---------------------------------------------------------------------------
When you run 'ecpg --help' you get the following:
-t turn on autocommit of transactions
amongst the other options... Shouldn't this be OFF as per the
documentation?
Best regards, Lee.
--
Lee Kindness, Senior Software Engineer, lkindness@csl.co.uk
Update the list of recognized time zones.
Document the range of arguments allowed for SET TIME ZONE.
Still need to add info on other date/time symbols (e.g. "AM", "T")
and to freshen the docs on the date/time parsing rules.
Admin Guide. Move discussion of template databases out of footnotes
in CREATE DATABASE ref page and into a section of the Admin Guide.
Clean up various obsolete claims, do some copy-editing.
information about nulls and sort order.
This is based on information obtained from Peter Eisentraut and
Tom Lane on pgsql-hackers.
Please check my English and Docbook markup, as both are a second
language to me.
Rene Pijlman
transformAlterStmt() use these routines, instead of having lots of
duplicate (not to mention should-have-been-duplicate) code.
Adding a column with a CHECK constraint actually works now,
and the tests to reject unsupported DEFAULT and NOT NULL clauses
actually fire now. ALTER TABLE ADD PRIMARY KEY works, modulo
having to have created the column(s) NOT NULL already.
'aggname (aggtype)'. The old syntax 'aggname aggtype' is still accepted
for backwards compatibility. Fix pg_dump, which was actually broken for
most cases of user-defined aggregates. Clean up error messages associated
with these commands.
under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
CREATE RULE bad_rule_combination_1 AS
ON SELECT TO emp
DO INSTEAD
SELECT * FROM toyemp;
CREATE RULE bad_rule_combination_2 AS
ON SELECT TO toyemp
DO INSTEAD
SELECT * FROM emp;
Tatsuo Ishii
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
table creation time. Big deal you say - but this patch is the basis of the
next thing which is adding PRIMARY KEYs after table creation time. (Which
is currently impossible without twiddling catalogs)
Rundown
-------
* I have made the makeObjectName function of analyze.c non-static, and
exported it in analyze.h
* I have included analyze.h and defrem.h into command.c, to support
makingObjectNames and creating indices
* I removed the 'case CONSTR_PRIMARY' clause so that it properly fails and
says you can't add primary keys, rather than just doing nothing and
reporting nothing!!!
* I have modified the docs.
Algorithm
---------
* If name specified is null, search for a new valid constraint name. I'm
not sure if I should "lock" my generated name somehow tho - should I open
the relation before doing this step?
* Open relation in access exclusive mode
* Check that the constraint does not already exist
* Define the new index
* Warn if they're doubling up on an existing index
Christopher Kings-Lynne
occur unconditionally, even if the rule should otherwise execute
conditionally. This is more useful than giving an error, even though it's
not truly the correct behavior. Per today's pghackers discussion.
Client headers are no longer in a subdirectory, since they have been made
namespace-clean.
Internal libpq headers are in a private subdirectory.
Server headers are in a private subdirectory. pg_config has a new option
to point there.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
syntax for language names (instead of 'string').
createlang now handles the case where a second language uses the same call
handler as an already installed language (e.g., plperl/plperlu).
droplang now handles the reverse case, i.e., dropping a language where
the call handler is still used by another language. Moreover, droplang
can now be used to drop any user-defined language, not just the supplied
ones.
Don't hardcode the maximum accepted server version, use PG_VERSION instead.
Install a notice processor so notices are handled like error messages.
Word smithing.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
clauses are equal(), before trying to match them up using btree opclass
inference rules. This allows it to recognize many simple cases involving
non-btree operations, for example 'x IS NULL'. Clean up code a little.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
USER and ALTER USER to appear in any order, not only the fixed order
they used to be required to appear in.
Also, some changes from Tom Lane to create a FULL option for VACUUM;
it doesn't do anything yet, but I needed to change many of the same
files to make that happen, so now seemed like a good time.
in cases of qualified rules as well as unqualified ones. Tweak rules
test to avoid cluttering output with dummy SELECT results. Update
documentation to match code.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
Indicies: palm_buy_date_idx
palm_user_date_idx
Primary Key: palm_buyers_pkey
Unique Key: palm_buyers_username
Constraint: "$1" ((sex = 'M'::bpchar) OR (sex = 'F'::bpchar))
Note that check constraint name now shown as well. (Makes it a lot easier
to test inheritance support in ADD/DROP constraint :) )
Attached is a docs change for psql.
Christopher Kings
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
still looking at the best way to integrate Tom Vijlbrief's fixes
(insofar as they're still needed); would 7.2 be a suitable time for
incompatible API changes?
Jeroen
Changes:
(*) Introduced bool, true, false (replacing some int, 1, 0)
(*) Made some member functions const
(*) Documented GetIsNull()
(*) Marked DisplayTuples() and PrintTuples() as obsolescent; fixed possible
portability problem (assumed that NULL pointer equals all-zero bit pattern)
(*) PrintTuples(): renamed width parameter to fillAlign to conform with other
usage; fixed memory leak and compile issue w.r.t. field separator (should
also slightly improve performance)
(*) Fixed some minor compilation issues
(*) Moved "using namespace std;" out of headers, where they didn't belong; used
new (temporary) preprocessor macro PGSTD to do this
(*) Made ToString() static, removed unneeded memset(), made buffer size adapt
to sizeof(int)
(*) Made some constructors explicit
(*) Changed some const std::string & parameters to plain std::string
(*) Marked PgCursor::Cursor(std::string) as obsolescent (setter with same name
as getter--bad style)
(*) Renamed some paramaters previously named "string"
(*) Introduced size_type typedef for number of tuples in result set
(*) PgTransaction now supports re-opening after closing, and aborts if not
explicitly committed prior to destruction
J. T. Vermeulen
===================
In Notes:
Refer to CREATE FUNCTION for information on creating aggregate functions.
^^^^^^^^^^^^^^^^^^^
I assume it must read C function instead.
In Compatibility SQL/PSM:
SQL/PSM is a proposed standard.
We had that before: remove proposed.
drop_index.sgml:
================
<REFNAME>: Removes existing indexes from a database
as far as I can see index should be singular. The command description is
written as if only one index can be removed at a time. Interestingly
enough, in v7.0.2 it was in fact singular. Am I mistaken here?
drop_operator.sgml:
===================
In Outputs the arguments are referred to as type and type2, but the synopsis
and Inputs section these are left_type and right_type, respectively. Also,
oper is used in Outputs versus id in Inputs/Synopsis. In the translation I
follow the replaceables used in the Inputs/Synopsis part.
Frank Wegmann
===================
In Notes:
Refer to CREATE FUNCTION for information on creating aggregate functions.
^^^^^^^^^^^^^^^^^^^
I assume it must read C function instead.
Frank Wegmann
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
being ratified as yet. This is certainly no longer true, it wasn't
even true in Q2/1998 when I did a little research for Date's book.
SQL/PSM had been published on 1996-12-15 as ISO/IEC 9075:4. So you
might want to update that section.
Frank Wegmann
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
not all of them attached properly in the post I made a few minutes
ago. Please disregard those earlier files. The diffs in the tar file
replace them.
Pierce Tyler
option of CREATE DATABASE. In pg_regress, create regression database
from template0 to ensure that any installation-local cruft in template1
will not mess up the tests.
Add -l option to name log file. Set umask to 077.
Proper file descriptor redirection to allow postmaster to detach from
shell's process group.
Add -s option to turn off informational messages.
and revert documentation to describe the existing INHERITS clause
instead, per recent discussion in pghackers. Also fix implementation
of SQL_inheritance SET variable: it is not cool to look at this var
during the initial parsing phase, only during parse_analyze(). See
recent bug report concerning misinterpretation of date constants just
after a SET TIMEZONE command. gram.y really has to be an invariant
transformation of the query string to a raw parsetree; anything that
can vary with time must be done during parse analysis.
the first paragraph:
As an example, say we wish to find all the records that
are in the temperature range of other records. In
effect, we need to compare the temp_lo and temp_hi
attributes of each EMP instance to the temp_lo and
temp_hi attributes of all other EMP instances.
I believe that EMP should read WEATHER, as the example query that
follows joins WEATHER to itself.
EMP is often used in Oracle examples.
Regards,
Graham
Other RULE cleanups
ISO-compliant UNION/INTERSECT/EXCEPT. Revise discussion of rule
rewriter to reflect new subselect-in-FROM implementation of views.
Miscellaneous other cleanups.
value greater than one. The behavior this sought to disallow doesn't
seem any less confusing than the other behaviors of cached sequences.
Improve wording of some error messages, too.
Update documentation accordingly. Also add an explanation that
aborted transactions do not roll back their nextval() calls; this
seems to be a FAQ, so it ought to be mentioned here...
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
Make version.sgml the central place for updating version numbers in the
documentation. Document titles now contain the version number of the
release they belong to.
filelist.sgml is the central (and only) place to declare system entities
(i.e., sgml files). No longer a need to declare them in each document
header.
There is no longer any need to maintain duplicate chapter lists in
postgres.sgml and user/admin/etc.sgml, everything is build from the same
sources. Some parameter entities allow for different text to be included
when the integrated or a single doc set is generated, which eliminates the
problems that had caused this to fail in the past.
in pghackers list. Support for oldstyle internal functions is gone
(no longer needed, since conversion is complete) and pg_language entry
'internal' now implies newstyle call convention. pg_language entry
'newC' is gone; both old and newstyle dynamically loaded C functions
are now called language 'C'. A newstyle function must be identified
by an associated info routine. See src/backend/utils/fmgr/README.
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
as well allow DROP multiple INDEX, RULE, TYPE as well. Add missing
CommandCounterIncrement to DROP loop, which could cause trouble otherwise
with multiple DROP of items affecting same catalog entries. Try to
bring a little consistency to various error messages using 'does not exist',
'nonexistent', etc --- I standardized on 'does not exist' since that's
what the vast majority of the existing uses seem to be.
This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
that RAND_MAX applies to them, since it doesn't. Instead add a
config.h parameter MAX_RANDOM_VALUE. This is currently set at 2^31-1
but could be auto-configured if that ever proves necessary. Also fix
some outright bugs like calling srand() where srandom() is appropriate.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
option settings. Sort out SIGHUP vs BACKEND -- there is no total ordering
here, so make explicit checks. Add comments explaining all of this.
Removed permissions check on SHOW command.
Add examine_subclass to the game, rename to SQL_inheritance to fit the
official data model better. Adjust documentation.
Standalone backend needs to reset all options before it starts. To
facilitate that, have IsUnderPostmaster be set by the postmaster itself,
don't wait for the magic -p switch.
Also make sure that all environment variables and argv's survive
init_ps_display(). Use strdup where necessary.
Have initdb make configuration files (postgresql.conf, pg_hba.conf) mode
0600 -- having configuration files is no fun if you can't edit them.
entries now for int8 and network hash indexes. int24_ops and int42_ops
are gone. pg_opclass no longer contains multiple entries claiming to be
the default opclass for the same datatype. opr_sanity regress test
extended to catch errors like these in the future.
reference page to new configuration system. Big update to administrator's
guide, chapters Runtime environment, Client authentication, and User
management, the latter two were part of the old Security chapter.
16-Mar-00: trailing + or - is not part of the operator unless the operator
also contains characters not present in SQL92-defined operators. This
solves the 'X=-Y' problem without unduly constraining users' choice of
operator names --- in particular, no existing Postgres operator names
become invalid.
Also, remove processing of // comments, as agreed in the same thread.
after trying to resolve the item as an input-column name. This allows us
to be compliant with the SQL92 spec for queries that fall within the spec,
while still accepting the same out-of-spec queries as 6.5 did. You'll only
lose if there is an output column name that is the same as an input
column name, but doesn't refer to the same value. 7.0 will interpret
such a GROUP BY spec differently than 6.5 did. No way around that, because
6.5 was clearly not spec compliant.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
Initdb help correction
Changed end/abort to commit/rollback and changed related notices
Commented out way old printing functions in libpq
Fixed a typo in alter table / alter column
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
- Prevent permissions on indexes
- Instituted --enable-multibyte option and tweaked the MB build process where necessary
- initdb prompts for superuser password
* Let unprivileged users change their own passwords.
* The password is now an Sconst in the parser, which better reflects its text datatype and also
forces users to quote them.
* If your password is NULL you won't be written to the password file, meaning you can't connect
until you have a password set up (if you use password authentication).
* When you drop a user that owns a database you get an error. The database is not gone.
traced this back to what I believe is an error in the sgml file used to
generate this comment, found in pgsql/doc/src/sgml/ref/alter_table.sgml.
Stephen Birch
> > for them to actually set out and do it. Many new users are
> > of the not-so-knowledgable variety, and shell scripting isn't
> > something they want to undertake.
>
> Can someone modify the vacuumdb shell script to do that?
i tried it... it seems to work
neko@kredit.sth.sz
initdb. No more obscure dependencies on environment variables or paths.
It
now finds the templates and the right postgres itself (with cmd line
options as fallback). It also no longer depends on $USER (su safe), and
doesn't advertise that --username allows you to install the db as a
different user, since that doesn't work anyway. Also, recovery and
cleanup
on all errors. Consistent options, clearer documentation.
Please take a look at this and adopt it if you feel it's safe enough. I
have simulated all the stupid circumstances I could think of, but you
never know with shell scripts.
Oh yeah, you can give the postgres user a default password now.
--
Peter Eisentraut Sernanders väg 10:115
anywhere from zero to two TODO items.
* Allow flag to control COPY input/output of NULLs
I got this:
COPY table .... [ WITH NULL AS 'string' ]
which does what you'd expect. The default is \N, otherwise you can use
empty strings, etc. On Copy In this acts like a filter: every data item
that looks like 'string' becomes a NULL. Pretty straightforward.
This also seems to be related to
* Make postgres user have a password by default
If I recall this discussion correctly, the problem was actually that the
default password for the postgres (or any) user is in fact "\N", because
of the way copy is used. With this change, the file pg_pwd is copied out
with nulls as empty strings, so if someone doesn't have a password, the
password is just '', which one would expect from a new account. I don't
think anyone really wants a hard-coded default password.
Peter Eisentraut Sernanders väg 10:115
at all, and because of shell quoting rules this can't be fixed, so I put
in error messages to that end.
Also, calling create or drop database in a transaction block is not so
good either, because the file system mysteriously refuses to roll back rm
calls on transaction aborts. :) So I put in checks to see if a transaction
is in progress and signal an error.
Also I put the whole call in a transaction of its own to be able to roll
back changes to pg_database in case the file system operations fail.
The alternative location issues I posted recently were untouched, awaiting
the outcome of that discussion. Other than that, this should be much more
fool-proof now.
The docs I cleaned up as well.
Peter Eisentraut Sernanders väg 10:115
against the sources from one hour ago and contain all the portable and
up
to date stuff.
A few other CVS "householding" things you might want to take care of:
* Remove the src/bin/cleardbdir directory
* Remove the file src/bin/psql/sql_help.h from the repository, as it is
a derived file and is build by the release_prep.
Peter Eisentraut
them into the scripts dir. I also added a --list option to show already
installed languages.
This whole moving and renaming totally confused CVS and my checked out
copy got completely fried last night. When you apply the source patch,
please make sure that all the directories src/bin/{create|destroy}* as
well as vacuumdb, cleardbdir are gone and that all the scripts (7) are
in
scripts/.
Meanwhile I am still puzzled about what happened with the docs patch.
Because I don't know what you got now, the second attachment contains
the
files
ref/allfiles.sgml
ref/commands.sgml
ref/createlang.sgml
ref/droplang.sgml
doc/src/sgml/Makefile
Peter Eisentraut Sernanders väg 10:115
This one should work much better than the one I sent in previously. The
functionality is the same, but the patch was missing one file resulting
in
the compilation failing. The docs also received a minor fix.
Peter Eisentraut Sernanders väg 10:115
rate
it's better than what used to be there.
* Does proper SQL "host variable" substitution as pointed out by Andreas
Zeugwetter (thanks): select * from :foo; Also some changes in how ':'
and ';' are treated (escape with \ to send to backend). This does
_not_
affect the '::' cast operator, but perhaps others that contain : or ;
(but there are none right now).
* To show description with a <something> listing, append '?' to command
name, e.g., \df?. This seemed to be the convenient and logical
solution.
Or append a '+' to see more useless information, e.g., \df+.
* Fixed fflush()'ing bug pointed out by Jan during the regression test
discussion.
* Added LastOid variable. This ought to take care of TODO item "Add a
function to return the last inserted oid, for use in psql scripts"
(under CLIENTS)
E.g.,
insert into foo values(...);
insert into bar values(..., :LastOid);
\echo $LastOid
* \d command shows constraints, rules, and triggers defined on the table
(in addition to indices)
* Various fixes, optimizations, corrections
* Documentation update as well
Note: This now requires snprintf(), which, if necessary, is taken from
src/backend/port. This is certainly a little weird, but it should
suffice
until a source tree cleanup is done.
Enjoy.
--
Peter Eisentraut Sernanders väg 10:115
functions. One problem that I have encountered with the function
manager is that it does not allow the user to define type conversion
functions that convert between user types. For instance if mytype1,
mytype2, and mytype3 are three Postgresql user types, and if I wish to
define Postgresql conversion functions like
I run into problems, because the Postgresql dynamic loader would look
for a single link symbol, mytype3, for both pieces of object code. If
I just change the name of one of the Postgresql functions (to make the
symbols distinct), the automatic type conversion that Postgresql uses,
for example, when matching operators to arguments no longer finds the
type conversion function.
The solution that I propose, and have implemented in the attatched
patch extends the CREATE FUNCTION syntax as follows. In the first case
above I use the link symbol mytype2_to_mytype3 for the link object
that implements the first conversion function, and define the
Postgresql operator with the following syntax
The patch includes changes to the parser to include the altered
syntax, changes to the ProcedureStmt node in nodes/parsenodes.h,
changes to commands/define.c to handle the extra information in the AS
clause, and changes to utils/fmgr/dfmgr.c that alter the way that the
dynamic loader figures out what link symbol to use. I store the
string for the link symbol in the prosrc text attribute of the pg_proc
table which is currently unused in rows that reference dynamically
loaded
functions.
Bernie Frankpitt
No big deal; fixed lots of other markup at the same time.
Bigest change: make sure there is no whitespace
in front of <term> contents.
This will probably help the other output types too.
SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
^^^^ required
Also note that SET TRANSACTION ISOLATION LEVEL change
isolevel for _current_ transaction, in accordance with
standard, not for session (ALTER SESSION is used in Oracle,
but it's not implemented currently).
And I would don't mention SET XACTISOLEVEL TO ...
form at all.
Please update set.sgml - I failed to understand all these
SET TIME ZONE { '<REPLACEABLE CLASS="PARAMETER">
now.
for Vadim
elements prior to CREATEing new ones. It is under control of the -c
command line option (with the default being status quo).
The DROP TRIGGER portion still needs implementation. Anyone able to
help clarify what exactly the CREATE TRIGGER portion does so I can fix
this?
Again, I have tried this with tables/indexes/sequences, but do not
have other schema elements in my database. As a result, I am not 100%
convinced that I got the syntax correct in all cases (but think I did,
nonetheless). If anyone can check the other cases, I'd appreciate it.
Cheers,
Brook
[I added manual page and sgml additions for the new -c option.]
> > the standard distribution. It occurs when a trigger calling this
> > function recursively fires another trigger which calls the same
> > function. The calling check_foreign_key loses its plan informantion and
> > when it tries to use it the backend closes its channel. You can check it
> > with the sql script I am attaching below.
> > The solution to this is to do a find_plan again before executing it at
> > line 483 of refint.c.
> > Therefore two more lines should be added before line 483:
Anand Surelia