When using the following functions, users could see various types of
errors of the type "cache lookup failed for OID XXX" with elog(), that
can only be used for internal errors:
* pg_describe_object()
* pg_identify_object()
* pg_identify_object_as_address()
The set of APIs managing object addresses for all object types are made
smarter by gaining a new argument "missing_ok" that allows any caller to
control if an error is raised or not on an undefined object. The SQL
functions listed above are changed to handle the case where an object is
missing.
Regression tests are added for all object types for the cases where
these are undefined. Before this commit, these cases failed with cache
lookup errors, and now they basically return NULL (minus the name of the
object type requested).
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
reparameterize_path_by_child() failed to reparameterize BitmapAnd
and BitmapOr paths. This matters only if such a path is chosen as
the inside of a nestloop partition-wise join, where we have to pass
in parameters from the outside of the nestloop. If that did happen,
we generated a bad plan that would likely lead to crashes at execution.
This is not entirely reparameterize_path_by_child()'s fault though;
it's the victim of an ancient decision (my ancient decision, I think)
to not bother filling in param_info in BitmapAnd/Or path nodes. That
caused the function to believe that such nodes and their children
contain no parameter references and so need not be processed.
In hindsight that decision looks pretty penny-wise and pound-foolish:
while it saves a few cycles during path node setup, we do commonly
need the information later. In particular, by reversing the decision
and requiring valid param_info data in all nodes of a bitmap path
tree, we can get rid of indxpath.c's get_bitmap_tree_required_outer()
function, which computed the data on-demand. It's not unlikely that
that nets out as a savings of cycles in many scenarios. A couple
of other things in indxpath.c can be simplified as well.
While here, get rid of some cases in reparameterize_path_by_child()
that are visibly dead or useless, given that we only care about
reparameterizing paths that can be on the inside of a parameterized
nestloop. This case reminds one of the maxim that untested code
probably does not work, so I'm unwilling to leave unreachable code
in this function. (I did leave the T_Gather case in place even
though it's not reached in the regression tests. It's not very
clear to me when the planner might prefer to put Gather below
rather than above a nestloop, but at least in principle the case
might be interesting.)
Per bug #16536, originally from Arne Roland but with a test case
by Andrew Gierth. Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/16536-2213ee0b3aad41fd@postgresql.org
Three groups of issues needed to be addressed:
load_external_function() and related functions returned PGFunction,
even though not necessarily all callers are looking for a function of
type PGFunction. Since these functions are really just wrappers
around dlsym(), change to return void * just like dlsym().
In dynahash.c, we are using strlcpy() where a function with a
signature like memcpy() is expected. This should be safe, as the new
comment there explains, but the cast needs to be augmented to avoid
the warning.
In PL/Python, methods all need to be cast to PyCFunction, per Python
API, but this now runs afoul of these warnings. (This issue also
exists in core CPython.)
To fix the second and third case, we add a new type pg_funcptr_t that
is defined specifically so that gcc accepts it as a special function
pointer that can be cast to any other function pointer without the
warning.
Also add -Wcast-function-type to the standard warning flags, subject
to configure check.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1e97628e-6447-b4fd-e230-d109cec2d584%402ndquadrant.com
An ALTER TABLE to validate a foreign key in which another subcommand
already caused a pending table rewrite could fail due to ALTER TABLE
attempting to validate the foreign key before the actual table rewrite
takes place. This situation could result in an error such as:
ERROR: could not read block 0 in file "base/nnnnn/nnnnn": read only 0 of 8192 bytes
The failure here was due to the SPI call which validates the foreign key
trying to access an index which is yet to be rebuilt.
Similarly, we also incorrectly tried to validate CHECK constraints before
the heap had been rewritten.
The fix for both is to delay constraint validation until phase 3, after
the table has been rewritten. For CHECK constraints this means a slight
behavioral change. Previously ALTER TABLE VALIDATE CONSTRAINT on
inheritance tables would be validated from the bottom up. This was
different from the order of evaluation when a new CHECK constraint was
added. The changes made here aligns the VALIDATE CONSTRAINT evaluation
order for inheritance tables to be the same as ADD CONSTRAINT, which is
generally top-down.
Reported-by: Nazli Ugur Koyluoglu, using SQLancer
Discussion: https://postgr.es/m/CAApHDvp%3DZXv8wiRyk_0rWr00skhGkt8vXDrHJYXRMft3TjkxCA%40mail.gmail.com
Backpatch-through: 9.5 (all supported versions)
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
The qual pushdown logic assumed that all Vars in a restriction clause
must be Vars referencing subquery outputs; but since we introduced
LATERAL, it's possible for such a Var to be a lateral reference instead.
This led to an assertion failure in debug builds. In a non-debug
build, there might be no ill effects (if qual_is_pushdown_safe decided
the qual was unsafe anyway), or we could get failures later due to
construction of an invalid plan. I've not gone to much length to
characterize the possible failures, but at least segfaults in the
executor have been observed.
Given that this has been busted since 9.3 and it took this long for
anybody to notice, I judge that the case isn't worth going to great
lengths to optimize. Hence, fix by just teaching qual_is_pushdown_safe
that such quals are unsafe to push down, matching the previous behavior
when it accidentally didn't fail.
Per report from Tom Ellis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20200713175124.GQ8220@cloudinit-builder
Remove previous hack in KeepLogSeg that added a case to deal with a
(badly represented) invalid segment number. This was added for the sake
of GetWALAvailability. But it's not needed if in that function we
initialize the segment number to be retreated to the currently being
written segment, so do that instead.
Per valgrind-running buildfarm member skink, and some sparc64 animals.
Discussion: https://postgr.es/m/1724648.1594230917@sss.pgh.pa.us
The stats with this commit was available only for WALSenders, however,
users might want to see for backends doing logical decoding via SQL API.
Then, users might want to reset and access these stats across server
restart which was not possible with the current patch.
List of commits reverted:
caa3c4242c Don't call elog() while holding spinlock.
e641b2a995 Doc: Update the documentation for spilled transaction
statistics.
5883f5fe27 Fix unportable printf format introduced in commit 9290ad198.
9290ad198b Track statistics for spilling of changes from ReorderBuffer.
Additionaly, remove the release notes entry for this feature.
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
This includes two changes:
- Addition of a new function pg_xact_commit_timestamp_origin() able, for
a given transaction ID, to return the commit timestamp and replication
origin of this transaction. An equivalent function existed in
pglogical.
- Addition of the replication origin to pg_last_committed_xact().
The commit timestamp manager includes already APIs able to return the
replication origin of a transaction on top of its commit timestamp, but
the code paths for replication origins were never stressed as those
functions have never looked for a replication origin, and the SQL
functions available have never included this information since their
introduction in 73c986a.
While on it, refactor a test of modules/commit_ts/ to use tstzrange() to
check that a transaction timestamp is within the wanted range, making
the test a bit easier to read.
Bump catalog version.
Author: Movead Li
Reviewed-by: Madan Kumar, Michael Paquier
Discussion: https://postgr.es/m/2020051116430836450630@highgo.ca
The raw_buf and line_buf buffers aren't used when reading binary format,
so skip allocating them. raw_buf is 64K so that seems like a worthwhile
savings. An unused line_buf only wastes 1K, but as long as we're checking
it's free to avoid allocating that too.
Bharath Rupireddy, tweaked a bit by me
Discussion: https://postgr.es/m/CALj2ACXcCKaGPY0whowqrJ4OPJvDnTssgpGCzvuFQu5z0CXb-g@mail.gmail.com
"relkind" normally refers to the char field from pg_class. However, in
the parse nodes AlterTableStmt and CreateTableAsStmt, "relkind" was used
for a field of type enum ObjectType, that could refer to other object
types than those possible for a relkind. Such fields being usually
named "objtype", switch the name in both structures to make things more
consistent. Note that this led to some confusion in functions that
also operate on a RangeTableEntry object, which also has a field named
"relkind".
This naming goes back to commit 09d4e96, where only OBJECT_TABLE and
OBJECT_INDEX were used. This got extended later to use as well
OBJECT_TYPE with e440e12, not really a relation kind.
Author: Mark Dilger
Reviewed-by: Daniel Gustafsson, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/609181AE-E399-47C7-9221-856E0F96BF93@enterprisedb.com
SQL standard doesn't define numeric Inf or NaN values. It appears even more
ridiculous to support then in jsonpath assuming JSON doesn't support these
values as well. This commit forbids returning NaN from .double(), which was
previously allowed. NaN can't be result of inner-jsonpath computation over
non-NaNs. So, we can not expect NaN in the jsonpath output.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/203949.1591879542%40sss.pgh.pa.us
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
When jsonpath .double() method detects that numeric or string can't be
converted to double precision, it throws an error. This commit makes these
errors explicitly express the reason of failure.
Discussion: https://postgr.es/m/CAPpHfdtqJtiSXkP7tOXez18NxhLUH_-75bL8%3DOce4Ki%2Bbv7V6Q%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Backpatch-through: 12
This message was being emitted on the grounds that only crashed
summarization could cause it, but in reality even an aborted vacuum
could do it ... which makes it way too noisy, particularly since it
shows up in regression tests and makes them die.
Reported by Tom Lane.
Discussion: https://postgr.es/m/489091.1593534251@sss.pgh.pa.us
Due to not having our signals straight about CRLF vs. LF line
termination, the output of pg_current_logfile() included a trailing
\r on Windows. To fix, force the file descriptor it uses into text
mode.
While here, move a couple of local variable declarations to make
the function's logic clearer.
In v12 and v13, also back-patch the test added by 1c4e88e2f so that
this function has some test coverage. However, the 004_logrotate.pl
test script doesn't exist before v12, and it didn't seem worth adding
to older branches just for this.
Per report from Thomas Kellerer. Back-patch to v10 where this
function was added.
Discussion: https://postgr.es/m/412ae8da-76bb-640f-039a-f3513499e53d@gmx.net
The Sort node does not put a space between the number of kilobytes and
the "kB" of memory or disk space used, but HashAgg does. Here we align
HashAgg to do the same as Sort. Sort has been displaying this
information for longer than HashAgg, so it makes sense to align HashAgg
to Sort rather than the other way around.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20200708163021.GW4107@telsasoft.com
Backpatch-through: 13, where the hashagg started showing these details
Since slot_keep_segs indicates the number of WAL segments not LSN,
its datatype should not be XLogRecPtr.
Back-patch to v13 where this issue was added.
Reported-by: Atsushi Torikoshi
Author: Atsushi Torikoshi, tweaked by Fujii Masao
Discussion: https://postgr.es/m/ebd0d674f3e050222238a960cac5251a@oss.nttdata.com
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
Previously we checked that the ssl pointer was not null, but this puts a
requirement on there being such a pointer which may not be true in
future multi-ssl-library supporting times. This seems to have been an
oversight in 9029f4b374, but hasn't really had any effect since we only
have one library.
Author: Daniel Gustafsson
nbtree index builds cannot write out an empty page. That would mean
that there was no way to create a pivot tuple pointing to the page one
level up, since _bt_truncate() generates one based on page's firstright
tuple.
Replace the unnecessary PageIsEmpty() check with an assertion that
checks that the page has space for at least two line pointers (the
would-be high key line pointer, plus at least one valid "data item"
tuple line pointer).
The PageIsEmpty() check was added by commit 5d9f146c over 20 years ago.
It looks like it has always been unnecessary.
When we invented arrays of composite types (commit bc8036fc6),
we excluded system catalogs, basically just on the grounds of not
wanting to bloat pg_type. However, it's definitely inconsistent that
catalogs' composite types can't be put into arrays when others can.
Another problem is that the exclusion is done by checking
IsUnderPostmaster in heap_create_with_catalog, which means that
(1) If a user tries to create a table in single-user mode, it doesn't
get an array type. That's bad in itself, plus it breaks pg_upgrade.
(2) If someone drops and recreates a system view or information_schema
view (as we occasionally recommend doing), it will now have an array
type where it did not before, making for still more inconsistency.
So this is all pretty messy. Let's just get rid of the inconsistency
and decree that system-created relations should have array types if
similar user-created ones would, i.e. it only depends on the relkind.
As of HEAD, that means that the initial contents of pg_type grow from
411 rows to 605, which is a lot of growth percentage-wise, but it's
still quite a small catalog compared to others.
Wenjing Zeng, reviewed by Shawn Wang, further hacking by me
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
This introduces a new set of extended routines for procedure and
operator name lookups, with a flag bitmask argument that can modify the
result. The following options are available:
- Force schema qualification, ignoring search_path. This is similar to
the existing option for format_{operator|procedure}_qualified().
- Force NULL as result instead of a numeric OID for an undefined
object. This option is new.
This is a refactoring similar to 1185c78, that will be used for a future
patch to improve the SQL functions providing information using object
addresses for undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
If a type scanned is undefined, type format routines have two behaviors
depending on if FORMAT_TYPE_ALLOW_INVALID is used by the caller or not:
- Issue a cache lookup error
- Return an undefined type name "???", "???[]" or "-"
The current interface is not really helpful for callers willing to
format properly a type name, but still make sure that the type is
defined as there could be types matching the strings generated when
looking for an undefined type, even if that should not be a problem in
practice. In order to counter that, add a new flag called
FORMAT_TYPE_INVALID_AS_NULL that returns a NULL result instead of "???
or "-" which does not generate an error. This flag will be used in a
follow-up patch improving the set of SQL functions showing information
for object addresses when it comes to undefined objects.
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
The cfbot and some BF animals are complaining about the previous
read_binary_file commit because of ignoring return value of ‘fread’.
So let's make everyone happy by testing the return value even though
not strictly needed.
Reported by Justin Pryzby, and suggested patch by Tom Lane. Backpatched
to v11 same as the previous commit.
Reported-By: Justin Pryzby
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
Commit ecd9e9f0b fixed the problem in the wrong place, causing unwanted
side-effects on the behavior of GetNextTempTableSpace(). Instead,
let's make SharedFileSetInit() responsible for subbing in the value
of MyDatabaseTableSpace when the default tablespace is called for.
The convention about what is in the tempTableSpaces[] array is
evidently insufficiently documented, so try to improve that.
It also looks like SharedFileSetInit() is doing the wrong thing in the
case where temp_tablespaces is empty. It was hard-wiring use of the
pg_default tablespace, but it seems like using MyDatabaseTableSpace
is more consistent with what happens for other temp files.
Back-patch the reversion of PrepareTempTablespaces()'s behavior to
9.5, as ecd9e9f0b was. The changes in SharedFileSetInit() go back
to v11 where that was introduced. (Note there is net zero code change
before v11 from these two patch sets, so nothing to release-note.)
Magnus Hagander and Tom Lane
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
A likely copy/paste error in 98e8b48053 from back in 2004 would
cause temp tablespace to be reset to InvalidOid if temp_tablespaces
was set to the same value as the primary tablespace in the database.
This would cause shared filesets (such as for parallel hash joins)
to ignore them, putting the temporary files in the default tablespace
instead of the configured one. The bug is in the old code, but it
appears to have been exposed only once we had shared filesets.
Reviewed-By: Daniel Gustafsson
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
Backpatch-through: 9.5
Do the same for the maintenance_work_mem global variable.
Oversight in commit 848ae330a4, which increased the previous defaults
for work_mem and maintenance_work_mem by 4X.
Make some of the variable names in _bt_search() consistent with
corresponding variables within _bt_getstackbuf(). This naming scheme is
clearer because the variable names always express a relationship between
the currently locked buffer/page and some other page.
src/backend/replication/README includes since 32bc08b a basic
description of the WAL receiver hooks available in walreceiver.h for a
module like libpqwalreceiver, but the README has never been updated to
reflect changes done to the hooks, so the contents of the README have
rotten with the time. This commit moves the description from the README
to walreceiver.h, where it will be hard to miss that a description
update or addition is needed depending on the modifications done to the
hooks.
Each hook now includes a description of what it does in walreceiver.h,
and the replication's README mentions walreceiver.h.
Thanks also to Amit Kapila for the discussion.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/20200502024606.GA471944@paquier.xyz
This is a follow-up commit similar to 68de144, with more places in the
backend code simplified with the macros able to assign values to the
fields of ObjectAddress. The code paths changed here could be
transitioned later into using more grouping when inserting dependency
records, simplifying this future work.
Author: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
Use separate functions to save and restore error context information as
that made code easier to understand. Also, make it clear that the index
information required for error context is sane.
Author: Andres Freund, Justin Pryzby, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CAA4eK1LWo+v1OWu=Sky27GTGSCuOmr7iaURNbc5xz6jO+SaPeA@mail.gmail.com
When creating an extension, the same type of dependency is used when
registering a dependency to a schema and required extensions. This
improves the code so as those dependencies are not recorded one-by-one,
but grouped together. Note that this has as side effect to remove
duplicate dependency entries, even if it should not happen in practice
as extensions listed as required in a control file should be listed only
once.
Extracted from a larger patch by the same author.
Author: Daniel Dustafsson
Discussion: https://postgr.es/m/20200629065535.GA183079@paquier.xyz
The "Disk Usage" and "HashAgg Batches" properties in the EXPLAIN ANALYZE
output for HashAgg were previously only shown if the number of batches
was greater than 0. Here we change this so that these properties are
always shown for EXPLAIN ANALYZE formats other than "text". The idea here
is that since the HashAgg could have spilled to disk if there had been
more data or groups to aggregate, then it's relevant that we're clear in
the EXPLAIN ANALYZE output when no spilling occurred in this particular
execution of the given plan.
For the "text" EXPLAIN format, we still hide these properties when no
spilling occurs. This EXPLAIN format is designed to be easy for humans
to read. To maintain the readability we have a higher threshold for which
properties we display for this format.
Discussion: https://postgr.es/m/CAApHDvo_dmNozQQTmN-2jGp1vT%3Ddxx7Q0vd%2BMvD1cGpv2HU%3DSg%40mail.gmail.com
Backpatch-through: 13, where the hashagg spilling code was added.
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/279428.1593373684@sss.pgh.pa.us
Since %c only passes a C "char" to printf, it's incapable of dealing
with multibyte characters. Passing just the first byte of such a
character leads to an output string that is visibly not correctly
encoded, resulting in undesirable behavior such as encoding conversion
failures while sending error messages to clients.
We've lived with this issue for a long time because it was inconvenient
to avoid in a portable fashion. However, now that we always use our own
snprintf code, it's reasonable to use the %.*s format to print just one
possibly-multibyte character in a string. (We previously avoided that
obvious-looking answer in order to work around glibc's bug #6530, cf
commits 54cd4f045 and ed437e2b2.)
Hence, run around and fix a bunch of places that used %c to report
a character found in a user-supplied string. For simplicity, I did
not touch places that were emitting non-user-facing debug messages,
or reporting catalog data that should always be ASCII. (It's also
unclear how useful this approach could be in frontend code, where
it's less certain that we know what encoding we're dealing with.)
In passing, improve a couple of poorly-written error messages in
pageinspect/heapfuncs.c.
This is a longstanding issue, but I'm hesitant to back-patch because
of the impact on translatable message strings. In any case this fix
would not work reliably before v12.
Tom Lane and Quan Zongliang
Discussion: https://postgr.es/m/a120087c-4c88-d9d4-1ec5-808d7a7f133d@gmail.com
SQL:1999 had syntax
SUBSTRING(text FROM pattern FOR escapechar)
but this was replaced in SQL:2003 by the more clear
SUBSTRING(text SIMILAR pattern ESCAPE escapechar)
but this was never implemented in PostgreSQL. This patch adds that
new syntax as an alternative in the parser, and updates documentation
and tests to indicate that this is the preferred alternative now.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/a15db31c-d0f8-8ce0-9039-578a31758adb%402ndquadrant.com
The logic used to build the set of dependencies needed for a type is
rather repetitive with direct assignments for each ObjectAddress field.
This refactors the code to use the macro ObjectAddressSet() instead, to
do the same work. There are more areas of the backend code that could
use this macro, but these are left for a follow-up patch that will
partially rework the way dependencies are recorded as well. Type
dependencies are left out of the follow-up patch, so they are refactored
separately here.
Extracted from a larger patch by the same author.
Author: Daniel Gustafsson
Discussion: https://potgr.es/m/20190213182737.mxn6hkdxwrzgxk35@alap3.anarazel.de
OpenSSL's native reports about problems related to protocol version
restrictions are pretty opaque and inconsistent. When we get an
SSL error that is plausibly due to this, emit a hint message that
includes the range of SSL protocol versions we (think we) are
allowing. This should at least get the user thinking in the right
direction to resolve the problem, even if the hint isn't totally
accurate, which it might not be for assorted reasons.
Back-patch to v13 where we increased the default minimum protocol
version, thereby increasing the risk of this class of failure.
Patch by me, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/a9408304-4381-a5af-d259-e55d349ae4ce@2ndquadrant.com
We failed to save slot to disk after invalidating it, so the state was
lost in case of server restart or crash. Fix by marking it dirty and
flushing.
Also, if the slot is known invalidated we don't need to reason about the
LSN at all -- it's known invalidated. Only test the LSN if the slot is
known not invalidated.
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/17a69cfe-f1c1-a416-ee25-ae15427c69eb@oss.nttdata.com
Commit 0d861bbb, which added deduplication to nbtree, had
_bt_check_unique() pass a TID to table_index_fetch_tuple_check() that
isn't safe to mutate. table_index_fetch_tuple_check()'s tid argument is
modified when the TID in question is not the latest visible tuple in a
hot chain, though this wasn't documented.
To fix, go back to using a local copy of the TID in _bt_check_unique(),
and update comments above table_index_fetch_tuple_check().
Backpatch: 13-, where B-Tree deduplication was introduced.
If restart_lsn of logical replication slot gets behind more than
max_slot_wal_keep_size from the current LSN, the logical replication slot
would be invalidated and its restart_lsn is reset to an invalid LSN.
If this logical replication slot with an invalid restart_lsn was specified as
the source slot in pg_copy_logical_replication_slot(), the function caused
the assertion failure unexpectedly.
This assertion was added because restart_lsn should not be invalid before.
But in v13, it can be invalid thanks to max_slot_wal_keep_size. So since this
assertion is no longer useful, this commit removes it.
This commit also changes the errcode in the error message that
pg_copy_logical_replication_slot() emits when the slot with an invalid
restart_lsn is specified, to more appropriate one.
Back-patch to v13 where max_slot_wal_keep_size was added and
the assertion was no longer valid.
Author: Fujii Masao
Reviewed-by: Alvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/f91de4fb-a7ab-b90e-8132-74796e049d51@oss.nttdata.com
In pg_replication_slot, change output from normal/reserved/lost to
reserved/extended/unreserved/ lost, which better expresses the possible
states particularly near the time where segments are no longer safe but
checkpoint has not run yet.
Under the new definition, reserved means the slot is consuming WAL
that's still under the normal WAL size constraints; extended means it's
consuming WAL that's being protected by wal_keep_segments or the slot
itself, whose size is below max_slot_wal_keep_size; unreserved means the
WAL is no longer safe, but checkpoint has not yet removed those files.
Such as slot is in imminent danger, but can still continue for a little
while and may catch up to the reserved WAL space.
Also, there were some bugs in the calculations used to report the
status; fixed those.
Backpatch to 13.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200616.120236.1809496990963386593.horikyota.ntt@gmail.com
The current definition is dangerous. No bugs exist in our code at
present, but backpatch to 11 nonetheless where it was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
The description of InsertPgAttributeTuple() does not match its handling
of pg_attribute contents with NULL values for a long time, with 911e702
making things more inconsistent. This adjusts the description to match
the reality.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/4E4E4B33-9FDF-4D21-B77A-642D027AEAD9@yesql.se
explain_get_index_name() applied quote_identifier() to the index name.
This is fine for text output, but the non-text output formats all have
their own quoting conventions and would much rather start from the
actual index name. For example in JSON you'd get something like
"Index Name": "\"My Index\"",
which is surely not desirable, especially when the same does not
happen for table names. Hence, move the responsibility for applying
quoting out to the callers, where it can go into already-existing
special code paths for text format.
This changes the API spec for users of explain_get_index_name_hook:
before, they were supposed to apply quote_identifier() if necessary,
now they should not. Research suggests that the only publicly
available user of the hook is hypopg, and it actually forgot to
apply quoting anyway, so it's fine. (In any case, there's no
behavioral change for the output of a hook as seen in non-text
EXPLAIN formats, so this won't break any case that programs should
be relying on.)
Digging in the commit logs, it appears that quoting was included in
explain_get_index_name's duties when commit 604ffd280 invented it;
and that was fine at the time because we only had text output format.
This should have been rethought when non-text formats were invented,
but it wasn't.
This is a fairly clear bug for users of non-text EXPLAIN formats,
so back-patch to all supported branches.
Per bug #16502 from Maciek Sakrejda. Patch by me (based on
investigation by Euler Taveira); thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/16502-57bd1c9f913ed1d1@postgresql.org
spg_mask() didn't take into account that pd_lower equal to SizeOfPageHeaderData
is still valid value. This commit fixes that. Backpatch to 11, where
spg_mask() pg_lower check was introduced.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/20200615131405.GM52676%40paquier.xyz
Backpatch-through: 11
The function has been reading global variable forceSyncCommit, mirroring
the intent of the caller that passed forceSync=forceSyncCommit. The
other caller, RecordTransactionCommitPrepared(), passed false. Since
COMMIT PREPARED can't share a transaction with any command, it certainly
doesn't share a transaction with a command that sets forceSyncCommit.
Reviewed by Michael Paquier.
Discussion: https://postgr.es/m/20200617032615.GC2916904@rfd.leadboat.com
It was possible for deduplication's single value strategy to mistakenly
believe that a very small duplicate tuple counts as one of the six large
tuples that it aims to leave behind after the page finally splits. This
could cause slightly suboptimal space utilization with very low
cardinality indexes, though only under fairly narrow conditions.
To fix, be particular about what kind of tuple counts as a
maxpostingsize-capped tuple. This avoids confusion in the event of a
small tuple that gets "wedged" between two large tuples, where all
tuples on the page are duplicates of the same value.
Discussion: https://postgr.es/m/CAH2-Wz=Y+sgSFc-O3LpiZX-POx2bC+okec2KafERHuzdVa7-rQ@mail.gmail.com
Backpatch: 13-, where deduplication was introduced (by commit 0d861bbb)
This commit fixes the following issues.
1. There is the case where the slot is dropped while trying to invalidate it.
InvalidateObsoleteReplicationSlots() did not handle this case, and
which could cause checkpoint to fail.
2. InvalidateObsoleteReplicationSlots() could emit the same log message
multiple times unnecessary. It should be logged only once.
3. When marking the slot as used, we always searched the target slot from
all the replication slots even if we already found it. This could cause
useless waste of cycles.
Back-patch to v13 where these issues were added as a part of
max_slot_wal_keep_size code.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://postgr.es/m/66c05b67-3396-042c-1b41-bfa6c3ddcf82@oss.nttdata.com
Since 1f39bce02, HashAgg nodes have had the ability to spill to disk when
memory consumption exceeds work_mem. That commit added new properties to
EXPLAIN ANALYZE to show the maximum memory usage and disk usage, however,
it didn't quite go as far as showing that information for parallel
workers. Since workers may have experienced something very different from
the main process, we should show this information per worker, as is done
in Sort.
Reviewed-by: Justin Pryzby
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/CAApHDvpEKbfZa18mM1TD7qV6PG+w97pwCWq5tVD0dX7e11gRJw@mail.gmail.com
Backpatch-through: 13, where the hashagg spilling code was added.
This was a danger only for --disable-spinlocks in combination with
atomic operations unsupported by the current platform.
While atomics.c was careful to signal that a separate semaphore ought
to be used when spinlock emulation is active, spin.c didn't actually
implement that mechanism. That's my (Andres') fault, it seems to have
gotten lost during the development of the atomic operations support.
Fix that issue and add test for nesting atomic operations inside a
spinlock.
Author: Andres Freund
Discussion: https://postgr.es/m/20200605023302.g6v3ydozy5txifji@alap3.anarazel.de
Backpatch: 9.5-
Advancing a replication slot did not recompute the oldest xmin and LSN
values across replication slots, preventing resource removal like
segments not recycled at checkpoint time. The original commit that
introduced the slot advancing in 9c7d06d never did the update of those
oldest values, and b0afdca removed this code.
This commit adds a TAP test to check segment recycling with advancing
for physical slots, enforcing an extra segment switch before advancing
to check if the segment gets correctly recycled after a checkpoint.
Reported-by: Andres Freund
Reviewed-by: Alexey Kondratov, Kyptaro Horiguchi
Discussion: https://postgr.es/m/20200609171904.kpltxxvjzislidks@alap3.anarazel.de
Backpatch-through: 11
On platforms without support for 64bit atomic operations where we also
cannot rely on 64bit reads to have single copy atomicity, such atomics
are implemented using a spinlock based fallback. That means it's not
safe to even read such atomics from within a signal handler (since the
signal handler might run when the spinlock already is held).
To avoid this issue defer global barrier processing out of the signal
handler. Instead of checking local / shared barrier generation to
determine whether to set ProcSignalBarrierPending, introduce
PROCSIGNAL_BARRIER and always set ProcSignalBarrierPending when
receiving such a signal. Additionally avoid redundant work in
ProcessProcSignalBarrier if ProcSignalBarrierPending is unnecessarily.
Also do a small amount of other polishing.
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20200609193723.eu5ilsjxwdpyxhgz@alap3.anarazel.de
Backpatch: 13-, where the code was introduced.
Don't use fread(), since that doesn't necessarily set errno. We could
use read() instead, but it's even better to use pg_pread(), which
allows us to avoid some extra calls to seek to the desired location in
the file.
Also, advertise a wait event while reading from a file, as we do for
most other places where we're reading data from files.
Patch by me, reviewed by Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmobBw-3573vMosGj06r72ajHsYeKtksT_oTxH8XvTL7DxA@mail.gmail.com
Merge two calls to sendDir() that are exactly the same except for
the fifth argument. Adjust comments to match.
Also, don't bother checking whether tblspc_map_file is NULL. We
initialize it in all cases, so it can't be.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
Commit 72d422a522 made xlog.c call
sendTablespace() with the 'sizeonly' argument set to true, which
required basebackup.c to export sendTablespace(). However, that's
kind of ugly, so instead defer the call to sendTablespace() until
basebackup.c regains control. That way, it can still be a static
function.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
I failed to notice that we don't really need to check for y being an
integer in the code path where x = -inf; we already did.
Also make some further cosmetic rearrangements in that spot in hopes
of dodging the seeming compiler bug that buildfarm member fossa is
hitting. And be consistent about declaring variables as "float8"
not "double", since the pre-existing variables in this function are
like that.
Discussion: https://postgr.es/m/E1jkyFX-0005RR-1Q@gemulon.postgresql.org
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
Buildfarm results for commit e532b1d57 reveal the error in my thinking
about the unexpected-EDOM case. I'd supposed this was no longer really
a live issue, but it seems the fix for glibc's bug #3866 is not all that
old, and we still have at least one buildfarm animal (lapwing) with the
bug. Hence, resurrect essentially the previous logic (but, I hope, less
opaquely presented), and explain what it is we're really doing here.
Also, blindly try to fix fossa's failure by tweaking the logic that
figures out whether y is an odd integer when x is -inf. This smells
a whole lot like a compiler bug, but I lack access to icc to try to
pin it down. Maybe doing division instead of multiplication will
dodge the issue.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Introduce TAR_BLOCK_SIZE and replace many instances of 512 with
the new constant. Introduce function tarPaddingBytesRequired
and use it to replace numerous repetitions of (x + 511) & ~511.
Add preprocessor guards against multiple inclusion to pgtar.h.
Reformat the prototype for tarCreateHeader so it doesn't extend
beyond 80 characters.
Discussion: http://postgr.es/m/CA+TgmobWbfReO9-XFk8urR1K4wTNwqoHx_v56t7=T8KaiEoKNw@mail.gmail.com
Buildfarm results for commit decbe2bfb show that AIX and illumos
have non-POSIX-compliant pow() functions, as do ancient NetBSD
and HPUX releases. While it's dubious how much we should care
about the latter two platforms, the former two are probably enough
reason to put in manual handling of infinite-input cases. Hence,
do so, and clean up the post-pow() error handling to reflect its
now-more-limited scope. (Notably, while we no longer expect to
ever see EDOM from pow(), report it as a domain error if we do.
The former coding had the net effect of expensively converting the
error to ERANGE, which seems highly questionable: if pow() wanted
to report ERANGE, it would have done so.)
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/E1jkU7H-00024V-NZ@gemulon.postgresql.org
Previously, these functions tended to throw underflow errors for
negative-infinity exponents. The correct thing per POSIX is to
return 0, so let's do that instead. (Note that the SQL standard
is silent on such issues, as it lacks the concepts of either Inf
or NaN; so our practice is to follow POSIX whenever a corresponding
C-library function exists.)
Also, add a bunch of test cases verifying that exp() and power()
actually do follow POSIX for Inf and NaN inputs. While this patch
should guarantee that exp() passes the tests, power() will not unless
the platform's pow(3) is fully POSIX-compliant. I already know that
gaur fails some of the tests, and I am suspicious that the Windows
animals will too; the extent of compliance of other old platforms
remains to be seen. We might choose to drop failing test cases, or
to work harder at overriding pow(3) for these cases, but first let's
see just how good or bad the situation is.
Discussion: https://postgr.es/m/582552.1591917752@sss.pgh.pa.us
This patch removes the hardcoded check for superuser privileges when
executing replication origin functions. Instead, execution is revoked
from public, meaning that those functions can be executed by a superuser
and that access to them can be granted.
Author: Martín Marqués
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Masahiko Sawada
Discussion: https:/postgr.es/m/CAPdiE1xJMZOKQL3dgHMUrPqysZkgwzSMXETfKkHYnBAB7-0VRQ@mail.gmail.com
var_samp(numeric) and stddev_samp(numeric) disagreed with their float
cousins about what to do for a single non-null input value that is NaN.
The float versions return NULL on the grounds that the calculation is
only defined for more than one non-null input, which seems like the
right answer. But the numeric versions returned NaN, as a result of
dealing with edge cases in the wrong order. Fix that. The patch
also gets rid of an insignificant memory leak in such cases.
This inconsistency is of long standing, but on the whole it seems best
not to back-patch the change into stable branches; nobody's complained
and it's such an obscure point that nobody's likely to complain.
(Note that v13 and v12 now contain test cases that will notice if we
accidentally back-patch this behavior change in future.)
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
When there is just one non-null input value, and it is infinity or NaN,
aggregates such as stddev_pop and covar_pop should produce a NaN
result, because the calculation is not well-defined. They used to do
so, but since we adopted Youngs-Cramer aggregation in commit e954a727f,
they produced zero instead. That's an oversight, so fix it. Add tests
exercising these edge cases.
Affected aggregates are
var_pop(double precision)
stddev_pop(double precision)
var_pop(real)
stddev_pop(real)
regr_sxx(double precision,double precision)
regr_syy(double precision,double precision)
regr_sxy(double precision,double precision)
regr_r2(double precision,double precision)
regr_slope(double precision,double precision)
regr_intercept(double precision,double precision)
covar_pop(double precision,double precision)
corr(double precision,double precision)
Back-patch to v12 where the behavior change was accidentally introduced.
Report and patch by me; thanks to Dean Rasheed for review.
Discussion: https://postgr.es/m/353062.1591898766@sss.pgh.pa.us
Unify the grammar of COMMENT, DROP, and SECURITY LABEL further. They
all effectively just take an object address for later processing, so
we can make the grammar more generalized. Some extra checking about
which object types are supported can be done later in the statement
execution.
Discussion: https://www.postgresql.org/message-id/flat/163c00a5-f634-ca52-fc7c-0e53deda8735%402ndquadrant.com
Core by no means makes excessive use of these functions, but quite a large
number of those usages do require the caller to call strlen() on the
returned string. This is quite wasteful since these functions do already
have a good idea of the length of the string, so we might as well just
have them return that.
Reviewed-by: Andrew Gierth
Discussion: https://postgr.es/m/CAApHDvrm2A5x2uHYxsqriO2cUaGcFvND%2BksC9e7Tjep0t2RK_A%40mail.gmail.com
In passing, also remove a few surplus empty lines from pg_ltoa and
pg_ulltoa_n in numutils.c
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87y2ou3xuh.fsf@news-spur.riddles.org.uk
Backpatch-through: 13, where these changes were introduced
plpgsql has always executed the query given in a RETURN QUERY command
by opening it as a cursor and then fetching a few rows at a time,
which it turns around and dumps into the function's result tuplestore.
The point of this was to keep from blowing out memory with an oversized
SPITupleTable result (note that while a tuplestore can spill tuples
to disk, SPITupleTable cannot). However, it's rather inefficient, both
because of extra data copying and because of executor entry/exit
overhead. In recent versions, a new performance problem has emerged:
use of a cursor prevents use of a parallel plan for the executed query.
We can improve matters by skipping use of a cursor and having the
executor push result tuples directly into the function's result
tuplestore. However, a moderate amount of new infrastructure is needed
to make that idea work:
* We can use the existing tstoreReceiver.c DestReceiver code to funnel
executor output to the tuplestore, but it has to be extended to support
plpgsql's requirement for possibly applying a tuple conversion map.
* SPI needs to be extended to allow use of a caller-supplied
DestReceiver instead of its usual receiver that puts tuples into
a SPITupleTable. Two new API calls are needed to handle both the
RETURN QUERY and RETURN QUERY EXECUTE cases.
I also felt that I didn't want these new API calls to use the legacy
method of specifying query parameter values with "char" null flags
(the old ' '/'n' convention); rather they should accept ParamListInfo
objects containing the parameter type and value info. This required
a bit of additional new infrastructure since we didn't yet have any
parse analysis callback that would interpret $N parameter symbols
according to type data supplied in a ParamListInfo. There seems to be
no harm in letting makeParamList install that callback by default,
rather than leaving a new ParamListInfo's parserSetup hook as NULL.
(Indeed, as of HEAD, I couldn't find anyplace that was using the
parserSetup field at all; plpgsql was using parserSetupArg for its
own purposes, but parserSetup seemed to be write-only.)
We can actually get plpgsql out of the business of using legacy null
flags altogether, and using ParamListInfo instead of its ad-hoc
PreparedParamsData structure; but this requires inventing one more
SPI API call that can replace SPI_cursor_open_with_args. That seems
worth doing, though.
SPI_execute_with_args and SPI_cursor_open_with_args are now unused
anywhere in the core PG distribution. Perhaps someday we could
deprecate/remove them. But cleaning up the crufty bits of the SPI
API is a task for a different patch.
Per bug #16040 from Jeremy Smith. This is unfortunately too invasive to
consider back-patching. Patch by me; thanks to Hamid Akhtar for review.
Discussion: https://postgr.es/m/16040-eaacad11fecfb198@postgresql.org
Rewrite the documentation of these functions, in light of recent bug fix
commit 5940ffb2.
Back-patch to 13 where the check-for-conflict-out code was split up into
AM-specific and generic parts, and new documentation was added that now
looked wrong.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
When merging two NumericAggStates, the code missed adding the new
state's NaNcount unless its N was also nonzero; since those counts
are independent, this is wrong.
This would only have visible effect if some partial aggregate scans
found only NaNs while earlier ones found only non-NaNs; then we could
end up falsely deciding that there were no NaNs and fail to return a
NaN final result as expected. That's pretty improbable, so it's no
surprise this hasn't been reported from the field. Still, it's a bug.
I didn't try to produce a regression test that would show the bug,
but I did notice that these functions weren't being reached at all
in our regression tests, so I improved the tests to at least
exercise them. With these additions, I see pretty complete code
coverage on the aggregation-related functions in numeric.c.
Back-patch to 9.6 where this code was introduced. (I only added
the improved test case as far back as v10, though, since the
relevant part of aggregates.sql isn't there at all in 9.6.)
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
access_method, database_name, and index_name are all just name, and
they are not used consistently for their alleged purpose, so remove
them. They have been around since ancient times but have no current
reason for existing. Removing them can simplify future grammar
refactoring.
Discussion: https://www.postgresql.org/message-id/flat/163c00a5-f634-ca52-fc7c-0e53deda8735%402ndquadrant.com
The previous description string still described the pre-PostgreSQL
10 (pre eb61136dc7) behavior of
selecting between encrypted and unencrypted, but it is now choosing
between encryption algorithms.
Commit cec2edfa78 introduced logical_decoding_work_mem to limit
ReorderBuffer memory usage. We spill the changes once the memory occupied
by changes exceeds logical_decoding_work_mem. There was an assumption
in the code that by evicting the largest (sub)transaction we will come
under the memory limit as the selected transaction will be at least as
large as the most recent change (which caused us to go over the memory
limit). However, that is not true because a user can reduce the
logical_decoding_work_mem to a smaller value before the most recent
change.
We fix it by allowing to evict the transactions until we reach under the
memory limit.
Reported-by: Fujii Masao
Author: Amit Kapila
Reviewed-by: Fujii Masao
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/2b7ba291-22e0-a187-d167-9e5309a3458d@oss.nttdata.com
There are a number of Remove${Something}ById() functions that are
essentially identical in structure and only different in which catalog
they are working on. Refactor this to be one generic function. The
information about which oid column, index, etc. to use was already
available in ObjectProperty for most catalogs, in a few cases it was
easily added.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/331d9661-1743-857f-1cbb-d5728bcd62cb%402ndquadrant.com
The redo routines for XLOG_CHECKPOINT_{ONLINE,SHUTDOWN} must acquire
ControlFileLock before modifying ControlFile->checkPointCopy, or the
checkpointer could write out a control file with a bad checksum.
Likewise, XLogReportParameters() must acquire ControlFileLock before
modifying ControlFile and calling UpdateControlFile().
Back-patch to all supported releases.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/70BF24D6-DC51-443F-B55A-95735803842A%40amazon.com
Since database connections can be used with WAL senders in 9.4, it is
possible to use physical replication. This commit fixes a crash when
starting physical replication with a WAL sender using a database
connection, caused by the refactoring done in 850196b.
There have been discussions about forbidding the use of physical
replication in a database connection, but this is left for later,
taking care only of the crash new to 13.
While on it, add a test to check for a failure when attempting logical
replication if the WAL sender does not have a database connection. This
part is extracted from a larger patch by Kyotaro Horiguchi.
Reported-by: Vladimir Sitnikov
Author: Michael Paquier, Kyotaro Horiguchi
Reviewed-by: Kyotaro Horiguchi, Álvaro Herrera
Discussion: https://postgr.es/m/CAB=Je-GOWMj1PTPkeUhjqQp-4W3=nW-pXe2Hjax6rJFffB5_Aw@mail.gmail.com
Backpatch-through: 13
Commit 24d85952 made a change that indirectly caused a performance
regression by triggering a change in the way GCC optimizes memcpy() on
some platforms.
The behavior seemed to contradict a GCC document, so I filed a report:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95556
This patch implements a narrow workaround which eliminates the
regression I observed. The workaround is benign enough that it seems
unlikely to cause a different regression on another platform.
Discussion: https://postgr.es/m/99b2eab335c1592c925d8143979c8e9e81e1575f.camel@j-davis.com
ineq_histogram_selectivity() can be invoked in situations where the
ordering we care about is not that of the column's histogram. We could
be considering some other collation, or even more drastically, the
query operator might not agree at all with what was used to construct
the histogram. (We'll get here for anything using scalarineqsel-based
estimators, so that's quite likely to happen for extension operators.)
Up to now we just ignored this issue and assumed we were dealing with
an operator/collation whose sort order exactly matches the histogram,
possibly resulting in junk estimates if the binary search gets confused.
It's past time to improve that, since the use of nondefault collations
is increasing. What we can do is verify that the given operator and
collation match what's recorded in pg_statistic, and use the existing
code only if so. When they don't match, instead execute the operator
against each histogram entry, and take the fraction of successes as our
selectivity estimate. This gives an estimate that is probably good to
about 1/histogram_size, with no assumptions about ordering. (The quality
of the estimate is likely to degrade near the ends of the value range,
since the two orderings probably don't agree on what is an extremal value;
but this is surely going to be more reliable than what we did before.)
At some point we might further improve matters by storing more than one
histogram calculated according to different orderings. But this code
would still be good fallback logic when no matches exist, so that is
not an argument for not doing this.
While here, also improve get_variable_range() to deal more honestly
with non-default collations.
This isn't back-patchable, because it requires adding another argument
to ineq_histogram_selectivity, and because it might have significant
impact on the estimation results for extension operators relying on
scalarineqsel --- mostly for the better, one hopes, but in any case
destabilizing plan choices in back branches is best avoided.
Per investigation of a report from James Lucas.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
If the flag value is lost, logical decoding would work the same way as
REPLICA IDENTITY NOTHING, meaning that no old tuple values would be
included in the changes anymore produced by logical decoding.
Author: Michael Paquier
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/20200603065340.GK89559@paquier.xyz
Backpatch-through: 12
It's intentional that we don't allow values greater than 24 hours,
while we do allow "24:00:00" as well as "23:59:60" as inputs.
However, the range check was miscoded in such a way that it would
accept "23:59:60.nnn" with a nonzero fraction. For time or timetz,
the stored result would then be greater than "24:00:00" which would
fail dump/reload, not to mention possibly confusing other operations.
Fix by explicitly calculating the result and making sure it does not
exceed 24 hours. (This calculation is redundant with what will happen
later in tm2time or tm2timetz. Maybe someday somebody will find that
annoying enough to justify refactoring to avoid the duplication; but
that seems too invasive for a back-patched bug fix, and the cost is
probably unmeasurable anyway.)
Note that this change also rejects such input as the time portion
of a timestamp(tz) value.
Back-patch to v10. The bug is far older, but to change this pre-v10
we'd need to ensure that the logic behaves sanely with float timestamps,
which is possibly nontrivial due to roundoff considerations.
Doesn't really seem worth troubling with.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/20200520125807.GB296739@msg.df7cb.de
Fix some more violations of the "only straight-line code inside a
spinlock" rule. These are hazardous not only because they risk
holding the lock for an excessively long time, but because it's
possible for palloc to throw elog(ERROR), leaving a stuck spinlock
behind.
copy_replication_slot() had two separate places that did pallocs
while holding a spinlock. We can make the code simpler and safer
by copying the whole ReplicationSlot struct into a local variable
while holding the spinlock, and then referencing that copy.
(While that's arguably more cycles than we really need to spend
holding the lock, the struct isn't all that big, and this way seems
far more maintainable than copying fields piecemeal. Anyway this
is surely much cheaper than a palloc.) That bug goes back to v12.
InvalidateObsoleteReplicationSlots() not only did a palloc while
holding a spinlock, but for extra sloppiness then leaked the memory
--- probably for the lifetime of the checkpointer process, though
I didn't try to verify that. Fortunately that silliness is new
in HEAD.
pg_get_replication_slots() had a cosmetic violation of the rule,
in that it only assumed it's safe to call namecpy() while holding
a spinlock. Still, that's a hazard waiting to bite somebody, and
there were some other cosmetic coding-rule violations in the same
function, so clean it up. I back-patched this as far as v10; the
code exists before that but it looks different, and this didn't
seem important enough to adapt the patch further back.
Discussion: https://postgr.es/m/20200602.161518.1399689010416646074.horikyota.ntt@gmail.com
Previously UpdateSpillStats() called elog(DEBUG2) while holding
the spinlock even though the local variables that the elog() accesses
don't need to be protected by the lock. Since spinlocks are intended
for very short-term locks, they should not be used when calling
elog(DEBUG2). So this commit moves that elog() out of spinlock period.
Author: Kyotaro Horiguchi
Reviewed-by: Amit Kapila and Fujii Masao
Discussion: https://postgr.es/m/20200602.161518.1399689010416646074.horikyota.ntt@gmail.com
This issue has been present since the introduction of this code as of
a3519a2 from 2002, and has been found by buildfarm member prion that
uses RELCACHE_FORCE_RELEASE via the tests introduced recently in
e786be5.
Discussion: https://postgr.es/m/20200601022055.GB4121@paquier.xyz
Backpatch-through: 9.5
A relation that has no storage initializes rd_tableam to NULL, which
caused those two functions to crash because of a pointer dereference.
Note that in 11 and older versions, this has always failed with a
confusing error "could not open file".
These two functions are used by the Postgres ODBC driver, which requires
them only when connecting to a backend strictly older than 8.1. When
connected to 8.2 or a newer version, the driver uses a RETURNING clause
instead whose support has been added in 8.2, so it should be possible to
just remove both functions in the future. This is left as an issue to
address later.
While on it, add more regression tests for those functions as we never
really had coverage for them, and for aggregates of TIDs.
Reported-by: Jaime Casanova, via sqlsmith
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAJGNTeO93u-5APMga6WH41eTZ3Uee9f3s8dCpA-GSSqNs1b=Ug@mail.gmail.com
Backpatch-through: 12
Commit 1f39bce021 added disk-based hash aggregation, which may spill
incoming tuples to disk. It however did not request projection to make
the tuples as narrow as possible, which may mean having to spill much
more data than necessary (increasing I/O, pushing other stuff from page
cache, etc.).
This adds CP_SMALL_TLIST in places that may use hash aggregation - we do
that only for AGG_HASHED. It's unnecessary for AGG_SORTED, because that
either uses explicit Sort (which already does projection) or pre-sorted
input (which does not need spilling to disk).
Author: Tomas Vondra
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20200519151202.u2p2gpiawoaznsv2%40development
The repeat() function loops for potentially a long time without
ever checking for interrupts. This prevents, for example, a query
cancel from interrupting until the work is all done. Fix by
inserting a CHECK_FOR_INTERRUPTS() into the loop.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/flat/8692553c-7fe8-17d9-cbc1-7cddb758f4c6%40joeconway.com
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE was used in an ereport with the
same message but different errdetail a few lines earlier, so use that
here as well.
Backpatch-through: 11
Disk-based HashAgg relies on writing to multiple tapes
concurrently. Avoid fragmentation of the tapes' blocks by
preallocating many blocks for a tape at once. No file operations are
performed during preallocation; only the block numbers are reserved.
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200519151202.u2p2gpiawoaznsv2%40development
These were missed when these were added to pg_hba.conf in PG 12;
updates docs and pg_hba.conf.sample.
Reported-by: Arthur Nascimento
Bug: 16380
Discussion: https://postgr.es/m/20200421182736.GG19613@momjian.us
Backpatch-through: 12
The following commands have been missing calls to object access hooks
InvokeObjectPost{Create|Alter}Hook normally applied to all commands:
- ALTER RULE RENAME TO
- ALTER USER MAPPING
- CREATE ACCESS METHOD
- CREATE STATISTICS
Thanks also to Robert Haas for the discussion.
Author: Mark Dilger
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/435CD295-F409-44E0-91EC-DF32C7AFCD76@enterprisedb.com
The previous indentation of optimizer functions was unclear; adjust the
indentation dashes so that a deeper level of indentation indicates that
the outer optimizer function calls the inner one.
Author: Richard Guo, with additional change by me
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAMbWs4-U-ogzpchGsP2BBMufCss1hktm%2B%2BeTJK_dUC196pw0cQ%40mail.gmail.com
This should be plain old ColId. Making it so makes the grammar less
complicated, and makes the compiled tables a kilobyte or so smaller
(likely because they don't have to deal with a keyword classification
that's not used anyplace else).
Commit 624686abcf added an assertion that verified that _bt_search
successfully relocated the leaf page undergoing deletion. Page deletion
cannot deal with the case where the descent stack is to the right of the
page, so this seemed critical (deletion can only handle the case where
the descent stack is to the left of the leaf/target page). However, the
assertion went a bit too far.
Since only a buffer pin is held on the leaf page throughout the call to
_bt_search, nothing guarantees that it can't have split during this
small window. And if does actually split, _bt_search may end up
"relocating" a page to the right of the original target leaf page. This
scenario seems extremely unlikely, but it must still be considered.
Remove the assertion, and document how we cope in this scenario.
Synchronize the event names for parallel hash join waits with other
event names, by getting rid of the slashes and dropping "-ing"
suffixes. Rename ClogGroupUpdate to XactGroupUpdate, to match the
new SLRU name. Move the ProcSignalBarrier event to the IPC category;
it doesn't belong under IO.
Also a bit more wordsmithing in the wait event documentation tables.
Discussion: https://postgr.es/m/4505.1589640417@sss.pgh.pa.us
d140f2f3 has renamed receivedUpto to flushedUpto, and has added
writtenUpto to the WAL receiver's shared memory information, but
pg_stat_wal_receiver was not consistent with that. This commit renames
received_lsn to flushed_lsn, and adds a new column called written_lsn.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20200515090817.GA212736@paquier.xyz
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
In a logical replication subscriber, a table using REPLICA IDENTITY FULL
which has a primary key would try to use the primary key's index
available to scan for a tuple, but an assertion only assumed as correct
the case of an index associated to REPLICA IDENTITY USING INDEX. This
commit corrects the assertion so as the use of a primary key index is a
valid case.
Reported-by: Dilip Kumar
Analyzed-by: Dilip Kumar
Author: Euler Taveira
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/CAFiTN-u64S5bUiPL1q5kwpHNd0hRnf1OE-bzxNiOs5zo84i51w@mail.gmail.com
Backpatch-through: 10
It's just weird that this name wasn't chosen to look like an
identifier. The suspicion that it wasn't thought about too
hard is reinforced by the fact that it wasn't documented in
the pg_locks view (until I did so, a day or two back).
Update, and add a comment reminding future adjusters of this
array to fix the docs too.
Do some desultory wordsmithing on various entries in the wait
events tables.
Discussion: https://postgr.es/m/24595.1589326879@sss.pgh.pa.us
In commit 850196b610 I (Álvaro) failed to handle the case of walsender
shutting down on an error before setting up its 'xlogreader' pointer;
the error handling code dereferences the pointer, causing a crash.
Fix by testing the pointer before trying to dereference it.
Kyotaro authored the code fix; I adopted Nathan's test case to be used
by the TAP tests and added the necessary PostgresNode change.
Reported-by: Nathan Bossart <bossartn@amazon.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/C04FC24E-903D-4423-B312-6910E4D846E5@amazon.com
This was mostly confusing, especially since some wait events in
this class had the suffix and some did not.
While at it, stop exposing MainLWLockNames[] as a globally visible
name; any code using that directly is almost certainly wrong, as
its name has been misleading for some time.
(GetLWLockIdentifier() is what to use instead.)
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
The previous coding zeroed out offsetof(ReplicationStateCtl, states)
more bytes than it was entitled to, as a consequence of starting the
zeroing from the wrong pointer (or, if you prefer, using the wrong
calculation of how much to zero).
It's unsurprising that this has not caused any reported problems,
since it can be expected that the newly-allocated block is at the end
of what we've used in shared memory, and we always make the shmem
block substantially bigger than minimally necessary. Nonetheless,
this is wrong and it could bite us someday; plus it's a dangerous
model for somebody to copy.
This dates back to the introduction of this code (commit 5aa235042),
so back-patch to all supported branches.
Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
_bt_killitems marks btree items dead when a scan leaves the page where
they live, but it does so with only share lock (to improve concurrency).
This was historicall okay, since killing a dead item has no
consequences. However, with the advent of data checksums and
wal_log_hints, this action incurs a WAL full-page-image record of the
page. Multiple concurrent processes would write the same page several
times, leading to WAL bloat. The probability of this happening can be
reduced by only killing items if they're not already dead, so change the
code to do that.
The problem could eliminated completely by having _bt_killitems upgrade
to exclusive lock upon seeing a killable item, but that would reduce
concurrency so it's considered a cure worse than the disease.
Backpatch all the way back to 9.5, since wal_log_hints was introduced in
9.4.
Author: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://postgr.es/m/CA+fd4k6PeRj2CkzapWNrERkja5G0-6D-YQiKfbukJV+qZGFZ_Q@mail.gmail.com
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
COPY TO released the ACCESS SHARE lock immediately when it was done rather
than holding on to it until the end of the transaction.
This breaks the case where a REPEATABLE READ transaction could see an
empty table if it repeats a COPY statement and somebody truncated the
table in the meantime.
Before 4dded12faa the lock was also released after COPY FROM, but the
commit failed to notice the irregularity in COPY TO.
This is old behavior but doesn't seem important enough to backpatch.
Author: Laurenz Albe, based on suggestion by Robert Haas and Tom Lane
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/7bcfc39d4176faf85ab317d0c26786953646a411.camel@cybertec.at
The reasons why event triggers are disabled in standalone mode are
documented in the code path of ddl_command_start, and other places
checking if standalone mode is enabled or not mention to refer to the
comment for ddl_command_start, except for table_rewrite that duplicated
the same explanation.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwYqHtXpvr2mBJRwH9f+Y5y1GXw3rhbaAu0Dk2MoNevsmA@mail.gmail.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
There is little point in using the LWLockRegisterTranche mechanism for
built-in tranche names. It wastes cycles, it creates opportunities for
bugs (since failing to register a tranche name is a very hard-to-detect
problem), and the lack of any centralized list of names encourages
sloppy nonconformity in name choices. Moreover, since we have a
centralized list of the tranches anyway in enum BuiltinTrancheIds, we're
certainly not buying any flexibility in return for these disadvantages.
Hence, nuke all the backend-internal LWLockRegisterTranche calls,
and instead provide a const array of the builtin tranche names.
(I have in mind to change a bunch of these names shortly, but this
patch is just about getting them into one place.)
Discussion: https://postgr.es/m/9056.1589419765@sss.pgh.pa.us
Commit 3eb77eba5a moved the loop and refactored it, and inadvertently
changed the effect of fsync=off so that it also skipped removing entries
from the pendingOps table. That was not intentional, and leads to an
assertion failure if you turn fsync on while the server is running and
reload the config.
Backpatch-through: 12-
Reviewed-By: Thomas Munro
Discussion: https://www.postgresql.org/message-id/3cbc7f4b-a5fa-56e9-9591-c886deb07513%40iki.fi
Visual Studio 2015 and later versions should still be able to do the same
as Visual Studio 2012, but the declaration of locale_name is missing in
_locale_t, causing the code compilation to fail, hence this falls back
instead on to enumerating all system locales by using EnumSystemLocalesEx
to find the required locale name. If the input argument is in Unix-style
then we can get ISO Locale name directly by using GetLocaleInfoEx() with
LCType as LOCALE_SNAME.
In passing, change the documentation references of the now obsolete links.
Note that this problem occurs only with NLS enabled builds.
Author: Juan José Santamaría Flecha, Davinder Singh and Amit Kapila
Reviewed-by: Ranier Vilela and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAHzhFSFoJEWezR96um4-rg5W6m2Rj9Ud2CNZvV4NWc9tXV7aXQ@mail.gmail.com
Previously, AsyncShmemInit forcibly initialized the first page of the
async SLRU, to save dealing with that case in asyncQueueAddEntries.
But this is a poor tradeoff, since many installations do not ever use
NOTIFY; for them, expending those cycles in AsyncShmemInit is a
complete waste. Besides, this only saves a couple of instructions
in asyncQueueAddEntries, which hardly seems likely to be measurable.
The real reason to change this now, though, is that now that we track
SLRU access stats, the existing code is causing the postmaster to
accumulate some access counts, which then get inherited into child
processes by fork(), messing up the statistics. Delaying the
initialization into the first child that does a NOTIFY fixes that.
Hence, we can revert f3d23d83e, which was an incorrect attempt at
fixing that issue. Also, add an Assert to pgstat.c that should
catch any future errors of the same sort.
Discussion: https://postgr.es/m/8367.1589391884@sss.pgh.pa.us
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Instead of re-identifying which statistics bucket to use for a given
SLRU on every counter increment, do it once during shmem initialization.
This saves a fair number of cycles, and there's no real cost because
we could not have a bucket assignment that varies over time or across
backends anyway.
Also, get rid of the ill-considered decision to let pgstat.c pry
directly into SLRU's shared state; it's cleaner just to have slru.c
pass the stats bucket number.
In consequence of these changes, there's no longer any need to store
an SLRU's LWLock tranche info in shared memory, so get rid of that,
making this a net reduction in shmem consumption. (That partly
reverts fe702a7b3.)
This is basically code review for 28cac71bd, so I also cleaned up
some comments, removed a dangling extern declaration, fixed some
things that should be static and/or const, etc.
Discussion: https://postgr.es/m/3618.1589313035@sss.pgh.pa.us
* Have both physical and logical walsender share a 'xlogreader' state
struct for tracking state. This replaces the existing globals sendSeg
and sendCxt.
* Change WALRead not to receive XLogReaderState->seg and ->segcxt as
separate arguments anymore; just use the ones from 'state'. This is
made possible by the above change.
* have the XLogReader segment_open contract require the callbacks to
install the file descriptor in the state struct themselves instead of
returning it. xlogreader was already ignoring any possible failed
return from the callbacks, relying solely on them never returning.
(This point is not altogether excellent, as it means the callbacks
have to know more of XLogReaderState; but to really improve on that
we would have to pass back error info from the callbacks to
xlogreader. And the complexity would not be saved but instead just
transferred to the callers of WALRead, which would have to learn how
to throw errors from the open_segment callback in addition of, as
currently, from pg_pread.)
* segment_open no longer receives the 'segcxt' as a separate argument,
since it's part of the XLogReaderState argument.
Per comments from Kyotaro Horiguchi.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200511203336.GA9913@alvherre.pgsql
This commit changes pg_stat_get_slru() so that it uses
TimestampTzGetDatum() for stats_reset field because that field
stores the timestamp with time zone value. Previously
Int64GetDatum() was used.
Author: Fujii Masao
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/b8784fe6-1401-ab35-aa14-d57b5bb8e312@oss.nttdata.com
Previously since SLRUStats was not initialized, SLRU stats counters
could begin with non-zero value. Which could lead to incorrect results
in pg_stat_slru view.
Author: Fujii Masao
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/976bbb73-a112-de3c-c488-b34b64609793@oss.nttdata.com
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
The explain format used by incremental sort was somewhat inconsistent
with other nodes, making it harder to parse and understand. This commit
addresses that by
- adding an extra space to better separate groups of values
- using colons instead of equal signs to separate key/value
- properly capitalizing first letter of a key
- using separate lines for full and pre-sorted groups
These changes were proposed by Justin Pryzby and mostly copy the final
explain format used to report WAL usage.
Author: Justin Pryzby
Reviewed-by: James Coleman
Discussion: https://postgr.es/m/20200419023625.GP26953@telsasoft.com
The existing callers of XLogReadDetermineTimeline() performing recovery
need to check a replay LSN position when determining on which timeline
to read a WAL page. A portion of the comment describing this function
said exactly that, while referring to a routine for fetching a write
LSN, something not available in recovery.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200511.101619.2043820539323292957.horikyota.ntt@gmail.com
Restructure the function that locates the root of the to-be-deleted
subtree during nbtree page deletion. Handle the conditions that make
page deletion unsafe in a slightly more uniform way, and acknowledge the
fact that the behavior with incomplete splits on internal pages is
different (as pointed out in the nbtree README as of commit 35bc0ec7).
Also invent new terminology that avoids ambiguity around which pages are
about to be deleted. Consistently use the term "to-be-deleted subtree",
not the ambiguous term "branch".
We were calling the subtree parent page the "top parent page", but that
was quite misleading. The top parent page usually refers to a page
unlinked from its siblings and marked deleted (during the second stage
of page deletion). There was one kind of top parent page that we merely
removed a downlink from, and another kind of top parent page that we
actually marked deleted. Eliminate the ambiguity by inventing a new
term ("subtree parent page") that refers to the former kind of page
only.
The one in xlogreader.h was pointed out by Antonin Houska; I (Álvaro) noticed the
others by grepping.
Author: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/28250.1589186654@antos
Incremental sort always processes at least one full group group before
switching to prefix groups, so it's enough to check just the number of
full groups. There was no risk of division by zero due to the extra
condition, but it made the code harder to understand.
Reported-by: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAp+7qoS92-4V1vLChpdY3vEkLCbf+gye6P-4cirE-0z0A@mail.gmail.com
ExecReScanIncrementalSort was resetting bounded=false, which means the
optimization would be disabled on all rescans. This happens because
ExecSetTupleBound is called before the rescan, not after it.
Author: James Coleman
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200414065336.GI1492@paquier.xyz
The executor flags were not handled entirely correctly, although the
bugs were mostly harmless and it was mostly comment inaccuracy. We don't
need to strip any of the flags for child nodes.
Incremental sort does not support backward scans of mark/restore, so
MARK/BACKWARDS flags should not be possible. So we simply ensure this
using an assert, and we don't bother removing them when initializing
the child node.
With REWIND it's a bit less clear - incremental sort does not support
REWIND, but there is no way to signal this - it's legal to just ignore
the flag. We however continue passing the flag to child nodes, because
they might be useful to leverage that.
Reported-by: Michael Paquier
Author: James Coleman
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200414065336.GI1492@paquier.xyz
Code review for 0dc8ead463, prompted by a bug closed by 91c40548d5.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
TimelineHistoryRead and TimelineHistoryWrite wait events are reported
during waiting for a read and write of a timeline history file, respectively.
However, previously, TimelineHistoryRead wait event was not reported
while readTimeLineHistory() was reading a timeline history file. Also
TimelineHistoryWrite was not reported while writeTimeLineHistory() was
writing one line with the details of the timeline split, at the end.
This commit fixes these issues.
Back-patch to v10 where wait events for a timeline history file was added.
Author: Masahiro Ikeda
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/d11b0c910b63684424e06772eb844ab5@oss.nttdata.com
Factor out code common to _bt_lock_branch_parent() and _bt_pagedel()
into a new utility function. This new function is used to check that
the left sibling of a deletion target page does not have the
INCOMPLETE_SPLIT page flag set. If it is set then deletion is unsafe;
there won't be a usable pivot tuple (with a downlink) in the parent page
that points to the deletion target page. The page deletion algorithm is
not prepared to deal with that. Also restructure an existing, related
utility function that checks if the right sibling of the target page has
the ISHALFDEAD page flag set.
This organization highlights the symmetry between the two cases. The
goal is to make the design of page deletion clearer. Both functions
involve a sibling page with a flag that indicates that there was an
interrupted operation (a page split or a page deletion) that resulted in
a page pointed to by sibling pages, but not pointed to in the parent.
And, both functions indicate if page deletion is unsafe due to the
absence of a particular downlink in the parent page.
checkcondition_str() failed to report multiple matches for a prefix
pattern correctly: it would dutifully merge the match positions, but
then after exiting that loop, if the last prefix-matching word had
had no suitable positions, it would report there were no matches.
The upshot would be failing to recognize a match that the query
should match.
It looks like you need all of these conditions to see the bug:
* a phrase search (else we don't ask for match position details)
* a prefix search item (else we don't get to this code)
* a weight restriction (else checkclass_str won't fail)
Noted while investigating a problem report from Pavel Borisov,
though this is distinct from the issue he was on about.
Back-patch to 9.6 where phrase search was added.
We were acquiring object locks then deleting objects one by one, instead
of acquiring all object locks first, ignoring those that did not exist,
and then deleting all objects together. The latter is the correct
protocol to use, and what this commits changes to code to do. Failing
to follow that leads to "cache lookup failed for relation XYZ" error
reports when DROP OWNED runs concurrently with other DDL -- for example,
a session termination that removes some temp tables.
Author: Álvaro Herrera
Reported-by: Mithun Chicklore Yogendra (Mithun CY)
Reviewed-by: Ahsan Hadi, Tom Lane
Discussion: https://postgr.es/m/CADq3xVZTbzK4ZLKq+dn_vB4QafXXbmMgDP3trY-GuLnib2Ai1w@mail.gmail.com
Both the backend and libpq leaked buffers containing encrypted data
to be transmitted, so that the process size would grow roughly as
the total amount of data sent.
There were also far-less-critical leaks of the same sort in GSSAPI
session establishment.
Oversight in commit b0b39f72b, which I failed to notice while
reviewing the code in 2c0cdc818.
Per complaint from pmc@citylink.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200504115649.GA77072@gate.oper.dinoex.org
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Remove one of the arguments to btvacuumpage(), and give up on the idea
that it's a recursive function. We now use the term "backtracking" to
refer to the case where an earlier block must be visited to make sure no
tuples that need to be removed were missed.
Advertising btvacuumpage() as a recursive function was unhelpful. In
reality the function always simulates recursion with a loop (it doesn't
actually call itself). This wasn't just necessary as a precaution (per
the comments mentioning tail recursion), though. There is no reliable
natural limit on the number of times we can backtrack.
There are important behavioral difference when "recursing"/backtracking,
mostly related to page deletion. We don't perform page deletion when
backtracking due to the extra complexity. And when we recurse, we're
not performing a physical order scan anymore, so we expect fairly
different conditions to hold for the page. Structuring the code like
this makes it clearer how _bt_pagedel() cooperates with btvacuumpage()
and btvacuumscan() (as established in commit b0229f26 and commit
73a076b0).
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzmRGMDWiLMcb+zagG9652PboNN4Gfcq1Gc_wJL6A716MA@mail.gmail.com
If the client is compiled with GSSAPI support and tries to start up GSS
with the server, but the server is not compiled with GSSAPI support, we
would mistakenly end up falling through to call ProcessStartupPacket
with secure_done = true, but the client might then try to perform SSL,
which the backend wouldn't understand and we'd end up failing the
connection with:
FATAL: unsupported frontend protocol 1234.5679: server supports 2.0 to 3.0
Fix by arranging to track ssl_done independently from gss_done, instead
of trying to use the same boolean for both.
Author: Andrew Gierth
Discussion: https://postgr.es/m/87h82kzwqn.fsf@news-spur.riddles.org.uk
Backpatch: 12-, where GSSAPI encryption was added.
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
On further reflection, code comments added by commit b0229f26 slightly
misrepresented how we determine the oldest bpto.xact for the index.
btvacuumpage() does not treat the bpto.xact of a page that it put in the
FSM as a candidate to be the oldest deleted page (the delete-marked page
that has the oldest bpto.xact XID among all pages encountered).
The definition of a deleted page for the purposes of the bpto.xact
calculation is different from the definition used by the bulk delete
statistics. The bulk delete statistics don't distinguish between pages
that were deleted by the current VACUUM, pages deleted by a previous
VACUUM operation but not yet recyclable/reusable, and pages that are
reusable (though reusable pages are counted separately).
Backpatch: 11-, just like commit b0229f26.
The logic for determining how many nbtree pages in an index are deleted
pages sometimes undercounted pages. Pages that were deleted by the
current VACUUM operation (as opposed to some previous VACUUM operation
whose deleted pages have yet to be reused) were sometimes overlooked.
The final count is exposed to users through VACUUM VERBOSE's "%u index
pages have been deleted" output.
btvacuumpage() avoided double-counting when _bt_pagedel() deleted more
than one page by assuming that only one page was deleted, and that the
additional deleted pages would get picked up during a future call to
btvacuumpage() by the same VACUUM operation. _bt_pagedel() can
legitimately delete pages that the btvacuumscan() scan will not visit
again, though, so that assumption was slightly faulty.
Fix the accounting by teaching _bt_pagedel() about its caller's
requirements. It now only reports on pages that it knows btvacuumscan()
won't visit again (including the current btvacuumpage() page), so
everything works out in the end.
This bug has been around forever. Only backpatch to v11, though, to
keep _bt_pagedel() is sync on the branches that have today's bugfix
commit b0229f26da. Note that this commit changes the signature of
_bt_pagedel(), just like commit b0229f26da.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-
Commit 857f9c36cd (which taught nbtree VACUUM to skip a scan of the
index from btcleanup in situations where it doesn't seem worth it) made
VACUUM maintain the oldest btpo.xact among all deleted pages for the
index as a whole. It failed to handle all the details surrounding pages
that are deleted by the current VACUUM operation correctly (though pages
deleted by some previous VACUUM operation were processed correctly).
The most immediate problem was that the special area of the page was
examined without a buffer pin at one point. More fundamentally, the
handling failed to account for the full range of _bt_pagedel()
behaviors. For example, _bt_pagedel() sometimes deletes internal pages
in passing, as part of deleting an entire subtree with btvacuumpage()
caller's page as the leaf level page. The original leaf page passed to
_bt_pagedel() might not be the page that it deletes first in cases where
deletion can take place.
It's unclear how disruptive this bug may have been, or what symptoms
users might want to look out for. The issue was spotted during
unrelated code review.
To fix, push down the logic for maintaining the oldest btpo.xact to
_bt_pagedel(). btvacuumpage() is now responsible for pages that were
fully deleted by a previous VACUUM operation, while _bt_pagedel() is now
responsible for pages that were deleted by the current VACUUM operation
(this includes half-dead pages from a previous interrupted VACUUM
operation that become fully deleted in _bt_pagedel()). Note that
_bt_pagedel() should never encounter an existing deleted page.
This commit theoretically breaks the ABI of a stable release by changing
the signature of _bt_pagedel(). However, if any third party extension
is actually affected by this, then it must already be completely broken
(since there are numerous assumptions made in _bt_pagedel() that cannot
be met outside of VACUUM). It seems highly unlikely that such an
extension actually exists, in any case.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-, where the "skip full scan" feature was introduced.
Commit 79dfa8a has introduced a check to catch when the minimum protocol
version was set higher than the maximum version, however an error was
getting generated when both bounds are set even if they are able to
work, causing a backend to not use a new SSL context but keep the old
one.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/14BFD060-8C9D-43B4-897D-D5D9AA6FC92B@yesql.se
Checkpointer uses its MyLatch to wake up when a checkpoint request is
received. But before commit c655077639 the latch was not used for
anything else, so the code could just go to sleep after each loop
without rechecking the sleeping condition. That commit added a separate
ResetLatch in its code path[1], which can cause a checkpoint to go
unnoticed for potentially a long time.
Fix by skipping sleep if any checkpoint flags are set. Also add a test
to verify this; authored by Kyotaro Horiguchi.
[1] CreateCheckPoint -> InvalidateObsoleteReplicationSlots ->
ConditionVariableTimeSleep
Report and diagnosis by Kyotaro Horiguchi.
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.141956.891237856186513376.horikyota.ntt@gmail.com
Lack of these checks could cause visible misbehavior, including
assertion failures. This was missed in commit c655077639, whereby
restart_lsn becomes invalid when the size limit is exceeded.
Also reword some existing error messages, and add errdetail(), so that
the reported errors all match in spirit.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.093710.447591748588426656.horikyota.ntt@gmail.com
pg_statio_all_tables view appears to have a wrong grouping. As the result
numbers of toast index blocks read and hit were multiplied to the number of
table indexes. This commit fixes the view definition.
Backpatching this appears difficult. We don't have a mechanism to patch a
system catalog of existing instances in minor upgrade. We can write a
release notes instruction to do this manually. But per discussion this is
probably not so critical bug for doing such an intrusive fix.
Reported-by: Andrei Zubkov
Discussion: https://postgr.es/m/CAPpHfdtMYkkNudLMG9G0dxX_B%3Dn5sfKzOyxxrvWYtSicaGW0Lw%40mail.gmail.com
Queries such as '!(foo<->bar)' failed to find matching rows when
implemented as a GiST or GIN index search. That's because of
failing to handle phrase searches as tri-valued when considering
a query without any position information for the target tsvector.
We can only say that the phrase operator might match, not that it
does match; and therefore its NOT also might match. The previous
coding incorrectly inverted the approximate phrase result to
decide that there was certainly no match.
To fix, we need to make TS_phrase_execute return a real ternary result,
and then bubble that up accurately in TS_execute. As long as we have
to do that anyway, we can simplify the baroque things TS_phrase_execute
was doing internally to manage tri-valued searching with only a bool
as explicit result.
For now, I left the externally-visible result of TS_execute as a plain
bool. There do not appear to be any outside callers that need to
distinguish a three-way result, given that they passed in a flag
saying what to do in the absence of position data. This might need
to change someday, but we wouldn't want to back-patch such a change.
Although tsginidx.c has its own TS_execute_ternary implementation for
use at upper index levels, that sadly managed to get this case wrong
as well :-(. Fixing it is a lot easier fortunately.
Per bug #16388 from Charles Offenbacher. Back-patch to 9.6 where
phrase search was introduced.
Discussion: https://postgr.es/m/16388-98cffba38d0b7e6e@postgresql.org
Avoid accessing the leaf page's top parent tuple without a buffer lock
held during the second phase of nbtree page deletion. The old approach
was safe, though only because VACUUM never drops its buffer pin (and
because only VACUUM itself can modify a half-dead page). Even still, it
seems like a good idea to be strict here. Tighten things up by copying
the top parent page's block number to a local variable before releasing
the buffer lock on the leaf page -- not after.
This is a follow-up to commit fa7ff642, which fixed a similar issue in
the first phase of nbtree page deletion.
Update some related comments in passing.
Discussion: https://postgr.es/m/CAH2-WzkLgyN3zBvRZ1pkNJThC=xi_0gpWRUb_45eexLH1+k2_Q@mail.gmail.com
Avoid accessing the deletion target page's special area during nbtree
page deletion at a point where there is no buffer lock held. This issue
was detected by a patch that extends Valgrind's memcheck tool to mark
nbtree pages that are unsafe to access (due to not having a buffer lock
or buffer pin) as NOACCESS.
We do hold a buffer pin at this point, and only access the special area,
so the old approach was safe. Even still, it seems like a good idea to
tighten up the rules in this area. There is no reason to not simply
insist on always holding a buffer lock (not just a pin) when accessing
nbtree pages.
Update some related comments in passing.
Discussion: https://postgr.es/m/CAH2-WzkLgyN3zBvRZ1pkNJThC=xi_0gpWRUb_45eexLH1+k2_Q@mail.gmail.com
Before sleeping, WalSndWaitForWal() sends a keepalive if MyWalSnd->write
< sentPtr. When the latest physical LSN yields no logical replication
messages (a common case), that keepalive elicits a reply. Processing
the reply updates pg_stat_replication.replay_lsn. WalSndLoop() lacks
that; when WalSndLoop() slept, replay_lsn advancement could stall until
wal_receiver_status_interval elapsed. This sometimes stalled
src/test/subscription/t/001_rep_changes.pl for up to 10s.
Reviewed by Fujii Masao and Michael Paquier.
Discussion: https://postgr.es/m/20200418070142.GA1075445@rfd.leadboat.com
CreateRole() was passing a Value node, not a RoleSpec node, for the
newly-created role name when adding the role as a member of existing
roles for the IN ROLE syntax.
This mistake went unnoticed because the node in question is used only
for error messages and is not accessed on non-error paths.
In older pg versions (such as 9.5 where this was found), this results
in an "unexpected node type" error in place of the real error. That
node type check was removed at some point, after which the code would
accidentally fail to fail on 64-bit platforms (on which accessing the
Value node as if it were a RoleSpec would be mostly harmless) or give
an "unexpected role type" error on 32-bit platforms.
Fix the code to pass the correct node type, and add an lfirst_node
assertion just in case.
Per report on irc from user m1chelangelo.
Backpatch all the way, because this error has been around for a long
time.
Commit 32ff26911 introduced use of rank() into the triggers view to
calculate the spec-mandated action_order column. As written, this
prevents query constraints on the table-name column from being pushed
below the window aggregate step. That's bad for performance of this
typical usage pattern, since the view now has to be evaluated for all
tables not just the one(s) the user wants to see. It's also the cause
of some recent buildfarm failures, in which trying to evaluate the view
rows for triggers in process of being dropped resulted in "cache lookup
failed for function NNN" errors. Those rows aren't of interest to the
test script doing the query, but the filter that would eliminate them
is being applied too late. None of this happened before the rank()
call was there, so it's a regression compared to v10 and before.
We can improve matters by changing the rank() call so that instead of
partitioning by OIDs, it partitions by nspname and relname, casting
those to sql_identifier so that they match the respective view output
columns exactly. The planner has enough intelligence to know that
constraints on partitioning columns are safe to push down, so this
eliminates the performance problem and the regression test failure
risk. We could make the other partitioning columns match view outputs
as well, but it'd be more complicated and the performance benefits
are questionable.
Side note: as this stands, the planner will push down constraints on
event_object_table and trigger_schema, but not on event_object_schema,
because it checks for ressortgroupref matches not expression
equivalence. That might be worth improving someday, but it's not
necessary to fix the immediate concern.
Back-patch to v11 where the rank() call was added. Ordinarily we'd not
change information_schema in released branches, but the test failure has
been seen in v12 and presumably could happen in v11 as well, so we need
to do this to keep the buildfarm happy. The change is harmless so far
as users are concerned. Some might wish to apply it to existing
installations if performance of this type of query is of concern,
but those who don't are no worse off.
I bumped catversion in HEAD as a pro forma matter (there's no
catalog incompatibility that would really require a re-initdb).
Obviously that can't be done in the back branches.
Discussion: https://postgr.es/m/5891.1587594470@sss.pgh.pa.us
78ea8b5 has fixed an issue related to the recycling of WAL segments on
standbys depending on archive_mode. However, it has introduced a
regression with the handling of WAL segments ready to be archived during
crash recovery, causing those files to be recycled without getting
archived.
This commit fixes the regression by tracking in shared memory if a live
cluster is either in crash recovery or archive recovery as the handling
of WAL segments ready to be archived is different in both cases (those
WAL segments should not be removed during crash recovery), and by using
this new shared memory state to decide if a segment can be recycled or
not. Previously, it was not possible to know if a cluster was in crash
recovery or archive recovery as the shared state was able to track only
if recovery was happening or not, leading to the problem.
A set of TAP tests is added to close the gap here, making sure that WAL
segments ready to be archived are correctly handled when a cluster is in
archive or crash recovery with archive_mode set to "on" or "always", for
both standby and primary.
Reported-by: Benoît Lobréau
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200331172229.40ee00dc@firost
Backpatch-through: 9.5
In the footsteps of aaf069aa3, remove ACLDEBUG, which was the only
other remaining undocumented symbol in pg_config_manual.h. The fact
that nobody had bothered to document it in seventeen years is a good
clue to its usefulness. In practice, none of the tracing logic it
enabled would be of any value without additional effort.
Discussion: https://postgr.es/m/6631.1587565046@sss.pgh.pa.us
Nobody really uses this stuff, especially not since we created
valgrind-based infrastructure that does the same thing better.
It is thus unsurprising that the generation.c and slab.c versions
were actually broken. Rather than fix 'em, let's just remove 'em.
Alexander Lakhin
Discussion: https://postgr.es/m/8936216c-3492-3f6e-634b-d638fddc5f91@gmail.com
Function names declared "extern" now use BackupManifest in the name
rather than just Manifest, and data types use backup_manifest
rather than just manifest.
Per note from Michael Paquier.
Discussion: http://postgr.es/m/20200418125713.GG350229@paquier.xyz
In a9c35cf85c I changed ExecMakeTableFunctionResult() to dynamically
allocate the FunctionCallInfo used to call the SRF. Unfortunately I
did not account for the fact that the surrounding memory context has
query lifetime, leading to a leak till the end of the query.
In most cases the leak is fairly inconsequential, but if the
FunctionScan is done many times in the query, the leak can add
up. This happens e.g. if the function scan is on the inner side of a
nested loop, due to a lateral join.
EXPLAIN SELECT sum(f) FROM generate_series(1, 100000000) g(i), generate_series(i, i+1) f;
quickly shows the leak.
Instead of explicitly freeing the FunctionCallInfo it seems better to
make sure all the per-set temporary state in
ExecMakeTableFunctionResult() is cleaned up wholesale. Currently
that's probably just the FunctionCallInfo allocation, but since
there's some initialization work, and since there's already an
appropriate context, this seems like a more robust approach.
Bug: #16112
Reported-By: Ben Cornett
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/16112-4448bbf55a404189%40postgresql.org
Backpatch: 12, a9c35cf85c
When estimating the number of pre-sorted groups in cost_incremental_sort
we must not pass Vars with varno 0 to estimate_num_groups, which would
cause failues in find_base_rel. This may happen when sorting output of
set operations, thanks to generate_append_tlist.
Unlike recurse_set_operations we can't easily access the original target
list, so if we find any Vars with varno 0, we fall back to the default
estimate DEFAULT_NUM_DISTINCT.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20200411214639.GK2228%40telsasoft.com
This Assert was trying to ensure that the number of columns in the foreign
key being cloned was the same number of attributes in the parentRel. Of
course, it's perfectly valid to have columns in the table which are not
part of the foreign key constraint. It appears that this Assert was
misunderstanding that.
Reported-by: Rajkumar Raghuwanshi
Reviewed-by: amul sul
Discussion: https://postgr.es/m/CAKcux6=z1dtiWw5BOpqDx-U6KTiq+zD0Y2m810zUtWL+giVXWA@mail.gmail.com
index.c supposed that it could just use a PG_TRY block to clean up the
state associated with an active REINDEX operation. However, that code
doesn't run if we do a FATAL exit --- for example, due to a SIGTERM
shutdown signal --- while the REINDEX is happening. And that state does
get consulted during catalog accesses, which makes it problematic if we
do any catalog accesses during shutdown --- for example, to clean up any
temp tables created in the session.
If this combination of circumstances occurred, we could find ourselves
trying to access already-freed memory. In debug builds that'd fairly
reliably cause an assertion failure. In production we might often
get away with it, but with some bad luck it could cause a core dump.
Another possible bad outcome is an erroneous conclusion that an
index-to-be-accessed is being reindexed; but it looks like that would
be unlikely to have any consequences worse than failing to drop temp
tables right away. (They'd still get dropped by the next session that
uses that temp schema.)
To fix, get rid of the use of PG_TRY here, and instead hook into
the transaction abort mechanisms to clean up reindex state.
Per bug #16378 from Alexander Lakhin. This has been wrong for a
very long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16378-7a70ca41b3ec2009@postgresql.org
Working on commit 1c455078b led me to check through FunctionCallInvoke
call sites to see if every one was being honest about (a) making sure
that fcinfo.isnull is initially false, and (b) checking its state after
the call. Sure enough, I found some violations.
The main one is that finalize_partialaggregate re-used serialfn_fcinfo
without resetting isnull, even though it clearly intends to cater for
serialfns that return NULL. There would only be an issue with a
non-strict serialfn, since it's unlikely that a serialfn would return
NULL for non-null input. We have no non-strict serialfns in core, and
there may be none in the wild either, which would account for the lack
of complaints. Still, it's clearly wrong, so back-patch that fix to
9.6 where finalize_partialaggregate was introduced.
Also, arrayfuncs.c and rowtypes.c contained various callers that were
not bothering to check for result nulls. While what's being called is
a comparison or hash function that probably *shouldn't* return null,
that's a lousy excuse for not having any check at all. There are
existing places that just Assert(!fcinfo->isnull) in comparable
situations, so I added that to the places that were calling btree
comparison or hash support functions. In the places calling
boolean-returning equality functions, it's quite cheap to have them
treat isnull as FALSE, so make those places do that. Also remove some
"locfcinfo->isnull = false" assignments that are unnecessary given the
assumption that no previous call returned null. These changes seem like
mostly neatnik-ism or debugging support, so I didn't back-patch.
When a partition is detached, any triggers that had been cloned from its
parent were not properly disentangled from its parent triggers.
This resulted in triggers that could not be dropped because they
depended on the trigger in the trigger in the no-longer-parent table:
ALTER TABLE t DETACH PARTITION t1;
DROP TRIGGER trig ON t1;
ERROR: cannot drop trigger trig on table t1 because trigger trig on table t requires it
HINT: You can drop trigger trig on table t instead.
Moreover the table can no longer be re-attached to its parent, because
the trigger name is already taken:
ALTER TABLE t ATTACH PARTITION t1 FOR VALUES FROM (1)TO(2);
ERROR: trigger "trig" for relation "t1" already exists
The former is a bug introduced in commit 86f575948c. (The latter is
not necessarily a bug, but it makes the bug more uncomfortable.)
To avoid the complexity that would be needed to tell whether the trigger
has a local definition that has to be merged with the one coming from
the parent table, establish the behavior that the trigger is removed
when the table is detached.
Backpatch to pg11.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/20200408152412.GZ2228@telsasoft.com
Commit 0d861bbb, which introduced deduplication to nbtree, added some
logic to take large posting list tuples into account when choosing a
split point. We subtract firstright posting list overhead from the
projected new high key size when calculating leftfree/rightfree values
for an affected candidate split point. Posting list tuples aren't
special to nbtsplitloc.c, but taking them into account like this makes a
huge difference in practice. Posting list tuples are frequently tuple
size outliers.
However, commit 0d861bbb missed a closely related issue: split interval
itself is calculated based on the assumption that tuples on the page
being split are roughly equisized. That assumption was acceptable back
when commit fab25024 taught the logic for choosing a split point about
suffix truncation, but it's pretty questionable now that very large
tuple sizes are common. This oversight led to unbalanced page splits in
low cardinality multi-column indexes when deduplication was used: page
splits that don't give sufficient weight to how unbalanced the split is
when the interval happens to include some large posting list tuples (and
when most other tuples on the page are not so large).
Nail this down by calculating an initial split interval in a way that's
attuned to the actual cost that we want to keep under control (not a
fuzzy proxy for the cost): apply a leftfree + rightfree evenness test to
each candidate split point that actually gets included in the split
interval (for the default strategy). This replaces logic that used a
percentage of all legal split points for the page as the basis of the
initial split interval.
Discussion: https://postgr.es/m/CAH2-WznJt5aT2uUB2Bs+JBLdwe0XTX67+xeLFcaNvCKxO=QBVQ@mail.gmail.com
Although selfuncs.c will never call a target operator with null inputs,
some functions might return null anyway. The existing coding will fail
if that happens (since FunctionCall2Coll will punt), which seems
undesirable given that matchingsel() has such a broad range of potential
applicability --- in fact, we already have a problem because we apply it
to jsonb_path_exists_opr, which can return null. Hence, rejigger the
underlying functions mcv_selectivity and histogram_selectivity to cope,
treating a null result as false.
While we are at it, we can move the InitFunctionCallInfoData overhead
out of the inner loops, which isn't a huge number of cycles but might
save something considering we are likely calling functions as cheap
as int4eq(). Plus, the number of loop cycles to be expected is much
more than it was when this code was written, since typical settings
of default_statistics_target are higher.
In view of that consideration, let's apply the same change to
var_eq_const, eqjoinsel_inner, and eqjoinsel_semi. We do not expect
equality functions to ever return null for non-null inputs (and
certainly that code has been that way a long time without complaints),
but the cycle savings seem attractive, especially in the eqjoinsel loops
where there's potentially an O(N^2) savings.
Similar code exists in ineq_histogram_selectivity and
get_variable_range, but I forebore from changing those for now.
The performance argument for changing ineq_histogram_selectivity
is really weak anyway, since that will only iterate log2(N) times.
Nikita Glukhov and Tom Lane
Discussion: https://postgr.es/m/9d3b0959-95d6-c37e-2c0b-287bcfe5c705@postgrespro.ru
Commit f2fcad27d5 (9.6 era) added the ability to mark objects as
dependent an extension, but forgot to add a way for such dependencies to
be removed. This commit fixes that oversight.
Strictly speaking this should be backpatched to 9.6, but due to lack of
demand we're not doing so at this time.
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
Reviewed-by: ahsan hadi <ahsan.hadi@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
The views pg_stat_progress_* had not gotten the memo that
pg_read_all_stats is supposed to be able to read all statistics. Also
make a pass over all text-returning pg_stat_xyz functions that could
return "insufficient privilege" and make sure they also respect
pg_read_all_status.
Reported-by: Andrey M. Borodin
Reviewed-by: Andrey M. Borodin, Kyotaro Horiguchi
Discussion: https://postgr.es/m/13145F2F-8458-4977-9D2D-7B2E862E5722@yandex-team.ru
We have repeatedly seen the buildfarm reach the Assert(false) in
SyncRepGetSyncStandbysPriority. This apparently is due to failing to
consider the possibility that the sync_standby_priority values in
shared memory might be inconsistent; but they will be whenever only
some of the walsenders have updated their values after a change in
the synchronous_standby_names setting. That function is vastly too
complex for what it does, anyway, so rewriting it seems better than
trying to apply a band-aid fix.
Furthermore, the API of SyncRepGetSyncStandbys is broken by design:
it returns a list of WalSnd array indexes, but there is nothing
guaranteeing that the contents of the WalSnd array remain stable.
Thus, if some walsender exits and then a new walsender process
takes over that WalSnd array slot, a caller might make use of
WAL position data that it should not, potentially leading to
incorrect decisions about whether to release transactions that
are waiting for synchronous commit.
To fix, replace SyncRepGetSyncStandbys with a new function
SyncRepGetCandidateStandbys that copies all the required data
from shared memory while holding the relevant mutexes. If the
associated walsender process then exits, this data is still safe to
make release decisions with, since we know that that much WAL *was*
sent to a valid standby server. This incidentally means that we no
longer need to treat sync_standby_priority as protected by the
SyncRepLock rather than the per-walsender mutex.
SyncRepGetSyncStandbys is no longer used by the core code, so remove
it entirely in HEAD. However, it seems possible that external code is
relying on that function, so do not remove it from the back branches.
Instead, just remove the known-incorrect Assert. When the bug occurs,
the function will return a too-short list, which callers should treat
as meaning there are not enough sync standbys, which seems like a
reasonably safe fallback until the inconsistent state is resolved.
Moreover it's bug-compatible with what has been happening in non-assert
builds. We cannot do anything about the walsender-replacement race
condition without an API/ABI break.
The bogus assertion exists back to 9.6, but 9.6 is sufficiently
different from the later branches that the patch doesn't apply at all.
I chose to just remove the bogus assertion in 9.6, feeling that the
probability of a bad outcome from the walsender-replacement race
condition is too low to justify rewriting the whole patch for 9.6.
Discussion: https://postgr.es/m/21519.1585272409@sss.pgh.pa.us
In some corner cases, this could also lead to corrupted values being
included in the tuple.
Users who are concerned that they are affected by this should first
upgrade and then perform a base backup of their database and restore onto
an off-line server. They should then query each table with generated
columns to ensure there are no rows where the generated expression does
not match a newly calculated version of the GENERATED ALWAYS expression.
If no crashes occur and no rows are returned then you're not affected.
Fixes bug #16369.
Reported-by: Cameron Ezell
Discussion: https://postgr.es/m/16369-5845a6f1bef59884@postgresql.org
Backpatch-through: 12 (where GENERATED ALWAYS columns were added.)
