propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
syntactic conflicts, both privilege and role GRANT/REVOKE commands have
to use the same production for scanning the list of tokens that might
eventually turn out to be privileges or role names. So, change the
existing GRANT/REVOKE code to expect a list of strings not pre-reduced
AclMode values. Fix a couple other minor issues while at it, such as
InitializeAcl function name conflicting with a Windows system function.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
in the database. The old behavior (reindex system catalogs only) is now
available as REINDEX SYSTEM. I did not add the complementary REINDEX USER
case since there did not seem to be consensus for this, but it would be
trivial to add later. Per recent discussions.
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
work if either of the join relations are empty. The logic is:
(1) if the inner relation's startup cost is less than the outer
relation's startup cost and this is not an outer join, read
a single tuple from the inner relation via ExecHash()
- if NULL, we're done
(2) read a single tuple from the outer relation
- if NULL, we're done
(3) build the hash table on the inner relation
- if hash table is empty and this is not an outer join,
we're done
(4) otherwise, do hash join as usual
The implementation uses the new MultiExecProcNode API, per a
suggestion from Tom: invoking ExecHash() now produces the first
tuple from the Hash node's child node, whereas MultiExecHash()
builds the hash table.
I had to put in a bit of a kludge to get the row count returned
for EXPLAIN ANALYZE to be correct: since ExecHash() is invoked to
return a tuple, and then MultiExecHash() is invoked, we would
return one too many tuples to EXPLAIN ANALYZE. I hacked around
this by just manually detecting this situation and subtracting 1
from the EXPLAIN ANALYZE row count.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
to a subquery if the outer query is simple enough that the LIMIT can
be reflected directly to the subquery. This didn't use to be very
interesting, because a subquery that couldn't have been flattened into
the upper query was usually not going to be very responsive to
tuple_fraction anyway. But with new code that allows UNION ALL subqueries
to pay attention to tuple_fraction, this is useful to do. In particular
this lets the optimization occur when the UNION ALL is directly inside
a view.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
other_rel_list with a single array indexed by rangetable index.
This reduces find_base_rel from O(N) to O(1) without any real penalty.
While find_base_rel isn't one of the major bottlenecks in any profile
I've seen so far, it was starting to creep up on the radar screen
for complex queries --- so might as well fix it.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
representation as the jointree) with two lists of RTEs, one showing
the RTEs accessible by qualified names, and the other showing the RTEs
accessible by unqualified names. I think this is conceptually simpler
than what we did before, and it's sure a whole lot easier to search.
This seems to eliminate the parse-time bottleneck for deeply nested
JOIN structures that was exhibited by phil@vodafone.
performance problem pointed out by phil@vodafone: to wit, we were
spending O(N^2) time to check dropped-ness in an N-deep join tree,
even in the case where the tree was freshly constructed and couldn't
possibly mention any dropped columns. Instead of recursing in
get_rte_attribute_is_dropped(), change the data structure definition:
the joinaliasvars list of a JOIN RTE must have a NULL Const instead
of a Var at any position that references a now-dropped column. This
costs nothing during normal parse-rewrite-plan path, and instead we
have a linear-time update to make when loading a stored rule that
might contain now-dropped columns. While at it, move the responsibility
for acquring locks on relations referenced by rules into this separate
function (which I therefore chose to call AcquireRewriteLocks).
This saves effort --- namely, duplicated lock grabs in parser and rewriter
--- in the normal path at a cost of one extra non-locked heap_open()
in the stored-rule path; seems a good tradeoff. A fringe benefit is
that it is now *much* clearer that we acquire lock on relations referenced
in rules before we make any rewriter decisions based on their properties.
(I don't know of any bug of that ilk, but it wasn't exactly clear before.)
When one side of the join has a NULL, we don't want to uselessly try
to match it against every remaining tuple of the other side. While
at it, rewrite the comparison machinery to avoid multiple evaluations
of the left and right input expressions and to use a btree comparator
where available, instead of double operator calls. Also revise the
state machine to eliminate redundant comparisons and hopefully make it
more readable too.
startup to end, rather than re-opening it in each MultiExecBitmapIndexScan
call. I had foolishly thought that opening/closing wouldn't be much
more expensive than a rescan call, but that was sheer brain fade.
This seems to fix about half of the performance lossage reported by
Sergey Koposov. I'm still not sure where the other half went.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
node, as this behavior is now better done as a bitmap OR indexscan.
This allows considerable simplification in nodeIndexscan.c itself as
well as several planner modules concerned with indexscan plan generation.
Also we can improve the sharing of code between regular and bitmap
indexscans, since they are now working with nigh-identical Plan nodes.
but just to open and close it during MultiExecBitmapIndexScan. This
avoids acquiring duplicate resources (eg, multiple locks on the same
relation) in a tree with many bitmap scans. Also, don't bother to
lock the parent heap at all here, since we must be underneath a
BitmapHeapScan node that will be holding a suitable lock.
but the code is basically working. Along the way, rewrite the entire
approach to processing OR index conditions, and make it work in join
cases for the first time ever. orindxpath.c is now basically obsolete,
but I left it in for the time being to allow easy comparison testing
against the old implementation.
logic operations during planning. Seems cleaner to create two new Path
node types, instead --- this avoids duplication of cost-estimation code.
Also, create an enable_bitmapscan GUC parameter to control use of bitmap
plans.
scans, using in-memory tuple ID bitmaps as the intermediary. The planner
frontend (path creation and cost estimation) is not there yet, so none
of this code can be executed. I have tested it using some hacked planner
code that is far too ugly to see the light of day, however. Committing
now so that the bulk of the infrastructure changes go in before the tree
drifts under me.
in UPDATE. We also now issue a NOTICE if a query has _any_ implicit
range table entries -- in the past, we would only warn about implicit
RTEs in SELECTs with at least one explicit RTE.
As a result of the warning change, 25 of the regression tests had to
be updated. I also took the opportunity to remove some bogus whitespace
differences between some of the float4 and float8 variants. I believe
I have correctly updated all the platform-specific variants, but let
me know if that's not the case.
Original patch for DELETE ... USING from Euler Taveira de Oliveira,
reworked by Neil Conway.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
implement any new feature, it just pushes the 'not implemented' error
message deeper into the backend. I also tweaked the grammar to accept
Oracle-ish parameter syntax (parameter name first), as well as the
SQL99 standard syntax (parameter mode first), since it was easy and
people will doubtless try to use both anyway.
structs. There are many places in the planner where we were passing
both a rel and an index to subroutines, and now need only pass the
index struct. Notationally simpler, and perhaps a tad faster.
executing a statement that fires triggers. Formerly this time was
included in "Total runtime" but not otherwise accounted for.
As a side benefit, we avoid re-opening relations when firing non-deferred
AFTER triggers, because the trigger code can re-use the main executor's
ResultRelInfo data structure.
of tuples when passing data up through multiple plan nodes. A slot can now
hold either a normal "physical" HeapTuple, or a "virtual" tuple consisting
of Datum/isnull arrays. Upper plan levels can usually just copy the Datum
arrays, avoiding heap_formtuple() and possible subsequent nocachegetattr()
calls to extract the data again. This work extends Atsushi Ogawa's earlier
patch, which provided the key idea of adding Datum arrays to TupleTableSlots.
(I believe however that something like this was foreseen way back in Berkeley
days --- see the old comment on ExecProject.) A test case involving many
levels of join of fairly wide tables (about 80 columns altogether) showed
about 3x overall speedup, though simple queries will probably not be
helped very much.
I have also duplicated some code in heaptuple.c in order to provide versions
of heap_formtuple and friends that use "bool" arrays to indicate null
attributes, instead of the old convention of "char" arrays containing either
'n' or ' '. This provides a better match to the convention used by
ExecEvalExpr. While I have not made a concerted effort to get rid of uses
of the old routines, I think they should be deprecated and eventually removed.
whether or not it is a security definer. Changing a function's strictness
is required by SQL2003, and the other capabilities make sense. Also, allow
an optional RESTRICT noise word to be specified, for SQL conformance.
Some trivial regression tests added and the documentation has been
updated.
Formerly, if such a clause contained no aggregate functions we mistakenly
treated it as equivalent to WHERE. Per spec it must cause the query to
be treated as a grouped query of a single group, the same as appearance
of aggregate functions would do. Also, the HAVING filter must execute
after aggregate function computation even if it itself contains no
aggregate functions.
on-the-fly, and thereby avoid blowing out memory when the planner has
underestimated the hash table size. Hash join will now obey the
work_mem limit with some faithfulness. Per my recent proposal
(hash aggregate part isn't done yet though).
command. This is useful because we can allow truncation of tables
referenced by foreign keys, so long as the referencing table is
truncated in the same command.
Alvaro Herrera
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
a relation's number of blocks, rather than the possibly-obsolete value
in pg_class.relpages. Scale the value in pg_class.reltuples correspondingly
to arrive at a hopefully more accurate number of rows. When pg_class
contains 0/0, estimate a tuple width from the column datatypes and divide
that into current file size to estimate number of rows. This improved
methodology allows us to jettison the ancient hacks that put bogus default
values into pg_class when a table is first created. Also, per a suggestion
from Simon, make VACUUM (but not VACUUM FULL or ANALYZE) adjust the value
it puts into pg_class.reltuples to try to represent the mean tuple density
instead of the minimal density that actually prevails just after VACUUM.
These changes alter the plans selected for certain regression tests, so
update the expected files accordingly. (I removed join_1.out because
it's not clear if it still applies; we can add back any variant versions
as they are shown to be needed.)
clause implicitly whenever one is not given explicitly. Remove concept
of a schema having an associated tablespace, and simplify the rules for
selecting a default tablespace for a table or index. It's now just
(a) explicit TABLESPACE clause; (b) default_tablespace if that's not an
empty string; (c) database's default. This will allow pg_dump to use
SET commands instead of tablespace clauses to determine object locations
(but I didn't actually make it do so). All per recent discussions.
columns. The returned tuple needs to have appropriate NULL columns
inserted so that it actually matches the declared rowtype. It seemed
convenient to use a JunkFilter for this, so I made some cleanups and
simplifications in the JunkFilter code to allow it to support this
additional functionality. (That in turn exposed a latent bug in
nodeAppend.c, which is that it was returning a tuple slot whose
descriptor didn't match its data.) Also, move check_sql_fn_retval
out of pg_proc.c and into functions.c, where it seems to more naturally
belong.
(1) Replace while loop with the new forboth() construct in
parser/analyze.c
(2) Replace lcons() with lappend() in SearchCatCacheList(). Since these
now have the same performance, there is no reason to prefer lcons() in
this case, and using lappend() leads to cleaner code.
(3) Improve the name of the second parameter to for_each_cell()
presence of dropped columns. Document the already-presumed fact that
eref aliases in relation RTEs are supposed to have entries for dropped
columns; cause the user alias structs to have such entries too, so that
there's always a one-to-one mapping to the underlying physical attnums.
Adjust expandRTE() and related code to handle the case where a column
that is part of a JOIN has been dropped. Generalize expandRTE()'s API
so that it can be used in a couple of places that formerly rolled their
own implementation of the same logic. Fix ruleutils.c to suppress
display of aliases for columns that were dropped since the rule was made.
to the physical layout of the rowtype, ie, there are dummy arguments
corresponding to any dropped columns in the rowtype. We formerly had a
couple of places that did it this way and several others that did not.
Fixes Gaetano Mendola's "cache lookup failed for type 0" bug of 5-Aug.
executed. Previously, the DECLARE would succeed but subsequent FETCHes
would fail since the parameter values supplied to DECLARE were not
propagated to the portal created for the cursor.
In support of this, add type Oids to ParamListInfo entries, which seems
like a good idea anyway since code that extracts a value can double-check
that it got the type of value it was expecting.
Oliver Jowett, with minor editorialization by Tom Lane.
SAVEPOINT/RELEASE/ROLLBACK-TO syntax. (Alvaro)
Cause COMMIT of a failed transaction to report ROLLBACK instead of
COMMIT in its command tag. (Tom)
Fix a few loose ends in the nested-transactions stuff.
live in database or schema's default tablespace, as per today's discussion.
Also, remove some unused keywords from the grammar (PATH, PENDANT,
VERSION), and fix ALSO, which was added as a keyword but not added
to the keyword classification lists, thus making it worse-than-reserved.
aggregates, conversions, functions, operators, operator classes,
schemas, types, and tablespaces. Fold the existing implementations
of alter domain owner and alter database owner in with these.
Christopher Kings-Lynne
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
1. Solve the problem of not having TOAST references hiding inside composite
values by establishing the rule that toasting only goes one level deep:
a tuple can contain toasted fields, but a composite-type datum that is
to be inserted into a tuple cannot. Enforcing this in heap_formtuple
is relatively cheap and it avoids a large increase in the cost of running
the tuptoaster during final storage of a row.
2. Fix some interesting problems in expansion of inherited queries that
reference whole-row variables. We never really did this correctly before,
but it's now relatively painless to solve by expanding the parent's
whole-row Var into a RowExpr() selecting the proper columns from the
child.
If you dike out the preventive check in CheckAttributeType(),
composite-type columns now seem to actually work. However, we surely
cannot ship them like this --- without I/O for composite types, you
can't get pg_dump to dump tables containing them. So a little more
work still to do.
It was necessary to touch in grammar and create a new node to make home
to the new syntax. The command is also supported in E
CPG. Doc updates are attached too. Only superusers can change the owner
of the database. New owners don't need any aditional
privileges.
Euler Taveira de Oliveira
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
directly to the appropriate per-node execution function, using a function
pointer stored by ExecInitExpr. This speeds things up by eliminating one
level of function call. The function-pointer technique also enables further
small improvements such as only making one-time tests once (and then
changing the function pointer). Overall this seems to gain about 10%
on evaluation of simple expressions, which isn't earthshaking but seems
a worthwhile gain for a relatively small hack. Per recent discussion
on pghackers.
when scanning a table that we need all the columns from. In case of
SELECT INTO, we have to check that the hasoids flag matches the desired
output type, too. Per report from Mike Mascari.
for sure...). Rather than relying on the query context of a rangetable
entry to identify what permissions it wants checked, store a full AclMode
mask in each RTE, and check exactly those bits. This allows an RTE
specifying, say, INSERT privilege on a view to be copied into a derived
UPDATE query without changing meaning. Per recent discussion thread.
initdb forced due to change of stored rule representation.
intended to allow application authors to insulate themselves from
changes to the default value of 'default_with_oids' in future releases
of PostgreSQL.
This patch also fixes a bug in the earlier implementation of the
'default_with_oids' GUC variable: code in gram.y should not examine
the value of GUC variables directly due to synchronization issues.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
regular qpqual ('filter condition'), add special-purpose code to
nodeIndexscan.c to recheck them. This ends being almost no net addition
of code, because the removal of planner code balances out the extra
executor code, but it is significantly more efficient when a lossy
operator is involved in an OR indexscan. The old implementation had
to recheck the entire indexqual in such cases.
with index qual clauses in the Path representation. This saves a little
work during createplan and (probably more importantly) allows reuse of
cached selectivity estimates during indexscan planning. Also fix latent
bug: wrong plan would have been generated for a 'special operator' used
in a nestloop-inner-indexscan join qual, because the special operator
would not have gotten into the list of quals to recheck. This bug is
only latent because at present the special-operator code could never
trigger on a join qual, but sooner or later someone will want to do it.
join conditions in which each OR subclause includes a constraint on
the same relation. This implements the other useful side-effect of
conversion to CNF format, without its unpleasant side-effects. As
per pghackers discussion of a few weeks ago.
teaching the latter to accept either RestrictInfo nodes or bare
clause expressions; and cache the selectivity result in the RestrictInfo
node when possible. This extends the caching behavior of approx_selectivity
to many more contexts, and should reduce duplicate selectivity
calculations.
first time generate an OR indexscan for a two-column index when the WHERE
condition is like 'col1 = foo AND (col2 = bar OR col2 = baz)' --- before,
the OR had to be on the first column of the index or we'd not notice the
possibility of using it. Some progress towards extracting OR indexscans
from subclauses of an OR that references multiple relations, too, although
this code is #ifdef'd out because it needs more work.
fields: now they are valid whenever the clause is a binary opclause,
not only when it is a potential join clause (there is a new boolean
field canjoin to signal the latter condition). This lets us avoid
recomputing the relid sets over and over while examining indexes.
Still more work to do to make this as useful as it could be, because
there are places that could use the info but don't have access to the
RestrictInfo node.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
the hashclauses field of the parent HashJoin. This avoids problems with
duplicated links to SubPlans in hash clauses, as per report from
Andrew Holm-Hansen.
large objects. Dump all these in pg_dump; also add code to pg_dump
user-defined conversions. Make psql's large object code rely on
the backend for inserting/deleting LOB comments, instead of trying to
hack pg_description directly. Documentation and regression tests added.
Christopher Kings-Lynne, code reviewed by Tom
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
handling many-way scans: instead of re-evaluating all prior indexscan
quals to see if a tuple has been fetched more than once, use a hash table
indexed by tuple CTID. But fall back to the old way if the hash table
grows to exceed SortMem.
as well as the hash function (formerly the comparison function was hardwired
as memcmp()). This makes it possible to eliminate the special-purpose
hashtable management code in execGrouping.c in favor of using dynahash to
manage tuple hashtables; which is a win because dynahash knows how to expand
a hashtable when the original size estimate was too small, whereas the
special-purpose code was too stupid to do that. (See recent gripe from
Stephan Szabo about poor performance when hash table size estimate is way
off.) Free side benefit: when using string_hash, the default comparison
function is now strncmp() instead of memcmp(). This should eliminate some
part of the overhead associated with larger NAMEDATALEN values.
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
It also works to create a non-polymorphic aggregate from polymorphic
functions, should you want to do that. Regression test added, docs still
lacking. By Joe Conway, with some kibitzing from Tom Lane.
node emits only those vars that are actually needed above it in the
plan tree. (There were comments in the code suggesting that this was
done at some point in the dim past, but for a long time we have just
made join nodes emit everything that either input emitted.) Aside from
being marginally more efficient, this fixes the problem noted by Peter
Eisentraut where a join above an IN-implemented-as-join might fail,
because the subplan targetlist constructed in the latter case didn't
meet the expectation of including everything.
Along the way, fix some places that were O(N^2) in the targetlist
length. This is not all the trouble spots for wide queries by any
means, but it's a step forward.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
some cases of redundant clauses that were formerly not caught. We have
to special-case this because the clauses involved never get attached to
the same join restrictlist and so the existing logic does not notice
that they are redundant.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
introducing new 'FastList' list-construction subroutines to use in
hot spots. This avoids the O(N^2) behavior of repeated lappend's
by keeping a tail pointer, while not changing behavior by reversing
list order as the lcons() method would do.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
entire contents of the subplan into the tuplestore before we can return
any tuples. Instead, the tuplestore holds what we've already read, and
we fetch additional rows from the subplan as needed. Random access to
the previously-read rows works with the tuplestore, and doesn't affect
the state of the partially-read subplan. This is a step towards fixing
the problems with cursors over complex queries --- we don't want to
stick in Materialize nodes if they'll prevent quick startup for a cursor.
On Wed, 2003-01-08 at 21:59, Christopher Kings-Lynne wrote:
> I agree. I want to remove OIDs from heaps of our tables when we go to 7.3.
> I'd rather not have to do it in the dump due to down time.
Rod Taylor <rbt@rbt.ca>
codes, per discussion from last March. parse.h should now be included
*only* by gram.y, scan.l, keywords.c, parser.c. This prevents surprising
misbehavior after seemingly-trivial grammar adjustments.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
locParam lists can be converted to bitmapsets to speed updating. Also,
replace 'locParam' with 'allParam', which contains all the paramIDs
relevant to the node (i.e., the union of extParam and locParam); this
saves a step during SetChangedParamList() without costing anything
elsewhere.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
nodes where it's not really necessary. In many cases where the scan node
is not the topmost plan node (eg, joins, aggregation), it's possible to
just return the table tuple directly instead of generating an intermediate
projection tuple. In preliminary testing, this reduced the CPU time
needed for 'SELECT COUNT(*) FROM foo' by about 10%.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
of known-equal expressions includes any constant expressions (including
Params from outer queries), we actively suppress any 'var = var'
clauses that are or could be deduced from the set, generating only the
deducible 'var = const' clauses instead. The idea here is to push down
the restrictions implied by the equality set to base relations whenever
possible. Once we have applied the 'var = const' clauses, the 'var = var'
clauses are redundant, and should be suppressed both to save work at
execution and to avoid double-counting restrictivity.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
costs for expression evaluation, not only per-tuple cost as before.
This extension is needed in order to deal realistically with hashed or
materialized sub-selects.
Simplify SubLink by storing just a List of operator OIDs, instead of
a list of incomplete OpExprs --- that was a bizarre and bulky choice,
with no redeeming social value since we have to build new OpExprs
anyway when forming the plan tree.
'NOT (x IN (subselect))', that is 'NOT (x = ANY (subselect))',
rather than 'x <> ALL (subselect)' as we formerly did. This
opens the door to optimizing NOT IN the same way as IN, whereas
there's no hope of optimizing the expression using <>. Also,
convert 'x <> ALL (subselect)' to the NOT(IN) style, so that
the optimization will be available when processing rules dumped
by older Postgres versions.
initdb forced due to small change in SubLink node representation.
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
practice of evaluating MemSet's arguments multiple times, except for
the special case of newNode(), where we can assume the argument is
a constant sizeof() operator.
Also, add GetMemoryChunkContext() to mcxt.c's API, in preparation for
fixing recent GEQO breakage.
given any malloc block until something is first allocated in it; but
thereafter, MemoryContextReset won't release that first malloc block.
This preserves the quick-reset property of the original policy, without
forcing 8K to be allocated to every context whether any of it is ever
used or not. Also, remove some more no-longer-needed explicit freeing
during ExecEndPlan.
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
logic, dissuade planner from thinking that 'x IS DISTINCT FROM 42' may
be optimized into 'x = 42' (!!), cause dependency on = operator to be
recorded correctly, minor other improvements.
instead of only one. This should speed up planning (only one hash path
to consider for a given pair of relations) as well as allow more effective
hashing, when there are multiple hashable joinclauses.
sublink results and COPY's domain constraint checking. A Const that
isn't really constant is just a Bad Idea(tm). Remove hacks in
parse_coerce and other places that were needed because of the former
klugery.
just done for copyfuncs/equalfuncs. Read functions in particular get
a lot shorter than before, and it's much easier to compare an out function
with the corresponding read function to make sure they agree.
initdb forced due to small changes in nodestring format (regularizing
a few cases that were formerly idiosyncratic).
joinclauses is determined accurately for each join. Formerly, the code only
considered joinclauses that used all of the rels from the outer side of the
join; thus for example
FROM (a CROSS JOIN b) JOIN c ON (c.f1 = a.x AND c.f2 = b.y)
could not exploit a two-column index on c(f1,f2), since neither of the
qual clauses would be in the joininfo list it looked in. The new code does
this correctly, and also is able to eliminate redundant clauses, thus fixing
the problem noted 24-Oct-02 by Hans-Jürgen Schönig.
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
one more row from the subplan than the COUNT would appear to require.
This costs a little more logic but a number of people have complained
about the old implementation.
of groups produced by GROUP BY. This improves the accuracy of planning
estimates for grouped subselects, and is needed to check whether a
hashed aggregation plan risks memory overflow.
- CLUSTER ALL clusters all the tables that have some index with
indisclustered set and the calling user owns.
- CLUSTER tablename clusters the named table, using the index with
indisclustered set. If no index has the bit set, throws elog(ERROR).
- The multi-relation version (CLUSTER ALL) uses a multitransaction
approach, similar to what VACUUM does.
Alvaro Herrera
before commit, not after :-( --- the original coding is not only unsafe
if an error occurs while it's processing, but it generates an invalid
sequence of WAL entries. Resurrect 7.2 logic for deleting items when
no longer needed. Use an enum instead of random macros. Editorialize
on names used for routines and constants. Teach backend/nodes routines
about new field in CreateTable struct. Add a regression test.
node now does its own grouping of the input rows, and has no need for a
preceding GROUP node in the plan pipeline. This allows elimination of
the misnamed tuplePerGroup option for GROUP, and actually saves more code
in nodeGroup.c than it costs in nodeAgg.c, as well as being presumably
faster. Restructure the API of query_planner so that we do not commit to
using a sorted or unsorted plan in query_planner; instead grouping_planner
makes the decision. (Right now it isn't any smarter than query_planner
was, but that will change as soon as it has the option to select a hash-
based aggregation step.) Despite all the hackery, no initdb needed since
only in-memory node types changed.
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
type for runtime constraint checks, instead of misusing the parse-time
Constraint node for the purpose. Fix some damage introduced into type
coercion logic; in particular ensure that a coerced expression tree will
read out the correct result type when inspected (patch had broken some
RelabelType cases). Enforce domain NOT NULL constraints against columns
that are omitted from an INSERT.
column additions, deletions, and renames that would let a child table
get out of sync with its parent. Patch by Alvaro Herrera, with some
kibitzing by Tom Lane.
array header, and to compute sizing and alignment of array elements
the same way normal tuple access operations do --- viz, using the
tupmacs.h macros att_addlength and att_align. This makes the world
safe for arrays of cstrings or intervals, and should make it much
easier to write array-type-polymorphic functions; as examples see
the cleanups of array_out and contrib/array_iterator. By Joe Conway
and Tom Lane.
latent wrong-struct-type bugs and makes the coding style more uniform,
since the majority of places working with lists of column names were
already using Strings not Idents. While at it, remove vestigial
support for Stream node type, and otherwise-unreferenced nodes.h entries
for T_TupleCount and T_BaseNode.
NB: full recompile is recommended due to changes of Node type numbers.
This shouldn't force an initdb though.
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
to make a reasonable attempt at accounting for palloc overhead, not just
the requested size of each memory chunk. Since in many scenarios this
will make for a significant reduction in the amount of space acquired,
partially compensate by doubling the default value of SORT_MEM to 1Mb.
Per discussion in pgsql-general around 9-Jun-2002..
types for Table Functions, as previously proposed on HACKERS. Here is a
brief explanation:
1. Creates a new pg_type typtype: 'p' for pseudo type (currently either
'b' for base or 'c' for catalog, i.e. a class).
2. Creates new builtin type of typtype='p' named RECORD. This is the
first of potentially several pseudo types.
3. Modify FROM clause grammer to accept:
SELECT * FROM my_func() AS m(colname1 type1, colname2 type1, ...)
where m is the table alias, colname1, etc are the column names, and
type1, etc are the column types.
4. When typtype == 'p' and the function return type is RECORD, a list
of column defs is required, and when typtype != 'p', it is
disallowed.
5. A check was added to ensure that the tupdesc provide via the parser
and the actual return tupdesc match in number and type of
attributes.
When creating a function you can do:
CREATE FUNCTION foo(text) RETURNS setof RECORD ...
When using it you can do:
SELECT * from foo(sqlstmt) AS (f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) AS f(f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) f(f1 int, f2 text, f3 timestamp)
Included in the patches are adjustments to the regression test sql and
expected files, and documentation.
p.s.
This potentially solves (or at least improves) the issue of builtin
Table Functions. They can be bootstrapped as returning RECORD, and
we can wrap system views around them with properly specified column
defs. For example:
CREATE VIEW pg_settings AS
SELECT s.name, s.setting
FROM show_all_settings()AS s(name text, setting text);
Then we can also add the UPDATE RULE that I previously posted to
pg_settings, and have pg_settings act like a virtual table, allowing
settings to be queried and set.
Joe Conway
functionality of the command is basically identical to that of
BEGIN; it just accepts a few extra options (only one of which
PostgreSQL currently implements), and is standards-compliant.
The patch includes a simple regression test and documentation.
[ Regression tests removed, per Peter.]
Neil Conway
'tioga recipes', whatever those are -- Peter E. killed most
of it a couple days ago, but this patch removes the rest. Most
of it was #ifdef'ed out anyway.
Neil Conway
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
pg_language.lancompiler
pg_operator.oprprec
pg_operator.oprisleft
pg_proc.proimplicit
pg_proc.probyte_pct
pg_proc.properbyte_cpu
pg_proc.propercall_cpu
pg_proc.prooutin_ratio
pg_shadow.usetrace
pg_type.typprtlen
pg_type.typreceive
pg_type.typsend
Attempts to use the obsoleted attributes of pg_operator or pg_proc
in the CREATE commands will be greeted by a warning. For pg_type,
there is no warning (yet) because pg_dump scripts still contain these
attributes.
Also remove new but already obsolete spellings
isVolatile, isStable, isImmutable in WITH clause. (Use new syntax
instead.)
extension to create binary compatible casts. Includes dependency tracking
as well.
pg_proc.proimplicit is now defunct, but will be removed in a separate
commit.
pg_dump provides a migration path from the previous scheme to declare
casts. Dumping binary compatible casts is currently impossible, though.
COPY x (a,d,c,b) from stdin;
COPY x (a,c) to stdout;
as well as the corresponding changes to pg_dump to use the new
functionality. This functionality is not available when using
the BINARY option. If a column is not specified in the COPY FROM
statement, its default values will be used.
In addition to this functionality, I tweaked a couple of the
error messages emitted by the new COPY <options> checks.
Brent Verner
Implements between (symmetric / asymmetric) as a node.
Executes the left or right expression once, makes a Const out of the
resulting Datum and executes the >=, <= portions out of the Const sets.
Of course, the parser does a fair amount of preparatory work for this to
happen.
Rod Taylor
pg_relcheck is gone; CHECK, UNIQUE, PRIMARY KEY, and FOREIGN KEY
constraints all have real live entries in pg_constraint. pg_depend
exists, and RESTRICT/CASCADE options work on most kinds of DROP;
however, pg_depend is not yet very well populated with dependencies.
(Most of the ones that are present at this point just replace formerly
hardwired associations, such as the implicit drop of a relation's pg_type
entry when the relation is dropped.) Need to add more logic to create
dependency entries, improve pg_dump to dump constraints in place of
indexes and triggers, and add some regression tests.
This is the first cut toward CREATE CONVERSION/DROP CONVERSION implementaion.
The commands can now add/remove tuples to the new pg_conversion system
catalog, but that's all. Still need work to make them actually working.
Documentations, regression tests also need work.
Reused the Expr node to hold DISTINCT which strongly resembles
the existing OP info. Define DISTINCT_EXPR which strongly resembles
the existing OPER_EXPR opType, but with handling for NULLs required
by SQL99.
We have explicit support for single-element DISTINCT comparisons
all the way through to the executor. But, multi-element DISTINCTs
are handled by expanding into a comparison tree in gram.y as is done for
other row comparisons. Per discussions, it might be desirable to move
this into one or more purpose-built nodes to be handled in the backend.
Define the optional ROW keyword and token per SQL99.
This allows single-element row constructs, which were formerly disallowed
due to shift/reduce conflicts with parenthesized a_expr clauses.
Define the SQL99 TREAT() function. Currently, use as a synonym for CAST().
RESTRICT/CASCADE syntax to the DROP commands that need it, and propagates
the behavioral option through the parser to the routines that execute
drops. Doesn't do anything useful yet, but I figured I'd commit these
changes so I could get out of the parser area while working on the rest.
function body (and other properties) as a function in the language
is created. This generalizes ad hoc code that already existed for
the built-in languages.
The validation now happens after the pg_proc tuple of the new function
is created, so it is possible to define recursive SQL functions.
Add some regression test cases that cover bogus function definition
attempts.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
returns-set boolean field in Func and Oper nodes. This allows cleaner,
more reliable tests for expressions returning sets in the planner and
parser. For example, a WHERE clause returning a set is now detected
and complained of in the parser, not only at runtime.
some kibitzing from Tom Lane. Not everything works yet, and there's
no documentation or regression test, but let's commit this so Joe
doesn't need to cope with tracking changes in so many files ...
lists to join RTEs, attach a list of Vars and COALESCE expressions that will
replace the join's alias variables during planning. This simplifies
flatten_join_alias_vars while still making it easy to fix up varno references
when transforming the query tree. Add regression test cases for interactions
of subqueries with outer joins.
left a stub for a future "ALTER RULE RENAME" but did not write that one
yet. Bruce, if you want to add my name for for that I'll take it and do
it later.
Joe Conway
different privilege bits (might as well make use of the space we were
wasting on padding). EXECUTE and USAGE bits for procedures, languages
now are separate privileges instead of being overlaid on SELECT. Add
privileges for namespaces and databases. The GRANT and REVOKE commands
work for these object types, but we don't actually enforce the privileges
yet...
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
an 'opclass owner' column in pg_opclass. Nothing is done with it at
present, but since there are plans to invent a CREATE OPERATOR CLASS
command soon, we'll probably want DROP OPERATOR CLASS too, which
suggests that a notion of ownership would be a good idea.
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
addRangeTableEntry calls. Remove relname field from RTEs, since
it will no longer be a useful unique identifier of relations;
we want to encourage people to rely on the relation OID instead.
Further work on dumping qual expressions in EXPLAIN, too.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
Tom Lane
Neil Conway
PostgreSQL Daemon
Bruce Momjian
Tatsuo Ishii
Peter Eisentraut
Thomas G. Lockhart