Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Previously when pg_log_backend_memory_contexts() sent the request to
the autovacuum launcher, it could take more than several seconds to
log its memory contexts. Because the function (HandleAutoVacLauncherInterrupts)
to process any new interrupts that autovacuum launcher received
didn't handle the request for logging of memory contexts. This commit changes
the function so that it handles the request, to make autovacuum launcher
more responsitve to pg_log_backend_memory_contexts().
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Koyu Tanigawa
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/0aae3e074face409b35153451be5cc11@oss.nttdata.com
Have verify_heapam.c treat unlogged relations as if they were simply
empty when in Hot Standby mode. This brings it in line with
verify_nbtree.c, which has handled unlogged relations in the same way
since bugfix commit 6754fe65a4. This was an oversight in commit
866e24d47d, which extended contrib/amcheck to check heap relations.
In passing, lower the verbosity used when reporting that a relation has
been skipped like this, from NOTICE to DEBUG1. This is appropriate
because the skipping behavior is only an implementation detail, needed
to work around the fact that unlogged tables don't have smgr-level
storage for their main fork when in Hot Standby mode.
Affected unlogged relations should be considered "trivially verified",
not skipped over. They are verified in the same sense that a totally
empty relation can be verified. This behavior seems least surprising
overall, since unlogged relations on a replica will initially be empty
if and when the replica is promoted and Hot Standby ends.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzk_pukOFY7JmdiFLsrz+Pd3V8OwgC1TH2Vd5BH5ZgK4bA@mail.gmail.com
Backpatch: 14-, where heapam verification was introduced.
Per the discussion around 3eb1f4d09, let's have configure verify that
the available IPC::Run version is at least 0.79, the agreed-on minimum.
It seems unlikely that this could bite anybody anymore, but it's useful
as documentation. (Based on that, there's little need to back-patch.)
For consistency, also supply a minimum version for the other Perl
module we have an explicit check for, Time::HiRes. I used the
version that ships with Perl 5.8.3.
Discussion: https://postgr.es/m/E1mYY6Z-0006OL-QN@gemulon.postgresql.org
Commit 3f50b8263 had an oversight: formerly, to deparse expressions
attached to a plan node, it was only necessary to update the
deparse_namespace ancestors list alongside calling set_deparse_plan.
Now it's necessary to update the ancestors list *first*, because
set_deparse_plan consults it, and one call site got that wrong.
This error was masked in most cases because explain.c uses just one
List object for the ancestors list, updating it in-place as the plan
is scanned, so that we accidentally had the right List assigned to
dpns->ancestors before it was needed. It would fail only if a
WorkTableScan node were the first one that we tried to deparse a
subexpression of.
Per report from Markus Winand. Like the previous patch,
back-patch to v14.
Discussion: https://postgr.es/m/648B0505-AA57-42C2-A2DA-E551DE46FA15@winand.at
The previous text didn't provide any clear explanation of our policy
around TAP test portability. The recipe for using perlbrew had some
problems, too: it resulted in a non-shared libperl (preventing
testing of plperl) and it caused some modules to be updated to
current when the point of the recipe is to build an old environment.
Discussion: https://postgr.es/m/E1mYY6Z-0006OL-QN@gemulon.postgresql.org
This operator wasn't formally documented anywhere. To give it
a natural home, relabel the functions-string-other table as
"Other String Functions and Operators", which is more parallel
to the functions-string-sql table anyway.
While here, add cross-references to the pattern match and text
search sections. It seems moderately likely that people would
come to this section looking for those (but I don't want to
actually list them in these tables).
Discussion: https://postgr.es/m/CADT4RqB13KQHOJqqQ+WXmYtJrukS2UiFdtfTvT-XA3qYLyB6Cw@mail.gmail.com
send_message_to_server_log() would force a redirection of a log entry to
stderr in some cases for csvlog, like the syslogger not being available
yet. If this happens, csvlog would fall back to stderr to log
some information rather than nothing. The code was organized so as
stderr is done before csvlog, with csvlog checking that stderr did not
happen yet with a reversed condition. With this code organization, it
could be possible to lose some messages if running Postgres as a service
on WIN32, as there is no usable stderr, and the handling of the
StringInfoData holding the message for stderr was rather confusing
because of that.
This commit moves the csvlog handling to be before stderr, as as we are
able to track down if it is necessary to log something to stderr. The
reduces the handling of stderr to be in a single code path, adding a
fallback to event logs for a WIN32 service. This also simplifies the
way we handle the StringInfoData for stderr, making easier the
integration of new file-based log destinations. I got to play with
services and event logs on Windows while checking this change.
Reviewed-by: Chris Bandy
Discussion: https://postgr.es/m/YV0vwBovEKf1WXkl@paquier.xyz
We currently have buildfarm members testing back to AIX 7.1,
but not before, and older AIX versions are long out of support
from IBM. So say that 7.1 is the oldest supported version.
Discussion: https://postgr.es/m/87y278s6iq.fsf@wibble.ilmari.org
Previously it only checked for version >= 5.8.0, although the
documentation has said that the minimum version is 5.8.3 since
commit dea6ba939. Per the discussion leading up to that commit,
I (tgl) left it that way intentionally because you could, at the
time, do some bare-bones stuff with 5.8.0. But we aren't actually
testing against anything older than 5.8.3, so who knows if that's
still true. It's pretty unlikely that anyone would care anyway,
so let's just make configure's version check match the docs.
Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87y278s6iq.fsf@wibble.ilmari.org
Discussion: https://postgr.es/m/16894.1501392088@sss.pgh.pa.us
Also apply the changes suggested by running
perl ppport.h --compat-version=5.8.0
And remove some no-longer-required NEED_foo declarations.
Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87y278s6iq.fsf@wibble.ilmari.org
stderr and csvlog have been using duplicated code when it came to the
rotation of their file by size, age or if forced by a user request
(pg_ctl logrotate or the SQL function pg_rotate_logfile). The main
difference between both is that stderr requires its file to always be
opened, so as it is possible to have a redirection route if the logging
collector is not ready yet to do its work if alternate destinations are
enabled.
Also, if csvlog gets disabled, we need to close properly its meta-data
stored in the logging collector (last file name for current_logfiles and
fd currently open for business). Except for those points, the code is
the same in terms of error handling and if a file should be created or
just continued.
This change makes the code simpler overall, and it will help in the
introduction of more file-based log destinations. This refactoring is
similar to the work done in 5b0b699. Most of the duplication originates
from fd801f4.
Some of the TAP tests of pg_ctl check the case of a forced log rotation,
but this is somewhat limited as there is no coverage for
log_rotation_age or log_rotation_size (these may not be worth the extra
resources to run either), and no coverage for reload of log_destination
with different combinations of stderr and csvlog. I have tested all
those cases separately for this refactoring.
Author: Michael Paquier
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
Commit c7b7311f6 adjusted conversion_error_callback to always use
information from the query's rangetable, to avoid doing catalog lookups
in an already-failed transaction. However, as a result of the utterly
inadequate documentation for make_tuple_from_result_row, I failed to
realize that fsstate could be NULL in some contexts. That led to a
crash if we got a conversion error in such a context. Fix by falling
back to the previous coding when fsstate is NULL. Improve the
commentary, too.
Per report from Andrey Borodin. Back-patch to 9.6, like the previous
patch.
Discussion: https://postgr.es/m/08916396-55E4-4D68-AB3A-BD6066F9E5C0@yandex-team.ru
This fixes a loss of precision that occurs when the first input is
very close to 1, so that its logarithm is very small.
Formerly, during the initial low-precision calculation to estimate the
result weight, the logarithm was computed to a local rscale that was
capped to NUMERIC_MAX_DISPLAY_SCALE (1000). However, the base may be
as close as 1e-16383 to 1, hence its logarithm may be as small as
1e-16383, and so the local rscale needs to be allowed to exceed 16383,
otherwise all precision is lost, leading to a poor choice of rscale
for the full-precision calculation.
Fix this by removing the cap on the local rscale during the initial
low-precision calculation, as we already do in the full-precision
calculation. This doesn't change the fact that the initial calculation
is a low-precision approximation, computing the logarithm to around 8
significant digits, which is very fast, especially when the base is
very close to 1.
Patch by me, reviewed by Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCV-Ceu%2BHpRMf416yUe4KKFv%3DtdgXQAe5-7S9tD%3D5E-T1g%40mail.gmail.com
Like BASE_BACKUP, CREATE_REPLICATION_SLOT has historically used a
hard-coded syntax. To improve future extensibility, adopt a flexible
options syntax here, too.
In the new syntax, instead of three mutually exclusive options
EXPORT_SNAPSHOT, USE_SNAPSHOT, and NOEXPORT_SNAPSHOT, there is now a single
SNAPSHOT option with three possible values: 'export', 'use', and 'nothing'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, makes pg_receivewal,
pg_recvlogical, and walreceiver processes use it.
Patch by me, reviewed by Fabien Coelho, Sergei Kornilov, and
Fujii Masao.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Previously, BASE_BACKUP used an entirely hard-coded syntax, but that's
hard to extend. Instead, adopt the same kind of syntax we've used for
SQL commands such as VACUUM, ANALYZE, COPY, and EXPLAIN, where it's
not necessary for all of the option names to be parser keywords.
In the new syntax, most of the options now take an optional Boolean
argument. To match our practice in other in places, the options which
the old syntax called NOWAIT and NOVERIFY_CHECKSUMS options are in the
new syntax called WAIT and VERIFY_CHECKUMS, and the default value is
false. In the new syntax, the FAST option has been replaced by a
CHECKSUM option whose value may be 'fast' or 'spread'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, and makes pg_basebackup prefer
the new syntax when the server is new enough to support it.
Patch by me, reviewed and tested by Fabien Coelho, Sergei Kornilov,
Fujii Masao, and Tushar Ahuja.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Commit 0668719801 changed XLogPageRead() so that it validated the page
header, if invalid page header was found reset the error message and
retried reading the page, to fix the scenario where streaming standby
got stuck at a continuation record. This change hid the error message
about invalid page header, which would make it harder for users to
investigate what the actual issue was found in WAL.
To fix the issue, this commit makes XLogPageRead() report the error
message when invalid page header is found.
When not in standby mode, an invalid page header should cause recovery
to end, not retry reading the page, so XLogPageRead() doesn't need to
validate the page header for the retry. Instead, ReadPageInternal() should
be responsible for the validation in that case. Therefore this commit
changes XLogPageRead() so that if not in standby mode it doesn't validate
the page header for the retry.
Reported-by: Yugo Nagata
Author: Yugo Nagata, Kyotaro Horiguchi
Reviewed-by: Ranier Vilela, Fujii Masao
Discussion: https://postgr.es/m/20210718045505.32f463ed6c227111038d8ae4@sraoss.co.jp
queries.sgml failed to mention the rather important point that
INTERSECT binds more tightly than UNION or EXCEPT. I thought
it could also use more discussion of the role of parentheses
in these constructs.
Per gripe from Christopher Painter-Wakefield.
Discussion: https://postgr.es/m/163338891727.12510.3939775743980651160@wrigleys.postgresql.org
Previously both functions were not described anywhere in the docs.
But since they have been around since 7.0 and mentioned in the description
for system catalog like pg_database, it's reasonable to add short
descriptions for them.
Author: Ian Lawrence Barwick
Reviewed-by: Laurenz Albe, Fujii Masao
Discussion: https://postgr.es/m/CAB8KJ=infievn4q1N4X7Vx8w4_RMPPG0pLvxhSDjy5WQOSHW9g@mail.gmail.com
The old URL was HTTP 404 and the git link didn't build. Also update two
other ICU links. If we ever get a good link we will add it back.
Reported-by: Anton Voloshin
Author: Laurenz Albe
Backpatch-through: 10
3c5b0685b9 used setFilePointer() to set the position of the filehandle, but
passed the wrong filehandle, always leaving the position at 0. Instead of just
fixing that, remove use of setFilePointer(), we have a perl fd at this point,
so we can just use perl's seek().
Additionally, the perl filehandle wasn't closed, just the windows filehandle.
Reviewed-By: Andrew Dunstan <andrew@dunslane.net>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211003173038.64mmhgxctfqn7wl6@alap3.anarazel.de
Backpatch: 9.6-, like 3c5b0685b9
windows.h includes a lot of other headers, slowing down compilation
significantly. WIN32_LEAN_AND_MEAN reduces that a bit. It'd be better to
remove the include of windows.h (as well as indirect inclusions of it) from such
a central place, but until then...
Discussion: https://postgr.es/m/20210921193035.pqzay43vpyv7in43@alap3.anarazel.de
Commit e9bc0441f added an errorhint on the exit() check for libpq, but
accidentally changed the nm commandline to use -a instead of -A. These
options are similar enough to hide it in testing, but -a can also show
debugger symbols which isn't what we want. Fix by reverting the check
back to using -A again.
Reported-by: Anton Voloshin <a.voloshin@postgrespro.ru>
Discussion: https://postgr.es/m/bd2c8409-d6b3-5de9-ba0f-40c1381f630f@postgrespro.ru
Per discussion, let's just follow CLDR's default zone mappings
faithfully. There are two changes here that are clear improvements:
* Mapping "Greenwich Standard Time" to Atlantic/Reykjavik is actually
a better fit than using London, because Iceland hasn't observed DST
since 1968, so this is more nearly what people might expect.
* Since the "Samoa" zone is specified to be UTC+13:00, we must map
it to Pacific/Apia not Pacific/Samoa; the latter refers to American
Samoa which is now on the other side of the date line.
The rest of these changes look like they're choosing the most populous
IANA zone as representative. Whatever the details, we're just going
to say "if you don't like this mapping, complain to CLDR".
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
gist.sgml and xindex.sgml hadn't been fully updated for the
addition of a sortsupport support function (commit 16fa9b2b3).
xindex.sgml also missed that the compress and decompress support
functions are optional, an apparently far older oversight.
In passing, fix gratuitous inconsistencies in wording and
capitalization.
Noted by E. Rogov. Back-patch to v14; the residual issues
before that aren't significant enough to bother with.
Discussion: https://postgr.es/m/163335322905.12519.5711557029494638051@wrigleys.postgresql.org
Commit dc227eb82 introduced a restriction on libpq that no functions which
invoke exit() are allowed to be called. This was further refined and fixed
in e45b0dfa1f and 2f7bae2f92 and 792259591. While this is well documented
in the Makefile, the error message emitted when the check failed was terse,
without hints for new developers without prior context. This adds an error
hint to assist new developers onboarding to postgres.
Author: Rachel Heaton <rheaton@vmware.com>
Co-authored-by: Jacob Champion <pchampion@vmware.com>
Discussion: https://postgr.es/m/CADJcwiVL20955HCNzDqz9BEDr6A77pz6-nac5sbZVvhAEMijLg@mail.gmail.com
A couple of newer ones are available. There are no functional
differences, but let's get them in anyway, so that there is no
surprise diff next time someone wants to do some actual work in this
area.
The error message for trying to run the TAP tests in a tree not
configured with --enable-tap-tests is quite terse, and could be
made more helpful to new developers onboarding to postgres. This
adds a small hint on how to get the tests running in such cases.
Author: Kevin Burke <kevin@burke.dev>
Discussion: https://postgr.es/m/CAKcy5ejKVYwUXguQcd6i9KHDm7cM7FzjQ+aayaPveoa_woyQpQ@mail.gmail.com
Some specific logic is done at the end of recovery when involving 2PC
transactions:
1) Call RecoverPreparedTransactions(), to recover the state of 2PC
transactions into memory (re-acquire locks, etc.).
2) ShutdownRecoveryTransactionEnvironment(), to move back to normal
operations, mainly cleaning up recovery locks and KnownAssignedXids
(including any 2PC transaction tracked previously).
3) Switch XLogCtl->SharedRecoveryState to RECOVERY_STATE_DONE, which is
the tipping point for any process calling RecoveryInProgress() to check
if the cluster is still in recovery or not.
Any snapshot taken between steps 2) and 3) would be empty, causing any
transaction relying on a snapshot at this point to potentially corrupt
data as there could still be some 2PC transactions to track, with
RecentXmin moving backwards on successive calls to GetSnapshotData() in
the same transaction.
As SharedRecoveryState is the point to take into account to know if it
is safe to discard KnownAssignedXids, this commit moves step 2) after
step 3), so as we can never finish with empty snapshots.
This exists since the introduction of hot standby, so backpatch all the
way down. The window with incorrect snapshots is extremely small, but I
have seen it when running 023_pitr_prepared_xact.pl, as did buildfarm
member fairywren. Thomas Munro also found it independently. Special
thanks to Andres Freund for taking the time to analyze this issue.
Reported-by: Thomas Munro, Michael Paquier
Analyzed-by: Andres Freund
Discussion: https://postgr.es/m/20210422203603.fdnh3fu2mmfp2iov@alap3.anarazel.de
Backpatch-through: 9.6
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
The "equality implies image equality" opclass infrastructure disallowed
deduplication in system catalog indexes and TOAST indexes before now.
That seemed like the right approach back when the infrastructure was
added by commit 612a1ab7, since ALTER INDEX cannot set deduplicate_items
to 'off' (due to an old implementation restriction). But that decision
now seems arbitrary at best. Remove special case handling implementing
this policy.
No catversion bump, since existing catalog indexes will still work.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=rYQHFaJ3WYBdK=xgwxKzaiGMSSrh-ZCREa-pS-7Zjew@mail.gmail.com
This corrects a bunch of entries in win32_tzmap[], and adds a few
new ones, based on the CLDR project's windowsZones.xml file.
Non-cosmetic changes fall into four main categories:
* Flat-out errors:
US/Aleutan doesn't exist
America/Salvador doesn't exist
Asia/Baku is wrong for Yerevan
Asia/Dhaka (Bangladesh) is wrong for Astana (Kazakhstan)
Europe/Bucharest is wrong for Chisinau
America/Mexico_City is wrong for Chetumal
America/Buenos_Aires is wrong for Cayenne
America/Caracas has its own zone, so poor fit for La Paz
US/Eastern is wrong for Haiti
US/Eastern is wrong for Indiana (East)
Asia/Karachi is wrong for Tashkent
Etc/UTC+12 doesn't exist
Signs of Etc/GMT zones were backwards
* Judgment calls:
(These changes follow CLDR's choices, except for the first one)
Use Europe/London for "Greenwich Standard Time", since that seems much
more likely than Africa/Casablanca to be what people will think that
zone name means. CLDR has Atlantic/Reykjavik here, but that's no better.
Asia/Shanghai seems a better fit than Hong Kong for "China Standard
Time".
Europe/Sarajevo is now a link to Belgrade, ie "Central Europe Standard
Time"; so use Warsaw for "Central European Standard Time".
America/Sao_Paulo seems more representative than Araguaina for
"E. South America Standard Time".
Africa/Johannesburg seems more representative than Harare for
"South Africa Standard Time".
* New Windows zone names:
"Israel Standard Time"
"Kaliningrad Standard Time"
"Russia Time Zone N" for various N
"Singapore Standard Time"
"South Sudan Standard Time"
"W. Central Africa Standard Time"
"West Bank Standard Time"
"Yukon Standard Time"
Some of these replace older spellings, but I kept the older spellings
too in case our code runs on a machine with the older data.
* Replace aliases (tzdb Links) with underlying city-named zones:
(This tracks tzdb's longstanding practice, and reduces inconsistency
with the rest of the entries, as well as with CLDR.)
US/Alaska
Asia/Kuwait
Asia/Muscat
Canada/Atlantic
Australia/Canberra
Canada/Saskatchewan
US/Central
US/Eastern
US/Hawaii
US/Mountain
Canada/Newfoundland
US/Pacific
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
The original intent seems to have been to sort case-insensitively
by the Windows zone name, but various changes over the years did
not get that memo. This commit just moves a few entries to
restore exact alphabetic order, to ease comparison to the outputs
of processing scripts.
Back-patch to all supported branches, as is our usual practice for
time zone data updates.
Discussion: https://postgr.es/m/3266414.1633045628@sss.pgh.pa.us
Peter Eisentraut
Michael Paquier
Fujii Masao
Peter Geoghegan
Tom Lane
Etsuro Fujita
Dean Rasheed
Robert Haas
Amit Kapila
Bruce Momjian
Andres Freund
Daniel Gustafsson