agreed these symbols are less easily confused. I made new pg_operator
entries (with new OIDs) for the old names, so as to provide backward
compatibility while making it pretty easy to remove the old names in
some future release cycle. This commit only touches the core datatypes,
contrib will be fixed separately.
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
on the same index page; we can avoid data copying as well as buffer refcount
manipulations in this common case. Makes for a small but noticeable
improvement in mergejoin speed.
Heikki Linnakangas
of the transaction ID counter. Nothing is done with the epoch except to
store it in checkpoint records, but this provides a foundation with which
add-on code can pretend that XIDs never wrap around. This is a severely
trimmed and rewritten version of the xxid patch submitted by Marko Kreen.
Per discussion, the epoch counter seems the only part of xxid that really
needs to be in the core server.
the rel, it's easy to get rid of the narrow race-condition window that
used to exist in VACUUM and CLUSTER. Did some minor code-beautification
work in the same area, too.
than N seconds apart. This allows a simple, if not very high performance,
means of guaranteeing that a PITR archive is no more than N seconds behind
real time. Also make pg_current_xlog_location return the WAL Write pointer,
add pg_current_xlog_insert_location to return the Insert pointer, and fix
pg_xlogfile_name_offset to return its results as a two-element record instead
of a smashed-together string, as per recent discussion.
Simon Riggs
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
operation every so often. This improves the usefulness of PITR log
shipping for hot standby: formerly, if the standby server crashed, it
was necessary to restart it from the last base backup and replay all
the WAL since then. Now it will only need to reread about the same
amount of WAL as the master server would. The behavior might also
come in handy during a long PITR replay sequence. Simon Riggs,
with some editorialization by Tom Lane.
to happen automatically during pg_stop_backup(). Add some functions for
interrogating the current xlog insertion point and for easily extracting
WAL filenames from the hex WAL locations displayed by pg_stop_backup
and friends. Simon Riggs with some editorialization by Tom Lane.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
vacuums. This allows a OLTP-like system with big tables to continue
regular vacuuming on small-but-frequently-updated tables while the
big tables are being vacuumed.
Original patch from Hannu Krossing, rewritten by Tom Lane and updated
by me.
When we are about to split an index page to do an insertion, first look
to see if any entries marked LP_DELETE exist on the page, and if so remove
them to try to make enough space for the desired insert. This should reduce
index bloat in heavily-updated tables, although of course you still need
VACUUM eventually to clean up the heap.
Junji Teramoto
recovery. In the first place, it doesn't work because slru's
latest_page_number isn't set up yet (this is why we've been hearing reports
of strange "apparent wraparound" log messages during crash recovery, but
only from people who'd managed to advance their next-mxact counters some
considerable distance from 0). In the second place, it seems a bit unwise
to be throwing away data during crash recovery anwyway. This latter
consideration convinces me to just disable truncation during recovery,
rather than computing latest_page_number and pushing ahead.
variable (this accounts for regression failures on PPC64, and in fact
won't work on any big-endian machine). Get rid of hardwired knowledge
about datum size rules; make it look just like datumCopy().
I'm going to insist on reversion of this entire patch unless pgrminclude
is upgraded to a less broken state, but in the meantime let's get contrib
passing regression again.
it can handle small fillfactors for ordinary-sized index entries without
failing on large ones; fix nbtinsert.c to distinguish leaf and nonleaf
pages; change the minimum fillfactor to 10% for all index types.
- Replace sorted array of entries in maintenance_work_mem to binary tree,
this should improve create performance.
- More precisely calculate allocated memory, eliminate leaks
with user-defined extractValue()
- Improve wordings in tsearch2
To this end, add a couple of columns to pg_class, relminxid and relvacuumxid,
based on which we calculate the pg_database columns after each vacuum.
We now force all databases to be vacuumed, even template ones. A backend
noticing too old a database (meaning pg_database.datminxid is in danger of
falling behind Xid wraparound) will signal the postmaster, which in turn will
start an autovacuum iteration to process the offending database. In principle
this is only there to cope with frozen (non-connectable) databases without
forcing users to set them to connectable, but it could force regular user
database to go through a database-wide vacuum at any time. Maybe we should
warn users about this somehow. Of course the real solution will be to use
autovacuum all the time ;-)
There are some additional improvements we could have in this area: for example
the vacuum code could be smarter about not updating pg_database for each table
when called by autovacuum, and do it only once the whole autovacuum iteration
is done.
I updated the system catalogs documentation, but I didn't modify the
maintenance section. Also having some regression tests for this would be nice
but it's not really a very straightforward thing to do.
Catalog version bumped due to system catalog changes.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
* new split algorithm (as proposed in http://archives.postgresql.org/pgsql-hackers/2006-06/msg00254.php)
* possible call pickSplit() for second and below columns
* add spl_(l|r)datum_exists to GIST_SPLITVEC -
pickSplit should check its values to use already defined
spl_(l|r)datum for splitting. pickSplit should set
spl_(l|r)datum_exists to 'false' (if they was 'true') to
signal to caller about using spl_(l|r)datum.
* support for old pickSplit(): not very optimal
but correct split
* remove 'bytes' field from GISTENTRY: in any case size of
value is defined by it's type.
* split GIST_SPLITVEC to two structures: one for using in picksplit
and second - for internal use.
* some code refactoring
* support of subsplit to rtree opclasses
TODO: add support of subsplit to contrib modules
this someday, but right now it seems that posix_fadvise is immature to
the point of being broken on many platforms ... and we don't have any
benchmark evidence proving it's worth spending time on.
per-tuple space overhead for sorts in memory. I chose to replace the
previous patch that tried to write out the bare minimum amount of data
when sorting on disk; instead, just dump the MinimalTuples as-is. This
wastes 3 to 10 bytes per tuple depending on architecture and null-bitmap
length, but the simplification in the writetup/readtup routines seems
worth it.
tuples with less header overhead than a regular HeapTuple, per my
recent proposal. Teach TupleTableSlot code how to deal with these.
As proof of concept, change tuplestore.c to store MinimalTuples instead
of HeapTuples. Future patches will expand the concept to other places
where it is useful.
changing semantics too much. statement_timestamp is now set immediately
upon receipt of a client command message, and the various places that used
to do their own gettimeofday() calls to mark command startup are referenced
to that instead. I have also made stats_command_string use that same
value for pg_stat_activity.query_start for both the command itself and
its eventual replacement by <IDLE> or <idle in transaction>. There was
some debate about that, but no argument that seemed convincing enough to
justify an extra gettimeofday() call.
for it. Hopefully will fix core dump evidenced by some buildfarm members
since fadvise patch went in. The actual definition of the function is not
ABI-compatible with compiler's default assumption in the absence of any
declaration, so it's clearly unsafe to try to call it without seeing a
declaration.
by creating a reference-count mechanism, similar to what we did a long time
ago for catcache entries. The back branches have an ugly solution involving
lots of extra copies, but this way is more efficient. Reference counting is
only applied to tupdescs that are actually in caches --- there seems no need
to use it for tupdescs that are generated in the executor, since they'll go
away during plan shutdown by virtue of being in the per-query memory context.
Neil Conway and Tom Lane
* some refactoring and simplify code int gistutil.c and gist.c
* now in some cases it can be called used-defined
picksplit method for non-first column in index, but here
is a place to do more.
* small fix of docs related to support NULL.
sections now isn't nested. All user-defined functions now is
called outside critsections. Small improvements in WAL
protocol.
TODO: improve XLOG replay
(relpages/reltuples). To do this, create formal support in heapam.c for
"overwrite" tuple updates (including xlog replay capability) and use that
instead of the ad-hoc overwrites we'd been using in VACUUM and CREATE INDEX.
Take the responsibility for updating stats during CREATE INDEX out of the
individual index AMs, and do it where it belongs, in catalog/index.c. Aside
from being more modular, this avoids having to update the same tuple twice in
some paths through CREATE INDEX. It's probably not measurably faster, but
for sure it's a lot cleaner than before.
into a single mostly-physical-order scan of the index. This requires some
ticklish interlocking considerations, but should create no material
performance impact on normal index operations (at least given the
already-committed changes to make scans work a page at a time). VACUUM
itself should get significantly faster in any index that's degenerated to a
very nonlinear page order. Also, we save one pass over the index entirely,
except in the case where there were no deletions to do and so only one pass
happened anyway.
Original patch by Heikki Linnakangas, rework by Tom Lane.
btgettuple and btgetmulti). This eliminates the problem of "re-finding" the
exact stopping point, since the stopping point is effectively always a page
boundary, and index items are never moved across pre-existing page boundaries.
A small penalty is that the keys_are_unique optimization is effectively
disabled (and, therefore, is removed in this patch), causing us to apply
_bt_checkkeys() to at least one more tuple than necessary when looking up a
unique key. However, the advantages for non-unique cases seem great enough to
accept this tradeoff. Aside from simplifying and (sometimes) speeding up the
indexscan code, this will allow us to reimplement btbulkdelete as a largely
sequential scan instead of index-order traversal, thereby significantly
reducing the cost of VACUUM. Those changes will come in a separate patch.
Original patch by Heikki Linnakangas, rework by Tom Lane.
This formulation requires every AM to provide amvacuumcleanup, unlike before,
but it's surely a whole lot cleaner. Also, add an 'amstorage' column to
pg_am so that we can get rid of hardwired knowledge in DefineOpClass().
thereby saving a visit to the metapage in most index searches/updates.
This wouldn't actually save any I/O (since in the old regime the metapage
generally stayed in cache anyway), but it does provide a useful decrease
in bufmgr traffic in high-contention scenarios. Per my recent proposal.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
whenever we start to read within that file. The first page carries
extra identification information that really ought to be checked, but
as the code stood, this was only checked when we switched sequentially
into a new WAL file, or if by chance the starting checkpoint record was
within the first page. This patch ensures that we will detect bogus
'long header' information before we start replaying the WAL sequence.
to occur between pg_start_backup() and pg_stop_backup(), even if the GUC
setting full_page_writes is OFF. Per discussion, doing this in combination
with the already-existing checkpoint during pg_start_backup() should ensure
safety against partial page updates being included in the backup. We do
not have to force full page writes to occur during normal PITR operation,
as I had first feared.
update no-longer-existing pages to fall through as no-ops, but make a note
of each page number referenced by such records. If we don't see a later
XLOG entry dropping the table or truncating away the page, complain at
the end of XLOG replay. Since this fixes the known failure mode for
full_page_writes = off, revert my previous band-aid patch that disabled
that GUC variable.
upper-level insertion completes a previously-seen split, we cannot simply grab
the downlink block number out of the buffer, because the buffer could contain
a later state of the page --- or perhaps the page doesn't even exist at all
any more, due to relation truncation. These possibilities have been masked up
to now because the use of full_page_writes effectively ensured that no xlog
replay routine ever actually saw a page state newer than its own change.
Since we're deprecating full_page_writes in 8.1.*, there's no need to fix this
in existing release branches, but we need a fix in HEAD if we want to have any
hope of re-allowing full_page_writes. Accordingly, adjust the contents of
btree WAL records so that we can always get the downlink block number from the
WAL record rather than having to depend on buffer contents. Per report from
Kevin Grittner and Peter Brant.
Improve a few comments in related code while at it.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
XLOG_BLCKSZ. This ought to help in preventing configuration mismatch
problems if anyone tries to ship PITR files between servers compiled
with different XLOG_BLCKSZ settings. Simon Riggs
instead a dedicated symbol. This probably makes no functional difference
for likely values of BLCKSZ, but it makes the intent clearer.
Simon Riggs, minor editorialization by Tom Lane.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.
incrementally by successive inserts rather than by sorting the data.
We were only using the slow path during bootstrap, apparently because
when first written it failed during bootstrap --- but it works fine now
AFAICT. Removing it saves a hundred or so lines of code and produces
noticeably (~10%) smaller initial states of the system catalog indexes.
While that won't make much difference for heavily-modified catalogs,
for the more static ones there may be a useful long-term performance
improvement.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
torn-page problems. This introduces some issues of its own, mainly
that there are now some critical sections of unreasonably broad scope,
but it's a step forward anyway. Further cleanup will require some
code refactoring that I'd prefer to get Oleg and Teodor involved in.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
failures even when the hardware and OS did nothing wrong. Per recent analysis
of a problem report from Alex Bahdushka.
For the moment I've just diked out the test of the parameter, rather than
removing the GUC infrastructure and documentation, in case we conclude that
there's something salvageable there. There seems no chance of it being
resurrected in the 8.1 branch though.
passed extend = true whenever we are reading a page we intend to reinitialize
completely, even if we think the page "should exist". This is because it
might indeed not exist, if the relation got truncated sometime after the
current xlog record was made and before the crash we're trying to recover
from. These two thinkos appear to explain both of the old bug reports
discussed here:
http://archives.postgresql.org/pgsql-hackers/2005-05/msg01369.php
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
more compliant with the error message style guide. In particular,
errdetail should begin with a capital letter and end with a period,
whereas errmsg should not. I also fixed a few related issues in
passing, such as fixing the repeated misspelling of "lexeme" in
contrib/tsearch2 (per Tom's suggestion).
possible ScanDirection alternatives rather than magic numbers
(-1, 0, 1). Also, use the ScanDirection macros in a few places
rather than directly checking whether `dir == ForwardScanDirection'
and the like. Per patch from James William Pye. His patch also
changed ScanDirection to be a "char" rather than an enum, which
I haven't applied.
we are not holding a buffer content lock; where it was, InterruptHoldoffCount
is positive and so we'd not respond to cancel signals as intended. Also
add missing vacuum_delay_point() call in btvacuumcleanup. This should fix
complaint from Evgeny Gridasov about failure to respond to SIGINT/SIGTERM
in a timely fashion (bug #2257).
during the vacuumcleanup scan that we're going to do anyway. Should
save a few cycles (one calculation per page, not per tuple) as well
as not having to depend on assumptions about heap and index being
in step.
I think this could probably be made to work for GIST too, but that
code looks messy enough that I'm disinclined to try right now.
partial. None of the existing AMs do anything useful except counting
tuples when there's nothing to delete, and we can get a tuple count
from the heap as long as it's not a partial index. (hash actually can
skip anyway because it maintains a tuple count in the index metapage.)
GIST is not currently able to exploit this optimization because, due to
failure to index NULLs, GIST is always effectively partial. Possibly
we should fix that sometime.
Simon Riggs w/ some review by Tom Lane.
just refer to btree index entries as plain IndexTuples, which is what
they have been for a very long time. This is mostly just an exercise
in removing extraneous notation, but it does save a palloc/pfree cycle
per index insertion.
and non-required keys in a btree index scan, mark the required scankeys
with private flag bits SK_BT_REQFWD and/or SK_BT_REQBKWD. This seems
at least marginally clearer to me, and it eliminates a wired-into-the-
data-structure assumption that required keys are consecutive. Even though
that assumption will remain true for the foreseeable future, having it
in there makes the code seem more complex than necessary.
to try to create a log segment file concurrently, but the code erroneously
specified O_EXCL to open(), resulting in a needless failure. Before 7.4,
it was even a PANIC condition :-(. Correct code is actually simpler than
what we had, because we can just say O_CREAT to start with and not need a
second open() call. I believe this accounts for several recent reports of
hard-to-reproduce "could not create file ...: File exists" errors in both
pg_clog and pg_subtrans.
are two basically different kinds of scankeys, and we ought to try harder
to indicate which is used in each place in the code. I've chosen the names
"search scankey" and "insertion scankey", though you could make about
as good an argument for "operator scankey" and "comparison function
scankey".
isn't being used anywhere anymore, and there seems no point in a generic
index_keytest() routine when two out of three remaining access methods
aren't using it. Also, add a comment documenting a convention for
letting access methods define private flag bits in ScanKey sk_flags.
There are no such flags at the moment but I'm thinking about changing
btree's handling of "required keys" to use flag bits in the keys
rather than a count of required key positions. Also, if some AM did
still want SK_NEGATE then it would be reasonable to treat it as a private
flag bit.
rather than "return expr;" -- the latter style is used in most of the
tree. I kept the parentheses when they were necessary or useful because
the return expression was complex.
use it. While it normally has been opened earlier during btree index
build, testing shows that it's possible for the link to be closed again
if an sinval reset occurs while the index is being built.
in favor of having just one set of macros that don't do HOLD/RESUME_INTERRUPTS
(hence, these correspond to the old SpinLockAcquire_NoHoldoff case).
Given our coding rules for spinlock use, there is no reason to allow
CHECK_FOR_INTERRUPTS to be done while holding a spinlock, and also there
is no situation where ImmediateInterruptOK will be true while holding a
spinlock. Therefore doing HOLD/RESUME_INTERRUPTS while taking/releasing a
spinlock is just a waste of cycles. Qingqing Zhou and Tom Lane.
setup. This protects against undesired changes in locale behavior
if someone carelessly does setlocale(LC_ALL, "") (and we know who
you are, perl guys).
#define HIGHBIT (0x80)
#define IS_HIGHBIT_SET(ch) ((unsigned char)(ch) & HIGHBIT)
and removed CSIGNBIT and mapped it uses to HIGHBIT. I have also added
uses for IS_HIGHBIT_SET where appropriate. This change is
purely for code clarity.
equal: if strcoll claims two strings are equal, check it with strcmp, and
sort according to strcmp if not identical. This fixes inconsistent
behavior under glibc's hu_HU locale, and probably under some other locales
as well. Also, take advantage of the now-well-defined behavior to speed up
texteq, textne, bpchareq, bpcharne: they may as well just do a bitwise
comparison and not bother with strcoll at all.
NOTE: affected databases may need to REINDEX indexes on text columns to be
sure they are self-consistent.
reduce contention for the former single LockMgrLock. Per my recent
proposal. I set it up for 16 partitions, but on a pgbench test this
gives only a marginal further improvement over 4 partitions --- we need
to test more scenarios to choose the number of partitions.
_bt_checkkeys(), instead of checking it in the top-level nbtree.c routines
as formerly. This saves a little bit of loop overhead, but more importantly
it lets us skip performing the index key comparisons for dead tuples.
checks, which were once needed because PageGetMaxOffsetNumber would
fail on empty pages, but are now just redundant. Also, don't set up
local variables that aren't needed in the fast path --- most of the
time, we only need to advance offnum and not step across a page boundary.
Motivated by noticing _bt_step at the top of OProfile profile for a
pgbench run.
SLRU area. The number of slots is still a compile-time constant (someday
we might want to change that), but at least it's a different constant for
each SLRU area. Increase number of subtrans buffers to 32 based on
experimentation with a heavily subtrans-bashing test case, and increase
number of multixact member buffers to 16, since it's obviously silly for
it not to be at least twice the number of multixact offset buffers.
lock, not exclusive, if the desired page is already in memory. This can
be demonstrated to be a significant win on the pg_subtrans cache when there
is a large window of open transactions. It should be useful for pg_clog
as well. I didn't try to make GetMultiXactIdMembers() use the code, as
that would have taken some restructuring, and what with the local cache
for multixact contents it probably wouldn't really make a difference.
Per my recent proposal.
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
when we first read the page, rather than checking them one at a time.
This allows us to take and release the buffer content lock just once
per page, instead of once per tuple. Since it's a shared lock the
contention penalty for holding the lock longer shouldn't be too bad.
We can safely do this only when using an MVCC snapshot; else the
assumption that visibility won't change over time is uncool. Therefore
there are now two code paths depending on the snapshot type. I also
made the same change in nodeBitmapHeapscan.c, where it can be done always
because we only support MVCC snapshots for bitmap scans anyway.
Also make some incidental cleanups in the APIs of these functions.
Per a suggestion from Qingqing Zhou.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
tuple in-place, but instead passes back an all-new tuple structure if
any changes are needed. This is a much cleaner and more robust solution
for the bug discovered by Alexey Beschiokov; accordingly, revert the
quick hack I installed yesterday.
With this change, HeapTupleData.t_datamcxt is no longer needed; will
remove it in a separate commit in HEAD only.
on every index page they read; in particular to catch the case of an
all-zero page, which PageHeaderIsValid allows to pass. It turns out
hash already had this idea, but it was just Assert()ing things rather
than doing a straight error check, and the Asserts were partially
redundant with PageHeaderIsValid anyway. Per recent failure example
from Jim Nasby. (gist still needs the same treatment.)
very narrow window in which SimpleLruReadPage or SimpleLruWritePage could
think that I/O was needed when it wasn't (and indeed the buffer had already
been assigned to another page). This would result in an Assert failure if
Asserts were enabled, and probably in silent data corruption if not.
Reported independently by Jim Nasby and Robert Creager.
I intend a more extensive fix when 8.2 development starts, but this is a
reasonably low-impact patch for the existing branches.
multixact's starting offset before the offset has been stored into the
SLRU file. A simple fix would be to hold the MultiXactGenLock until the
offset has been stored, but that looks like a big concurrency hit. Instead
rely on knowledge that unset offsets will be zero, and loop when we see
a zero. This requires a little extra hacking to ensure that zero is never
a valid value for the offset. Problem reported by Matteo Beccati, fix
ideas from Martijn van Oosterhout, Alvaro Herrera, and Tom Lane.
generated from subquery outputs: use the type info stored in the Var
itself. To avoid making ExecEvalVar and slot_getattr more complex
and slower, I split out the whole-row case into a separate ExecEval routine.
type ID information even when it's a record type. This is needed to
handle whole-row Vars referencing subquery outputs. Per example from
Richard Huxton.
This makes the error messages for PREPARE TRANSACTION, COMMIT PREPARED
etc. match the docs, which talk about "transaction identifier" not
"gid" or "global transaction identifier".
Steve Woodcock
the wrong buffer dirty when trying to kill a dead index entry that's on
a page after the one it started on. No risk of data corruption, just
inefficiency, but still a bug.
generated by bitmap index scans. Along the way, simplify and speed up
the code for counting sequential and index scans; it was both confusing
and inefficient to be taking care of that in the per-tuple loops, IMHO.
initdb forced because of internal changes in pg_stat view definitions.
was created on a machine with alignment rules and floating-point format
similar to the current machine. Per recent discussion, this seems like
a good idea with the increasing prevalence of 32/64 bit environments.
on a page, as suggested by ITAGAKI Takahiro. Also, change a few places
that were using some other estimates of max-items-per-page to consistently
use MaxOffsetNumber. This is conservatively large --- we could have used
the new MaxHeapTuplesPerPage macro, or a similar one for index tuples ---
but those places are simply declaring a fixed-size buffer and assuming it
will work, rather than actively testing for overrun. It seems safer to
size these buffers in a way that can't overflow even if the page is
corrupt.
saves nearly 700kB in the default shared memory segment size, which seems
worthwhile, and it is a feature that many users won't use anyway. Per
Heikki's argument, there is no point in a compromise value --- those who
are using 2PC at all will probably want it at least equal to max_connections.
But we can't set it to zero by default without breaking the prepared_xacts
regression test.
after the fact. Fix bug with incorrect test for whether we are at end
of logfile segment. Arrange for writes triggered by XLogInsert's
is-cache-more-than-half-full test to synchronize with the cache boundaries,
so that in long transactions we tend to write alternating halves of the
cache rather than randomly chosen portions of it; this saves one more
write syscall per cache load.
not accepting queries).
errmsg("database is not accepting queries to avoid
wraparound data loss in database \"%s\"",
errhint("Stop the postmaster and use a standalone
backend to VACUUM database \"%s\".",
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
delay and limit, both as global GUCs and as table-specific entries in
pg_autovacuum. stats_reset_on_server_start is now OFF by default,
but a reset is forced if we did WAL replay. XID-wrap vacuums do not
ANALYZE, but do FREEZE if it's a template database. Alvaro Herrera
ResourceOwner mechanism already released all reference counts for the
cache entries; therefore, we do not need to scan the catcache or relcache
at transaction end, unless we want to do it as a debugging crosscheck.
Do the crosscheck only in Assert mode. This is the same logic we had
previously installed in AtEOXact_Buffers to avoid overhead with large
numbers of shared buffers. I thought it'd be a good idea to do it here
too, in view of Kari Lavikka's recent report showing a real-world case
where AtEOXact_CatCache is taking a significant fraction of runtime.
track shared relations in a separate hashtable, so that operations done
from different databases are counted correctly. Add proper support for
anti-XID-wraparound vacuuming, even in databases that are never connected
to and so have no stats entries. Miscellaneous other bug fixes.
Alvaro Herrera, some additional fixes by Tom Lane.
Also, write multiple WAL buffers out in one write() operation.
ITAGAKI Takahiro
---------------------------------------------------------------------------
> If we disable writeback-cache and use open_sync, the per-page writing
> behavior in WAL module will show up as bad result. O_DIRECT is similar
> to O_DSYNC (at least on linux), so that the benefit of it will disappear
> behind the slow disk revolution.
>
> In the current source, WAL is written as:
> for (i = 0; i < N; i++) { write(&buffers[i], BLCKSZ); }
> Is this intentional? Can we rewrite it as follows?
> write(&buffers[0], N * BLCKSZ);
>
> In order to achieve it, I wrote a 'gather-write' patch (xlog.gw.diff).
> Aside from this, I'll also send the fixed direct io patch (xlog.dio.diff).
> These two patches are independent, so they can be applied either or both.
>
>
> I tested them on my machine and the results as follows. It shows that
> direct-io and gather-write is the best choice when writeback-cache is off.
> Are these two patches worth trying if they are used together?
>
>
> | writeback | fsync= | fdata | open_ | fsync_ | open_
> patch | cache | false | sync | sync | direct | direct
> ------------+-----------+--------+-------+-------+--------+---------
> direct io | off | 124.2 | 105.7 | 48.3 | 48.3 | 48.2
> direct io | on | 129.1 | 112.3 | 114.1 | 142.9 | 144.5
> gather-write| off | 124.3 | 108.7 | 105.4 | (N/A) | (N/A)
> both | off | 131.5 | 115.5 | 114.4 | 145.4 | 145.2
>
> - 20runs * pgbench -s 100 -c 50 -t 200
> - with tuning (wal_buffers=64, commit_delay=500, checkpoint_segments=8)
> - using 2 ATA disks:
> - hda(reiserfs) includes system and wal.
> - hdc(jfs) includes database files. writeback-cache is always on.
>
> ---
> ITAGAKI Takahiro
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
basic regression tests for GiST to the standard regression tests.
I took the opportunity to add an rtree-equivalent gist opclass for
circles; the contrib version only covered boxes and polygons, but
indexing circles is very handy for distance searches.
the difference between checkpoints forced due to WAL segment consumption
and checkpoints forced for other reasons (such as CREATE DATABASE). Avoid
generating 'checkpoints are occurring too frequently' messages when the
checkpoint wasn't caused by WAL segment consumption. Per gripe from
Chris K-L.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
- full concurrency for insert/update/select/vacuum:
- select and vacuum never locks more than one page simultaneously
- select (gettuple) hasn't any lock across it's calls
- insert never locks more than two page simultaneously:
- during search of leaf to insert it locks only one page
simultaneously
- while walk upward to the root it locked only parent (may be
non-direct parent) and child. One of them X-lock, another may
be S- or X-lock
- 'vacuum full' locks index
- improve gistgetmulti
- simplify XLOG records
Fix bug in index_beginscan_internal: LockRelation may clean
rd_aminfo structure, so move GET_REL_PROCEDURE after LockRelation
to the existing X-direction tests. An rtree class now includes 4 actual
2-D tests, 4 1-D X-direction tests, and 4 1-D Y-direction tests.
This involved adding four new Y-direction test operators for each of
box and polygon; I followed the PostGIS project's lead as to the names
of these operators.
NON BACKWARDS COMPATIBLE CHANGE: the poly_overleft (&<) and poly_overright
(&>) operators now have semantics comparable to box_overleft and box_overright.
This is necessary to make r-tree indexes work correctly on polygons.
Also, I changed circle_left and circle_right to agree with box_left and
box_right --- formerly they allowed the boundaries to touch. This isn't
actually essential given the lack of any r-tree opclass for circles, but
it seems best to sync all the definitions while we are at it.
polygon operators (<<, &<, >>, &>). Per ideas originally put forward
by andrew@supernews and later rediscovered by moi. This patch just
fixes the existing opclasses, and does not add any new behavior as I
proposed earlier; that can be sorted out later. In principle this
could be back-patched, since it changes only search behavior and not
system catalog entries nor rtree index contents. I'm not currently
planning to do that, though, since I think it could use more testing.
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
2. improve vacuum for gist
- use FSM
- full vacuum:
- reforms parent tuple if it's needed
( tuples was deleted on child page or parent tuple remains invalid
after crash recovery )
- truncate index file if possible
3. fixes bugs and mistakes
scankeys arrays that it needs can never have more than INDEX_MAX_KEYS
entries, so it's reasonable to just allocate them as fixed-size local
arrays, and save the cost of palloc/pfree. Not a huge savings, but
a cycle saved is a cycle earned ...
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
given reasonably short lifespans for prepared transactions, this should
mean that only a small minority of state files ever need to be fsynced
at all. Per discussion with Heikki Linnakangas.
old suggestion by Oliver Jowett. Also, add a transaction column to the
pg_locks view to show the xid of each transaction holding or awaiting
locks; this allows prepared transactions to be properly associated with
the locks they own. There was already a column named 'transaction',
and I chose to rename it to 'transactionid' --- since this column is
new in the current devel cycle there should be no backwards compatibility
issue to worry about.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
routines in the index's relcache entry, instead of doing a fresh fmgr_info
on every index access. We were already doing this for the index's opclass
support functions; not sure why we didn't think to do it for the AM
functions too. This supersedes the former method of caching (only)
amgettuple in indexscan scan descriptors; it's an improvement because the
function lookup can be amortized across multiple statements instead of
being repeated for each statement. Even though lookup for builtin
functions is pretty cheap, this seems to drop a percent or two off some
simple benchmarks.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
external projects, we should be careful about what parts of the GiST
API are considered implementation details, and which are part of the
public API. Therefore, I've moved internal-only declarations into
gist_private.h -- future backward-incompatible changes to gist.h should
be made with care, to avoid needlessly breaking external GiST extensions.
Also did some related header cleanup: remove some unnecessary #includes
from gist.h, and remove some unused definitions: isAttByVal(), _gistdump(),
and GISTNStrategies.
- make sure we always invoke user-supplied GiST methods in a short-lived
memory context. This means the backend isn't exposed to any memory leaks
that be in those methods (in fact, it is probably a net loss for most
GiST methods to bother manually freeing memory now). This also means
we can do away with a lot of ugly manual memory management in the
GiST code itself.
- keep the current page of a GiST index scan pinned, rather than doing a
ReadBuffer() for each tuple produced by the scan. Since ReadBuffer() is
expensive, this is a perf. win
- implement dead tuple killing for GiST indexes (which is easy to do, now
that we keep a pin on the current scan page). Now all the builtin indexes
implement dead tuple killing.
- cleanup a lot of ugly code in GiST
in an inconsistent state. (This is only latent because in reality
ExecSeqRestrPos is dead code at the moment ... but someday maybe it won't
be.) Add some comments about what the API for plan node mark/restore
actually is, because it's not immediately obvious.
methods: they all invoke UpdateStats() since they have computed the
number of heap tuples, so I created a function in catalog/index.c that
each AM now calls.
memset() or MemSet() to a char *. For one, memset()'s first argument is
a void *, and further void * can be implicitly coerced to/from any other
pointer type.
and VACUUM: in the interval between adding a new page to the relation
and formatting it, it was possible for VACUUM to come along and decide
it should format the page too. Though not harmful in itself, this would
cause data loss if a third transaction were able to insert tuples into
the vacuumed page before the original extender got control back.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
only one argument. (Per recent discussion, the option to accept multiple
arguments is pretty useless for user-defined types, and would be a likely
source of security holes if it was used.) Simplify call sites of
output/send functions to not bother passing more than one argument.
is contention for a tuple-level lock. This solves the problem of a
would-be exclusive locker being starved out by an indefinite succession
of share-lockers. Per recent discussion with Alvaro.
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
critical and noncritical contexts (an example of noncritical being
post-checkpoint removal of dead xlog segments). In the critical cases
the CRIT_SECTION mechanism will cause ERROR to be promoted to PANIC
anyway, and in the noncritical cases we shouldn't let an error take
down the entire database. Arguably there should be *no* explicit
PANIC errors in this module, only more START/END_CRIT_SECTION calls,
but I didn't go that far. (Yet.)
when recycling a large number of xlog segments during checkpoint.
The former behavior searched from the same start point each time,
requiring O(checkpoint_segments^2) stat() calls to relocate all the
segments. Instead keep track of where we stopped last time through.
assuming comparison of atttypid is sufficient. In a dropped column
atttypid will be 0, and we'd better check the physical-storage data
to make sure the tupdescs are physically compatible.
I do not believe there is a real risk before 8.0, since before that
we only used this routine to compare successive states of the tupdesc
for a particular relation. But 8.0's typcache.c might be comparing
arbitrary tupdescs so we'd better play it safer.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
avoid encroaching on the 'user' range of OIDs by allowing automatic
OID assignment to use values below 16k until we reach normal operation.
initdb not forced since this doesn't make any incompatible change;
however a lot of stuff will have different OIDs after your next initdb.
deferred triggers: either one can create more work for the other,
so we have to loop till it's all gone. Per example from andrew@supernews.
Add a regression test to help spot trouble in this area in future.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
transaction rollback via UNDO but I think that's highly unlikely to
happen, so we may as well remove the stubs. (Someday we ought to
rip out the stub xxx_undo routines, too.) Per Alvaro.
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
currently does. This is now the default Win32 wal sync method because
we perfer o_datasync to fsync.
Also, change Win32 fsync to a new wal sync method called
fsync_writethrough because that is the behavior of _commit, which is
what is used for fsync on Win32.
Backpatch to 8.0.X.
Tom Lane
Teodor Sigaev
Alvaro Herrera
Peter Eisentraut
Bruce Momjian
Neil Conway
Tatsuo Ishii