Introduce parallel-aware hash joins that appear in EXPLAIN plans as Parallel
Hash Join with Parallel Hash. While hash joins could already appear in
parallel queries, they were previously always parallel-oblivious and had a
partial subplan only on the outer side, meaning that the work of the inner
subplan was duplicated in every worker.
After this commit, the planner will consider using a partial subplan on the
inner side too, using the Parallel Hash node to divide the work over the
available CPU cores and combine its results in shared memory. If the join
needs to be split into multiple batches in order to respect work_mem, then
workers process different batches as much as possible and then work together
on the remaining batches.
The advantages of a parallel-aware hash join over a parallel-oblivious hash
join used in a parallel query are that it:
* avoids wasting memory on duplicated hash tables
* avoids wasting disk space on duplicated batch files
* divides the work of building the hash table over the CPUs
One disadvantage is that there is some communication between the participating
CPUs which might outweigh the benefits of parallelism in the case of small
hash tables. This is avoided by the planner's existing reluctance to supply
partial plans for small scans, but it may be necessary to estimate
synchronization costs in future if that situation changes. Another is that
outer batch 0 must be written to disk if multiple batches are required.
A potential future advantage of parallel-aware hash joins is that right and
full outer joins could be supported, since there is a single set of matched
bits for each hashtable, but that is not yet implemented.
A new GUC enable_parallel_hash is defined to control the feature, defaulting
to on.
Author: Thomas Munro
Reviewed-By: Andres Freund, Robert Haas
Tested-By: Rafia Sabih, Prabhat Sahu
Discussion:
https://postgr.es/m/CAEepm=2W=cOkiZxcg6qiFQP-dHUe09aqTrEMM7yJDrHMhDv_RA@mail.gmail.comhttps://postgr.es/m/CAEepm=37HKyJ4U6XOLi=JgfSHM3o6B-GaeO-6hkOmneTDkH+Uw@mail.gmail.com
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
For some reason, we have never accounted for either the evaluation cost
or the selectivity of filter conditions attached to Agg and Group nodes
(which, in practice, are always conditions from a HAVING clause).
Applying our regular selectivity logic to post-grouping conditions is a
bit bogus, but it's surely better than taking the selectivity as 1.0.
Perhaps someday the extended-statistics mechanism can be taught to provide
statistics that would help us in getting non-default estimates here.
Per a gripe from Benjamin Coutu. This is surely a bug fix, but I'm
hesitant to back-patch because of the prospect of destabilizing existing
plan choices. Given that it took us this long to notice the bug, it's
probably not hurting too many people in the field.
Discussion: https://postgr.es/m/20968.1509486337@sss.pgh.pa.us
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
Allowing arrays with a domain type as their element type was left un-done
in the original domain patch, but not for any very good reason. This
omission leads to such surprising results as array_agg() not working on
a domain column, because the parser can't identify a suitable output type
for the polymorphic aggregate.
In order to fix this, first clean up the APIs of coerce_to_domain() and
some internal functions in parse_coerce.c so that we consistently pass
around a CoercionContext along with CoercionForm. Previously, we sometimes
passed an "isExplicit" boolean flag instead, which is strictly less
information; and coerce_to_domain() didn't even get that, but instead had
to reverse-engineer isExplicit from CoercionForm. That's contrary to the
documentation in primnodes.h that says that CoercionForm only affects
display and not semantics. I don't think this change fixes any live bugs,
but it makes things more consistent. The main reason for doing it though
is that now build_coercion_expression() receives ccontext, which it needs
in order to be able to recursively invoke coerce_to_target_type().
Next, reimplement ArrayCoerceExpr so that the node does not directly know
any details of what has to be done to the individual array elements while
performing the array coercion. Instead, the per-element processing is
represented by a sub-expression whose input is a source array element and
whose output is a target array element. This simplifies life in
parse_coerce.c, because it can build that sub-expression by a recursive
invocation of coerce_to_target_type(). The executor now handles the
per-element processing as a compiled expression instead of hard-wired code.
The main advantage of this is that we can use a single ArrayCoerceExpr to
handle as many as three successive steps per element: base type conversion,
typmod coercion, and domain constraint checking. The old code used two
stacked ArrayCoerceExprs to handle type + typmod coercion, which was pretty
inefficient, and adding yet another array deconstruction to do domain
constraint checking seemed very unappetizing.
In the case where we just need a single, very simple coercion function,
doing this straightforwardly leads to a noticeable increase in the
per-array-element runtime cost. Hence, add an additional shortcut evalfunc
in execExprInterp.c that skips unnecessary overhead for that specific form
of expression. The runtime speed of simple cases is within 1% or so of
where it was before, while cases that previously required two levels of
array processing are significantly faster.
Finally, create an implicit array type for every domain type, as we do for
base types, enums, etc. Everything except the array-coercion case seems
to just work without further effort.
Tom Lane, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/9852.1499791473@sss.pgh.pa.us
These variables are only ever written to in assertion-enabled builds,
and the latest Microsoft compilers complain about such variables in
non-assertion-enabled builds.
Apparently they don't worry so much about variables that are written to
but not read from, so most of our PG_USED_FOR_ASSERTS_ONLY variables
don't cause the problem.
Discussion: https://postgr.es/m/7800.1505950322@sss.pgh.pa.us
The executor is capable of splitting buckets during a hash join if
too much memory is being used by a small number of buckets. However,
this only helps if a bucket's population is actually divisible; if
all the hash keys are alike, the tuples still end up in the same
new bucket. This can result in an OOM failure if there are enough
inner keys with identical hash values. The planner's cost estimates
will bias it against choosing a hash join in such situations, but not
by so much that it will never do so. To mitigate the OOM hazard,
explicitly estimate the hash bucket space needed by just the inner
side's most common value, and if that would exceed work_mem then
add disable_cost to the hash cost estimate.
This approach doesn't account for the possibility that two or more
common values would share the same hash value. On the other hand,
work_mem is normally a fairly conservative bound, so that eating
two or more times that much space is probably not going to kill us.
If we have no stats about the inner side, ignore this consideration.
There was some discussion of making a conservative assumption, but that
would effectively result in disabling hash join whenever we lack stats,
which seems like an overreaction given how seldom the problem manifests
in the field.
Per a complaint from David Hinkle. Although this could be viewed
as a bug fix, the lack of similar complaints weighs against back-
patching; indeed we waited for v11 because it seemed already rather
late in the v10 cycle to be making plan choice changes like this one.
Discussion: https://postgr.es/m/32013.1487271761@sss.pgh.pa.us
Add missing infrastructure for this node type, notably in ruleutils.c where
its lack could demonstrably cause EXPLAIN to fail. Add outfuncs/readfuncs
support. (outfuncs support is useful today for debugging purposes. The
readfuncs support may never be needed, since at present it would only
matter for parallel query and NextValueExpr should never appear in a
parallelizable query; but it seems like a bad idea to have a primnode type
that isn't fully supported here.) Teach planner infrastructure that
NextValueExpr is a volatile, parallel-unsafe, non-leaky expression node
with cost cpu_operator_cost. Given its limited scope of usage, there
*might* be no live bug today from the lack of that knowledge, but it's
certainly going to bite us on the rear someday. Teach pg_stat_statements
about the new node type, too.
While at it, also teach cost_qual_eval() that MinMaxExpr, SQLValueFunction,
XmlExpr, and CoerceToDomain should be charged as cpu_operator_cost.
Failing to do this for SQLValueFunction was an oversight in my commit
0bb51aa96. The others are longer-standing oversights, but no time like the
present to fix them. (In principle, CoerceToDomain could have cost much
higher than this, but it doesn't presently seem worth trying to examine the
domain's constraints here.)
Modify execExprInterp.c to execute NextValueExpr as an out-of-line
function; it seems quite unlikely to me that it's worth insisting that
it be inlined in all expression eval methods. Besides, providing the
out-of-line function doesn't stop anyone from inlining if they want to.
Adjust some places where NextValueExpr support had been inserted with the
aid of a dartboard rather than keeping it in the same order as elsewhere.
Discussion: https://postgr.es/m/23862.1499981661@sss.pgh.pa.us
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
David Rowley found that the "use the smallest per-column selectivity"
heuristic applied in some cases by get_foreign_key_join_selectivity()
was badly off if the FK columns are independent, producing estimates
much worse than we got before that code was added in 9.6.
One case where that heuristic was used was for LEFT and FULL outer joins
with the referenced rel on the outside of the join. But we should not
really need to special-case those here. eqjoinsel() never has had such a
special case; the correction is applied by calc_joinrel_size_estimate()
instead. Let's just estimate such cases like inner joins and rely on that
later adjustment. (I think there was something of a thinko here, in that
the comments seem to be thinking about the selectivity as defined for
semi/anti joins; but that shouldn't apply to left/full joins.) Add a
regression test exercising such a case to show that this is sane in
at least some cases.
The other case where we used that heuristic was for SEMI/ANTI outer joins,
either if the referenced rel was on the outside, or if it was on the inside
but was part of a join within the RHS. In either case, the FK doesn't give
us a lot of traction towards estimating the selectivity. To ensure that
we don't have regressions from what happened before 9.6, let's punt by
ignoring the FK in such cases and applying the traditional selectivity
calculation. (We might be able to improve on that later, but for now
I just want to be sure it's not worse than 9.5.)
Report and patch by David Rowley, simplified a bit by me. Back-patch
to 9.6 where this code was added.
Discussion: https://postgr.es/m/CAKJS1f8NO8oCDcxrteohG6O72uU1saEVT9qX=R8pENr5QWerXw@mail.gmail.com
When costing a nestloop with stop-at-first-inner-match semantics, and a
non-indexscan inner path, final_cost_nestloop() wants to charge the full
scan cost of the inner rel at least once, with additional scans charged
at inner_rescan_run_cost which might be less. However the logic for
doing this effectively assumed that outer_matched_rows is at least 1.
If it's zero, which is not unlikely for a small outer rel, we ended up
charging inner_run_cost plus N times inner_rescan_run_cost, as much as
double the correct charge for an outer rel with only one row that
we're betting won't be matched. (Unless the inner rel is materialized,
in which case it has very small inner_rescan_run_cost and the cost
is not so far off what it should have been.)
The upshot of this was that the planner had a tendency to select plans
that failed to make effective use of the stop-at-first-inner-match
semantics, and that might have Materialize nodes in them even when the
predicted number of executions of the Materialize subplan was only 1.
This was not so obvious before commit 9c7f5229a, because the case only
arose in connection with semi/anti joins where there's not freedom to
reverse the join order. But with the addition of unique-inner joins,
it could result in some fairly bad planning choices, as reported by
Teodor Sigaev. Indeed, some of the test cases added by that commit
have plans that look dubious on closer inspection, and are changed
by this patch.
Fix the logic to ensure that we don't charge for too many inner scans.
I chose to adjust it so that the full-freight scan cost is associated
with an unmatched outer row if possible, not a matched one, since that
seems like a better model of what would happen at runtime.
This is a longstanding bug, but given the lesser impact in back branches,
and the lack of field complaints, I won't risk a back-patch.
Discussion: https://postgr.es/m/CAKJS1f-LzkUsFxdJ_-Luy38orQ+AdEXM5o+vANR+-pHAWPSecg@mail.gmail.com
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
Follow on patch in the multi-variate statistics patch series.
CREATE STATISTICS s1 WITH (dependencies) ON (a, b) FROM t;
ANALYZE;
will collect dependency stats on (a, b) and then use the measured
dependency in subsequent query planning.
Commit 7b504eb282 added
CREATE STATISTICS with n-distinct coefficients. These are now
specified using the mutually exclusive option WITH (ndistinct).
Author: Tomas Vondra, David Rowley
Reviewed-by: Kyotaro HORIGUCHI, Álvaro Herrera, Dean Rasheed, Robert Haas
and many other comments and contributions
Discussion: https://postgr.es/m/56f40b20-c464-fad2-ff39-06b668fac47c@2ndquadrant.com
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
Commit 51ee6f3160 accidentally changed
the behavior around inheritance hierarchies; before, we always
considered parallel paths even for very small inheritance children,
because otherwise an inheritance hierarchy with even one small child
wouldn't be eligible for parallelism. That exception was inadverently
removed; put it back.
In passing, also adjust the degree-of-parallelism comptuation for
index-only scans not to consider the number of heap pages fetched.
Otherwise, we'll avoid parallel index-only scans on tables that are
mostly all-visible, which isn't especially logical.
Robert Haas and Amit Kapila, per a report from Ashutosh Sharma.
Discussion: http://postgr.es/m/CAE9k0PmgSoOHRd60SHu09aRVTHRSs8s6pmyhJKWHxWw9C_x+XA@mail.gmail.com
Fallout from fcec6caafa2: mark a variable in
set_tablefunc_size_estimates as used for asserts only.
Also, the planner_rte_fetch() call is pointless with assertions
disabled, so enclose it in a USE_ASSERT_CHECKING #ifdef; fix the same
problem in set_subquery_size_estimates().
First problem noted by David Rowley, whose compiler is noisier than mine
in this regard.
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
Currently, we only need this logic in order to cost a Bitmap Heap
Scan. But a pending patch for Parallel Bitmap Heap Scan also uses
it to help figure out how many workers to use for the scan, which
has to be determined prior to costing. So, move the logic to
a separate function to make that easier.
Dilip Kumar. The patch series of which this is a part has been
reviewed by Andres Freund, Amit Khendekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, and me; it is not clear from the email
discussion which of those people have looked specifically at this
part.
Discussion: http://postgr.es/m/CAFiTN-v3QYNJEZnnmKCeATuLbN-h9tMVfeEF0+BrouYDqjXgwg@mail.gmail.com
For a partial path, the cardinality estimate needs to reflect the
number of rows we think each worker will see, rather than the total
number of rows; otherwise, costing will go wrong. The previous coding
got this completely wrong for parallel joins.
Unfortunately, this change may destabilize plans for users of 9.6 who
have enabled parallel query, but since 9.6 is still fairly new I'm
hoping expectations won't be too settled yet. Also, this is really a
brown-paper-bag bug, so leaving it unfixed for the entire lifetime of
9.6 seems unwise.
Related reports (whose import I initially failed to recognize) by
Tomas Vondra and Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoaDxZ5z5Kw_oCQoymNxNoVaTCXzPaODcOuao=CzK8dMZw@mail.gmail.com
This case wasn't thought through sufficiently in commit 100340e2d.
It's true that the FK proves that every outer row has a match in the
inner table, but we forgot that some of the inner rows might be filtered
away by WHERE conditions located within the semijoin's RHS.
If the RHS is just one table, we can reasonably take the semijoin
selectivity as equal to the fraction of the referenced table's rows
that are expected to survive its restriction clauses.
If the RHS is a join, it's not clear how much of the referenced table
might get through the join, so fall back to the same rule we were
already using for other outer-join cases: use the minimum of the
regular per-clause selectivity estimates. This gives the same result
as if we hadn't considered the FK at all when there's a single FK
column, but it should still help for multi-column FKs, which is the
case that 100340e2d is really meant to help with.
Back-patch to 9.6 where the previous commit came in.
Discussion: https://postgr.es/m/16149.1481835103@sss.pgh.pa.us
Commit 7a2fe9bd0 improved merge append so that replacement of a tuple
takes log(N) operations, not twice log(N). Since cost_merge_append knew
about that explicitly, we should adjust it. This probably makes little
difference in practice, but the obsolete comment is confusing.
Ideally this would have been put in in 9.3 with the underlying behavior
change; but I'm not going to back-patch it, since there's some small chance
of changing a plan choice that somebody's optimized for.
Thomas Munro
Discussion: <CAEepm=0WQBSvuYcMOUj4Ga4NXpu2J=ejZcE=e=eiTjTX-6_gDw@mail.gmail.com>
cost_rescan assumed that we don't need to rebuild the hash table when
rescanning a hash join. However, that's currently only true for
single-batch joins; for a multi-batch join we must charge full freight.
This probably has escaped notice because we'd be unlikely to put a hash
join on the inside of a nestloop anyway. Nonetheless, it's wrong.
Fix in HEAD, but don't backpatch for fear of destabilizing plans in
stable releases.
I'd been wondering why I was sometimes seeing fractional rowcount
estimates in parallel-query situations, and this seems to be the
reason. (You won't see the fractional parts in EXPLAIN, because it
prints rowcounts with %.0f, but they are apparent in the debugger.)
A fractional rowcount is not any saner for a partial path than any
other kind of path, and it's equally likely to break cost estimation
for higher paths, so apply clamp_row_est() like we do in other places.
VS2013 apparently has a problem with taking the address of a formal
parameter in some cases. We do that elsewhere without trouble, but
in this case the address is being passed to a subroutine that will
probably get inlined, so maybe the combination of those things is
what tickles the bug. Anyway, introducing an extra copy of the
parameter value is enough to work around it. Per trouble report
from Umair Shahid.
Report: <CAM184AcjqKYZSdQqBHDrnENXHhW=mXbUC46QYPJ=nAh0gUHCGA@mail.gmail.com>
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
Discussion is still underway as to whether to revert the entire patch
that added this function, but that discussion may not conclude before
beta1. So, in the meantime, let's do at least this much.
David Rowley
Change max_parallel_degree default from 0 to 2. It is possible that
this is not a good idea, or that we should go with 1 worker rather
than 2, but we won't find out without trying it. Along the way,
reword the documentation for max_parallel_degree a little bit to
hopefully make it more clear.
Discussion: 20160420174631.3qjjhpwsvvx5bau5@alap3.anarazel.de
We still use replacement selection for the first run of the sort only
and only when the number of tuples is relatively small. Otherwise,
the first run, and subsequent runs in all cases, are produced using
quicksort. This tends to be faster except perhaps for very small
amounts of working memory.
Peter Geoghegan, reviewed by Tomas Vondra, Jeff Janes, Mithun Cy,
Greg Stark, and me.
In cases where joins use multiple columns we currently assess each join
separately causing gross mis-estimates for join cardinality.
This patch adds use of FK information for the first time into the
planner. When FKs are present and we have multi-column join information,
plan estimates will be drastically improved. Cases with multiple FKs
are handled, though partial matches are ignored currently.
Net effect is substantial performance improvements for joins in many
common cases. Additional planning time is isolated to cases that are
currently performing poorly, measured at 0.08 - 0.15 ms.
Please watch for planner performance regressions; circumstances seem
unlikely but the law of unintended consequences may apply somewhen.
Additional complex tests welcome to prove this before release.
Tests can be performed using SET enable_fkey_estimates = on | off
using scripts provided during Hackers discussions, message id:
552335D9.3090707@2ndquadrant.com
Authors: Tomas Vondra and David Rowley
Reviewed and tested by Simon Riggs, adding comments only
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
cost_subplan() supposed that the given subplan must have plan_rows > 0,
which as far as I can tell was true until recent refactoring of the
code in createplan.c; but now that code allows the Result for a provably
empty subquery to have plan_rows = 0. Rather than undo that change,
put in a clamp to prevent zero divide.
get_cheapest_fractional_path() likewise supposed that best_path->rows > 0.
This assumption has been wrong for longer. It's actually harmless given
IEEE float math, because a positive value divided by zero gives +Infinity
and compare_fractional_path_costs() will do the right thing with that.
Still, best not to assume that.
final_cost_nestloop() also seems to have some risks in this area, so
borrow the clamping logic already present in the mergejoin cost functions.
Lastly, remove unnecessary clamp_row_est() in planner.c's calls to
get_number_of_groups(). The only thing that function does with path_rows
is pass it to estimate_num_groups() which already has an internal clamp,
so we don't need the extra call; and if we did, the callers are arguably
the wrong place for it anyway.
First two items reported by Piotr Stefaniak, the others are products
of my nosing around for similar problems. No back-patch since there's
no evidence that problems arise in the back branches.
Parallel workers can now partially aggregate the data and pass the
transition values back to the leader, which can combine the partial
results to produce the final answer.
David Rowley, based on earlier work by Haribabu Kommi. Reviewed by
Álvaro Herrera, Tomas Vondra, Amit Kapila, James Sewell, and me.
In commit 19a541143a I did not make PathTarget a subtype of Node,
and embedded a RelOptInfo's reltarget directly into it rather than having
a separately-allocated Node. In hindsight that was misguided
micro-optimization, enabled by the fact that at that point we didn't have
any Paths with custom PathTargets. Now that PathTarget processing has
been fleshed out some more, it's easier to see that it's better to have
PathTarget as an indepedent Node type, even if it does cost us one more
palloc to create a RelOptInfo. So change it while we still can.
This commit just changes the representation, without doing anything more
interesting than that.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
The core innovation of this patch is the introduction of the concept
of a partial path; that is, a path which if executed in parallel will
generate a subset of the output rows in each process. Gathering a
partial path produces an ordinary (complete) path. This allows us to
generate paths for parallel joins by joining a partial path for one
side (which at the baserel level is currently always a Partial Seq
Scan) to an ordinary path on the other side. This is subject to
various restrictions at present, especially that this strategy seems
unlikely to be sensible for merge joins, so only nested loops and
hash joins paths are generated.
This also allows an Append node to be pushed below a Gather node in
the case of a partitioned table.
Testing revealed that early versions of this patch made poor decisions
in some cases, which turned out to be caused by the fact that the
original cost model for Parallel Seq Scan wasn't very good. So this
patch tries to make some modest improvements in that area.
There is much more to be done in the area of generating good parallel
plans in all cases, but this seems like a useful step forward.
Patch by me, reviewed by Dilip Kumar and Amit Kapila.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
Add a new flag, consider_parallel, to each RelOptInfo, indicating
whether a plan for that relation could conceivably be run inside of
a parallel worker. Right now, we're pretty conservative: for example,
it might be possible to defer applying a parallel-restricted qual
in a worker, and later do it in the leader, but right now we just
don't try to parallelize access to that relation. That's probably
the right decision in most cases, anyway.
Using the new flag, generate parallel sequential scan plans for plain
baserels, meaning that we now have parallel sequential scan in
PostgreSQL. The logic here is pretty unsophisticated right now: the
costing model probably isn't right in detail, and we can't push joins
beneath Gather nodes, so the number of plans that can actually benefit
from this is pretty limited right now. Lots more work is needed.
Nevertheless, it seems time to enable this functionality so that all
this code can actually be tested easily by users and developers.
Note that, if you wish to test this functionality, it will be
necessary to set max_parallel_degree to a value greater than the
default of 0. Once a few more loose ends have been tidied up here, we
might want to consider changing the default value of this GUC, but
I'm leaving it alone for now.
Along the way, fix a bug in cost_gather: the previous coding thought
that a Gather node's transfer overhead should be costed on the basis of
the relation size rather than the number of tuples that actually need
to be passed off to the leader.
Patch by me, reviewed in earlier versions by Amit Kapila.
In addition, this path fills in a number of missing bits and pieces in
the parallel infrastructure. Paths and plans now have a parallel_aware
flag indicating whether whatever parallel-aware logic they have should
be engaged. It is believed that we will need this flag for a number of
path/plan types, not just sequential scans, which is why the flag is
generic rather than part of the SeqScan structures specifically.
Also, execParallel.c now gives parallel nodes a chance to initialize
their PlanState nodes from the DSM during parallel worker startup.
Amit Kapila, with a fair amount of adjustment by me. Review of previous
patch versions by Haribabu Kommi and others.
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
If we have a semijoin, say
SELECT * FROM x WHERE x1 IN (SELECT y1 FROM y)
and we're estimating the cost of a parameterized indexscan on x, the number
of repetitions of the indexscan should not be taken as the size of y; it'll
really only be the number of distinct values of y1, because the only valid
plan with y on the outside of a nestloop would require y to be unique-ified
before joining it to x. Most of the time this doesn't make that much
difference, but sometimes it can lead to drastically underestimating the
cost of the indexscan and hence choosing a bad plan, as pointed out by
David Kubečka.
Fixing this is a bit difficult because parameterized indexscans are costed
out quite early in the planning process, before we have the information
that would be needed to call estimate_num_groups() and thereby estimate the
number of distinct values of the join column(s). However we can move the
code that extracts a semijoin RHS's unique-ification columns, so that it's
done in initsplan.c rather than on-the-fly in create_unique_path(). That
shouldn't make any difference speed-wise and it's really a bit cleaner too.
The other bit of information we need is the size of the semijoin RHS,
which is easy if it's a single relation (we make those estimates before
considering indexscan costs) but problematic if it's a join relation.
The solution adopted here is just to use the product of the sizes of the
join component rels. That will generally be an overestimate, but since
estimate_num_groups() only uses this input as a clamp, an overestimate
shouldn't hurt us too badly. In any case we don't allow this new logic
to produce a value larger than we would have chosen before, so that at
worst an overestimate leaves us no wiser than we were before.
This code relied on pointer equality to identify which restriction clauses
also appear in the indexquals (and, therefore, don't need to be applied as
simple filter conditions). That was okay once upon a time, years ago,
before we introduced the equivalence-class machinery. Now there's about a
50-50 chance that an equality clause appearing in the indexquals will be
the mirror image (commutator) of its mate in the restriction list. When
that happens, we'd erroneously think that the clause would be re-evaluated
at each visited row, and therefore inflate the cost estimate for the
indexscan by the clause's cost.
Add some logic to catch this case. It seems to me that it continues not to
be worthwhile to expend the extra predicate-proof work that createplan.c
will do on the finally-selected plan, but this case is common enough and
cheap enough to handle that we should do so.
This will make a small difference (about one cpu_operator_cost per row)
in simple cases; but in situations where there's an expensive function in
the indexquals, it can make a very large difference, as seen in recent
example from Jeff Janes.
This is a long-standing bug, but I'm hesitant to back-patch because of the
possibility of destabilizing plan choices that people may be happy with.
This requires changing quite a few places that were depending on
sizeof(HeapTupleHeaderData), but it seems for the best.
Michael Paquier, some adjustments by me
This allows extension modules to define their own methods for
scanning a relation, and get the core code to use them. It's
unclear as yet how much use this capability will find, but we
won't find out if we never commit it.
KaiGai Kohei, reviewed at various times and in various levels
of detail by Shigeru Hanada, Tom Lane, Andres Freund, Álvaro
Herrera, and myself.
This reverts commit ee1e5662d8, as well as
a remarkably large number of followup commits, which were mostly concerned
with the fact that the implementation didn't work terribly well. It still
doesn't: we probably need some rather basic work in the GUC infrastructure
if we want to fully support GUCs whose default varies depending on the
value of another GUC. Meanwhile, it also emerged that there wasn't really
consensus in favor of the definition the patch tried to implement (ie,
effective_cache_size should default to 4 times shared_buffers). So whack
it all back to where it was. In a followup commit, I'll do what was
recently agreed to, which is to simply change the default to a higher
value.
The previous method was overly complex and underly correct; in particular,
by assigning the default value with PGC_S_OVERRIDE, it prevented later
attempts to change the setting in postgresql.conf, as noted by Jeff Janes.
We should just assign the default value with source PGC_S_DYNAMIC_DEFAULT,
which will have the desired priority relative to the boot_val as well as
user-set values.
There is still a gap in this method: if there's an explicit assignment of
effective_cache_size = -1 in the postgresql.conf file, and that assignment
appears before shared_buffers is assigned, the code will substitute 4 times
the bootstrap default for shared_buffers, and that value will then persist
(since it will have source PGC_S_FILE). I don't see any very nice way
to avoid that though, and it's not a case to be expected in practice.
The existing comments in guc-file.l look forward to a redesign of the
DYNAMIC_DEFAULT mechanism; if that ever happens, we should consider this
case as one of the things we'd like to improve.
Fix integer overflow issue noted by Magnus Hagander, as well as a bunch
of other infelicities in commit ee1e5662d8
and its unreasonably large number of followups.
This patch adds the ability to write TABLE( function1(), function2(), ...)
as a single FROM-clause entry. The result is the concatenation of the
first row from each function, followed by the second row from each
function, etc; with NULLs inserted if any function produces fewer rows than
others. This is believed to be a much more useful behavior than what
Postgres currently does with multiple SRFs in a SELECT list.
This syntax also provides a reasonable way to combine use of column
definition lists with WITH ORDINALITY: put the column definition list
inside TABLE(), where it's clear that it doesn't control the ordinality
column as well.
Also implement SQL-compliant multiple-argument UNNEST(), by turning
UNNEST(a,b,c) into TABLE(unnest(a), unnest(b), unnest(c)).
The SQL standard specifies TABLE() with only a single function, not
multiple functions, and it seems to require an implicit UNNEST() which is
not what this patch does. There may be something wrong with that reading
of the spec, though, because if it's right then the spec's TABLE() is just
a pointless alternative spelling of UNNEST(). After further review of
that, we might choose to adopt a different syntax for what this patch does,
but in any case this functionality seems clearly worthwhile.
Andrew Gierth, reviewed by Zoltán Böszörményi and Heikki Linnakangas, and
significantly revised by me
The planner largely failed to consider the possibility that a
PlaceHolderVar's expression might contain a lateral reference to a Var
coming from somewhere outside the PHV's syntactic scope. We had a previous
report of a problem in this area, which I tried to fix in a quick-hack way
in commit 4da6439bd8, but Antonin Houska
pointed out that there were still some problems, and investigation turned
up other issues. This patch largely reverts that commit in favor of a more
thoroughly thought-through solution. The new theory is that a PHV's
ph_eval_at level cannot be higher than its original syntactic level. If it
contains lateral references, those don't change the ph_eval_at level, but
rather they create a lateral-reference requirement for the ph_eval_at join
relation. The code in joinpath.c needs to handle that.
Another issue is that createplan.c wasn't handling nested PlaceHolderVars
properly.
In passing, push knowledge of lateral-reference checks for join clauses
into join_clause_is_movable_to. This is mainly so that FDWs don't need
to deal with it.
This patch doesn't fix the original join-qual-placement problem reported by
Jeremy Evans (and indeed, one of the new regression test cases shows the
wrong answer because of that). But the PlaceHolderVar problems need to be
fixed before that issue can be addressed, so committing this separately
seems reasonable.
This is SQL-standard with a few extensions, namely support for
subqueries and outer references in clause expressions.
catversion bump due to change in Aggref and WindowFunc.
David Fetter, reviewed by Dean Rasheed.
In commit 0f61d4dd1b, I added code to copy up
column width estimates for each column of a subquery. That code supposed
that the subquery couldn't have any output columns that didn't correspond
to known columns of the current query level --- which is true when a query
is parsed from scratch, but the assumption fails when planning a view that
depends on another view that's been redefined (adding output columns) since
the upper view was made. This results in an assertion failure or even a
crash, as per bug #8025 from lindebg. Remove the Assert and instead skip
the column if its resno is out of the expected range.
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
Re-allow subquery pullup for LATERAL subqueries, except when the subquery
is below an outer join and contains lateral references to relations outside
that outer join. If we pull up in such a case, we risk introducing lateral
cross-references into outer joins' ON quals, which is something the code is
entirely unprepared to cope with right now; and I'm not sure it'll ever be
worth coping with.
Support lateral refs in VALUES (this seems to be the only additional path
type that needs such support as a consequence of re-allowing subquery
pullup).
Put in a slightly hacky fix for joinpath.c's refusal to consider
parameterized join paths even when there cannot be any unparameterized
ones. This was causing "could not devise a query plan for the given query"
failures in queries involving more than two FROM items.
Put in an even more hacky fix for distribute_qual_to_rels() being unhappy
with join quals that contain references to rels outside their syntactic
scope; which is to say, disable that test altogether. Need to think about
how to preserve some sort of debugging cross-check here, while not
expending more cycles than befits a debugging cross-check.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
We made use of the ROWS estimate for set-returning functions used in FROM,
but not for those used in SELECT targetlists; which is a bit of an
oversight considering there are common usages that require the latter
approach. Improve that. (I had initially thought it might be worth
folding this into cost_qual_eval, but after investigation concluded that
that wouldn't be very helpful, so just do it separately.) Per complaint
from David Johnston.
Back-patch to 9.2, but not further, for fear of destabilizing plan choices
in existing releases.
This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate. We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.
In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage. This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.
To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing. This is required at both base scans and joins. It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree. Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.
cost_index's method for estimating per-tuple costs of evaluating filter
conditions (a/k/a qpquals) was completely wrong in the presence of derived
indexable conditions, such as range conditions derived from a LIKE clause.
This was largely masked in common cases as a result of all simple operator
clauses having about the same costs, but it could show up in a big way when
dealing with functional indexes containing expensive functions, as seen for
example in bug #6579 from Istvan Endredy. Rejigger the calculation to give
sane answers when the indexquals aren't a subset of the baserestrictinfo
list. As a side benefit, we now do the calculation properly for cases
involving join clauses (ie, parameterized indexscans), which we always
overestimated before.
There are still cases where this is an oversimplification, such as clauses
that can be dropped because they are implied by a partial index's
predicate. But we've never accounted for that in cost estimates before,
and I'm not convinced it's worth the cycles to try to do so.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
Further reflection shows that a single callback isn't very workable if we
desire to let FDWs generate multiple Paths, because that forces the FDW to
do all work necessary to generate a valid Plan node for each Path. Instead
split the former PlanForeignScan API into three steps: GetForeignRelSize,
GetForeignPaths, GetForeignPlan. We had already bit the bullet of breaking
the 9.1 FDW API for 9.2, so this shouldn't cause very much additional pain,
and it's substantially more flexible for complex FDWs.
Add an fdw_private field to RelOptInfo so that the new functions can save
state there rather than possibly having to recalculate information two or
three times.
In addition, we'd not thought through what would be needed to allow an FDW
to set up subexpressions of its choice for runtime execution. We could
treat ForeignScan.fdw_private as an executable expression but that seems
likely to break existing FDWs unnecessarily (in particular, it would
restrict the set of node types allowable in fdw_private to those supported
by expression_tree_walker). Instead, invent a separate field fdw_exprs
which will receive the postprocessing appropriate for expression trees.
(One field is enough since it can be a list of expressions; also, we assume
the corresponding expression state tree(s) will be held within fdw_state,
so we don't need to add anything to ForeignScanState.)
Per review of Hanada Shigeru's pgsql_fdw patch. We may need to tweak this
further as we continue to work on that patch, but to me it feels a lot
closer to being right now.
This patch fixes the planner so that it can generate nestloop-with-
inner-indexscan plans even with one or more levels of joining between
the indexscan and the nestloop join that is supplying the parameter.
The executor was fixed to handle such cases some time ago, but the
planner was not ready. This should improve our plans in many situations
where join ordering restrictions formerly forced complete table scans.
There is probably a fair amount of tuning work yet to be done, because
of various heuristics that have been added to limit the number of
parameterized paths considered. However, we are not going to find out
what needs to be adjusted until the code gets some real-world use, so
it's time to get it in there where it can be tested easily.
Note API change for index AM amcostestimate functions. I'm not aware of
any non-core index AMs, but if there are any, they will need minor
adjustments.
Bruce Momjian
Andres Freund
Robert Haas
Tom Lane
Andrew Dunstan
Simon Riggs
Kevin Grittner
Andrew Gierth
Alvaro Herrera
Peter Eisentraut
Heikki Linnakangas
Noah Misch