Commit 5e6d8d2bb allowed parallel workers to execute parallel-safe
subplans, but it transmitted the query's entire list of subplans to
the worker(s). Since execMain.c blindly does ExecInitNode and later
ExecEndNode on every list element, this resulted in parallel-unsafe plan
nodes nonetheless getting started up and shut down in parallel workers.
That seems mostly harmless as far as core plan node types go (but
maybe not so much for Gather?). But it resulted in postgres_fdw
opening and then closing extra remote connections, and it's likely
that other non-parallel-safe FDWs or custom scan providers would have
worse reactions.
To fix, just make ExecSerializePlan replace parallel-unsafe subplans
with NULLs in the cut-down plan tree that it transmits to workers.
This relies on ExecInitNode and ExecEndNode to do nothing on NULL
input, but they do anyway. If anything else is touching the dropped
subplans in a parallel worker, that would be a bug to be fixed.
(This thus provides a strong guarantee that we won't try to do
something with a parallel-unsafe subplan in a worker.)
This is, I think, the last fix directly occasioned by Andreas Seltenreich's
bug report of a few days ago.
Tom Lane and Amit Kapila
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
We'd managed to avoid doing this so far, but it seems pretty obvious
that it would be forced on us some day, and this is much the cleanest
way of approaching the open problem that parallel-unsafe subplans are
being transmitted to parallel workers. Anyway there's no space cost
due to alignment considerations, and the time cost is pretty minimal
since we're just copying the flag from the corresponding Path node.
(At least in most cases ... some of the klugier spots in createplan.c
have to work a bit harder.)
In principle we could perhaps get rid of SubPlan.parallel_safe,
but I thought it better to keep that in case there are reasons to
consider a SubPlan unsafe even when its child plan is parallel-safe.
This patch doesn't actually do anything with the new flags, but
I thought I'd commit it separately anyway.
Note: although this touches outfuncs/readfuncs, there's no need for
a catversion bump because Plan trees aren't stored on disk.
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
This is the SQL standard-conforming variant of PostgreSQL's serial
columns. It fixes a few usability issues that serial columns have:
- CREATE TABLE / LIKE copies default but refers to same sequence
- cannot add/drop serialness with ALTER TABLE
- dropping default does not drop sequence
- need to grant separate privileges to sequence
- other slight weirdnesses because serial is some kind of special macro
Reviewed-by: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Currently, the only type of child relation is an "other member rel",
which is the child of a baserel, but in the future joins and even
upper relations may have child rels. To facilitate that, introduce
macros that test to test for particular RelOptKind values, and use
them in various places where they help to clarify the sense of a test.
(For example, a test may allow RELOPT_OTHER_MEMBER_REL either because
it intends to allow child rels, or because it intends to allow simple
rels.)
Also, remove find_childrel_top_parent, which will not work for a
child rel that is not a baserel. Instead, add a new RelOptInfo
member top_parent_relids to track the same kind of information in a
more generic manner.
Ashutosh Bapat, slightly tweaked by me. Review and testing of the
patch set from which this was taken by Rajkumar Raghuwanshi and Rafia
Sabih.
Discussion: http://postgr.es/m/CA+TgmoagTnF2yqR3PT2rv=om=wJiZ4-A+ATwdnriTGku1CLYxA@mail.gmail.com
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
Commit 45be99f8cd removed GatherPath's
num_workers field, but this is entirely bogus. Normally, a path's
parallel_workers flag is supposed to indicate the number of workers
that it wants, and should be 0 for a non-partial path. In that
commit, I mistakenly thought that GatherPath could also use that field
to indicate the number of workers that it would try to start, but
that's disastrous, because then it can propagate up to higher nodes in
the plan tree, which will then get incorrect rowcounts because the
parallel_workers flag is involved in computing those values. Repair
by putting the separate field back.
Report by Tomas Vondra. Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/f91b4a44-f739-04bd-c4b6-f135bd643669@2ndquadrant.com
copyObject() is declared to return void *, which allows easily assigning
the result independent of the input, but it loses all type checking.
If the compiler supports typeof or something similar, cast the result to
the input type. This creates a greater amount of type safety. In some
cases, where the result is assigned to a generic type such as Node * or
Expr *, new casts are now necessary, but in general casts are now
unnecessary in the normal case and indicate that something unusual is
happening.
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.czhttps://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
Add a column collprovider to pg_collation that determines which library
provides the collation data. The existing choices are default and libc,
and this adds an icu choice, which uses the ICU4C library.
The pg_locale_t type is changed to a union that contains the
provider-specific locale handles. Users of locale information are
changed to look into that struct for the appropriate handle to use.
Also add a collversion column that records the version of the collation
when it is created, and check at run time whether it is still the same.
This detects potentially incompatible library upgrades that can corrupt
indexes and other structures. This is currently only supported by
ICU-provided collations.
initdb initializes the default collation set as before from the `locale
-a` output but also adds all available ICU locales with a "-x-icu"
appended.
Currently, ICU-provided collations can only be explicitly named
collations. The global database locales are still always libc-provided.
ICU support is enabled by configure --with-icu.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Add functionality for a new subscription to copy the initial data in the
tables and then sync with the ongoing apply process.
For the copying, add a new internal COPY option to have the COPY source
data provided by a callback function. The initial data copy works on
the subscriber by receiving COPY data from the publisher and then
providing it locally into a COPY that writes to the destination table.
A WAL receiver can now execute full SQL commands. This is used here to
obtain information about tables and publications.
Several new options were added to CREATE and ALTER SUBSCRIPTION to
control whether and when initial table syncing happens.
Change pg_dump option --no-create-subscription-slots to
--no-subscription-connect and use the new CREATE SUBSCRIPTION
... NOCONNECT option for that.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Erik Rijkers <er@xs4all.nl>
Partitioned tables do not contain any data; only their unpartitioned
descendents need to be scanned. However, the partitioned tables still
need to be locked, even though they're not scanned. To make that
work, Append and MergeAppend relations now need to carry a list of
(unscanned) partitioned relations that must be locked, and InitPlan
must lock all partitioned result relations.
Aside from the obvious advantage of avoiding some work at execution
time, this has two other advantages. First, it may improve the
planner's decision-making in some cases since the empty relation
might throw things off. Second, it paves the way to getting rid of
the storage for partitioned tables altogether.
Amit Langote, reviewed by me.
Discussion: http://postgr.es/m/6837c359-45c4-8044-34d1-736756335a15@lab.ntt.co.jp
There is still some inconsistency with the error messages surrounding
foreign servers. Some use the word "foreign" and some don't. My
inclination is to remove all such uses of "foreign" on the basis that
the CREATE/ALTER/DROP SERVER commands don't use the word. However, that
is left for another day. In this patch I have kept to the existing usage
in the affected commands, which omits "foreign".
Anastasia Lubennikova, reviewed by Arthur Zakirov and Ashtosh Bapat.
Discussion: http://postgr.es/m/7c2ab9b8-388a-1ce0-23a3-7acf2a0ed3c6@postgrespro.ru
In DDL commands referring to an existing function, allow omitting the
argument list if the function name is unique in its schema, per SQL
standard.
This uses the same logic that the regproc type uses for finding
functions by name only.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
We used to export snapshots unconditionally in CREATE_REPLICATION_SLOT
in the replication protocol, but several upcoming patches want more
control over what happens.
Suppress snapshot export in pg_recvlogical, which neither needs nor can
use the exported snapshot. Since snapshot exporting can fail this
improves reliability.
This also paves the way for allowing the creation of replication slots
on standbys, which cannot export snapshots because they cannot allocate
new XIDs.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Like Gather, we spawn multiple workers and run the same plan in each
one; however, Gather Merge is used when each worker produces the same
output ordering and we want to preserve that output ordering while
merging together the streams of tuples from various workers. (In a
way, Gather Merge is like a hybrid of Gather and MergeAppend.)
This works out to a win if it saves us from having to perform an
expensive Sort. In cases where only a small amount of data would need
to be sorted, it may actually be faster to use a regular Gather node
and then sort the results afterward, because Gather Merge sometimes
needs to wait synchronously for tuples whereas a pure Gather generally
doesn't. But if this avoids an expensive sort then it's a win.
Rushabh Lathia, reviewed and tested by Amit Kapila, Thomas Munro,
and Neha Sharma, and reviewed and revised by me.
Discussion: http://postgr.es/m/CAGPqQf09oPX-cQRpBKS0Gq49Z+m6KBxgxd_p9gX8CKk_d75HoQ@mail.gmail.com
The index is scanned by a single process, but then all cooperating
processes can iterate jointly over the resulting set of heap blocks.
In the future, we might also want to support using a parallel bitmap
index scan to set up for a parallel bitmap heap scan, but that's a
job for another day.
Dilip Kumar, with some corrections and cosmetic changes by me. The
larger patch set of which this is a part has been reviewed and tested
by (at least) Andres Freund, Amit Khandekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, Thomas Munro, and me.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
When a shared iterator is used, each call to tbm_shared_iterate()
returns a result that has not yet been returned to any process
attached to the shared iterator. In other words, each cooperating
processes gets a disjoint subset of the full result set, but all
results are returned exactly once.
This is infrastructure for parallel bitmap heap scan.
Dilip Kumar. The larger patch set of which this is a part has been
reviewed and tested by (at least) Andres Freund, Amit Khandekar,
Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and Thomas Munro.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
The old function took function name and function argument list as
separate arguments. Now that all function signatures are passed around
as ObjectWithArgs structs, this is no longer necessary and can be
replaced by a function that takes ObjectWithArgs directly. Similarly
for aggregates and operators.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
In simpler times, it might have worked to refer to all kinds of objects
by a list of name components and an optional argument list. But this
doesn't work for all objects, which has resulted in a collection of
hacks to place various other nodes types into these fields, which have
to be unpacked at the other end. This makes it also weird to represent
lists of such things in the grammar, because they would have to be lists
of singleton lists, to make the unpacking work consistently. The other
problem is that keeping separate name and args fields makes it awkward
to deal with lists of functions.
Change that by dropping the objargs field and have objname, renamed to
object, be a generic Node, which can then be flexibly assigned and
managed using the normal Node mechanisms. In many cases it will still
be a List of names, in some cases it will be a string Value, for types
it will be the existing Typename, for functions it will now use the
existing ObjectWithArgs node type. Some of the more obscure object
types still use somewhat arbitrary nested lists.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This makes the handling of operators similar to that of functions and
aggregates.
Rename node FuncWithArgs to ObjectWithArgs, to reflect the expanded use.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This makes it consistent with the usage in opclass_item.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The default general purpose aset.c style memory context is not a great
choice for allocations that are all going to be evenly sized,
especially when those objects aren't small, and have varying
lifetimes. There tends to be a lot of fragmentation, larger
allocations always directly go to libc rather than have their cost
amortized over several pallocs.
These problems lead to the introduction of ad-hoc slab allocators in
reorderbuffer.c. But it turns out that the simplistic implementation
leads to problems when a lot of objects are allocated and freed, as
aset.c is still the underlying implementation. Especially freeing can
easily run into O(n^2) behavior in aset.c.
While the O(n^2) behavior in aset.c can, and probably will, be
addressed, custom allocators for this behavior are more efficient
both in space and time.
This allocator is for evenly sized allocations, and supports both
cheap allocations and freeing, without fragmenting significantly. It
does so by allocating evenly sized blocks via malloc(), and carves
them into chunks that can be used for allocations. In order to
release blocks to the OS as early as possible, chunks are allocated
from the fullest block that still has free objects, increasing the
likelihood of a block being entirely unused.
A subsequent commit uses this in reorderbuffer.c, but a further
allocator is needed to resolve the performance problems triggering
this work.
There likely are further potentialy uses of this allocator besides
reorderbuffer.c.
There's potential further optimizations of the new slab.c, in
particular the array of freelists could be replaced by a more
intelligent structure - but for now this looks more than good enough.
Author: Tomas Vondra, editorialized by Andres Freund
Reviewed-By: Andres Freund, Petr Jelinek, Robert Haas, Jim Nasby
Discussion: https://postgr.es/m/d15dff83-0b37-28ed-0809-95a5cc7292ad@2ndquadrant.com
This is expected to be useful mostly when performing such scans in
parallel, because in that case it allows (in combination with commit
acf555bc53) nodes below a Gather to get
control just before the DSM segment goes away.
KaiGai Kohei, except that I rewrote the documentation. Reviewed by
Claudio Freire.
Discussion: http://postgr.es/m/CADyhKSXJK0jUJ8rWv4AmKDhsUh124_rEn39eqgfC5D8fu6xVuw@mail.gmail.com
With this change, you can see the query that a parallel worker is
executing in pg_stat_activity, and if the worker crashes you can
see what query it was executing when it crashed.
Rafia Sabih, reviewed by Kuntal Ghosh and Amit Kapila and slightly
revised by me.
Commit 5262f7a4fc added similar support
for parallel index scans; this extends that work to index-only scans.
As with parallel index scans, this requires support from the index AM,
so currently parallel index-only scans will only be possible for btree
indexes.
Rafia Sabih, reviewed and tested by Rahila Syed, Tushar Ahuja,
and Amit Kapila
Discussion: http://postgr.es/m/CAOGQiiPEAs4C=TBp0XShxBvnWXuzGL2u++Hm1=qnCpd6_Mf8Fw@mail.gmail.com
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
The core of the functionality was already implemented when
pg_import_system_collations was added. This just exposes it as an
option in the SQL command.
This doesn't do anything to make Param nodes anything other than
parallel-restricted, so this only helps with uncorrelated subplans,
and it's not necessarily very cheap because each worker will run the
subplan separately (just as a Hash Join will build a separate copy of
the hash table in each participating process), but it's a first step
toward supporting cases that are more likely to help in practice, and
is occasionally useful on its own.
Amit Kapila, reviewed and tested by Rafia Sabih, Dilip Kumar, and
me.
Discussion: http://postgr.es/m/CAA4eK1+e8Z45D2n+rnDMDYsVEb5iW7jqaCH_tvPMYau=1Rru9w@mail.gmail.com
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
The new function allows to cast from one NodeTag based type to
another, while asserting that the conversion is valid. This replaces
the common pattern of doing a cast and a Assert(IsA(ptr, type))
close-by.
As this seems likely to be used pervasively, we decided to backpatch
this change the addition of this macro. Otherwise backpatched fixes
are more likely not to work on back-branches.
On branches before 9.6, where we do not yet rely on inline functions
being available, the type assertion is only performed if PG_USE_INLINE
support is detected. The cast obviously is performed regardless.
For the benefit of verifying the macro compiles in the back-branches,
this commit contains a single use of the new macro. On master, a
somewhat larger conversion will be committed separately.
Author: Peter Eisentraut and Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Backpatch: 9.2-
We've accumulated quite a bit of stuff with which pgindent is not
quite happy in this code; clean it up to provide a less-annoying base
for future pgindent runs.
Since 69f4b9c plain expression evaluation (and thus normal projection)
can't return sets of tuples anymore. Thus remove code dealing with
that possibility.
This will require adjustments in external code using
ExecEvalExpr()/ExecProject() - that should neither be hard nor very
common.
Author: Andres Freund and Tom Lane
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
Evaluation of set returning functions (SRFs_ in the targetlist (like SELECT
generate_series(1,5)) so far was done in the expression evaluation (i.e.
ExecEvalExpr()) and projection (i.e. ExecProject/ExecTargetList) code.
This meant that most executor nodes performing projection, and most
expression evaluation functions, had to deal with the possibility that an
evaluated expression could return a set of return values.
That's bad because it leads to repeated code in a lot of places. It also,
and that's my (Andres's) motivation, made it a lot harder to implement a
more efficient way of doing expression evaluation.
To fix this, introduce a new executor node (ProjectSet) that can evaluate
targetlists containing one or more SRFs. To avoid the complexity of the old
way of handling nested expressions returning sets (e.g. having to pass up
ExprDoneCond, and dealing with arguments to functions returning sets etc.),
those SRFs can only be at the top level of the node's targetlist. The
planner makes sure (via split_pathtarget_at_srfs()) that SRF evaluation is
only necessary in ProjectSet nodes and that SRFs are only present at the
top level of the node's targetlist. If there are nested SRFs the planner
creates multiple stacked ProjectSet nodes. The ProjectSet nodes always get
input from an underlying node.
We also discussed and prototyped evaluating targetlist SRFs using ROWS
FROM(), but that turned out to be more complicated than we'd hoped.
While moving SRF evaluation to ProjectSet would allow to retain the old
"least common multiple" behavior when multiple SRFs are present in one
targetlist (i.e. continue returning rows until all SRFs are at the end of
their input at the same time), we decided to instead only return rows till
all SRFs are exhausted, returning NULL for already exhausted ones. We
deemed the previous behavior to be too confusing, unexpected and actually
not particularly useful.
As a side effect, the previously prohibited case of multiple set returning
arguments to a function, is now allowed. Not because it's particularly
desirable, but because it ends up working and there seems to be no argument
for adding code to prohibit it.
Currently the behavior for COALESCE and CASE containing SRFs has changed,
returning multiple rows from the expression, even when the SRF containing
"arm" of the expression is not evaluated. That's because the SRFs are
evaluated in a separate ProjectSet node. As that's quite confusing, we're
likely to instead prohibit SRFs in those places. But that's still being
discussed, and the code would reside in places not touched here, so that's
a task for later.
There's a lot of, now superfluous, code dealing with set return expressions
around. But as the changes to get rid of those are verbose largely boring,
it seems better for readability to keep the cleanup as a separate commit.
Author: Tom Lane and Andres Freund
Discussion: https://postgr.es/m/20160822214023.aaxz5l4igypowyri@alap3.anarazel.de
In an RLS query, we must ensure that security filter quals are evaluated
before ordinary query quals, in case the latter contain "leaky" functions
that could expose the contents of sensitive rows. The original
implementation of RLS planning ensured this by pushing the scan of a
secured table into a sub-query that it marked as a security-barrier view.
Unfortunately this results in very inefficient plans in many cases, because
the sub-query cannot be flattened and gets planned independently of the
rest of the query.
To fix, drop the use of sub-queries to enforce RLS qual order, and instead
mark each qual (RestrictInfo) with a security_level field establishing its
priority for evaluation. Quals must be evaluated in security_level order,
except that "leakproof" quals can be allowed to go ahead of quals of lower
security_level, if it's helpful to do so. This has to be enforced within
the ordering of any one list of quals to be evaluated at a table scan node,
and we also have to ensure that quals are not chosen for early evaluation
(i.e., use as an index qual or TID scan qual) if they're not allowed to go
ahead of other quals at the scan node.
This is sufficient to fix the problem for RLS quals, since we only support
RLS policies on simple tables and thus RLS quals will always exist at the
table scan level only. Eventually these qual ordering rules should be
enforced for join quals as well, which would permit improving planning for
explicit security-barrier views; but that's a task for another patch.
Note that FDWs would need to be aware of these rules --- and not, for
example, send an insecure qual for remote execution --- but since we do
not yet allow RLS policies on foreign tables, the case doesn't arise.
This will need to be addressed before we can allow such policies.
Patch by me, reviewed by Stephen Frost and Dean Rasheed.
Discussion: https://postgr.es/m/8185.1477432701@sss.pgh.pa.us
This patch makes several changes that improve the consistency of
representation of lists of statements. It's always been the case
that the output of parse analysis is a list of Query nodes, whatever
the types of the individual statements in the list. This patch brings
similar consistency to the outputs of raw parsing and planning steps:
* The output of raw parsing is now always a list of RawStmt nodes;
the statement-type-dependent nodes are one level down from that.
* The output of pg_plan_queries() is now always a list of PlannedStmt
nodes, even for utility statements. In the case of a utility statement,
"planning" just consists of wrapping a CMD_UTILITY PlannedStmt around
the utility node. This list representation is now used in Portal and
CachedPlan plan lists, replacing the former convention of intermixing
PlannedStmts with bare utility-statement nodes.
Now, every list of statements has a consistent head-node type depending
on how far along it is in processing. This allows changing many places
that formerly used generic "Node *" pointers to use a more specific
pointer type, thus reducing the number of IsA() tests and casts needed,
as well as improving code clarity.
Also, the post-parse-analysis representation of DECLARE CURSOR is changed
so that it looks more like EXPLAIN, PREPARE, etc. That is, the contained
SELECT remains a child of the DeclareCursorStmt rather than getting flipped
around to be the other way. It's now true for both Query and PlannedStmt
that utilityStmt is non-null if and only if commandType is CMD_UTILITY.
That allows simplifying a lot of places that were testing both fields.
(I think some of those were just defensive programming, but in many places,
it was actually necessary to avoid confusing DECLARE CURSOR with SELECT.)
Because PlannedStmt carries a canSetTag field, we're also able to get rid
of some ad-hoc rules about how to reconstruct canSetTag for a bare utility
statement; specifically, the assumption that a utility is canSetTag if and
only if it's the only one in its list. While I see no near-term need for
relaxing that restriction, it's nice to get rid of the ad-hocery.
The API of ProcessUtility() is changed so that what it's passed is the
wrapper PlannedStmt not just the bare utility statement. This will affect
all users of ProcessUtility_hook, but the changes are pretty trivial; see
the affected contrib modules for examples of the minimum change needed.
(Most compilers should give pointer-type-mismatch warnings for uncorrected
code.)
There's also a change in the API of ExplainOneQuery_hook, to pass through
cursorOptions instead of expecting hook functions to know what to pick.
This is needed because of the DECLARE CURSOR changes, but really should
have been done in 9.6; it's unlikely that any extant hook functions
know about using CURSOR_OPT_PARALLEL_OK.
Finally, teach gram.y to save statement boundary locations in RawStmt
nodes, and pass those through to Query and PlannedStmt nodes. This allows
more intelligent handling of cases where a source query string contains
multiple statements. This patch doesn't actually do anything with the
information, but a follow-on patch will. (Passing this information through
cleanly is the true motivation for these changes; while I think this is all
good cleanup, it's unlikely we'd have bothered without this end goal.)
catversion bump because addition of location fields to struct Query
affects stored rules.
This patch is by me, but it owes a good deal to Fabien Coelho who did
a lot of preliminary work on the problem, and also reviewed the patch.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1612200926310.29821@lancre
After a tuple is routed to a partition, it has been converted from the
root table's row type to the partition's row type. ExecConstraints
needs to report the failure using the original tuple and the parent's
tuple descriptor rather than the ones for the selected partition.
Amit Langote
Commit 2ac3ef7a01 added a TupleTapleSlot
for partition tuple slot to EState (es_partition_tuple_slot) but it's
more logical to have it as part of ModifyTableState
(mt_partition_tuple_slot) and CopyState (partition_tuple_slot).
Discussion: http://postgr.es/m/1bd459d9-4c0c-197a-346e-e5e59e217d97@lab.ntt.co.jp
Amit Langote, per a gripe from me
Commit f0e44751d added new node tags at a place in the tag numbering
where there was no daylight left before the next hard-coded number,
resulting in some duplicate tag assignments. This doesn't seem to have
caused any big problem so far, but it's surely trouble waiting to happen.
We could adjust the manually assigned breakpoints to make more room,
but that just leaves the same hazard waiting to strike again in future.
What seems like a better idea is to get rid of the manual assignments
and leave NodeTags to be automatically assigned, consecutively from one
on up. This means that any change in the tag list forces a backend-wide
recompile, but realistically that's usually needed anyway.
Discussion: https://postgr.es/m/29670.1482942811@sss.pgh.pa.us
Most code was casting this through a generic Node. By declaring
everything as RoleSpec appropriately, we can remove a bunch of casts and
ad-hoc node type checking.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Now that it has only INH_NO and INH_YES values, it's just weird that
it's not a plain bool, so make it that way.
Also rename RangeVar.inhOpt to "inh", to be like RangeTblEntry.inh.
My recollection is that we gave it a different name specifically because
it had a different representation than the derived bool value, but it
no longer does. And this is a good forcing function to be sure we
catch any places that are affected by the change.
Bump catversion because of possible effect on stored RangeVar nodes.
I'm not exactly convinced that we ever store RangeVar on disk, but
we have a readfuncs function for it, so be cautious. (If we do do so,
then commit e13486eba was in error not to bump catversion.)
Follow-on to commit e13486eba.
Discussion: http://postgr.es/m/CA+TgmoYe+EG7LdYX6pkcNxr4ygkP4+A=jm9o-CPXyOvRiCNwaQ@mail.gmail.com
The previous coding failed to work correctly when we have a
multi-level partitioned hierarchy where tables at successive levels
have different attribute numbers for the partition key attributes. To
fix, have each PartitionDispatch object store a standalone
TupleTableSlot initialized with the TupleDesc of the corresponding
partitioned table, along with a TupleConversionMap to map tuples from
the its parent's rowtype to own rowtype. After tuple routing chooses
a leaf partition, we must use the leaf partition's tuple descriptor,
not the root table's. To that end, a dedicated TupleTableSlot for
tuple routing is now allocated in EState.
Amit Langote
When the input value to a CoerceToDomain expression node is a read-write
expanded datum, we should pass a read-only pointer to any domain CHECK
expressions and then return the original read-write pointer as the
expression result. Previously we were blindly passing the same pointer to
all the consumers of the value, making it possible for a function in CHECK
to modify or even delete the expanded value. (Since a plpgsql function
will absorb a passed-in read-write expanded array as a local variable
value, it will in fact delete the value on exit.)
A similar hazard of passing the same read-write pointer to multiple
consumers exists in domain_check() and in ExecEvalCase, so fix those too.
The fix requires adding MakeExpandedObjectReadOnly calls at the appropriate
places, which is simple enough except that we need to get the data type's
typlen from somewhere. For the domain cases, solve this by redefining
DomainConstraintRef.tcache as okay for callers to access; there wasn't any
reason for the original convention against that, other than not wanting the
API of typcache.c to be any wider than it had to be. For CASE, there's
no good solution except to add a syscache lookup during executor start.
Per bug #14472 from Marcos Castedo. Back-patch to 9.5 where expanded
values were introduced.
Discussion: https://postgr.es/m/15225.1482431619@sss.pgh.pa.us
Commit 5dfc198146 introduced the use
of a new type of hash table with linear reprobing for hash aggregates.
Such a hash table behaves very poorly if keys are inserted in hash
order, which does in fact happen in the case where a query use a
Finalize HashAggregate node fed (via Gather) by a Partial
HashAggregate node. In fact, queries with this type of plan tend
to run effectively forever.
Fix that by seeding the hash value differently in each worker
(and in the leader, if it participates).
Andres Freund and Robert Haas
This allows creating temporary replication slots that are removed
automatically at the end of the session or on error.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
expandRTE() and get_rte_attribute_type() reported the exprType() and
exprTypmod() values of the expressions in the first row of the VALUES as
being the column type/typmod returned by the VALUES RTE. That's fine for
the data type, since we coerce all expressions in a column to have the same
common type. But we don't coerce them to have a common typmod, so it was
possible for rows after the first one to return values that violate the
claimed column typmod. This leads to the incorrect result seen in bug
#14448 from Hassan Mahmood, as well as some other corner-case misbehaviors.
The desired behavior is the same as we use in other type-unification
cases: report the common typmod if there is one, but otherwise return -1
indicating no particular constraint. It's cheap for transformValuesClause
to determine the common typmod while transforming a multi-row VALUES, but
it'd be less cheap for expandRTE() and get_rte_attribute_type() to
re-determine that info every time they're asked --- possibly a lot less
cheap, if the VALUES has many rows. Therefore, the best fix is to record
the common typmods explicitly in a list in the VALUES RTE, as we were
already doing for column collations. This looks quite a bit like what
we're doing for CTE RTEs, so we can save a little bit of space and code by
unifying the representation for those two RTE types. They both now share
coltypes/coltypmods/colcollations fields. (At some point it might seem
desirable to populate those fields for all RTE types; but right now it
looks like constructing them for other RTE types would add more code and
cycles than it would save.)
The RTE change requires a catversion bump, so this fix is only usable
in HEAD. If we fix this at all in the back branches, the patch will
need to look quite different.
Report: https://postgr.es/m/20161205143037.4377.60754@wrigleys.postgresql.org
Discussion: https://postgr.es/m/27429.1480968538@sss.pgh.pa.us
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
We have had support for restrictive RLS policies since 9.5, but they
were only available through extensions which use the appropriate hooks.
This adds support into the grammer, catalog, psql and pg_dump for
restrictive RLS policies, thus reducing the cases where an extension is
necessary.
In passing, also move away from using "AND"d and "OR"d in comments.
As pointed out by Alvaro, it's not really appropriate to attempt
to make verbs out of "AND" and "OR", so reword those comments which
attempted to.
Reviewed By: Jeevan Chalke, Dean Rasheed
Discussion: https://postgr.es/m/20160901063404.GY4028@tamriel.snowman.net
So far the hashtable stored representative tuples in the form of its
input slot, with all columns in the hashtable that are not
needed (i.e. not grouped upon or functionally dependent) set to NULL.
Thats good for saving memory, but it turns out that having tuples full
of NULL isn't free. slot_deform_tuple is faster if there's no NULL
bitmap even if no NULLs are encountered, and skipping over leading NULLs
isn't free.
So compute a separate tuple descriptor that only contains the needed
columns. As columns have already been moved in/out the slot for the
hashtable that does not imply additional per-row overhead.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
Previously we did a ExecProject() for each individual aggregate
argument. That turned out to be a performance bottleneck in queries with
multiple aggregates.
Doing all the argument computations in one ExecProject() is quite a bit
cheaper because ExecProject's fastpath can do the work at once in a
relatively tight loop, and because it can get all the required columns
with a single slot_getsomeattr and save some other redundant setup
costs.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
Discussion: https://postgr.es/m/20161103110721.h5i5t5saxfk5eeik@alap3.anarazel.de
Be sure to pull up the subquery's hasRowSecurity flag when flattening a
subquery in pull_up_simple_subquery(). This isn't a bug today because
we don't look at the hasRowSecurity flag during planning, but it could
easily be a bug tomorrow.
Likewise, make rewriteRuleAction() pull up the hasRowSecurity flag when
absorbing RTEs from a rule action. This isn't a bug either, for the
opposite reason: the flag should never be set yet. But again, it seems
like good future proofing.
Add a comment explaining why rewriteTargetView() should *not* set
hasRowSecurity when adding stuff to securityQuals.
Improve some nearby comments about securityQuals processing, and document
that field more completely in parsenodes.h.
Patch by me, analysis by Dean Rasheed.
Discussion: <CAEZATCXZ8tb2DV6f=bkhsMV6u_gRcZ0CZBw2J-qU84RxSukZog@mail.gmail.com>
This is infrastructure for the complete SQL standard feature. No
support is included at this point for execution nodes or PLs. The
intent is to add that soon.
As this patch leaves things, standard syntax can create tuplestores
to contain old and/or new versions of rows affected by a statement.
References to these tuplestores are in the TriggerData structure.
C triggers can access the tuplestores directly, so they are usable,
but they cannot yet be referenced within a SQL statement.
The more efficient hashtable speeds up hash-aggregations with more than
a few hundred groups significantly. Improvements of over 120% have been
measured.
Due to the the different hash table queries that not fully
determined (e.g. GROUP BY without ORDER BY) may change their result
order.
The conversion is largely straight-forward, except that, due to the
static element types of simplehash.h type hashes, the additional data
some users store in elements (e.g. the per-group working data for hash
aggregaters) is now stored in TupleHashEntryData->additional. The
meaning of BuildTupleHashTable's entrysize (renamed to additionalsize)
has been changed to only be about the additionally stored size. That
size is only used for the initial sizing of the hash-table.
Reviewed-By: Tomas Vondra
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
This function has no direct callers at present, but it's convenient for
manual use in a debugger, rather than having to inspect memory and do
bit-counting in your head.
In passing, get rid of useless outBitmapset() wrapper around
_outBitmapset(); let's just export the function that does the work.
Likewise for outToken().
Ashutosh Bapat, tweaked a bit by me
Discussion: <CAFjFpRdiht8e1HTVirbubr4YzaON5iZTzFJjq909y4sU8M_6eA@mail.gmail.com>
Teach the parser to reject misplaced set-returning functions during parse
analysis using p_expr_kind, in much the same way as we do for aggregates
and window functions (cf commit eaccfded9). While this isn't complete
(it misses nesting-based restrictions), it's much better than the previous
error reporting for such cases, and it allows elimination of assorted
ad-hoc expression_returns_set() error checks. We could add nesting checks
later if it seems important to catch all cases at parse time.
There is one case the parser will now throw error for although previous
versions allowed it, which is SRFs in the tlist of an UPDATE. That never
behaved sensibly (since it's ill-defined which generated row should be
used to perform the update) and it's hard to see why it should not be
treated as an error. It's a release-note-worthy change though.
Also, add a new Query field hasTargetSRFs reporting whether there are
any SRFs in the targetlist (including GROUP BY/ORDER BY expressions).
The parser can now set that basically for free during parse analysis,
and we can use it in a number of places to avoid expression_returns_set
searches. (There will be more such checks soon.) In some places, this
allows decontorting the logic since it's no longer expensive to check for
SRFs in the tlist --- so I made the checks parallel to the handling of
hasAggs/hasWindowFuncs wherever it seemed appropriate.
catversion bump because adding a Query field changes stored rules.
Andres Freund and Tom Lane
Discussion: <24639.1473782855@sss.pgh.pa.us>
lockdefs.h was only split from lock.h relatively recently, and
represents a minimal subset of the old lock.h. heapam.h only needs
that smaller subset, so adjust it to include only that. This requires
some corresponding adjustments elsewhere.
Peter Geoghegan
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Discussion: <CAO=2mx6uvgPaPDf-rHqG8=1MZnGyVDMQeh8zS4euRyyg4D35OQ@mail.gmail.com>
Add a location field to the DefElem struct, used to parse many utility
commands. Update various error messages to supply error position
information.
To propogate the error position information in a more systematic way,
create a ParseState in standard_ProcessUtility() and pass that to
interested functions implementing the utility commands. This seems
better than passing the query string and then reassembling a parse state
ad hoc, which violates the encapsulation of the ParseState type.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
We need to scan the whole parse tree for parallel-unsafe functions.
If there are none, we'll later need to determine whether particular
subtrees contain any parallel-restricted functions. The previous coding
retained no knowledge from the first scan, even though this is very
wasteful in the common case where the query contains only parallel-safe
functions. We can bypass all of the later scans by remembering that fact.
This provides a small but measurable speed improvement when the case
applies, and shouldn't cost anything when it doesn't.
Patch by me, reviewed by Robert Haas
Discussion: <3740.1471538387@sss.pgh.pa.us>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
Now that we've nailed down the principle that NullTest with !argisrow
is fully equivalent to SQL's IS [NOT] DISTINCT FROM NULL, let's teach
the parser about it. This produces a slightly more compact parse tree
and is much more amenable to optimization than a DistinctExpr, since
the planner knows a good deal about NullTest and next to nothing about
DistinctExpr.
I'm not sure that there are all that many queries in the wild that could
be improved by this, but at least one source of such cases is the patch
just made to postgres_fdw to emit IS [NOT] DISTINCT FROM NULL when
IS [NOT] NULL isn't semantically correct.
No back-patch, since to the extent that this does affect planning results,
it might be considered undesirable plan destabilization.
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
Commit 3fc6e2d7f5 introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
It's rather silly to make a separate pass over the tlist + HAVING qual,
and a separate set of visits to the syscache, when get_agg_clause_costs
already has all the required information in hand. This nets out as less
code as well as fewer cycles.
The original coding had three separate booleans representing partial
aggregation behavior, which was confusing, unreadable, and error-prone,
not least because the booleans weren't always listed in the same order.
It was also inadequate for the allegedly-desirable future extension to
support intermediate partial aggregation, because we'd need separate
markers for serialization and deserialization in such a case.
Merge these bools into an enum "AggSplit" to provide symbolic names for
the supported operating modes (and document what those are). By assigning
the values of the enum constants carefully, we can treat AggSplit values
as options bitmasks so that tests of what to do aren't noticeably more
expensive than before.
While at it, get rid of Aggref.aggoutputtype. That's not needed since
commit 59a3795c2 got rid of setrefs.c's special-purpose Aggref comparison
code, and it likewise seemed more confusing than helpful.
Assorted comment cleanup as well (there's still more that I want to do
in that line).
catversion bump for change in Aggref node contents. Should be the last
one for partial-aggregation changes.
Discussion: <29309.1466699160@sss.pgh.pa.us>
The original upper-planner-pathification design (commit 3fc6e2d7f5)
assumed that we could always determine during Path formation whether or not
we would need a Result plan node to perform projection of a targetlist.
That turns out not to work very well, though, because createplan.c still
has some responsibilities for choosing the specific target list associated
with sorting/grouping nodes (in particular it might choose to add resjunk
columns for sorting). We might not ever refactor that --- doing so would
push more work into Path formation, which isn't attractive --- and we
certainly won't do so for 9.6. So, while create_projection_path and
apply_projection_to_path can tell for sure what will happen if the subpath
is projection-capable, they can't tell for sure when it isn't. This is at
least a latent bug in apply_projection_to_path, which might think it can
apply a target to a non-projecting node when the node will end up computing
something different.
Also, I'd tied the creation of a ProjectionPath node to whether or not a
Result is needed, but it turns out that we sometimes need a ProjectionPath
node anyway to avoid modifying a possibly-shared subpath node. Callers had
to use create_projection_path for such cases, and we added code to them
that knew about the potential omission of a Result node and attempted to
adjust the cost estimates for that. That was uncertainly correct and
definitely ugly/unmaintainable.
To fix, have create_projection_path explicitly check whether a Result
is needed and adjust its cost estimate accordingly, though it creates
a ProjectionPath in either case. apply_projection_to_path is now mostly
just an optimized version that can avoid creating an extra Path node when
the input is known to not be shared with any other live path. (There
is one case that create_projection_path doesn't handle, which is pushing
parallel-safe expressions below a Gather node. We could make it do that
by duplicating the GatherPath, but there seems no need as yet.)
create_projection_plan still has to recheck the tlist-match condition,
which means that if the matching situation does get changed by createplan.c
then we'll have made a slightly incorrect cost estimate. But there seems
no help for that in the near term, and I doubt it occurs often enough,
let alone would change planning decisions often enough, to be worth
stressing about.
I added a "dummypp" field to ProjectionPath to track whether
create_projection_path thinks a Result is needed. This is not really
necessary as-committed because create_projection_plan doesn't look at the
flag; but it seems like a good idea to remember what we thought when
forming the cost estimate, if only for debugging purposes.
In passing, get rid of the target_parallel parameter added to
apply_projection_to_path by commit 54f5c5150. I don't think that's a good
idea because it involves callers in what should be an internal decision,
and opens us up to missing optimization opportunities if callers think they
don't need to provide a valid flag, as most don't. For the moment, this
just costs us an extra has_parallel_hazard call when planning a Gather.
If that starts to look expensive, I think a better solution would be to
teach PathTarget to carry/cache knowledge of parallel-safety of its
contents.
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
When doing partial aggregation, the args list of the upper (combining)
Aggref node is replaced by a Var representing the output of the partial
aggregation steps, which has either the aggregate's transition data type
or a serialized representation of that. However, nodeAgg.c blindly
continued to use the args list as an indication of the user-level argument
types. This broke resolution of polymorphic transition datatypes at
executor startup (though it accidentally failed to fail for the ANYARRAY
case, which is likely the only one anyone had tested). Moreover, the
constructed FuncExpr passed to the finalfunc contained completely wrong
information, which would have led to bogus answers or crashes for any case
where the finalfunc examined that information (which is only likely to be
with polymorphic aggregates using a non-polymorphic transition type).
As an independent bug, apply_partialaggref_adjustment neglected to resolve
a polymorphic transition datatype before assigning it as the output type
of the lower-level Aggref node. This again accidentally failed to fail
for ANYARRAY but would be unlikely to work in other cases.
To fix the first problem, record the user-level argument types in a
separate OID-list field of Aggref, and look to that rather than the args
list when asking what the argument types were. (It turns out to be
convenient to include any "direct" arguments in this list too, although
those are not currently subject to being overwritten.)
Rather than adding yet another resolve_aggregate_transtype() call to fix
the second problem, add an aggtranstype field to Aggref, and store the
resolved transition type OID there when the planner first computes it.
(By doing this in the planner and not the parser, we can allow the
aggregate's transition type to change from time to time, although no DDL
support yet exists for that.) This saves nothing of consequence for
simple non-polymorphic aggregates, but for polymorphic transition types
we save a catalog lookup during executor startup as well as several
planner lookups that are new in 9.6 due to parallel query planning.
In passing, fix an error that was introduced into count_agg_clauses_walker
some time ago: it was applying exprTypmod() to something that wasn't an
expression node at all, but a TargetEntry. exprTypmod silently returned
-1 so that there was not an obvious failure, but this broke the intended
sensitivity of aggregate space consumption estimates to the typmod of
varchar and similar data types. This part needs to be back-patched.
Catversion bump due to change of stored Aggref nodes.
Discussion: <8229.1466109074@sss.pgh.pa.us>
If you really want to vacuum every single page in the relation,
regardless of apparent visibility status or anything else, you can use
this option. In previous releases, this behavior could be achieved
using VACUUM (FREEZE), but because we can now recognize all-frozen
pages as not needing to be frozen again, that no longer works. There
should be no need for routine use of this option, but maybe bugs or
disaster recovery will necessitate its use.
Patch by me, reviewed by Andres Freund.
The struct definition for PathTarget specifies that a NULL sortgrouprefs
pointer means no sortgroupref labels. While it's likely that there
should always be at least one labeled column in the places that were
unconditionally fetching through the pointer, it seems wiser to adhere to
the data structure specification and test first. Add a macro to make this
convenient. Per experimentation with running the regression tests with a
very small parallelization threshold --- the crash I observed may well
represent a bug elsewhere, but still this coding was not very robust.
Report: <20756.1465834072@sss.pgh.pa.us>
Commit b12fd41c6 added a "reltarget_has_non_vars" field to RelOptInfo,
but failed to maintain it accurately. Since its only purpose was to skip
calls to has_parallel_hazard() in the simple case where a rel's targetlist
is all Vars, and that call is really pretty cheap in that case anyway, it
seems like this is just a case of premature optimization. Let's drop the
flag and do the calls unconditionally until it's proven that we need more
smarts here.
As noted by Andres Freund, we'd accumulated quite a few similar functions
in clauses.c that examine all functions in an expression tree to see if
they satisfy some boolean test. Reduce the duplication by inventing a
function check_functions_in_node() that applies a simple callback function
to each SQL function OID appearing in a given expression node. This also
fixes some arguable oversights; for example, contain_mutable_functions()
did not check aggregate or window functions for mutability. I doubt that
that represents a live bug at the moment, because we don't really consider
mutability for aggregates; but it might someday be one.
I chose to put check_functions_in_node() in nodeFuncs.c because it seemed
like other modules might wish to use it in future. That in turn forced
moving set_opfuncid() et al into nodeFuncs.c, as the alternative was for
nodeFuncs.c to depend on optimizer/setrefs.c which didn't seem very clean.
In passing, teach contain_leaked_vars_walker() about a few more expression
node types it can safely look through, and improve the rather messy and
undercommented code in has_parallel_hazard_walker().
Discussion: <20160527185853.ziol2os2zskahl7v@alap3.anarazel.de>
Such paths are unsafe. To make it cheaper to detect when this case
applies, track whether a relation's default PathTarget contains any
non-Vars. In most cases, the answer will be no, which enables us to
determine cheaply that the target list for a proposed path is
parallel-safe. However, subquery pull-up can create cases that
require us to inspect the target list more carefully.
Amit Kapila, reviewed by me.
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
The way that PartialAggregate and FinalizeAggregate plan nodes were
displaying output columns before was bogus. Now, FinalizeAggregate
produces the same outputs as an Aggregate would have produced, while
PartialAggregate produces each of those outputs prefixed by the word
PARTIAL.
Discussion: 12585.1460737650@sss.pgh.pa.us
Patch by me, reviewed by David Rowley.
The previous display was sort of confusing, because it didn't
distinguish between the number of workers that we planned to launch
and the number that actually got launched. This has already confused
several people, so display both numbers and label them clearly.
Julien Rouhaud, reviewed by me.
Previously bcac23d exposed a subset of support functions, namely the
ones Kaigai found useful. In
20160304193704.elq773pyg5fyl3mi@alap3.anarazel.de I mentioned that
there's some functions missing to use the facility in an external
project.
To avoid having to add functions piecemeal, add all the functions which
are used to define READ_* and WRITE_* macros; users of the extensible
node functionality are likely to need these. Additionally expose
outDatum(), which doesn't have it's own WRITE_ macro, as it needs
information from the embedding struct.
Discussion: 20160304193704.elq773pyg5fyl3mi@alap3.anarazel.de
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
The code that estimates what parallel degree should be uesd for the
scan of a relation is currently rather stupid, so add a parallel_degree
reloption that can be used to override the planner's rather limited
judgement.
Julien Rouhaud, reviewed by David Rowley, James Sewell, Amit Kapila,
and me. Some further hacking by me.
This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output. Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.
Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
This is necessary infrastructure for supporting parallel aggregation
for aggregates whose transition type is "internal". Such values
can't be passed between cooperating processes, because they are
just pointers.
David Rowley, reviewed by Tomas Vondra and by me.
Per discussion, the new extensible node framework is thought to be
better designed than the custom path/scan/scanstate stuff we added
in PostgreSQL 9.5. Rework the latter to be more like the former.
This is not backward-compatible, but we generally don't promise that
for C APIs, and there probably aren't many people using this yet
anyway.
KaiGai Kohei, reviewed by Petr Jelinek and me. Some further
cosmetic changes by me.
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
Parallel workers can now partially aggregate the data and pass the
transition values back to the leader, which can combine the partial
results to produce the final answer.
David Rowley, based on earlier work by Haribabu Kommi. Reviewed by
Álvaro Herrera, Tomas Vondra, Amit Kapila, James Sewell, and me.
postgres_fdw can now sent an UPDATE or DELETE statement directly to
the foreign server in simple cases, rather than sending a SELECT FOR
UPDATE statement and then updating or deleting rows one-by-one.
Etsuro Fujita, reviewed by Rushabh Lathia, Shigeru Hanada, Kyotaro
Horiguchi, Albe Laurenz, Thom Brown, and me.
In the initial revision of the upper-planner pathification work, the only
available way for an FDW or custom-scan provider to inject Paths
representing post-scan-join processing was to insert them during scan-level
GetForeignPaths or similar processing. While that's not impossible, it'd
require quite a lot of duplicative processing to look forward and see if
the extension would be capable of implementing the whole query. To improve
matters for custom-scan providers, provide a hook function at the point
where the core code is about to start filling in upperrel Paths. At this
point Paths are available for the whole scan/join tree, which should reduce
the amount of redundant effort considerably.
(An alternative design that was suggested was to provide a separate hook
for each post-scan-join processing step, but that seems messy and not
clearly more useful.)
Following our time-honored tradition, there's no documentation for this
hook outside the source code.
As-is, this hook is only meant for custom scan providers, which we can't
assume very much about. A followon patch will implement an FDW callback
to let FDWs do the same thing in a somewhat more structured fashion.
In commit 19a541143a I did not make PathTarget a subtype of Node,
and embedded a RelOptInfo's reltarget directly into it rather than having
a separately-allocated Node. In hindsight that was misguided
micro-optimization, enabled by the fact that at that point we didn't have
any Paths with custom PathTargets. Now that PathTarget processing has
been fleshed out some more, it's easier to see that it's better to have
PathTarget as an indepedent Node type, even if it does cost us one more
palloc to create a RelOptInfo. So change it while we still can.
This commit just changes the representation, without doing anything more
interesting than that.
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
Instead of having planner.c compute a groupColIdx array and store it in
GroupingSetsPaths, make create_groupingsets_plan() find the grouping
columns by searching in the child plan node's tlist. Although that's
probably a bit slower for create_groupingsets_plan(), it's more like
the way every other plan node type does this, and it provides positive
confirmation that we know which child output columns we're supposed to be
grouping on. (Indeed, looking at this now, I'm not at all sure that it
wasn't broken before, because create_groupingsets_plan() isn't demanding
an exact tlist match from its child node.) Also, this allows substantial
simplification in planner.c, because it no longer needs to compute the
groupColIdx array at all; no other cases were using it.
I'd intended to put off this refactoring until later (like 9.7), but
in view of the likely bug fix and the need to rationalize planner.c's
tlist handling so we can do something sane with Konstantin Knizhnik's
function-evaluation-postponement patch, I think it can't wait.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
An extensible node is always tagged T_Extensible, but the extnodename
field identifies it more specifically; it may also include arbitrary
private data. Extensible nodes can be copied, tested for equality,
serialized, and deserialized, but the core system doesn't know
anything about them otherwise. Some extensions may find it useful to
include these nodes in fdw_private or custom_private lists in lieu of
arm-wrestling their data into a format that the core code can
understand.
Along the way, so as not to burden the authors of such extensible
node types too much, expose the functions for writing serialized
tokens, and for serializing and deserializing bitmapsets.
KaiGai Kohei, per a design suggested by me. Reviewed by Andres Freund
and by me, and further edited by me.
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
This patch doesn't put the new infrastructure to use anywhere, and
indeed it's not clear how it could ever be used for something like
postgres_fdw which has to send an SQL query and wait for a reply,
but there might be FDWs or custom scan providers that are CPU-bound,
so let's give them a way to join club parallel.
KaiGai Kohei, reviewed by me.
You can't really do anything useful with this in the form it currently
exists; among other problems, there's no way to reread whatever
information might be produced when the path is output. Work is
underway to replace this with a more useful and more general system of
extensible nodes, but let's start by getting rid of this bit.
Extracted from a larger patch by KaiGai Kohei.
Previously, the foreign join pushdown infrastructure left the question
of security entirely up to individual FDWs, but it would be easy for
a foreign data wrapper to inadvertently open up subtle security holes
that way. So, make it the core code's job to determine which user
mapping OID is relevant, and don't attempt join pushdown unless it's
the same for all relevant relations.
Per a suggestion from Tom Lane. Shigeru Hanada and Ashutosh Bapat,
reviewed by Etsuro Fujita and KaiGai Kohei, with some further
changes by me.
Putting a reference to an expanded-format value into a Const node would be
a bad idea for a couple of reasons. It'd be possible for the supposedly
immutable Const to change value, if something modified the referenced
variable ... in fact, if the Const's reference were R/W, any function that
has the Const as argument might itself change it at runtime. Also, because
datumIsEqual() is pretty simplistic, the Const might fail to compare equal
to other Consts that it should compare equal to, notably including copies
of itself. This could lead to unexpected planner behavior, such as "could
not find pathkey item to sort" errors or inferior plans.
I have not been able to find any way to get an expanded value into a Const
within the existing core code; but Paul Ramsey was able to trigger the
problem by writing a datatype input function that returns an expanded
value.
The best fix seems to be to establish a rule that varlena values being
placed into Const nodes should be passed through pg_detoast_datum().
That will do nothing (and cost little) in normal cases, but it will flatten
expanded values and thereby avoid the above problems. Also, it will
convert short-header or compressed values into canonical format, which will
avoid possible unexpected lack-of-equality issues for those cases too.
And it provides a last-ditch defense against putting a toasted value into
a Const, which we already knew was dangerous, cf commit 2b0c86b665.
(In the light of this discussion, I'm no longer sure that that commit
provided 100% protection against such cases, but this fix should do it.)
The test added in commit 65c3d05e18 to catch datatype input functions
with unstable results would fail for functions that returned expanded
values; but it seems a bit uncharitable to deem a result unstable just
because it's expressed in expanded form, so revise the coding so that we
check for bitwise equality only after applying pg_detoast_datum(). That's
a sufficient condition anyway given the new rule about detoasting when
forming a Const.
Back-patch to 9.5 where the expanded-object facility was added. It's
possible that this should go back further; but in the absence of clear
evidence that there's any live bug in older branches, I'll refrain for now.
The core innovation of this patch is the introduction of the concept
of a partial path; that is, a path which if executed in parallel will
generate a subset of the output rows in each process. Gathering a
partial path produces an ordinary (complete) path. This allows us to
generate paths for parallel joins by joining a partial path for one
side (which at the baserel level is currently always a Partial Seq
Scan) to an ordinary path on the other side. This is subject to
various restrictions at present, especially that this strategy seems
unlikely to be sensible for merge joins, so only nested loops and
hash joins paths are generated.
This also allows an Append node to be pushed below a Gather node in
the case of a partitioned table.
Testing revealed that early versions of this patch made poor decisions
in some cases, which turned out to be caused by the fact that the
original cost model for Parallel Seq Scan wasn't very good. So this
patch tries to make some modest improvements in that area.
There is much more to be done in the area of generating good parallel
plans in all cases, but this seems like a useful step forward.
Patch by me, reviewed by Dilip Kumar and Amit Kapila.
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
Omitted boundaries represent the upper or lower limit of the corresponding
array subscript. This allows simpler specification of many common
use-cases.
(Revised version of commit 9246af6799)
YUriy Zhuravlev
I originally modeled this data structure on SpecialJoinInfo, but after
commit acfcd45cac that looks like a pretty poor decision.
All we really need is relid sets identifying laterally-referenced rels;
and most of the time, what we want to know about includes indirect lateral
references, a case the LateralJoinInfo data was unsuited to compute with
any efficiency. The previous commit redefined RelOptInfo.lateral_relids
as the transitive closure of lateral references, so that it easily supports
checking indirect references. For the places where we really do want just
direct references, add a new RelOptInfo field direct_lateral_relids, which
is easily set up as a copy of lateral_relids before we perform the
transitive closure calculation. Then we can just drop lateral_info_list
and LateralJoinInfo and the supporting code. This makes the planner's
handling of lateral references noticeably more efficient, and shorter too.
Such a change can't be back-patched into stable branches for fear of
breaking extensions that might be looking at the planner's data structures;
but it seems not too late to push it into 9.5, so I've done so.
More fuzz testing by Andreas Seltenreich exposed that the planner did not
cope well with chains of lateral references. If relation X references Y
laterally, and Y references Z laterally, then we will have to scan X on the
inside of a nestloop with Z, so for all intents and purposes X is laterally
dependent on Z too. The planner did not understand this and would generate
intermediate joins that could not be used. While that was usually harmless
except for wasting some planning cycles, under the right circumstances it
would lead to "failed to build any N-way joins" or "could not devise a
query plan" planner failures.
To fix that, convert the existing per-relation lateral_relids and
lateral_referencers relid sets into their transitive closures; that is,
they now show all relations on which a rel is directly or indirectly
laterally dependent. This not only fixes the chained-reference problem
but allows some of the relevant tests to be made substantially simpler
and faster, since they can be reduced to simple bitmap manipulations
instead of searches of the LateralJoinInfo list.
Also, when a PlaceHolderVar that is due to be evaluated at a join contains
lateral references, we should treat those references as indirect lateral
dependencies of each of the join's base relations. This prevents us from
trying to join any individual base relations to the lateral reference
source before the join is formed, which again cannot work.
Andreas' testing also exposed another oversight in the "dangerous
PlaceHolderVar" test added in commit 85e5e222b1. Simply rejecting
unsafe join paths in joinpath.c is insufficient, because in some cases
we will end up rejecting *all* possible paths for a particular join, again
leading to "could not devise a query plan" failures. The restriction has
to be known also to join_is_legal and its cohort functions, so that they
will not select a join for which that will happen. I chose to move the
supporting logic into joinrels.c where the latter functions are.
Back-patch to 9.3 where LATERAL support was introduced.
The original parallel sequential scan commit included only very limited
changes to the EXPLAIN output. Aggregated totals from all workers were
displayed, but there was no way to see what each individual worker did
or to distinguish the effort made by the workers from the effort made by
the leader.
Per a gripe by Thom Brown (and maybe others). Patch by me, reviewed
by Amit Kapila.
The single linked list of memory contexts could result in O(N^2)
performance to free a set of contexts if they were not freed in
reverse order of creation. In many cases the reverse order was
used, but there were some significant exceptions that caused real-
world performance problems. Rather than requiring all callers to
care about the order in which contexts were freed, and hunting down
and changing all existing cases where the wrong order was used, we
add one pointer per memory context so that the implementation
details are not so visible.
Jan Wieck
Commit e7cb7ee145 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
While convincing myself that commit 7e19db0c09 would solve both of
the problems recently reported by Andreas Seltenreich, I realized that
add_paths_to_joinrel's handling of LATERAL restrictions could be made
noticeably simpler and faster if we were to retain the minimum possible
parameterization for each joinrel (that is, the set of relids supplying
unsatisfied lateral references in it). We already retain that for
baserels, in RelOptInfo.lateral_relids, so we can use that field for
joinrels too.
I re-pgindent'd the files touched here, which affects some unrelated
comments.
This is, I believe, just a minor optimization not a bug fix, so no
back-patch.
Commit a0d9f6e434 added this support for
all other plan node types; this fills in the gap.
Since TextOutCustomScan complicates this and is pretty well useless,
remove it.
KaiGai Kohei, with some modifications by me.
Add a new flag, consider_parallel, to each RelOptInfo, indicating
whether a plan for that relation could conceivably be run inside of
a parallel worker. Right now, we're pretty conservative: for example,
it might be possible to defer applying a parallel-restricted qual
in a worker, and later do it in the leader, but right now we just
don't try to parallelize access to that relation. That's probably
the right decision in most cases, anyway.
Using the new flag, generate parallel sequential scan plans for plain
baserels, meaning that we now have parallel sequential scan in
PostgreSQL. The logic here is pretty unsophisticated right now: the
costing model probably isn't right in detail, and we can't push joins
beneath Gather nodes, so the number of plans that can actually benefit
from this is pretty limited right now. Lots more work is needed.
Nevertheless, it seems time to enable this functionality so that all
this code can actually be tested easily by users and developers.
Note that, if you wish to test this functionality, it will be
necessary to set max_parallel_degree to a value greater than the
default of 0. Once a few more loose ends have been tidied up here, we
might want to consider changing the default value of this GUC, but
I'm leaving it alone for now.
Along the way, fix a bug in cost_gather: the previous coding thought
that a Gather node's transfer overhead should be costed on the basis of
the relation size rather than the number of tuples that actually need
to be passed off to the leader.
Patch by me, reviewed in earlier versions by Amit Kapila.
In addition, this path fills in a number of missing bits and pieces in
the parallel infrastructure. Paths and plans now have a parallel_aware
flag indicating whether whatever parallel-aware logic they have should
be engaged. It is believed that we will need this flag for a number of
path/plan types, not just sequential scans, which is why the flag is
generic rather than part of the SeqScan structures specifically.
Also, execParallel.c now gives parallel nodes a chance to initialize
their PlanState nodes from the DSM during parallel worker startup.
Amit Kapila, with a fair amount of adjustment by me. Review of previous
patch versions by Haribabu Kommi and others.
Commit 4a4e6893aa, which introduced this
mechanism, failed to account for the fact that the RECORD pseudo-type
uses transient typmods that are only meaningful within a single
backend. Transferring such tuples without modification between two
cooperating backends does not work. This commit installs a system
for passing the tuple descriptors over the same shm_mq being used to
send the tuples themselves. The two sides might not assign the same
transient typmod to any given tuple descriptor, so we must also
substitute the appropriate receiver-side typmod for the one used by
the sender. That adds some CPU overhead, but still seems better than
being unable to pass records between cooperating parallel processes.
Along the way, move the logic for handling multiple tuple queues from
tqueue.c to nodeGather.c; tqueue.c now provides a TupleQueueReader,
which reads from a single queue, rather than a TupleQueueFunnel, which
potentially reads from multiple queues. This change was suggested
previously as a way to make sure that nodeGather.c rather than tqueue.c
had policy control over the order in which to read from queues, but
it wasn't clear to me until now how good an idea it was. typmod
mapping needs to be performed separately for each queue, and it is
much simpler if the tqueue.c code handles that and leaves multiplexing
multiple queues to higher layers of the stack.
Commit d1b7c1ffe7 introduced a mechanism
for serializing a ParamListInfo structure to be passed to a parallel
worker. However, this mechanism failed to handle external expanded
values, as pointed out by Noah Misch. Repair.
Moreover, plpgsql_param_fetch requires adjustment because the
serialization mechanism needs it to skip evaluating unused parameters
just as we would do when it is called from copyParamList, but params
== estate->paramLI in that case. To fix, make the bms_is_member test
in that function unconditional.
Finally, have setup_param_list set a new ParamListInfo field,
paramMask, to the parameters actually used in the expression, so that
we don't try to fetch those that are not needed when serializing a
parameter list. This isn't necessary for correctness, but it makes
the performance of the parallel executor code comparable to what we
do for cases involving cursors.
Design suggestions and extensive review by Noah Misch. Patch by me.
The original Gather code failed to mark a Gather node as not able to
do projection, but it couldn't, even though it did call initialize its
projection info via ExecAssignProjectionInfo. There doesn't seem to
be any good reason for this node not to have projection capability,
so clean things up so that it does. Without this, plans using Gather
nodes might need to carry extra Result nodes to do projection.
In the previous coding, before returning from ExecutorRun, we'd shut
down all parallel workers. This was dead wrong if ExecutorRun was
called with a non-zero tuple count; it had the effect of truncating
the query output. To fix, give ExecutePlan control over whether to
enter parallel mode, and have it refuse to do so if the tuple count
is non-zero. Rewrite the Gather logic so that it can cope with being
called outside parallel mode.
Commit 7aea8e4f2d is largely to blame
for this problem, though this patch modifies some subsequently-committed
code which relied on the guarantees it purported to make.
This fixes a long-standing bug which was discovered while investigating
the interaction between the new join pushdown code and the EvalPlanQual
machinery: if a ForeignScan appears on the inner side of a paramaterized
nestloop, an EPQ recheck would re-return the original tuple even if
it no longer satisfied the pushed-down quals due to changed parameter
values.
This fix adds a new member to ForeignScan and ForeignScanState and a
new argument to make_foreignscan, and requires changes to FDWs which
push down quals to populate that new argument with a list of quals they
have chosen to push down. Therefore, I'm only back-patching to 9.5,
even though the bug is not new in 9.5.
Etsuro Fujita, reviewed by me and by Kyotaro Horiguchi.
The WithCheckOptions list in Query are only populated during rewrite and
do not need to be written out or read in as part of a Query structure.
Further, move WithCheckOptions to the bottom and add comments to clarify
that it is only populated during rewrite.
Back-patch to 9.5 with a catversion bump, as we are still in alpha.
To allow users to force RLS to always be applied, even for table owners,
add ALTER TABLE .. FORCE ROW LEVEL SECURITY.
row_security=off overrides FORCE ROW LEVEL SECURITY, to ensure pg_dump
output is complete (by default).
Also add SECURITY_NOFORCE_RLS context to avoid data corruption when
ALTER TABLE .. FORCE ROW SECURITY is being used. The
SECURITY_NOFORCE_RLS security context is used only during referential
integrity checks and is only considered in check_enable_rls() after we
have already checked that the current user is the owner of the relation
(which should always be the case during referential integrity checks).
Back-patch to 9.5 where RLS was added.
A Gather executor node runs any number of copies of a plan in an equal
number of workers and merges all of the results into a single tuple
stream. It can also run the plan itself, if the workers are
unavailable or haven't started up yet. It is intended to work with
the Partial Seq Scan node which will be added in future commits.
It could also be used to implement parallel query of a different sort
by itself, without help from Partial Seq Scan, if the single_copy mode
is used. In that mode, a worker executes the plan, and the parallel
leader does not, merely collecting the worker's results. So, a Gather
node could be inserted into a plan to split the execution of that plan
across two processes. Nested Gather nodes aren't currently supported,
but we might want to add support for that in the future.
There's nothing in the planner to actually generate Gather nodes yet,
so it's not quite time to break out the champagne. But we're getting
close.
Amit Kapila. Some designs suggestions were provided by me, and I also
reviewed the patch. Single-copy mode, documentation, and other minor
changes also by me.
This code provides infrastructure for a parallel leader to start up
parallel workers to execute subtrees of the plan tree being executed
in the master. User-supplied parameters from ParamListInfo are passed
down, but PARAM_EXEC parameters are not. Various other constructs,
such as initplans, subplans, and CTEs, are also not currently shared.
Nevertheless, there's enough here to support a basic implementation of
parallel query, and we can lift some of the current restrictions as
needed.
Amit Kapila and Robert Haas
ExplainPreScanNode knows how to iterate over a generic tree of plan
states; factor that logic out into a separate walker function so that
other code, such as upcoming patches for parallel query, can also use
it.
Patch by me, reviewed by Tom Lane.
Commit 924bcf4f16 introduced a framework
for parallel computation in PostgreSQL that makes most but not all
built-in functions safe to execute in parallel mode. In order to have
parallel query, we'll need to be able to determine whether that query
contains functions (either built-in or user-defined) that cannot be
safely executed in parallel mode. This requires those functions to be
labeled, so this patch introduces an infrastructure for that. Some
functions currently labeled as safe may need to be revised depending on
how pending issues related to heavyweight locking under paralllelism
are resolved.
Parallel plans can't be used except for the case where the query will
run to completion. If portal execution were suspended, the parallel
mode restrictions would need to remain in effect during that time, but
that might make other queries fail. Therefore, this patch introduces
a framework that enables consideration of parallel plans only when it
is known that the plan will be run to completion. This probably needs
some refinement; for example, at bind time, we do not know whether a
query run via the extended protocol will be execution to completion or
run with a limited fetch count. Having the client indicate its
intentions at bind time would constitute a wire protocol break. Some
contexts in which parallel mode would be safe are not adjusted by this
patch; the default is not to try parallel plans except from call sites
that have been updated to say that such plans are OK.
This commit doesn't introduce any parallel paths or plans; it just
provides a way to determine whether they could potentially be used.
I'm committing it on the theory that the remaining parallel sequential
scan patches will also get committed to this release, hopefully in the
not-too-distant future.
Robert Haas and Amit Kapila. Reviewed (in earlier versions) by Noah
Misch.
This refactors rewrite/rowsecurity.c to simplify the handling of the
default deny case (reducing the number of places where we check for and
add the default deny policy from three to one) by splitting up the
retrival of the policies from the application of them.
This also allowed us to do away with the policy_id field. A policy_name
field was added for WithCheckOption policies and is used in error
reporting, when available.
Patch by Dean Rasheed, with various mostly cosmetic changes by me.
Back-patch to 9.5 where RLS was introduced to avoid unnecessary
differences, since we're still in alpha, per discussion with Robert.
Per discussion, nowadays it is possible to have tablespaces that have
wildly different I/O characteristics from others. Setting different
effective_io_concurrency parameters for those has been measured to
improve performance.
Author: Julien Rouhaud
Reviewed by: Andres Freund
Since 6fcd885 it is possible to immediately reserve WAL when creating a
slot via pg_create_physical_replication_slot(). Extend the replication
protocol to allow that as well.
Although, in contrast to the SQL interface, it is possible to update the
reserved location via the replication interface, it is still useful
being able to reserve upon creation there. Otherwise the logic in
ReplicationSlotReserveWal() has to be repeated in slot employing
clients.
Author: Michael Paquier
Discussion: CAB7nPqT0Wc1W5mdYGeJ_wbutbwNN+3qgrFR64avXaQCiJMGaYA@mail.gmail.com
We had a report from Stefan Kaltenbrunner of a case in which postmaster
log files overran available disk space because multiple backends spewed
enormous context stats dumps upon hitting an out-of-memory condition.
Given the lack of similar reports, this isn't a common problem, but it
still seems worth doing something about. However, we don't want to just
blindly truncate the output, because that might prevent diagnosis of OOM
problems. What seems like a workable compromise is to limit the dump to
100 child contexts per parent, and summarize the space used within any
additional child contexts. That should help because practical cases where
the dump gets long will typically be huge numbers of siblings under the
same parent context; while the additional debugging value from seeing
details about individual siblings beyond 100 will not be large, we hope.
Anyway it doesn't take much code or memory space to do this, so let's try
it like this and see how things go.
Since the summarization mechanism requires passing totals back up anyway,
I took the opportunity to add a "grand total" line to the end of the
printout.
To avoid confusion, rename CreatePolicyStmt's 'cmd' to 'cmd_name',
parse_policy_command's 'cmd' to 'polcmd', and AlterPolicy's 'cmd_datum'
to 'polcmd_datum', per discussion with Noah and as a follow-up to his
correction of copynodes/equalnodes handling of the CreatePolicyStmt
'cmd' field.
Back-patch to 9.5 where the CreatePolicyStmt was introduced, as we
are still only in alpha.
Until now we computed these Param ID sets at the end of subquery_planner,
but that approach depends on subquery_planner returning a concrete Plan
tree. We would like to switch over to returning one or more Paths for a
subquery, and in that representation the necessary details aren't fully
fleshed out (not to mention that we don't really want to do this work for
Paths that end up getting discarded). Hence, refactor so that we can
compute the param ID sets at the end of planning, just before
set_plan_references is run.
The main change necessary to make this work is that we need to capture
the set of outer-level Param IDs available to the current query level
before exiting subquery_planner, since the outer levels' plan_params lists
are transient. (That's not going to pose a problem for returning Paths,
since all the work involved in producing that data is part of expression
preprocessing, which will continue to happen before Paths are produced.)
On the plus side, this change gets rid of several existing kluges.
Eventually I'd like to get rid of SS_finalize_plan altogether in favor of
doing this work during set_plan_references, but that will require some
complex rejiggering because SS_finalize_plan needs to visit subplans and
initplans before the main plan. So leave that idea for another day.
So far we have worked around the fact that some very old compilers do
not support 'inline' functions by only using inline functions
conditionally (or not at all). Since such compilers are very rare by
now, we have decided to rely on inline functions from 9.6 onwards.
To avoid breaking these old compilers inline is defined away when not
supported. That'll cause "function x defined but not used" type of
warnings, but since nobody develops on such compilers anymore that's
ok.
This change in policy will allow us to more easily employ inline
functions.
I chose to remove code previously conditional on PG_USE_INLINE as it
seemed confusing to have code dependent on a define that's always
defined.
Blacklisting of compilers, like in c53f73879f, now has to be done
differently. A platform template can define PG_FORCE_DISABLE_INLINE to
force inline to be defined empty.
Discussion: 20150701161447.GB30708@awork2.anarazel.de
If there are two different aggregates in the query with same inputs, and
the aggregates have the same initial condition and transition function,
only calculate the state value once, and only call the final functions
separately. For example, AVG(x) and SUM(x) aggregates have the same
transition function, which accumulates the sum and number of input tuples.
For a query like "SELECT AVG(x), SUM(x) FROM x", we can therefore
accumulate the state function only once, which gives a nice speedup.
David Rowley, reviewed and edited by me.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
In the passing, also move AT_ReAddComment to more logical position in the
enum, after all the Constraint-related subcommands.
This fixes a compiler warning, added by commit e42375fc. Backpatch to 9.5,
like that patch.
Other options cannot be changed, as it's not totally clear if cached plans
would need to be invalidated if one of the other options change. Selectivity
estimator functions only change plan costs, not correctness of plans, so
those should be safe.
Original patch by Uriy Zhuravlev, heavily edited by me.
When a column's datatype is changed, ATExecAlterColumnType() rebuilds all
the affected indexes and constraints, and the comments from the old
indexes/constraints were not carried over.
To fix, create a synthetic COMMENT ON command in the work queue, to re-add
any comments on constraints. For indexes, there's a comment field in
IndexStmt that is used.
This fixes bug #13126, reported by Kirill Simonov. Original patch by
Michael Paquier, reviewed by Petr Jelinek and me. This bug is present in
all versions, but only backpatch to 9.5. Given how minor the issue is, it
doesn't seem worth the work and risk to backpatch further than that.
Allow CustomPath to have a list of paths, CustomPlan a list of plans,
and CustomPlanState a list of planstates known to the core system, so
that custom path/plan providers can more reasonably use this
infrastructure for nodes with multiple children.
KaiGai Kohei, per a design suggestion from Tom Lane, with some
further kibitzing by me.
When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
Previously, INSERT with ON CONFLICT DO UPDATE specified used a new
command tag -- UPSERT. It was introduced out of concern that INSERT as
a command tag would be a misrepresentation for ON CONFLICT DO UPDATE, as
some affected rows may actually have been updated.
Alvaro Herrera noticed that the implementation of that new command tag
was incomplete; in subsequent discussion we concluded that having it
doesn't provide benefits that are in line with the compatibility breaks
it requires.
Catversion bump due to the removal of PlannedStmt->isUpsert.
Author: Peter Geoghegan
Discussion: 20150520215816.GI5885@postgresql.org
Defer lookup of opfamily and input type of a of a user specified opclass
until the optimizer selects among available unique indexes; and store
the opclass in the parse analyzed tree instead. The primary reason for
doing this is that for rule deparsing it's easier to use the opclass
than the previous representation.
While at it also rename a variable in the inference code to better fit
it's purpose.
This is separate from the actual fixes for deparsing to make review
easier.
This oversight results in a crash at executor startup if the plan has
been copied. outfuncs.c was missed as well.
While we could probably have taught both those files to cope with the
originally chosen representation of an Oid array, it would have been
painful, not least because there'd be no easy way to verify the array
length. An Oid List is far easier to work with. And AFAICS, there is
no particular notational benefit to using an array rather than a list
in the existing parts of the patch either. So just change it to a list.
Error in commit 35fcb1b3d0, which is new,
so no need for back-patch.
This SQL standard functionality allows to aggregate data by different
GROUP BY clauses at once. Each grouping set returns rows with columns
grouped by in other sets set to NULL.
This could previously be achieved by doing each grouping as a separate
query, conjoined by UNION ALLs. Besides being considerably more concise,
grouping sets will in many cases be faster, requiring only one scan over
the underlying data.
The current implementation of grouping sets only supports using sorting
for input. Individual sets that share a sort order are computed in one
pass. If there are sets that don't share a sort order, additional sort &
aggregation steps are performed. These additional passes are sourced by
the previous sort step; thus avoiding repeated scans of the source data.
The code is structured in a way that adding support for purely using
hash aggregation or a mix of hashing and sorting is possible. Sorting
was chosen to be supported first, as it is the most generic method of
implementation.
Instead of, as in an earlier versions of the patch, representing the
chain of sort and aggregation steps as full blown planner and executor
nodes, all but the first sort are performed inside the aggregation node
itself. This avoids the need to do some unusual gymnastics to handle
having to return aggregated and non-aggregated tuples from underlying
nodes, as well as having to shut down underlying nodes early to limit
memory usage. The optimizer still builds Sort/Agg node to describe each
phase, but they're not part of the plan tree, but instead additional
data for the aggregation node. They're a convenient and preexisting way
to describe aggregation and sorting. The first (and possibly only) sort
step is still performed as a separate execution step. That retains
similarity with existing group by plans, makes rescans fairly simple,
avoids very deep plans (leading to slow explains) and easily allows to
avoid the sorting step if the underlying data is sorted by other means.
A somewhat ugly side of this patch is having to deal with a grammar
ambiguity between the new CUBE keyword and the cube extension/functions
named cube (and rollup). To avoid breaking existing deployments of the
cube extension it has not been renamed, neither has cube been made a
reserved keyword. Instead precedence hacking is used to make GROUP BY
cube(..) refer to the CUBE grouping sets feature, and not the function
cube(). To actually group by a function cube(), unlikely as that might
be, the function name has to be quoted.
Needs a catversion bump because stored rules may change.
Author: Andrew Gierth and Atri Sharma, with contributions from Andres Freund
Reviewed-By: Andres Freund, Noah Misch, Tom Lane, Svenne Krap, Tomas
Vondra, Erik Rijkers, Marti Raudsepp, Pavel Stehule
Discussion: CAOeZVidmVRe2jU6aMk_5qkxnB7dfmPROzM7Ur8JPW5j8Y5X-Lw@mail.gmail.com
Add a TABLESAMPLE clause to SELECT statements that allows
user to specify random BERNOULLI sampling or block level
SYSTEM sampling. Implementation allows for extensible
sampling functions to be written, using a standard API.
Basic version follows SQLStandard exactly. Usable
concrete use cases for the sampling API follow in later
commits.
Petr Jelinek
Reviewed by Michael Paquier and Simon Riggs
The distance function can now set *recheck = false, like index quals. The
executor will then re-check the ORDER BY expressions, and use a queue to
reorder the results on the fly.
This makes it possible to do kNN-searches on polygons and circles, which
don't store the exact value in the index, but just a bounding box.
Alexander Korotkov and me
When this option is specified, a progress report is printed as each index
is reindexed.
Per discussion, we agreed on the following syntax for the extensibility of
the options.
REINDEX (flexible options) { INDEX | ... } name
Sawada Masahiko.
Reviewed by Robert Haas, Fabrízio Mello, Alvaro Herrera, Kyotaro Horiguchi,
Jim Nasby and me.
Discussion: CAD21AoA0pK3YcOZAFzMae+2fcc3oGp5zoRggDyMNg5zoaWDhdQ@mail.gmail.com
This patch introduces the ability for complex datatypes to have an
in-memory representation that is different from their on-disk format.
On-disk formats are typically optimized for minimal size, and in any case
they can't contain pointers, so they are often not well-suited for
computation. Now a datatype can invent an "expanded" in-memory format
that is better suited for its operations, and then pass that around among
the C functions that operate on the datatype. There are also provisions
(rudimentary as yet) to allow an expanded object to be modified in-place
under suitable conditions, so that operations like assignment to an element
of an array need not involve copying the entire array.
The initial application for this feature is arrays, but it is not hard
to foresee using it for other container types like JSON, XML and hstore.
I have hopes that it will be useful to PostGIS as well.
In this initial implementation, a few heuristics have been hard-wired
into plpgsql to improve performance for arrays that are stored in
plpgsql variables. We would like to generalize those hacks so that
other datatypes can obtain similar improvements, but figuring out some
appropriate APIs is left as a task for future work. (The heuristics
themselves are probably not optimal yet, either, as they sometimes
force expansion of arrays that would be better left alone.)
Preliminary performance testing shows impressive speed gains for plpgsql
functions that do element-by-element access or update of large arrays.
There are other cases that get a little slower, as a result of added array
format conversions; but we can hope to improve anything that's annoyingly
bad. In any case most applications should see a net win.
Tom Lane, reviewed by Andres Freund
Previously, FDWs could only do "early row locking", that is lock a row as
soon as it's fetched, even though local restriction/join conditions might
discard the row later. This patch adds callbacks that allow FDWs to do
late locking in the same way that it's done for regular tables.
To make use of this feature, an FDW must support the "ctid" column as a
unique row identifier. Currently, since ctid has to be of type TID,
the feature is of limited use, though in principle it could be used by
postgres_fdw. We may eventually allow FDWs to specify another data type
for ctid, which would make it possible for more FDWs to use this feature.
This commit does not modify postgres_fdw to use late locking. We've
tested some prototype code for that, but it's not in committable shape,
and besides it's quite unclear whether it actually makes sense to do late
locking against a remote server. The extra round trips required are likely
to outweigh any benefit from improved concurrency.
Etsuro Fujita, reviewed by Ashutosh Bapat, and hacked up a lot by me
This feature lets user code inspect and take action on DDL events.
Whenever a ddl_command_end event trigger is installed, DDL actions
executed are saved to a list which can be inspected during execution of
a function attached to ddl_command_end.
The set-returning function pg_event_trigger_ddl_commands can be used to
list actions so captured; it returns data about the type of command
executed, as well as the affected object. This is sufficient for many
uses of this feature. For the cases where it is not, we also provide a
"command" column of a new pseudo-type pg_ddl_command, which is a
pointer to a C structure that can be accessed by C code. The struct
contains all the info necessary to completely inspect and even
reconstruct the executed command.
There is no actual deparse code here; that's expected to come later.
What we have is enough infrastructure that the deparsing can be done in
an external extension. The intention is that we will add some deparsing
code in a later release, as an in-core extension.
A new test module is included. It's probably insufficient as is, but it
should be sufficient as a starting point for a more complete and
future-proof approach.
Authors: Álvaro Herrera, with some help from Andres Freund, Ian Barwick,
Abhijit Menon-Sen.
Reviews by Andres Freund, Robert Haas, Amit Kapila, Michael Paquier,
Craig Ringer, David Steele.
Additional input from Chris Browne, Dimitri Fontaine, Stephen Frost,
Petr Jelínek, Tom Lane, Jim Nasby, Steven Singer, Pavel Stěhule.
Based on original work by Dimitri Fontaine, though I didn't use his
code.
Discussion:
https://www.postgresql.org/message-id/m2txrsdzxa.fsf@2ndQuadrant.frhttps://www.postgresql.org/message-id/20131108153322.GU5809@eldon.alvh.no-ip.orghttps://www.postgresql.org/message-id/20150215044814.GL3391@alvh.no-ip.org
Commit e7cb7ee145 included some design
decisions that seem pretty questionable to me, and there was quite a lot
of stuff not to like about the documentation and comments. Clean up
as follows:
* Consider foreign joins only between foreign tables on the same server,
rather than between any two foreign tables with the same underlying FDW
handler function. In most if not all cases, the FDW would simply have had
to apply the same-server restriction itself (far more expensively, both for
lack of caching and because it would be repeated for each combination of
input sub-joins), or else risk nasty bugs. Anyone who's really intent on
doing something outside this restriction can always use the
set_join_pathlist_hook.
* Rename fdw_ps_tlist/custom_ps_tlist to fdw_scan_tlist/custom_scan_tlist
to better reflect what they're for, and allow these custom scan tlists
to be used even for base relations.
* Change make_foreignscan() API to include passing the fdw_scan_tlist
value, since the FDW is required to set that. Backwards compatibility
doesn't seem like an adequate reason to expect FDWs to set it in some
ad-hoc extra step, and anyway existing FDWs can just pass NIL.
* Change the API of path-generating subroutines of add_paths_to_joinrel,
and in particular that of GetForeignJoinPaths and set_join_pathlist_hook,
so that various less-used parameters are passed in a struct rather than
as separate parameter-list entries. The objective here is to reduce the
probability that future additions to those parameter lists will result in
source-level API breaks for users of these hooks. It's possible that this
is even a small win for the core code, since most CPU architectures can't
pass more than half a dozen parameters efficiently anyway. I kept root,
joinrel, outerrel, innerrel, and jointype as separate parameters to reduce
code churn in joinpath.c --- in particular, putting jointype into the
struct would have been problematic because of the subroutines' habit of
changing their local copies of that variable.
* Avoid ad-hocery in ExecAssignScanProjectionInfo. It was probably all
right for it to know about IndexOnlyScan, but if the list is to grow
we should refactor the knowledge out to the callers.
* Restore nodeForeignscan.c's previous use of the relcache to avoid
extra GetFdwRoutine lookups for base-relation scans.
* Lots of cleanup of documentation and missed comments. Re-order some
code additions into more logical places.
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
Foreign data wrappers can use this capability for so-called "join
pushdown"; that is, instead of executing two separate foreign scans
and then joining the results locally, they can generate a path which
performs the join on the remote server and then is scanned locally.
This commit does not extend postgres_fdw to take advantage of this
capability; it just provides the infrastructure.
Custom scan providers can use this in a similar way. Previously,
it was only possible for a custom scan provider to scan a single
relation. Now, it can scan an entire join tree, provided of course
that it knows how to produce the same results that the join would
have produced if executed normally.
KaiGai Kohei, reviewed by Shigeru Hanada, Ashutosh Bapat, and me.
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
In 83ff1618 we defined integer limits iff they're not provided by the
system. That turns out not to be the greatest idea because there's
different ways some datatypes can be represented. E.g. on OSX PG's 64bit
datatype will be a 'long int', but OSX unconditionally uses 'long
long'. That disparity then can lead to warnings, e.g. around printf
formats.
One way to fix that would be to back int64 using stdint.h's
int64_t. While a good idea it's not that easy to implement. We would
e.g. need to include stdint.h in our external headers, which we don't
today. Also computing the correct int64 printf formats in that case is
nontrivial.
Instead simply prefix the integer limits with PG_ and define them
unconditionally. I've adjusted all the references to them in code, but
not the ones in comments; the latter seems unnecessary to me.
Discussion: 20150331141423.GK4878@alap3.anarazel.de
This adds a new GiST opclass method, 'fetch', which is used to reconstruct
the original Datum from the value stored in the index. Also, the 'canreturn'
index AM interface function gains a new 'attno' argument. That makes it
possible to use index-only scans on a multi-column index where some of the
opclasses support index-only scans but some do not.
This patch adds support in the box and point opclasses. Other opclasses
can added later as follow-on patches (btree_gist would be particularly
interesting).
Anastasia Lubennikova, with additional fixes and modifications by me.
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
We were involving the parser too much in setting up initial vacuuming
parameters. This patch moves that responsibility elsewhere to simplify
code, and also to make future additions easier. To do this, create a
new struct VacuumParams which is filled just prior to vacuum execution,
instead of at parse time; for user-invoked vacuuming this is set up in a
new function ExecVacuum, while autovacuum sets it up by itself.
While at it, add a new member VACOPT_SKIPTOAST to enum VacuumOption,
only set by autovacuum, which is used to disable vacuuming of the toast
table instead of the old do_toast parameter; this relieves the argument
list of vacuum() and some callees a bit. This partially makes up for
having added more arguments in an effort to avoid having autovacuum from
constructing a VacuumStmt parse node.
Author: Michael Paquier. Some tweaks by Álvaro
Reviewed by: Robert Haas, Stephen Frost, Álvaro Herrera
In the spirit of 890192e99a and 4464303405f: have get_object_address
understand individual pg_amop and pg_amproc objects. There is no way to
refer to such objects directly in the grammar -- rather, they are almost
always considered an integral part of the opfamily that contains them.
(The only case that deals with them individually is ALTER OPERATOR
FAMILY ADD/DROP, which carries the opfamily address separately and thus
does not need it to be part of each added/dropped element's address.)
In event triggers it becomes possible to become involved with individual
amop/amproc elements, and this commit enables pg_get_object_address to
do so as well.
To make the overall coding simpler, this commit also slightly changes
the get_object_address representation for opclasses and opfamilies:
instead of having the AM name in the objargs array, I moved it as the
first element of the objnames array. This enables the new code to use
objargs for the type names used by pg_amop and pg_amproc.
Reviewed by: Stephen Frost
This patch fixes two inadequacies of the PlanRowMark representation.
First, that the original LockingClauseStrength isn't stored (and cannot be
inferred for foreign tables, which always get ROW_MARK_COPY). Since some
PlanRowMarks are created out of whole cloth and don't actually have an
ancestral RowMarkClause, this requires adding a dummy LCS_NONE value to
enum LockingClauseStrength, which is fairly annoying but the alternatives
seem worse. This fix allows getting rid of the use of get_parse_rowmark()
in FDWs (as per the discussion around commits 462bd95705 and
8ec8760fc8), and it simplifies some things elsewhere.
Second, that the representation assumed that all child tables in an
inheritance hierarchy would use the same RowMarkType. That's true today
but will soon not be true. We add an "allMarkTypes" field that identifies
the union of mark types used in all a parent table's children, and use
that where appropriate (currently, only in preprocess_targetlist()).
In passing fix a couple of minor infelicities left over from the SKIP
LOCKED patch, notably that _outPlanRowMark still thought waitPolicy
is a bool.
Catversion bump is required because the numeric values of enum
LockingClauseStrength can appear in on-disk rules.
Extracted from a much larger patch to support foreign table inheritance;
it seemed worth breaking this out, since it's a separable concern.
Shigeru Hanada and Etsuro Fujita, somewhat modified by me
Commit df630b0dd5 moved enum LockWaitPolicy
into its very own header file utils/lockwaitpolicy.h, which does not seem
like a great idea from here. First, it's still a node-related declaration,
and second, a file named like that can never sensibly be used for anything
else. I do not think we want to encourage a one-typedef-per-header-file
approach. The upcoming foreign table inheritance patch was doubling down
on this bad idea by moving enum LockClauseStrength into its *own*
can-never-be-used-for-anything-else file. Instead, let's put them both in
a file named nodes/lockoptions.h. (They do seem to need a separate header
file because we need them in both parsenodes.h and plannodes.h, and we
don't want either of those including the other. Past practice might
suggest adding them to nodes/nodes.h, but they don't seem sufficiently
globally useful to justify that.)
Committed separately since there's no functional change here, just some
header-file refactoring.
We can't handle this in the general case due to limitations of the
planner's data representations; but we can allow it in many useful cases,
by being careful to flatten only when we are pulling a single-row subquery
up into a FROM (or, equivalently, inner JOIN) node that will still have at
least one remaining relation child. Per discussion of an example from
Kyotaro Horiguchi.
If we have a semijoin, say
SELECT * FROM x WHERE x1 IN (SELECT y1 FROM y)
and we're estimating the cost of a parameterized indexscan on x, the number
of repetitions of the indexscan should not be taken as the size of y; it'll
really only be the number of distinct values of y1, because the only valid
plan with y on the outside of a nestloop would require y to be unique-ified
before joining it to x. Most of the time this doesn't make that much
difference, but sometimes it can lead to drastically underestimating the
cost of the indexscan and hence choosing a bad plan, as pointed out by
David Kubečka.
Fixing this is a bit difficult because parameterized indexscans are costed
out quite early in the planning process, before we have the information
that would be needed to call estimate_num_groups() and thereby estimate the
number of distinct values of the join column(s). However we can move the
code that extracts a semijoin RHS's unique-ification columns, so that it's
done in initsplan.c rather than on-the-fly in create_unique_path(). That
shouldn't make any difference speed-wise and it's really a bit cleaner too.
The other bit of information we need is the size of the semijoin RHS,
which is easy if it's a single relation (we make those estimates before
considering indexscan costs) but problematic if it's a join relation.
The solution adopted here is just to use the product of the sizes of the
join component rels. That will generally be an overestimate, but since
estimate_num_groups() only uses this input as a clamp, an overestimate
shouldn't hurt us too badly. In any case we don't allow this new logic
to produce a value larger than we would have chosen before, so that at
worst an overestimate leaves us no wiser than we were before.
In the spirit of 890192e99a, this time add support for the things
living in the pg_default_acl catalog. These are not really "objects",
but they show up as such in event triggers.
There is no "DROP DEFAULT PRIVILEGES" or similar command, so it doesn't
look like the new representation given would be useful anywhere else, so
I didn't try to use it outside objectaddress.c. (That might be a bug in
itself, but that would be material for another commit.)
Reviewed by Stephen Frost.
Since commit 72dd233d3e we were trying to obtain object addressing
information in sql_drop event triggers, but that caused failures when
the drops involved user mappings. This addition enables that to work
again. Naturally, pg_get_object_address can work with these objects
now, too.
I toyed with the idea of removing DropUserMappingStmt as a node and
using DropStmt instead in the DropUserMappingStmt grammar production,
but that didn't go very well: for one thing the messages thrown by the
specific code are specialized (you get "server not found" if you specify
the wrong server, instead of a generic "user mapping for ... not found"
which you'd get it we were to merge this with RemoveObjects --- unless
we added even more special cases). For another thing, it would require
to pass RoleSpec nodes through the objname/objargs representation used
by RemoveObjects, which works in isolation, but gets messy when
pg_get_object_address is involved. So I dropped this part for now.
Reviewed by Stephen Frost.
While the SQL standard is pretty vague on the overall topic of operator
precedence (because it never presents a unified BNF for all expressions),
it does seem reasonable to conclude from the spec for <boolean value
expression> that OR has the lowest precedence, then AND, then NOT, then IS
tests, then the six standard comparison operators, then everything else
(since any non-boolean operator in a WHERE clause would need to be an
argument of one of these).
We were only sort of on board with that: most notably, while "<" ">" and
"=" had properly low precedence, "<=" ">=" and "<>" were treated as generic
operators and so had significantly higher precedence. And "IS" tests were
even higher precedence than those, which is very clearly wrong per spec.
Another problem was that "foo NOT SOMETHING bar" constructs, such as
"x NOT LIKE y", were treated inconsistently because of a bison
implementation artifact: they had the documented precedence with respect
to operators to their right, but behaved like NOT (i.e., very low priority)
with respect to operators to their left.
Fixing the precedence issues is just a small matter of rearranging the
precedence declarations in gram.y, except for the NOT problem, which
requires adding an additional lookahead case in base_yylex() so that we
can attach a different token precedence to NOT LIKE and allied two-word
operators.
The bulk of this patch is not the bug fix per se, but adding logic to
parse_expr.c to allow giving warnings if an expression has changed meaning
because of these precedence changes. These warnings are off by default
and are enabled by the new GUC operator_precedence_warning. It's believed
that very few applications will be affected by these changes, but it was
agreed that a warning mechanism is essential to help debug any that are.
Commands such as ALTER USER, ALTER GROUP, ALTER ROLE, GRANT, and the
various ALTER OBJECT / OWNER TO, as well as ad-hoc clauses related to
roles such as the AUTHORIZATION clause of CREATE SCHEMA, the FOR clause
of CREATE USER MAPPING, and the FOR ROLE clause of ALTER DEFAULT
PRIVILEGES can now take the keywords CURRENT_USER and SESSION_USER as
user specifiers in place of an explicit user name.
This commit also fixes some quite ugly handling of special standards-
mandated syntax in CREATE USER MAPPING, which in particular would fail
to work in presence of a role named "current_user".
The special role specifiers PUBLIC and NONE also have more consistent
handling now.
Also take the opportunity to add location tracking to user specifiers.
Authors: Kyotaro Horiguchi. Heavily reworked by Álvaro Herrera.
Reviewed by: Rushabh Lathia, Adam Brightwell, Marti Raudsepp.
Previously, we cached domain constraints for the life of a query, or
really for the life of the FmgrInfo struct that was used to invoke
domain_in() or domain_check(). But plpgsql (and probably other places)
are set up to cache such FmgrInfos for the whole lifespan of a session,
which meant they could be enforcing really stale sets of constraints.
On the other hand, searching pg_constraint once per query gets kind of
expensive too: testing says that as much as half the runtime of a
trivial query such as "SELECT 0::domaintype" went into that.
To fix this, delegate the responsibility for tracking a domain's
constraints to the typcache, which has the infrastructure needed to
detect syscache invalidation events that signal possible changes.
This not only removes unnecessary repeat reads of pg_constraint,
but ensures that we never apply stale constraint data: whatever we
use is the current data according to syscache rules.
Unfortunately, the current configuration of the system catalogs means
we have to flush cached domain-constraint data whenever either pg_type
or pg_constraint changes, which happens rather a lot (eg, creation or
deletion of a temp table will do it). It might be worth rearranging
things to split pg_constraint into two catalogs, of which the domain
constraint one would probably be very low-traffic. That's a job for
another patch though, and in any case this patch should improve matters
materially even with that handicap.
This patch makes use of the recently-added memory context reset callback
feature to manage the lifespan of domain constraint caches, so that we
don't risk deleting a cache that might be in the midst of evaluation.
Although this is a bug fix as well as a performance improvement, no
back-patch. There haven't been many if any field complaints about
stale domain constraint checks, so it doesn't seem worth taking the
risk of modifying data structures as basic as MemoryContexts in back
branches.
Initial experience with this feature suggests that instances of
MemoryContextCallback are likely to propagate into some widely-used headers
over time. As things stood, that would result in pulling memutils.h or
at least memnodes.h into common headers, which does not seem desirable.
Instead, let's decide that this feature is part of the "ordinary palloc
user" API rather than the "specialized context management" API, and as
such should be declared in palloc.h not memutils.h.
This allows cleanup actions to be registered to be called just before a
particular memory context's contents are flushed (either by deletion or
MemoryContextReset). The patch in itself has no use-cases for this, but
several likely reasons for wanting this exist.
In passing, per discussion, rearrange some boolean fields in struct
MemoryContextData so as to avoid wasted padding space. For safety,
this requires making allowInCritSection's existence unconditional;
but I think that's a better approach than what was there anyway.
Use a different A_Expr_Kind for LIKE/ILIKE/SIMILAR TO constructs, so that
they can be distinguished from direct invocation of the underlying
operators. Also, postpone selection of the operator name when transforming
"x IN (select)" to "x = ANY (select)", so that those syntaxes can be told
apart at parse analysis time.
I had originally thought I'd also have to do something special for the
syntaxes IS NOT DISTINCT FROM, IS NOT DOCUMENT, and x NOT IN (SELECT...),
which the grammar translates as though they were NOT (construct).
On reflection though, we can distinguish those cases reliably by noting
whether the parse location shown for the NOT is the same as for its child
node. This only requires tweaking the parse locations for NOT IN, which
I've done here.
These changes should have no effect outside the parser; they're just in
support of being able to give accurate warnings for planned operator
precedence changes.
We did not need a location tag on NullTest or BooleanTest before, because
no error messages referred directly to their locations. That's planned
to change though, so add these fields in a separate housekeeping commit.
Catversion bump because stored rules may change.
transformExpr() has for many years had provisions to do nothing when
applied to an already-transformed expression tree. However, this was
always ugly and of dubious reliability, so we'd be much better off without
it. The primary historical reason for it was that gram.y sometimes
returned multiple links to the same subexpression, which is no longer true
as of my BETWEEN fixes. We'd also grown some lazy hacks in CREATE TABLE
LIKE (failing to distinguish between raw and already-transformed index
specifications) and one or two other places.
This patch removes the need for and support for re-transforming already
transformed expressions. The index case is dealt with by adding a flag
to struct IndexStmt to indicate that it's already been transformed;
which has some benefit anyway in that tablecmds.c can now Assert that
transformation has happened rather than just assuming. The other main
reason was some rather sloppy code for array type coercion, which can
be fixed (and its performance improved too) by refactoring.
I did leave transformJoinUsingClause() still constructing expressions
containing untransformed operator nodes being applied to Vars, so that
transformExpr() still has to allow Var inputs. But that's a much narrower,
and safer, special case than before, since Vars will never appear in a raw
parse tree, and they don't have any substructure to worry about.
In passing fix some oversights in the patch that added CREATE INDEX
IF NOT EXISTS (missing processing of IndexStmt.if_not_exists). These
appear relatively harmless, but still sloppy coding practice.
Previously, gram.y itself converted BETWEEN into AND (or AND/OR) nests of
expression comparisons. This was always as bogus as could be, but fixing
it hasn't risen to the top of the to-do list. The present patch invents an
A_Expr representation for BETWEEN expressions, and does the expansion to
comparison trees in parse_expr.c which is at least a slightly saner place
to be doing semantic conversions. There should be no change in the post-
parse-analysis results.
This does nothing for the semantic issues with BETWEEN (dubious connection
to btree-opclass semantics, and multiple evaluation of possibly volatile
subexpressions) ... but it's a necessary preliminary step before we could
fix any of that. The main immediate benefit is that preserving BETWEEN as
an identifiable raw-parse-tree construct will enable better error messages.
While at it, fix the code so that multiply-referenced subexpressions are
physically duplicated before being passed through transformExpr(). This
gets rid of one of the principal reasons why transformExpr() has
historically had to allow already-processed input.
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
The previous coding in EXPLAIN always labeled a ModifyTable node with the
name of the target table affected by its first child plan. When originally
written, this was necessarily the parent table of the inheritance tree,
so everything was unconfusing. But when we added NO INHERIT constraints,
it became possible for the parent table to be deleted from the plan by
constraint exclusion while still leaving child tables present. This led to
the ModifyTable plan node being labeled with the first surviving child,
which was deemed confusing. Fix it by retaining the parent table's RT
index in a new field in ModifyTable.
Etsuro Fujita, reviewed by Ashutosh Bapat and myself
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
This allows access to get_object_address from SQL, which is useful to
obtain OID addressing information from data equivalent to that emitted
by the parser. This is necessary infrastructure of a project to let
replication systems propagate object dropping events to remote servers,
where the schema might be different than the server originating the
DROP.
This patch also adds support for OBJECT_DEFAULT to get_object_address;
that is, it is now possible to refer to a column's default value.
Catalog version bumped due to the new function.
Reviewed by Stephen Frost, Heikki Linnakangas, Robert Haas, Andres
Freund, Abhijit Menon-Sen, Adam Brightwell.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
Apart from enabling comments on domain constraints, this enables a
future project to replicate object dropping to remote servers: with the
current mechanism there's no way to distinguish between the two types of
constraints, so there's no way to know what to drop.
Also added support for the domain constraint comments in psql's \dd and
pg_dump.
Catalog version bumped due to the change in ObjectType enum.
This patch adds a function that replaces a bms_membership() test followed
by a bms_singleton_member() call, performing both the test and the
extraction of a singleton set's member in one scan of the bitmapset.
The performance advantage over the old way is probably minimal in current
usage, but it seems worthwhile on notational grounds anyway.
David Rowley
This patch adds a way of iterating through the members of a bitmapset
nondestructively, unlike the old way with bms_first_member(). While
bms_next_member() is very slightly slower than bms_first_member()
(at least for typical-size bitmapsets), eliminating the need to palloc
and pfree a temporary copy of the target bitmapset is a significant win.
So this method should be preferred in all cases where a temporary copy
would be necessary.
Tom Lane, with suggestions from Dean Rasheed and David Rowley
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
Make it work more like FDW plans do: instead of assuming that there are
expressions in a CustomScan plan node that the core code doesn't know
about, insist that all subexpressions that need planner attention be in
a "custom_exprs" list in the Plan representation. (Of course, the
custom plugin can break the list apart again at executor initialization.)
This lets us revert the parts of the patch that exposed setrefs.c and
subselect.c processing to the outside world.
Also revert the GetSpecialCustomVar stuff in ruleutils.c; that concept
may work in future, but it's far from fully baked right now.
Instead of register_custom_path_provider and a CreateCustomScanPath
callback, let's just provide a standard function hook in set_rel_pathlist.
This is more flexible than what was previously committed, is more like the
usual conventions for planner hooks, and requires less support code in the
core. We had discussed this design (including centralizing the
set_cheapest() calls) back in March or so, so I'm not sure why it wasn't
done like this already.
There seems no prospect that any of this will ever be useful, and indeed
it's questionable whether some of it would work if it ever got called;
it's certainly not been exercised in a very long time, if ever. So let's
get rid of it, and make the comments about mark/restore in execAmi.c less
wishy-washy.
The mark/restore support for Result nodes is also currently dead code,
but that's due to planner limitations not because it's impossible that
it could be useful. So I left it in.
Get rid of the pernicious entanglement between planner and executor headers
introduced by commit 0b03e5951b.
Also, rearrange the CustomFoo struct/typedef definitions so that all the
typedef names are seen as used by the compiler. Without this pgindent
will mess things up a bit, which is not so important perhaps, but it also
removes a bizarre discrepancy between the declaration arrangement used for
CustomExecMethods and that used for CustomScanMethods and
CustomPathMethods.
Clean up the commentary around ExecSupportsMarkRestore to reflect the
rather large change in its API.
Const-ify register_custom_path_provider's argument. This necessitates
casting away const in the function, but that seems better than forcing
callers of the function to do so (or else not const-ify their method
pointer structs, which was sort of the whole point).
De-export fix_expr_common. I don't like the exporting of fix_scan_expr
or replace_nestloop_params either, but this one surely has got little
excuse.
At one time it wasn't terribly important what column names were associated
with the fields of a composite Datum, but since the introduction of
operations like row_to_json(), it's important that looking up the rowtype
ID embedded in the Datum returns the column names that users would expect.
That did not work terribly well before this patch: you could get the column
names of the underlying table, or column aliases from any level of the
query, depending on minor details of the plan tree. You could even get
totally empty field names, which is disastrous for cases like row_to_json().
To fix this for whole-row Vars, look to the RTE referenced by the Var, and
make sure its column aliases are applied to the rowtype associated with
the result Datums. This is a tad scary because we might have to return
a transient RECORD type even though the Var is declared as having some
named rowtype. In principle it should be all right because the record
type will still be physically compatible with the named rowtype; but
I had to weaken one Assert in ExecEvalConvertRowtype, and there might be
third-party code containing similar assumptions.
Similarly, RowExprs have to be willing to override the column names coming
from a named composite result type and produce a RECORD when the column
aliases visible at the site of the RowExpr differ from the underlying
table's column names.
In passing, revert the decision made in commit 398f70ec07 to add
an alias-list argument to ExecTypeFromExprList: better to provide that
functionality in a separate function. This also reverts most of the code
changes in d685814835, which we don't need because we're no longer
depending on the tupdesc found in the child plan node's result slot to be
blessed.
Back-patch to 9.4, but not earlier, since this solution changes the results
in some cases that users might not have realized were buggy. We'll apply a
more restricted form of this patch in older branches.
This allows extension modules to define their own methods for
scanning a relation, and get the core code to use them. It's
unclear as yet how much use this capability will find, but we
won't find out if we never commit it.
KaiGai Kohei, reviewed at various times and in various levels
of detail by Shigeru Hanada, Tom Lane, Andres Freund, Álvaro
Herrera, and myself.
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
As 'ALTER TABLESPACE .. MOVE ALL' really didn't change the tablespace
but instead changed objects inside tablespaces, it made sense to
rework the syntax and supporting functions to operate under the
'ALTER (TABLE|INDEX|MATERIALIZED VIEW)' syntax and to be in
tablecmds.c.
Pointed out by Alvaro, who also suggested the new syntax.
Back-patch to 9.4.
This command provides an automated way to create foreign table definitions
that match remote tables, thereby reducing tedium and chances for error.
In this patch, we provide the necessary core-server infrastructure and
implement the feature fully in the postgres_fdw foreign-data wrapper.
Other wrappers will throw a "feature not supported" error until/unless
they are updated.
Ronan Dunklau and Michael Paquier, additional work by me
The assertion failed if WAL_DEBUG or LWLOCK_STATS was enabled; fix that by
using separate memory contexts for the allocations made within those code
blocks.
This patch introduces a mechanism for marking any memory context as allowed
in a critical section. Previously ErrorContext was exempt as a special case.
Instead of a blanket exception of the checkpointer process, only exempt the
memory context used for the pending ops hash table.
ExecMakeTableFunctionResult evaluated the arguments for a function-in-FROM
in the query-lifespan memory context. This is insignificant in simple
cases where the function relation is scanned only once; but if the function
is in a sub-SELECT or is on the inside of a nested loop, any memory
consumed during argument evaluation can add up quickly. (The potential for
trouble here had been foreseen long ago, per existing comments; but we'd
not previously seen a complaint from the field about it.) To fix, create
an additional temporary context just for this purpose.
Per an example from MauMau. Back-patch to all active branches.
This SQL-standard feature allows a sub-SELECT yielding multiple columns
(but only one row) to be used to compute the new values of several columns
to be updated. While the same results can be had with an independent
sub-SELECT per column, such a workaround can require a great deal of
duplicated computation.
The standard actually says that the source for a multi-column assignment
could be any row-valued expression. The implementation used here is
tightly tied to our existing sub-SELECT support and can't handle other
cases; the Bison grammar would have some issues with them too. However,
I don't feel too bad about this since other cases can be converted into
sub-SELECTs. For instance, "SET (a,b,c) = row_valued_function(x)" could
be written "SET (a,b,c) = (SELECT * FROM row_valued_function(x))".
Since most of the system thinks AND and OR are N-argument expressions
anyway, let's have the grammar generate a representation of that form when
dealing with input like "x AND y AND z AND ...", rather than generating
a deeply-nested binary tree that just has to be flattened later by the
planner. This avoids stack overflow in parse analysis when dealing with
queries having more than a few thousand such clauses; and in any case it
removes some rather unsightly inconsistencies, since some parts of parse
analysis were generating N-argument ANDs/ORs already.
It's still possible to get a stack overflow with weirdly parenthesized
input, such as "x AND (y AND (z AND ( ... )))", but such cases are not
mainstream usage. The maximum depth of parenthesization is already
limited by Bison's stack in such cases, anyway, so that the limit is
probably fairly platform-independent.
Patch originally by Gurjeet Singh, heavily revised by me
Views which are marked as security_barrier must have their quals
applied before any user-defined quals are called, to prevent
user-defined functions from being able to see rows which the
security barrier view is intended to prevent them from seeing.
Remove the restriction on security barrier views being automatically
updatable by adding a new securityQuals list to the RTE structure
which keeps track of the quals from security barrier views at each
level, independently of the user-supplied quals. When RTEs are
later discovered which have securityQuals populated, they are turned
into subquery RTEs which are marked as security_barrier to prevent
any user-supplied quals being pushed down (modulo LEAKPROOF quals).
Dean Rasheed, reviewed by Craig Ringer, Simon Riggs, KaiGai Kohei
Until now, when executing an aggregate function as a window function
within a window with moving frame start (that is, any frame start mode
except UNBOUNDED PRECEDING), we had to recalculate the aggregate from
scratch each time the frame head moved. This patch allows an aggregate
definition to include an alternate "moving aggregate" implementation
that includes an inverse transition function for removing rows from
the aggregate's running state. As long as this can be done successfully,
runtime is proportional to the total number of input rows, rather than
to the number of input rows times the average frame length.
This commit includes the core infrastructure, documentation, and regression
tests using user-defined aggregates. Follow-on commits will update some
of the built-in aggregates to use this feature.
David Rowley and Florian Pflug, reviewed by Dean Rasheed; additional
hacking by me
For variadic functions (other than VARIADIC ANY), the syntaxes foo(x,y,...)
and foo(VARIADIC ARRAY[x,y,...]) should be considered equivalent, since the
former is converted to the latter at parse time. They have indeed been
equivalent, in all releases before 9.3. However, commit 75b39e790 made an
ill-considered decision to record which syntax had been used in FuncExpr
nodes, and then to make equal() test that in checking node equality ---
which caused the syntaxes to not be seen as equivalent by the planner.
This is the underlying cause of bug #9817 from Dmitry Ryabov.
It might seem that a quick fix would be to make equal() disregard
FuncExpr.funcvariadic, but the same commit made that untenable, because
the field actually *is* semantically significant for some VARIADIC ANY
functions. This patch instead adopts the approach of redefining
funcvariadic (and aggvariadic, in HEAD) as meaning that the last argument
is a variadic array, whether it got that way by parser intervention or was
supplied explicitly by the user. Therefore the value will always be true
for non-ANY variadic functions, restoring the principle of equivalence.
(However, the planner will continue to consider use of VARIADIC as a
meaningful difference for VARIADIC ANY functions, even though some such
functions might disregard it.)
In HEAD, this change lets us simplify the decompilation logic in
ruleutils.c, since the funcvariadic/aggvariadic flag tells directly whether
to print VARIADIC. However, in 9.3 we have to continue to cope with
existing stored rules/views that might contain the previous definition.
Fortunately, this just means no change in ruleutils.c, since its existing
behavior effectively ignores funcvariadic for all cases other than VARIADIC
ANY functions.
In HEAD, bump catversion to reflect the fact that FuncExpr.funcvariadic
changed meanings; this is sort of pro forma, since I don't believe any
built-in views are affected.
Unfortunately, this patch doesn't magically fix everything for affected
9.3 users. After installing 9.3.5, they might need to recreate their
rules/views/indexes containing variadic function calls in order to get
everything consistent with the new definition. As in the cited bug,
the symptom of a problem would be failure to use a nominally matching
index that has a variadic function call in its definition. We'll need
to mention this in the 9.3.5 release notes.
This was already documented a few lines further down, but the comment
just beside the field declaration could be misleading. Per gripe
from Kyotaro Horiguchi.
If the name lookups come to different conclusions due to concurrent
activity, we might perform some parts of the DDL on a different table
than other parts. At least in the case of CREATE INDEX, this can be
used to cause the permissions checks to be performed against a
different table than the index creation, allowing for a privilege
escalation attack.
This changes the calling convention for DefineIndex, CreateTrigger,
transformIndexStmt, transformAlterTableStmt, CheckIndexCompatible
(in 9.2 and newer), and AlterTable (in 9.1 and older). In addition,
CheckRelationOwnership is removed in 9.2 and newer and the calling
convention is changed in older branches. A field has also been added
to the Constraint node (FkConstraint in 8.4). Third-party code calling
these functions or using the Constraint node will require updating.
Report by Andres Freund. Patch by Robert Haas and Andres Freund,
reviewed by Tom Lane.
Security: CVE-2014-0062
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
Add the ability to specify the objects to move by who those objects are
owned by (as relowner) and change ALL to mean ALL objects. This
makes the command always operate against a well-defined set of objects
and not have the objects-to-be-moved based on the role of the user
running the command.
Per discussion with Simon and Tom.
Tablespaces have a few options which can be set on them to give PG hints
as to how the tablespace behaves (perhaps it's faster for sequential
scans, or better able to handle random access, etc). These options were
only available through the ALTER TABLESPACE command.
This adds the ability to set these options at CREATE TABLESPACE time,
removing the need to do both a CREATE TABLESPACE and ALTER TABLESPACE to
get the correct options set on the tablespace.
Vik Fearing, reviewed by Michael Paquier.
This adds a 'MOVE' sub-command to ALTER TABLESPACE which allows moving sets of
objects from one tablespace to another. This can be extremely handy and avoids
a lot of error-prone scripting. ALTER TABLESPACE ... MOVE will only move
objects the user owns, will notify the user if no objects were found, and can
be used to move ALL objects or specific types of objects (TABLES, INDEXES, or
MATERIALIZED VIEWS).
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
Tom Lane
Alvaro Herrera
Peter Eisentraut
Robert Haas
Kevin Grittner
Andrew Gierth
Andres Freund
Andrew Dunstan
Bruce Momjian
Stephen Frost
Teodor Sigaev
Simon Riggs
Heikki Linnakangas
Fujii Masao
Tatsuo Ishii