We show duplicate values for child tables in publications that have both
child and parent tables and are published with publish_via_partition_root
as false which is not what the user would expect.
We decided not to backpatch this as there is no user complaint about this
and it doesn't seem to be a critical issue.
Author: Hou Zhijie
Reviewed-by: Bharath Rupireddy, Amit Langote, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716E97F00732B52DC2BBC2594989@OS0PR01MB5716.jpnprd01.prod.outlook.com
This simplifies the code so as it is not necessary anymore for the
caller of parse_subscription_options() to zero SubOpts, holding a
bitmaps of the provided options as well as the default/parsed option
values. This also simplifies some checks related to the options
supported by a command when checking for incompatibilities.
While on it, the errors generated for unsupported combinations with
"slot_name = NONE" are reordered. This may generate a different errors
compared to the previous major versions, but users have to go through
all those errors to get a correct command in this case when using
incorrect values for options "enabled" and "create\slot", so at the end
the resulting command would remain the same.
Author: Peter Smith
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/CAHut+PtXHfLgLHDDJ8ZN5f5Be_37mJoxpEsRg8LNmm4XCr06Rw@mail.gmail.com
REINDEX CONCURRENTLY run on a toast index or a toast relation could
corrupt the target indexes rebuilt, as a backend running in parallel
that manipulates toast values would directly release the lock on the
toast relation when its local operation is done, rather than releasing
the lock once the transaction that manipulated the toast values
committed.
The fix done here is simple: we now hold a ROW EXCLUSIVE lock on the
toast relation when saving or deleting a toast value until the
transaction working on them is committed, so as a concurrent reindex
happening in parallel would be able to wait for any activity and see any
new rows inserted (or deleted).
An isolation test is added to check after the case fixed here, which is
a bit fancy by design as it relies on allow_system_table_mods to rename
the toast table and its index to fixed names. This way, it is possible
to reindex them directly without any dependency on the OID of the
underlying relation. Note that this could not use a DO block either, as
REINDEX CONCURRENTLY cannot be run in a transaction block. The test is
backpatched down to 13, where it is possible, thanks to c4a7a39, to use
allow_system_table_mods in a test suite.
Reported-by: Alexey Ermakov
Analyzed-by: Andres Freund, Noah Misch
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/17268-d2fb426e0895abd4@postgresql.org
Backpatch-through: 12
Certain settings from configuration or the Makefile infrastructure are
used by the TAP tests, but were not being set up by vcregress.pl. This
remedies those omissions. This should increase test coverage, especially
on the buildfarm.
Reviewed by Noah Misch
Discussion: https://postgr.es/m/17093da5-e40d-8335-d53a-2bd803fc38b0@dunslane.net
Backpatch to all live branches.
Further experimentation shows that commit 6051857fc is not sufficient
when using (some versions of?) OpenSSL. The reason is obscure, but
calling shutdown(socket, SD_SEND) improves matters.
Per testing by Andrew Dunstan and Alexander Lakhin.
Back-patch as before.
Discussion: https://postgr.es/m/af5e0bf3-6a61-bb97-6cba-061ddf22ff6b@dunslane.net
In parallel mode, pg_dump tries to order the table-data-dumping
jobs with the largest tables first. However, it was only
consulting the pg_class.relpages value to determine table size.
This ignores TOAST data, and so we could make poor scheduling
decisions in cases where some large tables are mostly TOASTed
data while others have very little. To fix, add in the relpages
value for the TOAST table as well.
This patch also fixes a potential integer-overflow issue that
could result in poor scheduling on machines where off_t is
only 32 bits wide. Such platforms are probably extinct in the
wild, but we do still nominally support them, so repair.
Per complaint from Hans Buschmann.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
For objects such as functions, pg_dump issues the same secondary
data-collection query against each object to be dumped. This can't
readily be refactored to avoid the repetitive queries, but we can
PREPARE these queries to reduce planning costs.
This patch applies the idea to functions, aggregates, operators, and
data types. While it could be carried further, the remaining sorts of
objects aren't likely to appear in typical databases enough times to
be worth worrying over. Moreover, doing the PREPARE is likely to be a
net loss if there aren't at least some dozens of objects to apply the
prepared query to.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Instead of issuing a secondary data-collection query against each
table to be dumped, issue just one query, with a WHERE clause
restricting it to be applied to only the tables we intend to dump.
Likewise for indexes, constraints, and triggers. This greatly
reduces the number of queries needed to dump a database containing
many tables. It might seem that WHERE clauses listing many target
OIDs could be inefficient, but at least on recent server versions
this provides a very substantial speedup.
(In principle the same thing could be done with other object types
such as functions; but that would require significant refactoring
of pg_dump, so those will be tackled in a different way in a
following patch.)
The new WHERE clauses depend on the unnest() function, which is
only present in 8.4 and above. We could implement them differently
for older servers, but there is an ongoing discussion that will
probably result in dropping pg_dump support for servers before 9.2,
so that seems like it'd be wasted work. For now, just bump the
server version check to require >= 8.4, without stopping to remove
any of the code that's thereby rendered dead. We'll mop that
situation up soon.
Patch by me, based on an idea from Andres Freund.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Avoid calling pg_get_partkeydef(), pg_get_expr(relpartbound),
and regtypeout until we have lock on the relevant tables.
The existing coding is at serious risk of failure if there
are any concurrent DROP TABLE commands going on --- including
drops of other sessions' temp tables.
Arguably this is a bug fix that should be back-patched, but it's
moderately invasive and we've not had all that many complaints
about such failures. Let's just put it in HEAD for now.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Throw away most of the existing logic for this, as it was very
inefficient thanks to expensive sub-selects executed to collect
ACL data that we very possibly would have no interest in dumping.
Reduce the ACL handling in the initial per-object-type queries
to be just collection of the catalog ACL fields, as it was
originally. Fetch pg_init_privs data separately in a single
scan of that catalog, and do the merging calculations on the
client side. Remove the separate code path used for pre-9.6
source servers; there is no good reason to treat them differently
from newer servers that happen to have empty pg_init_privs.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Split the DumpableObject.dump bitmask field into separate bitmasks
tracking which components are requested to be dumped (in the
existing "dump" field) and which components exist for the particular
object (in the new "components" field). This gets rid of some
klugy and easily-broken logic that involved setting bits and later
clearing them. More importantly, it restores the originally intended
behavior that pg_dump's secondary data-gathering queries should not
be executed for objects we have no interest in dumping. That
optimization got broken when the dump flag was turned into a bitmask,
because irrelevant bits tended to remain set in many cases. Since
the "components" field starts from a minimal set of bits and is
added onto as needed, ANDing it with "dump" provides a reliable
indicator of what we actually have to dump, without having to
complicate the logic that manages the request bits. This makes
a significant difference in the number of queries needed when,
for example, there are many functions in extensions.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
The chr() function used PG_GETARG_UINT32() even though the argument is
declared as (signed) integer. As a result, you can pass negative
arguments to this function and it internally interprets them as
positive. Ultimately ends up being harmless, but it seems wrong, so
fix this and rearrange the internal error checking a bit to
accommodate this.
Another case was in the documentation, where example code used
PG_GETARG_UINT32() with an argument declared as signed integer.
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://www.postgresql.org/message-id/flat/7e43869b-d412-8f81-30a3-809783edc9a3%40enterprisedb.com
Perl's hex() function complains if its argument contains trailing white
space (or in fact anything other than hex digits), so remove the
offending text.
The temporary path generated in commit c113d8ad5 cannot be passed as-is in
the connection string on Windows since the path delimiting backslashes will
be treated as escape characters. Fix by converting backslash to slash as in
similar path usecases in other tests.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211202195130.e7pprpsx4ell22sp@alap3.anarazel.de
This commit fixes a couple of inconsistencies in the descriptions of
some GUCs, while making their wording more general regarding the units
they rely on.
For most of them, this removes the use of terms like "N seconds" or "N
bytes", which may not apply easily to all the languages these strings
are translated to (from my own experience, this works in French and
English, less in Japanese).
Per debate between the authors listed below.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20211129030833.GJ17618@telsasoft.com
It turns out that this is necessary to keep Winsock from dropping any
not-yet-sent data, such as an error message explaining the reason for
process termination. It's pretty weird that the implicit close done
by the kernel acts differently from an explicit close, but it's hard
to argue with experimental results.
Independently submitted by Alexander Lakhin and Lars Kanis (comments
by me, though). Back-patch to all supported branches.
Discussion: https://postgr.es/m/90b34057-4176-7bb0-0dbb-9822a5f6425b@greiz-reinsdorf.de
Discussion: https://postgr.es/m/16678-253e48d34dc0c376@postgresql.org
Checking for RELKIND_MATVIEW was forgotten in
guessConstraintInheritance(). This isn't a live problem, since it is
checked in flagInhTables() which relkinds can have parents, and those
entries will have numParents==0 after that. But after discussion it
was felt that this place should be kept consistent with
flagInhTables() and flagInhAttrs().
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/a574c8f1-9c84-93ad-a9e5-65233d6fc00f@enterprisedb.com
Previously, pg_waldump would not display its statistics summary if it
got interrupted by SIGINT (or say a simple Ctrl+C). It gains with this
commit a signal handler for SIGINT, trapping the signal to exit at the
earliest convenience to allow a display of the stats summary before
exiting. This makes the reports more interactive, similarly to strace
-c.
This new behavior makes the combination of the options --stats and
--follow much more useful, so as the user will get a report for any
invocation of pg_waldump in such a case. Information about the LSN
range of the stats computed is added as a header to the report
displayed.
This implementation comes from a suggestion by Álvaro Herrera and
myself, following a complaint by the author of this patch about --stats
and --follow not being useful together originally.
As documented, this is not supported on Windows, though its support
would be possible by catching the terminal events associated to Ctrl+C,
for example (this may require a more centralized implementation, as
other tools could benefit from a common API).
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACUUx3PcK2z9h0_m7vehreZAUbcmOky9WSEpe8TofhV=PQ@mail.gmail.com
The existing pg_upgrade/test.sh and the buildfarm code have been holding
the same set of SQL queries when doing cross-version upgrade tests to
adapt the objects created by the regression tests before the upgrade
(mostly, incompatible or non-existing objects need to be dropped from
the origin, perhaps re-created).
This moves all those SQL queries into a new, separate, file with a set
of \if clauses to handle the version checks depending on the old version
of the cluster to-be-upgraded.
The long-term plan is to make the buildfarm code re-use this new SQL
file, so as committers are able to fix any compatibility issues in the
tests of pg_upgrade with a refresh of the core code, without having to
poke at the buildfarm client. Note that this is only able to handle the
main regression test suite, and that nothing is done yet for contrib
modules yet (these have more issues like their database names).
A backpatch down to 10 is done, adapting the version checks as this
script needs to be only backward-compatible, so as it becomes possible
to clean up a maximum amount of code within the buildfarm client.
Author: Justin Pryzby, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 10
The various ALTER OWNER routines tend to leak memory in
CurrentMemoryContext. That's not a problem when they're only called
once per command; but in this usage where we might be touching many
objects, it can amount to a serious memory leak. Fix that by running
each call in a short-lived context.
(DROP OWNED BY likely has a similar issue, except that you'll probably
run out of lock table space before noticing. REASSIGN is worth fixing
since for most non-table object types, it won't take any lock.)
Back-patch to all supported branches. Unfortunately, in the back
branches this helps to only a limited extent, since the sinval message
queue bloats quite a lot in this usage before commit 3aafc030a,
consuming memory more or less comparable to what's actually leaked.
Still, it's clearly a leak with a simple fix, so we might as well fix it.
Justin Pryzby, per report from Guillaume Lelarge
Discussion: https://postgr.es/m/CAECtzeW2DAoioEGBRjR=CzHP6TdL=yosGku8qZxfX9hhtrBB0Q@mail.gmail.com
Readline's meta-# command is supposed to insert a comment marker
at the start of the current line. However, the default marker is
"#" which is entirely unhelpful for SQL. Set it to "-- " instead.
(This setting can still be overridden in one's ~/.inputrc file,
so this change won't affect people who have already taken steps
to make the command useful.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
If we've not yet collected any non-whitespace, non-comment token for a
new query, flush the current input line to history before reading
another line. This aligns psql's history behavior with the observation
that lines containing only comments are generally not thought of as
being part of the next query. psql's prompting behavior is consistent
with that view, too, since it won't change the prompt until you
enter something that's neither whitespace nor a "--" comment.
Greg Nancarrow, simplified a bit by me
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
psql's lexer has historically deleted dash-dash (single-line) comments
from what's collected and sent to the server. This is inconsistent
with what it does for slash-star comments, and people have complained
before that they wish such comments would be captured in the server log.
Undoing the decision completely seems like too big a behavioral change,
however. In particular, comments on lines preceding the start of a
query are generally not thought of as being part of that query.
What we can do to improve the situation is to capture comments that
are clearly *within* a query, that is after the first non-whitespace,
non-comment token but before the query's ending semicolon or backslash
command. This is a nearly trivial code change, and it affects only a
few regression test results.
(It is tempting to try to apply the same rule to slash-star comments.
But it's hard to see how to do that without getting strange history
behavior for comments that cross lines, especially if the user then
starts a new query on the same line as the star-slash. In view of
the lack of complaints, let's leave that case alone.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
An extension can already de facto reserve a GUC prefix using
EmitWarningsOnPlaceholders(). But this was only checked against
settings that exist at the time the extension is loaded (or the
extension chooses to call this). No diagnostic is given when a SET
command later uses a nonexisting setting with a custom prefix.
With this change, EmitWarningsOnPlaceholders() saves the prefixes it
reserves in a list, and SET checks when it finds a "placeholder"
setting whether it belongs to a reserved prefix and issues a warning
in that case.
Add a regression test that checks the patch using the "plpgsql"
registered prefix.
Author: Florin Irion <florin.irion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HEvJDhWuuTpGTJT9Tgbdzm4QS4EzPAwDBScWK18H2Q=FVJFw@mail.gmail.com
Commit c113d8ad50 moved the copying of certificates into a temporary path
for the duration of the tests, instead of using the source tree. This broke
the tests on msys as the absolute path wasn't adapted for the msys platform.
Ensure to convert the path with perl2host before copying and passing in the
connection string.
While there also make certificate copying error handling uniform across all
the test suites.
Discussion: https://postgr.es/m/YacT3tm97xziSUFw@paquier.xyz
The tests didn't considered that an error unrelated to apply changes, e.g.
"replication origin with OID %d is already active ...", could occur on the
table sync worker before starting to copy changes.
To make the test robust we instead need to check the expected error and
the source of error which will be either tablesync or apply worker.
In passing remove the harmless option "streaming = off" from Create
Subscription command as that is anyway the default.
Per buildfarm member sidewinder.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Discussion: https://postgr.es/m/E1mrtvV-0002Gz-73@gemulon.postgresql.org
If the stat operation on the private key failed, the code assumed it
was due to an ENOENT, which may or may not be true. Extend the check
by printing a different error message on non-ENOENT errors for easier
debugging.
Per suggestion by Tom Lane due to an issue with the fairywren animal
in the buildfarm.
Discussion: https://postgr.es/m/1632478.1638305700@sss.pgh.pa.us
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
Like 5364b357fb did for pg_commit, change the formula used to
determine number of pg_commit_ts buffers, which helps performance with
larger servers.
Discussion: https://postgr.es/m/20210115220744.GA24457@alvherre.pgsql
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
The C4101 warning for unused variable cannot be individually suppressed
with PG_USED_FOR_ASSERTS_ONLY, and thus cause false-positive warnings
for variables which are defined but only read/written in an assertion.
Until a satisfactory solution for per-variable suppression like how we
do for gcc and clang, disable the warning.
Discussion: https://postgr.es/m/CAJcOf-c+KniGAp31pn8TC=9a-WHXpkX-3+8-2BkaCsZchhu=8w@mail.gmail.com
fsstate in process_pending_requests (in postgres_fdw.c) was added in
8998e3cafa as an assertion-only variable, 1ec7fca859 stated using
the variable outside of assertions.
rd_index in get_index_column_opclass (in lsyscache.c) was introduced
in 2a6368343f, and then promptly used in the fix commit 7e04160390
shortly thereafter.
This removes the PG_USED_FOR_ASSERTS_ONLY variable decoration from
the above mentioned variables.
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Discussion: https://postgr.es/m/F959106C-0F21-43A5-B2AE-D007D51ACBEE@yesql.se
The SSL and SCRAM TAP test suites both use temporary copies of the
supplied test keys in order to ensure correct permissions. These
were however copied inside the tree using temporary filenames rather
than a true temporary folder. Fix by using tmp_check supplied by
PostgreSQL::Test::Utils. Spotted by Tom Lane during review of the
nearby sslinfo TAP test patch.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/599244.1638041239@sss.pgh.pa.us
This adds rudimentary coverage of the sslinfo extension into the SSL
test harness. The output is validated by comparing with pg_stat_ssl
to provide some level of test stability should the underlying certs
be slightly altered. A new cert is added to provide an extension to
test against.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/E23F9811-0C77-45DA-912F-D809AB140741@yesql.se
In order to be able to test extensions with SSL connections, allow
configure_test_server_for_ssl to create any extensions passed as
an array. Each extension is created in all the test databases.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/E23F9811-0C77-45DA-912F-D809AB140741@yesql.se
This commit fixes some issues with GUCs:
- enable_incremental_sort was not marked as GUC_EXPLAIN, causing it to
not be listed in the output of EXPLAIN (SETTINGS) if using a value
different than the default, contrary to the other planner-level GUCs.
- trace_recovery_messages missed GUC_NOT_IN_SAMPLE, like the other
developer options.
- ssl_renegotiation_limit should be marked as COMPAT_OPTIONS_PREVIOUS.
While on it, this fixes one incorrect comment related to
autovacuum_freeze_max_age, and improves the descriptions of some other
GUCs, recently introduced.
Extracted from a larger patch set by the same author.
Author: Justin Pryzby
Description: https://postgr.es/m/20211129030833.GJ17618@telsasoft.com
This commit adds a new system view pg_stat_subscription_workers, that
shows information about any errors which occur during the application of
logical replication changes as well as during performing initial table
synchronization. The subscription statistics entries are removed when the
corresponding subscription is removed.
It also adds an SQL function pg_stat_reset_subscription_worker() to reset
single subscription errors.
The contents of this view can be used by an upcoming patch that skips the
particular transaction that conflicts with the existing data on the
subscriber.
This view can be extended in the future to track other xact related
statistics like the number of xacts committed/aborted for subscription
workers.
Author: Masahiko Sawada
Reviewed-by: Greg Nancarrow, Hou Zhijie, Tang Haiying, Vignesh C, Dilip Kumar, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
GetFinalPathNameByHandleA() cannot be used in compilation environments
where _WIN32_WINNT < 0x0600, meaning at least Windows XP used by some
buildfarm members under MinGW that Postgres still needs to support.
This was reported as a compilation warning by the buildfarm, but this is
actually worse than the report as the code would have not worked.
Instead, this switches to GetFileInformationByHandle() that is able to
fail for standard streams and succeed for redirected ones, which is what
we are looking for herein the code emulating fstat(). We also know that
it is able to work in all the environments still supported, thanks to
the existing logic of win32stat.c.
Issue introduced by 10260c7, so backpatch down to 14.
Reported-by: Justin Pryzby, via buildfarm member jacana
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha
Discussion: https://postgr.es/m/20211129050122.GK17618@telsasoft.com
Backpatch-through: 14
Commit 8523492d simplified what it meant for an item to be considered
"dead" to VACUUM: TIDs collected in memory (in preparation for index
vacuuming) must always come from LP_DEAD stub line pointers in heap
pages, found following pruning. This formalized the idea that index
vacuuming (and heap vacuuming) are optional processes. Unlike pruning,
they can be delayed indefinitely, without any risk of that violating
fundamental invariants. For example, leaving LP_DEAD items behind
clearly won't add to the risk of transaction ID wraparound. You can't
have transaction ID wraparound without transaction IDs. Renaming
anything that references DEAD tuples (tuples with storage) reinforces
all this.
Code outside vacuumlazy.c continues to fudge the distinction between
dead/deleted tuples, and LP_DEAD items. This is necessary because
autovacuum scheduling is still mostly driven by "dead items/tuples"
statistics. In the future we may find it useful to replace this model
with something more sophisticated, as a step towards teaching autovacuum
to perform more frequent vacuuming that targeting individual indexes
that happen to be more prone to becoming bloated through version churn.
In passing, simplify some function signatures that deal with VACUUM's
dead_items array.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzktGBg4si6DEdmq3q6SoXSDqNi6MtmB8CmmTmvhsxDTLA@mail.gmail.com
This reverts commits c2d1eea9e and 11b500072, as well as similar hacks
elsewhere, in favor of setting up the PGDLLIMPORT macro so that it can
just be used unconditionally. That can work because in frontend code,
we need no marking in either the defining or consuming files for a
variable exported from these libraries; and frontend code has no need
to access variables exported from the core backend, either.
While at it, write some actual documentation about the PGDLLIMPORT
and PGDLLEXPORT macros.
Patch by me, based on a suggestion from Robert Haas.
Discussion: https://postgr.es/m/1160385.1638165449@sss.pgh.pa.us
PGDLLIMPORT is only appropriate for variables declared in the backend,
not when the variable is coming from a library included in frontend code.
(This isn't a particularly nice fix, but for now, use the same method
employed elsewhere.)
Discussion: https://postgr.es/m/E1mrWUD-000235-Hq@gemulon.postgresql.org
This commit moves the timestamp computation of the control file within
the routine of src/common/ in charge of updating the backend's control
file, which is shared by multiple frontend tools (pg_rewind,
pg_checksums and pg_resetwal) and the backend itself.
This change has as direct effect to update the control file's timestamp
when writing the control file in pg_rewind and pg_checksums, something
that is helpful to keep track of control file updates for those
operations, something also tracked by the backend at startup within its
logs. This part is arguably a bug, as ControlFileData->time should be
updated each time a new version of the control file is written, but this
is a behavior change so no backpatch is done.
Author: Amul Sul
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/CAAJ_b97nd_ghRpyFV9Djf9RLXkoTbOUqnocq11WGq9TisX09Fw@mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
The following improvements are done:
- Addition of type completion for ALTER SEQUENCE AS.
- Ignore ALTER for transforms, as the command is not supported.
- Addition of more completion for ALTER FOREIGN DATA WRAPPER.
- Addition of options related to columns in ALTER VIEW.
This is a continuation of the work done in 0cd6d3b.
Author: Ken Kato
Discussion: https://postgr.es/m/9497ae9ca1b31eb9b1e97aded1c2ab07@oss.nttdata.com
The term "super-exclusive lock" is an acceptable synonym of "cleanup
lock". Even still, switching from one term to the other in the same
file is confusing. Standardize on "cleanup lock" within vacuumlazy.c.
Per a complaint from Andres Freund.
Update vacuumlazy.c file header comments (as well as comments above the
lazy_scan_heap function) that were largely written before the
introduction of the HOT optimization, when lazy_scan_heap did far less,
and didn't actually prune during its initial heap pass.
Since lazy_scan_heap now outsources far more work to lower level
functions, it makes sense to introduce the function by talking about the
high level invariant that dictates the order in which each phase takes
place. Also deemphasize the case where we run out of memory for TIDs,
since delaying that discussion makes it easier to talk about issues of
central importance.
Finally, remove discussion of parallel VACUUM from header comments.
These don't add much, and are in the wrong place.
Surround the contents with a test that the feature is enabled by
configure, to silence header checking tools on systems without GSSAPI
installed.
Backpatch to 12, where the file appeared.
Discussion: https://postgr.es/m/202111161709.u3pbx5lxdimt@alvherre.pgsql
Commit 2fd8685e7f simplified the checking of modified attributes that
takes place within heap_update(). This included a micro-optimization
affecting pages marked PD_PAGE_FULL: don't even try to use HOT to save a
few cycles on determining HOT safety. The assumption was that it won't
work out this time around, since it can't have worked out last time
around.
Remove the micro-optimization. It could only ever save cycles that are
consumed by the vast majority of heap_update() calls, which hardly seems
worth the added complexity. It also seems quite possible that there are
workloads that will do worse over time by repeated application of the
micro-optimization, despite saving some cycles on average, in the short
term.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAH2-WznU1L3+DMPr1F7o2eJBT7=3bAJoY6ZkWABAxNt+-afyTA@mail.gmail.com
In commit ff9f111bce I mixed up inconsistent definitions of the LSN of
the first record in a page, when the previous record ends exactly at the
page boundary. The correct LSN is adjusted to skip the WAL page header;
I failed to use that when setting XLogReaderState->overwrittenRecPtr,
so at WAL replay time VerifyOverwriteContrecord would refuse to let
replay continue past that record.
Backpatch to 10. 9.6 also contains this bug, but it's no longer being
maintained.
Discussion: https://postgr.es/m/45597.1637694259@sss.pgh.pa.us
Commit 6aaaa76bb added support for the GRANTED BY clause in GRANT and
REVOKE statements, but missed adding support for checking the role in
the REVOKE ROLE case. Fix by checking that the parsed role matches the
CURRENT_ROLE/CURRENT_USER requirement, and also add some tests for it.
Backpatch to v14 where GRANTED BY support was introduced.
Discussion: https://postgr.es/m/B7F6699A-A984-4943-B9BF-CEB84C003527@yesql.se
Backpatch-through: 14
Various places wanted to point out that tuple descriptors don't
contain the variable-length fields of pg_attribute. This started when
attacl was added, but more fields have been added since, and these
comments haven't been kept up to date consistently. Reword so that
the purpose is clearer and we don't have to keep updating them.
Inluding <compile.h> and <eval.h> has not been necessary since Python
2.4, since they are included via <Python.h>. Morever, <eval.h> is
being removed in Python 3.11. So remove these includes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/84884.1637723223%40sss.pgh.pa.us
Replica identities that depend directly on an index rely on a set of
properties, one of them being that all the columns defined in this index
have to be marked as NOT NULL. There was a hole in the logic with ALTER
TABLE DROP NOT NULL, where it was possible to remove the NOT NULL
property of a column part of an index used as replica identity, so block
it to avoid problems with logical decoding down the road.
The same check was already done columns part of a primary key, so the
fix is straight-forward.
Author: Haiying Tang, Hou Zhijie
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB6113338C102BEE8B2FFC5BD9FB619@OS0PR01MB6113.jpnprd01.prod.outlook.com
Backpatch-through: 10
The emulation of fstat() in win32stat.c caused two issues with the
existing in-core callers, failing on EINVAL when using a stream as
argument:
- psql's \copy would crash when using a stream.
- pg_recvlogical would fail with -f -.
The tests in copyselect.sql from the main test suite covers the first
case, and there is a TAP test for the second case. However, in both
cases, as the standard streams are always redirected, automated tests
did not notice those issues, requiring a terminal on Windows to be
reproducible.
This issue has been introduced in bed9075, and the origin of the problem
is that GetFileInformationByHandle() does not work directly on streams,
so this commit adds an extra code path to emulate and return a set of
stats that match best with the reality. Note that redirected streams
rely on handles that can be queried with GetFileInformationByHandle(),
but we can rely on GetFinalPathNameByHandleA() to detect this case.
Author: Dmitry Koval, Juan José Santamaría Flecha
Discussion: https://postgr.es/m/17288-6b58a91025a8a8a3@postgresql.org
Backpatch-through: 14
In most places, the variables necessarily store the same value as the
eponymous members of the XLogReaderState that we use during WAL
replay, because ReadRecord() assigns the values from the structure
members to the global variables just after XLogReadRecord() returns.
However, XLogBeginRead() adjusts the structure members but not the
global variables, so after XLogBeginRead() and before the completion
of XLogReadRecord() the values can differ. Otherwise, they must be
identical. According to my analysis, the only place where either
variable is referenced at a point where it might not have the same
value as the structure member is the refrence to EndRecPtr within
XLogPageRead.
Therefore, at every other place where we are using the global
variable, we can just switch to using the structure member instead,
and remove the global variable. However, we can, and in fact should,
do this in XLogPageRead() as well, because at that point in the code,
the global variable will actually store the start of the record we
want to read - either because it's where the last WAL record ended, or
because the read position has been changed using XLogBeginRead since
the last record was read. The structure member, on the other hand,
will already have been updated to point to the end of the record we
just read. Elsewhere, the latter is what we use as an argument to
emode_for_corrupt_record(), so we should do the same here.
This part of the patch is perhaps a bug fix, but I don't think it has
any important consequences, so no back-patch. The point here is just
to continue to whittle down the entirely excessive use of global
variables in xlog.c.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
rescanLatestTimeLine() contains a guard against switching to
a timeline that forked off from the current one prior to the
current recovery point, but that guard does not work if the
timeline switch occurs before the first WAL recod (which must
be the checkpoint record) is read. Without this patch, an
improper timeline switch is therefore possible in such cases.
This happens because rescanLatestTimeLine() relies on the global
variable EndRecPtr to understand the current position of WAL
replay. However, EndRecPtr at this point in the code contains
the endpoint of the last-replayed record, not the startpoint or
endpoint of the record being replayed now. Thus, before any
records have been replayed, it's zero, which causes the sanity
check to always pass.
To fix, pass down the correct timeline explicitly. The
EndRecPtr value we want is the one from the xlogreader, which
will be the starting position of the record we're about to
try to read, rather than the global variable, which is the
ending position of the last record we successfully read.
They're usually the same, but not in the corner case described
here.
No back-patch, because in v14 and earlier branhes, we were using
the wrong TLI here as well as the wrong LSN. In master, that was
fixed by commit 4a92a1c3d1, but
that and it's prerequisite patches are too invasive to
back-patch for such a minor issue.
Patch by me, reviewed by Amul Sul.
Discussion: http://postgr.es/m/CA+Tgmoao96EuNeSPd+hspRKcsCddu=b1h-QNRuKfY8VmfNQdfg@mail.gmail.com
If an error occurs when writing the LZ4 file header, LZ4F_compressEnd()
was called in the error code path of write(), followed by
LZ4F_freeCompressionContext() to finish the cleanup. The code as-is was
not broken, but the LZ4F_compressEnd() proves to not be necessary as
there are no contents to flush at this stage, so remove it.
Per gripe from Jeevan Ladhe and Robert Haas.
Discussion: https://postgr.es/m/CAOgcT0PE33wbD7giAT1OSkNJt=p-vu8huq++qh=ny9O=SCP5aA@mail.gmail.com
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
Same macro names for SnapBuildOnDiskNotChecksummedSize and
SnapBuildOnDiskChecksummedSize are being used in slot.c and snapbuild.c.
This patch renames them, in slot.c, to
ReplicationSlotOnDiskNotChecksummedSize and
ReplicationSlotOnDiskChecksummedSize similar to the other macros. This
makes all macro names look consistent in slot.c.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACVZo-piDGzBOJRY4ob=_goFR6t9DhZMDMjJWN7LQs34Aw@mail.gmail.com
It's possible that a subplan below a Memoize node contains a parameter
from above the Memoize node. If this parameter changes then cache entries
may become out-dated due to the new parameter value.
Previously Memoize was mistakenly not aware of this. We fix this here by
flushing the cache whenever a parameter that's not part of the cache
key changes.
Bug: #17213
Reported by: Elvis Pranskevichus
Author: David Rowley
Discussion: https://postgr.es/m/17213-988ed34b225a2862@postgresql.org
Backpatch-through: 14, where Memoize was added
Memoize would always use the hash equality operator for the cache key
types to determine if the current set of parameters were the same as some
previously cached set. Certain types such as floating points where -0.0
and +0.0 differ in their binary representation but are classed as equal by
the hash equality operator may cause problems as unless the join uses the
same operator it's possible that whichever join operator is being used
would be able to distinguish the two values. In which case we may
accidentally return in the incorrect rows out of the cache.
To fix this here we add a binary mode to Memoize to allow it to the
current set of parameters to previously cached values by comparing
bit-by-bit rather than logically using the hash equality operator. This
binary mode is always used for LATERAL joins and it's used for normal
joins when any of the join operators are not hashable.
Reported-by: Tom Lane
Author: David Rowley
Discussion: https://postgr.es/m/3004308.1632952496@sss.pgh.pa.us
Backpatch-through: 14, where Memoize was added
This commit adds a set of functions able to look at the contents of
various paths related to replication slots:
- pg_ls_logicalsnapdir, for pg_logical/snapshots/
- pg_ls_logicalmapdir, for pg_logical/mappings/
- pg_ls_replslotdir, for pg_replslot/<slot_name>/
These are intended to be used by monitoring tools. Unlike pg_ls_dir(),
execution permission can be granted to non-superusers. Roles members of
pg_monitor gain have access to those functions.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CALj2ACWsfizZjMN6bzzdxOk1ADQQeSw8HhEjhmVXn_Pu+7VzLw@mail.gmail.com
When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
If a table contains a generated column that's preceded by a dropped
column, dumpTableData_insert failed to account for the dropped
column, and would emit DEFAULT placeholder(s) in the wrong column(s).
This resulted in failures at restore time. The default COPY code path
did not have this bug, likely explaining why it wasn't noticed sooner.
While we're fixing this, we can be a little smarter about the
situation: (1) avoid unnecessarily fetching the values of generated
columns, (2) omit generated columns from the output, too, if we're
using --column-inserts. While these modes aren't expected to be
as high-performance as the COPY path, we might as well be as
efficient as we can; it doesn't add much complexity.
Per report from Дмитрий Иванов.
Back-patch to v12 where generated columns came in.
Discussion: https://postgr.es/m/CAPL5KHrkBniyQt5e1rafm5DdXvbgiiqfEQEJ9GjtVzN71Jj5pA@mail.gmail.com
A couple of spots can benefit from an added errdetail(), which matches
what we were already doing in other places; and those that cannot
withstand errdetail() can get a more descriptive primary message.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/CALj2ACV+cX1eM03GfcA=ZMLXh5fSn1X1auJLz3yuS1duPSb9QA@mail.gmail.com
A few strings (one WARNING and some memory context names) in the
autovacuum code were written in a world where "worker" had no other
possible meaning than "autovacuum worker", but that's long time gone.
Be more specific about it.
Also, change the WARNING from elog() to ereport(), to add translability.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CALj2ACX2UHp76dqdoZq92a7v4APFuV5wJQ+AUrb+2HURrKN=NQ@mail.gmail.com
This doesn't belong next to very high level discussion of the tasks that
lazy_scan_heap performs. There is already a similar, longer comment
block at the top of vacuumlazy.c that mentions lazy_scan_heap directly.
Previously it was impossible to terminate these programs via control-C
while they were prompting for a password. We can fix that trivially
for their initial password prompts, by moving setup of the SIGINT
handler from just before to just after their initial GetConnection()
calls.
This fix doesn't permit escaping out of later re-prompts, but those
should be exceedingly rare, since the user's password or the server's
authentication setup would have to have changed meanwhile. We
considered applying a fix similar to commit 46d665bc2, but that
seemed more complicated than it'd be worth. Moreover, this way is
back-patchable, which that wasn't.
The misbehavior exists in all supported versions, so back-patch to all.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
Oversights in commit 405f32fc4.
Also, add a tip (discovered the hard way) about getting Test::More
0.98 to pass its regression tests on recent Linux platforms.
Commit ac9099fc1 rearranged the logic in spgGetCache() that determines
the index's attType (nominal input data type) and leafType (actual
type stored in leaf index tuples). Turns out this broke things for
the case where (a) the actual input data type is different from the
nominal type, (b) the opclass's config function leaves leafType
defaulted, and (c) the opclass has no "compress" function. (b) caused
us to assign the actual input data type as leafType, and then since
that's not attType, we complained that a "compress" function is
required. For non-polymorphic opclasses, condition (a) arises in
binary-compatible cases, such as using SP-GiST text_ops for a varchar
column, or using any opclass on a domain over its nominal input type.
To fix, use attType for leafType when the index's declared column type
is different from but binary-compatible with attType. Do this only in
the defaulted-leafType case, to avoid overriding any explicit
selection made by the opclass.
Per bug #17294 from Ilya Anfimov. Back-patch to v14.
Discussion: https://postgr.es/m/17294-8f6c7962ce877edc@postgresql.org
This fills in the work left un-done by 5f1148224. \prompt can
be canceled out of now, and so can password prompts issued during
\connect. (We don't need to do anything for password prompts
issued during startup, because we aren't yet trapping SIGINT
at that point.)
Nathan Bossart
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
This allows a later commit to reduce the number of branches in performance
sensitive functions during normal running, compared to a very minor saving
during bootstrapping.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAAKRu_Yeg+vh6SHNEo1+=O7e-BPX35cU0XQM=YwQRnkFyv_y+w@mail.gmail.com
While determining xid horizons, we skip over backends that are running
Vacuum. We also ignore Create Index Concurrently, or Reindex Concurrently
for the purposes of computing Xmin for Vacuum. But we were not setting the
flags corresponding to these operations when they are performed in
parallel which was preventing Xid horizon from advancing.
The optimization related to skipping Create Index Concurrently, or Reindex
Concurrently operations was implemented in PG-14 but the fix is the same
for the Parallel Vacuum as well so back-patched till PG-13.
Author: Masahiko Sawada
Reviewed-by: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAD21AoCLQqgM1sXh9BrDFq0uzd3RBFKi=Vfo6cjjKODm0Onr5w@mail.gmail.com
The following improvements are done:
- Addition of some tab completion for CREATE DOMAIN.
- Addition of some tab completion for CREATE TRANSFORM.
- Addition of type completion for CREATE SEQUENCE AS.
Author: Ken Kato
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/8d370135aef066659eef8e8fbfa6315b@oss.nttdata.com
This commit adds to the main regression test suite a table with all
the in-core data types (some exceptions apply). This table is not
dropped, so as pg_upgrade would be able to check the binary
compatibility of the types tracked in the table. If a new type is added
in core, this part of the tests would need a refresh but the tests are
designed to fail if that were to happen.
As this is useful for upgrades and that these rely on the objects
created in the regression test suite of the old version upgraded from,
a backpatch down to 12 is done, which is the last point where a binary
incompatible change has been done (7c15cef). This will hopefully be
enough to find out if something gets broken during the development of a
new version of Postgres, so as it is possible to take actions in
pg_upgrade itself in this case (like 0ccfc28 for sql_identifier).
An area that is not covered yet is related to external modules, which
may create their own types. The testing infrastructure of pg_upgrade is
not integrated yet with the external modules stored in core
(src/test/modules/ or contrib/, all use the same database name for their
tests so there would be an overlap). This could be improved in the
future.
Author: Justin Pryzby
Reviewed-by: Jacob Champion, Peter Eisentraut, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20201206180248.GI24052@telsasoft.com
Backpatch-through: 12
Up to now, you couldn't escape out of psql's \password command
by typing control-C (or other local spelling of SIGINT). This
is pretty user-unfriendly, so improve it. To do so, we have to
modify the functions provided by pg_get_line.c; but we don't
want to mess with psql's SIGINT handler setup, so provide an
API that lets that handler cause the cancel to occur.
This relies on the assumption that we won't do any major harm by
longjmp'ing out of fgets(). While that's obviously a little shaky,
we've long had the same assumption in the main input loop, and few
issues have been reported.
psql has some other simple_prompt() calls that could usefully
be improved the same way; for now, just deal with \password.
Nathan Bossart, minor tweaks by me
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
This fills in some gaps in planner support for starts_with() and
the equivalent ^@ operator:
* A condition such as "textcol ^@ constant" can now use a regular
btree index, not only an SP-GiST index, so long as the index's
collation is C. (This works just like "textcol LIKE 'foo%'".)
* "starts_with(textcol, constant)" can be optimized the same as
"textcol ^@ constant".
* Fixed-prefix LIKE and regex patterns are now more like starts_with()
in another way: if you apply one to an SPGiST-indexed column, you'll
get an index condition using ^@ rather than two index conditions with
>= and <.
Per a complaint from Shay Rojansky. Patch by me; thanks to
Nathan Bossart for review.
Discussion: https://postgr.es/m/232599.1633800229@sss.pgh.pa.us
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
If a SQL-standard function body contains an INSERT ... SELECT statement,
any function parameters referenced within the SELECT were always printed
in $N style, rather than using the parameter name if any. While not
strictly incorrect, this wasn't the intention, and it's inconsistent
with the way that such parameters would be printed in any other kind
of statement.
The cause is that the recursion to get_query_def from
get_insert_query_def neglected to pass down the context->namespaces
list, passing constant NIL instead. This is a very ancient oversight,
but AFAICT it had no visible consequences before commit e717a9a18
added an outermost namespace with function parameters. We don't allow
INSERT ... SELECT as a sub-query, except in a top-level WITH clause,
where it couldn't contain any outer references that might need to access
upper namespaces. So although that's arguably a bug, I don't see any
point in changing it before v14.
In passing, harden the code added to get_parameter by e717a9a18 so that
it won't crash if a PARAM_EXTERN Param appears in an unexpected place.
Per report from Erki Eessaar. Code fix by me, regression test case
by Masahiko Sawada.
Discussion: https://postgr.es/m/AM9PR01MB8268347BED344848555167FAFE949@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
Commit 81d5995b4b introduced more fine-grained errormessages for
incorrect relkinds for publication, while unlogged and temporary
tables were reported with using the same message. This provides
separate error messages for these types of relpersistence.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALj2ACW9S=AswyQHjtO6WMcsergMkCBTtzXGrM8DX26DzfeTLQ@mail.gmail.com
At present, there is an undocumented coding rule that you must call
RecoveryInProgress(), or do something else that results in a call
to InitXLogInsert(), before trying to write WAL. Otherwise, the
WAL construction buffers won't be initialized, resulting in
failures.
Since it's not good to rely on a status inquiry function like
RecoveryInProgress() having the side effect of initializing
critical data structures, instead do the initialization eariler,
when the backend first starts up.
Patch by me. Reviewed by Nathan Bossart and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
Add a comment explaining why the pgstats accounting used during
opportunistic heap pruning operations (to maintain the current number of
dead tuples in the relation) needs to compensate by subtracting away the
number of new LP_DEAD items. This is needed so it can avoid completely
forgetting about tuples that become LP_DEAD items during pruning -- they
should still count.
It seems more natural to discuss this issue at the only relevant call
site (opportunistic pruning), since the same issue does not apply to the
only other caller (the VACUUM call site). Move everything there too.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzm7f+A6ej650gi_ifTgbhsadVW5cujAL3punpupHff5Yg@mail.gmail.com
Commit 90627cf98 added support for retaining the data directory even on
successful tests, but failed to document the environment variable which
controls retention. This adds a small note to the TAP test README about
PG_TEST_NOCLEAN which when set skips removing the data directories from
successful tests.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2B02C1B3-3F41-4E14-92B9-005D83623A0B@yesql.se
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
It is up to the heap_page_prune() caller to decide what to do about
updating the FSM for a page following pruning. Update old comments that
address what we might want to do as if it was the responsibility of
heap_page_prune() itself. heap_page_prune() doesn't have enough
high-level context to make a sensible choice.
Presently, the archive_status directory was scanned for each file to
archive. When there are many status files, say because archive_command
has been failing for a long time, these directory scans can get very
slow. With this change, the archiver remembers several files to archive
during each directory scan, speeding things up.
To ensure timeline history files are archived as quickly as possible,
XLogArchiveNotify() forces the archiver to do a new directory scan as
soon as the .ready file for one is created.
Nathan Bossart, per a long discussion involving many people. It is
not clear to me exactly who out of all those people reviewed this
particular patch.
Discussion: http://postgr.es/m/CA+TgmobhAbs2yabTuTRkJTq_kkC80-+jw=pfpypdOJ7+gAbQbw@mail.gmail.com
Discussion: http://postgr.es/m/620F3CE1-0255-4D66-9D87-0EADE866985A@amazon.com
It's a coin toss which of these is a better default assumption.
However, of the machines we have in the buildfarm, the only ones
relying on the fallback socklen_t definition are ancient HPUX,
and on that platform unsigned int is the right choice. Minor
tweak to ee3a1a5b6.
Discussion: https://postgr.es/m/1440792.1636558888@sss.pgh.pa.us
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
Commit 5a1007a508 tried to introduce
an assertion that the block size was at least twice the size of a
tar block, but I got the math wrong. My error was reported to me
off-list.
In XLogCtlData, rename the structure member ThisTimeLineID to
InsertTimeLineID and update the comments to make clear that it's only
expected to be set after recovery is complete.
In StartupXLOG, replace the local variables ThisTimeLineID and
PrevTimeLineID with new local variables replayTLI and newTLI. In the
old scheme, ThisTimeLineID was the replay TLI until we created a new
timeline, and after that the replay TLI was in PrevTimeLineID. Now,
replayTLI is the TLI from which we last replayed WAL throughout the
entire function, and newTLI is either that, or the new timeline created
upon promotion.
Remove some misleading comments from the comment block just above where
recoveryTargetTimeLineGoal and friends are declared. It's become
incorrect, not only because ThisTimeLineID as a variable is now gone,
but also because the rmgr code does not care about ThisTimeLineID and
has not since what used to be the TLI field in the page header was
repurposed to store the page checksum.
Add a comment GetFlushRecPtr that it's only supposed to be used in
normal running, and an assertion to verify that this is so.
Per some ideas from Michael Paquier and some of my own. Review by
Michael Paquier also.
Discussion: http://postgr.es/m/CA+TgmoY1a2d1AnVR3tJcKmGGkhj7GGrwiNwjtKr21dxOuLBzCQ@mail.gmail.com
A couple of code paths related to logical decoding (WAL sender, slot
advancing, etc.) use XLogReadRecord(), feeding on error messages
generated by walreader.c on a failure. All those messages have no
context, making it harder to spot from where an error could come even if
these should not happen. All the other callers of XLogReadRecord() do
that already.
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/YYnTH6OyOwQcAdkw@paquier.xyz
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
Earlier versions of PostgreSQL featured a version of pg_basebackup
that wanted to edit tar archives but was too dumb to parse them
properly. The server made things easier for the client by failing
to add the two blocks of zero bytes that ought to end a tar file,
leaving it up to the client to do that.
But since commit 23a1c6578c, we
don't need this hack any more, because pg_basebackup is now smarter
and can parse tar files even if they are properly terminated! So
change the server to always properly terminate the tar files. Older
versions of pg_basebackup can't talk to new servers anyway, so
there's no compatibility break.
On the pg_basebackup side, we see still need to add the terminating
zero bytes if we're talking to an older server, but not when the
server is v15+. Hopefully at some point we'll be able to remove
some of this compatibility cruft, but it seems best to hang on to
it for now.
In passing, add a file header comment to bbstreamer_tar.c, to make
it clearer what's going on here.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
Commit 5a2832465f introduced some enums to represent all tables in schema
publications and used REL in their names. Use TABLE instead of REL in
those enums to avoid confusion with other objects like SEQUENCES that can
be part of a publication in the future.
In the passing, (a) Change one of the newly introduced error messages to
make it consistent for Create and Alter commands, (b) add missing alias in
one of the SQL Statements that is used to print publications associated
with the table.
Reported-by: Tomas Vondra, Peter Smith
Author: Vignesh C
Reviewed-by: Hou Zhijie, Peter Smith
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ%40mail.gmail.com
Commit 23a1c6578c improved
pg_basebackup's ability to parse tar archives, but also arranged
to parse them only when we need to make some modification to the
contents of the archive. That's a problem, because the server
doesn't actually terminate tar archives. When the new parsing
logic was engaged, pg_basebackup would properly terminate the
tar file, but when it was skipped, pg_basebackup would just write
whatever it got from the server, meaning that the terminator
was missing.
Most versions of tar are willing to overlook the missing terminator, but
the AIX buildfarm animals were not. Fix by inventing a new kind of
bbstreamer that just blindly adds a terminator, and using it whenever we
don't parse the tar archive.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
In v14, because we don't have a field in RestrictInfo to cache both the
left and right type's hash equality operator, we just restrict the scope
of Memoize to only when the left and right types of a RestrictInfo are the
same.
In master we add another field to RestrictInfo and cache both hash
equality operators.
Reported-by: Jaime Casanova
Author: David Rowley
Discussion: https://postgr.es/m/20210929185544.GB24346%40ahch-to
Backpatch-through: 14
Quite a few buildfarm animals are warning about this, and lapwing
is actually failing (because -Werror). It's a false positive AFAICS,
so no need to do more than zero the variable to start with.
Discussion: https://postgr.es/m/YYXJnUxgw9dZKxlX@paquier.xyz
Re-ordering the #include's is a bit problematic here because
libpq/libpq-be.h needs to include <openssl/ssl.h>. Instead,
let's #undef the unwanted macro after all the #includes.
This is definitely uglier than the other way, but it should
work despite possible future header rearrangements.
(A look at the openssl headers indicates that X509_NAME is the
only conflicting symbol that we use.)
In passing, remove a related but long-incorrect comment in
pg_backup_archiver.h.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Since 8162464a25 we do so in win32_port.h. But it likely didn't do much
before that either, because at that point windows.h was already included via
win32_port.h.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/612842.1636237461@sss.pgh.pa.us
Commit db7d1a7b0 pulled out Mkvcbuild.pm's custom support for building
contrib/pgcrypto, but neglected to inform it that that module can now
be built normally. Or at least I guess it can now be built normally.
But this is definitely causing bowerbird to fail, since it's trying to
test a module it hasn't built.
The tsvector data type has always forbidden lexemes to be empty.
However, array_to_tsvector() didn't get that memo, and would
allow an empty-string array element to become an empty lexeme.
This could result in dump/restore failures later, not to mention
whatever semantic issues might be behind the original prohibition.
However, other functions that take a plain text input directly as
a lexeme value do not need a similar restriction, because they only
match the string against existing tsvector entries. In particular
it'd be a bad idea to make ts_delete() reject empty strings, since
that is the most convenient way to clean up any bad data that might
have gotten into a tsvector column via this bug.
Reflecting on that, let's also remove the prohibition against NULL
array elements in tsvector_delete_arr and tsvector_setweight_by_filter.
It seems more consistent to ignore them, as an empty-string element
would be ignored.
There's a case for back-patching this, since it's clearly a bug fix.
On balance though, it doesn't seem like something to change in a
minor release.
Jean-Christophe Arnu
Discussion: https://postgr.es/m/CAHZmTm1YVndPgUVRoag2WL0w900XcoiivDDj-gTTYBsG25c65A@mail.gmail.com
After further investigation, it seems the cause of the problem
is our recent decision to start defining WIN32_LEAN_AND_MEAN.
That causes <windows.h> to no longer include <wincrypt.h>, which
means that the OpenSSL headers are unable to prevent conflicts
with that header by #undef'ing the conflicting macros. Apparently,
some other system header that be-secure-openssl.c #includes after
the OpenSSL headers is pulling in <wincrypt.h>. It's obscure just
where that happens and why we're not seeing it on other Windows
buildfarm animals. However, it should work to move the OpenSSL
#includes to the end of the list. For the sake of future-proofing,
do likewise in fe-secure-openssl.c. In passing, remove useless
double inclusions of <openssl/ssl.h>.
Thanks to Thomas Munro for running down the relevant information.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
Commit 23a1c6578 thought it'd be cute to refactor
pg_basebackup/Makefile with a new variable BBOBJS,
but our MSVC build system knows nothing of that.
Per buildfarm.
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
Add new comments that spell out what VACUUM expects from heap pruning:
pruning must never leave behind DEAD tuples that still have tuple
storage. This has at least been the case since commit 8523492d, which
established the principle that vacuumlazy.c doesn't have to deal with
DEAD tuples that still have tuple storage directly, except perhaps by
simply retrying pruning (to handle a rare corner case involving
concurrent transaction abort).
In passing, update some references to old symbol names that were missed
by the snapshot scalability work (specifically commit dc7420c2c9).
StartupXLOG() still has ThisTimeLineID as a local variable, but the
remaining code in xlog.c now needs to the relevant TimeLineID by some
other means. Mostly, this means that we now pass it as a function
parameter to a bunch of functions where we didn't previously.
However, a few cases require special handling:
- In functions that might be called by outside callers who
wouldn't necessarily know what timeline to specify, we get
the timeline ID from shared memory. XLogCtl->ThisTimeLineID
can be used in most cases since recovery is known to have
completed by the time those functions are called. In
xlog_redo(), we can use XLogCtl->replayEndTLI.
- XLogFileClose() needs to know the TLI of the open logfile.
Do that with a new global variable openLogTLI. While
someone could argue that this is just trading one global
variable for another, the new one has a far more narrow
purposes and is referenced in just a few places.
- read_backup_label() now returns the TLI that it obtains
by parsing the backup_label file. Previously, ReadRecord()
could be called to parse the checkpoint record without
ThisTimeLineID having been initialized. Now, the timeline
is passed down, and I didn't want to pass an uninitialized
variable; this change lets us avoid that. The old coding
didn't seem to have any practical consequences that we need
to worry about, but this is cleaner.
- In BootstrapXLOG(), it's just a constant.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
All such code deals with this global variable in one of three ways.
Sometimes the same functions use it in more than one of these ways
at the same time.
First, sometimes it's an implicit argument to one or more functions
being called in xlog.c or elsewhere, and must be set to the
appropriate value before calling those functions lest they
misbehave. In those cases, it is now passed as an explicit argument
instead.
Second, sometimes it's used to obtain the current timeline after
the end of recovery, i.e. the timeline to which WAL is being
written and flushed. Such code now calls GetWALInsertionTimeLine()
or relies on the new out parameter added to GetFlushRecPtr().
Third, sometimes it's used during recovery to store the current
replay timeline. That can change, so such code must generally
update the value before each use. It can still do that, but must
now use a local variable instead.
The net effect of these changes is to reduce by a fair amount the
amount of code that is directly accessing this global variable.
That's good, because history has shown that we don't always think
clearly about which timeline ID it's supposed to contain at any
given point in time, or indeed, whether it has been or needs to
be initialized at any given point in the code.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
In slotfuncs.c, pg_replication_slot_advance() needs to determine
the LSN up to which the slot should be advanced, but that doesn't
require us to update ThisTimeLineID, because none of the code called
from here depends on it. If the replication slot is logical,
pg_logical_replication_slot_advance will call read_local_xlog_page,
which does use ThisTimeLineID, but also takes care of making sure
it's up to date. If the replication slot is physical, the timeline
isn't used for anything at all.
In logicalfuncs.c, pg_logical_slot_get_changes_guts() has the same
issue: the only code we're going to run that cares about timelines
is in or downstream of read_local_xlog_page, which already makes
sure that the correct value gets set. Hence, don't do it here.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
Amit Kapila
Michael Paquier
Andrew Dunstan
Tom Lane
Peter Eisentraut
Daniel Gustafsson
Peter Geoghegan
Tomas Vondra
Alvaro Herrera
Andres Freund
Robert Haas
David Rowley
Fujii Masao
Noah Misch
Jeff Davis
Alexander Korotkov