The 028_pitr_timelines.pl test would sometimes hang, waiting for a WAL
segment that was just filled up to be archived. It was because the
test used 'pg_stat_archiver.last_archived_wal' to check if a file was
archived, but the order that WAL files are archived when a standby is
promoted is not fully deterministic, and 'last_archived_wal' tracks
the last segment that was archived, not the highest-numbered WAL
segment. Because of that, if the archiver archived segment 3, and then
2, 'last_archived_wal' say 2, and the test query would think that 3
has not been archived yet.
Normally, WAL files are marked ready for archival in order, and the
archiver process will process them in order, so that issue doesn't
arise. We have used the same query on 'last_archived_wal' in a few
other tests with no problem. But when a standby is promoted, things
are a bit chaotic. After promotion, the server will try to archive all
the WAL segments from the old timeline that are in pg_wal, as well as
the history file and any new WAL segments on the new timeline. The
end-of-recovery checkpoint will create the .ready files for all the
WAL files on the old timeline, but at the same time, the new timeline
is opened up for business. A file from the new timeline can therefore
be archived before the files from the old timeline have been marked as
ready for archival.
It turns out that we don't really need to wait for the archival in
this particular test, because the standby server is about to be
stopped, and stopping a server will wait for the end-of-recovery
checkpoint and all WAL archivals to finish, anyway. So we can just
remove it from the test.
Add a note to the docs on 'pg_stat_archiver' view that files can be
archived out of order.
Reviewed-by: Tom Lane
Discussion: https://www.postgresql.org/message-id/3186114.1644960507@sss.pgh.pa.us
docbook-xsl's index generation stylesheet (autoidx.xsl) has a small bug: It
doesn't include xlink in exclude-result-prefixes. Normally just leads to a a
single xmlns:xlink in the <div> containing the index, but because our
customization emits that, xmlns:xlink intead gets added to every element
output by autoidx.xsl below the <div>, totalling around 100kB.
Adding the spurious xmlns:xlink to the <div> ourselves isn't great, but avoids
the duplication.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20220213201618.qz6p6noon3wagr3f%40alap3.anarazel.de
The XSL stylesheets used a mix of incorrect or outdated namespace
declarations for XHTML, probably based on ancient advice and examples.
Clean all this up.
Besides improving correctness (although probably no impact in
practice, other than possible validation failures), this removes a
bunch of useless namespace declarations in the HTML output.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/20220213201618.qz6p6noon3wagr3f%40alap3.anarazel.de
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
Previously we used poll() directly to check for a POLLRDHUP event.
Instead, use the WaitEventSet API to poll the socket for
WL_SOCKET_CLOSED, which knows how to detect this condition on many more
operating systems.
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
LZ4 compression can now be performed on the client using
pg_basebackup -Ft --compress client-lz4, and LZ4 decompression of
a backup compressed on the server can be performed on the client
using pg_basebackup -Fp --compress server-lz4.
Dipesh Pandit, reviewed and tested by Jeevan Ladhe and Tushar Ahuja,
with a few corrections - and some documentation - by me.
Discussion: http://postgr.es/m/CAN1g5_FeDmiA9D8wdG2W6Lkq5CpubxOAqTmd2et9hsinTJtsMQ@mail.gmail.com
LZ4 compression can be a lot faster than gzip compression, so users
may prefer it even if the compression ratio is not as good. We will
want pg_basebackup to support LZ4 compression and decompression on the
client side as well, and there is a pending patch for that, but it's
by a different author, so I am committing this part separately for
that reason.
Jeevan Ladhe, reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/CANm22Cg9cArXEaYgHVZhCnzPLfqXCZLAzjwTq7Fc0quXRPfbxA@mail.gmail.com
This extends the logical decoding to also decode sequence increments.
We differentiate between sequences created in the current (in-progress)
transaction, and sequences created earlier. This mixed behavior is
necessary because while sequences are not transactional (increments are
not subject to ROLLBACK), relfilenode changes are. So we do this:
* Changes for sequences created in the same top-level transaction are
treated as transactional, i.e. just like any other change from that
transaction, and discarded in case of a rollback.
* Changes for sequences created earlier are applied immediately, as if
performed outside any transaction. This applies also after ALTER
SEQUENCE, which may create a new relfilenode.
Moreover, if we ever get support for DDL replication, the sequence
won't exist until the transaction gets applied.
Sequences created in the current transaction are tracked in a simple
hash table, identified by a relfilenode. That means a sequence may
already exist, but if a transaction does ALTER SEQUENCE then the
increments for the new relfilenode will be treated as transactional.
For each relfilenode we track the XID of (sub)transaction that created
it, which is needed for cleanup at transaction end. We don't need to
check the XID to decide if an increment is transactional - if we find a
match in the hash table, it has to be the same transaction.
This requires two minor changes to WAL-logging. Firstly, we need to
ensure the sequence record has a valid XID - until now the the increment
might have XID 0 if it was the first change in a subxact. But the
sequence might have been created in the same top-level transaction. So
we ensure the XID is assigned when WAL-logging increments.
The other change is addition of "created" flag, marking increments for
newly created relfilenodes. This makes it easier to maintain the hash
table of sequences that need transactional handling.
Note: This is needed because of subxacts. A XID 0 might still have the
sequence created in a different subxact of the same top-level xact.
This does not include any changes to test_decoding and/or the built-in
replication - those will be committed in separate patches.
A patch adding decoding of sequences was originally submitted by Cary
Huang. This commit reworks various important aspects (e.g. the WAL
logging and transactional/non-transactional handling). However, the
original patch and reviews were very useful.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Commit 0ba281cb4b added a new syntax
for the BASE_BACKUP command, with extensible options, but maintained
support for the legacy syntax. This isn't important for PostgreSQL,
where pg_basebackup works with older server versions but not newer
ones, but it could in theory matter for out-of-core users of the
replication protocol.
Discussion on pgsql-hackers, however, suggests that no one is aware
of any out-of-core use of the BASE_BACKUP command, and the consensus
is in favor of removing support for the old syntax to simplify the
code, so do that.
Discussion: http://postgr.es/m/CA+TgmoazKcKUWtqVa0xZqSzbKgTH+X-aw4V7GyLD68EpDLMh8A@mail.gmail.com
Historically, the location of any files generated by pg_upgrade, as of
the per-database logs and internal dumps, has been the current working
directory, leaving all those files behind when using --retain or on a
failure.
Putting all those contents in a targeted subdirectory makes the whole
easier to debug, and simplifies the code in charge of cleaning up the
logs. Note that another reason is that this facilitates the move of
pg_upgrade to TAP with a fixed location for all the logs to grab if the
test fails repeatedly.
Initially, we thought about being able to specify the output directory
with a new option, but we have settled on using a subdirectory located
at the root of the new cluster's data folder, "pg_upgrade_output.d",
instead, as at the end the new data directory is the location of all the
data generated by pg_upgrade. There is a take with group permissions
here though: if the new data folder has been initialized with this
option, we need to create all the files and paths with the correct
permissions or a base backup taken after a pg_upgrade --retain would
fail, meaning that GetDataDirectoryCreatePerm() has to be called before
creating the log paths, before a couple of sanity checks on the clusters
and before getting the socket directory for the cluster's host settings.
The idea of the new location is based on a suggestion from Peter
Eisentraut.
Also thanks to Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson, Tom
Lane and Bruce Momjian for the discussion (in alphabetical order).
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211212025017.GN17618@telsasoft.com
A very well-informed user might deduce this from what we said already,
but I'd bet against it. Lay it out explicitly.
While here, rewrite the comment about tuple routing to be more
intelligible to an average SQL user.
Per bug #17395 from Alexander Lakhin. Back-patch to v11. (The text
in this area is different in v10 and I'm not sufficiently excited
about this point to adapt the patch.)
Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
Some cleanup for commit 54637508f8:
Reformat pg_database.dat to reflect the new field order. Also update
the corresponding example in bki.sgml. Reorder the way the fields are
filled in dbcommands.c to correspond to the new order.
The most meaningful flags are shown, which are the ones useful for the
user and for automating and extending the set of tests supported
currently by check_guc.
This script may actually be removed in the future, but we are not
completely sure yet if and how we want to support the remaining sanity
checks performed there, that are now integrated in the main regression
test suite as of this commit.
Thanks also to Peter Eisentraut and Kyotaro Horiguchi for the
discussion.
Bump catalog version.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211129030833.GJ17618@telsasoft.com
This patch improves tab completion's ability to deal with
valid variant spellings of SQL identifiers. Notably:
* Unquoted upper-case identifiers are now downcased as the backend
would do, allowing them to be completed correctly.
* Tab completion can now match identifiers that are quoted even
though they don't need to be; for example "f<TAB> now completes
to "foo" if that's the only available name. Previously, only
names that require quotes would be offered.
* Schema-qualified identifiers are now supported where SQL syntax
allows it; many lesser-used completion rules neglected this.
* Completion operations that refer back to some previously-typed
name (for example, to complete names of columns belonging to a
previously-mentioned table) now allow variant spellings of the
previous name too.
In addition, performance of tab completion queries has been
improved for databases containing many objects, although
you'd only be likely to notice with a heavily-loaded server.
Authors of future tab-completion patches should note that this
commit changes many details about how tab completion queries
must be written:
* Tab completion queries now deal in raw object names; do not
use quote_ident().
* The name-matching restriction in a query must now be written
as "outputcol LIKE '%s'", not "substring(outputcol,1,%d)='%s'".
* The SchemaQuery mechanism has been extended so that it can
handle queries that refer back to a previous name. Most completion
queries that do that should be converted to SchemaQuery form.
Only consider using a literal query if the previous name can
never be schema-qualified. Don't use a literal query if the
name-to-be-completed can validly be schema-qualified, either.
* Use set_completion_reference() to specify which word is the previous
name to consider, for either a SchemaQuery or a literal query.
* If you want to offer some keywords in addition to a query result
(for example, offer COLUMN in addition to column names after
"ALTER TABLE t RENAME"), do not use the old hack of tacking the
keywords on with UNION. Instead use the new QUERY_PLUS macros
to write such keywords separately from the query proper. The
"addon" macro arguments that used to be used for this purpose
are gone.
* If your query returns something that's not a SQL identifier
(such as an attribute number or enum label), use the new
QUERY_VERBATIM macros to prevent the result from incorrectly
getting double-quoted. You may still need to use quote_literal
in such a query, too.
Tom Lane and Haiying Tang
Discussion: https://postgr.es/m/a63cbd45e3884cf9b3961c2a6a95dcb7@G08CNEXMBPEKD05.g08.fujitsu.local
I had made it depend on superuser, but that seems clearly inferior.
Also document the permissions requirement in the straming replication
protocol section of the documentation, rather than only in the
section having to do with pg_basebackup.
Idea and patch from Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/87bkzw160u.fsf@wibble.ilmari.org
If you have a low-bandwidth connection between the client and the
server, it's reasonable to want to compress on the server side but
then decompress and extract the backup on the client side. This
commit allows you do to do just that.
Dipesh Pandit, with minor and mostly cosmetic changes by me.
Discussion: http://postgr.es/m/CAN1g5_HiSh8ajUMd4ePtGyCXo89iKZTzaNyzP_qv1eJbi4YHXA@mail.gmail.com
The original text on refreshing collation versions was written
specifically for ICU, and then information for other providers was
incrementally tacked on at the end. Reword this to be a bit more
general and less reflective of how it was added.
This changes the data type of the catalog fields datcollate, datctype,
collcollate, and collctype from name to text. There wasn't ever a
really good reason for them to be of type name; presumably this was
just carried over from when they were fixed-size fields in pg_control,
first into the corresponding pg_database fields, and then to
pg_collation. The values are not identifiers or object names, and we
don't ever look them up that way.
Changing to type text saves space in the typical case, since locale
names are typically only a few bytes long. But it is also possible
that an ICU locale name with several customization options appended
could be longer than 63 bytes, so this also enables that case, which
was previously probably broken.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a@2ndquadrant.com
With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays largely the same, although we have to
rely on INCLUDEPY instead of the deprecated get_python_inc function.
Note that sysconfig exists since Python 2.7, so this moves the minimum
required version up from Python 2.6. Also, sysconfig didn't exist in
Python 3.1, so the minimum 3.x version is now 3.2.
We should consider back-patching this if it gives no further trouble,
as the no-longer-supported versions are old enough to probably not
be interesting to anyone.
Peter Eisentraut, Tom Lane, Andres Freund
Discussion: https://postgr.es/m/c74add3c-09c4-a9dd-1a03-a846e5b2fc52@enterprisedb.com
Commit 0ad8032910 failed to update
the pg_basebackup documentation to mention that "client-" or
"server-" can now be prepended to the compression method name. Fix
it there, and also in the --help output that you get from running
the binary.
Also in the documentation, there's an old issue that the arguments to
--checkpoint shouldn't be marked as parameters, because "fast" and
"spread" are literal strings. Fix that too.
Dagfinn Ilmari Mannsåker, partly as per a report from
Shinoda Noriyoshi.
Discussion: http://postgr.es/m/PH7PR84MB1885C1CF433057807551172BEE5F9@PH7PR84MB1885.NAMPRD84.PROD.OUTLOOK.COM
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4b.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
These functions aren't exact inverses, but they're closely related;
yet we document them in two different sections. Add cross-ref
<link>s to improve that situation.
While here, move the strpos and substr entries to re-alphabetize
Table 9.10. Also, drop an ancient compatibility note about
string_to_array, which wasn't even on the right page, so probably
few people ever saw it.
Discussion: https://postgr.es/m/164287017550.704.5840412183184961677@wrigleys.postgresql.org
The option --compress is extended to accept a compression method and an
optional compression level, as of the grammar METHOD[:LEVEL]. The
methods currently support are "none" and "gzip", for client-side
compression. Any of those methods use only an integer value for the
compression level, but any method implemented in the future could use
more specific keywords if necessary.
This commit keeps the logic backward-compatible. Hence, the following
compatibility rules apply for the new format of the option --compress:
* -z/--gzip is a synonym of --compress=gzip.
* --compress=NUM implies:
** --compress=none if NUM = 0.
** --compress=gzip:NUM if NUM > 0.
Note that there are also plans to extend more this grammar with
server-side compression.
Reviewed-by: Robert Haas, Magnus Hagander, Álvaro Herrera, David
G. Johnston, Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
This avoids possibly selecting Python 2.x on systems that have
both Python 2 and Python 3. We used to feel that what "python"
links to is a user choice that we should honor. However, we're
about to cease support for Python 2, so users will no longer have
any choice of that sort. This small change is being made ahead
of the big Python-2-ectomy so that we can see how much of the
buildfarm is not yet prepared for that. Systems with only
Python 2 will continue to build that way, for now.
Discussion: https://postgr.es/m/2872c9a0-4b0a-1354-d5f6-94d6f85ba354@enterprisedb.com
If connectivity to the server has been lost or become flaky, the
user might well try to send a query cancel. It's highly annoying
if PQcancel hangs up in such a case, but that's exactly what's likely
to happen. To ameliorate this problem, apply the PGconn's
tcp_user_timeout and keepalives settings to the TCP connection used
to send the cancel. This should be safe on Unix machines, since POSIX
specifies that setsockopt() is async-signal-safe. We are guessing
that WSAIoctl(SIO_KEEPALIVE_VALS) is similarly safe on Windows.
(Note that at least in psql and our other frontend programs, there's
no safety issue involved anyway, since we run PQcancel in its own
thread rather than in a signal handler.)
Most of the value here comes from the expectation that tcp_user_timeout
will be applied as a connection timeout. That appears to happen on
Linux, even though its tcp(7) man page claims differently. The
keepalive options probably won't help much, but as long as we can
apply them for not much code, we might as well.
Jelte Fennema, reviewed by Fujii Masao and myself
Discussion: https://postgr.es/m/AM5PR83MB017870DE81FC84D5E21E9D1EF7AA9@AM5PR83MB0178.EURPRD83.prod.outlook.com
In the new approach, all files across all tablespaces are sent in a
single COPY OUT operation. The CopyData messages are no longer raw
archive content; rather, each message is prefixed with a type byte
that describes its purpose, e.g. 'n' signifies the start of a new
archive and 'd' signifies archive or manifest data. This protocol
is significantly more extensible than the old approach, since we can
later create more message types, though not without concern for
backward compatibility.
The new protocol sends a few things to the client that the old one
did not. First, it sends the name of each archive explicitly, instead
of letting the client compute it. This is intended to make it easier
to write future patches that might send archives in a format other
that tar (e.g. cpio, pax, tar.gz). Second, it sends explicit progress
messages rather than allowing the client to assume that progress is
defined by the number of bytes received. This will help with future
features where the server compresses the data, or sends it someplace
directly rather than transmitting it to the client.
The old protocol is still supported for compatibility with previous
releases. The new protocol is selected by means of a new
TARGET option to the BASE_BACKUP command. Currently, the
only supported target is 'client'. Support for additional
targets will be added in a later commit.
Patch by me. The patch set of which this is a part has had review
and/or testing from Jeevan Ladhe, Tushar Ahuja, Suraj Kharage,
Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
This reverts commit e0e567a106.
On various platforms, the new approach using the sysconfig module
reported incorrect values for the include directory, and so any
Python-related compilations failed. Revert for now and revisit later.
With Python 3.10, configure spits out warnings about the module
distutils.sysconfig being deprecated and scheduled for removal in
Python 3.12. Change the uses in configure to use the module sysconfig
instead. The logic stays the same.
Note that sysconfig exists since Python 2.7, so this moves the minimum
required version up from Python 2.6.
Discussion: https://www.postgresql.org/message-id/flat/c74add3c-09c4-a9dd-1a03-a846e5b2fc52%40enterprisedb.com
The logic is similar to default_tablespace in some ways, so as no SET
queries on default_table_access_method are generated before dumping or
restoring an object (table or materialized view support table AMs) when
specifying this new option.
This option is useful to enforce the use of a default access method even
if some tables included in a dump use an AM different than the system's
default.
There are already two cases in the TAP tests of pg_dump with a table and
a materialized view that use a non-default table AM, and these are
extended that the new option does not generate SET clauses on
default_table_access_method.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211207153930.GR17618@telsasoft.com
"jsonlog" is a new value that can be added to log_destination to provide
logs in the JSON format, with its output written to a file, making it
the third type of destination of this kind, after "stderr" and
"csvlog". The format is convenient to feed logs to other applications.
There is also a plugin external to core that provided this feature using
the hook in elog.c, but this had to overwrite the output of "stderr" to
work, so being able to do both at the same time was not possible. The
files generated by this log format are suffixed with ".json", and use
the same rotation policies as the other two formats depending on the
backend configuration.
This takes advantage of the refactoring work done previously in ac7c807,
bed6ed3, 8b76f89 and 2d77d83 for the backend parts, and 72b76f7 for the
TAP tests, making the addition of any new file-based format rather
straight-forward.
The documentation is updated to list all the keys and the values that
can exist in this new format. pg_current_logfile() also required a
refresh for the new option.
Author: Sehrope Sarkuni, Michael Paquier
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CAH7T-aqswBM6JWe4pDehi1uOiufqe06DJWaU5=X7dDLyqUExHg@mail.gmail.com
Add pg_statistic_ext_data.stxdinherit flag, so that for each extended
statistics definition we can store two versions of data - one for the
relation alone, one for the whole inheritance tree. This is analogous to
pg_statistic.stainherit, but we failed to include such flag in catalogs
for extended statistics, and we had to work around it (see commits
859b3003de, 36c4bc6e72 and 20b9fa308e).
This changes the relationship between the two catalogs storing extended
statistics objects (pg_statistic_ext and pg_statistic_ext_data). Until
now, there was a simple 1:1 mapping - for each definition there was one
pg_statistic_ext_data row, and this row was inserted while creating the
statistics (and then updated during ANALYZE). With the stxdinherit flag,
we don't know how many rows there will be (child relations may be added
after the statistics object is defined), so there may be up to two rows.
We could make CREATE STATISTICS to always create both rows, but that
seems wasteful - without partitioning we only need stxdinherit=false
rows, and declaratively partitioned tables need only stxdinherit=true.
So we no longer initialize pg_statistic_ext_data in CREATE STATISTICS,
and instead make that a responsibility of ANALYZE. Which is what we do
for regular statistics too.
Patch by me, with extensive improvements and fixes by Justin Pryzby.
Author: Tomas Vondra, Justin Pryzby
Reviewed-by: Tomas Vondra, Justin Pryzby
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
Since this test schedule is not run by default, it's next door to
unused. Moreover, its test coverage is very thin, and what there is
is just about entirely superseded by the src/test/recovery tests.
Let's drop it instead of carrying obsolete tests.
Discussion: https://postgr.es/m/3911012.1641246643@sss.pgh.pa.us
The log_autovacuum_min_duration instrumentation used its own dedicated
code for logging, which was not reused by VACUUM VERBOSE. This was
highly duplicative, and sometimes led to each code path using slightly
different accounting for essentially the same information.
Clean things up by making VACUUM VERBOSE reuse the same instrumentation
code. This code restructuring changes the structure of the VACUUM
VERBOSE output itself, but that seems like an overall improvement. The
most noticeable change in VACUUM VERBOSE output is that it no longer
outputs a distinct message per index per round of index vacuuming. Most
of the same information (about each index) is now shown in its new
per-operation summary message. This is far more legible.
A few details are no longer displayed by VACUUM VERBOSE, but that's no
real loss in practice, especially in the common case where we don't need
multiple index scans/rounds of vacuuming. This super fine-grained
information is still available via DEBUG2 messages, which might still be
useful in debugging scenarios.
VACUUM VERBOSE now shows new instrumentation, which is typically very
useful: all of the log_autovacuum_min_duration instrumentation that it
missed out on before now. This includes information about WAL overhead,
buffers hit/missed/dirtied information, and I/O timing information.
VACUUM VERBOSE still retains a few INFO messages of its own. This is
limited to output concerning the progress of heap rel truncation, as
well as some basic information about parallel workers. These details
are still potentially quite useful. They aren't a good fit for the log
output, which must summarize the whole operation.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmW4Me7_qR4X4ka7pxP-jGmn7=Npma_-Z-9Y1eD0MQRLw@mail.gmail.com
Add a new TAP test under src/test/recovery to run the standard
regression tests while a streaming replica replays the WAL. This
provides a basic workout for WAL decoding and redo code, and compares
the replicated result.
Optionally, enable (expensive) wal_consistency_checking if listed in
the env variable PG_TEST_EXTRA.
Reviewed-by: 綱川 貴之 (Takayuki Tsunakawa) <tsunakawa.takay@fujitsu.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
Provide a developer-only GUC allow_in_place_tablespaces, disabled by
default. When enabled, tablespaces can be created with an empty
LOCATION string, meaning that they should be created as a directory
directly beneath pg_tblspc. This can be used for new testing scenarios,
in a follow-up patch. Not intended for end-user usage, since it might
confuse backup tools that expect symlinks.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGKpRWQ9SxdxxDmTBCJoR0YnFpMBe7kyzY8SUQk%2BHeskxg%40mail.gmail.com
This commit changes the term "WAL receiver" to "WAL receiver (process)"
in the glossary, so that users can easily understand WAL receiver is
obviously a process.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/51b76596-ab4f-c9f0-1005-60ce1bb14b6b@oss.nttdata.com
Previously pg_log_backend_memory_contexts() could request to
log the memory contexts of backends, but not of auxiliary processes
such as checkpointer. This commit enhances the function so that
it can also send the request to auxiliary processes. It's useful to
look at the memory contexts of those processes for debugging purpose
and better understanding of the memory usage pattern of them.
Note that pg_log_backend_memory_contexts() cannot send the request
to logger or statistics collector. Because this logging request
mechanism is based on shared memory but those processes aren't
connected to that.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACU1nBzpacOK2q=a65S_4+Oaz_rLTsU1Ri0gf7YUmnmhfQ@mail.gmail.com
I had a brain fade in commit d32899157, and used 2:30AM as the
example timestamp for both spring-forward and fall-back cases.
But it's not actually ambiguous at all in the fall-back case,
because that transition is from 2AM to 1AM under USA rules.
Fix the example to use 1:30AM, which *is* ambiguous.
Noted while answering a question from Aleksander Alekseev.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/2191355.1641828552@sss.pgh.pa.us
Prevent logical replication workers from performing insert, update,
delete, truncate, or copy commands on tables unless the subscription
owner has permission to do so.
Prevent subscription owners from circumventing row-level security by
forbidding replication into tables with row-level security policies
which the subscription owner is subject to, without regard to whether
the policy would ordinarily allow the INSERT, UPDATE, DELETE or
TRUNCATE which is being replicated. This seems sufficient for now, as
superusers, roles with bypassrls, and target table owners should still
be able to replicate despite RLS policies. We can revisit the
question of applying row-level security policies on a per-row basis if
this restriction proves too severe in practice.
Author: Mark Dilger
Reviewed-by: Jeff Davis, Andrew Dunstan, Ronan Dunklau
Discussion: https://postgr.es/m/9DFC88D3-1300-4DE8-ACBC-4CEF84399A53%40enterprisedb.com
The ACL is printed when you add + to the command, similarly to
various other psql backslash commands.
Along the way, move the code for this into describe.c,
where it is a better fit (and can share some code).
Pavel Luzanov, reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/6d722115-6297-bc53-bb7f-5f150e765299@postgrespro.ru
The link used in the documentation is dead, and the only options to have
an access to this part of the SQL specification are not free. Like any
other books referred, just remove the link to keep some neutrality but
keep its reference.
Reported-by: Erik Rijkers
Discussion: https://postgr.es/m/989abd7d-af30-ab52-1201-bf0b4f33b872@xs4all.nl
Backpatch-through: 12
application_name that used when postgres_fdw establishes a connection to
a foreign server can be specified in either or both a connection parameter
of a server object and GUC postgres_fdw.application_name. This commit
allows those parameters to include escape sequences that begins with
% character. Then postgres_fdw replaces those escape sequences with
status information. For example, %d and %u are replaced with user name
and database name in local server, respectively. This feature enables us
to add information more easily to track remote transactions or queries,
into application_name of a remote connection.
Author: Hayato Kuroda
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Hou Zhijie, Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB5866FAE71C66547C64616584F5EB9@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
\getenv fetches the value of an environment variable into a psql
variable. This is the inverse of the \setenv command that was added
over ten years ago. We'd not seen a compelling use-case for \getenv
at the time, but upcoming regression test refactoring provides a
sufficient reason to add it now.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
This is an option consistent with what the other tools of src/bin/
(pg_checksums, pg_dump, pg_rewind and pg_basebackup) provide which is
useful for leveraging the I/O effort when testing things. This is not
to be used in a production environment.
All the regression tests of pg_upgrade are updated to use this new
option. This happens to cut at most a couple of seconds in environments
constrained on I/O, by avoiding a flush of data folder for the new
cluster upgraded.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/YbrhzuBmBxS/DkfX@paquier.xyz
postgres_fdw.application_name can be any string of any length
and contain even non-ASCII characters. However when it's passed
to and used as application_name in a foreign server, it's truncated
to less than NAMEDATALEN characters and any characters
other than printable ASCII ones in it will be replaced with question
marks. This commit adds these notes into the docs.
Author: Hayato Kuroda
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
Server versions for which there was a plausible reason to
use this switch are all out of support now. Leaving it
around would accomplish little except to let careless DBAs
shoot themselves in the foot.
Discussion: https://postgr.es/m/556122.1639520324@sss.pgh.pa.us
edc2332 has introduced in vcregress.pl some control on the environment
variables LZ4, TAR and GZIP_PROGRAM to allow any TAP tests to be able
use those commands. This makes the settings more consistent with
src/Makefile.global.in, as the same default gets used for Make and MSVC
builds.
Each parameter can be changed in buildenv.pl, but as a default gets
assigned after loading buldenv.pl, it is not possible to unset any of
these, and using an empty value would not work with "||=" either. As
some environments may not have a compatible command in their PATH (tar
coming from MinGW is an issue, for one), this could break tests without
an exit path to bypass any failing test. This commit changes things so
as the default values for LZ4, TAR and GZIP_PROGRAM are assigned before
loading buildenv.pl, not after. This way, we keep the same amount of
compatibility as a GNU build with the same defaults, and it becomes
possible to unset any of those values.
While on it, this adds some documentation about those three variables in
the section dedicated to the TAP tests for MSVC.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YbGYe483803il3X7@paquier.xyz
Backpatch-through: 10
Per discussion, we'll limit support for old servers to those branches
that can still be built easily on modern platforms, which as of now
is 9.2 and up.
Discussion: https://postgr.es/m/2923349.1634942313@sss.pgh.pa.us
Per discussion, we'll limit support for old servers to those branches
that can still be built easily on modern platforms, which as of now
is 9.2 and up. Remove over a thousand lines of code dedicated to
dumping from older server versions. (As in previous changes of
this sort, we aren't removing pg_restore's ability to read older
archive files ... though it's fair to wonder how that might be
tested nowadays.) This cleans up some dead code left behind by
commit 989596152.
Discussion: https://postgr.es/m/2923349.1634942313@sss.pgh.pa.us
In commit 791090bd7, I made an effort to fill in documentation
for all geometric operators listed in pg_operator. However,
it now appears that at least some of the omissions may have been
intentional, because some of those operator entries point at
unimplemented stub functions. Remove those from the docs again.
(In HEAD, poly_distance stays, because c5c192d7b just added an
implementation for it.)
Per complaint from Anton Voloshin.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
geo_ops.c contains half a dozen functions that are just stubs throwing
ERRCODE_FEATURE_NOT_SUPPORTED. Since it's been like that for more
than twenty years, there's clearly not a lot of interest in filling in
the stubs. However, I'm uncomfortable with deleting poly_distance(),
since every other geometric type supports a distance-to-another-object-
of-the-same-type function. We can easily add this capability by
cribbing from poly_overlap() and path_distance().
It's possible that the (existing) test case for this will show some
numeric instability, but hopefully the buildfarm will expose it if so.
In passing, improve the documentation to try to explain why polygons
are distinct from closed paths in the first place.
Discussion: https://postgr.es/m/3426566.1638832718@sss.pgh.pa.us
The idea here is that when a performance problem is known to have
occurred at a certain point in time, it's a good thing if there is
some information available from the logs to help figure out what
might have happened around that time.
This change attracted an above-average amount of dissent, because
it means that a server with default settings will produce some amount
of log output even if nothing has gone wrong. However, by my count,
the mailing list discussion had about twice as many people in favor
of the change as opposed. The reasons for believing that the extra
log output is not an issue in practice are: (1) the rate at which
messages can be generated by this setting is bounded to one every
few minutes on a properly-configured system and (2) production
systems tend to have a lot more junk in the log from that due to
failed connection attempts, ERROR messages generated by application
activity, and the like.
Bharath Rupireddy, reviewed by Fujii Masao and by me. Many other
people commented on the thread, but as far as I can see that was
discussion of the merits of the change rather than review of the
patch.
Discussion: https://postgr.es/m/CALj2ACX-rW_OeDcp4gqrFUAkf1f50Fnh138dmkd0JkvCNQRKGA@mail.gmail.com
Historically we've put type "char" into the S (String) typcategory,
although calling it a string is a stretch considering it can only
store one byte. (In our actual usage, it's more like an enum.)
This choice now seems wrong in view of the special heuristics
that parse_func.c and parse_coerce.c have for TYPCATEGORY_STRING:
it's not a great idea for "char" to have those preferential casting
behaviors.
Worse than that, recent patches inventing special-purpose types
like pg_node_tree have assigned typcategory S to those types,
meaning they also get preferential casting treatment that's designed
on the assumption that they can hold arbitrary text.
To fix, invent a new category TYPCATEGORY_INTERNAL for internal-use
types, and assign that to all these types. I used code 'Z' for
lack of a better idea ('I' was already taken).
This change breaks one query in psql/describe.c, which now needs to
explicitly cast a catalog "char" column to text before concatenating
it with an undecorated literal. Also, a test case in contrib/citext
now needs an explicit cast to convert citext to "char". Since the
point of this change is to not have "char" be a surprisingly-available
cast target, these breakages seem OK.
Per report from Ian Campbell.
Discussion: https://postgr.es/m/2216388.1638480141@sss.pgh.pa.us
List types numeric and timestamptz, which don't seem to have ever been
included here. Restore bigint, which was no-doubt-accidentally deleted
in v12. Fix some errors, or at least obsolete usages (nobody declares
float arguments as "float8*" anymore, even though they might be that
under the hood). Re-alphabetize. Remove the seeming claim that this
is a complete list of built-in types.
Per question from Oskar Stenberg.
Discussion: https://postgr.es/m/HE1PR03MB2971DE2527ECE1E99D6C19A8F96E9@HE1PR03MB2971.eurprd03.prod.outlook.com
Extend the foreign key ON DELETE actions SET NULL and SET DEFAULT by
allowing the specification of a column list, like
CREATE TABLE posts (
...
FOREIGN KEY (tenant_id, author_id) REFERENCES users ON DELETE SET NULL (author_id)
);
If a column list is specified, only those columns are set to
null/default, instead of all the columns in the foreign-key
constraint.
This is useful for multitenant or sharded schemas, where the tenant or
shard ID is included in the primary key of all tables but shouldn't be
set to null.
Author: Paul Martinez <paulmtz@google.com>
Discussion: https://www.postgresql.org/message-id/flat/CACqFVBZQyMYJV=njbSMxf+rbDHpx=W=B7AEaMKn8dWn9OZJY7w@mail.gmail.com
The chr() function used PG_GETARG_UINT32() even though the argument is
declared as (signed) integer. As a result, you can pass negative
arguments to this function and it internally interprets them as
positive. Ultimately ends up being harmless, but it seems wrong, so
fix this and rearrange the internal error checking a bit to
accommodate this.
Another case was in the documentation, where example code used
PG_GETARG_UINT32() with an argument declared as signed integer.
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://www.postgresql.org/message-id/flat/7e43869b-d412-8f81-30a3-809783edc9a3%40enterprisedb.com
ssl_crl_file and ssl_crl_dir are both used to for client certificate
revocation, not server certificates. The description for the params
could be easily misread to mean the opposite however, as evidenced
by the bugreport leading to this fix. Similarly, expand sslcrl and
and sslcrldir to explicitly mention server certificates. While there
also mention sslcrldir where previously only sslcrl was discussed.
Backpatch down to v10, with the CRL dir fixes down to 14 where they
were introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211202.135441.590555657708629486.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/CABWY_HCBUCjY1EJHrEGePGEaSZ5b29apgTohCyygtsqe_ySYng@mail.gmail.com
Backpatch-through: 10
Previously, pg_waldump would not display its statistics summary if it
got interrupted by SIGINT (or say a simple Ctrl+C). It gains with this
commit a signal handler for SIGINT, trapping the signal to exit at the
earliest convenience to allow a display of the stats summary before
exiting. This makes the reports more interactive, similarly to strace
-c.
This new behavior makes the combination of the options --stats and
--follow much more useful, so as the user will get a report for any
invocation of pg_waldump in such a case. Information about the LSN
range of the stats computed is added as a header to the report
displayed.
This implementation comes from a suggestion by Álvaro Herrera and
myself, following a complaint by the author of this patch about --stats
and --follow not being useful together originally.
As documented, this is not supported on Windows, though its support
would be possible by catching the terminal events associated to Ctrl+C,
for example (this may require a more centralized implementation, as
other tools could benefit from a common API).
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACUUx3PcK2z9h0_m7vehreZAUbcmOky9WSEpe8TofhV=PQ@mail.gmail.com
Commit 5a1007a508 changed the server
behavior, but I didn't notice that the existing behavior was
documented, and therefore did not update the documentation.
This commit does that.
I chose to mention that the behavior has changed rather than just
removing the reference to a deviation from a standard. It seemed
like that might be helpful to tool authors.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
ATTACHing a table into a partition tree whose root is published using a
publication with publish_via_partition_root set to true does not result in
the table's existing contents being replicated. This happens because
subscriber doesn't consider replicating the newly attached partition as
the root table is already in a 'ready' state.
This behavior was introduced in PG13 (83fd4532a7) where we allowed to
publish partition changes via ancestors.
We can consider fixing this limitation in the future.
Author: Amit Langote
Reviewed-by: Hou Zhijie, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/OS0PR01MB5716E97F00732B52DC2BBC2594989@OS0PR01MB5716.jpnprd01.prod.outlook.com
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
This commit adds a new system view pg_stat_subscription_workers, that
shows information about any errors which occur during the application of
logical replication changes as well as during performing initial table
synchronization. The subscription statistics entries are removed when the
corresponding subscription is removed.
It also adds an SQL function pg_stat_reset_subscription_worker() to reset
single subscription errors.
The contents of this view can be used by an upcoming patch that skips the
particular transaction that conflicts with the existing data on the
subscriber.
This view can be extended in the future to track other xact related
statistics like the number of xacts committed/aborted for subscription
workers.
Author: Masahiko Sawada
Reviewed-by: Greg Nancarrow, Hou Zhijie, Tang Haiying, Vignesh C, Dilip Kumar, Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Remove the confusing use of ORDER BY in an example materialized
view. It adds nothing to the example, but might encourage
people to follow bad practice. Clarify REFRESH MATERIALIZED
VIEW's note about whether view ordering is retained (it isn't).
Maciek Sakrejda
Discussion: https://postgr.es/m/CAOtHd0D-OvrUU0C=4hX28p4BaSE1XL78BAQ0VcDaLLt8tdUzsg@mail.gmail.com
Clarify that the results of nextval and setval are not guaranteed
persistent until the calling transaction commits. Some people
seem to have drawn the opposite conclusion from the statement that
these functions are never rolled back, so re-word to avoid saying
it quite that way.
Discussion: https://postgr.es/m/CAKU4AWohO=NfM-4KiZWvdc+z3c1C9FrUBR6xnReFJ6sfy0i=Lw@mail.gmail.com
Documentation and any code paths related to VS are updated to keep the
whole consistent. Similarly to 2017 and 2019, the version of VS and the
version of nmake that we use to determine which code paths to use for
the build are still inconsistent in their own way.
Backpatch down to 10, so as buildfarm members are able to use this new
version of Visual Studio on all the stable branches supported.
Author: Hans Buschmann
Discussion: https://postgr.es/m/1633101364685.39218@nidsa.net
Backpatch-through: 10
This commit adds a set of functions able to look at the contents of
various paths related to replication slots:
- pg_ls_logicalsnapdir, for pg_logical/snapshots/
- pg_ls_logicalmapdir, for pg_logical/mappings/
- pg_ls_replslotdir, for pg_replslot/<slot_name>/
These are intended to be used by monitoring tools. Unlike pg_ls_dir(),
execution permission can be granted to non-superusers. Roles members of
pg_monitor gain have access to those functions.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Justin Pryzby
Discussion: https://postgr.es/m/CALj2ACWsfizZjMN6bzzdxOk1ADQQeSw8HhEjhmVXn_Pu+7VzLw@mail.gmail.com
The "See also" section on the reference page for CREATE PUBLICATION
didn't match the cross references on CREATE SUBSCRIPTION and their
ALTER counterparts. Fixed by adding an xref to the CREATE and ALTER
SUBSCRIPTION pages. Backpatch down to v10 where CREATE PUBLICATION
was introduced.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAHut+PvGWd3-Ktn96c-z6uq-8TGVVP=TPOkEovkEfntoo2mRhw@mail.gmail.com
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The tsvector data type has always forbidden lexemes to be empty.
However, array_to_tsvector() didn't get that memo, and would
allow an empty-string array element to become an empty lexeme.
This could result in dump/restore failures later, not to mention
whatever semantic issues might be behind the original prohibition.
However, other functions that take a plain text input directly as
a lexeme value do not need a similar restriction, because they only
match the string against existing tsvector entries. In particular
it'd be a bad idea to make ts_delete() reject empty strings, since
that is the most convenient way to clean up any bad data that might
have gotten into a tsvector column via this bug.
Reflecting on that, let's also remove the prohibition against NULL
array elements in tsvector_delete_arr and tsvector_setweight_by_filter.
It seems more consistent to ignore them, as an empty-string element
would be ignored.
There's a case for back-patching this, since it's clearly a bug fix.
On balance though, it doesn't seem like something to change in a
minor release.
Jean-Christophe Arnu
Discussion: https://postgr.es/m/CAHZmTm1YVndPgUVRoag2WL0w900XcoiivDDj-gTTYBsG25c65A@mail.gmail.com
pgcrypto had internal implementations of some encryption algorithms,
as an alternative to calling out to OpenSSL. These were rarely used,
since most production installations are built with OpenSSL. Moreover,
maintaining parallel code paths makes the code more complex and
difficult to maintain.
This patch removes these internal implementations. Now, pgcrypto is
only built if OpenSSL support is configured.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/0b42f1df-8cba-6a30-77d7-acc241cc88c1%40enterprisedb.com
pg_receivewal gains a new option, --compression-method=lz4, available
when the code is compiled with --with-lz4. Similarly to gzip, this
gives the possibility to compress archived WAL segments with LZ4. This
option is not compatible with --compress.
The implementation uses LZ4 frames, and is compatible with simple lz4
commands. Like gzip, using --synchronous ensures that any data will be
flushed to disk within the current .partial segment, so as it is
possible to retrieve as much WAL data as possible even from a
non-completed segment (this requires completing the partial file with
zeros up to the WAL segment size supported by the backend after
decompression, but this is the same as gzip).
The calculation of the streaming start LSN is able to transparently find
and check LZ4-compressed segments. Contrary to gzip where the
uncompressed size is directly stored in the object read, the LZ4 chunk
protocol does not store the uncompressed data by default. There is
contentSize that can be used with LZ4 frames by that would not help if
using an archive that includes segments compressed with the defaults of
a "lz4" command, where this is not stored. So, this commit has taken
the most extensible approach by decompressing the already-archived
segment to check its uncompressed size, through a blank output buffer in
chunks of 64kB (no actual performance difference noticed with 8kB, 16kB
or 32kB, and the operation in itself is actually fast).
Tests have been added to verify the creation and correctness of the
generated LZ4 files. The latter is achieved by the use of command
"lz4", if found in the environment.
The tar-based WAL method in walmethods.c, used now only by
pg_basebackup, does not know yet about LZ4. Its code could be extended
for this purpose.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
The option name was incorrect in one of the error messages, and the
short option 'I' was used in the code but we did not intend things to be
this way. While on it, fix the documentation to refer to a "method",
and not a "level.
Oversights in commit d62bcc8, that I have detected after more review of
the LZ4 patch for pg_receivewal.
pg_receivewal includes since cada1af the option --compress, to allow the
compression of WAL segments using gzip, with a value of 0 (the default)
meaning that no compression can be used.
This commit introduces a new option, called --compression-method, able
to use as values "none", the default, and "gzip", to make things more
extensible. The case of --compress=0 becomes fuzzy with this option
layer, so we have made the choice to make pg_receivewal return an error
when using "none" and a non-zero compression level, meaning that the
authorized values of --compress are now [1,9] instead of [0,9]. Not
specifying --compress with "gzip" as compression method makes
pg_receivewal use the default of zlib instead (Z_DEFAULT_COMPRESSION).
The code in charge of finding the streaming start LSN when scanning the
existing archives is refactored and made more extensible. While on it,
rename "compression" to "compression_level" in walmethods.c, to reduce
the confusion with the introduction of the compression method, even if
the tar method used by pg_basebackup does not rely on the compression
method (yet, at least), but just on the compression level (this area
could be improved more, actually).
This is in preparation for an upcoming patch that adds LZ4 support to
pg_receivewal.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar,
Robert Haas
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
Use verbiage like "The name of the table must be distinct from the name
of any other relation (table, sequence, index, view, materialized view,
or foreign table) in the same schema." in the reference pages for all
those object types. The main change here is to mention materialized
views explicitly; although a couple of these pages failed to say
anything at all about name conflicts.
Per suggestion from Daniel Westermann.
Discussion: https://postgr.es/m/ZR0P278MB0920D0946509233459AF0DEFD2889@ZR0P278MB0920.CHEP278.PROD.OUTLOOK.COM
Previously failures of initial connection and logfile open caused pgbench
to proceed the benchmarking, report the incomplete results and exit with
status 2. It didn't make sense to proceed the benchmarking even when
pgbench could not start as prescribed.
This commit improves pgbench so that early errors that occur when
starting benchmark such as those failures should make pgbench exit
immediately with status 1.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870057375ACA8A73099C649F5349@TYCPR01MB5870.jpnprd01.prod.outlook.com
The pgcrypto documentation contained acknowledgments of used external
code, but some of this code has been moved to src/common/, so
mentioning it with pgcrypto no longer makes sense, so remove it.
We had a test showing that a variable isn't referenceable in its
own initialization expression, nor in prior ones in the same block.
It *is* referenceable in later expressions in the same block, but
AFAICS there is no test case exercising that. Add one, and also
add some error cases.
Also, document that this is possible, since the docs failed to
cover the point.
Per question from tomás at tuxteam. I don't feel any need to
back-patch this, but we should ensure we don't break it in future.
Discussion: https://postgr.es/m/20211029121435.GA5414@tuxteam.de
Grant privileges on views pg_backend_memory_contexts and
pg_shmem_allocations to the role pg_read_all_stats. Also grant on the
underlying functions that those views depend on.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/CALj2ACWAZo3Ar_EVsn2Zf9irG+hYK3cmh1KWhZS_Od45nd01RA@mail.gmail.com
A new option "FOR ALL TABLES IN SCHEMA" in Create/Alter Publication allows
one or more schemas to be specified, whose tables are selected by the
publisher for sending the data to the subscriber.
The new syntax allows specifying both the tables and schemas. For example:
CREATE PUBLICATION pub1 FOR TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
OR
ALTER PUBLICATION pub1 ADD TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
A new system table "pg_publication_namespace" has been added, to maintain
the schemas that the user wants to publish through the publication.
Modified the output plugin (pgoutput) to publish the changes if the
relation is part of schema publication.
Updates pg_dump to identify and dump schema publications. Updates the \d
family of commands to display schema publications and \dRp+ variant will
now display associated schemas if any.
Author: Vignesh C, Hou Zhijie, Amit Kapila
Syntax-Suggested-by: Tom Lane, Alvaro Herrera
Reviewed-by: Greg Nancarrow, Masahiko Sawada, Hou Zhijie, Amit Kapila, Haiying Tang, Ajin Cherian, Rahila Syed, Bharath Rupireddy, Mark Dilger
Tested-by: Haiying Tang
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ@mail.gmail.com
Remove superuser check, allowing any user granted permissions on
pg_log_backend_memory_contexts() to log the memory contexts of any
backend.
Note that this could allow a privileged non-superuser to log the
memory contexts of a superuser backend, but as discussed, that does
not seem to be a problem.
Reviewed-by: Nathan Bossart, Bharath Rupireddy, Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/e5cf6684d17c8d1ef4904ae248605ccd6da03e72.camel@j-davis.com
Prior to this patch, when running pg_receivewal, the streaming start
point would be the current location of the archives if anything is
found in the local directory where WAL segments are written, and
pg_receivewal would fall back to the current WAL flush location if there
are no archives, as of the result of an IDENTIFY_SYSTEM command.
If for some reason the WAL files from pg_receivewal were moved, it is
better to try a restart where we left at, which is the replication
slot's restart_lsn instead of skipping right to the current flush
location, to avoid holes in the WAL backed up. This commit changes
pg_receivewal to use the following sequence of methods to determine the
starting streaming LSN:
- Scan the local archives.
- Use the slot's restart_lsn, if supported by the backend and if a slot
is defined.
- Fallback to the current flush LSN as reported by IDENTIFY_SYSTEM.
To keep compatibility with older server versions, we only attempt to use
READ_REPLICATION_SLOT if the backend version is at least 15, and
fallback to the older behavior of streaming from the current flush
LSN if the command is not supported.
Some TAP tests are added to cover this feature.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
The command is supported for physical slots for now, and returns the
type of slot, its restart_lsn and its restart_tli.
This will be useful for an upcoming patch related to pg_receivewal, to
allow the tool to be able to stream from the position of a slot, rather
than the last WAL position flushed by the backend (as reported by
IDENTIFY_SYSTEM) if the archive directory is found as empty, which would
be an advantage in the case of switching to a different archive
locations with the same slot used to avoid holes in WAL segment
archives.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
The documentation was imprecise about the starting LSN used for WAL
streaming if nothing can be found in the local archive directory
defined with the pg_receivewal command, so be more talkative on this
matter.
Extracted from a larger patch by the same author.
Author: Ronan Dunklau, Michael Paquier
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
Backpatch-through: 10
Avoid calling contrib/amcheck functions with relations that are
unsuitable for checking. Specifically, don't attempt verification of
temporary relations, or indexes whose pg_index entry indicates that the
index is invalid, or not ready.
These relations are not supported by any of the contrib/amcheck
functions, for reasons that are pretty fundamental. For example, the
implementation of REINDEX CONCURRENTLY can add its own "transient"
pg_index entries, which has rather unclear implications for the B-Tree
verification functions, at least in the general case -- so they just
treat it as an error. It falls to the amcheck caller (in this case
pg_amcheck) to deal with the situation at a higher level.
pg_amcheck now simply treats these conditions as additional "visibility
concerns" when it queries system catalogs. This is a little arbitrary.
It seems to have the least problems among any of the available
alternatives.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Bug: #17212
Discussion: https://postgr.es/m/17212-34dd4a1d6bba98bf@postgresql.org
Backpatch: 14-, where pg_amcheck was introduced.
This operator wasn't formally documented anywhere. To give it
a natural home, relabel the functions-string-other table as
"Other String Functions and Operators", which is more parallel
to the functions-string-sql table anyway.
While here, add cross-references to the pattern match and text
search sections. It seems moderately likely that people would
come to this section looking for those (but I don't want to
actually list them in these tables).
Discussion: https://postgr.es/m/CADT4RqB13KQHOJqqQ+WXmYtJrukS2UiFdtfTvT-XA3qYLyB6Cw@mail.gmail.com
We currently have buildfarm members testing back to AIX 7.1,
but not before, and older AIX versions are long out of support
from IBM. So say that 7.1 is the oldest supported version.
Discussion: https://postgr.es/m/87y278s6iq.fsf@wibble.ilmari.org
Like BASE_BACKUP, CREATE_REPLICATION_SLOT has historically used a
hard-coded syntax. To improve future extensibility, adopt a flexible
options syntax here, too.
In the new syntax, instead of three mutually exclusive options
EXPORT_SNAPSHOT, USE_SNAPSHOT, and NOEXPORT_SNAPSHOT, there is now a single
SNAPSHOT option with three possible values: 'export', 'use', and 'nothing'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, makes pg_receivewal,
pg_recvlogical, and walreceiver processes use it.
Patch by me, reviewed by Fabien Coelho, Sergei Kornilov, and
Fujii Masao.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Previously, BASE_BACKUP used an entirely hard-coded syntax, but that's
hard to extend. Instead, adopt the same kind of syntax we've used for
SQL commands such as VACUUM, ANALYZE, COPY, and EXPLAIN, where it's
not necessary for all of the option names to be parser keywords.
In the new syntax, most of the options now take an optional Boolean
argument. To match our practice in other in places, the options which
the old syntax called NOWAIT and NOVERIFY_CHECKSUMS options are in the
new syntax called WAIT and VERIFY_CHECKUMS, and the default value is
false. In the new syntax, the FAST option has been replaced by a
CHECKSUM option whose value may be 'fast' or 'spread'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, and makes pg_basebackup prefer
the new syntax when the server is new enough to support it.
Patch by me, reviewed and tested by Fabien Coelho, Sergei Kornilov,
Fujii Masao, and Tushar Ahuja.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
queries.sgml failed to mention the rather important point that
INTERSECT binds more tightly than UNION or EXCEPT. I thought
it could also use more discussion of the role of parentheses
in these constructs.
Per gripe from Christopher Painter-Wakefield.
Discussion: https://postgr.es/m/163338891727.12510.3939775743980651160@wrigleys.postgresql.org
Previously both functions were not described anywhere in the docs.
But since they have been around since 7.0 and mentioned in the description
for system catalog like pg_database, it's reasonable to add short
descriptions for them.
Author: Ian Lawrence Barwick
Reviewed-by: Laurenz Albe, Fujii Masao
Discussion: https://postgr.es/m/CAB8KJ=infievn4q1N4X7Vx8w4_RMPPG0pLvxhSDjy5WQOSHW9g@mail.gmail.com
The old URL was HTTP 404 and the git link didn't build. Also update two
other ICU links. If we ever get a good link we will add it back.
Reported-by: Anton Voloshin
Author: Laurenz Albe
Backpatch-through: 10
gist.sgml and xindex.sgml hadn't been fully updated for the
addition of a sortsupport support function (commit 16fa9b2b3).
xindex.sgml also missed that the compress and decompress support
functions are optional, an apparently far older oversight.
In passing, fix gratuitous inconsistencies in wording and
capitalization.
Noted by E. Rogov. Back-patch to v14; the residual issues
before that aren't significant enough to bother with.
Discussion: https://postgr.es/m/163335322905.12519.5711557029494638051@wrigleys.postgresql.org
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
Commit 9868167500 added pg_stat_replication_slots view to monitor
ReorderBuffer stats but mistakenly added it under
"Dynamic Statistics Views" section in the docs whereas it belongs to
"Collected Statistics Views" section.
Author: Amit Kapila
Reviewed-by: Masahiko Sawada
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1Kb5ur=OC-G4cAsqPOjoVe+S8LNw1WmUY8Owasjk8o5WQ@mail.gmail.com
Sequences were left out of the list of relation kinds that
verify_heapam knew how to check, though it is fairly trivial to allow
them. Doing that, and while at it, updating pg_amcheck to include
sequences in relations matched by table and relation patterns.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/81ad4757-92c1-4aa3-7bee-f609544837e3%40enterprisedb.com
Be a little more vocal about the risks of remote collations not
matching local ones. Actually fixing these risks seems hard,
and I've given up on the idea that it might be back-patchable.
So the best we can do for the back branches is add documentation.
Per discussion of bug #16583 from Jiří Fejfar.
Discussion: https://postgr.es/m/2438715.1632510693@sss.pgh.pa.us
Index vacuums may happen multiple times depending on the number of dead
tuples stored, as of maintenance_work_mem for a manual VACUUM. For
autovacuum, this is controlled by autovacuum_work_mem instead, if set.
The documentation mentioned the former, but not the latter in the
context of autovacuum.
Reported-by: Nikolai Berkoff
Author: Laurenz Albe, Euler Taveira
Discussion: https://postgr.es/m/161545365522.10134.12195402324485546870@wrigleys.postgresql.org
Backpatch-through: 9.6
This runtime-computed GUC shows the number of huge pages required
for the server's main shared memory area, taking advantage of the
work done in 0c39c29 and 0bd305e. This is useful for users to estimate
the amount of huge pages required for a server as it becomes possible to
do an estimation without having to start the server and potentially
allocate a large chunk of shared memory.
The number of huge pages is calculated based on the existing GUC
huge_page_size if set, or by using the system's default by looking at
/proc/meminfo on Linux. There is nothing new here as this commit reuses
the existing calculation methods, and just exposes this information
directly to the user. The routine calculating the huge page size is
refactored to limit the number of files with platform-specific flags.
This new GUC's name was the most popular choice based on the discussion
done. This is only supported on Linux.
I have taken the time to test the change on Linux, Windows and MacOS,
though for the last two ones large pages are not supported. The first
one calculates correctly the number of pages depending on the existing
GUC huge_page_size or the system's default.
Thanks to Andres Freund, Robert Haas, Kyotaro Horiguchi, Tom Lane,
Justin Pryzby (and anybody forgotten here) for the discussion.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
Until now, the -C option of postgres was handled before a small subset
of GUCs computed at runtime are initialized, leading to incorrect
results as GUC machinery would fall back to default values for such
parameters.
For example, data_checksums could report "off" for a cluster as the
control file is not loaded yet. Or wal_segment_size would show a
segment size at 16MB even if initdb --wal-segsize used something else.
Worse, the command would fail to properly report the recently-introduced
shared_memory, that requires to load shared_preload_libraries as these
could ask for a chunk of shared memory.
Support for runtime GUCs comes with a limitation, as the operation is
now allowed on a running server. One notable reason for this is that
_PG_init() functions of loadable libraries are called before all
runtime-computed GUCs are initialized, and this is not guaranteed to be
safe to do on running servers. For the case of shared_memory_size,
where we want to know how much memory would be used without allocating
it, this limitation is fine. Another case where this will help is for
huge pages, with the introduction of a different GUC to evaluate the
amount of huge pages required for a server before starting it, without
having to allocate large chunks of memory.
This feature is controlled with a new GUC flag, and four parameters are
classified as runtime-computed as of this change:
- data_checksums
- shared_memory_size
- data_directory_mode
- wal_segment_size
Some TAP tests are added to provide some coverage here, using
data_checksums in the tests of pg_checksums.
Per discussion with Andres Freund, Justin Pryzby, Magnus Hagander and
more.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
The available refresh options are specified as refresh_options under
REFRESH PUBLICATION, and DROP PUBLICATION itself has an option named
refresh. Clarify what we mean by refresh options to avoid confusion.
Backpatch through v14 where ALTER SUBSCRIPTION ... DROP PUBLICATION
was introduced.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAD21AoCm1wJ3A8Q9EmBjRbShYkJ+o+Oa_z9O0hvwhvhUa2BSyg@mail.gmail.com
Backpatch-through: 14
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
The subscription parameters are rearranged into two groups:
a) those that control what happens during Create Subscription
b) those that control the replication behavior
This makes the documentation of Create Subscription easier to follow.
Author: Peter Smith
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAHut+PtPJDSOxtuMGpO2yDrRPKxcYGL4n7HqJP9HernZE=Cj+g@mail.gmail.com
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
This runtime-computed GUC shows the size of the server's main shared
memory area, taking into account the amount of shared memory allocated
by extensions as this is calculated after processing
shared_preload_libraries.
Author: Nathan Bossart
Discussion: https://postgr.es/m/F2772387-CE0F-46BF-B5F1-CC55516EB885@amazon.com
This commit adds postgres_fdw.application_name GUC which specifies
a value for application_name configuration parameter used
when postgres_fdw establishes a connection to a foreign server.
This GUC setting always overrides application_name option of
the foreign server object. This GUC is useful when we want to
specify our own application_name per remote connection.
Previously application_name of a remote connection could be set
basically only via options of a server object. But which meant that
every session connecting to the same foreign server basically
should use the same application_name. Also if we want to change
the setting, we had to execute "ALTER SERVER ... OPTIONS ..." command.
It was inconvenient.
Author: Hayato Kuroda
Reviewed-by: Masahiro Ikeda, Fujii Masao
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
This commit allows pg_stat_reset_single_table_counters() to reset statistics
for a single relation shared across all databases in the cluster to zero.
Bump catalog version.
Author: B Sadhu Prasad Patro
Reviewed-by: Mahendra Singh Thalor, Himanshu Upadhyaya, Dilip Kumar, Fujii Masao
Discussion: https://postgr.es/m/CAFF0-CGy7EHeF=AqqkGMF85cySPQBgDcvNk73G2O0vL94O5U5A@mail.gmail.com
While populating the pgbench_accounts table, plain COPY was
unconditionally used. By changing it to COPY FREEZE, the time for
VACUUM is significantly reduced, thus the total time of "pgbench -i"
is also reduced. This only happens if pgbench runs against PostgreSQL
14 or later because COPY FREEZE in previous versions of PostgreSQL does
not bring the benefit. Also if partitioning is used, COPY FREEZE
cannot be used. In this case plain COPY will be used too.
Author: Tatsuo Ishii
Discussion: https://postgr.es/m/20210308.143907.2014279678657453983.t-ishii@gmail.com
Reviewed-by: Fabien COELHO, Laurenz Albe, Peter Geoghegan, Dean Rasheed
Commit 6c3ffd6 added a couple new predefined roles but didn't properly
wrap the SQL commands mentioned in the description of those roles with
command tags, so add them now.
Backpatch-through: 14
Reported-by: Michael Banck
Discussion: https://postgr.es/m/606d8b1c.1c69fb81.3df04.1a99@mx.google.com
Since the whole documentation tool chain is now UTF-8 and there is an
increasing number of non-ISO-8859-1 characters in the text, keeping
the Texinfo output in ISO 8859-1 just creates unnecessary
complications. Depending on the platform, there are conversion
failures and thus build failures, or weirdly converted characters. By
changing the output to UTF-8, the whole encoding conversion business
is sidestepped.
The current refresh behavior tries to just refresh added/dropped
publications but that leads to removing wrong tables from subscription. We
can't refresh just the dropped publication because it is quite possible
that some of the tables are removed from publication by that time and now
those will remain as part of the subscription. Also, there is a chance
that the tables that were part of the publication being dropped are also
part of another publication, so we can't remove those.
So, we decided that by default, add/drop commands will also act like
REFRESH PUBLICATION which means they will refresh all the publications. We
can keep the old behavior for "add publication" but it is better to be
consistent with "drop publication".
Author: Hou Zhijie
Reviewed-by: Masahiko Sawada, Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/OS0PR01MB5716935D4C2CC85A6143073F94EF9@OS0PR01MB5716.jpnprd01.prod.outlook.com
Using --quiet in combination with --no-strict-names didn't work as
documented, a warning message was still emitted. Since the --quiet
flag was working in an unconventional way to other utilities, fix
by removing the functionality instead.
Backpatch through 14 where pg_amcheck was introduced.
Bug: 17148
Reported-by: Chen Jiaoqian <chenjq.jy@fujitsu.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/17148-b5087318e2b04fc6@postgresql.org
Backpatch-through: 14
This reverts the following commits:
1b5617eb84 Describe (auto-)analyze behavior for partitioned tables
0e69f705cc Set pg_class.reltuples for partitioned tables
41badeaba8 Document ANALYZE storage parameters for partitioned tables
0827e8af70 autovacuum: handle analyze for partitioned tables
There are efficiency issues in this code when handling databases with
large numbers of partitions, and it doesn't look like there isn't any
trivial way to handle those. There are some other issues as well. It's
now too late in the cycle for nontrivial fixes, so we'll have to let
Postgres 14 users continue to manually deal with ANALYZE their
partitioned tables, and hopefully we can fix the issues for Postgres 15.
I kept [most of] be280cdad2 ("Don't reset relhasindex for partitioned
tables on ANALYZE") because while we added it due to 0827e8af70, it is
a good bugfix in its own right, since it affects manual analyze as well
as autovacuum-induced analyze, and there's no reason to revert it.
I retained the addition of relkind 'p' to tables included by
pg_stat_user_tables, because reverting that would require a catversion
bump.
Also, in pg14 only, I keep a struct member that was added to
PgStat_TabStatEntry to avoid breaking compatibility with existing stat
files.
Backpatch to 14.
Discussion: https://postgr.es/m/20210722205458.f2bug3z6qzxzpx2s@alap3.anarazel.de
The initdb help message for --sync-only was a bit terse, and not
really self-explanatory. Make it clearer that initdb --sync-only
will exit after syncing, and expand the docs with a note on when
the option can be useful. Also align the help output with others
that exit immediately.
Author: Nathan Bossart, Gurjeet Singh
Discussion: https://postgr.es/m/CABwTF4U6hbNNE1bv=LxQdJybmUdZ5NJQ9rKY9tN82NXM8QH+iQ@mail.gmail.com
Background workers without shared memory access have been broken on
EXEC_BACKEND / windows builds since shortly after background workers have been
introduced, without that being reported. Clearly they are not commonly used.
The problem is that bgworker startup requires to be attached to shared memory
in EXEC_BACKEND child processes. StartBackgroundWorker() detaches from shared
memory for unconnected workers, but at that point we already have initialized
subsystems referencing shared memory.
Fixing this problem is not entirely trivial, so removing the option to not be
connected to shared memory seems the best way forward. In most use cases the
advantages of being connected to shared memory far outweigh the disadvantages.
As there have been no reports about this issue so far, we have decided that it
is not worth trying to address the problem in the back branches.
Per discussion with Alvaro Herrera, Robert Haas and Tom Lane.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210802065116.j763tz3vz4egqy3w@alap3.anarazel.de
The check for sslsni only checked for existence of the parameter
but not for the actual value of the param. This meant that the
SNI extension was always turned on. Fix by inspecting the value
of sslsni and only activate the SNI extension iff sslsni has been
enabled. Also update the docs to be more in line with how other
boolean params are documented.
Backpatch to 14 where sslsni was first implemented.
Reviewed-by: Tom Lane
Backpatch-through: 14, where sslni was added
OpenSSL 3 introduced the concept of providers to support modularization,
and moved the outdated ciphers to the new legacy provider. In case it's
not loaded in the users openssl.cnf file there will be a lot of regress
test failures, so add alternative outputs covering those.
Also document the need to load the legacy provider in order to use older
ciphers with OpenSSL-enabled pgcrypto.
This will be backpatched to all supported version once there is sufficient
testing in the buildfarm of OpenSSL 3.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/FEF81714-D479-4512-839B-C769D2605F8A@yesql.se
In ec34040af I added a mention that there was no point in setting
maintenance_work_limit to anything higher than 1GB for vacuum, but that
was incorrect as ginInsertCleanup() also looks at what
maintenance_work_mem is set to during VACUUM and that's not limited to
1GB.
Here I attempt to make it more clear that the limitation is only around
the number of dead tuple identifiers that we can collect during VACUUM.
I've also added a note to autovacuum_work_mem to mention this limitation.
I didn't do that in ec34040af as I'd had some wrong-headed ideas about
just limiting the maximum value for that GUC to 1GB.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGwOAvunp-E-bN_rbAs3hmxMoasm5pzkYDbf36h73s7w@mail.gmail.com
Backpatch-through: 9.6, same as ec34040af
Since commit e462856a7a, pg_upgrade automatically creates a script to
update extensions, so mention that instead of ALTER EXTENSION.
Backpatch-through: 9.6
Copy-and-pasteo in 665c5855e, evidently. The 9.6 docs toolchain
whined about duplicate index entries, though our modern toolchain
doesn't. In any case, these GUCs surely are not about the
default settings of these values.
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
Commit a8fd13cab0 added support for prepared transactions to built-in
logical replication via a new option "two_phase" for a subscription. The
"two_phase" option was not allowed with the existing streaming option.
This commit permits the combination of "streaming" and "two_phase"
subscription options. It extends the pgoutput plugin and the subscriber
side code to add the prepare API for streaming transactions which will
apply the changes accumulated in the spool-file at prepare time.
Author: Peter Smith and Ajin Cherian
Reviewed-by: Vignesh C, Amit Kapila, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
This patch adds new functions regexp_count(), regexp_instr(),
regexp_like(), and regexp_substr(), and extends regexp_replace()
with some new optional arguments. All these functions follow
the definitions used in Oracle, although there are small differences
in the regexp language due to using our own regexp engine -- most
notably, that the default newline-matching behavior is different.
Similar functions appear in DB2 and elsewhere, too. Aside from
easing portability, these functions are easier to use for certain
tasks than our existing regexp_match[es] functions.
Gilles Darold, heavily revised by me
Discussion: https://postgr.es/m/fc160ee0-c843-b024-29bb-97b5da61971f@darold.net
Where appropriate, annotate message field data types with the backend
code's name for the data type, eg XLogRecPtr or TimestampTz. Previously
we just said "Int64" which didn't provide as much info.
Also clarify references to object OIDs, and make use of the existing
convention to denote the value of a field that must have a fixed value.
Vignesh C, reviewed by Peter Smith and Euler Taveira.
Discussion: https://postgr.es/m/CALDaNm0+fatx57KFcBopUZWQpH_tz3WKKfm-_eiTwcXui5BnhQ@mail.gmail.com
For no visible reason (other than historical accident no doubt),
regexp_replace() was out of order. Re-order to match the way
that these functions are listed in 9.4. (That means substring()
remains first, because it's SQL-standard and the rest aren't.)
I've not touched the text other than to move it. This is just
to reduce confusion in the diffs for upcoming additions.
It wasn't all that clear which lock levels, if any, would be held on the
DEFAULT partition during an ATTACH PARTITION operation.
Also, clarify which locks will be taken if the DEFAULT partition or the
table being attached are themselves partitioned tables.
Here I'm only backpatching to v12 as before then we obtained an ACCESS
EXCLUSIVE lock on the partitioned table. It seems much less relevant to
mention which locks are taken on other tables when the partitioned table
itself is locked with an ACCESS EXCLUSIVE lock.
Author: Matthias van de Meent, David Rowley
Discussion: https://postgr.es/m/CAEze2WiTB6iwrV8W_J=fnrnZ7fowW3qu-8iQ8zCHP3FiQ6+o-A@mail.gmail.com
Backpatch-through: 12
The logic used to support a change of access method for a table is
similar to changes for tablespace or relation persistence, requiring a
table rewrite with an exclusive lock of the relation changed. Table
rewrites done in ALTER TABLE already go through the table AM layer when
scanning tuples from the old relation and inserting them into the new
one, making this implementation straight-forward.
Note that partitioned tables are not supported as these have no access
methods defined.
Author: Justin Pryzby, Jeff Davis
Reviewed-by: Michael Paquier, Vignesh C
Discussion: https://postgr.es/m/20210228222530.GD20769@telsasoft.com
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
Add pg_resetxlog -u option to set the oldest xid in pg_control.
Previously -x set this value be -2 billion less than the -x value.
However, this causes the server to immediately scan all relation's
relfrozenxid so it can advance pg_control's oldest xid to be inside the
autovacuum_freeze_max_age range, which is inefficient and might disrupt
diagnostic recovery. pg_upgrade will use this option to better create
the new cluster to match the old cluster.
Reported-by: Jason Harvey, Floris Van Nee
Discussion: https://postgr.es/m/20190615183759.GB239428@rfd.leadboat.com, 87da83168c644fd9aae38f546cc70295@opammb0562.comp.optiver.com
Author: Bertrand Drouvot
Backpatch-through: 9.6
Formerly, when specifying NUMERIC(precision, scale), the scale had to
be in the range [0, precision], which was per SQL spec. This commit
extends the range of allowed scales to [-1000, 1000], independent of
the precision (whose valid range remains [1, 1000]).
A negative scale implies rounding before the decimal point. For
example, a column might be declared with a scale of -3 to round values
to the nearest thousand. Note that the display scale remains
non-negative, so in this case the display scale will be zero, and all
digits before the decimal point will be displayed.
A scale greater than the precision supports fractional values with
zeros immediately after the decimal point.
Take the opportunity to tidy up the code that packs, unpacks and
validates the contents of a typmod integer, encapsulating it in a
small set of new inline functions.
Bump the catversion because the allowed contents of atttypmod have
changed for numeric columns. This isn't a change that requires a
re-initdb, but negative scale values in the typmod would confuse old
backends.
Dean Rasheed, with additional improvements by Tom Lane. Reviewed by
Tom Lane.
Discussion: https://postgr.es/m/CAEZATCWdNLgpKihmURF8nfofP0RFtAKJ7ktY6GcZOPnMfUoRqA@mail.gmail.com
Renaming triggers on partitioned tables had two problems: first,
it did not recurse to renaming the triggers on the partitions; and
second, it failed to prohibit renaming clone triggers. Having triggers
with different names in partitions is pointless, and furthermore pg_dump
would not preserve names for partitions anyway.
Not backpatched -- making the ALTER TRIGGER throw an error in stable
versions might cause problems for existing scripts.
Co-authored-by: Arne Roland <A.Roland@index.de>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/d0fd7040c2fb4de1a111b9d9ccc456b8@index.de
Dept. of second thoughts: the new verbiage added in commit aaec237b1a
is targeted at the wrong audience. Remove the bits about git and talk
about how to get tarballs only. People looking for the git repo can
look in the appendix. That'll need to be expanded, but this commit
doesn't do that.
In passing, fix a couple of typos that snuck in with the previous
commit.
Discussion: https://postgr.es/m/713760.1626891263@sss.pgh.pa.us
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange), which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu, Tom Lane
Reviewed-by: Alvaro Herrera
We had documentation of default_transaction_isolation et al,
but for some reason not of transaction_isolation et al.
AFAICS this is just an ancient oversight, so repair.
Per bug #17077 from Yanliang Lei.
Discussion: https://postgr.es/m/17077-ade8e166a01e1374@postgresql.org
Ensure to properly mark up function parameters in text with <parameter>,
avoid using <acronym> for terms which aren't acronyms and properly place
the ", and" in a value list. The acronym removal is a follow-up to commit
fb72a7b8c3 which removed it for minmax-multi. In passing, also fix an
incorrectly cased word.
Author: Ekaterina Kiryanova <e.kiryanova@postgrespro.ru>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/c050ecbc-80b2-b360-3c1d-9fe6a6a11bb5@postgrespro.ru
Backpatch-through: v14
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
Allow a pager to be used by the \watch command. This works but isn't
very useful with traditional pagers like "less", so use a different
environment variable. The popular open source tool "pspg" (also by
Pavel) knows how to display the output if you set PSQL_WATCH_PAGER="pspg
--stream".
To make \watch react quickly when the user quits the pager or presses
^C, and also to increase the accuracy of its timing and decrease the
rate of useless context switches, change the main loop of the \watch
command to use sigwait() rather than a sleeping/polling loop, on Unix.
Supported on Unix only for now (like pspg).
Author: Pavel Stehule <pavel.stehule@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAFj8pRBfzUUPz-3gN5oAzto9SDuRSq-TQPfXU_P6h0L7hO%2BEhg%40mail.gmail.com
When sending queries in pipeline mode, we were careless about leaving
the connection in the right state so that PQgetResult would behave
correctly; trying to read further results after sending a query after
having read a result with an error would sometimes hang. Fix by
ensuring internal libpq state is changed properly. All the state
changes were being done by the callers of pqAppendCmdQueueEntry(); it
would have become too repetitious to have this logic in each of them, so
instead put it all in that function and relieve callers of the
responsibility.
Add a test to verify this case. Without the code fix, this new test
hangs sometimes.
Also, document that PQisBusy() would return false when no queries are
pending result. This is not intuitively obvious, and NULL would be
obtained by calling PQgetResult() at that point, which is confusing.
Wording by Boris Kolpackov.
In passing, fix bogus use of "false" to mean "0", per Ranier Vilela.
Backpatch to 14.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Discussion: https://postgr.es/m/boris.20210624103805@codesynthesis.com
This commit fixes wrong wording like "a fewer kinds"
in the description about track_planning option.
Back-patch to v13 where pg_stat_statements.track_planning was added.
Author: Justin Pryzby
Reviewed-by: Julien Rouhaud, Fujii Masao
Discussion: https://postgr.es/m/20210418233615.GB7256@telsasoft.com
Previously the values such as '100$%$#$#', '9,223,372,' were accepted and
treated as valid integers for postgres_fdw options batch_size and fetch_size.
Whereas this is not the case with fdw_startup_cost and fdw_tuple_cost options
for which an error is thrown. This was because endptr was not used
while converting strings to integers using strtol.
This commit changes the logic so that it uses parse_int function
instead of strtol as it serves the purpose by returning false in case
if it is unable to convert the string to integer. Note that
this function also rounds off the values such as '100.456' to 100 and
'100.567' or '100.678' to 101.
While on this, use parse_real for fdw_startup_cost and fdw_tuple_cost options.
Since parse_int and parse_real are being used for reloptions and GUCs,
it is more appropriate to use in postgres_fdw rather than using strtol
and strtod directly.
Back-patch to v14.
Author: Bharath Rupireddy
Reviewed-by: Ashutosh Bapat, Tom Lane, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVMO6wY5Pc4oe1OCgUOAtdjHuFsBDw8R5uoYR86eWFQDA@mail.gmail.com
Previously, all CustomScan providers had to support projections,
but there may be cases where this is inconvenient. Add a flag
bit to say if it's supported.
Important item for the release notes: this is non-backwards-compatible
since the default is now to assume that CustomScan providers can't
project, instead of assuming that they can. It's fail-soft, but could
result in visible performance penalties due to adding unnecessary
Result nodes.
Sven Klemm, reviewed by Aleksander Alekseev; some cosmetic fiddling
by me.
Discussion: https://postgr.es/m/CAMCrgp1kyakOz6c8aKhNDJXjhQ1dEjEnp+6KNT3KxPrjNtsrDg@mail.gmail.com
This has the advantage to make a process more responsive when the
postmaster dies, even if the wait time was rather limited as there was
only a 50ms timeout here. Another advantage of this change is for
monitoring, as we gain a new wait event for the end-of-vacuum
truncation.
Author: Bharath Rupireddy
Reviewed-by: Aleksander Alekseev, Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACU4AdPCq6NLfcA-ZGwX7pPCK5FgEj-CAU0xCKzkASSy_A@mail.gmail.com
These are the same as world and install-world respectively, but without
building or installing the documentation. There are many reasons for
wanting to be able to do this, including speed, lack of documentation
building tools, and wanting to build other formats of the documentation.
Plans for simplifying the buildfarm client code include using these
targets.
Backpatch to all live branches.
Discussion: https://postgr.es/m/6a421136-d462-b043-a8eb-e75b2861f3df@dunslane.net
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
Previously the descriptions of tup_returned and tup_fetched columns
in pg_stat_database view were confusing. This commit improves them
so that they represent the following formulas of those columns
more accurately.
* pg_stat_database.tup_returned
= sum(pg_stat_all_tables.seq_tup_read)
+ sum(pg_stat_all_indexes.idx_tup_read)
* pg_stat_database.tup_fetched
= sum(pg_stat_all_tables.idx_tup_fetch)
In these formulas, note that the counters for some system catalogs
like pg_database shared across all databases of a cluster are excluded
from the calculations of sum.
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/9eeeccdb-5dd7-90f9-2807-a4b5d2b76ca3@oss.nttdata.com
Extend the replication command CREATE_REPLICATION_SLOT to support the
TWO_PHASE option. This will allow decoding commands like PREPARE
TRANSACTION, COMMIT PREPARED and ROLLBACK PREPARED for slots created with
this option. The decoding of the transaction happens at prepare command.
This patch also adds support of two-phase in pg_recvlogical via a new
option --two-phase.
This option will also be used by future patches that allow streaming of
transactions at prepare time for built-in logical replication. With this,
the out-of-core logical replication solutions can enable replication of
two-phase transactions via replication protocol.
Author: Ajin Cherian
Reviewed-By: Jeff Davis, Vignesh C, Amit Kapila
Discussion:
https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ruhttps://postgr.es/m/64b9f783c6e125f18f88fbc0c0234e34e71d8639.camel@j-davis.com
This commit prevents pg_checksums to do a rewrite of a block if it has
no need to, in the case where the computed checksum matches with what's
already stored in the block read. This is helpful to accelerate
successive runs of the tool when the previous ones got interrupted, for
example.
The number of blocks and files written is tracked and reported by the
tool once finished. Note that the final flush of the data folder
happens even if no blocks are written, as it could be possible that a
previous interrupted run got stopped while doing a flush.
Author: Greg Sabino Mullane
Reviewed-by: Paquier Michael, Julien Rouhaud
Discussion: https://postgr.es/m/CAKAnmmL+k6goxmVzQJB+0bAR0PN1sgo6GDUXJhyhUmVMze1QAw@mail.gmail.com
This new libpq function allows the application to send an 'H' message,
which instructs the server to flush its outgoing buffer.
This hasn't been needed so far because the Sync message already requests
a buffer; and I failed to realize that this was needed in pipeline mode
because PQpipelineSync also causes the buffer to be flushed. However,
sometimes it is useful to request a flush without establishing a
synchronization point.
Backpatch to 14, where pipeline mode was introduced in libpq.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106252350.t76x73nt643j@alvherre.pgsql
The logic is implemented so as there can be a choice in the compression
used when building a WAL record, and an extra per-record bit is used to
track down if a block is compressed with PGLZ, LZ4 or nothing.
wal_compression, the existing parameter, is changed to an enum with
support for the following backward-compatible values:
- "off", the default, to not use compression.
- "pglz" or "on", to compress FPWs with PGLZ.
- "lz4", the new mode, to compress FPWs with LZ4.
Benchmarking has showed that LZ4 outclasses easily PGLZ. ZSTD would be
also an interesting choice, but going just with LZ4 for now makes the
patch minimalistic as toast compression is already able to use LZ4, so
there is no need to worry about any build-related needs for this
implementation.
Author: Andrey Borodin, Justin Pryzby
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/3037310D-ECB7-4BF1-AF20-01C10BB33A33@yandex-team.ru
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
This adds MITM and SNI as acronyms, as the documentation already had
them marked up with <acronym>.
While on it, make sure to spell man-in-the-middle with dashes
consistently, and add acronyms for those new terms where appropriate.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CE12DD5C-4BB3-4166-BC9A-39779568734C@yesql.se
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
The syntax summaries for CREATE FUNCTION and allied commands
made it look like LEAKPROOF is an alternative to
IMMUTABLE/STABLE/VOLATILE, when of course it is an orthogonal
option. Improve that.
Per gripe from aazamrafeeque0. Thanks to David Johnston for
suggestions.
Discussion: https://postgr.es/m/162444349581.694.5818572718530259025@wrigleys.postgresql.org
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
In a synchronous logical setup, locking [user] catalog tables can cause
deadlock. This is because logical decoding of transactions can lock
catalog tables to access them so exclusively locking those in transactions
can lead to deadlock. To avoid this users must refrain from having
exclusive locks on catalog tables.
Author: Takamichi Osumi
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky%40alap3.anarazel.de
It has been spotted that multiranges lack of ability to decompose them into
individual ranges. Subscription and proper expanded object representation
require substantial work, and it's too late for v14. This commit
provides the implementation of unnest(multirange) and cast multirange as
an array of ranges, which is quite trivial.
unnest(multirange) is defined as a polymorphic procedure. The catalog
description of the cast underlying procedure is duplicated for each multirange
type because we don't have anyrangearray polymorphic type to use here.
Catversion is bumped.
Reported-by: Jonathan S. Katz
Discussion: https://postgr.es/m/flat/60258efe-bd7e-4886-82e1-196e0cac5433%40postgresql.org
Author: Alexander Korotkov
Reviewed-by: Justin Pryzby, Jonathan S. Katz, Zhihong Yu
It was unable to wait on a backend that had already left the procarray.
Users tolerant of that limitation can poll pg_stat_activity. Other
users can employ the "timeout" argument of pg_terminate_backend().
Reviewed by Bharath Rupireddy.
Discussion: https://postgr.es/m/20210605013236.GA208701@rfd.leadboat.com
Revert the pg_description entry to its v13 form, since those messages
usually remain shorter and don't discuss individual parameters. No
catversion bump, since pg_description content does not impair backend
compatibility or application compatibility.
Justin Pryzby
Discussion: https://postgr.es/m/20210612182743.GY16435@telsasoft.com
The extra checks added by the recompression of toast data introduced in
bbe0a81 is proving to have a performance impact on VACUUM or CLUSTER
even if no recompression is done. This is more noticeable with more
toastable columns that contain non-NULL values.
Improvements could be done to make those extra checks less expensive,
but that's not material for 14 at this stage, and we are not sure either
if the code path of VACUUM FULL/CLUSTER is adapted for this job.
Per discussion with several people, including Andres Freund, Robert
Haas, Álvaro Herrera, Tom Lane and myself.
Discussion: https://postgr.es/m/20210527003144.xxqppojoiwurc2iz@alap3.anarazel.de
We have a dozen PQset*() functions. PQresultSetInstanceData() and this
were the libpq setter functions having a different word order. Adopt
the majority word order.
Reviewed by Alvaro Herrera and Robert Haas, though this choice of name
was not unanimous.
Discussion: https://postgr.es/m/20210605060555.GA216695@rfd.leadboat.com
We've accumulated quite a mix of instances of "an SQL" and "a SQL" in the
documents. It would be good to be a bit more consistent with these.
The most recent version of the SQL standard I looked at seems to prefer
"an SQL". That seems like a good lead to follow, so here we change all
instances of "a SQL" to become "an SQL". Most instances correctly use
"an SQL" already, so it also makes sense to use the dominant variation in
order to minimise churn.
Additionally, there were some other abbreviations that needed to be
adjusted. FSM, SSPI, SRF and a few others. Also fix some pronounceable,
abbreviations to use "a" instead of "an". For example, "a SASL" instead
of "an SASL".
Here I've only adjusted the documents and error messages. Many others
still exist in source code comments. Translator hint comments seem to be
the biggest culprit. It currently does not seem worth the churn to change
these.
Discussion: https://postgr.es/m/CAApHDvpML27UqFXnrYO1MJddsKVMQoiZisPvsAGhKE_tsKXquw%40mail.gmail.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
PersistHoldablePortal has long assumed that it should store the
entire output of the query-to-be-persisted, which requires rewinding
and re-reading the output. This is problematic if the query is not
stable: we might get different row contents, or even a different
number of rows, which'd confuse the cursor state mightily.
In the case where the cursor is NO SCROLL, this is very easy to
solve: just store the remaining query output, without any rewinding,
and tweak the portal's cursor state to match. Aside from removing
the semantic problem, this could be significantly more efficient
than storing the whole output.
If the cursor is scrollable, there's not much we can do, but it
was already the case that scrolling a volatile query's result was
pretty unsafe. We can just document more clearly that getting
correct results from that is not guaranteed.
There are already prohibitions in place on using SCROLL with
FOR UPDATE/SHARE, which is one way for a SELECT query to have
non-stable results. We could imagine prohibiting SCROLL when
the query contains volatile functions, but that would be
expensive to enforce. Moreover, it could break applications
that work just fine, if they have functions that are in fact
stable but the user neglected to mark them so. So settle for
documenting the hazard.
While this problem has existed in some guise for a long time,
it got a lot worse in v11, which introduced the possibility
of persisting plpgsql cursors (perhaps implicit ones) even
when they violate the rules for what can be marked WITH HOLD.
Hence, I've chosen to back-patch to v11 but not further.
Per bug #17050 from Алексей Булгаков.
Discussion: https://postgr.es/m/17050-f77aa827dc85247c@postgresql.org
The FE/BE protocol identifies parameters with an Int16 index, which
limits the maximum number of parameters per query to 65535. With
batching added to postges_fdw this limit is much easier to hit, as
the whole batch is essentially a single query, making this error much
easier to hit.
The failures are a bit unpredictable, because it also depends on the
number of columns in the query. So instead of just failing, this patch
tweaks the batch_size to not exceed the maximum number of parameters.
Reported-by: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/OS0PR01MB571603973C0AC2874AD6BF2594299%40OS0PR01MB5716.jpnprd01.prod.outlook.com
This was missing in the section dedicated to the supported environment
variables of libpq. Oversight in f5465fa.
Reviewed-by: Daniel Gustafsson, Kyotaro Horiguchi
Discussion: https://postgr.es/m/YLhI0mLoRkY3u4Wj@paquier.xyz
The previous arrangement was just one big list, and the internal order
was not all consistent either. Now arrange the options by group and
sort them, the way it's already done in the --help output and one
other reference pages. Also fix some ordering in the --help output.
Clarify libpq.sgml's description of service file locations and
semantics. Avoid use of backtick'ed pg_config calls to describe
paths; that doesn't work on Windows, and even on Unix it's an
idiom that not all readers may be instantly familiar with.
Don't overspecify the locations of include files, instead writing
only as much as you'd use in #include directives. The previous text
in these places was incorrect for some installations, depending on
where "postgresql" is in the install path.
Our convention for referencing the user's home directory seems
to be "~", so change the one place that spelled it "$HOME".
install-windows.sgml follows the platform convention of spelling
file paths with "\", so change the one place that used "/".
Haiying Tang and Tom Lane
Discussion: https://postgr.es/m/162149020918.26174.7150424047314144297@wrigleys.postgresql.org
Commit ab596105b increased FirstBootstrapObjectId from 12000 to 13000,
but we've had some push-back about that. It's worrisome to reduce the
daylight between there and FirstNormalObjectId, because the number of
OIDs consumed during initdb for collation objects is hard to predict.
We can improve the situation by abandoning the assumption that these
OIDs must be globally unique. It should be sufficient for them to be
unique per-catalog. (Any code that's unhappy about that is broken
anyway, since no more than per-catalog uniqueness can be guaranteed
once the OID counter wraps around.) With that change, the largest OID
assigned during genbki.pl (starting from a base of 10000) is a bit
under 11000. This allows reverting FirstBootstrapObjectId to 12000
with reasonable confidence that that will be sufficient for many years
to come.
We are not, at this time, abandoning the expectation that
hand-assigned OIDs (below 10000) are globally unique. Someday that'll
likely be necessary, but the need seems years away still.
This is late for v14, but it seems worth doing it now so that
downstream software doesn't have to deal with the consequences of
a change in FirstBootstrapObjectId. In any case, we already
bought into forcing an initdb for beta2, so another catversion
bump won't hurt.
Discussion: https://postgr.es/m/1665197.1622065382@sss.pgh.pa.us
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
The following parameters have been imprecise, or incorrect, about their
description (PGC_POSTMASTER or PGC_SIGHUP):
- autovacuum_work_mem (docs, as of 9.6~)
- huge_page_size (docs, as of 14~)
- max_logical_replication_workers (docs, as of 10~)
- max_sync_workers_per_subscription (docs, as of 10~)
- min_dynamic_shared_memory (docs, as of 14~)
- recovery_init_sync_method (postgresql.conf.sample, as of 14~)
- remove_temp_files_after_crash (docs, as of 14~)
- restart_after_crash (docs, as of 9.6~)
- ssl_min_protocol_version (docs, as of 12~)
- ssl_max_protocol_version (docs, as of 12~)
This commit adjusts the description of all these parameters to be more
consistent with the practice used for the others.
Revewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YK2ltuLpe+FbRXzA@paquier.xyz
Backpatch-through: 9.6
The error messages, docs, and one of the options were using
'parallel degree' to indicate parallelism used by vacuum command. We
normally use 'parallel workers' at other places so change it for parallel
vacuum accordingly.
Author: Bharath Rupireddy
Reviewed-by: Dilip Kumar, Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CALj2ACWz=PYrrFXVsEKb9J1aiX4raA+UBe02hdRp_zqDkrWUiw@mail.gmail.com
Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
COMMIT/ROLLBACK necessarily destroys all snapshots within the session.
The original implementation of intra-procedure transactions just
cavalierly did that, ignoring the fact that this left us executing in
a rather different environment than normal. In particular, it turns
out that handling of toasted datums depends rather critically on there
being an outer ActiveSnapshot: otherwise, when SPI or the core
executor pop whatever snapshot they used and return, it's unsafe to
dereference any toasted datums that may appear in the query result.
It's possible to demonstrate "no known snapshots" and "missing chunk
number N for toast value" errors as a result of this oversight.
Historically this outer snapshot has been held by the Portal code,
and that seems like a good plan to preserve. So add infrastructure
to pquery.c to allow re-establishing the Portal-owned snapshot if it's
not there anymore, and add enough bookkeeping support that we can tell
whether it is or not.
We can't, however, just re-establish the Portal snapshot as part of
COMMIT/ROLLBACK. As in normal transaction start, acquiring the first
snapshot should wait until after SET and LOCK commands. Hence, teach
spi.c about doing this at the right time. (Note that this patch
doesn't fix the problem for any PLs that try to run intra-procedure
transactions without using SPI to execute SQL commands.)
This makes SPI's no_snapshots parameter rather a misnomer, so in HEAD,
rename that to allow_nonatomic.
replication/logical/worker.c also needs some fixes, because it wasn't
careful to hold a snapshot open around AFTER trigger execution.
That code doesn't use a Portal, which I suspect someday we're gonna
have to fix. But for now, just rearrange the order of operations.
This includes back-patching the recent addition of finish_estate()
to centralize the cleanup logic there.
This also back-patches commit 2ecfeda3e into v13, to improve the
test coverage for worker.c (it was that test that exposed that
worker.c's snapshot management is wrong).
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
This is an oversight from bbe0a81d, where the equivalent option exists
in pg_dump. This is useful to be able to reset the compression methods
cluster-wide when restoring the data based on default_toast_compression.
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/YKHC+qCJvzCRVCpY@paquier.xyz
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab4), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done. At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.
To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step. Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains. Therefore, allow
up to 10 cycles without additional savings before throwing an
error. (Perhaps this number will need adjustment, but it seems
quite generous right now.)
As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes. We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things. (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)
Per report from Dilip Kumar.
Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com
Make sample like_regex match string values of the root object instead of the
whole document. The corrected example seems to represent a more relevant
use case.
Backpatch to 12, when jsonpath was introduced.
Discussion: https://postgr.es/m/13440f8b-4c1f-5875-c8e3-f3f65606af2f%40xs4all.nl
Author: Erik Rijkers
Reviewed-by: Michael Paquier, Alexander Korotkov
Backpatch-through: 12
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
Since its introduction in bbe0a81, compression of table data supports
LZ4, but nothing had been done within the MSVC scripts to allow users to
build the code with this library.
This commit closes the gap by extending the MSVC scripts to be able to
build optionally with LZ4. Getting libraries that can be used for
compilation and execution is possible as LZ4 can be compiled down to
MSVC 2010 using its source tarball. MinGW may require extra efforts to
be able to work, and I have been able to test this only with MSVC, still
this is better than nothing to give users a way to test the feature on
Windows.
Author: Dilip Kumar
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/YJPdNeF68XpwDDki@paquier.xyz
"make dist", in charge of creating a distribution tarball, failed when
attempting to generate ./INSTALL as a new reference added to
guc-default-toast-compression on the documentation for the installation
details was not getting translated properly to plain text. Like all the
other link references on this page, this adds a new entry to
standalone-profile.xsl to allow the generation of ./INSTALL to finish
properly.
Oversight in 02a93e7, per buildfarm member guaibasaurus.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
The upstream project is officially named "LZ4", and the documentation
was confused with the option value that can be used with DDLs supporting
this option, and the project name.
Documentation related to the configure option --with-lz4 was missing, so
add something for that.
Author: Dilip Kumar, Michael Paquier
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YJaOZQDXBVySq+Cc@paquier.xyz
The docs mentioned expression indexes as a way to improve selectivity
estimates for functions, but we have a second option to improve that by
creating extended statistics. So mention that too.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20210505210947.GA27406%40telsasoft.com
The per-index collation version tracking feature was reverted, but we
still have the ability to ask Windows (352f6f2d) and FreeBSD
(ca051d8b) for collation versions to store in pg_collation.collversion.
So, from the reverted patch, take a few words of documentation about
libc on all three supported OSes to replace the pre-existing note that
mentioned only glibc.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
The grammar changes in commit bbe0a81db6
allow SET COMPRESSION to be used with ALTER MATERIALIZED VIEW as
well as with ALTER TABLE, so update those docs to say that it works.
Also, update the documentation for the pg_column_compression()
to explain that it will return NULL when there's no relevant value.
Patch by me, per concerns from Michael Paquier.
Discussion: http://postgr.es/m/CA+Tgmob9h5u4iNL9KM0drZgkY-JL4oCVW0dWrMqtLPQ1zHkquA@mail.gmail.com
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Previously, a lot of information about type regclass existed only
in the discussion of the sequence functions. Maybe that made sense
in the beginning, because I think originally those were the only
functions taking regclass. But it doesn't make sense anymore.
Move that material to the "Object Identifier Types" section in
datatype.sgml, generalize it to talk about the other reg* types
as well, and add more examples.
Per bug #16991 from Federico Caselli.
Discussion: https://postgr.es/m/16991-bcaeaafa17e0a723@postgresql.org
Before now, looking up "multirange" in the index only led to the
multirange() function. To make this more useful, also add an entry
pointing to the range types section.
Mention specifically that you can't call aggregates, window functions,
or procedures this way (the inability to call SRFs was already
mentioned).
Also, the claim that PQfn doesn't support NULL arguments or results
has been a lie since we invented protocol 3.0. Not sure why this
text was never updated for that, but do it now.
Discussion: https://postgr.es/m/2039442.1615317309@sss.pgh.pa.us
Makes partition descriptor acquisition faster during the transient
period in which a partition is in the process of being detached.
This also adds the restriction that only one partition can be in
pending-detach state for a partitioned table.
While at it, return find_inheritance_children() API to what it was
before 71f4c8c6f7, and create a separate
find_inheritance_children_extended() that returns detailed info about
detached partitions.
(This incidentally fixes a bug in 8aba932251 whereby a memory context
holding a transient partdesc is reparented to a NULL PortalContext,
leading to permanent leak of that memory. The fix is to no longer rely
on reparenting contexts to PortalContext. Reported by Amit Langote.)
Per gripe from Amit Langote
Discussion: https://postgr.es/m/CA+HiwqFgpP1LxJZOBYGt9rpvTjXXkg5qG2+Xch2Z1Q7KrqZR1A@mail.gmail.com
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
For some reason, the "julian" option for extract()/date_part() has
never gotten listed in the manual. Also, while Appendix B mentioned
in passing that we don't conform to the usual astronomical definition
that a Julian date starts at noon UTC, it was kind of vague about what
we do instead. Clarify that, and add an example showing how to get
the astronomical definition if you want it.
It's been like this for ages, so back-patch to all supported branches.
Discussion: https://postgr.es/m/1197050.1619123213@sss.pgh.pa.us
This will install amcheck in the database if not present. The default
schema is for the extension is pg_catalog, but this can be overridden by
providing a value for the option.
Mark Dilger, slightly editorialized by me.
(rather divergent)
Discussion: https://postgr.es/m/bdc0f7c2-09e3-ee57-8471-569dfb509234@dunslane.net
Previously it was documented that if using "-X none" option there was
no guarantee that all required WAL files were archived at the end of
pg_basebackup when taking a backup from the standby. But this limitation
was removed by commit 52f8a59dd9. Now, even when taking a backup
from the standby, pg_basebackup can wait for all required WAL files
to be archived. Therefore this commit removes such obsolete
description from the docs.
Also this commit adds new description about the limitation when
taking a backup from the standby, into the docs. The limitation is that
pg_basebackup cannot force the standbfy to switch to a new WAL file
at the end of backup, which may cause pg_basebackup to wait a long
time for the last required WAL file to be switched and archived,
especially when write activity on the primary is low.
Back-patch to v10 where the issue was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/20210420.133235.1342729068750553399.horikyota.ntt@gmail.com
parallel_leader_participation got introduced in e5253fd, where it was
listed under RESOURCES_ASYNCHRONOUS in guc.c, but the documentation
did not reflect that and listed it with the other planner-related
options. This commit fixes this inconsistency as the parameter is
intended to be an asynchronous one.
While on it, reorganize a bit the section dedicated to asynchronous
parameters, backend_flush_after being moved first to do better in terms
of alphabetical order of the options listed.
Reported-by: Yanliang Lei
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/16972-42d4b0c15aa1d5f5@postgresql.org
Not enabling compute_query_id would disable pg_stat_statements even if
the module is listed in shared_preload_libraries, so add it to the
minimum configuration set as listed in its documentation.
Author: Greg Nancarrow
Reviewed-by: Julien Rouhaud, Bharath Rupireddy
Discussion: https://postgr.es/m/CAJcOf-fXyb2QiDbwftD813UF70w-+BsK-03bFp1GrijXU9GQYQ@mail.gmail.com
log_statement is issued before query_id can be computed, so properly
clear the value, and document the interaction.
Reported-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/YHPkU8hFi4no4NSw@paquier.xyz
Author: Julien Rouhaud
Previously, it was pg_stat_activity.queryid to match the
pg_stat_statements queryid column. This is an adjustment to patch
4f0b0966c8. This also adjusts some of the internal function calls to
match. Catversion bumped.
Reported-by: Álvaro Herrera, Julien Rouhaud
Discussion: https://postgr.es/m/20210408032704.GA7498@alvherre.pgsql
In the new test after resetting the stats, we were not waiting for the
stats message to be delivered. Also, we need to decode the results for
the new test, otherwise, it will show the old stats.
In passing,
a. Change docs added by commit f5fc2f5b23 as per suggestion by
Justin Pryzby.
b. Bump the PGSTAT_FILE_FORMAT_ID as commit f5fc2f5b23 changes the file
format of stats.
Reported-by: Tom Lane based on buildfarm reports
Author: Vignesh C, Justin Pryzby
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Commit e717a9a18 changed the longstanding rule that prosrc is NOT NULL
because when a SQL-language function is written in SQL-standard style,
we don't currently have anything useful to put there. This seems a poor
decision though, as it could easily have negative impacts on external
PLs (opening them to crashes they didn't use to have, for instance).
SQL-function-related code can just as easily test "is prosqlbody not
null" as "is prosrc null", so there's no real gain there either.
Hence, revert the NOT NULL marking removal and adjust related logic.
For now, we just put an empty string into prosrc for SQL-standard
functions. Maybe we'll have a better idea later, although the
history of things like pg_attrdef.adsrc suggests that it's not
easy to maintain a string equivalent of a node tree.
This also adds an assertion that queryDesc->sourceText != NULL
to standard_ExecutorStart. We'd been silently relying on that
for awhile, so let's make it less silent.
Also fix some overlooked documentation and test cases.
Discussion: https://postgr.es/m/2197698.1617984583@sss.pgh.pa.us
e4c7619 has added a space to the example used for HISTFILE in the docs
of psql before the variable DBNAME, as a workaround because variables
were not parsed the same way back then. This behavior has changed in
9.2, causing the example in the psql docs to result in the same history
file created with or without a space added before the DBNAME variable.
Let's just remove this space in the example, to reduce any confusion, as
the point of it is to prove that a per-database history file is easy to
set up, and that's easier to read this way.
Per discussion with Tom Lane.
Reported-by: Ludovic Kuty
Discussion: https://postgr.es/m/161830067409.691.16198363670687811485@wrigleys.postgresql.org
6568cef, that introduced the option, had an inconsistent behavior when
it comes to configuration tables set up by pg_extension_config_dump, as
the data of all configuration tables would included in a dump even for
extensions not listed by a set of --extension switches.
The contents dumped changed depending on the schema where an extension
was installed when an extension was not listed. For example, an
extension installed under the public schema would have its configuration
data not dumped even when not listed with --extension, which was
inconsistent with the case of an extension installed on a non-public
schema, where the configuration would be dumped.
Per discussion with Noah, we have settled down to the simple rule of
dumping configuration data of an extension if it is listed in
--extension (default is unchanged and backward-compatible, to dump
everything on sight if there are no extensions directly listed). This
avoids some weird cases where the dumps depended on a --schema for one.
More tests are added to cover the gap, where we cross-check more
behaviors depending on --schema when an extension is not listed.
Reported-by: Noah Misch
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20210404220802.GA728316@rfd.leadboat.com
This GUC has always been classified as a planner option since its
introduction in 7c944bd, and was listed in postgresql.conf.sample. As
this parameter exists for testing purposes, move it to the section
dedicated to developer parameters and hence remove it from
postgresql.conf.sample. This will avoid any temptation to play with it
on production servers for users that should never really have to touch
this parameter.
The general description used for developer options is reworded a bit, to
take into account the inclusion of force_parallel_mode, per a suggestion
from Tom Lane.
Per discussion between Tom Lane, Bruce Momjian, Justin Pryzby, Bharath
Rupireddy and me.
Author: Justin Pryzby, Tom Lane
Discussion: https://postgr.es/m/20210403152402.GA8049@momjian.us
Mention that there are multiple TOAST compression methods and that the
compression method used is stored in a TOAST pointer along with the
other information that was stored there previously. Add a reference to
the documentation for default_toast_compression, where the supported
methods are listed, instead of duplicating that here.
I haven't tried to preserve the text claiming that pglz is "fairly
simple and very fast." I have no view on the veracity of the former
claim, but LZ4 seems to be faster (and to compress better) so it
seems better not to muddy the waters by talking about compression
speed as a strong point of PGLZ.
Patch by me, reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmoaw_YBwQhOS_hhEPPwFhfAnu+VCLs18EfGr9gQw1z4H-w@mail.gmail.com
This GUC has already been classified as LOGGING_WHAT, but its location
in postgresql.conf.sample and the documentation did not reflect that, so
fix those inconsistencies.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210404012546.GK6592@telsasoft.com
Updated documentation for new messages added for streaming of in-progress
transactions, as well as changes made to the existing messages. It also
updates the information of protocol versions supported for logical
replication.
Author: Ajin Cherian
Reviewed-by: Amit Kapila, Peter Smith, Euler Taveira
Discussion: https://postgr.es/m/CAFPTHDYHN9m=MZZct-B=BYg_TETvv+kXvL9RD2DpaBS5pGxGYg@mail.gmail.com
Whitespace between tags is significant, and in some cases it creates
extra vertical space in man pages. The fix is to remove some newlines
in the markup.
Comment fixes are applied on HEAD, and documentation improvements are
applied on back-branches where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210408164008.GJ6592@telsasoft.com
Backpatch-through: 9.6
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
This adds a function, pg_wait_for_backend_termination(), and a new
timeout argument to pg_terminate_backend(), which will wait for the
backend to actually terminate (with or without signaling it to do so
depending on which function is called). The default behaviour of
pg_terminate_backend() remains being timeout=0 which does not waiting.
For pg_wait_for_backend_termination() the default wait is 5 seconds.
Author: Bharath Rupireddy
Reviewed-By: Fujii Masao, David Johnston, Muhammad Usama,
Hou Zhijie, Magnus Hagander
Discussion: https://postgr.es/m/CALj2ACUBpunmyhYZw-kXCYs5NM+h6oG_7Df_Tn4mLmmUQifkqA@mail.gmail.com
Changing pg_stat_statements.track between 'all' and 'top' would control
if pg_stat_statements tracked just top level statements or also
statements inside functions, but when tracking all it would not
differentiate between the two. Being table to differentiate this is
useful both to track where the actual query is coming from, and to see
if there are differences in executions between the two.
To do this, add a boolean to the hash key indicating if the statement
was top level or not.
Experience from the pg_stat_kcache module shows that in at least some
"reasonable worloads" only <5% of the queries show up both top level and
nested. Based on this, admittedly small, dataset, this patch does not
try to de-duplicate those query *texts*, and will just store one copy
for the top level and one for the nested.
Author: Julien Rohaud
Reviewed-By: Magnus Hagander, Masahiro Ikeda
Discussion: https://postgr.es/m/20201202040516.GA43757@nol
When dealing with overloaded function or operator names, having
to look through a long list of matches is tedious. Let's extend
these commands to allow specification of (input) argument types
to let such results be trimmed down. Each additional argument
is treated the same as the pattern argument of \dT and matched
against the appropriate argument's type name.
While at it, fix \dT (and these new options) to recognize the
usual notation of "foo[]" for "the array type over foo", and
to handle the special abbreviations allowed by the backend
grammar, such as "int" for "integer".
Greg Sabino Mullane, revised rather significantly by me
Discussion: https://postgr.es/m/CAKAnmmLF9Hhu02N+s7uAyLc5J1xZReg72HQUoiKhNiJV3_jACQ@mail.gmail.com
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
Add a failsafe mechanism that is triggered by VACUUM when it notices
that the table's relfrozenxid and/or relminmxid are dangerously far in
the past. VACUUM checks the age of the table dynamically, at regular
intervals.
When the failsafe triggers, VACUUM takes extraordinary measures to
finish as quickly as possible so that relfrozenxid and/or relminmxid can
be advanced. VACUUM will stop applying any cost-based delay that may be
in effect. VACUUM will also bypass any further index vacuuming and heap
vacuuming -- it only completes whatever remaining pruning and freezing
is required. Bypassing index/heap vacuuming is enabled by commit
8523492d, which made it possible to dynamically trigger the mechanism
already used within VACUUM when it is run with INDEX_CLEANUP off.
It is expected that the failsafe will almost always trigger within an
autovacuum to prevent wraparound, long after the autovacuum began.
However, the failsafe mechanism can trigger in any VACUUM operation.
Even in a non-aggressive VACUUM, where we're likely to not advance
relfrozenxid, it still seems like a good idea to finish off remaining
pruning and freezing. An aggressive/anti-wraparound VACUUM will be
launched immediately afterwards. Note that the anti-wraparound VACUUM
that follows will itself trigger the failsafe, usually before it even
begins its first (and only) pass over the heap.
The failsafe is controlled by two new GUCs: vacuum_failsafe_age, and
vacuum_multixact_failsafe_age. There are no equivalent reloptions,
since that isn't expected to be useful. The GUCs have rather high
defaults (both default to 1.6 billion), and are expected to generally
only be used to make the failsafe trigger sooner/more frequently.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmgH3ySGYeC-m-eOBsa2=sDwa292-CFghV4rESYo39FsQ@mail.gmail.com
Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.
Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.
Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.
For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.
Bump catalog version.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default). It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.
To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
By default, have libpq set the TLS extension "Server Name Indication" (SNI).
This allows an SNI-aware SSL proxy to route connections. (This
requires a proxy that is aware of the PostgreSQL protocol, not just
any SSL proxy.)
In the future, this could also allow the server to use different SSL
certificates for different host specifications. (That would require
new server functionality. This would be the client-side functionality
for that.)
Since SNI makes the host name appear in cleartext in the network
traffic, this might be undesirable in some cases. Therefore, also add
a libpq connection option "sslsni" to turn it off.
Discussion: https://www.postgresql.org/message-id/flat/7289d5eb-62a5-a732-c3b9-438cee2cb709%40enterprisedb.com
Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.) Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further. (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)
This change corrects the terminology and removes the claim that
sensitive cursors are supported. It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF. Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.
There are no changes to cursor behavior in this patch.
Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com
The "authenticated identity" is the string used by an authentication
method to identify a particular user. In many common cases, this is the
same as the PostgreSQL username, but for some third-party authentication
methods, the identifier in use may be shortened or otherwise translated
(e.g. through pg_ident user mappings) before the server stores it.
To help administrators see who has actually interacted with the system,
this commit adds the capability to store the original identity when
authentication succeeds within the backend's Port, and generates a log
entry when log_connections is enabled. The log entries generated look
something like this (where a local user named "foouser" is connecting to
the database as the database user called "admin"):
LOG: connection received: host=[local]
LOG: connection authenticated: identity="foouser" method=peer (/data/pg_hba.conf:88)
LOG: connection authorized: user=admin database=postgres application_name=psql
Port->authn_id is set according to the authentication method:
bsd: the PostgreSQL username (aka the local username)
cert: the client's Subject DN
gss: the user principal
ident: the remote username
ldap: the final bind DN
pam: the PostgreSQL username (aka PAM username)
password (and all pw-challenge methods): the PostgreSQL username
peer: the peer's pw_name
radius: the PostgreSQL username (aka the RADIUS username)
sspi: either the down-level (SAM-compatible) logon name, if
compat_realm=1, or the User Principal Name if compat_realm=0
The trust auth method does not set an authenticated identity. Neither
does clientcert=verify-full.
Port->authn_id could be used for other purposes, like a superuser-only
extra column in pg_stat_activity, but this is left as future work.
PostgresNode::connect_{ok,fails}() have been modified to let tests check
the backend log files for required or prohibited patterns, using the
new log_like and log_unlike parameters. This uses a method based on a
truncation of the existing server log file, like issues_sql_like().
Tests are added to the ldap, kerberos, authentication and SSL test
suites.
Author: Jacob Champion
Reviewed-by: Stephen Frost, Magnus Hagander, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/c55788dd1773c521c862e8e0dddb367df51222be.camel@vmware.com
Commit f49bcd4ef3 disallowed postgres_fdw to import table partitions.
Because all data can be accessed through the partitioned table which
is the root of the partitioning hierarchy, importing only partitioned
table should allow access to all the data without creating extra objects.
This is a reasonable default when importing a whole schema. But there
may be the case where users want to explicitly import one of
a partitioned tables' partitions.
For that use case, this commit allows postgres_fdw to import tables or
foreign tables which are partitions of some other table only when they
are explicitly specified in LIMIT TO clause. It doesn't change
the behavior that any partitions not specified in LIMIT TO are
automatically excluded in IMPORT FOREIGN SCHEMA command.
Author: Matthias van de Meent
Reviewed-by: Bernd Helmle, Amit Langote, Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/CAEze2Whwg4i=mzApMe+PXxCEfgoZmHGqdqQFW7J4bmj_5p6t1A@mail.gmail.com
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
Previously if hot standby was enabled, archive recovery exited with
an error when it found WAL generated with wal_level=minimal.
But if hot standby was disabled, it just reported a warning and
continued in that case. Which could lead to data loss or errors
during normal operation. A warning was emitted, but users could
easily miss that and not notice this serious situation until
they encountered the actual errors.
To improve this situation, this commit changes archive recovery
so that it exits with FATAL error when it finds WAL generated with
wal_level=minimal whatever the setting of hot standby. This enables
users to notice the serious situation soon.
The FATAL error is thrown if archive recovery starts from a base
backup taken before wal_level is changed to minimal. When archive
recovery exits with the error, if users have a base backup taken
after setting wal_level to higher than minimal, they can recover
the database by starting archive recovery from that newer backup.
But note that if such backup doesn't exist, there is no easy way to
complete archive recovery, which may make the database server
unstartable and users may lose whole database. The commit adds
the note about this risk into the document.
Even in the case of unstartable database server, previously by just
disabling hot standby users could avoid the error during archive
recovery, forcibly start up the server and salvage data from it.
But note that this commit makes this procedure unavailable at all.
Author: Takamichi Osumi
Reviewed-by: Laurenz Albe, Kyotaro Horiguchi, David Steele, Fujii Masao
Discussion: https://postgr.es/m/OSBPR01MB4888CBE1DA08818FD2D90ED8EDF90@OSBPR01MB4888.jpnprd01.prod.outlook.com
This adds a new function, permute(), that generates pseudorandom
permutations of arbitrary sizes. This can be used to randomly shuffle
a set of values to remove unwanted correlations. For example,
permuting the output from a non-uniform random distribution so that
all the most common values aren't collocated, allowing more realistic
tests to be performed.
Formerly, hash() was recommended for this purpose, but that suffers
from collisions that might alter the distribution, so recommend
permute() for this purpose instead.
Fabien Coelho and Hironobu Suzuki, with additional hacking be me.
Reviewed by Thomas Munro, Alvaro Herrera and Muhammad Usama.
Discussion: https://postgr.es/m/alpine.DEB.2.21.1807280944370.5142@lancre
At present, if we want to update publications in a subscription, we
can use SET PUBLICATION. However, it requires supplying all
publications that exists and the new publications. If we want to add
new publications, it's inconvenient. The new syntax only supplies the
new publications. When the refresh is true, it only refreshes the new
publications.
Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
The previous implementation of EXTRACT mapped internally to
date_part(), which returned type double precision (since it was
implemented long before the numeric type existed). This can lead to
imprecise output in some cases, so returning numeric would be
preferrable. Changing the return type of an existing function is a
bit risky, so instead we do the following: We implement a new set of
functions, which are now called "extract", in parallel to the existing
date_part functions. They work the same way internally but use
numeric instead of float8. The EXTRACT construct is now mapped by the
parser to these new extract functions. That way, dumps of views
etc. from old versions (which would use date_part) continue to work
unchanged, but new uses will map to the new extract functions.
Additionally, the reverse compilation of EXTRACT now reproduces the
original syntax, using the new mechanism introduced in
40c24bfef9.
The following minor changes of behavior result from the new
implementation:
- The column name from an isolated EXTRACT call is now "extract"
instead of "date_part".
- Extract from date now rejects inappropriate field names such as
HOUR. It was previously mapped internally to extract from
timestamp, so it would silently accept everything appropriate for
timestamp.
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
Reported-by: Petr Fedorov <petr.fedorov@phystech.edu>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
Commit 3e98c0bafb added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.
This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.
Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.
On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.
When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.
There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.
Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap. Otherwise it works about like included
columns in other index types.
Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
A commonly requested use-case is to have a role who can run an
unfettered pg_dump without having to explicitly GRANT that user access
to all tables, schemas, et al, without that role being a superuser.
This address that by adding a "pg_read_all_data" role which implicitly
gives any member of this role SELECT rights on all tables, views and
sequences, and USAGE rights on all schemas.
As there may be cases where it's also useful to have a role who has
write access to all objects, pg_write_all_data is also introduced and
gives users implicit INSERT, UPDATE and DELETE rights on all tables,
views and sequences.
These roles can not be logged into directly but instead should be
GRANT'd to a role which is able to log in. As noted in the
documentation, if RLS is being used then an administrator may (or may
not) wish to set BYPASSRLS on the login role which these predefined
roles are GRANT'd to.
Reviewed-by: Georgios Kokolatos
Discussion: https://postgr.es/m/20200828003023.GU29590@tamriel.snowman.net
This mostly adds links to the glossary to the existing text, instead of
using <firstterm>. Heikki left this out of 29ad6595ef out of
stylistic concerns; these have since been addressed.
Author: Jürgen Purtz <juergen@purtz.de>
Discussion: https://postgr.es/m/67d7240f-8596-83fc-5e15-af06c128a0f5@purtz.de
According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed. But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same. But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.) Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.
For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.
Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType. It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.
Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
When editing the previous query buffer, if the editor is exited
without modifying the temp file then clear the query buffer,
rather than re-loading (and probably re-executing) the previous
query buffer. This reduces the probability of accidentally
re-executing something you didn't intend to.
Similarly, in "\e file", if the file isn't actually modified
then don't load it into the query buffer. And in "\ef" and
"\ev", if no changes are made then clear the query buffer
instead of loading the function or view definition into it.
Cases where we fail to invoke the editor at all, or it returns
a nonzero status, are treated like the no-file-modification case.
Laurenz Albe, reviewed by Jacob Champion
Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at
Provide a new GUC check_client_connection_interval that can be used to
check whether the client connection has gone away, while running very
long queries. It is disabled by default.
For now this uses a non-standard Linux extension (also adopted by at
least one other OS). POLLRDHUP is not defined by POSIX, and other OSes
don't have a reliable way to know if a connection was closed without
actually trying to read or write.
In future we might consider trying to send a no-op/heartbeat message
instead, but that could require protocol changes.
Author: Sergey Cherkashin <s.cherkashin@postgrespro.ru>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Konstantin Knizhnik <k.knizhnik@postgrespro.ru>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Tsunakawa, Takayuki/綱川 貴之 <tsunakawa.takay@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (much earlier version)
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru
Command-line options, or previous "ALTER (ROLE|DATABASE) ...
SET ROLE ..." commands, can change the value of the default role
for a session. In the presence of one of these, RESET ROLE will
change the current user identifier to the default role rather
than the session user identifier. Fix the documentation to
reflect this reality. Backpatch to all supported versions.
Author: Nathan Bossart
Reviewed-By: Laurenz Albe, David G. Johnston, Joe Conway
Reported by: Nathan Bossart
Discussion: https://postgr.es/m/flat/925134DB-8212-4F60-8AB1-B1231D750CB4%40amazon.com
Backpatch-through: 9.6
This commit adds a new option keep_connections that controls
whether postgres_fdw keeps the connections to the foreign server open
so that the subsequent queries can re-use them. This option can only be
specified for a foreign server. The default is on. If set to off,
all connections to the foreign server will be discarded
at the end of transaction. Closed connections will be re-established
when they are necessary by future queries using a foreign table.
This option is useful, for example, when users want to prevent
the connections from eating up the foreign servers connections
capacity.
Author: Bharath Rupireddy
Reviewed-by: Alexey Kondratov, Vignesh C, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVvrp5=AVp2PupEm+nAC8S4buqR3fJMmaCoc7ftT0aD2A@mail.gmail.com
The current instructions describing how to write the backup_label and
tablespace_map files are confusing. For example, opening a file in text
mode on Windows and copy-pasting the file's contents would result in a
failure at recovery because of the extra CRLF characters generated. The
documentation was not stating that clearly, and per discussion this is
not considered as a supported scenario.
This commit extends a bit the documentation to mention that it may be
required to open the file in binary mode before writing its data.
Reported-by: Wang Shenhao
Author: David Steele
Reviewed-by: Andrew Dunstan, Magnus Hagander
Discussion: https://postgr.es/m/8373f61426074f2cb6be92e02f838389@G08CNEXMBPEKD06.g08.fujitsu.local
Backpatch-through: 9.6
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu, Hou Zhijie
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
With the 'noError' argument, you can try to convert a buffer without
knowing the character boundaries beforehand. The functions now need to
return the number of input bytes successfully converted.
This is is a backwards-incompatible change, if you have created a custom
encoding conversion with CREATE CONVERSION. This adds a check to
pg_upgrade for that, refusing the upgrade if there are any user-defined
encoding conversions. Custom conversions are very rare, there are no
commonly used extensions that I know of that uses that feature. No other
objects can depend on conversions, so if you do have one, you can fairly
easily drop it before upgrading, and recreate it after the upgrade with
an updated version.
Add regression tests for built-in encoding conversions. This doesn't cover
every conversion, but it covers all the internal functions in conv.c that
are used to implement the conversions.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/e7861509-3960-538a-9025-b75a61188e01%40iki.fi
Some sections of the documentation used "exclusive lock" to describe
that an ACCESS EXCLUSIVE lock is taken during a given operation. This
can be confusing to the reader as ACCESS SHARE is allowed with an
EXCLUSIVE lock is used, but that would not be the case with what is
described on those parts of the documentation.
Author: Greg Rychlewski
Discussion: https://postgr.es/m/CAKemG7VptD=7fNWckFMsMVZL_zzvgDO6v2yVmQ+ZiBfc_06kCQ@mail.gmail.com
Backpatch-through: 9.6
It is possible that while decoding a prepared transaction, it gets aborted
concurrently via a ROLLBACK PREPARED command. In that case, we were
skipping all the changes and directly sending Rollback Prepared when we
find the same in WAL. However, the downstream has no idea of the GID of
such a transaction. So, ensure to send prepare even when a concurrent
abort is detected.
Author: Ajin Cherian
Reviewed-by: Markus Wanner, Amit Kapila
Discussion: https://postgr.es/m/f82133c6-6055-b400-7922-97dae9f2b50b@enterprisedb.com
This removes "Add Result Cache executor node". It seems that something
weird is going on with the tracking of cache hits and misses as
highlighted by many buildfarm animals. It's not yet clear what the
problem is as other parts of the plan indicate that the cache did work
correctly, it's just the hits and misses that were being reported as 0.
This is especially a bad time to have the buildfarm so broken, so
reverting before too many more animals go red.
Discussion: https://postgr.es/m/CAApHDvq_hydhfovm4=izgWs+C5HqEeRScjMbOgbpC-jRAeK3Yw@mail.gmail.com
Here we add a new executor node type named "Result Cache". The planner
can include this node type in the plan to have the executor cache the
results from the inner side of parameterized nested loop joins. This
allows caching of tuples for sets of parameters so that in the event that
the node sees the same parameter values again, it can just return the
cached tuples instead of rescanning the inner side of the join all over
again. Internally, result cache uses a hash table in order to quickly
find tuples that have been previously cached.
For certain data sets, this can significantly improve the performance of
joins. The best cases for using this new node type are for join problems
where a large portion of the tuples from the inner side of the join have
no join partner on the outer side of the join. In such cases, hash join
would have to hash values that are never looked up, thus bloating the hash
table and possibly causing it to multi-batch. Merge joins would have to
skip over all of the unmatched rows. If we use a nested loop join with a
result cache, then we only cache tuples that have at least one join
partner on the outer side of the join. The benefits of using a
parameterized nested loop with a result cache increase when there are
fewer distinct values being looked up and the number of lookups of each
value is large. Also, hash probes to lookup the cache can be much faster
than the hash probe in a hash join as it's common that the result cache's
hash table is much smaller than the hash join's due to result cache only
caching useful tuples rather than all tuples from the inner side of the
join. This variation in hash probe performance is more significant when
the hash join's hash table no longer fits into the CPU's L3 cache, but the
result cache's hash table does. The apparent "random" access of hash
buckets with each hash probe can cause a poor L3 cache hit ratio for large
hash tables. Smaller hash tables generally perform better.
The hash table used for the cache limits itself to not exceeding work_mem
* hash_mem_multiplier in size. We maintain a dlist of keys for this cache
and when we're adding new tuples and realize we've exceeded the memory
budget, we evict cache entries starting with the least recently used ones
until we have enough memory to add the new tuples to the cache.
For parameterized nested loop joins, we now consider using one of these
result cache nodes in between the nested loop node and its inner node. We
determine when this might be useful based on cost, which is primarily
driven off of what the expected cache hit ratio will be. Estimating the
cache hit ratio relies on having good distinct estimates on the nested
loop's parameters.
For now, the planner will only consider using a result cache for
parameterized nested loop joins. This works for both normal joins and
also for LATERAL type joins to subqueries. It is possible to use this new
node for other uses in the future. For example, to cache results from
correlated subqueries. However, that's not done here due to some
difficulties obtaining a distinct estimation on the outer plan to
calculate the estimated cache hit ratio. Currently we plan the inner plan
before planning the outer plan so there is no good way to know if a result
cache would be useful or not since we can't estimate the number of times
the subplan will be called until the outer plan is generated.
The functionality being added here is newly introducing a dependency on
the return value of estimate_num_groups() during the join search.
Previously, during the join search, we only ever needed to perform
selectivity estimations. With this commit, we need to use
estimate_num_groups() in order to estimate what the hit ratio on the
result cache will be. In simple terms, if we expect 10 distinct values
and we expect 1000 outer rows, then we'll estimate the hit ratio to be
99%. Since cache hits are very cheap compared to scanning the underlying
nodes on the inner side of the nested loop join, then this will
significantly reduce the planner's cost for the join. However, it's
fairly easy to see here that things will go bad when estimate_num_groups()
incorrectly returns a value that's significantly lower than the actual
number of distinct values. If this happens then that may cause us to make
use of a nested loop join with a result cache instead of some other join
type, such as a merge or hash join. Our distinct estimations have been
known to be a source of trouble in the past, so the extra reliance on them
here could cause the planner to choose slower plans than it did previous
to having this feature. Distinct estimations are also fairly hard to
estimate accurately when several tables have been joined already or when a
WHERE clause filters out a set of values that are correlated to the
expressions we're estimating the number of distinct value for.
For now, the costing we perform during query planning for result caches
does put quite a bit of faith in the distinct estimations being accurate.
When these are accurate then we should generally see faster execution
times for plans containing a result cache. However, in the real world, we
may find that we need to either change the costings to put less trust in
the distinct estimations being accurate or perhaps even disable this
feature by default. There's always an element of risk when we teach the
query planner to do new tricks that it decides to use that new trick at
the wrong time and causes a regression. Users may opt to get the old
behavior by turning the feature off using the enable_resultcache GUC.
Currently, this is enabled by default. It remains to be seen if we'll
maintain that setting for the release.
Additionally, the name "Result Cache" is the best name I could think of
for this new node at the time I started writing the patch. Nobody seems
to strongly dislike the name. A few people did suggest other names but no
other name seemed to dominate in the brief discussion that there was about
names. Let's allow the beta period to see if the current name pleases
enough people. If there's some consensus on a better name, then we can
change it before the release. Please see the 2nd discussion link below
for the discussion on the "Result Cache" name.
Author: David Rowley
Reviewed-by: Andy Fan, Justin Pryzby, Zhihong Yu
Tested-By: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAApHDvrPcQyQdWERGYWx8J%2B2DLUNgXu%2BfOSbQ1UscxrunyXyrQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvq=yQXr5kqhRviT2RhNKwToaWr9JAN5t+5_PzhuRJ3wvg@mail.gmail.com
The new appendix groups information on renamed or removed settings,
commands, etc into an out-of-the-way part of the docs.
The original id elements are retained in each subsection to ensure that
the same filenames are produced for HTML docs. This prevents /current/
links on the web from breaking, and allows users of the web docs
to follow links from old version pages to info on the changes in the
new version. Prior to this change, a link to /current/ for renamed
sections like the recovery.conf docs would just 404. Similarly if
someone searched for recovery.conf they would find the pg11 docs,
but there would be no /12/ or /current/ link, so they couldn't easily
find out that it was removed in pg12 or how to adapt.
Index entries are also added so that there's a breadcrumb trail for
users to follow when they know the old name, but not what we changed it
to. So a user who is trying to find out how to set standby_mode in
PostgreSQL 12+, or where pg_resetxlog went, now has more chance of
finding that information.
Craig Ringer and Stephen Frost
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/CAGRY4nzPNOyYQ_1-pWYToUVqQ0ThqP5jdURnJMZPm539fdizOg%40mail.gmail.com
Backpatch-through: 10
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
This allows something like
SELECT ... FROM t1 JOIN t2 USING (a, b, c) AS x
where x has the columns a, b, c and unlike a regular alias it does not
hide the range variables of the tables being joined t1 and t2.
Per SQL:2016 feature F404 "Range variable for common column names".
Reviewed-by: Vik Fearing <vik.fearing@2ndquadrant.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/454638cf-d563-ab76-a585-2564428062af@2ndquadrant.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
When specified, only extensions matching the given pattern are included
in dumps. Similarly to --table and --schema, when --strict-names is
used, a perfect match is required. Also, like the two other options,
this new option offers no guarantee that dependent objects have been
dumped, so a restore may fail on a clean database.
Tests are added in test_pg_dump/, checking after a set of positive and
negative cases, with or without an extension's contents added to the
dump generated.
Author: Guillaume Lelarge
Reviewed-by: David Fetter, Tom Lane, Michael Paquier, Asif Rehman,
Julien Rouhaud
Discussion: https://postgr.es/m/CAECtzeXOt4cnMU5+XMZzxBPJ_wu76pNy6HZKPRBL-j7yj1E4+g@mail.gmail.com
Transform the PQtrace output format from its ancient (and mostly
useless) byte-level output format to a logical-message-level output,
making it much more usable. This implementation allows the printing
code to be written (as it indeed was) by looking at the protocol
documentation, which gives more confidence that the three (docs, trace
code and actual code) actually match.
Author: 岩田 彩 (Aya Iwata) <iwata.aya@fujitsu.com>
Reviewed-by: 綱川 貴之 (Takayuki Tsunakawa) <tsunakawa.takay@fujitsu.com>
Reviewed-by: Kirk Jamison <k.jamison@fujitsu.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: 黒田 隼人 (Hayato Kuroda) <kuroda.hayato@fujitsu.com>
Reviewed-by: "Nagaura, Ryohei" <nagaura.ryohei@jp.fujitsu.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Greg Nancarrow <gregn4422@gmail.com>
Reviewed-by: Jim Doty <jdoty@pivotal.io>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/71E660EB361DF14299875B198D4CE5423DE3FBA4@g01jpexmbkw25