --- the BUFFER_READ_DONE probe provides the same information and more
besides. Expand the LOCK_WAIT_START/DONE probe arguments so that there's
actually some chance of telling what is being waited for. Update and
clean up the documentation.
is still available, but you must now write the long equivalent --inserts
or --column-inserts. This change is made to eliminate confusion with the
use of -d to specify a database name in most other Postgres client programs.
Original patch by Greg Mullane, modified per subsequent discussion.
noise words for the last twelve years, for compatibility with Berkeley-era
output formatting of the special INVALID values for those datatypes.
Considering that the datatypes themselves have been deprecated for awhile,
this is taking backwards compatibility a little far. Per gripe from Josh
Berkus.