VACUUM's reference page had this text, but ANALYZE's didn't. That's
a clear oversight given that section 5.7 explicitly delegates the
responsibility to define permissions requirements to the individual
commands' man pages.
Per gripe from Isaac Morland. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMsGm5fp3oBUs-2iRfii0iEO=fZuJALVyM2zJLhNTjG34gpAVQ@mail.gmail.com
In serializable mode, heap_hot_search_buffer() incorrectly acquired a
predicate lock on the root tuple, not the returned tuple that satisfied
the visibility checks. As explained in README-SSI, the predicate lock does
not need to be copied or extended to other tuple versions, but for that to
work, the correct, visible, tuple version must be locked in the first
place.
The original SSI commit had this bug in it, but it was fixed back in 2013,
in commit 81fbbfe335. But unfortunately, it was reintroduced a few months
later in commit b89e151054. Wising up from that, add a regression test
to cover this, so that it doesn't get reintroduced again. Also, move the
code that sets 't_self', so that it happens at the same time that the
other HeapTuple fields are set, to make it more clear that all the code in
the loop operate on the "current" tuple in the chain, not the root tuple.
Bug spotted by Andres Freund, analysis and original fix by Thomas Munro,
test case and some additional changes to the fix by Heikki Linnakangas.
Backpatch to all supported versions (9.4).
Discussion: https://www.postgresql.org/message-id/20190731210630.nqhszuktygwftjty%40alap3.anarazel.de
When parsing a timetz string with a dynamic timezone abbreviation or a
timezone not specified, it was possible to generate incorrect timestamps
based on a date which uses some non-initialized variables if the input
string did not specify fully a date to parse. This is already checked
when a full timezone spec is included in the input string, but the two
other cases mentioned above missed the same checks.
This gets fixed by generating an error as this input is invalid, or in
short when a date is not fully specified.
Valgrind was complaining about this problem.
Bug: #15910
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15910-2eba5106b9aa0c61@postgresql.org
Backpatch-through: 9.4
contrib/intarray considers "arraycol <@ constant-array" to be indexable,
but its GiST opclass code fails to reliably find index entries for empty
array values (which of course should trivially match such queries).
This is because the test condition to see whether we should descend
through a non-leaf node is wrong.
Unfortunately, empty array entries could be anywhere in the index,
as these index opclasses are currently designed. So there's no way
to fix this except by lobotomizing <@ indexscans to scan the whole
index ... which is what this patch does. That's pretty unfortunate:
the performance is now actually worse than a seqscan, in most cases.
We'd be better off to remove <@ from the GiST opclasses entirely,
and perhaps a future non-back-patchable patch will do so.
In the meantime, applications whose performance is adversely impacted
have a couple of options. They could switch to a GIN index, which
doesn't have this bug, or they could replace "arraycol <@ constant-array"
with "arraycol <@ constant-array AND arraycol && constant-array".
That will provide about the same performance as before, and it will find
all non-empty subsets of the given constant-array, which is all that
could reliably be expected of the query before.
While at it, add some more regression test cases to improve code
coverage of contrib/intarray.
In passing, adjust resize_intArrayType so that when it's returning an
empty array, it uses construct_empty_array for that rather than
cowboy hacking on the input array. While the hack produces an array
that looks valid for most purposes, it isn't bitwise equal to empty
arrays produced by other code paths, which could have subtle odd
effects. I don't think this code path is performance-critical
enough to justify such shortcuts. (Back-patch this part only as far
as v11; before commit 01783ac36 we were not careful about this in
other intarray code paths either.)
Back-patch the <@ fixes to all supported versions, since this was
broken from day one.
Patch by me; thanks to Alexander Korotkov for review.
Discussion: https://postgr.es/m/458.1565114141@sss.pgh.pa.us
src/test/kerberos and src/test/ldap try to run private authentication
servers, which of course might fail. The logs from these servers
were being dropped into the tmp_check/ subdirectory, but they should
be put in tmp_check/log/, because the buildfarm will only capture
log files in that subdirectory. Without the log output there's
little hope of diagnosing buildfarm failures related to these servers.
Backpatch to v11 where these test suites were added.
Discussion: https://postgr.es/m/16017.1565047605@sss.pgh.pa.us
Commit bf6c614a2 rearranged the lookup of the comparison operators
needed in a hashed subplan, and in so doing, broke the cross-type
case: it caused the original LHS-vs-RHS operator to be used to compare
hash table entries too (which of course are all of the RHS type).
This leads to C functions being passed a Datum that is not of the
type they expect, with the usual hazards of crashes and unauthorized
server memory disclosure.
For the set of hashable cross-type operators present in v11 core
Postgres, this bug is nearly harmless on 64-bit machines, which
may explain why it escaped earlier detection. But it is a live
security hazard on 32-bit machines; and of course there may be
extensions that add more hashable cross-type operators, which
would increase the risk.
Reported by Andreas Seltenreich. Back-patch to v11 where the
problem came in.
Security: CVE-2019-10209
Commit aa27977fe2 introduced this
restriction for pg_temp.function_name(arg); do likewise for types
created in temporary schemas. Programs that this breaks should add
"pg_temp." schema qualification or switch to arg::type_name syntax.
Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane. Reported by Tom Lane.
Security: CVE-2019-10208
Perl has multiple internal representations of "undef", and just
testing for SvTYPE(x) == SVt_NULL doesn't recognize all of them,
leading to "cannot transform this Perl type to jsonb" errors.
Use the approved test SvOK() instead.
Report and patch by Ivan Panchenko. Back-patch to v11 where
this module was added.
Discussion: https://postgr.es/m/1564783533.324795401@f193.i.mail.ru
src/test/kerberos and src/test/ldap need to run a private authentication
server of the relevant type, for which they need a free TCP port.
They were just picking a random port number in 48K-64K, which works
except when something's already using the particular port. Notably,
the probability of failure rises dramatically if one simply runs those
tests in a tight loop, because each test cycle leaves behind a bunch of
high ports that are transiently in TIME_WAIT state.
To fix, split out the code that PostgresNode.pm already had for
identifying a free TCP port number, so that it can be invoked to choose
a port for the KDC or LDAP server. This isn't 100% bulletproof, since
conceivably something else on the machine could grab the port between
the time we check and the time we actually start the server. But that's
a pretty short window, so in practice this should be good enough.
Back-patch to v11 where these test suites were added.
Patch by me, reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/3397.1564872168@sss.pgh.pa.us
When querying a partitioned table containing a default partition, we
were wrongly deciding to include it in the scan too early in the
process, failing to exclude it in some cases. If we reinterpret the
PruneStepResult.scan_default flag slightly, we can do a better job at
detecting that it can be excluded. The change is that we avoid setting
the flag for that pruning step unless the step absolutely requires the
default partition to be scanned (in contrast with the previous
arrangement, which was to set it unless the step was able to prune it).
So get_matching_partitions() must explicitly check the partition that
each returned bound value corresponds to in order to determine whether
the default one needs to be included, rather than relying on the flag
from the final step result.
Author: Yuzuko Hosoya <hosoya.yuzuko@lab.ntt.co.jp>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Discussion: https://postgr.es/m/00e601d4ca86$932b8bc0$b982a340$@lab.ntt.co.jp
When piling up loading of modules using check_password_hook_type,
loading passwordcheck would remove any trace of a previously-loaded
hook. Unloading the module would also cause previous hooks to be
entirely gone.
Reported-by: Rafael Castro
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15932-78f48f9ef166778c@postgresql.org
Backpatch-through: 9.4
Since pg_dump doesn't treat the member operators and functions of operator
classes/families (that is, the pg_amop and pg_amproc entries, not the
underlying operators/functions) as separate dumpable objects, it missed
their dependency information. I think this was safe when the code was
designed, because the default object sorting rule emits operators and
functions before opclasses, and there were no dependency types that could
mess that up. However, the introduction of range types in 9.2 broke it:
now a type can have a dependency on an opclass, allowing dependency rules
to push the opclass before the type and hence before custom operators.
Lacking any information showing that it shouldn't do so, pg_dump emitted
the objects in the wrong order.
Fix by teaching getDependencies() to translate pg_depend entries for
pg_amop/amproc rows to look like dependencies for their parent opfamily.
I added a regression test for this in HEAD/v12, but not further back;
life is too short to fight with 002_pg_dump.pl.
Per bug #15934 from Tom Gottfried. Back-patch to all supported branches.
Discussion: https://postgr.es/m/15934-58b8c8ab7a09ea15@postgresql.org
This has been wrong ever since pg_rewind was added. The if-branch just
above this, where we print the same error with an extra message supplied
by XLogReadRecord() got this right, but the variable name was wrong in the
else-branch. As a consequence, the error printed the WAL position as
0/0 if there was an error reading a WAL file.
Backpatch to 9.5, where pg_rewind was added.
When performing ANALYZE on inheritance trees, we collect two samples for
each relation - one for the relation alone, and one for the inheritance
subtree (relation and its child relations). And then we build statistics
on each sample, so for each relation we get two sets of statistics.
For regular (per-column) statistics this works fine, because the catalog
includes a flag differentiating statistics built from those two samples.
But we don't have such flag in the extended statistics catalogs, and we
ended up updating the same row twice, triggering this error:
ERROR: tuple already updated by self
The simplest solution is to disable extended statistics on inheritance
trees, which is what this commit is doing. In the future we may need to
do something similar to per-column statistics, but that requires adding a
flag to the catalog - and that's not backpatchable. Moreover, the current
selectivity estimation code only works with individual relations, so
building statistics on inheritance trees would be pointless anyway.
Author: Tomas Vondra
Backpatch-to: 10-
Discussion: https://postgr.es/m/20190618231233.GA27470@telsasoft.com
Reported-by: Justin Pryzby
A "break" statement erroneously left behind by commit a1c1af2a1
caused TopoSort to do the wrong thing if a lock's wait list
contained multiple members of the same locking group.
Because parallel workers don't normally need any locks not already
taken by their leader, this is very hard --- maybe impossible ---
to hit in production. Still, if it did happen, the queries involved
in an otherwise-resolvable deadlock would block until canceled.
In addition to removing the bogus "break", add an Assert showing
that the conflicting uses of the beforeConstraints[] array (for both
counts and flags) don't overlap, and add some commentary explaining
why not; because it's not obvious without explanation, IMHO.
Original report and patch from Rui Hai Jiang; additional assert
and commentary by me. Back-patch to 9.6 where the bug came in.
Discussion: https://postgr.es/m/CAEri+mLd3bpHLyW+a9pSe1y=aEkeuJpwBSwvo-+m4n7-ceRmXw@mail.gmail.com
Early previews of LLVM 9 reveal that our Min() macro causes compiler
errors in LLVM headers reached by the #include directives in
llvmjit_inline.cpp. Let's just undefine it. Per buildfarm animal
seawasp. Back-patch to 11.
Reviewed-by: Fabien Coelho, Tom Lane
Discussion: https://postgr.es/m/20190606173216.GA6306%40alvherre.pgsql
The table has not been updated for some commands introduced in recent
releases, so refresh it. While on it, reorder entries alphabetically.
Backpatch all the way down for all the commands which have gone
missing.
Reported-by: Jeremy Smith
Discussion: https://postgr.es/m/15883-afff0ea3cc2dbbb6@postgresql.org
Backpatch-through: 9.4
pgbench would sometimes get stuck waiting forever after its last
client thread terminated, due to failing to check for there being
nothing more to wait for.
Bug introduced during refactoring in v10 (I didn't bother to try to
assign blame to a specific commit). It's already repaired in
HEAD/v12 thanks to commit 3bac77c48, but v10 and v11 need this fix.
Fabien Coelho, per report from Tomas Vondra; reviewed by
Yoshikazu Imai
Discussion: https://postgr.es/m/cc5d76c1-6144-bbed-ad1b-961d13d88f3b@2ndquadrant.com
pg_timezone_names() tries to avoid showing the "Factory" zone in
the view, mainly because that has traditionally had a very long
"abbreviation" such as "Local time zone must be set--see zic manual page",
so that showing it messes up psql's formatting of the whole view.
Since tzdb version 2016g, IANA instead uses the abbreviation "-00",
which is sane enough that there's no reason to discriminate against it.
On the other hand, it emerges that FreeBSD and possibly other packagers
are so wedded to backwards compatibility that they hack the IANA data
to keep the old spelling --- and not just that old spelling, but even
older spellings that IANA used back in the stone age. This caused the
filter logic to fail to suppress "Factory" at all on such platforms,
though the formatting problem is definitely real in that case.
To solve both problems, get rid of the hard-wired assumption about
exactly what Factory's abbreviation is, and instead reject abbreviations
exceeding 31 characters. This will allow Factory to appear in the view
if and only if it's using the modern abbreviation.
In passing, simplify the code we add to zic.c to support "zic -P"
to remove its now-obsolete hacks to not print the Factory zone's
abbreviation. Unlike pg_timezone_names(), there's no reason for
that code to support old/nonstandard timezone data.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Discussion: https://postgr.es/m/3961.1564086915@sss.pgh.pa.us
Some platforms create a file named "localtime" in the system
timezone directory, making it a copy or link to the active time
zone file. If Postgres is built with --with-system-tzdata, initdb
will see that file as an exact match to localtime(3)'s behavior,
and it may decide that "localtime" is the most preferred spelling of
the active zone. That's a very bad choice though, because it's
neither informative, nor portable, nor stable if someone changes
the system timezone setting. Extend the preference logic added by
commit e3846a00c so that we will prefer any other zone file that
matches localtime's behavior over "localtime".
On the same logic, also discriminate against "posixrules", which
is another not-really-a-zone file that is often present in the
timezone directory. (Since we install "posixrules" but not
"localtime", this change can affect the behavior of Postgres
with or without --with-system-tzdata.)
Note that this change doesn't prevent anyone from choosing these
pseudo-zones if they really want to (i.e., by setting TZ for initdb,
or modifying the timezone GUC later on). It just prevents initdb
from preferring these zone names when there are multiple matches to
localtime's behavior.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Discussion: https://postgr.es/m/CADT4RqCCnj6FKLisvT8tTPfTP4azPhhDFJqDF1JfBbOH5w4oyQ@mail.gmail.com
Discussion: https://postgr.es/m/27991.1560984458@sss.pgh.pa.us
Money values exceeding about 18 digits (depending on lc_monetary)
could be inaccurately converted to numeric, due to select_div_scale()
deciding it didn't need to compute any fractional digits. Force
its hand by setting the dscale of one division input to equal the
number of fractional digits we need.
In passing, rearrange the logic to not do useless work in locales
where money values are considered integral.
Per bug #15925 from Slawomir Chodnicki. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15925-da9953e2674bb5c8@postgresql.org
After starting slapd, wait until it can accept a connection before
beginning the real test work. This avoids occasional test failures.
Back-patch to 11, where the LDAP tests arrived.
Author: Thomas Munro
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20190719033013.GI1859%40paquier.xyz
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
As of Fedora 30, it seems that the system-provided macros for setting
up user privileges in SELinux policies don't grant the ability to read
/etc/passwd, as they formerly did. This restriction breaks psql
(which tries to use getpwuid() to obtain the user name it's running
under) and thereby the contrib/sepgsql regression test. Add explicit
specifications that we need the right to read /etc/passwd.
Mike Palmiotto, per a report from me. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/23856.1563381159@sss.pgh.pa.us
describeOneTableDetails issued a partition-constraint-fetching query
for every table, even ones it knows perfectly well are not partitions.
To add insult to injury, it then proceeded to leak the empty PGresult
if the table wasn't a partition. Doing that a lot of times might
amount to a meaningful leak, so this seems like a back-patchable bug.
Fix that, and also fix a related PGresult leak in the partition-parent
case (though that leak would occur only if we got no row, which is
unexpected).
Minor code beautification too, to make this code look more like the
pre-existing code around it.
Back-patch the whole change into v12. However, the fact that we already
know whether the table is a partition dates only to commit 1af25ca0c;
back-patching the relevant changes from that is probably more churn
than is justified in released branches. Hence, in v11 and v10, just
do the minimum to fix the PGresult leaks.
Noted while messing around with adjacent code for yesterday's \d
improvements.
Windows hosts do not normally come with expr, so instead of using that
to test the \setshell command, use echo instead, which is fairly
universally available.
Backpatch to release 11, where this came in.
Problem found by me, patch by Fabien Coelho.
Using pg_receivewal with synchronous_commit = remote_apply set in the
backend is incompatible if pg_receivewal is a synchronous standby as it
never applies WAL, so document this problem and solutions to it.
Backpatch to 9.6, where remote_apply has been added.
Author: Robert Haas, Jesper Pedersen
Reviewed-by: Laurenz Albe, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/1427a2d3-1e51-9335-1931-4f8853d90d5e@redhat.com
Backpatch-through: 9.6
Slow buildfarm machines have run into issues with this TAP test caused
by a race condition related to the startup of a set of standbys, where
it is possible to finish with an unexpected order in the WAL sender
array of the primary.
This closes the race condition by making sure that any standby started
is registered into the WAL sender array of the primary before starting
the next one based on lookups of pg_stat_replication.
Backpatch down to 9.6 where the test has been introduced.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Noah Misch
Discussion: https://postgr.es/m/20190617055145.GB18917@paquier.xyz
Backpatch-through: 9.6
If the user creates a deferred constraint in a partition, and in a
transaction they cause the constraint's trigger execution to be deferred
until commit time *and* drop the constraint, then when commit time comes
the queued trigger will fail to run because the trigger object will have
been dropped.
This is explained because when a constraint gets dropped in a
partitioned table, the recursion to drop the ones in partitions is done
by the dependency mechanism, not by ALTER TABLE traversing the recursion
tree as in all other cases. In the non-partitioned case, this problem
is avoided by checking that the table is not "in use" by alter-table;
other alter-table subcommands that recurse to partitions do that check
for each partition. But the dependency mechanism doesn't have a way to
do that. Fix the problem by applying the same check to all partitions
during ALTER TABLE's "prep" phase, which correctly raises the necessary
error.
Reported-by: Rajkumar Raghuwanshi <rajkumar.raghuwanshi@enterprisedb.com>
Discussion: https://postgr.es/m/CAKcux6nZiO9-eEpr1ZD84bT1mBoVmeZkfont8iSpcmYrjhGWgA@mail.gmail.com
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Discussion: https://postgr.es/m/CA+u7OA4JKCPFrdrAbOs7XBiCyD61XJxeNav4LefkSmBLQ-Vobg@mail.gmail.com
Discussion: https://postgr.es/m/31920.1562526703@sss.pgh.pa.us
Solely relying on a relation's reltuples/relpages estimate to size the
Bloom filters used by amcheck verification makes verification less
effective when the estimates are very stale. In extreme cases,
verification options that use Bloom filters internally could be totally
ineffective, without users receiving any clear indication that certain
types of corruption might easily be missed.
To fix, use RelationGetNumberOfBlocks() instead of relpages to size the
downlink block Bloom filter. Use the same RelationGetNumberOfBlocks()
value to derive a minimum size for the heapallindexed Bloom filter,
rather than completely trusting reltuples. Verification will still be
reasonably effective when the projected/estimated number of Bloom filter
elements is at least 1/5 of the final number of elements, which is
assured by the new sizing logic.
Reported-By: Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-Wzk0ke2J42KrNYBKu0Xovjy-sU5ub7PWjgpbsKdAQcL4OA@mail.gmail.com
Backpatch: 11-, where downlink/heapallindexed verification were added.
Absorb commit e5e04c962a5d12eebbf867ca25905b3ccc34cbe0 from upstream
IANA code, in hopes of silencing warnings from MSVC about negating
a bool value.
Discussion: https://postgr.es/m/20190719035347.GJ1859@paquier.xyz
16828d5 has improved ALTER TABLE so as a column addition does not
require a rewrite for a non-NULL default with constant expressions, but
one spot in the documentation did not get updated consistently.
The documentation also now clarifies the fact that this does not apply
if the expression is volatile, where a table rewrite is still required.
Reported-by: Daniel Westermann
Author: Ian Barwick
Reviewed-by: Michael Paquier, Daniel Westermann
Discussion: https://postgr.es/m/DB6PR0902MB2184C7D5645CF15D75EB7957D2CF0@DB6PR0902MB2184.eurprd09.prod.outlook.com
Backpatch-through: 11
The values 'infinity' and '-infinity' are a part of the DATE type
itself, so a bound of the date 'infinity' is not the same as an
unbounded/infinite range. However, it is still wrong to try to
canonicalize such values, because adding or subtracting one has no
effect. Fix by treating 'infinity' and '-infinity' the same as
unbounded ranges for the purposes of canonicalization (but not other
purposes).
Backpatch to all versions because it is inconsistent with the
documented behavior. Note that this could be an incompatibility for
applications relying on the behavior contrary to the documentation.
Author: Laurenz Albe
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/77f24ea19ab802bc9bc60ddbb8977ee2d646aec1.camel%40cybertec.at
Backpatch-through: 9.4
Commit 857f9c36cd, which taught nbtree VACUUM to avoid unnecessary
index scans, bumped the nbtree version number from 2 to 3, while adding
the ability for nbtree indexes to be upgraded on-the-fly. Various
assertions that assumed that an nbtree index was always on version 2 had
to be changed to accept any supported version (version 2 or 3 on
Postgres 11).
However, a few assertions were missed in the initial commit, all of
which were in code paths that cache a local copy of the metapage
metadata, where the index had been expected to be on the current version
(no longer version 2) as a generic sanity check. Rather than simply
update the assertions, follow-up commit 0a64b45152 intentionally made
the metapage caching code update the per-backend cached metadata version
without changing the on-disk version at the same time. This could even
happen when the planner needed to determine the height of a B-Tree for
costing purposes. The assertions only fail on Postgres v12 when
upgrading from v10, because they were adjusted to use the authoritative
shared memory metapage by v12's commit dd299df8.
To fix, remove the cache-only upgrade mechanism entirely, and update the
assertions themselves to accept any supported version (go back to using
the cached version in v12). The fix is almost a full revert of commit
0a64b45152 on the v11 branch.
VACUUM only considers the authoritative metapage, and never bothers with
a locally cached version, whereas everywhere else isn't interested in
the metapage fields that were added by commit 857f9c36cd. It seems
unlikely that this bug has affected any user on v11.
Reported-By: Christoph Berg
Bug: #15896
Discussion: https://postgr.es/m/15896-5b25e260fdb0b081%40postgresql.org
Backpatch: 11-, where VACUUM was taught to avoid unnecessary index scans.
A large fraction of this diff is just due to upstream's somewhat
random decision to rename a bunch of internal variables and struct
fields. However, there is an interesting new feature in zic:
it's grown a "-b slim" option that emits zone files without 32-bit
data and other backwards-compatibility hacks. We should consider
whether we wish to enable that.
