for it. Hopefully will fix core dump evidenced by some buildfarm members
since fadvise patch went in. The actual definition of the function is not
ABI-compatible with compiler's default assumption in the absence of any
declaration, so it's clearly unsafe to try to call it without seeing a
declaration.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
whenever we start to read within that file. The first page carries
extra identification information that really ought to be checked, but
as the code stood, this was only checked when we switched sequentially
into a new WAL file, or if by chance the starting checkpoint record was
within the first page. This patch ensures that we will detect bogus
'long header' information before we start replaying the WAL sequence.
to occur between pg_start_backup() and pg_stop_backup(), even if the GUC
setting full_page_writes is OFF. Per discussion, doing this in combination
with the already-existing checkpoint during pg_start_backup() should ensure
safety against partial page updates being included in the backup. We do
not have to force full page writes to occur during normal PITR operation,
as I had first feared.
update no-longer-existing pages to fall through as no-ops, but make a note
of each page number referenced by such records. If we don't see a later
XLOG entry dropping the table or truncating away the page, complain at
the end of XLOG replay. Since this fixes the known failure mode for
full_page_writes = off, revert my previous band-aid patch that disabled
that GUC variable.
XLOG_BLCKSZ. This ought to help in preventing configuration mismatch
problems if anyone tries to ship PITR files between servers compiled
with different XLOG_BLCKSZ settings. Simon Riggs
instead a dedicated symbol. This probably makes no functional difference
for likely values of BLCKSZ, but it makes the intent clearer.
Simon Riggs, minor editorialization by Tom Lane.
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
failures even when the hardware and OS did nothing wrong. Per recent analysis
of a problem report from Alex Bahdushka.
For the moment I've just diked out the test of the parameter, rather than
removing the GUC infrastructure and documentation, in case we conclude that
there's something salvageable there. There seems no chance of it being
resurrected in the 8.1 branch though.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
more compliant with the error message style guide. In particular,
errdetail should begin with a capital letter and end with a period,
whereas errmsg should not. I also fixed a few related issues in
passing, such as fixing the repeated misspelling of "lexeme" in
contrib/tsearch2 (per Tom's suggestion).
to try to create a log segment file concurrently, but the code erroneously
specified O_EXCL to open(), resulting in a needless failure. Before 7.4,
it was even a PANIC condition :-(. Correct code is actually simpler than
what we had, because we can just say O_CREAT to start with and not need a
second open() call. I believe this accounts for several recent reports of
hard-to-reproduce "could not create file ...: File exists" errors in both
pg_clog and pg_subtrans.
rather than "return expr;" -- the latter style is used in most of the
tree. I kept the parentheses when they were necessary or useful because
the return expression was complex.
in favor of having just one set of macros that don't do HOLD/RESUME_INTERRUPTS
(hence, these correspond to the old SpinLockAcquire_NoHoldoff case).
Given our coding rules for spinlock use, there is no reason to allow
CHECK_FOR_INTERRUPTS to be done while holding a spinlock, and also there
is no situation where ImmediateInterruptOK will be true while holding a
spinlock. Therefore doing HOLD/RESUME_INTERRUPTS while taking/releasing a
spinlock is just a waste of cycles. Qingqing Zhou and Tom Lane.
setup. This protects against undesired changes in locale behavior
if someone carelessly does setlocale(LC_ALL, "") (and we know who
you are, perl guys).
reduce contention for the former single LockMgrLock. Per my recent
proposal. I set it up for 16 partitions, but on a pgbench test this
gives only a marginal further improvement over 4 partitions --- we need
to test more scenarios to choose the number of partitions.
SLRU area. The number of slots is still a compile-time constant (someday
we might want to change that), but at least it's a different constant for
each SLRU area. Increase number of subtrans buffers to 32 based on
experimentation with a heavily subtrans-bashing test case, and increase
number of multixact member buffers to 16, since it's obviously silly for
it not to be at least twice the number of multixact offset buffers.
lock, not exclusive, if the desired page is already in memory. This can
be demonstrated to be a significant win on the pg_subtrans cache when there
is a large window of open transactions. It should be useful for pg_clog
as well. I didn't try to make GetMultiXactIdMembers() use the code, as
that would have taken some restructuring, and what with the local cache
for multixact contents it probably wouldn't really make a difference.
Per my recent proposal.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
very narrow window in which SimpleLruReadPage or SimpleLruWritePage could
think that I/O was needed when it wasn't (and indeed the buffer had already
been assigned to another page). This would result in an Assert failure if
Asserts were enabled, and probably in silent data corruption if not.
Reported independently by Jim Nasby and Robert Creager.
I intend a more extensive fix when 8.2 development starts, but this is a
reasonably low-impact patch for the existing branches.
multixact's starting offset before the offset has been stored into the
SLRU file. A simple fix would be to hold the MultiXactGenLock until the
offset has been stored, but that looks like a big concurrency hit. Instead
rely on knowledge that unset offsets will be zero, and loop when we see
a zero. This requires a little extra hacking to ensure that zero is never
a valid value for the offset. Problem reported by Matteo Beccati, fix
ideas from Martijn van Oosterhout, Alvaro Herrera, and Tom Lane.
This makes the error messages for PREPARE TRANSACTION, COMMIT PREPARED
etc. match the docs, which talk about "transaction identifier" not
"gid" or "global transaction identifier".
Steve Woodcock
was created on a machine with alignment rules and floating-point format
similar to the current machine. Per recent discussion, this seems like
a good idea with the increasing prevalence of 32/64 bit environments.
saves nearly 700kB in the default shared memory segment size, which seems
worthwhile, and it is a feature that many users won't use anyway. Per
Heikki's argument, there is no point in a compromise value --- those who
are using 2PC at all will probably want it at least equal to max_connections.
But we can't set it to zero by default without breaking the prepared_xacts
regression test.
after the fact. Fix bug with incorrect test for whether we are at end
of logfile segment. Arrange for writes triggered by XLogInsert's
is-cache-more-than-half-full test to synchronize with the cache boundaries,
so that in long transactions we tend to write alternating halves of the
cache rather than randomly chosen portions of it; this saves one more
write syscall per cache load.
not accepting queries).
errmsg("database is not accepting queries to avoid
wraparound data loss in database \"%s\"",
errhint("Stop the postmaster and use a standalone
backend to VACUUM database \"%s\".",
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
delay and limit, both as global GUCs and as table-specific entries in
pg_autovacuum. stats_reset_on_server_start is now OFF by default,
but a reset is forced if we did WAL replay. XID-wrap vacuums do not
ANALYZE, but do FREEZE if it's a template database. Alvaro Herrera
ResourceOwner mechanism already released all reference counts for the
cache entries; therefore, we do not need to scan the catcache or relcache
at transaction end, unless we want to do it as a debugging crosscheck.
Do the crosscheck only in Assert mode. This is the same logic we had
previously installed in AtEOXact_Buffers to avoid overhead with large
numbers of shared buffers. I thought it'd be a good idea to do it here
too, in view of Kari Lavikka's recent report showing a real-world case
where AtEOXact_CatCache is taking a significant fraction of runtime.
track shared relations in a separate hashtable, so that operations done
from different databases are counted correctly. Add proper support for
anti-XID-wraparound vacuuming, even in databases that are never connected
to and so have no stats entries. Miscellaneous other bug fixes.
Alvaro Herrera, some additional fixes by Tom Lane.
Also, write multiple WAL buffers out in one write() operation.
ITAGAKI Takahiro
---------------------------------------------------------------------------
> If we disable writeback-cache and use open_sync, the per-page writing
> behavior in WAL module will show up as bad result. O_DIRECT is similar
> to O_DSYNC (at least on linux), so that the benefit of it will disappear
> behind the slow disk revolution.
>
> In the current source, WAL is written as:
> for (i = 0; i < N; i++) { write(&buffers[i], BLCKSZ); }
> Is this intentional? Can we rewrite it as follows?
> write(&buffers[0], N * BLCKSZ);
>
> In order to achieve it, I wrote a 'gather-write' patch (xlog.gw.diff).
> Aside from this, I'll also send the fixed direct io patch (xlog.dio.diff).
> These two patches are independent, so they can be applied either or both.
>
>
> I tested them on my machine and the results as follows. It shows that
> direct-io and gather-write is the best choice when writeback-cache is off.
> Are these two patches worth trying if they are used together?
>
>
> | writeback | fsync= | fdata | open_ | fsync_ | open_
> patch | cache | false | sync | sync | direct | direct
> ------------+-----------+--------+-------+-------+--------+---------
> direct io | off | 124.2 | 105.7 | 48.3 | 48.3 | 48.2
> direct io | on | 129.1 | 112.3 | 114.1 | 142.9 | 144.5
> gather-write| off | 124.3 | 108.7 | 105.4 | (N/A) | (N/A)
> both | off | 131.5 | 115.5 | 114.4 | 145.4 | 145.2
>
> - 20runs * pgbench -s 100 -c 50 -t 200
> - with tuning (wal_buffers=64, commit_delay=500, checkpoint_segments=8)
> - using 2 ATA disks:
> - hda(reiserfs) includes system and wal.
> - hdc(jfs) includes database files. writeback-cache is always on.
>
> ---
> ITAGAKI Takahiro
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
the difference between checkpoints forced due to WAL segment consumption
and checkpoints forced for other reasons (such as CREATE DATABASE). Avoid
generating 'checkpoints are occurring too frequently' messages when the
checkpoint wasn't caused by WAL segment consumption. Per gripe from
Chris K-L.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
given reasonably short lifespans for prepared transactions, this should
mean that only a small minority of state files ever need to be fsynced
at all. Per discussion with Heikki Linnakangas.
old suggestion by Oliver Jowett. Also, add a transaction column to the
pg_locks view to show the xid of each transaction holding or awaiting
locks; this allows prepared transactions to be properly associated with
the locks they own. There was already a column named 'transaction',
and I chose to rename it to 'transactionid' --- since this column is
new in the current devel cycle there should be no backwards compatibility
issue to worry about.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
external projects, we should be careful about what parts of the GiST
API are considered implementation details, and which are part of the
public API. Therefore, I've moved internal-only declarations into
gist_private.h -- future backward-incompatible changes to gist.h should
be made with care, to avoid needlessly breaking external GiST extensions.
Also did some related header cleanup: remove some unnecessary #includes
from gist.h, and remove some unused definitions: isAttByVal(), _gistdump(),
and GISTNStrategies.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
critical and noncritical contexts (an example of noncritical being
post-checkpoint removal of dead xlog segments). In the critical cases
the CRIT_SECTION mechanism will cause ERROR to be promoted to PANIC
anyway, and in the noncritical cases we shouldn't let an error take
down the entire database. Arguably there should be *no* explicit
PANIC errors in this module, only more START/END_CRIT_SECTION calls,
but I didn't go that far. (Yet.)
when recycling a large number of xlog segments during checkpoint.
The former behavior searched from the same start point each time,
requiring O(checkpoint_segments^2) stat() calls to relocate all the
segments. Instead keep track of where we stopped last time through.
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
deferred triggers: either one can create more work for the other,
so we have to loop till it's all gone. Per example from andrew@supernews.
Add a regression test to help spot trouble in this area in future.
transaction rollback via UNDO but I think that's highly unlikely to
happen, so we may as well remove the stubs. (Someday we ought to
rip out the stub xxx_undo routines, too.) Per Alvaro.
currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
the AMI_OVERRIDE flag. The fact that TransactionLogFetch treats
BootstrapTransactionId as always committed is sufficient to make
bootstrap work, and getting rid of extra tests in heavily used code
paths seems like a win. The files produced by initdb are demonstrably
the same after this change.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
is the minimum required fix. I want to look next at taking advantage of
it by simplifying the message semantics in the shared inval message queue,
but that part can be held over for 8.1 if it turns out too ugly.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
the remainder of the current clog page during system startup. While
this was a good idea, it turns out the code fails if nextXid is
exactly at a page boundary, because we won't have created the "current"
clog page yet in that case. Since the page will be correctly zeroed
when we execute the first transaction on it, the solution is just to
do nothing when exactly at a page boundary. Per trouble report from
Dave Hartwig.
'recycled log files' and 'removed log files' messages from DEBUG1 to
DEBUG2, replacing them with a count of files added/removed/recycled in
the checkpoint end message, as per suggestion from Simon Riggs.
pins at end of transaction, and reduce AtEOXact_Buffers to an Assert
cross-check that this was done correctly. When not USE_ASSERT_CHECKING,
AtEOXact_Buffers is a complete no-op. This gets rid of an O(NBuffers)
bottleneck during transaction commit/abort, which recent testing has shown
becomes significant above a few tens of thousands of shared buffers.
running contains VACUUM or a similar command that will internally start
and commit transactions. In such a case, the original caller values of
CurrentMemoryContext and CurrentResourceOwner will point to objects that
will be destroyed by the internal commit. We must restore these pointers
to point to the newly-manufactured transaction context and resource owner,
rather than possibly pointing to deleted memory.
Also tweak xact.c so that AbortTransaction and AbortSubTransaction
forcibly restore a sane value for CurrentResourceOwner, much as they
have always done for CurrentMemoryContext. I'm not certain this is
necessary but I'm feeling paranoid today.
Responds to Sean Chittenden's bug report of 4-Oct.
pg_subtrans --- what we need is the oldest xmin of any snapshot in use
in the current top transaction. Introduce a new variable TransactionXmin
to play this role. Fixes intermittent regression failure reported by
Neil Conway.
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
rather than when returning to the idle loop. This makes no particular
difference for interactively-issued queries, but it makes a big difference
for queries issued within functions: trigger execution now occurs before
the calling function is allowed to proceed. This responds to numerous
complaints about nonintuitive behavior of foreign key checking, such as
http://archives.postgresql.org/pgsql-bugs/2004-09/msg00020.php, and
appears to be required by the SQL99 spec.
Also take the opportunity to simplify the data structures used for the
pending-trigger list, rename them for more clarity, and squeeze out a
bit of space.
Fix TablespaceCreateDbspace() to be able to create a dummy directory
in place of a dropped tablespace's symlink. This eliminates the open
problem of a PANIC during WAL replay when a replayed action attempts
to touch a file in a since-deleted tablespace. It also makes for a
significant improvement in the usability of PITR replay.
a more tolerable limit on the number of subtransactions or deleted files
in COMMIT and ABORT records. Buy back the extra space by eliminating the
xl_xact_prev field, which isn't being used for anything and is rather
unlikely ever to be used for anything.
This does not force initdb, but you do need to do pg_resetxlog if you
want to upgrade an existing 8.0 installation without initdb.
relcache entries. Also, change TransactionIdIsCurrentTransactionId()
so that if consulted during transaction abort, it will not say that
the aborted xact is still current. (It would be better to ensure that
it's never called at all during abort, but I'm not sure we can easily
guarantee that.) In combination, these fix a crash we have seen
occasionally during parallel regression tests of 8.0.
for every command executed within a transaction. For long transactions
this was a significant memory leak. Instead, we can delete a portal's
or subtransaction's ResourceOwner immediately, if we physically transfer
the information about its locks up to the parent owner. This does not
fully solve the leak problem; we need to do something about counting
multiple acquisitions of the same lock in order to fix it. But it's a
necessary step along the way.
updates are no longer WAL-logged nor even fsync'd; we do not need to,
since after a crash no old pg_subtrans data is needed again. We truncate
pg_subtrans to RecentGlobalXmin at each checkpoint. slru.c's API is
refactored a little bit to separate out the necessary decisions.
RecentXmin (== MyProc->xmin). This ensures that it will be safe to
truncate pg_subtrans at RecentGlobalXmin, which should largely eliminate
any fear of bloat. Along the way, eliminate SubTransXidsHaveCommonAncestor,
which isn't really needed and could not give a trustworthy result anyway
under the lookback restriction.
In an unrelated but nearby change, #ifdef out GetUndoRecPtr, which has
been dead code since 2001 and seems unlikely to ever be resurrected.
and doesn't process forward slashes in the same way as external
commands. Quoting the first argument to COPY does not convert forward
to backward slashes, but COPY does properly process quoted forward
slashes in the second argument.
Win32 COPY works with quoted forward slashes in the first argument only if the
current directory is the same as the directory of the first argument.
for transaction commits that occurred just before the checkpoint. This is
an EXTREMELY serious bug --- kudos to Satoshi Okada for creating a
reproducible test case to prove its existence.
slashes to backslashes #ifdef WIN32. This is to cope with the fact
that Windows seems exceedingly unfriendly to slashes in shell commands,
as per recent discussion.
and history files as per recent discussion. While at it, remove
pg_terminate_backend, since we have decided we do not have time during
this release cycle to address the reliability concerns it creates.
Split the 'Miscellaneous Functions' documentation section into
'System Information Functions' and 'System Administration Functions',
which hopefully will draw the eyes of those looking for such things.
Tom Lane
Bruce Momjian
Teodor Sigaev
Neil Conway
Peter Eisentraut
Tatsuo Ishii
PostgreSQL Daemon