The original patch kind of ignored the fact that we were doing something
different from a costing point of view, but nobody noticed. This patch
fixes that oversight.
David Rowley
Per discussion, this gives potential users of the hook more flexibility,
because they can build custom Paths that implement only one stage of
upper processing atop core-provided Paths for earlier stages.
Extracted from pending unique-join patch, since this is a rather large
delta but it's simply moving code out into separately-accessible
subroutines.
I (tgl) did choose to add a bit more logic to rel_supports_distinctness,
so that it verifies that there's at least one potentially usable unique
index rather than just checking indexlist != NIL. Otherwise there's
no functional change here.
David Rowley
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
Per discussion, the new extensible node framework is thought to be
better designed than the custom path/scan/scanstate stuff we added
in PostgreSQL 9.5. Rework the latter to be more like the former.
This is not backward-compatible, but we generally don't promise that
for C APIs, and there probably aren't many people using this yet
anyway.
KaiGai Kohei, reviewed by Petr Jelinek and me. Some further
cosmetic changes by me.
cost_subplan() supposed that the given subplan must have plan_rows > 0,
which as far as I can tell was true until recent refactoring of the
code in createplan.c; but now that code allows the Result for a provably
empty subquery to have plan_rows = 0. Rather than undo that change,
put in a clamp to prevent zero divide.
get_cheapest_fractional_path() likewise supposed that best_path->rows > 0.
This assumption has been wrong for longer. It's actually harmless given
IEEE float math, because a positive value divided by zero gives +Infinity
and compare_fractional_path_costs() will do the right thing with that.
Still, best not to assume that.
final_cost_nestloop() also seems to have some risks in this area, so
borrow the clamping logic already present in the mergejoin cost functions.
Lastly, remove unnecessary clamp_row_est() in planner.c's calls to
get_number_of_groups(). The only thing that function does with path_rows
is pass it to estimate_num_groups() which already has an internal clamp,
so we don't need the extra call; and if we did, the callers are arguably
the wrong place for it anyway.
First two items reported by Piotr Stefaniak, the others are products
of my nosing around for similar problems. No back-patch since there's
no evidence that problems arise in the back branches.
In commit 9118d03a8c we taught the planner to postpone evaluation of
set-returning functions in a SELECT's targetlist until after any sort done
to satisfy ORDER BY. However, if we postpone some SRFs this way while
others do not get postponed (because they're sort or group key columns)
we will break the traditional behavior by which all SRFs in the tlist run
in-step during ExecTargetList(), so that you get the least common multiple
of their periods not the product. Fix make_sort_input_target() so it will
not split up SRF evaluation in such cases.
There is still a hazard of similar odd behavior if there's a SRF in a
grouping column and another one that isn't, but that was true before
and we're just trying to preserve bug-compatibility with the traditional
behavior. This whole area is overdue to be rethought and reimplemented,
but we'll try to avoid changing behavior until then.
Per report from Regina Obe.
Parallel workers can now partially aggregate the data and pass the
transition values back to the leader, which can combine the partial
results to produce the final answer.
David Rowley, based on earlier work by Haribabu Kommi. Reviewed by
Álvaro Herrera, Tomas Vondra, Amit Kapila, James Sewell, and me.
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
This means that, for example, "SELECT expensive_func(a) FROM bigtab
WHERE something" can compute expensive_func(a) in the workers rather
than the leader if it happens to be parallel-safe, which figures to be
a big win in some practical cases.
Currently, we can only do this if the entire target list is
parallel-safe. If we worked harder, we might be able to evaluate
parallel-safe targets in the worker and any parallel-restricted
targets in the leader, but that would be more complicated, and there
aren't that many parallel-restricted functions that people are likely
to use in queries anyway. I think. So just do the simple thing for
the moment.
Robert Haas, Amit Kapila, and Tom Lane
This is basically like the just-added create_upper_paths_hook, but
control is funneled only to the FDW responsible for all the baserels
of the current query; so providing such a callback is much less likely
to add useless overhead than using the hook function is.
The documentation is a bit sketchy. We'll likely want to improve it,
and/or adjust the call conventions, when we get some experience with
actually using this callback. Hopefully somebody will find time to
experiment with it before 9.6 feature freeze.
In the initial revision of the upper-planner pathification work, the only
available way for an FDW or custom-scan provider to inject Paths
representing post-scan-join processing was to insert them during scan-level
GetForeignPaths or similar processing. While that's not impossible, it'd
require quite a lot of duplicative processing to look forward and see if
the extension would be capable of implementing the whole query. To improve
matters for custom-scan providers, provide a hook function at the point
where the core code is about to start filling in upperrel Paths. At this
point Paths are available for the whole scan/join tree, which should reduce
the amount of redundant effort considerably.
(An alternative design that was suggested was to provide a separate hook
for each post-scan-join processing step, but that seems messy and not
clearly more useful.)
Following our time-honored tradition, there's no documentation for this
hook outside the source code.
As-is, this hook is only meant for custom scan providers, which we can't
assume very much about. A followon patch will implement an FDW callback
to let FDWs do the same thing in a somewhat more structured fashion.
In commit 19a541143a I did not make PathTarget a subtype of Node,
and embedded a RelOptInfo's reltarget directly into it rather than having
a separately-allocated Node. In hindsight that was misguided
micro-optimization, enabled by the fact that at that point we didn't have
any Paths with custom PathTargets. Now that PathTarget processing has
been fleshed out some more, it's easier to see that it's better to have
PathTarget as an indepedent Node type, even if it does cost us one more
palloc to create a RelOptInfo. So change it while we still can.
This commit just changes the representation, without doing anything more
interesting than that.
CitusDB is using these and don't wish to redesign their code right now.
I am not on board with this being a good idea, or a good precedent,
but I lack the energy to fight about it.
It is frequently useful for volatile, set-returning, or expensive functions
in a SELECT's targetlist to be postponed till after ORDER BY and LIMIT are
done. Otherwise, the functions might be executed for every row of the
table despite the presence of LIMIT, and/or be executed in an unexpected
order. For example, in
SELECT x, nextval('seq') FROM tab ORDER BY x LIMIT 10;
it's probably desirable that the nextval() values are ordered the same
as x, and that nextval() is not run more than 10 times.
In the past, Postgres was inconsistent in this area: you would get the
desirable behavior if the ordering were performed via an indexscan, but
not if it had to be done by an explicit sort step. Getting the desired
behavior reliably required contortions like
SELECT x, nextval('seq')
FROM (SELECT x FROM tab ORDER BY x) ss LIMIT 10;
This patch conditionally postpones evaluation of pure-output target
expressions (that is, those that are not used as DISTINCT, ORDER BY, or
GROUP BY columns) so that they effectively occur after sorting, even if an
explicit sort step is necessary. Volatile expressions and set-returning
expressions are always postponed, so as to provide consistent semantics.
Expensive expressions (costing more than 10 times typical operator cost,
which by default would include any user-defined function) are postponed
if there is a LIMIT or if there are expressions that must be postponed.
We could be more aggressive and postpone any nontrivial expression, but
there are costs associated with doing so: it requires an extra Result plan
node which adds some overhead, and postponement changes the volume of data
going through the sort step, perhaps for the worse. Since we tend not to
have very good estimates of the output width of nontrivial expressions,
it's hard to have much confidence in our ability to predict whether
postponement would increase or decrease the cost of the sort; therefore
this patch doesn't attempt to make decisions conditionally on that.
Between these factors and a general desire not to change query behavior
when there's not a demonstrable benefit, it seems best to be conservative
about applying postponement. We might tweak the decision rules in the
future, though.
Konstantin Knizhnik, heavily rewritten by me
Teach make_group_input_target() and make_window_input_target() to work
entirely with the PathTarget representation of tlists, rather than
constructing a tlist and immediately deconstructing it into PathTarget
format. In itself this only saves a few palloc's; the bigger picture is
that it opens the door for sharing cost_qual_eval work across all of
planner.c's constructions of PathTargets. I'll come back to that later.
In support of this, flesh out tlist.c's infrastructure for PathTargets
a bit more.
All along, this function should have treated WindowFuncs in a manner
similar to Aggrefs, ie with an option whether or not to recurse into them.
By not considering the case, it was always recursing, which is OK for most
callers (although I suspect that the case in prepare_sort_from_pathkeys
might represent a bug). But now we need return-without-recursing behavior
as well. There are also more than a few callers that should never see a
WindowFunc, and now we'll get some error checking on that.
In commit 1d97c19a0f and later c1d9579dd8, we extended
pull_var_clause's API by adding enum-type arguments. That's sort of a pain
to maintain, though, because it means every time we add a new behavior we
must touch every last one of the call sites, even if there's a reasonable
default behavior that most of them could use. Let's switch over to using a
bitmask of flags, instead; that seems more maintainable and might save a
nanosecond or two as well. This commit changes no behavior in itself,
though I'm going to follow it up with one that does add a new behavior.
In passing, remove flatten_tlist(), which has not been used since 9.1
and would otherwise need the same API changes.
Removing these enums means that optimizer/tlist.h no longer needs to
depend on optimizer/var.h. Changing that caused a number of C files to
need addition of #include "optimizer/var.h" (probably we can thank old
runs of pgrminclude for that); but on balance it seems like a good change
anyway.
This function is written as though Gather doesn't project; but it does.
Even if it did not project, though, we must use build_path_tlist to ensure
that the output columns receive correct sortgroupref labeling.
Per report from Amit Kapila.
Refactor so that the internal APIs in planner.c deal in PathTargets not
targetlists, and establish a more regular structure for deriving the
targets needed for successive steps.
There is more that could be done here; calculating the eval costs of each
successive target independently is both inefficient and wrong in detail,
since we won't actually recompute values available from the input node's
tlist. But it's no worse than what happened before the pathification
rewrite. In any case this seems like a good starting point for considering
how to handle Konstantin Knizhnik's function-evaluation-postponement patch.
Instead of having planner.c compute a groupColIdx array and store it in
GroupingSetsPaths, make create_groupingsets_plan() find the grouping
columns by searching in the child plan node's tlist. Although that's
probably a bit slower for create_groupingsets_plan(), it's more like
the way every other plan node type does this, and it provides positive
confirmation that we know which child output columns we're supposed to be
grouping on. (Indeed, looking at this now, I'm not at all sure that it
wasn't broken before, because create_groupingsets_plan() isn't demanding
an exact tlist match from its child node.) Also, this allows substantial
simplification in planner.c, because it no longer needs to compute the
groupColIdx array at all; no other cases were using it.
I'd intended to put off this refactoring until later (like 9.7), but
in view of the likely bug fix and the need to rationalize planner.c's
tlist handling so we can do something sane with Konstantin Knizhnik's
function-evaluation-postponement patch, I think it can't wait.
I passed the wrong "root" struct to create_pathtarget in build_minmax_path.
Since the subroot is a clone of the outer root, this would not cause any
serious problems, but it would waste some cycles because
set_pathtarget_cost_width would not have access to Var width estimates
set up while running query_planner on the subroot.
This patch removes some redundant cost calculations that I left for later
cleanup in commit 3fc6e2d7f5. There's now a uniform policy that the
make_foo() convenience functions don't do any cost calculations. Most of
their callers copy costs from the source Path node, and for those that
don't, the calculation in the make_foo() function wasn't necessarily right
anyhow. (make_result() was particularly a mess, as it was serving multiple
callers using cost calcs designed for only the first one or two that had
ever existed.) Aside from saving a few cycles, this ensures that what
EXPLAIN prints matches the costs we used for planning purposes. It does
not change any planner decisions, since the decisions are already made.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
If a GROUP BY clause includes all columns of a non-deferred primary key,
as well as other columns of the same relation, those other columns are
redundant and can be dropped from the grouping; the pkey is enough to
ensure that each row of the table corresponds to a separate group.
Getting rid of the excess columns will reduce the cost of the sorting or
hashing needed to implement GROUP BY, and can indeed remove the need for
a sort step altogether.
This seems worth testing for since many query authors are not aware of
the GROUP-BY-primary-key exception to the rule about queries not being
allowed to reference non-grouped-by columns in their targetlists or
HAVING clauses. Thus, redundant GROUP BY items are not uncommon. Also,
we can make the test pretty cheap in most queries where it won't help
by not looking up a rel's primary key until we've found that at least
two of its columns are in GROUP BY.
David Rowley, reviewed by Julien Rouhaud
In 61444bfb we started to allow HAVING clauses to be fully pushed down
into WHERE, even when grouping sets are in use. That turns out not to
work correctly, because grouping sets can "produce" NULLs, meaning that
filtering in WHERE and HAVING can have different results, even when no
aggregates or volatile functions are involved.
Instead only allow pushdown of empty grouping sets.
It'd be nice to do better, but the exact mechanics of deciding which
cases are safe are still being debated. It's important to give correct
results till we find a good solution, and such a solution might not be
appropriate for backpatching anyway.
Bug: #13863
Reported-By: 'wrb'
Diagnosed-By: Dean Rasheed
Author: Andrew Gierth
Reviewed-By: Dean Rasheed and Andres Freund
Discussion: 20160113183558.12989.56904@wrigleys.postgresql.org
Backpatch: 9.5, where grouping sets were introduced
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
create_foreignscan_plan needs to know whether any system columns are
requested from a relation (this flag is needed by ForeignNext during
execution). However, for join relations this is a pointless test,
because it's not possible to request system columns from them, so
remove the check.
Author: Etsuro Fujita
Discussion: http://www.postgresql.org/message-id/56AA0FC5.9000207@lab.ntt.co.jp
Reviewed-by: David Rowley, Robert Haas
Previously, the foreign join pushdown infrastructure left the question
of security entirely up to individual FDWs, but it would be easy for
a foreign data wrapper to inadvertently open up subtle security holes
that way. So, make it the core code's job to determine which user
mapping OID is relevant, and don't attempt join pushdown unless it's
the same for all relevant relations.
Per a suggestion from Tom Lane. Shigeru Hanada and Ashutosh Bapat,
reviewed by Etsuro Fujita and KaiGai Kohei, with some further
changes by me.
The core innovation of this patch is the introduction of the concept
of a partial path; that is, a path which if executed in parallel will
generate a subset of the output rows in each process. Gathering a
partial path produces an ordinary (complete) path. This allows us to
generate paths for parallel joins by joining a partial path for one
side (which at the baserel level is currently always a Partial Seq
Scan) to an ordinary path on the other side. This is subject to
various restrictions at present, especially that this strategy seems
unlikely to be sensible for merge joins, so only nested loops and
hash joins paths are generated.
This also allows an Append node to be pushed below a Gather node in
the case of a partitioned table.
Testing revealed that early versions of this patch made poor decisions
in some cases, which turned out to be caused by the fact that the
original cost model for Parallel Seq Scan wasn't very good. So this
patch tries to make some modest improvements in that area.
There is much more to be done in the area of generating good parallel
plans in all cases, but this seems like a useful step forward.
Patch by me, reviewed by Dilip Kumar and Amit Kapila.
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
There's no good reason for stomping on the input data; it makes the logic
in this function no simpler, in fact probably the reverse. And it makes
it impossible to separate path generation from plan generation, as I'm
working towards doing; that will require more than one traversal of these
lists.
Improve comments and make it a shade less messy. I think we might want
to move all of this somewhere else later, but it needs to be more
readable first.
In passing, re-pgindent the file, affecting some recently-added comments
concerning parallel query planning.
Once upon a time it was necessary for grouping_planner() to determine
the tlist it wanted from the scan/join plan subtree before it called
query_planner(), because query_planner() would actually make a Plan using
that. But we refactored things a long time ago to delay construction of
the Plan tree till later, so there's no need to build that tlist until
(and indeed unless) we're ready to plaster it onto the Plan. The only
thing query_planner() cares about is what Vars are going to be needed for
the tlist, and it can perfectly well get that by looking at the real tlist
rather than some masticated version.
Well, actually, there is one minor glitch in that argument, which is that
make_subplanTargetList also adds Vars appearing only in HAVING to the
tlist it produces. So now we have to account for HAVING explicitly in
build_base_rel_tlists. But that just adds a few lines of code, and
I doubt it moves the needle much on processing time; we might be doing
pull_var_clause() twice on the havingQual, but before we had it scanning
dummy tlist entries instead.
This is a very small down payment on rationalizing grouping_planner
enough so it can be refactored.
This should have been part of the original commit, but was missed.
Pushing data between processes is expensive, so we definitely want
to project away unneeded columns here, just as we do for other nodes
like Sort and Hash that care about the volume of data.
We carry around information about if a given query has row security or
not to allow the plancache to use that information to invalidate a
planned query in the event that the environment changes.
Previously, the flag of one of the subqueries was simply being copied
into place to indicate if the query overall included RLS components.
That's wrong as we need the global OR of all subqueries. Fix by
changing the code to match how fireRIRules works, which is results
in OR'ing all of the flags.
Noted by Tom.
Back-patch to 9.5 where RLS was introduced.
I originally modeled this data structure on SpecialJoinInfo, but after
commit acfcd45cac that looks like a pretty poor decision.
All we really need is relid sets identifying laterally-referenced rels;
and most of the time, what we want to know about includes indirect lateral
references, a case the LateralJoinInfo data was unsuited to compute with
any efficiency. The previous commit redefined RelOptInfo.lateral_relids
as the transitive closure of lateral references, so that it easily supports
checking indirect references. For the places where we really do want just
direct references, add a new RelOptInfo field direct_lateral_relids, which
is easily set up as a copy of lateral_relids before we perform the
transitive closure calculation. Then we can just drop lateral_info_list
and LateralJoinInfo and the supporting code. This makes the planner's
handling of lateral references noticeably more efficient, and shorter too.
Such a change can't be back-patched into stable branches for fear of
breaking extensions that might be looking at the planner's data structures;
but it seems not too late to push it into 9.5, so I've done so.
More fuzz testing by Andreas Seltenreich exposed that the planner did not
cope well with chains of lateral references. If relation X references Y
laterally, and Y references Z laterally, then we will have to scan X on the
inside of a nestloop with Z, so for all intents and purposes X is laterally
dependent on Z too. The planner did not understand this and would generate
intermediate joins that could not be used. While that was usually harmless
except for wasting some planning cycles, under the right circumstances it
would lead to "failed to build any N-way joins" or "could not devise a
query plan" planner failures.
To fix that, convert the existing per-relation lateral_relids and
lateral_referencers relid sets into their transitive closures; that is,
they now show all relations on which a rel is directly or indirectly
laterally dependent. This not only fixes the chained-reference problem
but allows some of the relevant tests to be made substantially simpler
and faster, since they can be reduced to simple bitmap manipulations
instead of searches of the LateralJoinInfo list.
Also, when a PlaceHolderVar that is due to be evaluated at a join contains
lateral references, we should treat those references as indirect lateral
dependencies of each of the join's base relations. This prevents us from
trying to join any individual base relations to the lateral reference
source before the join is formed, which again cannot work.
Andreas' testing also exposed another oversight in the "dangerous
PlaceHolderVar" test added in commit 85e5e222b1. Simply rejecting
unsafe join paths in joinpath.c is insufficient, because in some cases
we will end up rejecting *all* possible paths for a particular join, again
leading to "could not devise a query plan" failures. The restriction has
to be known also to join_is_legal and its cohort functions, so that they
will not select a join for which that will happen. I chose to move the
supporting logic into joinrels.c where the latter functions are.
Back-patch to 9.3 where LATERAL support was introduced.
Commit e7cb7ee145 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
Add a new flag, consider_parallel, to each RelOptInfo, indicating
whether a plan for that relation could conceivably be run inside of
a parallel worker. Right now, we're pretty conservative: for example,
it might be possible to defer applying a parallel-restricted qual
in a worker, and later do it in the leader, but right now we just
don't try to parallelize access to that relation. That's probably
the right decision in most cases, anyway.
Using the new flag, generate parallel sequential scan plans for plain
baserels, meaning that we now have parallel sequential scan in
PostgreSQL. The logic here is pretty unsophisticated right now: the
costing model probably isn't right in detail, and we can't push joins
beneath Gather nodes, so the number of plans that can actually benefit
from this is pretty limited right now. Lots more work is needed.
Nevertheless, it seems time to enable this functionality so that all
this code can actually be tested easily by users and developers.
Note that, if you wish to test this functionality, it will be
necessary to set max_parallel_degree to a value greater than the
default of 0. Once a few more loose ends have been tidied up here, we
might want to consider changing the default value of this GUC, but
I'm leaving it alone for now.
Along the way, fix a bug in cost_gather: the previous coding thought
that a Gather node's transfer overhead should be costed on the basis of
the relation size rather than the number of tuples that actually need
to be passed off to the leader.
Patch by me, reviewed in earlier versions by Amit Kapila.
In addition, this path fills in a number of missing bits and pieces in
the parallel infrastructure. Paths and plans now have a parallel_aware
flag indicating whether whatever parallel-aware logic they have should
be engaged. It is believed that we will need this flag for a number of
path/plan types, not just sequential scans, which is why the flag is
generic rather than part of the SeqScan structures specifically.
Also, execParallel.c now gives parallel nodes a chance to initialize
their PlanState nodes from the DSM during parallel worker startup.
Amit Kapila, with a fair amount of adjustment by me. Review of previous
patch versions by Haribabu Kommi and others.
The original Gather code failed to mark a Gather node as not able to
do projection, but it couldn't, even though it did call initialize its
projection info via ExecAssignProjectionInfo. There doesn't seem to
be any good reason for this node not to have projection capability,
so clean things up so that it does. Without this, plans using Gather
nodes might need to carry extra Result nodes to do projection.
In order for this to be safe, the code which hands true serializability
will need to taught that the SIRead locks taken by a parallel worker
pertain to the same transaction as those taken by the parallel leader.
Some further changes may be needed as well. Until the necessary
adaptations are made, don't generate parallel plans in serializable
mode, and if a previously-generated parallel plan is used after
serializable mode has been activated, run it serially.
This fixes a bug in commit 7aea8e4f2d.
This fixes a long-standing bug which was discovered while investigating
the interaction between the new join pushdown code and the EvalPlanQual
machinery: if a ForeignScan appears on the inner side of a paramaterized
nestloop, an EPQ recheck would re-return the original tuple even if
it no longer satisfied the pushed-down quals due to changed parameter
values.
This fix adds a new member to ForeignScan and ForeignScanState and a
new argument to make_foreignscan, and requires changes to FDWs which
push down quals to populate that new argument with a list of quals they
have chosen to push down. Therefore, I'm only back-patching to 9.5,
even though the bug is not new in 9.5.
Etsuro Fujita, reviewed by me and by Kyotaro Horiguchi.
Four related issues:
1) attnos/varnos/resnos for EXCLUDED were out of sync when a column
after one dropped in the underlying relation was referenced.
2) References to whole-row variables (i.e. EXCLUDED.*) lead to errors.
3) It was possible to reference system columns in the EXCLUDED pseudo
relations, even though they would not have valid contents.
4) References to EXCLUDED were rewritten by the RLS machinery, as
EXCLUDED was treated as if it were the underlying relation.
To fix the first two issues, generate the excluded targetlist with
dropped columns in mind and add an entry for whole row
variables. Instead of unconditionally adding a wholerow entry we could
pull up the expression if needed, but doing it unconditionally seems
simpler. The wholerow entry is only really needed for ruleutils/EXPLAIN
support anyway.
The remaining two issues are addressed by changing the EXCLUDED RTE to
have relkind = composite. That fits with EXCLUDED not actually being a
real relation, and allows to treat it differently in the relevant
places. scanRTEForColumn now skips looking up system columns when the
RTE has a composite relkind; fireRIRrules() already had a corresponding
check, thereby preventing RLS expansion on EXCLUDED.
Also add tests for these issues, and improve a few comments around
excluded handling in setrefs.c.
Reported-By: Peter Geoghegan, Geoff Winkless
Author: Andres Freund, Amit Langote, Peter Geoghegan
Discussion: CAEzk6fdzJ3xYQZGbcuYM2rBd2BuDkUksmK=mY9UYYDugg_GgZg@mail.gmail.com,
CAM3SWZS+CauzbiCEcg-GdE6K6ycHE_Bz6Ksszy8AoixcMHOmsA@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
This code provides infrastructure for a parallel leader to start up
parallel workers to execute subtrees of the plan tree being executed
in the master. User-supplied parameters from ParamListInfo are passed
down, but PARAM_EXEC parameters are not. Various other constructs,
such as initplans, subplans, and CTEs, are also not currently shared.
Nevertheless, there's enough here to support a basic implementation of
parallel query, and we can lift some of the current restrictions as
needed.
Amit Kapila and Robert Haas
Commit 924bcf4f16 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
The "typo" alleged in commit 1e460d4bd was actually a comment that was
correct when written, but I missed updating it in commit b5282aa89.
Use a slightly less specific (and hopefully more future-proof) description
of what is collected. Back-patch to 9.2 where that commit appeared, and
revert the comment to its then-entirely-correct state before that.
Until now we computed these Param ID sets at the end of subquery_planner,
but that approach depends on subquery_planner returning a concrete Plan
tree. We would like to switch over to returning one or more Paths for a
subquery, and in that representation the necessary details aren't fully
fleshed out (not to mention that we don't really want to do this work for
Paths that end up getting discarded). Hence, refactor so that we can
compute the param ID sets at the end of planning, just before
set_plan_references is run.
The main change necessary to make this work is that we need to capture
the set of outer-level Param IDs available to the current query level
before exiting subquery_planner, since the outer levels' plan_params lists
are transient. (That's not going to pose a problem for returning Paths,
since all the work involved in producing that data is part of expression
preprocessing, which will continue to happen before Paths are produced.)
On the plus side, this change gets rid of several existing kluges.
Eventually I'd like to get rid of SS_finalize_plan altogether in favor of
doing this work during set_plan_references, but that will require some
complex rejiggering because SS_finalize_plan needs to visit subplans and
initplans before the main plan. So leave that idea for another day.
A new test case from Andreas Seltenreich showed that we were still a bit
confused about removing PlaceHolderVars during join removal. Specifically,
remove_rel_from_query would remove a PHV that was used only underneath
the removable join, even if the place where it's used was the join partner
relation and not the join clause being deleted. This would lead to a
"too late to create a new PlaceHolderInfo" error later on. We can defend
against that by checking ph_eval_at to see if the PHV could possibly be
getting used at some partner rel.
Also improve some nearby LATERAL-related logic. I decided that the check
on ph_lateral needed to take precedence over the check on ph_needed, in
case there's a lateral reference underneath the join being considered.
(That may be impossible, but I'm not convinced of it, and it's easy enough
to defend against the case.) Also, I realized that remove_rel_from_query's
logic for updating LateralJoinInfos is dead code, because we don't build
those at all until after join removal.
Back-patch to 9.3. Previous versions didn't have the LATERAL issues, of
course, and they also didn't attempt to remove PlaceHolderInfos during join
removal. (I'm starting to wonder if changing that was really such a great
idea.)
Commit 9e7e29c75a introduced an Assert that
join removal didn't reduce the eval_at set of any PlaceHolderVar to empty.
At first glance it looks like join_is_removable ensures that's true --- but
actually, the loop in join_is_removable skips PlaceHolderVars that are not
referenced above the join due to be removed. So, if we don't want any
empty eval_at sets, the right thing to do is to delete any now-unreferenced
PlaceHolderVars from the data structure entirely.
Per fuzz testing by Andreas Seltenreich. Back-patch to 9.3 where the
aforesaid Assert was added.
Further testing revealed that commit f69b4b9495 was still a few
bricks shy of a load: minor tweaking of the previous test cases resulted
in the same wrong-outer-join-order problem coming back. After study
I concluded that my previous changes in make_outerjoininfo() were just
accidentally masking the problem, and should be reverted in favor of
forcing syntactic join order whenever an upper outer join's predicate
doesn't mention a lower outer join's LHS. This still allows the
chained-outer-joins style that is the normally optimizable case.
I also tightened things up some more in join_is_legal(). It seems to me
on review that what's really happening in the exception case where we
ignore a mismatched special join is that we're allowing the proposed join
to associate into the RHS of the outer join we're comparing it to. As
such, we should *always* insist that the proposed join be a left join,
which eliminates a bunch of rather dubious argumentation. The case where
we weren't enforcing that was the one that was already known buggy anyway
(it had a violatable Assert before the aforesaid commit) so it hardly
deserves a lot of deference.
Back-patch to all active branches, like the previous patch. The added
regression test case failed in all branches back to 9.1, and I think it's
only an unrelated change in costing calculations that kept 9.0 from
choosing a broken plan.
An outer join clause that didn't actually reference the RHS (perhaps only
after constant-folding) could confuse the join order enforcement logic,
leading to wrong query results. Also, nested occurrences of such things
could trigger an Assertion that on reflection seems incorrect.
Per fuzz testing by Andreas Seltenreich. The practical use of such cases
seems thin enough that it's not too surprising we've not heard field
reports about it.
This has been broken for a long time, so back-patch to all active branches.
Although I think on all modern machines floating division by zero
results in Infinity not SIGFPE, we still don't want infinities
running around in the planner's costing estimates; too much risk
of that leading to insane behavior.
grouping_planner() failed to consider the possibility that final_rel
might be known dummy and hence have zero rowcount. (I wonder if it
would be better to set a rows estimate of 1 for dummy relations?
But at least in the back branches, changing this convention seems
like a bad idea, so I'll leave that for another day.)
Make certain that get_variable_numdistinct() produces a nonzero result.
The case that can be shown to be broken is with stadistinct < 0.0 and
small ntuples; we did not prevent the result from rounding to zero.
For good luck I applied clamp_row_est() to all the nonconstant return
values.
In ExecChooseHashTableSize(), Assert that we compute positive nbuckets
and nbatch. I know of no reason to think this isn't the case, but it
seems like a good safety check.
Per reports from Piotr Stefaniak. Back-patch to all active branches.
Previously we disallowed pushing down quals to WHERE in the presence of
grouping sets. That's overly restrictive.
We now instead copy quals to WHERE if applicable, leaving the
one in HAVING in place. That's because, at that stage of the planning
process, it's nontrivial to determine if it's safe to remove the one in
HAVING.
Author: Andrew Gierth
Discussion: 874mkt3l59.fsf@news-spur.riddles.org.uk
Backpatch: 9.5, where grouping sets were introduced. This isn't exactly
a bugfix, but it seems better to keep the branches in sync at this point.
The previous coding frequently failed to fail because for one it's
unusual to have rollup clauses with one column, and for another
sometimes the wrong mapping didn't cause obvious problems.
Author: Jeevan Chalke
Reviewed-By: Andrew Gierth
Discussion: CAM2+6=W=9=hQOipH0HAPbkun3Z3TFWij_EiHue0_6UX=oR=1kw@mail.gmail.com
Backpatch: 9.5, where grouping sets were introduced
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
The TABLESAMPLE and row security patches each overlooked this function,
though their errors of omission were opposite: RLS failed to zero out the
securityQuals field, leading to wasteful copying of useless expression
trees in finished plans, while TABLESAMPLE neglected to add a comment
saying that it intentionally *isn't* deleting the tablesample subtree.
There probably should be a similar comment about ctename, too.
Back-patch as appropriate.
Allow CustomPath to have a list of paths, CustomPlan a list of plans,
and CustomPlanState a list of planstates known to the core system, so
that custom path/plan providers can more reasonably use this
infrastructure for nodes with multiple children.
KaiGai Kohei, per a design suggestion from Tom Lane, with some
further kibitzing by me.
Commit c03ad5602f introduced a planner
performance regression for UPDATE/DELETE on large inheritance sets.
It required copying the append_rel_list (which is of size proportional to
the number of inherited tables) once for each inherited table, thus
resulting in O(N^2) time and memory consumption. While it's difficult to
avoid that in general, the extra work only has to be done for
append_rel_list entries that actually reference subquery RTEs, which
inheritance-set entries will not. So we can buy back essentially all of
the loss in cases without subqueries in FROM; and even for those, the added
work is mainly proportional to the number of UNION ALL subqueries.
Back-patch to 9.2, like the previous commit.
Tom Lane and Dean Rasheed, per a complaint from Thomas Munro.
Fix some places where pgindent did silly stuff, often because project
style wasn't followed to begin with. (I've not touched the atomics
headers, though.)
Previously, INSERT with ON CONFLICT DO UPDATE specified used a new
command tag -- UPSERT. It was introduced out of concern that INSERT as
a command tag would be a misrepresentation for ON CONFLICT DO UPDATE, as
some affected rows may actually have been updated.
Alvaro Herrera noticed that the implementation of that new command tag
was incomplete; in subsequent discussion we concluded that having it
doesn't provide benefits that are in line with the compatibility breaks
it requires.
Catversion bump due to the removal of PlannedStmt->isUpsert.
Author: Peter Geoghegan
Discussion: 20150520215816.GI5885@postgresql.org
Paul Ramsey reported that commit 35fcb1b3d0
induced a core dump on commuted ORDER BY expressions, because it was
assuming that the indexorderby expression could be found verbatim in the
relevant equivalence class, but it wasn't there. We really don't need
anything that complicated anyway; for the data types likely to be used for
index ORDER BY operators in the foreseeable future, the exprType() of the
ORDER BY expression will serve fine. (The case where we'd have to work
harder is where the ORDER BY expression's result is only binary-compatible
with the declared input type of the ordering operator; long before worrying
about that, one would need to get rid of GiST's hard-wired assumption that
said datatype is float8.)
Aside from fixing that crash and adding a regression test for the case,
I did some desultory code review:
nodeIndexscan.c was likewise overthinking how hard it ought to work to
identify the datatype of the ORDER BY expressions.
Add comments explaining how come nodeIndexscan.c can get away with
simplifying assumptions about NULLS LAST ordering and no backward scan.
Revert no-longer-needed changes of find_ec_member_for_tle(); while the
new definition was no worse than the old, it wasn't better either, and
it might cause back-patching pain.
Revert entirely bogus additions to genam.h.
This oversight results in a crash at executor startup if the plan has
been copied. outfuncs.c was missed as well.
While we could probably have taught both those files to cope with the
originally chosen representation of an Oid array, it would have been
painful, not least because there'd be no easy way to verify the array
length. An Oid List is far easier to work with. And AFAICS, there is
no particular notational benefit to using an array rather than a list
in the existing parts of the patch either. So just change it to a list.
Error in commit 35fcb1b3d0, which is new,
so no need for back-patch.
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
The distance function can now set *recheck = false, like index quals. The
executor will then re-check the ORDER BY expressions, and use a queue to
reorder the results on the fly.
This makes it possible to do kNN-searches on polygons and circles, which
don't store the exact value in the index, but just a bounding box.
Alexander Korotkov and me
Specifically the tlist and rti of the pseudo "excluded" relation weren't
properly treated by expression_tree_walker, which lead to errors when
excluded was referenced inside a rule because the varnos where not
properly adjusted. Similar omissions in OffsetVarNodes and
expression_tree_mutator had less impact, but should obviously be fixed
nonetheless.
A couple tests of for ON CONFLICT UPDATE into INSERT rule bearing
relations have been added.
In passing I updated a couple comments.
Previously, FDWs could only do "early row locking", that is lock a row as
soon as it's fetched, even though local restriction/join conditions might
discard the row later. This patch adds callbacks that allow FDWs to do
late locking in the same way that it's done for regular tables.
To make use of this feature, an FDW must support the "ctid" column as a
unique row identifier. Currently, since ctid has to be of type TID,
the feature is of limited use, though in principle it could be used by
postgres_fdw. We may eventually allow FDWs to specify another data type
for ctid, which would make it possible for more FDWs to use this feature.
This commit does not modify postgres_fdw to use late locking. We've
tested some prototype code for that, but it's not in committable shape,
and besides it's quite unclear whether it actually makes sense to do late
locking against a remote server. The extra round trips required are likely
to outweigh any benefit from improved concurrency.
Etsuro Fujita, reviewed by Ashutosh Bapat, and hacked up a lot by me
Commit e7cb7ee145 included some design
decisions that seem pretty questionable to me, and there was quite a lot
of stuff not to like about the documentation and comments. Clean up
as follows:
* Consider foreign joins only between foreign tables on the same server,
rather than between any two foreign tables with the same underlying FDW
handler function. In most if not all cases, the FDW would simply have had
to apply the same-server restriction itself (far more expensively, both for
lack of caching and because it would be repeated for each combination of
input sub-joins), or else risk nasty bugs. Anyone who's really intent on
doing something outside this restriction can always use the
set_join_pathlist_hook.
* Rename fdw_ps_tlist/custom_ps_tlist to fdw_scan_tlist/custom_scan_tlist
to better reflect what they're for, and allow these custom scan tlists
to be used even for base relations.
* Change make_foreignscan() API to include passing the fdw_scan_tlist
value, since the FDW is required to set that. Backwards compatibility
doesn't seem like an adequate reason to expect FDWs to set it in some
ad-hoc extra step, and anyway existing FDWs can just pass NIL.
* Change the API of path-generating subroutines of add_paths_to_joinrel,
and in particular that of GetForeignJoinPaths and set_join_pathlist_hook,
so that various less-used parameters are passed in a struct rather than
as separate parameter-list entries. The objective here is to reduce the
probability that future additions to those parameter lists will result in
source-level API breaks for users of these hooks. It's possible that this
is even a small win for the core code, since most CPU architectures can't
pass more than half a dozen parameters efficiently anyway. I kept root,
joinrel, outerrel, innerrel, and jointype as separate parameters to reduce
code churn in joinpath.c --- in particular, putting jointype into the
struct would have been problematic because of the subroutines' habit of
changing their local copies of that variable.
* Avoid ad-hocery in ExecAssignScanProjectionInfo. It was probably all
right for it to know about IndexOnlyScan, but if the list is to grow
we should refactor the knowledge out to the callers.
* Restore nodeForeignscan.c's previous use of the relcache to avoid
extra GetFdwRoutine lookups for base-relation scans.
* Lots of cleanup of documentation and missed comments. Re-order some
code additions into more logical places.
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
Foreign data wrappers can use this capability for so-called "join
pushdown"; that is, instead of executing two separate foreign scans
and then joining the results locally, they can generate a path which
performs the join on the remote server and then is scanned locally.
This commit does not extend postgres_fdw to take advantage of this
capability; it just provides the infrastructure.
Custom scan providers can use this in a similar way. Previously,
it was only possible for a custom scan provider to scan a single
relation. Now, it can scan an entire join tree, provided of course
that it knows how to produce the same results that the join would
have produced if executed normally.
KaiGai Kohei, reviewed by Shigeru Hanada, Ashutosh Bapat, and me.
An outer join appearing within the RHS of an antijoin can't commute with
the antijoin, but somehow I missed teaching make_outerjoininfo() about
that. In Teodor Sigaev's recent trouble report, this manifests as a
"could not find RelOptInfo for given relids" error within eqjoinsel();
but I think silently wrong query results are possible too, if the planner
misorders the joins and doesn't happen to trigger any internal consistency
checks. It's broken as far back as we had antijoins, so back-patch to all
supported branches.
In prepend_row_security_policies(), defaultDeny was always true, so if
there were any hook policies, the RLS policies on the table would just
get discarded. Fixed to start off with defaultDeny as false and then
properly set later if we detect that only the default deny policy exists
for the internal policies.
The infinite recursion detection in fireRIRrules() didn't properly
manage the activeRIRs list in the case of WCOs, so it would incorrectly
report infinite recusion if the same relation with RLS appeared more
than once in the rtable, for example "UPDATE t ... FROM t ...".
Further, the RLS expansion code in fireRIRrules() was handling RLS in
the main loop through the rtable, which lead to RTEs being visited twice
if they contained sublink subqueries, which
prepend_row_security_policies() attempted to handle by exiting early if
the RTE already had securityQuals. That doesn't work, however, since
if the query involved a security barrier view on top of a table with
RLS, the RTE would already have securityQuals (from the view) by the
time fireRIRrules() was invoked, and so the table's RLS policies would
be ignored. This is fixed in fireRIRrules() by handling RLS in a
separate loop at the end, after dealing with any other sublink
subqueries, thus ensuring that each RTE is only visited once for RLS
expansion.
The inheritance planner code didn't correctly handle non-target
relations with RLS, which would get turned into subqueries during
planning. Thus an update of the form "UPDATE t1 ... FROM t2 ..." where
t1 has inheritance and t2 has RLS quals would fail. Fix by making sure
to copy in and update the securityQuals when they exist for non-target
relations.
process_policies() was adding WCOs to non-target relations, which is
unnecessary, and could lead to a lot of wasted time in the rewriter and
the planner. Fix by only adding WCO policies when working on the result
relation. Also in process_policies, we should be copying the USING
policies to the WITH CHECK policies on a per-policy basis, fix by moving
the copying up into the per-policy loop.
Lastly, as noted by Dean, we were simply adding policies returned by the
hook provided to the list of quals being AND'd, meaning that they would
actually restrict records returned and there was no option to have
internal policies and hook-based policies work together permissively (as
all internal policies currently work). Instead, explicitly add support
for both permissive and restrictive policies by having a hook for each
and combining the results appropriately. To ensure this is all done
correctly, add a new test module (test_rls_hooks) to test the various
combinations of internal, permissive, and restrictive hook policies.
Largely from Dean Rasheed (thanks!):
CAEZATCVmFUfUOwwhnBTcgi6AquyjQ0-1fyKd0T3xBWJvn+xsFA@mail.gmail.com
Author: Dean Rasheed, though I added the new hooks and test module.
Previously we would re-use input subexpressions in all expression trees
attached to a Join plan node. However, if it's an outer join and the
subexpression appears in the nullable-side input, this is potentially
incorrect for apparently-matching subexpressions that came from above
the outer join (ie, targetlist and qpqual expressions), because the
executor will treat the subexpression value as NULL when maybe it should
not be.
The case is fairly hard to hit because (a) you need a non-strict
subexpression (else NULL is correct), and (b) we don't usually compute
expressions in the outputs of non-toplevel plan nodes. But we might do
so if the expressions are sort keys for a mergejoin, for example.
Probably in the long run we should make a more explicit distinction between
Vars appearing above and below an outer join, but that will be a major
planner redesign and not at all back-patchable. For the moment, just hack
set_join_references so that it will not match any non-Var expressions
coming from nullable inputs to expressions that came from above the join.
(This is somewhat overkill, in that a strict expression could still be
matched, but it doesn't seem worth the effort to check that.)
Per report from Qingqing Zhou. The added regression test case is based
on his example.
This has been broken for a very long time, so back-patch to all active
branches.
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
This patch fixes two inadequacies of the PlanRowMark representation.
First, that the original LockingClauseStrength isn't stored (and cannot be
inferred for foreign tables, which always get ROW_MARK_COPY). Since some
PlanRowMarks are created out of whole cloth and don't actually have an
ancestral RowMarkClause, this requires adding a dummy LCS_NONE value to
enum LockingClauseStrength, which is fairly annoying but the alternatives
seem worse. This fix allows getting rid of the use of get_parse_rowmark()
in FDWs (as per the discussion around commits 462bd95705 and
8ec8760fc8), and it simplifies some things elsewhere.
Second, that the representation assumed that all child tables in an
inheritance hierarchy would use the same RowMarkType. That's true today
but will soon not be true. We add an "allMarkTypes" field that identifies
the union of mark types used in all a parent table's children, and use
that where appropriate (currently, only in preprocess_targetlist()).
In passing fix a couple of minor infelicities left over from the SKIP
LOCKED patch, notably that _outPlanRowMark still thought waitPolicy
is a bool.
Catversion bump is required because the numeric values of enum
LockingClauseStrength can appear in on-disk rules.
Extracted from a much larger patch to support foreign table inheritance;
it seemed worth breaking this out, since it's a separable concern.
Shigeru Hanada and Etsuro Fujita, somewhat modified by me
We can't handle this in the general case due to limitations of the
planner's data representations; but we can allow it in many useful cases,
by being careful to flatten only when we are pulling a single-row subquery
up into a FROM (or, equivalently, inner JOIN) node that will still have at
least one remaining relation child. Per discussion of an example from
Kyotaro Horiguchi.
If we have a semijoin, say
SELECT * FROM x WHERE x1 IN (SELECT y1 FROM y)
and we're estimating the cost of a parameterized indexscan on x, the number
of repetitions of the indexscan should not be taken as the size of y; it'll
really only be the number of distinct values of y1, because the only valid
plan with y on the outside of a nestloop would require y to be unique-ified
before joining it to x. Most of the time this doesn't make that much
difference, but sometimes it can lead to drastically underestimating the
cost of the indexscan and hence choosing a bad plan, as pointed out by
David Kubečka.
Fixing this is a bit difficult because parameterized indexscans are costed
out quite early in the planning process, before we have the information
that would be needed to call estimate_num_groups() and thereby estimate the
number of distinct values of the join column(s). However we can move the
code that extracts a semijoin RHS's unique-ification columns, so that it's
done in initsplan.c rather than on-the-fly in create_unique_path(). That
shouldn't make any difference speed-wise and it's really a bit cleaner too.
The other bit of information we need is the size of the semijoin RHS,
which is easy if it's a single relation (we make those estimates before
considering indexscan costs) but problematic if it's a join relation.
The solution adopted here is just to use the product of the sizes of the
join component rels. That will generally be an overestimate, but since
estimate_num_groups() only uses this input as a clamp, an overestimate
shouldn't hurt us too badly. In any case we don't allow this new logic
to produce a value larger than we would have chosen before, so that at
worst an overestimate leaves us no wiser than we were before.
This code relied on pointer equality to identify which restriction clauses
also appear in the indexquals (and, therefore, don't need to be applied as
simple filter conditions). That was okay once upon a time, years ago,
before we introduced the equivalence-class machinery. Now there's about a
50-50 chance that an equality clause appearing in the indexquals will be
the mirror image (commutator) of its mate in the restriction list. When
that happens, we'd erroneously think that the clause would be re-evaluated
at each visited row, and therefore inflate the cost estimate for the
indexscan by the clause's cost.
Add some logic to catch this case. It seems to me that it continues not to
be worthwhile to expend the extra predicate-proof work that createplan.c
will do on the finally-selected plan, but this case is common enough and
cheap enough to handle that we should do so.
This will make a small difference (about one cpu_operator_cost per row)
in simple cases; but in situations where there's an expensive function in
the indexquals, it can make a very large difference, as seen in recent
example from Jeff Janes.
This is a long-standing bug, but I'm hesitant to back-patch because of the
possibility of destabilizing plan choices that people may be happy with.
We did not need a location tag on NullTest or BooleanTest before, because
no error messages referred directly to their locations. That's planned
to change though, so add these fields in a separate housekeeping commit.
Catversion bump because stored rules may change.
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
The previous coding in EXPLAIN always labeled a ModifyTable node with the
name of the target table affected by its first child plan. When originally
written, this was necessarily the parent table of the inheritance tree,
so everything was unconfusing. But when we added NO INHERIT constraints,
it became possible for the parent table to be deleted from the plan by
constraint exclusion while still leaving child tables present. This led to
the ModifyTable plan node being labeled with the first surviving child,
which was deemed confusing. Fix it by retaining the parent table's RT
index in a new field in ModifyTable.
Etsuro Fujita, reviewed by Ashutosh Bapat and myself
Ordinarily we can omit checking of a WHERE condition that matches a partial
index's condition, when we are using an indexscan on that partial index.
However, in SELECT FOR UPDATE we must include the "redundant" filter
condition in the plan so that it gets checked properly in an EvalPlanQual
recheck. The planner got this mostly right, but improperly omitted the
filter condition if the index in question was on an inheritance child
table. In READ COMMITTED mode, this could result in incorrectly returning
just-updated rows that no longer satisfy the filter condition.
The cause of the error is using get_parse_rowmark() when get_plan_rowmark()
is what should be used during planning. In 9.3 and up, also fix the same
mistake in contrib/postgres_fdw. It's currently harmless there (for lack
of inheritance support) but wrong is wrong, and the incorrect code might
get copied to someplace where it's more significant.
Report and fix by Kyotaro Horiguchi. Back-patch to all supported branches.
This patch adds a function that replaces a bms_membership() test followed
by a bms_singleton_member() call, performing both the test and the
extraction of a singleton set's member in one scan of the bitmapset.
The performance advantage over the old way is probably minimal in current
usage, but it seems worthwhile on notational grounds anyway.
David Rowley
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
These cases formerly failed with errors about "could not find array type
for data type". Now they yield arrays of the same element type and one
higher dimension.
The implementation involves creating functions with API similar to the
existing accumArrayResult() family. I (tgl) also extended the base family
by adding an initArrayResult() function, which allows callers to avoid
special-casing the zero-inputs case if they just want an empty array as
result. (Not all do, so the previous calling convention remains valid.)
This allowed simplifying some existing code in xml.c and plperl.c.
Ali Akbar, reviewed by Pavel Stehule, significantly modified by me
The locution "EXISTS(SELECT ... LIMIT 1)" seems to be rather common among
people who don't realize that the database already performs optimizations
equivalent to putting LIMIT 1 in the sub-select. Unfortunately, this was
actually making things worse, because it prevented us from optimizing such
EXISTS clauses into semi or anti joins. Teach simplify_EXISTS_query() to
suppress constant-positive LIMIT clauses. That fixes the semi/anti-join
case, and may help marginally even for cases that have to be left as
sub-SELECTs.
Marti Raudsepp, reviewed by David Rowley
postgres_fdw would send query conditions involving system columns to the
remote server, even though it makes no effort to ensure that system
columns other than CTID match what the remote side thinks. tableoid,
in particular, probably won't match and might have some use in queries.
Hence, prevent sending conditions that include non-CTID system columns.
Also, create_foreignscan_plan neglected to check local restriction
conditions while determining whether to set fsSystemCol for a foreign
scan plan node. This again would bollix the results for queries that
test a foreign table's tableoid.
Back-patch the first fix to 9.3 where postgres_fdw was introduced.
Back-patch the second to 9.2. The code is probably broken in 9.1 as
well, but the patch doesn't apply cleanly there; given the weak state
of support for FDWs in 9.1, it doesn't seem worth fixing.
Etsuro Fujita, reviewed by Ashutosh Bapat, and somewhat modified by me
Make it work more like FDW plans do: instead of assuming that there are
expressions in a CustomScan plan node that the core code doesn't know
about, insist that all subexpressions that need planner attention be in
a "custom_exprs" list in the Plan representation. (Of course, the
custom plugin can break the list apart again at executor initialization.)
This lets us revert the parts of the patch that exposed setrefs.c and
subselect.c processing to the outside world.
Also revert the GetSpecialCustomVar stuff in ruleutils.c; that concept
may work in future, but it's far from fully baked right now.
Get rid of the pernicious entanglement between planner and executor headers
introduced by commit 0b03e5951b.
Also, rearrange the CustomFoo struct/typedef definitions so that all the
typedef names are seen as used by the compiler. Without this pgindent
will mess things up a bit, which is not so important perhaps, but it also
removes a bizarre discrepancy between the declaration arrangement used for
CustomExecMethods and that used for CustomScanMethods and
CustomPathMethods.
Clean up the commentary around ExecSupportsMarkRestore to reflect the
rather large change in its API.
Const-ify register_custom_path_provider's argument. This necessitates
casting away const in the function, but that seems better than forcing
callers of the function to do so (or else not const-ify their method
pointer structs, which was sort of the whole point).
De-export fix_expr_common. I don't like the exporting of fix_scan_expr
or replace_nestloop_params either, but this one surely has got little
excuse.
This allows extension modules to define their own methods for
scanning a relation, and get the core code to use them. It's
unclear as yet how much use this capability will find, but we
won't find out if we never commit it.
KaiGai Kohei, reviewed at various times and in various levels
of detail by Shigeru Hanada, Tom Lane, Andres Freund, Álvaro
Herrera, and myself.
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
While withCheckOption exprs had been handled in many cases by
happenstance, they need to be handled during set_plan_references and
more specifically down in set_plan_refs for ModifyTable plan nodes.
This is to ensure that the opfuncid's are set for operators referenced
in the withCheckOption exprs.
Identified as an issue by Thom Brown
Patch by Dean Rasheed
Back-patch to 9.4, where withCheckOption was introduced.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
The executor has thrown errors for negative OFFSET values since 8.4 (see
commit bfce56eea4), but in a moment of brain
fade I taught the planner that OFFSET with a constant negative value was a
no-op (commit 1a1832eb08). Reinstate the
former behavior by only discarding OFFSET with a value of exactly 0. In
passing, adjust a planner comment that referenced the ancient behavior.
Back-patch to 9.3 where the mistake was introduced.
We can remove a left join to a relation if the relation's output is
provably distinct for the columns involved in the join clause (considering
only equijoin clauses) and the relation supplies no variables needed above
the join. Previously, the join removal logic could only prove distinctness
by reference to unique indexes of a table. This patch extends the logic
to consider subquery relations, wherein distinctness might be proven by
reference to GROUP BY, DISTINCT, etc.
We actually already had some code to check that a subquery's output was
provably distinct, but it was hidden inside pathnode.c; which was a pretty
bad place for it really, since that file is mostly boilerplate Path
construction and comparison. Move that code to analyzejoins.c, which is
arguably a more appropriate location, and is certainly the site of the
new usage for it.
David Rowley, reviewed by Simon Riggs
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
Views which are marked as security_barrier must have their quals
applied before any user-defined quals are called, to prevent
user-defined functions from being able to see rows which the
security barrier view is intended to prevent them from seeing.
Remove the restriction on security barrier views being automatically
updatable by adding a new securityQuals list to the RTE structure
which keeps track of the quals from security barrier views at each
level, independently of the user-supplied quals. When RTEs are
later discovered which have securityQuals populated, they are turned
into subquery RTEs which are marked as security_barrier to prevent
any user-supplied quals being pushed down (modulo LEAKPROOF quals).
Dean Rasheed, reviewed by Craig Ringer, Simon Riggs, KaiGai Kohei
The original coding of EquivalenceClasses didn't foresee that appendrel
child relations might themselves be appendrels; but this is possible for
example when a UNION ALL subquery scans a table with inheritance children.
The oversight led to failure to optimize ordering-related issues very well
for the grandchild tables. After some false starts involving explicitly
flattening the appendrel representation, we found that this could be fixed
easily by removing a few implicit assumptions about appendrel parent rels
not being children themselves.
Kyotaro Horiguchi and Tom Lane, reviewed by Noah Misch
When pulling a "postponed" qual from a LATERAL subquery up into the quals
of an outer join, we must make sure that the postponed qual is included
in those seen by make_outerjoininfo(). Otherwise we might compute a
too-small min_lefthand or min_righthand for the outer join, leading to
"JOIN qualification cannot refer to other relations" failures from
distribute_qual_to_rels. Subtler errors in the created plan seem possible,
too, if the extra qual would only affect join ordering constraints.
Per bug #9041 from David Leverton. Back-patch to 9.3.
We don't need make_restrictinfo_from_bitmapqual() anymore at all.
generate_bitmap_or_paths() doesn't need to be exported, and we can
drop its rather klugy restriction_only flag.
It's possible to extract a restriction OR clause from a join clause that
has the form of an OR-of-ANDs, if each sub-AND includes a clause that
mentions only one specific relation. While PG has been aware of that idea
for many years, the code previously only did it if it could extract an
indexable OR clause. On reflection, though, that seems a silly limitation:
adding a restriction clause can be a win by reducing the number of rows
that have to be filtered at the join step, even if we have to test the
clause as a plain filter clause during the scan. This should be especially
useful for foreign tables, where the change can cut the number of rows that
have to be retrieved from the foreign server; but testing shows it can win
even on local tables. Per a suggestion from Robert Haas.
As a heuristic, I made the code accept an extracted restriction clause
if its estimated selectivity is less than 0.9, which will probably result
in accepting extracted clauses just about always. We might need to tweak
that later based on experience.
Since the code no longer has even a weak connection to Path creation,
remove orindxpath.c and create a new file optimizer/util/orclauses.c.
There's some additional janitorial cleanup of now-dead code that needs
to happen, but it seems like that's a fit subject for a separate commit.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
Fix an oversight in commit b3aaf9081a1a95c245fd605dcf02c91b3a5c3a29: we do
indeed need to process the planner's append_rel_list when copying RTE
subqueries, because if any of them were flattenable UNION ALL subqueries,
the append_rel_list shows which subquery RTEs were pulled up out of which
other ones. Without this, UNION ALL subqueries aren't correctly inserted
into the update plans for inheritance child tables after the first one,
typically resulting in no update happening for those child table(s).
Per report from Victor Yegorov.
Experimentation with this case also exposed a fault in commit
a7b965382cf0cb30aeacb112572718045e6d4be7: if an inherited UPDATE/DELETE
was proven totally dummy by constraint exclusion, we might arrive at
add_rtes_to_flat_rtable with root->simple_rel_array being NULL. This
should be interpreted as not having any RelOptInfos. I chose to code
the guard as a check against simple_rel_array_size, so as to also
provide some protection against indexing off the end of the array.
Back-patch to 9.2 where the faulty code was added.
An expression such as WHERE (... x IN (SELECT ...) ...) IN (SELECT ...)
could produce an invalid plan that results in a crash at execution time,
if the planner attempts to flatten the outer IN into a semi-join.
This happens because convert_testexpr() was not expecting any nested
SubLinks and would wrongly replace any PARAM_SUBLINK Params belonging
to the inner SubLink. (I think the comment denying that this case could
happen was wrong when written; it's certainly been wrong for quite a long
time, since very early versions of the semijoin flattening logic.)
Per report from Teodor Sigaev. Back-patch to all supported branches.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
Bug #8591 from Claudio Freire demonstrates that get_eclass_for_sort_expr
must be able to compute valid em_nullable_relids for any new equivalence
class members it creates. I'd worried about this in the commit message
for db9f0e1d9a, but claimed that it wasn't a
problem because multi-member ECs should already exist when it runs. That
is transparently wrong, though, because this function is also called by
initialize_mergeclause_eclasses, which runs during deconstruct_jointree.
The example given in the bug report (which the new regression test item
is based upon) fails because the COALESCE() expression is first seen by
initialize_mergeclause_eclasses rather than process_equivalence.
Fixing this requires passing the appropriate nullable_relids set to
get_eclass_for_sort_expr, and it requires new code to compute that set
for top-level expressions such as ORDER BY, GROUP BY, etc. We store
the top-level nullable_relids in a new field in PlannerInfo to avoid
computing it many times. In the back branches, I've added the new
field at the end of the struct to minimize ABI breakage for planner
plugins. There doesn't seem to be a good alternative to changing
get_eclass_for_sort_expr's API signature, though. There probably aren't
any third-party extensions calling that function directly; moreover,
if there are, they probably need to think about what to pass for
nullable_relids anyway.
Back-patch to 9.2, like the previous patch in this area.
Before jamming a desired targetlist into a plan node, one really ought to
make sure the plan node can handle projections, and insert a buffering
Result plan node if not. planagg.c forgot to do this, which is a hangover
from the days when it only dealt with IndexScan plan types. MergeAppend
doesn't project though, not to mention that it gets unhappy if you remove
its possibly-resjunk sort columns. The code accidentally failed to fail
for cases in which the min/max argument was a simple Var, because the new
targetlist would be equivalent to the original "flat" tlist anyway.
For any more complex case, it's been broken since 9.1 where we introduced
the ability to optimize min/max using MergeAppend, as reported by Raphael
Bauduin. Fix by duplicating the logic from grouping_planner that decides
whether we need a Result node.
In 9.2 and 9.1, this requires back-porting the tlist_same_exprs() function
introduced in commit 4387cf956b, else we'd
uselessly add a Result node in cases that worked before. It's rather
tempting to back-patch that whole commit so that we can avoid extra Result
nodes in mainline cases too; but I'll refrain, since that code hasn't
really seen all that much field testing yet.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
It's possible that inlining of SQL functions (or perhaps other changes?)
has exposed typmod information not known at parse time. In such cases,
Vars generated by query_planner might have valid typmod values while the
original grouping columns only have typmod -1. This isn't a semantic
problem since the behavior of grouping only depends on type not typmod,
but it breaks locate_grouping_columns' use of tlist_member to locate the
matching entry in query_planner's result tlist.
We can fix this without an excessive amount of new code or complexity by
relying on the fact that locate_grouping_columns only gets called when
make_subplanTargetList has set need_tlist_eval == false, and that can only
happen if all the grouping columns are simple Vars. Therefore we only need
to search the sub_tlist for a matching Var, and we can reasonably define a
"match" as being a match of the Var identity fields
varno/varattno/varlevelsup. The code still Asserts that vartype matches,
but ignores vartypmod.
Per bug #8393 from Evan Martin. The added regression test case is
basically the same as his example. This has been broken for a very long
time, so back-patch to all supported branches.
We should account for the per-group hashtable entry overhead when
considering whether to use a hash aggregate to implement DISTINCT. The
comparable logic in choose_hashed_grouping() gets this right, but I think
I omitted it here in the mistaken belief that there would be no overhead
if there were no aggregate functions to be evaluated. This can result in
more than 2X underestimate of the hash table size, if the tuples being
aggregated aren't very wide. Per report from Tomas Vondra.
This bug is of long standing, but per discussion we'll only back-patch into
9.3. Changing the estimation behavior in stable branches seems to carry too
much risk of destabilizing plan choices for already-tuned applications.
In an example such as
SELECT * FROM
i LEFT JOIN LATERAL (SELECT * FROM j WHERE i.n = j.n) j ON true;
it is safe to pull up the LATERAL subquery into its parent, but we must
then treat the "i.n = j.n" clause as a qual clause of the LEFT JOIN. The
previous coding in deconstruct_recurse mistakenly labeled the clause as
"is_pushed_down", resulting in wrong semantics if the clause were applied
at the join node, as per an example submitted awhile ago by Jeremy Evans.
To fix, postpone processing of such clauses until we return back up to
the appropriate recursion depth in deconstruct_recurse.
In addition, tighten the is-safe-to-pull-up checks in is_simple_subquery;
we previously missed the possibility that the LATERAL subquery might itself
contain an outer join that makes lateral references in lower quals unsafe.
A regression test case equivalent to Jeremy's example was already in my
commit of yesterday, but was giving the wrong results because of this
bug. This patch fixes the expected output for that, and also adds a
test case for the second problem.
The planner largely failed to consider the possibility that a
PlaceHolderVar's expression might contain a lateral reference to a Var
coming from somewhere outside the PHV's syntactic scope. We had a previous
report of a problem in this area, which I tried to fix in a quick-hack way
in commit 4da6439bd8, but Antonin Houska
pointed out that there were still some problems, and investigation turned
up other issues. This patch largely reverts that commit in favor of a more
thoroughly thought-through solution. The new theory is that a PHV's
ph_eval_at level cannot be higher than its original syntactic level. If it
contains lateral references, those don't change the ph_eval_at level, but
rather they create a lateral-reference requirement for the ph_eval_at join
relation. The code in joinpath.c needs to handle that.
Another issue is that createplan.c wasn't handling nested PlaceHolderVars
properly.
In passing, push knowledge of lateral-reference checks for join clauses
into join_clause_is_movable_to. This is mainly so that FDWs don't need
to deal with it.
This patch doesn't fix the original join-qual-placement problem reported by
Jeremy Evans (and indeed, one of the new regression test cases shows the
wrong answer because of that). But the PlaceHolderVar problems need to be
fixed before that issue can be addressed, so committing this separately
seems reasonable.
The planner logic that attempted to make a preliminary estimate of the
ph_needed levels for PlaceHolderVars seems to be completely broken by
lateral references. Fortunately, the potential join order optimization
that this code supported seems to be of relatively little value in
practice; so let's just get rid of it rather than trying to fix it.
Getting rid of this allows fairly substantial simplifications in
placeholder.c, too, so planning in such cases should be a bit faster.
Issue noted while pursuing bugs reported by Jeremy Evans and Antonin
Houska, though this doesn't in itself fix either of their reported cases.
What this does do is prevent an Assert crash in the kind of query
illustrated by the added regression test. (I'm not sure that the plan for
that query is stable enough across platforms to be usable as a regression
test output ... but we'll soon find out from the buildfarm.)
Back-patch to 9.3. The problem case can't arise without LATERAL, so
no need to touch older branches.
Formerly, query_planner returned one or possibly two Paths for the topmost
join relation, so that grouping_planner didn't see the join RelOptInfo
(at least not directly; it didn't have any hesitation about examining
cheapest_path->parent, though). However, correct selection of the Paths
involved a significant amount of coupling between query_planner and
grouping_planner, a problem which has gotten worse over time. It seems
best to give up on this API choice and instead return the topmost
RelOptInfo explicitly. Then grouping_planner can pull out the Paths it
wants from the rel's path list. In this way we can remove all knowledge
of grouping behaviors from query_planner.
The only real benefit of the old way is that in the case of an empty
FROM clause, we never made any RelOptInfos at all, just a Path. Now
we have to gin up a dummy RelOptInfo to represent the empty FROM clause.
That's not a very big deal though.
While at it, simplify query_planner's API a bit more by having the caller
set up root->tuple_fraction and root->limit_tuples, rather than passing
those values as separate parameters. Since query_planner no longer does
anything with either value, requiring it to fill the PlannerInfo fields
seemed pretty arbitrary.
This patch just rearranges code; it doesn't (intentionally) change any
behaviors. Followup patches will do more interesting things.
My tweak of these error messages in commit c359a1b082 contained the
thinko that a query would always have rowMarks set for a query
containing a locking clause. Not so: when declaring a cursor, for
instance, rowMarks isn't set at the point we're checking, so we'd be
dereferencing a NULL pointer.
The fix is to pass the lock strength to the function raising the error,
instead of trying to reverse-engineer it. The result not only is more
robust, but it also seems cleaner overall.
Per report from Robert Haas.
In commit 0ac5ad5134 I changed some error messages from "FOR
UPDATE/SHARE" to a rather long gobbledygook which nobody liked. Then,
in commit cb9b66d31 I changed them again, but the alternative chosen
there was deemed suboptimal by Peter Eisentraut, who in message
1373937980.20441.8.camel@vanquo.pezone.net proposed an alternative
involving a dynamically-constructed string based on the actual locking
strength specified in the SQL command. This patch implements that
suggestion.
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
When creating a sort to support a group by, we need to look up the
target entry in the target list by the resno using get_tle_by_resno().
This particular code-path didn't check the result prior to attempting
to dereference it, while all other callers did. While I can't see a
way for this usage of get_tle_by_resno() to fail (you can't ask for
a column to be sorted on which isn't included in the group by), it's
probably best to check that we didn't end up with a NULL somehow
anyway than risk the segfault.
I'm willing to back-patch this if others feel it's necessary, but my
guess is new features are what might tickle this rather than anything
existing.
Missing check spotted by the Coverity scanner.
This reverts the code changes in 50c137487c,
which turned out to induce crashes and not completely fix the problem
anyway. That commit only considered single subqueries that were excluded
by constraint-exclusion logic, but actually the problem also exists for
subqueries that are appendrel members (ie part of a UNION ALL list). In
such cases we can't add a dummy subpath to the appendrel's AppendPath list
without defeating the logic that recognizes when an appendrel is completely
excluded. Instead, fix the problem by having setrefs.c scan the rangetable
an extra time looking for subqueries that didn't get into the plan tree.
(This approach depends on the 9.2 change that made set_subquery_pathlist
generate dummy paths for excluded single subqueries, so that the exclusion
behavior is the same for single subqueries and appendrel members.)
Note: it turns out that the appendrel form of the missed-permissions-checks
bug exists as far back as 8.4. However, since the practical effect of that
bug seems pretty minimal, consensus is to not attempt to fix it in the back
branches, at least not yet. Possibly we could back-port this patch once
it's gotten a reasonable amount of testing in HEAD. For the moment I'm
just going to revert the previous patch in 9.2.
A view defined as "select <something> where false" had the curious property
that the system wouldn't check whether users had the privileges necessary
to select from it. More generally, permissions checks could be skipped
for tables referenced in sub-selects or views that were proven empty by
constraint exclusion (although some quick testing suggests this seldom
happens in cases of practical interest). This happened because the planner
failed to include rangetable entries for such tables in the finished plan.
This was noticed in connection with erroneous handling of materialized
views, but actually the issue is quite unrelated to matviews. Therefore,
revert commit 200ba1667b in favor of a more
direct test for the real problem.
Back-patch to 9.2 where the bug was introduced (by commit
7741dd6590).
This patch gets rid of the concept of, and infrastructure for,
non-canonical PathKeys; we now only ever create canonical pathkey lists.
The need for non-canonical pathkeys came from the desire to have
grouping_planner initialize query_pathkeys and related pathkey lists before
calling query_planner. However, since query_planner didn't actually *do*
anything with those lists before they'd been made canonical, we can get rid
of the whole mess by just not creating the lists at all until the point
where we formerly canonicalized them.
There are several ways in which we could implement that without making
query_planner itself deal with grouping/sorting features (which are
supposed to be the province of grouping_planner). I chose to add a
callback function to query_planner's API; other alternatives would have
required adding more fields to PlannerInfo, which while not bad in itself
would create an ABI break for planner-related plugins in the 9.2 release
series. This still breaks ABI for anything that calls query_planner
directly, but it seems somewhat unlikely that there are any such plugins.
I had originally conceived of this change as merely a step on the way to
fixing bug #8049 from Teun Hoogendoorn; but it turns out that this fixes
that bug all by itself, as per the added regression test. The reason is
that now get_eclass_for_sort_expr is adding the ORDER BY expression at the
end of EquivalenceClass creation not the start, and so anything that is in
a multi-member EquivalenceClass has already been created with correct
em_nullable_relids. I am suspicious that there are related scenarios in
which we still need to teach get_eclass_for_sort_expr to compute correct
nullable_relids, but am not eager to risk destabilizing either 9.2 or 9.3
to fix bugs that are only hypothetical. So for the moment, do this and
stop here.
Back-patch to 9.2 but not to earlier branches, since they don't exhibit
this bug for lack of join-clause-movement logic that depends on
em_nullable_relids being correct. (We might have to revisit that choice
if any related bugs turn up.) In 9.2, don't change the signature of
make_pathkeys_for_sortclauses nor remove canonicalize_pathkeys, so as
not to risk more plugin breakage than we have to.
The planner sometimes inserts Result nodes to perform column projections
(ie, arbitrary scalar calculations) above plan nodes that lack projection
logic of their own. However, we did that even if the lower plan node was
in fact producing the required column set already; which is a pretty common
case given the popularity of "SELECT * FROM ...". Measurements show that
the useless plan node adds non-negligible overhead, especially when there
are many columns in the result. So add a check to avoid inserting a Result
node unless there's something useful for it to do.
There are a couple of remaining places where unnecessary Result nodes
could get inserted, but they are (a) much less performance-critical,
and (b) coded in such a way that it's hard to avoid inserting a Result,
because the desired tlist is changed on-the-fly in subsequent logic.
We'll leave those alone for now.
Kyotaro Horiguchi; reviewed and further hacked on by Amit Kapila and
Tom Lane.
This patch adds the core-system infrastructure needed to support updates
on foreign tables, and extends contrib/postgres_fdw to allow updates
against remote Postgres servers. There's still a great deal of room for
improvement in optimization of remote updates, but at least there's basic
functionality there now.
KaiGai Kohei, reviewed by Alexander Korotkov and Laurenz Albe, and rather
heavily revised by Tom Lane.
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
In a query such as "SELECT DISTINCT min(x) FROM tab", the DISTINCT is
pretty useless (there being only one output row), but nonetheless it
shouldn't fail. But it could fail if "tab" is an inheritance parent,
because planagg.c's code for fixing up equivalence classes after making the
index-optimized MIN/MAX transformation wasn't prepared to find child-table
versions of the aggregate expression. The least ugly fix seems to be
to add an option to mutate_eclass_expressions() to skip child-table
equivalence class members, which aren't used anymore at this stage of
planning so it's not really necessary to fix them. Since child members
are ignored in many cases already, it seems plausible for
mutate_eclass_expressions() to have an option to ignore them too.
Per bug #7703 from Maxim Boguk.
Back-patch to 9.1. Although the same code exists before that, it cannot
encounter child-table aggregates AFAICS, because the index optimization
transformation cannot succeed on inheritance trees before 9.1 (for lack
of MergeAppend).
If a potential equivalence clause references a variable from the nullable
side of an outer join, the planner needs to take care that derived clauses
are not pushed to below the outer join; else they may use the wrong value
for the variable. (The problem arises only with non-strict clauses, since
if an upper clause can be proven strict then the outer join will get
simplified to a plain join.) The planner attempted to prevent this type
of error by checking that potential equivalence clauses aren't
outerjoin-delayed as a whole, but actually we have to check each side
separately, since the two sides of the clause will get moved around
separately if it's treated as an equivalence. Bugs of this type can be
demonstrated as far back as 7.4, even though releases before 8.3 had only
a very ad-hoc notion of equivalence clauses.
In addition, we neglected to account for the possibility that such clauses
might have nonempty nullable_relids even when not outerjoin-delayed; so the
equivalence-class machinery lacked logic to compute correct nullable_relids
values for clauses it constructs. This oversight was harmless before 9.2
because we were only using RestrictInfo.nullable_relids for OR clauses;
but as of 9.2 it could result in pushing constructed equivalence clauses
to incorrect places. (This accounts for bug #7604 from Bill MacArthur.)
Fix the first problem by adding a new test check_equivalence_delay() in
distribute_qual_to_rels, and fix the second one by adding code in
equivclass.c and called functions to set correct nullable_relids for
generated clauses. Although I believe the second part of this is not
currently necessary before 9.2, I chose to back-patch it anyway, partly to
keep the logic similar across branches and partly because it seems possible
we might find other reasons why we need valid values of nullable_relids in
the older branches.
Add regression tests illustrating these problems. In 9.0 and up, also
add test cases checking that we can push constants through outer joins,
since we've broken that optimization before and I nearly broke it again
with an overly simplistic patch for this problem.
In commit 1bc16a9460 I added a minor
optimization to drop the component variables of a GROUP BY expression from
the target list computed at the aggregation level of a query, if those Vars
weren't referenced elsewhere in the tlist. However, I overlooked that the
window-function planning code would deconstruct such expressions and thus
need to have access to their component variables. Fix it to not do that.
While at it, I removed the distinction between volatile and nonvolatile
window partition/order expressions: the code now computes all of them
at the aggregation level. This saves a relatively expensive check for
volatility, and it's unclear that the resulting plan isn't better anyway.
Per bug #7535 from Louis-David Mitterrand. Back-patch to 9.2.
The planner previously assumed that parameter Vars having the same absolute
query level, varno, and varattno could safely be assigned the same runtime
PARAM_EXEC slot, even though they might be different Vars appearing in
different subqueries. This was (probably) safe before the introduction of
CTEs, but the lazy-evalution mechanism used for CTEs means that a CTE can
be executed during execution of some other subquery, causing the lifespan
of Params at the same syntactic nesting level as the CTE to overlap with
use of the same slots inside the CTE. In 9.1 we created additional hazards
by using the same parameter-assignment technology for nestloop inner scan
parameters, but it was broken before that, as illustrated by the added
regression test.
To fix, restructure the planner's management of PlannerParamItems so that
items having different semantic lifespans are kept rigorously separated.
This will probably result in complex queries using more runtime PARAM_EXEC
slots than before, but the slots are cheap enough that this hardly matters.
Also, stop generating PlannerParamItems containing Params for subquery
outputs: all we really need to do is reserve the PARAM_EXEC slot number,
and that now only takes incrementing a counter. The planning code is
simpler and probably faster than before, as well as being more correct.
Per report from Vik Reykja.
These changes will mostly also need to be made in the back branches, but
I'm going to hold off on that until after 9.2.0 wraps.
If a PlaceHolderVar contains a pulled-up LATERAL reference, its minimum
possible evaluation level might be higher in the join tree than its
original syntactic location. That in turn affects the ph_needed level for
any contained PlaceHolderVars (that is, those PHVs had better propagate up
the join tree at least to the evaluation level of the outer PHV). We got
this mostly right, but mark_placeholder_maybe_needed() failed to account
for the effect, and in consequence could leave the inner PHVs with
ph_may_need less than what their ultimate ph_needed value will be. That's
bad because it could lead to failure to select a join order that will allow
evaluation of the inner PHV at a valid location. Fix that, and add an
Assert that checks that we don't ever set ph_needed to more than
ph_may_need.
The LATERAL implementation is now basically complete, and I still don't
see a cost-effective way to make an exact qual scope cross-check in the
presence of LATERAL. However, I did add a PlannerInfo.hasLateralRTEs flag
along the way, so it's easy to make the check only when not hasLateralRTEs.
That seems to still be useful, and it beats having no check at all.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
In the initial cut at LATERAL, I kept the rule that cheapest_total_path
was always unparameterized, which meant it had to be NULL if the relation
has no unparameterized paths. It turns out to work much more nicely if
we always have *some* path nominated as cheapest-total for each relation.
In particular, let's still say it's the cheapest unparameterized path if
there is one; if not, take the cheapest-total-cost path among those of
the minimum available parameterization. (The first rule is actually
a special case of the second.)
This allows reversion of some temporary lobotomizations I'd put in place.
In particular, the planner can now consider hash and merge joins for
joins below a parameter-supplying nestloop, even if there aren't any
unparameterized paths available. This should bring planning of
LATERAL-containing queries to the same level as queries not using that
feature.
Along the way, simplify management of parameterized paths in add_path()
and friends. In the original coding for parameterized paths in 9.2,
I tried to minimize the logic changes in add_path(), so it just treated
parameterization as yet another dimension of comparison for paths.
We later made it ignore pathkeys (sort ordering) of parameterized paths,
on the grounds that ordering isn't a useful property for the path on the
inside of a nestloop, so we might as well get rid of useless parameterized
paths as quickly as possible. But we didn't take that reasoning as far as
we should have. Startup cost isn't a useful property inside a nestloop
either, so add_path() ought to discount startup cost of parameterized paths
as well. Having done that, the secondary sorting I'd implemented (in
add_parameterized_path) is no longer needed --- any parameterized path that
survives add_path() at all is worth considering at higher levels. So this
should be a bit faster as well as simpler.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
Formerly, subquery pullup had no need to examine other entries in the range
table, since they could not contain any references to the subquery being
pulled up. That's no longer true with LATERAL, so now we need to be able
to visit rangetable subexpressions to replace Vars referencing the
pulled-up subquery. Also, this means that extract_lateral_references must
be unsurprised at encountering lateral PlaceHolderVars, since such might be
created when pulling up a subquery that's underneath an outer join with
respect to the lateral reference.
Re-allow subquery pullup for LATERAL subqueries, except when the subquery
is below an outer join and contains lateral references to relations outside
that outer join. If we pull up in such a case, we risk introducing lateral
cross-references into outer joins' ON quals, which is something the code is
entirely unprepared to cope with right now; and I'm not sure it'll ever be
worth coping with.
Support lateral refs in VALUES (this seems to be the only additional path
type that needs such support as a consequence of re-allowing subquery
pullup).
Put in a slightly hacky fix for joinpath.c's refusal to consider
parameterized join paths even when there cannot be any unparameterized
ones. This was causing "could not devise a query plan for the given query"
failures in queries involving more than two FROM items.
Put in an even more hacky fix for distribute_qual_to_rels() being unhappy
with join quals that contain references to rels outside their syntactic
scope; which is to say, disable that test altogether. Need to think about
how to preserve some sort of debugging cross-check here, while not
expending more cycles than befits a debugging cross-check.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
We made use of the ROWS estimate for set-returning functions used in FROM,
but not for those used in SELECT targetlists; which is a bit of an
oversight considering there are common usages that require the latter
approach. Improve that. (I had initially thought it might be worth
folding this into cost_qual_eval, but after investigation concluded that
that wouldn't be very helpful, so just do it separately.) Per complaint
from David Johnston.
Back-patch to 9.2, but not further, for fear of destabilizing plan choices
in existing releases.
The callers of UtilityContainsQuery want it to return a non-utility Query
if it returns anything at all. However, since we made CREATE TABLE
AS/SELECT INTO into a utility command instead of a variant of SELECT,
a command like "EXPLAIN SELECT INTO" results in two nested utility
statements. So what we need UtilityContainsQuery to do is drill down
to the bottom non-utility Query.
I had thought of this possibility in setrefs.c, and fixed it there by
looping around the UtilityContainsQuery call; but overlooked that the call
sites in plancache.c have a similar issue. In those cases it's
notationally inconvenient to provide an external loop, so let's redefine
UtilityContainsQuery as recursing down to a non-utility Query instead.
Noted by Rushabh Lathia. This is a somewhat cleaned-up version of his
proposed patch.
setrefs.c failed to do "rtoffset" adjustment of Vars in RETURNING lists,
which meant they were left with the wrong varnos when the RETURNING list
was in a subquery. That was never possible before writable CTEs, of
course, but now it's broken. The executor fails to notice any problem
because ExecEvalVar just references the ecxt_scantuple for any normal
varno; but EXPLAIN breaks when the varno is wrong, as illustrated in a
recent complaint from Bartosz Dmytrak.
Since the eventual rtoffset of the subquery is not known at the time
we are preparing its plan node, the previous scheme of executing
set_returning_clause_references() at that time cannot handle this
adjustment. Fortunately, it turns out that we don't really need to do it
that way, because all the needed information is available during normal
setrefs.c execution; we just have to dig it out of the ModifyTable node.
So, do that, and get rid of the kluge of early setrefs processing of
RETURNING lists. (This is a little bit of a cheat in the case of inherited
UPDATE/DELETE, because we are not passing a "root" struct that corresponds
exactly to what the subplan was built with. But that doesn't matter, and
anyway this is less ugly than early setrefs processing was.)
Back-patch to 9.1, where the problem became possible to hit.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
Add a queryId field to Query and PlannedStmt. This is not used by the
core backend, except for being copied around at appropriate times.
It's meant to allow plug-ins to track a particular query forward from
parse analysis to execution.
The queryId is intentionally not dumped into stored rules (and hence this
commit doesn't bump catversion). You could argue that choice either way,
but it seems better that stored rule strings not have any dependency
on plug-ins that might or might not be present.
Also, add a post_parse_analyze_hook that gets invoked at the end of
parse analysis (but only for top-level analysis of complete queries,
not cases such as analyzing a domain's default-value expression).
This is mainly meant to be used to compute and assign a queryId,
but it could have other applications.
Peter Geoghegan
For some reason, in the original coding of the PlaceHolderVar mechanism
I had supposed that PlaceHolderVars couldn't propagate into subqueries.
That is of course entirely possible. When it happens, we need to treat
an outer-level PlaceHolderVar much like an outer Var or Aggref, that is
SS_replace_correlation_vars() needs to replace the PlaceHolderVar with
a Param, and then when building the finished SubPlan we have to provide
the PlaceHolderVar expression as an actual parameter for the SubPlan.
The handling of the contained expression is a bit delicate but it can be
treated exactly like an Aggref's expression.
In addition to the missing logic in subselect.c, prepjointree.c was failing
to search subqueries for PlaceHolderVars that need their relids adjusted
during subquery pullup. It looks like everyplace else that touches
PlaceHolderVars got it right, though.
Per report from Mark Murawski. In 9.1 and HEAD, queries affected by this
oversight would fail with "ERROR: Upper-level PlaceHolderVar found where
not expected". But in 9.0 and 8.4, you'd silently get possibly-wrong
answers, since the value transmitted into the subquery wouldn't go to null
when it should.
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
In commit 57664ed25e I tried to fix a bug
reported by Teodor Sigaev by making non-simple-Var output columns distinct
(by wrapping their expressions with dummy PlaceHolderVar nodes). This did
not work too well. Commit b28ffd0fcc fixed
some ensuing problems with matching to child indexes, but per a recent
report from Claus Stadler, constraint exclusion of UNION ALL subqueries was
still broken, because constant-simplification didn't handle the injected
PlaceHolderVars well either. On reflection, the original patch was quite
misguided: there is no reason to expect that EquivalenceClass child members
will be distinct. So instead of trying to make them so, we should ensure
that we can cope with the situation when they're not.
Accordingly, this patch reverts the code changes in the above-mentioned
commits (though the regression test cases they added stay). Instead, I've
added assorted defenses to make sure that duplicate EC child members don't
cause any problems. Teodor's original problem ("MergeAppend child's
targetlist doesn't match MergeAppend") is addressed more directly by
revising prepare_sort_from_pathkeys to let the parent MergeAppend's sort
list guide creation of each child's sort list.
In passing, get rid of add_sort_column; as far as I can tell, testing for
duplicate sort keys at this stage is dead code. Certainly it doesn't
trigger often enough to be worth expending cycles on in ordinary queries.
And keeping the test would've greatly complicated the new logic in
prepare_sort_from_pathkeys, because comparing pathkey list entries against
a previous output array requires that we not skip any entries in the list.
Back-patch to 9.1, like the previous patches. The only known issue in
this area that wasn't caused by the ill-advised previous patches was the
MergeAppend planning failure, which of course is not relevant before 9.1.
It's possible that we need some of the new defenses against duplicate child
EC entries in older branches, but until there's some clear evidence of that
I'm going to refrain from back-patching further.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
Now that cache invalidation callbacks get only a hash value, and not a
tuple TID (per commits 632ae6829f and
b5282aa893), the only way they can restrict
what they invalidate is to know what the hash values mean. setrefs.c was
doing this via a hard-wired assumption but that seems pretty grotty, and
it'll only get worse as more cases come up. So let's expose a calculation
function that takes the same parameters as SearchSysCache. Per complaint
from Marko Kreen.
The original API specification only allowed an FDW to create a single
access path, which doesn't seem like a terribly good idea in hindsight.
Instead, move the responsibility for building the Path node and calling
add_path() into the FDW's PlanForeignScan function. Now, it can do that
more than once if appropriate. There is no longer any need for the
transient FdwPlan struct, so get rid of that.
Etsuro Fujita, Shigeru Hanada, Tom Lane
The hstore and json datatypes both have record-conversion functions that
pay attention to column names in the composite values they're handed.
We used to not worry about inserting correct field names into tuple
descriptors generated at runtime, but given these examples it seems
useful to do so. Observe the nicer-looking results in the regression
tests whose results changed.
catversion bump because there is a subtle change in requirements for stored
rule parsetrees: RowExprs from ROW() constructs now have to include field
names.
Andrew Dunstan and Tom Lane
In commit 57664ed25e, I made the planner
wrap non-simple-variable outputs of appendrel children (IOW, child SELECTs
of UNION ALL subqueries) inside PlaceHolderVars, in order to solve some
issues with EquivalenceClass processing. However, this means that any
upper-level WHERE clauses mentioning such outputs will now contain
PlaceHolderVars after they're pushed down into the appendrel child,
and that prevents indxpath.c from recognizing that they could be matched
to index expressions. To fix, add explicit stripping of PlaceHolderVars
from index operands, same as we have long done for RelabelType nodes.
Add a regression test covering both this and the plain-UNION case (which
is a totally different code path, but should also be able to do it).
Per bug #6416 from Matteo Beccati. Back-patch to 9.1, same as the
previous change.
Formerly we passed an empty list to each per-child-table invocation of
grouping_planner, and then merged the results into the global list.
However, that fails if there's a CTE attached to the statement, because
create_ctescan_plan uses the list to find the plan referenced by a CTE
reference; so it was unable to find any CTEs attached to the outer UPDATE
or DELETE. But there's no real reason not to use the same list throughout
the process, and doing so is simpler and faster anyway.
Per report from Josh Berkus of "could not find plan for CTE" failures.
Back-patch to 9.1 where we added support for WITH attached to UPDATE or
DELETE. Add some regression test cases, too.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
In commit e2c2c2e8b1 I made use of nested
list structures to show which clauses went with which index columns, but
on reflection that's a data structure that only an old-line Lisp hacker
could love. Worse, it adds unnecessary complication to the many places
that don't much care which clauses go with which index columns. Revert
to the previous arrangement of flat lists of clauses, and instead add a
parallel integer list of column numbers. The places that care about the
pairing can chase both lists with forboth(), while the places that don't
care just examine one list the same as before.
The only real downside to this is that there are now two more lists that
need to be passed to amcostestimate functions in case they care about
column matching (which btcostestimate does, so not passing the info is not
an option). Rather than deal with 11-argument amcostestimate functions,
pass just the IndexPath and expect the functions to extract fields from it.
That gets us down to 7 arguments which is better than 11, and it seems
more future-proof against likely additions to the information we keep
about an index path.
It's potentially useful for an index to repeat the same indexable column
or expression in multiple index columns, if the columns have different
opclasses. (If they share opclasses too, the duplicate column is pretty
useless, but nonetheless we've allowed such cases since 9.0.) However,
the planner failed to cope with this, because createplan.c was relying on
simple equal() matching to figure out which index column each index qual
is intended for. We do have that information available upstream in
indxpath.c, though, so the fix is to not flatten the multi-level indexquals
list when putting it into an IndexPath. Then we can rely on the sublist
structure to identify target index columns in createplan.c. There's a
similar issue for index ORDER BYs (the KNNGIST feature), so introduce a
multi-level-list representation for that too. This adds a bit more
representational overhead, but we might more or less buy that back by not
having to search for matching index columns anymore in createplan.c;
likewise btcostestimate saves some cycles.
Per bug #6351 from Christian Rudolph. Likely symptoms include the "btree
index keys must be ordered by attribute" failure shown there, as well as
"operator MMMM is not a member of opfamily NNNN".
Although this is a pre-existing problem that can be demonstrated in 9.0 and
9.1, I'm not going to back-patch it, because the API changes in the planner
seem likely to break things such as index plugins. The corner cases where
this matters seem too narrow to justify possibly breaking things in a minor
release.
Add PlaceHolderVar wrappers as needed to make UNION ALL sub-select output
expressions appear non-constant and distinct from each other. This makes
the world safe for add_child_rel_equivalences to do what it does. Before,
it was possible for that function to add identical expressions to different
EquivalenceClasses, which logically should imply merging such ECs, which
would be wrong; or to improperly add a constant to an EquivalenceClass,
drastically changing its behavior. Per report from Teodor Sigaev.
The only currently known consequence of this bug is "MergeAppend child's
targetlist doesn't match MergeAppend" planner failures in 9.1 and later.
I am suspicious that there may be other failure modes that could affect
older release branches; but in the absence of any hard evidence, I'll
refrain from back-patching further than 9.1.
If we use a PlaceHolderVar from the outer relation in an inner indexscan,
we need to reference the PlaceHolderVar as such as the value to be passed
in from the outer relation. The previous code effectively tried to
reconstruct the PHV from its component expression, which doesn't work since
(a) the Vars therein aren't necessarily bubbled up far enough, and (b) it
would be the wrong semantics anyway because of the possibility that the PHV
is supposed to have gone to null at some point before the current join.
Point (a) led to "variable not found in subplan target list" planner
errors, but point (b) would have led to silently wrong answers.
Per report from Roger Niederland.
If the right-hand side of a semijoin is unique, then we can treat it like a
normal join (or another way to say that is: we don't need to explicitly
unique-ify the data before doing it as a normal join). We were recognizing
such cases when the RHS was a sub-query with appropriate DISTINCT or GROUP
BY decoration, but there's another way: if the RHS is a plain relation with
unique indexes, we can check if any of the indexes prove the output is
unique. Most of the infrastructure for that was there already in the join
removal code, though I had to rearrange it a bit. Per reflection about a
recent example in pgsql-performance.
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
In commit c1d9579dd8, I changed things so
that the output of the Agg node that feeds the window functions would not
list any ungrouped Vars directly. Formerly, for example, the Agg tlist
might have included both "x" and "sum(x)", which is not really valid if
"x" isn't a grouping column. If we then had a window function ordering on
something like "sum(x) + 1", prepare_sort_from_pathkeys would find no exact
match for this in the Agg tlist, and would conclude that it must recompute
the expression. But it would break the expression down to just the Var
"x", which it would find in the tlist, and then rebuild the ORDER BY
expression using a reference to the subplan's "x" output. Now, after the
above-referenced changes, "x" isn't in the Agg tlist if it's not a grouping
column, so that prepare_sort_from_pathkeys fails with "could not find
pathkey item to sort", as reported by Bricklen Anderson.
The fix is to not break down Aggrefs into their component parts, but just
treat them as irreducible expressions to be sought in the subplan tlist.
This is definitely OK for the use with respect to window functions in
grouping_planner, since it just built the tlist being used on the same
basis. AFAICT it is safe for other uses too; most of the other call sites
couldn't encounter Aggrefs anyway.
The constraint exclusion feature checks for contradictions among scan
restriction clauses, as well as contradictions between those clauses and a
table's CHECK constraints. The first aspect of this testing can be useful
for non-table relations (such as subqueries or functions-in-FROM), but the
feature was coded with only the CHECK case in mind so we were applying it
only to plain-table RTEs. Move the relation_excluded_by_constraints call
so that it is applied to all RTEs not just plain tables. With the default
setting of constraint_exclusion this results in no extra work, but with
constraint_exclusion = ON we will detect optimizations that we missed
before (at the cost of more planner cycles than we expended before).
Per a gripe from Gunnlaugur Þór Briem. Experimentation with
his example also showed we were not being very bright about the case where
constraint exclusion is proven within a subquery within UNION ALL, so tweak
the code to allow set_append_rel_pathlist to recognize such cases.
Formerly, set_subquery_pathlist and other creators of plans for subqueries
saved only the rangetable and rowMarks lists from the lower-level
PlannerInfo. But there's no reason not to remember the whole PlannerInfo,
and indeed this turns out to simplify matters in a number of places.
The immediate reason for doing this was so that the subroot will still be
accessible when we're trying to extract column statistics out of an
already-planned subquery. But now that I've done it, it seems like a good
code-beautification effort in its own right.
I also chose to get rid of the transient subrtable and subrowmark fields in
SubqueryScan nodes, in favor of having setrefs.c look up the subquery's
RelOptInfo. That required changing all the APIs in setrefs.c to pass
PlannerInfo not PlannerGlobal, which was a large but quite mechanical
transformation.
One side-effect not foreseen at the beginning is that this finally broke
inheritance_planner's assumption that replanning the same subquery RTE N
times would necessarily give interchangeable results each time. That
assumption was always pretty risky, but now we really have to make a
separate RTE for each instance so that there's a place to carry the
separate subroots.
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple. Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.
Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
A PlaceHolderVar's expression might contain another, lower-level
PlaceHolderVar. If the outer PlaceHolderVar is used, the inner one
certainly will be also, and so we have to make sure that both of them get
into the placeholder_list with correct ph_may_need values during the
initial pre-scan of the query (before deconstruct_jointree starts).
We did this correctly for PlaceHolderVars appearing in the query quals,
but overlooked the issue for those appearing in the top-level targetlist;
with the result that nested placeholders referenced only in the targetlist
did not work correctly, as illustrated in bug #6154.
While at it, add some error checking to find_placeholder_info to ensure
that we don't try to create new placeholders after it's too late to do so;
they have to all be created before deconstruct_jointree starts.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
If a Var was used only in a GROUP BY expression, the previous
implementation would include the Var by itself (as well as the expression)
in the generated targetlist. This wouldn't affect the efficiency of the
scan/join part of the plan at all, but it could result in passing
unnecessarily-wide rows through sorting and grouping steps. It turns out
to take only a little more code, and not noticeably more time, to generate
a tlist without such redundancy, so let's do that. Per a recent gripe from
HarmeekSingh Bedi.
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
The existence of a btree opclass accepting composite types caused us to
assume that every composite type is sortable. This isn't true of course;
we need to check if the column types are all sortable. There was logic
for this for the case of array comparison (ie, check that the element
type is sortable), but we missed the point for rowtypes. Per Teodor's
report of an ANALYZE failure for an unsortable composite type.
Rather than just add some more ad-hoc logic for this, I moved knowledge of
the issue into typcache.c. The typcache will now only report out array_eq,
record_cmp, and friends as usable operators if the array or composite type
will work with those functions.
Unfortunately we don't have enough info to do this for anonymous RECORD
types; in that case, just assume it will work, and take the runtime failure
as before if it doesn't.
This patch might be a candidate for back-patching at some point, but
given the lack of complaints from the field, I'd rather just test it in
HEAD for now.
Note: most of the places touched in this patch will need further work
when we get around to supporting hashing of record types.
After finding an EXISTS or ANY sub-select that can be converted to a
semi-join or anti-join, we should recurse into the body of the sub-select.
This allows cases such as EXISTS-within-EXISTS to be optimized properly.
The original coding would leave the lower sub-select as a SubLink, which
is no better and often worse than what we can do with a join. Per example
from Wayne Conrad.
Back-patch to 8.4. There is a related issue in older versions' handling
of pull_up_IN_clauses, but they're lame enough anyway about the whole area
that it seems not worth the extra work to try to fix.
The previous coding failed to account properly for the costs of evaluating
the input expressions of aggregates and window functions, as seen in a
recent gripe from Claudio Freire. (I said at the time that it wasn't
counting these costs at all; but on closer inspection, it was effectively
charging these costs once per output tuple. That is completely wrong for
aggregates, and not exactly right for window functions either.)
There was also a hard-wired assumption that aggregates and window functions
had procost 1.0, which is now fixed to respect the actual cataloged costs.
The costing of WindowAgg is still pretty bogus, since it doesn't try to
estimate the effects of spilling data to disk, but that seems like a
separate issue.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
The original coding assumed that such a case represents caller error, but
actually get_relation_info will omit generating an IndexOptInfo for any
index it thinks is unsafe to use. Therefore, handle this case by returning
"true" to indicate that a seqscan-and-sort is the preferred way to
implement the CLUSTER operation. New bug in 9.1, no backpatch needed.
Per bug #5985 from Daniel Grace.
Per spec we ought to apply select_common_collation() across the expressions
in each column of the VALUES table. The original coding was just taking
the first row and assuming it was representative.
This patch adds a field to struct RangeTblEntry to carry the resolved
collations, so initdb is forced for changes in stored rule representation.
I'm not sure these have any non-cosmetic implications, but I'm not sure
they don't, either. In particular, ensure the CaseTestExpr generated
by transformAssignmentIndirection to represent the base target column
carries the correct collation, because parse_collate.c won't fix that.
Tweak lsyscache.c API so that we can get the appropriate collation
without an extra syscache lookup.
In nearly all cases, the caller already knows the correct collation, and
in a number of places, the value the caller has handy is more correct than
the default for the type would be. (In particular, this patch makes it
significantly less likely that eval_const_expressions will result in
changing the exposed collation of an expression.) So an internal lookup
is both expensive and wrong.
Instead of playing cute games with pathkeys, just build a direct
representation of the intended sub-select, and feed it through
query_planner to get a Path for the index access. This is a bit slower
than 9.1's previous method, since we'll duplicate most of the overhead of
query_planner; but since the whole optimization only applies to rather
simple single-table queries, that probably won't be much of a problem in
practice. The advantage is that we get to do the right thing when there's
a partial index that needs the implicit IS NOT NULL clause to be usable.
Also, although this makes planagg.c be a bit more closely tied to the
ordering of operations in grouping_planner, we can get rid of some coupling
to lower-level parts of the planner. Per complaint from Marti Raudsepp.
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
Flattening of subquery range tables during setrefs.c could lead to the
rangetable indexes in PlanRowMark nodes not matching up with the column
names previously assigned to the corresponding resjunk ctid (resp. tableoid
or wholerow) columns. Typical symptom would be either a "cannot extract
system attribute from virtual tuple" error or an Assert failure. This
wasn't a problem before 9.0 because we didn't support FOR UPDATE below the
top query level, and so the final flattening could never renumber an RTE
that was relevant to FOR UPDATE. Fix by using a plan-tree-wide unique
number for each PlanRowMark to label the associated resjunk columns, so
that the number need not change during flattening.
Per report from David Johnston (though I'm darned if I can see how this got
past initial testing of the relevant code). Back-patch to 9.0.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
This reverts commit d1001a78ce of 2010-12-05,
which was broken as reported by Jeff Davis. The problem is that the
individual planning steps may have side-effects on substructures of
PlannerGlobal, not only the current PlannerInfo root. Arranging to keep
all such side effects in the main planning context is probably possible,
but it would change this from a quick local hack into a wide-ranging and
rather fragile endeavor. Which it's not worth.
In an inherited UPDATE/DELETE, each target table has its own subplan,
because it might have a column set different from other targets. This
means that the resjunk columns we add to support EvalPlanQual might be
at different physical column numbers in each subplan. The EvalPlanQual
rewrite I did for 9.0 failed to account for this, resulting in possible
misbehavior or even crashes during concurrent updates to the same row,
as seen in a recent report from Gordon Shannon. Revise the data structure
so that we track resjunk column numbers separately for each subplan.
I also chose to move responsibility for identifying the physical column
numbers back to executor startup, instead of assuming that numbers derived
during preprocess_targetlist would stay valid throughout subsequent
massaging of the plan. That's a bit slower, so we might want to consider
undoing it someday; but it would complicate the patch considerably and
didn't seem justifiable in a bug fix that has to be back-patched to 9.0.
This is advantageous first because it allows us to hash the smaller table
regardless of the outer-join type, and second because hash join can be more
flexible than merge join in dealing with arbitrary join quals in a FULL
join. For merge join all the join quals have to be mergejoinable, but hash
join will work so long as there's at least one hashjoinable qual --- the
others can be any condition. (This is true essentially because we don't
keep per-inner-tuple match flags in merge join, while hash join can do so.)
To do this, we need a has-it-been-matched flag for each tuple in the
hashtable, not just one for the current outer tuple. The key idea that
makes this practical is that we can store the match flag in the tuple's
infomask, since there are lots of bits there that are of no interest for a
MinimalTuple. So we aren't increasing the size of the hashtable at all for
the feature.
To write this without turning the hash code into even more of a pile of
spaghetti than it already was, I rewrote ExecHashJoin in a state-machine
style, similar to ExecMergeJoin. Other than that decision, it was pretty
straightforward.
Avoid eating quite so much memory for large inheritance trees, by
reclaiming the space used by temporary copies of the original parsetree and
range table, as well as the workspace needed during planning. The cost is
needing to copy the finished plan trees out of the child memory context.
Although this looks like it ought to slow things down, my testing shows
it actually is faster, apparently because fewer interactions with malloc()
are needed and/or we can do the work within a more readily cacheable amount
of memory. That result might be platform-dependent, but I'll take it.
Per a gripe from John Papandriopoulos, in which it was pointed out that the
memory consumption actually grew as O(N^2) for sufficiently many child
tables, since we were creating N copies of the N-element range table.
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
As per the ancient comment for set_rel_width, it really wasn't much good
for relations that aren't plain tables: it would never find any stats and
would always fall back on datatype-based estimates, which are often pretty
silly. Fix that by copying up width estimates from the subquery planning
process.
At some point we might want to do this for CTEs too, but that would be a
significantly more invasive patch because the sub-PlannerInfo is no longer
accessible by the time it's needed. I refrained from doing anything about
that, partly for fear of breaking the unmerged CTE-related patches.
In passing, also generate less bogus width estimates for whole-row Vars.
Per a gripe from Jon Nelson.
Fix things so that top-N sorting can be used in child Sort nodes of a
MergeAppend node, when there is a LIMIT and no intervening joins or
grouping. Actually doing this on the executor side isn't too bad,
but it's a bit messier to get the planner to cost it properly.
Per gripe from Robert Haas.
In passing, fix an oversight in the original top-N-sorting patch:
query_planner should not assume that a LIMIT can be used to make an
explicit sort cheaper when there will be grouping or aggregation in
between. Possibly this should be back-patched, but I'm not sure the
mistake is serious enough to be a real problem in practice.
Formerly, we could convert a UNION ALL structure inside a subquery-in-FROM
into an appendrel, as a side effect of pulling up the subquery into its
parent; but top-level UNION ALL always caused use of plan_set_operations().
That didn't matter too much because you got an Append-based plan either
way. However, now that the appendrel code can do things with MergeAppend,
it's worthwhile to hack up the top-level case so it also uses appendrels.
This is a bit of a stopgap; but going much further than this will require
a major rewrite of the planner's set-operations support, which I'm not
prepared to undertake now. For the moment let's grab the low-hanging fruit.
Per my recent proposal, get rid of all the direct inspection of indexes
and manual generation of paths in planagg.c. Instead, set up
EquivalenceClasses for the aggregate argument expressions, and let the
regular path generation logic deal with creating paths that can satisfy
those sort orders. This makes planagg.c a bit more visible to the rest
of the planner than it was originally, but the approach is basically a lot
cleaner than before. A major advantage of doing it this way is that we get
MIN/MAX optimization on inheritance trees (using MergeAppend of indexscans)
practically for free, whereas in the old way we'd have had to add a whole
lot more duplicative logic.
One small disadvantage of this approach is that MIN/MAX aggregates can no
longer exploit partial indexes having an "x IS NOT NULL" predicate, unless
that restriction or something that implies it is specified in the query.
The previous implementation was able to use the added "x IS NOT NULL"
condition as an extra predicate proof condition, but in this version we
rely entirely on indexes that are considered usable by the main planning
process. That seems a fair tradeoff for the simplicity and functionality
gained.
The core of this patch is hash_array() and associated typcache
infrastructure, which works just about exactly like the existing support
for array comparison.
In addition I did some work to ensure that the planner won't think that an
array type is hashable unless its element type is hashable, and similarly
for sorting. This includes adding a datatype parameter to op_hashjoinable
and op_mergejoinable, and adding an explicit "hashable" flag to
SortGroupClause. The lack of a cross-check on the element type was a
pre-existing bug in mergejoin support --- but it didn't matter so much
before, because if you couldn't sort the element type there wasn't any good
alternative to failing anyhow. Now that we have the alternative of hashing
the array type, there are cases where we can avoid a failure by being picky
at the planner stage, so it's time to be picky.
The issue of exactly how to combine the per-element hash values to produce
an array hash is still open for discussion, but the rest of this is pretty
solid, so I'll commit it as-is.
Zoltan Boszormenyi exhibited a test case in which planning time was
dominated by construction of EquivalenceClasses and PathKeys that had no
actual relevance to the query (and in fact got discarded immediately).
This happened because we generated PathKeys describing the sort ordering of
every index on every table in the query, and only after that checked to see
if the sort ordering was relevant. The EC/PK construction code is O(N^2)
in the number of ECs, which is all right for the intended number of such
objects, but it gets out of hand if there are ECs for lots of irrelevant
indexes.
To fix, twiddle the handling of mergeclauses a little bit to ensure that
every interesting EC is created before we begin path generation. (This
doesn't cost anything --- in fact I think it's a bit cheaper than before
--- since we always eventually created those ECs anyway.) Then, if an
index column can't be found in any pre-existing EC, we know that that sort
ordering is irrelevant for the query. Instead of creating a useless EC,
we can just not build a pathkey for the index column in the first place.
The index will still be considered if it's useful for non-order-related
reasons, but we will think of its output as unsorted.
This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
The point of a PlaceHolderVar is to allow a non-strict expression to be
evaluated below an outer join, after which its value bubbles up like a Var
and can be forced to NULL when the outer join's semantics require that.
However, there was a serious design oversight in that, namely that we
didn't ensure that there was actually a correct place in the plan tree
to evaluate the placeholder :-(. It may be necessary to delay evaluation
of an outer join to ensure that a placeholder that should be evaluated
below the join can be evaluated there. Per recent bug report from Kirill
Simonov.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
The previous coding would decide that join removal was unsafe upon finding
a PlaceHolderVar that needed to be evaluated at the inner rel and then used
above the join. However, this fails to cover the case of PlaceHolderVars
that refer to both the inner rel and some other rels. Per bug report from
Andrus.
Poking around for remaining occurrences of CVS keyword strings, I came
across one that apparently reflects the use of a $Revision: ...$ string
in the original input data. Dunno why anybody would be using that in
an MTA's Received: lines, but there it is. Put it back to the way that
it was originally, according to inspection of the CVS repo.
In these cases a qual can get marked with the removable rel in its
required_relids, but this is just to schedule its evaluation correctly, not
because it really depends on the rel. We were assuming that, in effect,
we could throw away *all* quals so marked, which is nonsense. Tighten up
the logic to be a little more paranoid about which quals belong to the
outer join being considered for removal, and arrange for all quals that
don't belong to be updated so they will still get evaluated correctly.
Also fix another problem that happened to be exposed by this test case,
which was that make_join_rel() was failing to notice some cases where
a constant-false qual could be used to prove a join relation empty. If it's
a pushed-down constant false, then the relation is empty even if it's an
outer join, because the qual applies after the outer join expansion.
Per report from Nathan Grange. Back-patch into 9.0.
relation using the general PARAM_EXEC executor parameter mechanism, rather
than the ad-hoc kluge of passing the outer tuple down through ExecReScan.
The previous method was hard to understand and could never be extended to
handle parameters coming from multiple join levels. This patch doesn't
change the set of possible plans nor have any significant performance effect,
but it's necessary infrastructure for future generalization of the concept
of an inner indexscan plan.
ExecReScan's second parameter is now unused, so it's removed.
If the original IN operator is cross-type, for example int8 = int4,
we need to use int4 < int4 to sort the inner data and int4 = int4
to unique-ify it. We got the first part of that right, but tried to
use the original IN operator for the equality checks. Per bug #5472
from Vlad Romascanu.
Backpatch to 8.4, where the bug was introduced by the patch that unified
SortClause and GroupClause. I was able to take out a whole lot of on-the-fly
calls of get_equality_op_for_ordering_op(), but failed to realize that
I needed to put one back in right here :-(
Magnus Hagander
Robert Haas
Tom Lane
Andres Freund
Alvaro Herrera
Bruce Momjian
Stephen Frost
Heikki Linnakangas
Simon Riggs
Peter Eisentraut
Greg Stark
Noah Misch
Kevin Grittner