Reflecting an updated parameter value requires a server restart, which
was not mentioned in the documentation and in postgresql.conf.sample.
Reported-by: Thomas Poty
Discussion: https://postgr.es/m/15659-0cd812f13027a2d8@postgresql.org
Previously, floating-point output was done by rounding to a specific
decimal precision; by default, to 6 or 15 decimal digits (losing
information) or as requested using extra_float_digits. Drivers that
wanted exact float values, and applications like pg_dump that must
preserve values exactly, set extra_float_digits=3 (or sometimes 2 for
historical reasons, though this isn't enough for float4).
Unfortunately, decimal rounded output is slow enough to become a
noticable bottleneck when dealing with large result sets or COPY of
large tables when many floating-point values are involved.
Floating-point output can be done much faster when the output is not
rounded to a specific decimal length, but rather is chosen as the
shortest decimal representation that is closer to the original float
value than to any other value representable in the same precision. The
recently published Ryu algorithm by Ulf Adams is both relatively
simple and remarkably fast.
Accordingly, change float4out/float8out to output shortest decimal
representations if extra_float_digits is greater than 0, and make that
the new default. Applications that need rounded output can set
extra_float_digits back to 0 or below, and take the resulting
performance hit.
We make one concession to portability for systems with buggy
floating-point input: we do not output decimal values that fall
exactly halfway between adjacent representable binary values (which
would rely on the reader doing round-to-nearest-even correctly). This
is known to be a problem at least for VS2013 on Windows.
Our version of the Ryu code originates from
https://github.com/ulfjack/ryu/ at commit c9c3fb1979, but with the
following (significant) modifications:
- Output format is changed to use fixed-point notation for small
exponents, as printf would, and also to use lowercase 'e', a
minimum of 2 exponent digits, and a mandatory sign on the exponent,
to keep the formatting as close as possible to previous output.
- The output of exact midpoint values is disabled as noted above.
- The integer fast-path code is changed somewhat (since we have
fixed-point output and the upstream did not).
- Our project style has been largely applied to the code with the
exception of C99 declaration-after-statement, which has been
retained as an exception to our present policy.
- Most of upstream's debugging and conditionals are removed, and we
use our own configure tests to determine things like uint128
availability.
Changing the float output format obviously affects a number of
regression tests. This patch uses an explicit setting of
extra_float_digits=0 for test output that is not expected to be
exactly reproducible (e.g. due to numerical instability or differing
algorithms for transcendental functions).
Conversions from floats to numeric are unchanged by this patch. These
may appear in index expressions and it is not yet clear whether any
change should be made, so that can be left for another day.
This patch assumes that the only supported floating point format is
now IEEE format, and the documentation is updated to reflect that.
Code by me, adapting the work of Ulf Adams and other contributors.
References:
https://dl.acm.org/citation.cfm?id=3192369
Reviewed-by: Tom Lane, Andres Freund, Donald Dong
Discussion: https://postgr.es/m/87r2el1bx6.fsf@news-spur.riddles.org.uk
This value represents the default behavior of using the current
timeline. Previously, this was represented by an empty string.
(Before the removal of recovery.conf, this setting could not be chosen
explicitly but was used when recovery_target_timeline was not
mentioned at all.)
Discussion: https://www.postgresql.org/message-id/flat/6dd2c23a-4162-8469-410f-bfe146e28c0c@2ndquadrant.com/
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
This allows to set a lower log_min_duration_statement value without
incurring excessive log traffic (which reduces performance). This can
be useful to analyze workloads with lots of short queries.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing
Discussion: https://postgr.es/m/c30ee535-ee1e-db9f-fa97-146b9f62caed@anayrat.info
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Jonah Harris and Tom Lane
Discussion: https://postgr.es/m/7809.1541521180@sss.pgh.pa.us
Discussion: https://postgr.es/m/15479-ef0f4cc2fd995ca2@postgresql.org
Per discussion, JIT isn't quite mature enough to ship enabled-by-default.
I failed to resist the temptation to do a bunch of copy-editing on the
related documentation. Also, clean up some inconsistencies in which
section of config.sgml the JIT GUCs are documented in vs. what guc.c
and postgresql.config.sample had.
Discussion: https://postgr.es/m/20180914222657.mw25esrzbcnu6qlu@alap3.anarazel.de
PostgreSQL nowadays offers some kind of dynamic shared memory feature on
all supported platforms. Having the choice of "none" prevents us from
relying on DSM in core features. So this patch removes the choice of
"none".
Author: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
vacuum_cleanup_index_scale_factor was located in autovacuum group of
GUCs. However, it affects not only autovacuum, but also manually run
VACUUM. It appears that "client connection defaults" group of GUCs
is more appropriate for vacuum_cleanup_index_scale_factor, because
vacuum_*_age options are already located there.
Also, vacuum_cleanup_index_scale_factor was missed in
postgresql.conf.sample. So, add it there with appropriate comment.
Author: Masahiko Sawada with minor editorization by me
Discussion: https://postgr.es/m/CAD21AoArsoXMLKudXSKN679FRzs6oubEchM53bHwn8Tp%3D2boNg%40mail.gmail.com
This controls both plan-time and execution-time new-style partition
pruning. While finer-grain control is possible (maybe using an enum GUC
instead of boolean), there doesn't seem to be much need for that.
This new parameter controls partition pruning for all queries:
trivially, SELECT queries that affect partitioned tables are naturally
under its control since they are using the new technology. However,
while UPDATE/DELETE queries do not use the new code, we make the new GUC
control their behavior also (stealing control from
constraint_exclusion), because it is more natural, and it leads to a
more natural transition to the future in which those queries will also
use the new pruning code.
Constraint exclusion still controls pruning for regular inheritance
situations (those not involving partitioned tables).
Author: David Rowley
Review: Amit Langote, Ashutosh Bapat, Justin Pryzby, David G. Johnston
Discussion: https://postgr.es/m/CAKJS1f_0HwsxJG9m+nzU+CizxSdGtfe6iF_ykPYBiYft302DCw@mail.gmail.com
This provides infrastructure to allow JITed code to inline code
implemented in C. This e.g. can be postgres internal functions or
extension code.
This already speeds up long running queries, by allowing the LLVM
optimizer to optimize across function boundaries. The optimization
potential currently doesn't reach its full potential because LLVM
cannot optimize the FunctionCallInfoData argument fully away, because
it's allocated on the heap rather than the stack. Fixing that is
beyond what's realistic for v11.
To be able to do that, use CLANG to convert C code to LLVM bitcode,
and have LLVM build a summary for it. That bitcode can then be used to
to inline functions at runtime. For that the bitcode needs to be
installed. Postgres bitcode goes into $pkglibdir/bitcode/postgres,
extensions go into equivalent directories. PGXS has been modified so
that happens automatically if postgres has been compiled with LLVM
support.
Currently this isn't the fastest inline implementation, modules are
reloaded from disk during inlining. That's to work around an apparent
LLVM bug, triggering an apparently spurious error in LLVM assertion
enabled builds. Once that is resolved we can remove the superfluous
read from disk.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
If the partition keys of input relation are part of the GROUP BY
clause, all the rows belonging to a given group come from a single
partition. This allows aggregation/grouping over a partitioned
relation to be broken down * into aggregation/grouping on each
partition. This should be no worse, and often better, than the normal
approach.
If the GROUP BY clause does not contain all the partition keys, we can
still perform partial aggregation for each partition and then finalize
aggregation after appending the partial results. This is less certain
to be a win, but it's still useful.
Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series
of which this patch is a part was also reviewed and tested by Antonin
Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin
Knizhnik, Pascal Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
This commit introduces:
1) JIT provider abstraction, which allows JIT functionality to be
implemented in separate shared libraries. That's desirable because
it allows to install JIT support as a separate package, and because
it allows experimentation with different forms of JITing.
2) JITContexts which can be, using functions introduced in follow up
commits, used to emit JITed functions, and have them be cleaned up
on error.
3) The outline of a LLVM JIT provider, which will be fleshed out in
subsequent commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with architectural input from Jeff Davis
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
Split the "Authentication and Security" section into two separate
sections "Authentication" and "SSL". The latter part has gotten much
longer over time, and doesn't primarily have to do with authentication.
Also, the row_security parameter was inconsistently categorized, so
clean that up while we're here.
Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
A handful of settings, most notably shared_preload_libraries, were
just plain the wrong place compared to their assigned config_group
value in guc.c (and thus pg_settings). In other cases the names of
the sections in postgresql.conf.sample were mildly different from
the corresponding entries in config_group_names[]. Make it all
consistent.
Adrián Escoms, reviewed by me.
Discussion: http://postgr.es/m/CACksPC2veEmFRYqwYepWYO9U7aFhAx6sYq+WqjTyHw7uV=E=pw@mail.gmail.com
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
At the time replacement_sort_tuples was introduced, there were still
cases where replacement selection sort noticeably outperformed using
quicksort even for the first run. However, those cases seem to have
evaporated as a result of further improvements made since that time
(and perhaps also advances in CPU technology). So remove replacement
selection and the controlling GUC entirely. This makes tuplesort.c
noticeably simpler and probably paves the way for further
optimizations someone might want to do later.
Peter Geoghegan, with review and testing by Tomas Vondra and me.
Discussion: https://postgr.es/m/CAH2-WzmmNjG_K0R9nqYwMq3zjyJJK+hCbiZYNGhAy-Zyjs64GQ@mail.gmail.com
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAMxBoUyjOOautVozN6ofzym828aNrDjuCcOTcCquxjwS-L2hGQ@mail.gmail.com
This goes together with the changes made to enable replication on the
sending side by default (wal_level, max_wal_senders etc) by making the
receiving stadby node also enable it by default.
Huong Dangminh
This commit also does
- add REPLICATION_SUBSCRIBERS into config_group
- mark max_logical_replication_workers and max_sync_workers_per_subscription
as REPLICATION_SUBSCRIBERS parameters
- move those parameters into "Subscribers" section in postgresql.conf.sample
Author: Masahiko Sawada, Petr Jelinek and me
Reported-by: Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoAonSCoa=v=87ZO3vhfUZA1k_E2XRNHTt=xioWGUa+0ug@mail.gmail.com
Defaults match the fixed behavior of prior releases, but now DBAs
have better options to tune serializable workloads.
It might be nice to be able to set this per relation, but that part
will need to wait for another release.
Author: Dagfinn Ilmari Mannsåker
The previous default 'pg_log' might have indicated by its "pg_" prefix
that it is an internal system directory. The new default is more in
line with the typical naming of directories with user-facing log files.
Together with the renaming of pg_clog and pg_xlog, this should clear up
that difference.
Author: Andreas Karlsson <andreas@proxel.se>
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
When min_parallel_relation_size was added, the only supported type
of parallel scan was a parallel sequential scan, but there are
pending patches for parallel index scan, parallel index-only scan,
and parallel bitmap heap scan. Those patches introduce two new
types of complications: first, what's relevant is not really the
total size of the relation but the portion of it that we will scan;
and second, index pages and heap pages shouldn't necessarily be
treated in exactly the same way. Typically, the number of index
pages will be quite small, but that doesn't necessarily mean that
a parallel index scan can't pay off.
Therefore, we introduce min_parallel_table_scan_size, which works
out a degree of parallelism for scans based on the number of table
pages that will be scanned (and which is therefore equivalent to
min_parallel_relation_size for parallel sequential scans) and also
min_parallel_index_scan_size which can be used to work out a degree
of parallelism based on the number of index pages that will be
scanned.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KowGSYYVpd2qPpaPPA5R90r++QwDFbrRECTE9H_HvpOg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1+TnM4pXQbvn7OXqam+k_HZqb0ROZUMxOiL6DWJYCyYow@mail.gmail.com
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
This feature is also known as "quorum commit" especially in discussion
on pgsql-hackers.
This commit adds the following new syntaxes into synchronous_standby_names
GUC. By using FIRST and ANY keywords, users can specify the method to
choose synchronous standbys from the listed servers.
FIRST num_sync (standby_name [, ...])
ANY num_sync (standby_name [, ...])
The keyword FIRST specifies a priority-based synchronous replication
which was available also in 9.6 or before. This method makes transaction
commits wait until their WAL records are replicated to num_sync
synchronous standbys chosen based on their priorities.
The keyword ANY specifies a quorum-based synchronous replication
and makes transaction commits wait until their WAL records are
replicated to *at least* num_sync listed standbys. In this method,
the values of sync_state.pg_stat_replication for the listed standbys
are reported as "quorum". The priority is still assigned to each standby,
but not used in this method.
The existing syntaxes having neither FIRST nor ANY keyword are still
supported. They are the same as new syntax with FIRST keyword, i.e.,
a priorirty-based synchronous replication.
Author: Masahiko Sawada
Reviewed-By: Michael Paquier, Amit Kapila and me
Discussion: <CAD21AoAACi9NeC_ecm+Vahm+MMA6nYh=Kqs3KB3np+MBOS_gZg@mail.gmail.com>
Many thanks to the various individuals who were involved in
discussing and developing this feature.
Commit b460f5d669 -- at my suggestion --
increased the default value of max_worker_processes from 8 to 16, on
the theory that this would be harmless and convenient for users.
Unfortunately, this caused some buildfarm machines with low connection
limits to start failing, so apparently it's not harmless after all.
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
This value might not be to everyone's taste; in particular, some
people might prefer %t to %m, and others may want %u, %d, or other
fields. However, it's a vast improvement on the old default of ''.
Christoph Berg
This makes the parameter easier to extend, to support other password-based
authentication protocols than MD5. (SCRAM is being worked on.)
The GUC still accepts on/off as aliases for "md5" and "plain", although
we may want to remove those once we actually add support for another
password hash type.
Michael Paquier, reviewed by David Steele, with some further edits by me.
Discussion: <CAB7nPqSMXU35g=W9X74HVeQp0uvgJxvYOuA4A-A3M+0wfEBv-w@mail.gmail.com>
runtime.sgml used to contain a table of estimated shared memory consumption
rates for max_connections and some other GUCs. Commit 390bfc643 removed
that on the well-founded grounds that (a) we weren't maintaining the
entries well and (b) it no longer mattered so much once we got out from
under SysV shmem limits. But it missed that there were even-more-obsolete
versions of some of those numbers in comments in postgresql.conf.sample.
Remove those too. Back-patch to 9.3 where the aforesaid commit went in.
temp_file_limit is a per-process limit, not a per-session limit across
all cooperating parallel processes; change wording accordingly, per a
suggestion from Tom Lane.
Also, document under max_parallel_workers_per_gather the fact that each
process involved in a parallel query may use as many resources as a
separate session. Caveat emptor.
Per a complaint from Peter Geoghegan.
The main point of doing this is to allow the cutoff to be set very small,
even zero, to allow parallel-query behavior to be tested on relatively
small tables such as we typically use in the regression tests. But it
might be of use to users too. The number-of-workers scaling behavior in
create_plain_partial_paths() is pretty ad-hoc and subject to change, so
we won't expose anything about that, but the notion of not considering
parallel query at all for tables below size X seems reasonably stable.
Amit Kapila, per a suggestion from me
Discussion: <17170.1465830165@sss.pgh.pa.us>
While beneficial, both for throughput and average/worst case latency, in
a significant number of workloads, there are other workloads in which
backend_flush_after can cause significant performance regressions in
comparison to < 9.6 releases. The regression is most likely when the hot
data set is bigger than shared buffers, but significantly smaller than
the operating system's page cache.
I personally think that the benefit of enabling backend flush control is
considerably bigger than the potential downsides, but a fair argument
can be made that not regressing is more important than improving
performance/latency. As the latter is the consensus, change the default
to 0.
The other settings introduced in 428b1d6b2 do not have the same
potential for regressions, so leave them enabled.
Benchmarks leading up to changing the default have been performed by
Mithun Cy, Ashutosh Sharma and Robert Haas.
Discussion: CAD__OuhPmc6XH=wYRm_+Q657yQE88DakN4=Ybh2oveFasHkoeA@mail.gmail.com
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
Change max_parallel_degree default from 0 to 2. It is possible that
this is not a good idea, or that we should go with 1 worker rather
than 2, but we won't find out without trying it. Along the way,
reword the documentation for max_parallel_degree a little bit to
hopefully make it more clear.
Discussion: 20160420174631.3qjjhpwsvvx5bau5@alap3.anarazel.de
Several issues:
1) checkpoint_flush_after doc and code disagreed about the default
2) new GUCs were missing from postgresql.conf.sample
3) Outdated source-code comment about bgwriter_flush_after's default
4) Sub-optimal categories assigned to new GUCs
5) Docs suggested backend_flush_after is PGC_SIGHUP, but it's PGC_USERSET.
6) Spell out int as integer in the docs, as done elsewhere
Reported-By: Magnus Hagander, Fujii Masao
Discussion: CAHGQGwETyTG5VYQQ5C_srwxWX7RXvFcD3dKROhvAWWhoSBdmZw@mail.gmail.com
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
We still use replacement selection for the first run of the sort only
and only when the number of tuples is relatively small. Otherwise,
the first run, and subsequent runs in all cases, are produced using
quicksort. This tends to be faster except perhaps for very small
amounts of working memory.
Peter Geoghegan, reviewed by Tomas Vondra, Jeff Janes, Mithun Cy,
Greg Stark, and me.
Previously synchronous replication offered only the ability to confirm
that all changes made by a transaction had been transferred to at most
one synchronous standby server.
This commit extends synchronous replication so that it supports multiple
synchronous standby servers. It enables users to consider one or more
standby servers as synchronous, and increase the level of transaction
durability by ensuring that transaction commits wait for replies from
all of those synchronous standbys.
Multiple synchronous standby servers are configured in
synchronous_standby_names which is extended to support new syntax of
'num_sync ( standby_name [ , ... ] )', where num_sync specifies
the number of synchronous standbys that transaction commits need to
wait for replies from and standby_name is the name of a standby
server.
The syntax of 'standby_name [ , ... ]' which was used in 9.5 or before
is also still supported. It's the same as new syntax with num_sync=1.
This commit doesn't include "quorum commit" feature which was discussed
in pgsql-hackers. Synchronous standbys are chosen based on their priorities.
synchronous_standby_names determines the priority of each standby for
being chosen as a synchronous standby. The standbys whose names appear
earlier in the list are given higher priority and will be considered as
synchronous. Other standby servers appearing later in this list
represent potential synchronous standbys.
The regression test for multiple synchronous standbys is not included
in this commit. It should come later.
Authors: Sawada Masahiko, Beena Emerson, Michael Paquier, Fujii Masao
Reviewed-By: Kyotaro Horiguchi, Amit Kapila, Robert Haas, Simon Riggs,
Amit Langote, Thomas Munro, Sameer Thakur, Suraj Kharage, Abhijit Menon-Sen,
Rajeev Rastogi
Many thanks to the various individuals who were involved in
discussing and developing this feature.
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
Commit 4de82f7d7 increased the WAL flush rate, mainly to increase the
likelihood that hint bits can be set quickly. More quickly set hint bits
can reduce contention around the clog et al. But unfortunately the
increased flush rate can have a significant negative performance impact,
I have measured up to a factor of ~4. The reason for this slowdown is
that if there are independent writes to the underlying devices, for
example because shared buffers is a lot smaller than the hot data set,
or because a checkpoint is ongoing, the fdatasync() calls force cache
flushes to be emitted to the storage.
This is achieved by flushing WAL only if the last flush was longer than
wal_writer_delay ago, or if more than wal_writer_flush_after (new GUC)
unflushed blocks are pending. Based on some tests the default for
wal_writer_delay is 1MB, which seems to work well both on SSD and
rotational media.
To avoid negative performance impact due to 4de82f7d7 an earlier
commit (db76b1e) made SetHintBits() more likely to succeed; preventing
performance regressions in the pgbench tests I performed.
Discussion: 20160118163908.GW10941@awork2.anarazel.de
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
This was forgotten in 8a3631f (commit that originally added the parameter)
and 0ca9907 (commit that added the documentation later that year).
Back-patch to all supported versions.
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master.
Author: Andres Freund
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.5 and master, 9.0-9.4 get a different patch
The introduction of min_wal_size & max_wal_size in 88e9823026 makes it
feasible to increase the default upper bound in checkpoint
size. Previously raising the default would lead to a increased disk
footprint, even if more segments weren't beneficial. The low default of
checkpoint size is one of common performance problem users have thus
increasing the default makes sense. Setups where the increase in
maximum disk usage is a problem will very likely have to run with a
modified configuration anyway.
Discussion: 54F4EFB8.40202@agliodbs.com,
CA+TgmoZEAgX5oMGJOHVj8L7XOkAe05Gnf45rP40m-K3FhZRVKg@mail.gmail.com
Author: Josh Berkus, after a discussion involving lots of people.
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
Instead of having a single knob (checkpoint_segments) that both triggers
checkpoints, and determines how many checkpoints to recycle, they are now
separate concerns. There is still an internal variable called
CheckpointSegments, which triggers checkpoints. But it no longer determines
how many segments to recycle at a checkpoint. That is now auto-tuned by
keeping a moving average of the distance between checkpoints (in bytes),
and trying to keep that many segments in reserve. The advantage of this is
that you can set max_wal_size very high, but the system won't actually
consume that much space if there isn't any need for it. The min_wal_size
sets a floor for that; you can effectively disable the auto-tuning behavior
by setting min_wal_size equal to max_wal_size.
The max_wal_size setting is now the actual target size of WAL at which a
new checkpoint is triggered, instead of the distance between checkpoints.
Previously, you could calculate the actual WAL usage with the formula
"(2 + checkpoint_completion_target) * checkpoint_segments + 1". With this
patch, you set the desired WAL usage with max_wal_size, and the system
calculates the appropriate CheckpointSegments with the reverse of that
formula. That's a lot more intuitive for administrators to set.
Reviewed by Amit Kapila and Venkata Balaji N.
Previously when the standby server failed to retrieve WAL files from any sources
(i.e., streaming replication, local pg_xlog directory or WAL archive), it always
waited for five seconds (hard-coded) before the next attempt. For example,
this is problematic in warm-standby because restore_command can fail
every five seconds even while new WAL file is expected to be unavailable for
a long time and flood the log files with its error messages.
This commit adds new parameter, wal_retrieve_retry_interval, to control that
wait time.
Alexey Vasiliev and Michael Paquier, reviewed by Andres Freund and me.
It was an oversight in the original commit.
Also note in the sample config file that changing wal_log_hints requires a
restart.
Michael Paquier. Backpatch to 9.4, where wal_log_hints was added.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
Most zones in the Russian Federation are subtracting one or two hours
as of 2014-10-26. Update the meanings of the abbreviations IRKT, KRAT,
MAGT, MSK, NOVT, OMST, SAKT, VLAT, YAKT, YEKT to match.
The IANA timezone database has adopted abbreviations of the form AxST/AxDT
for all Australian time zones, reflecting what they believe to be current
majority practice Down Under. These names do not conflict with usage
elsewhere (other than ACST for Acre Summer Time, which has been in disuse
since 1994). Accordingly, adopt these names into our "Default" timezone
abbreviation set. The "Australia" abbreviation set now contains only
CST,EAST,EST,SAST,SAT,WST, all of which are thought to be mostly historical
usage. Note that SAST has also been changed to be South Africa Standard
Time in the "Default" abbreviation set.
Add zone abbreviations SRET (Asia/Srednekolymsk) and XJT (Asia/Urumqi),
and use WSST/WSDT for western Samoa.
Also a DST law change in the Turks & Caicos Islands (America/Grand_Turk),
and numerous corrections for historical time zone data.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
Previously replication commands like IDENTIFY_COMMAND were not logged
even when log_statements is set to all. Some users who want to audit
all types of statements were not satisfied with this situation. To
address the problem, this commit adds new GUC log_replication_commands.
If it's enabled, all replication commands are logged in the server log.
There are many ways to allow us to enable that logging. For example,
we can extend log_statement so that replication commands are logged
when it's set to all. But per discussion in the community, we reached
the consensus to add separate GUC for that.
Reviewed by Ian Barwick, Robert Haas and Heikki Linnakangas.
While the space is optional, it seems nicer to be consistent with what
you get if you do "SET search_path=...". SET always normalizes the
separator to be comma+space.
Christoph Martin
When running several postgres clusters on one OS instance it's often
inconveniently hard to identify which "postgres" process belongs to
which postgres instance.
Add the cluster_name GUC, whose value will be included as part of the
process titles if set. With that processes can more easily identified
using tools like 'ps'.
To avoid problems with encoding mismatches between postgresql.conf,
consoles, and individual databases replace non-ASCII chars in the name
with question marks. The length is limited to NAMEDATALEN to make it
less likely to truncate important information at the end of the
status.
Thomas Munro, with some adjustments by me and review by a host of people.
Per discussion, the old value of 128MB is ridiculously small on modern
machines; in fact, it's not even any larger than the default value of
shared_buffers, which it certainly should be. Increase to 4GB, which
is unlikely to be any worse than the old default for anyone, and should
be noticeably better for most. Eventually we might have an autotuning
scheme for this setting, but the recent attempt crashed and burned,
so for now just do this.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
krb_srvname is actually not available anymore as a parameter server-side, since
with gssapi we accept all principals in our keytab. It's still used in libpq for
client side specification.
In passing remove declaration of krb_server_hostname, where all the functionality
was already removed.
Noted by Stephen Frost, though a different solution than his suggestion
- Write HIGH:MEDIUM instead of DEFAULT:!LOW:!EXP for clarity.
- Order 3DES last to work around inappropriate OpenSSL default.
- Remove !MD5 and @STRENGTH, because they are irrelevant.
- Add clarifying documentation.
Effectively, the new default is almost the same as the old one, but it
is arguably easier to understand and modify.
Author: Marko Kreen <markokr@gmail.com>
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
This patch adds an option, huge_tlb_pages, which allows requesting the
shared memory segment to be allocated using huge pages, by using the
MAP_HUGETLB flag in mmap(). This can improve performance.
The default is 'try', which means that we will attempt using huge pages,
and fall back to non-huge pages if it doesn't work. Currently, only Linux
has MAP_HUGETLB. On other platforms, the default 'try' behaves the same as
'off'.
In the passing, don't try to round the mmap() size to a multiple of
pagesize. mmap() doesn't require that, and there's no particular reason for
PostgreSQL to do that either. When using MAP_HUGETLB, however, round the
request size up to nearest 2MB boundary. This is to work around a bug in
some Linux kernel versions, but also to avoid wasting memory, because the
kernel will round the size up anyway.
Many people were involved in writing this patch, including Christian Kruse,
Richard Poole, Abhijit Menon-Sen, reviewed by Peter Geoghegan, Andres Freund
and me.
Fix integer overflow issue noted by Magnus Hagander, as well as a bunch
of other infelicities in commit ee1e5662d8
and its unreasonably large number of followups.
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
This sets up ECDH key exchange, when compiling against OpenSSL that
supports EC. Then the ECDHE-RSA and ECDHE-ECDSA cipher suites can be
used for SSL connections. The latter one means that EC keys are now
usable.
The reason for EC key exchange is that it's faster than DHE and it
allows to go to higher security levels where RSA will be horribly slow.
There is also new GUC option ssl_ecdh_curve that specifies the curve
name used for ECDH. It defaults to "prime256v1", which is the most
common curve in use in HTTPS.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
By default, OpenSSL (and SSL/TLS in general) lets the client cipher
order take priority. This is OK for browsers where the ciphers were
tuned, but few PostgreSQL client libraries make the cipher order
configurable. So it makes sense to have the cipher order in
postgresql.conf take priority over client defaults.
This patch adds the setting "ssl_prefer_server_ciphers" that can be
turned on so that server cipher order is preferred. Per discussion,
this now defaults to on.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
In 9.3, there's no particular limit on the number of bgworkers;
instead, we just count up the number that are actually registered,
and use that to set MaxBackends. However, that approach causes
problems for Hot Standby, which needs both MaxBackends and the
size of the lock table to be the same on the standby as on the
master, yet it may not be desirable to run the same bgworkers in
both places. 9.3 handles that by failing to notice the problem,
which will probably work fine in nearly all cases anyway, but is
not theoretically sound.
A further problem with simply counting the number of registered
workers is that new workers can't be registered without a
postmaster restart. This is inconvenient for administrators,
since bouncing the postmaster causes an interruption of service.
Moreover, there are a number of applications for background
processes where, by necessity, the background process must be
started on the fly (e.g. parallel query). While this patch
doesn't actually make it possible to register new background
workers after startup time, it's a necessary prerequisite.
Patch by me. Review by Michael Paquier.
This GUC allows limiting the time spent waiting to acquire any one
heavyweight lock.
In support of this, improve the recently-added timeout infrastructure
to permit efficiently enabling or disabling multiple timeouts at once.
That reduces the performance hit from turning on lock_timeout, though
it's still not zero.
Zoltán Böszörményi, reviewed by Tom Lane,
Stephen Frost, and Hari Babu
It's better to start from what the OpenSSL people consider a good
default and then remove insecure things (low encryption, exportable
encryption and md5 at this point) from that, instead of starting
from everything that exists and remove from that. We trust the
OpenSSL people to make good choices about what the default is.
Rename replication_timeout to wal_sender_timeout, and add a new setting
called wal_receiver_timeout that does the same at the walreceiver side.
There was previously no timeout in walreceiver, so if the network went down,
for example, the walreceiver could take a long time to notice that the
connection was lost. Now with the two settings, both sides of a replication
connection will detect a broken connection similarly.
It is no longer necessary to manually set wal_receiver_status_interval to
a value smaller than the timeout. Both wal sender and receiver now
automatically send a "ping" message if more than 1/2 of the configured
timeout has elapsed, and it hasn't received any messages from the other end.
Amit Kapila, heavily edited by me.
This allows easily splitting configuration into many files, deployed in a
directory.
Magnus Hagander, Greg Smith, Selena Deckelmann, reviewed by Noah Misch.
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
Currently, the only way to see the numbers this gathers is via
EXPLAIN (ANALYZE, BUFFERS), but the plan is to add visibility through
the stats collector and pg_stat_statements in subsequent patches.
Ants Aasma, reviewed by Greg Smith, with some further changes by me.
This allows changing the location of the files that were previously
hard-coded to server.crt, server.key, root.crt, root.crl.
server.crt and server.key continue to be the default settings and are
thus required to be present by default if SSL is enabled. But the
settings for the server-side CA and CRL are now empty by default, and
if they are set, the files are required to be present. This replaces
the previous behavior of ignoring the functionality if the files were
not found.
This allows different instances to use the eventlog with different
identifiers, by setting the event_source GUC, similar to how
syslog_ident works.
Original patch by MauMau, heavily modified by Magnus Hagander
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs. So, let's just remove it.
With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not. (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)
There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
Michael Paquier
Andrew Gierth
Peter Eisentraut
Thomas Munro
Alvaro Herrera
Peter Eisentraut
Andres Freund
Tom Lane
Alexander Korotkov
Robert Haas
Heikki Linnakangas
Tatsuo Ishii
Magnus Hagander
Fujii Masao
Kevin Grittner
Bruce Momjian
Simon Riggs
Jeff Davis
Stephen Frost