so that we close and flush the doomed relation's relcache entry before
we start to delete the underlying catalog rows, rather than afterwards.
For awhile yesterday I thought that an unexpected relcache entry rebuild
partway through this sequence might explain the infrequent parallel
regression failures we were chasing. It doesn't, mainly because there's
no CommandCounterIncrement in the sequence and so the deletions aren't
"really" done yet. But it sure seems like trouble waiting to happen.
> > "pg_ctl register -w ...." the "-w" parameter was not put in
> the registry "ImagePath"
> > value for the Postgres service. (I added it manually to test.) So I
> > suspect that "pg_ctl register" will need to be enhanced to add the
> > "-w" parameter to the registry settings.
Dave Page
relcache entries. Also, change TransactionIdIsCurrentTransactionId()
so that if consulted during transaction abort, it will not say that
the aborted xact is still current. (It would be better to ensure that
it's never called at all during abort, but I'm not sure we can easily
guarantee that.) In combination, these fix a crash we have seen
occasionally during parallel regression tests of 8.0.
from being accepted after the outer right brace. Per report from
Markus Bertheau.
Also add regression test cases for this change, and for previous
recent array literal parser changes.
PROCLOCK structs in shared memory now have only a bitmask for held
locks, rather than counts (making them 40 bytes smaller, which is a
good thing). Multiple locks within a transaction are counted in the
local hash table instead, and we have provision for tracking which
ResourceOwner each count belongs to. Solves recently reported problem
with memory leakage within long transactions.
for every command executed within a transaction. For long transactions
this was a significant memory leak. Instead, we can delete a portal's
or subtransaction's ResourceOwner immediately, if we physically transfer
the information about its locks up to the parent owner. This does not
fully solve the leak problem; we need to do something about counting
multiple acquisitions of the same lock in order to fix it. But it's a
necessary step along the way.
ColLabel instead of just ColId --- that is, any keyword can appear after
a dot and it will be taken as an identifier. Fixes problems with names
that are okay as standalone function names but fail when qualified.
updates are no longer WAL-logged nor even fsync'd; we do not need to,
since after a crash no old pg_subtrans data is needed again. We truncate
pg_subtrans to RecentGlobalXmin at each checkpoint. slru.c's API is
refactored a little bit to separate out the necessary decisions.
RecentXmin (== MyProc->xmin). This ensures that it will be safe to
truncate pg_subtrans at RecentGlobalXmin, which should largely eliminate
any fear of bloat. Along the way, eliminate SubTransXidsHaveCommonAncestor,
which isn't really needed and could not give a trustworthy result anyway
under the lookback restriction.
In an unrelated but nearby change, #ifdef out GetUndoRecPtr, which has
been dead code since 2001 and seems unlikely to ever be resurrected.
>>'127.0.0.1/32' instead of '127.0.0.1 255.255.255.255'.
>>
>>
>
>Yeah, that's probably the path of least resistance. Note that the
>comments and possibly the SGML docs need to be adjusted to match,
>however, so it's not quite a one-liner.
Andrew Dunstan
>
> The patch adds missing the "libpgport.a" file to the installation under
> "install-all-headers". It is needed by some contribs. I install the
> library in "pkglibdir", but I was wondering whether it should be "libdir"?
> I was wondering also whether it would make sense to have a "libpgport.so"?
>
> It fixes various macros which are used by contrib makefiles, especially
> libpq_*dir and LDFLAGS when used under PGXS. It seems to me that they are
> needed to
>
> It adds the ability to test and use PGXS with contribs, with "make
> USE_PGXS=1". Without the macro, this is exactly as before, there should be
> no difference, esp. wrt the vpath feature that seemed broken by previous
> submission. So it should not harm anybody, and it is useful at least to me.
>
> It fixes some inconsistencies in various contrib makefiles
> (useless override, ":=" instead of "=").
Fabien COELHO
multiline command or to rerun the command easily later.
Whereas displaying the failed SQL command is a matter of fixing the
error
messages.
The latter is complicated by failed COPY commands which, with
die-on-errors
off, results in the data being processed as a command, so dumping the
command will dump all of the data.
In the case of long commands, should the whole command be dumped? eg.
(eg.
several pages of function definition).
In the case of the COPY command, I'm not sure what to do. Obviously, it
would be best to avoid sending the data, but the data and command are
combined (from memory). Also, the 'data' may be in the form of INSERT
statements.
Attached patch produces the first 125 chars of the command:
pg_restore: [archiver (db)] Error while PROCESSING TOC:
pg_restore: [archiver (db)] Error from TOC Entry 26; 1255 16449270
FUNCTION
plpgsql_call_handler() pjw
pg_restore: [archiver (db)] could not execute query: ERROR: function
"plpgsql_call_handler" already exists with same argument types
Command was: CREATE FUNCTION plpgsql_call_handler() RETURNS
language_handler
AS '/var/lib/pgsql-8.0b1/lib/plpgsql', 'plpgsql_call_han...
pg_restore: [archiver (db)] Error from TOC Entry 27; 1255 16449271
FUNCTION
plpgsql_validator(oid) pjw
pg_restore: [archiver (db)] could not execute query: ERROR: function
"plpgsql_validator" already exists with same argument types
Command was: CREATE FUNCTION plpgsql_validator(oid) RETURNS void
AS '/var/lib/pgsql-8.0b1/lib/plpgsql', 'plpgsql_validator'
LANGU...
Philip Warner
to/in the psql-tabcomplete code. This diff includes the still missing
tab-complete support for TABLESPACE I already sent earlier. New in this
version of the patch is a small adaption of the tab-complete code to
support the adjusted SAVEPOINT-Syntax commited by Tom, as well as
completion of the only half working (and I think only by accident)
tabcomplete-suppport for "BEGIN [ TRANSACTION | WORK ]".
below is a complete list of the things I have changed with this patch:
*) add tablespace support for CREATE/DROP/ALTER and \db
*) sync the list of possible commands following ALTER with the docs (by
adding
AGGREGATE,CONVERSATION,DOMAIN,FUNCTION,LANGUAGE,OPERATOR,SEQUENCE,TABLESPACE
and TYPE)
*) provide a list of valid users after "OWNER TO"
*) tab-complete support for ALTER (AGGREGATE|CONVERSION|FUNCTION)
*) basic tab-complete support for ALTER DOMAIN
*) provide a list of suitable indexes following ALTER TABLE <sth>
CLUSTER ON(?)
*) add "CLUSTER ON" and "SET" to the ALTER TABLE <sth> - tab-complete
list(fixes incorrect/wrong tab-complete with ALTER TABLE <sth> SET
+<TAB> too)
*) provide a list of possible indexes following ALTER TABLE <sth> CLUSTER ON
*) provide list of possible commands(WITHOUT CLUSTER,WITHOUT OIDS,
TABLESPACE) following ALTER TABLE <sth> SET
*) sync "COMMENT ON" with docs by adding "CAST","CONVERSION","FUNCTION"
*) add ABSOLUT to the list of possible commands after FETCH
*) "END" was missing from the sql-commands overview (though it had
completion support!) - i know it's depreciated but we have ABORT and
others still in ...
*) fixes small buglet with ALTER (TRIGGER|CLUSTER) ON autocomplete
(CLUSTER ON +<TAB> would produce CLUSTER ON ON - same for TRIGGER ON)
*) adapt to new SAVEPOINT syntax
*) fix incomplete Support for BEGIN [ TRANSACTION | WORK ]
Stefan Kaltenbrunn
will treat any unquoted string that starts with a $ and has no preceding
identifier chars as a potential $-quote tag, it then makes sure that the
tag chars are valid. If so, it processes the $-quote.
Philip Warner
> pg_restore, as it seems that some people have scripts that rely on the
> previous "abort on error" default behavior when restoring data with a
> direct connection.
>
> Fabien Coelho
> why does CVS tip still give me
>
> regression=# select extract(century from now());
> date_part
> -----------
> 20
> (1 row)
> [ ... looks in code ... ]
>
> Apparently it's because you fixed only timestamp_part, and not
> timestamptz_part. I'm not too sure about what timestamp_trunc or
> timestamptz_trunc should do, but they may be wrong as well.
Sigh... as usual, what is not tested does not work:-(
> Could we have a more complete patch?
Please find a submission attached. I hope it really fixes all decade,
century and millenium issues for extract and *_trunc functions on
interval
and other timestamp types. If someone could check that the results
are reasonnable, it would be great.
I indeed overlooked the fact that there were two functions. The patch
fixes the code so that both variants agree.
I added comments to interval extractions, because it relies on the C
division to have a negative remainder: -7/10 = 0 and remains -7.
As for *_trunc functions, I have chosen to put the first year of the
century or millennium: -100, 1, 101... 1001 2001 etc. Indeed, I don't
think it would make sense to put 2000 (last year of the 2nd millennium)
for rounding all years of the third millenium.
I also fixed the code so that all decades last 10 years and decade 199
means the 1990's.
I have added some tests that are relevant to deal with tricky cases. The
formula may be simplified, but all these cases must pass. Please keep
them.
Fabien Coelho
presence of dropped columns. Document the already-presumed fact that
eref aliases in relation RTEs are supposed to have entries for dropped
columns; cause the user alias structs to have such entries too, so that
there's always a one-to-one mapping to the underlying physical attnums.
Adjust expandRTE() and related code to handle the case where a column
that is part of a JOIN has been dropped. Generalize expandRTE()'s API
so that it can be used in a couple of places that formerly rolled their
own implementation of the same logic. Fix ruleutils.c to suppress
display of aliases for columns that were dropped since the rule was made.
value of 'start' could be past the end of the page, if the page was
split by some concurrent inserting process since we visited it. In
this situation the code could look at bogus entries and possibly find
a match (since after all those entries still contain what they had
before the split). This would lead to 'specified item offset is too large'
followed by 'PANIC: failed to add item to the page', as reported by Joe
Conway for scenarios involving heavy concurrent insertion activity.
to the physical layout of the rowtype, ie, there are dummy arguments
corresponding to any dropped columns in the rowtype. We formerly had a
couple of places that did it this way and several others that did not.
Fixes Gaetano Mendola's "cache lookup failed for type 0" bug of 5-Aug.
global variables are problematic on this platform. Simplest solution
seems to be to initialize pthread key variable to 0. Also, rename this
variable and check_sigpipe_handler to something involving "pq" to
avoid gratuitous pollution of application namespace.
of XLogInsert had the same sort of checkpoint interlock problem as
RecordTransactionCommit, and indeed I found some. Btree index build
and ALTER TABLE SET TABLESPACE write data outside the friendly confines
of the buffer manager, and therefore they have to take their own
responsibility for checkpoint interlock. The easiest solution seems to
be to force smgrimmedsync at the end of the index build or table copy,
even when the operation is being WAL-logged. This is sufficient since
the new index or table will be of interest to no one if we don't get
as far as committing the current transaction.
therefore starting with GetCurrentTransactionId is wrong. Fixes
miscomputation of RecentGlobalXmin leading to bizarre behavior
reported by Gavin Sherry.
don't hold an open file reference to the original table at the end.
This is a good thing in any case, particularly so on Windows which
cannot drop the table file otherwise.
by the SQL standard. For backwards compatibility, however, continue to
accept the syntax without. Minor editorialization in the reference pages
for these commands, too.
and doesn't process forward slashes in the same way as external
commands. Quoting the first argument to COPY does not convert forward
to backward slashes, but COPY does properly process quoted forward
slashes in the second argument.
Win32 COPY works with quoted forward slashes in the first argument only if the
current directory is the same as the directory of the first argument.
it with previous prototype to suppress complaints from picky compilers,
per report from Scott Bailey. Also, remove substitute strerror
definition --- not needed, since we link this with libpgport.
for transaction commits that occurred just before the checkpoint. This is
an EXTREMELY serious bug --- kudos to Satoshi Okada for creating a
reproducible test case to prove its existence.
of '.' or '..'. Extend canonicalize_path() to trim off trailing occurrences
of these things, and use it to fix up paths where needed (which I think is
only after places where we trim the last path component, but maybe some
others will turn up). Fixes Josh's complaint that './initdb' does not
work.
slashes to backslashes #ifdef WIN32. This is to cope with the fact
that Windows seems exceedingly unfriendly to slashes in shell commands,
as per recent discussion.
CurrentMemoryContext is DLLIMPORT on Win32. Work around that by
creating stubs in the backend for palloc/pstrdup.
Also fix pg_dumpall to do proper quoting on Win32.
was previously allowed in odd places with odd results now causes an ERROR.
Also changed behavior with respect to whitespace -- trailing whitespace is
now ignored as well as leading whitespace (which has always been ignored).
Documentation updated to reflect change in whitespace handling. Also some
refactoring to what I believe is a more sensible order of several paragraphs.
There won't be any, and in fact there won't even be an RTE for NEW,
which was leading to a core dump in CVS tip. 7.4 and earlier manage
not to crash when applying ResolveNew in this scenario, but I think
it was just good fortune that they didn't. Per report from
Bernd Helmle.
o "_" is not escaped, and causes TeX to abort, thinking it's a
subscript outside of maths mode. Most of my table and field names
use underscores, so this is a really nasty one.
o The column count is calculated using the contents of opt_align. But
opt_align has one extra element, and so it's always one too many. I
changed it to count the column headings, like all the other output
formats. There may be a bug in computing opt_align that this patch
does not address, but I'm not yet familiar enough with the psql
source to fix this as well.
o The line drawing rules for each border setting (0-3) and expanded
mode didn't always match the documented behaviour and what other
formats (e.g. aligned) did. I made it as conformant as possible,
and also tidied the alignment of the first line of the footer, which
was incorrectly indented.
Roger Leigh
This avoids changing the displayed appearance of ACL columns now that
array_out decorates its output with bounds information when the lower
bound isn't one. Per gripe from Gaetano Mendola. Note that I did not
force initdb for this, although any database initdb'd in the last
couple of days is going to have some problems.
recommend that people go get Apache's rotatelogs program. Additional
benefits are that configuration is done through GUC, rather than
externally, and that the postmaster can monitor the log rotator and
restart it after failure (though we certainly hope that won't happen
often).
Andreas Pflug, some rework by Tom Lane.
subarrays of a given dimension have the same number of elements/subarrays.
Also repair a longstanding undocumented (as far as I can see) ability to
explicitly set array bounds in the array literal syntax. It now can
deal properly with negative array indicies. Modify array_out so that
arrays with non-standard lower bounds (i.e. not 1) are output with
the expicit dimension syntax. This fixes a longstanding issue whereby
arrays with non-default lower bounds had them changed to default
after a dump/reload cycle.
Modify regression tests and docs to suit, and add some minimal
documentation regarding the explicit dimension syntax.
dependency was looking at wrong columns and so would always fail.
Was not exposed by regression tests because we are only testing cases
involving built-in (pinned) types and so no actual dependency entry
exists to be removed.
Instead of putting all the OWNER TO commands at the end, it dumps then
after each object. This is WAY more readable and nice. ACLs are still
at the end.
Christopher Kings-Lynne
and history files as per recent discussion. While at it, remove
pg_terminate_backend, since we have decided we do not have time during
this release cycle to address the reliability concerns it creates.
Split the 'Miscellaneous Functions' documentation section into
'System Information Functions' and 'System Administration Functions',
which hopefully will draw the eyes of those looking for such things.
mode (per complaint from Kris Jurka) and it was only by chance that it
didn't fail in simple-query mode. A COMMIT or ROLLBACK has to be
executed by a portal, therefore it's wrong to suppose that there aren't
any live portals at CleanupTransaction time.
error code for string-too-long errors. It should be STRING_DATA_RIGHT_TRUNCATION
not STRING_DATA_LENGTH_MISMATCH. The latter probably should only be
applied to cases where a string must be exactly so many bits --- there are
no cases at all where it applies to character strings, only bit strings.
executed. Previously, the DECLARE would succeed but subsequent FETCHes
would fail since the parameter values supplied to DECLARE were not
propagated to the portal created for the cursor.
In support of this, add type Oids to ParamListInfo entries, which seems
like a good idea anyway since code that extracts a value can double-check
that it got the type of value it was expecting.
Oliver Jowett, with minor editorialization by Tom Lane.
to the old owner with the new owner. This is not necessarily right, but
it's sure a lot more likely to be what the user wants than doing nothing.
Christopher Kings-Lynne, some rework by Tom Lane.
number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
>takes a string to specify the local authentication method:
>
> initdb --auth 'ident'
>
>or whatever the user wants. I think this is more flexible and more
>compact. It would default to 'trust', and the packagers could
>set it to
>whatever they want. If their OS supports local ident, they can use
>that.
>
>Also keep in mind you might want some ident map file:
>
> initdb --auth 'ident mymap'
>
>so you would need to allow multiple words in the string.
Magnus Hagander
more nearly Oracle-equivalent. Allow matching by category as well as
specific error code. Document the set of available condition names
(or more accurately, synchronize it with the existing documentation). In
passing, update errcodes.sgml to include codes added during 7.5 development.
Create a shared function to convert a SPI error code into a string
(replacing near-duplicate code in several PLs), and use it anywhere
that a SPI function call error is reported.
machines, break tie scores by preferring shorter zone names over longer;
for names of equal length, prefer the alphabetically first name. This
yields for example 'EST5EDT' not 'America/New_York' for US eastern time.
On Windows, abandon the whole concept of inspecting the detailed behavior
of the system TZ library, because it doesn't bear inspection :-(. Instead
use a hardwired mapping table to select our zone name based on the
result of strftime %Z output. Windows code from Magnus Hagander.
There are still some things that need refinement; in particular I fear
that the recognized set of error condition names probably has little in
common with what Oracle recognizes. But it's a start.
>you will see changes for pg_config_paths.h and for thread safety. Can
>you look at those changes, merge them into bcc.mak. There might be
>other changes in there you want to add to bcc.mak too.
>
>
>
OK, having no M$ diff, I attach files src\interfaces\libpq\bcc32.mak and
src\interfaces\libpq\win32.h
Steve Holdoway
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
SAVEPOINT/RELEASE/ROLLBACK-TO syntax. (Alvaro)
Cause COMMIT of a failed transaction to report ROLLBACK instead of
COMMIT in its command tag. (Tom)
Fix a few loose ends in the nested-transactions stuff.
live backends, the archiver and stats processes never got sent a
kill signal. They'd eventually exit on their own, but not for awhile,
which is a bit annoying when you are trying to replace the executable
file on a platform that doesn't allow removal of busy executables.
Also, tweak main loop logic so that we will perform the background
tasks after select() returns EINTR.
recovery_target_timeline --- otherwise there is no path from the backup
to the requested timeline. This check was foreseen in the original
discussion but I forgot to implement it.
recovered from archive is not corrupt. It's not much but it will catch
one common problem, viz out-of-disk-space.
Also, force a WAL recovery scan when recovery.conf is present, even if
pg_control shows a clean shutdown. This allows recovery with a tar backup
that was taken with the postmaster shut down, as per complaint from
Mark Kirkwood.
timezone database for the system behavior we find ourselves in. Scan
backwards from current time and choose the zone that matches furthest
back. As per discussion a week or so back.
recovery more manageable. Also, undo recent change to add FILE_HEADER
and WASTED_SPACE records to XLOG; instead make the XLOG page header
variable-size with extra fields in the first page of an XLOG file.
This should fix the boundary-case bugs observed by Mark Kirkwood.
initdb forced due to change of XLOG representation.
* Fix help text ordering
* Add back --set-session-authorization to pg_dumpall. Updated the docs
for that. Updated help for that.
* Dump ALTER USER commands for the cluster owner ("pgsql"). These are
dumped AFTER the create user and create database commands in case the
permissions to do these have been revoked.
* Dump ALTER OWNER for public schema (because it's possible to change
it). This was done by adding TOC entries for the public schema, and
filtering them out at archiver time. I also save the owner in the TOC
entry just for the public schema.
* Suppress dumping single quotes around schema_path and DateStyle
options when they are set using ALTER USER or ALTER DATABASE. Added a
comment to the steps in guc.c to remind people to update that list.
* Fix dumping in --clean mode against a pre-7.3 server. It just sets
all drop statements to assume the public schema, allowing it to restore
without error.
* Cleaned up text output. eg. Don't output -- Tablespaces comment if
there are none. Same for groups and users.
* Make the commands to DELETE FROM pg_shadow and DELETE FROM pg_group
only be output when -c mode is enabled. I'm not sure why that hasn't
been done before?!?!
This should be good for application asap, after which I will start on
regression dumping 7.0-7.4 databases.
Christopher Kings-Lynne
force relcache rebuild for the other table as well as the column's
own table. Otherwise, already-cached foreign key triggers will stop
working. Per example from Alexander Pravking.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
* perl_useshrplib gets set to "yes" and not to "true". I assume it's set
to "true" on unix, so I left both.
* Need to translate backslashes into slashes
* The linker config coming out of perl was for MSVC and not for mingw
Magnus Hagander
> ---skiped---
> -P user name of account to register PostgreSQL server
> -U password of account to register PostgreSQL server
> ---skiped---
>
> I think that isn't right ;)
Claudio Natoli
AUTHORIZATION commands by default. Move all GRANT and REVOKE commands
to the end of the dump to avoid restore failures in several situations.
Bring back --use-set-session-authorization option to get previous SET
behaviour
Christopher Kings-Lyne
(.dylib format) on Mac OS X, while not messing up loadable modules for
the backend (which are the same kind of animal as a shared library on
every other platform, but not here). Also get the naming convention
to match OS X practice, viz libFOO.version.so not libFOO.so.version.
In support of that last, refactor code in Makefile.shlib to make it
easier to have platform-specific shlib naming conventions.
This patch is loosely based on the Fink project's current postgresql.patch.
Tested by yours truly on OS X 10.3.4; does anyone have 10.2.* to check
it on?
currently unapplied regarding spi_internal.c, makes some additional
fixes relating to return types, and also contains the fix for
preventing the use of insecure versions of Safe.pm.
There is one remaing return case that does not appear to work, namely
return of a composite directly in a select, i.e. if foo returns some
composite type, 'select * from foo()' works but 'select foo()' doesn't.
We will either fix that or document it as a limitation.
The function plperl_func_handler is a mess - I will try to get it
cleaned up (and split up) in a subsequent patch, time permitting.
Also, reiterating previous advice - this changes slightly the API for
spi_exec_query - the returned object has either 2 or 3 members: 'status'
(string) and 'proceesed' (int,- number of rows) and, if rows are
returned, 'rows' (array of tuple hashes).
Andrew Dunstan
> user must initialize the lock. The problem are concurrent "first" users
> - the pthread_mutex_t initialization must be synchronized.
> The current implementation is broken, the attached patches fixes that:
> mutex_initlock is a spinlock. If the pthread_mutex_t mutex is not
> initialized, then the spinlock is acquired, if the pthread_mutex_t is
> initialized if it's not yet initialized and then the spinlock is dropped.
Manfred Spraul
user must initialize the lock. The problem are concurrent "first" users
- the pthread_mutex_t initialization must be synchronized.
The current implementation is broken, the attached patches fixes that:
mutex_initlock is a spinlock. If the pthread_mutex_t mutex is not
initialized, then the spinlock is acquired, if the pthread_mutex_t is
initialized if it's not yet initialized and then the spinlock is
dropped.
Manfred Spraul
live in database or schema's default tablespace, as per today's discussion.
Also, remove some unused keywords from the grammar (PATH, PENDANT,
VERSION), and fix ALSO, which was added as a keyword but not added
to the keyword classification lists, thus making it worse-than-reserved.
probably should have been to begin with; this is to cover cases like
needing to recreate the per-db directory during WAL replay.
Also, fix heap_create to force pg_class.reltablespace to be zero instead
of the database's default tablespace; this makes the world safe for
CREATE DATABASE to handle all tables in the default tablespace alike,
as per previous discussion. And force pg_class.reltablespace to zero
when creating a relation without physical storage (eg, a view); this
avoids possibly having dangling references in this column after a
subsequent DROP TABLESPACE.
shift support code into heapam.c accordingly. This is in service of
soon-to-be-committed ALTER TABLE SET TABLESPACE code that will want to
use this same record type for both heaps and indexes.
Theoretically I should have forced initdb for this, but in practice there
is no change in xlog contents because CVS tip will never really emit this
record type anyhow...