Addition of the catalog/pg_foo_d.h headers seems to have pushed us over
the brink of the maximum command line length for some older platforms
during "make install" for our header files. The main culprit here is
repetition of the target directory path, which could be long.
Rearrange so that we don't repeat that once per file, but only once
per subdirectory.
Per buildfarm.
Discussion: https://postgr.es/m/E1f5Dwm-0004n5-7O@gemulon.postgresql.org
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
The atomics code asserts proper alignment in various places. That's
mainly because the alignment of 64bit integers is not sufficient for
atomic operations on all platforms. Some ABIs only have four byte
alignment, but don't have atomic behavior when crossing page
boundaries.
The flags code isn't affected by that however, as the type alignment
always is sufficient for atomic operations. Nevertheless the code
asserted alignment requirements. Before 8c3debbb it was only broken on
hppa, after it probably affect further platforms.
Thus remove the assertions for pg_atomic_flag operators.
Per buildfarm animal pademelon.
Discussion: https://postgr.es/m/7223.1523124425@sss.pgh.pa.us
Backpatch: 9.5-
Under EXEC BACKEND we also need to be going through the group privileges
setup since we do support that on Unixy systems, so add that to
SubPostmasterMain().
Under Windows, we need to simply return true from
GetDataDirectoryCreatePerm(), but that wasn't happening due to a missing
#else clause.
Per buildfarm.
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
This works very much like the existing bms_last_member function, only it
traverses through the Bitmapset in the opposite direction from the most
significant bit down to the least significant bit. A special prevbit value of
-1 may be used to have the function determine the most significant bit. This
is useful for starting a loop. When there are no members less than prevbit,
the function returns -2 to indicate there are no more members.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-K=3d5MDASNYFJpUpc20xcBnAwNC1-AOeunhn0OtkWbQ@mail.gmail.com
When an update moves a row between partitions (supported since
2f17844104), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me
Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
We need to wait for the initial sync of all subscriptions. On
some (faster?) machines, this didn't make a difference, but
the (slower?) buildfarm machines are upset.
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Hash index searches acquire predicate locks on the primary
page of a bucket. It acquires a lock on both the old and new buckets
for scans that happen concurrently with page splits. During a bucket
split, a predicate lock is copied from the primary page of an old
bucket to the primary page of a new bucket.
Author: Shubham Barai, Amit Kapila
Reviewed by: Amit Kapila, Alexander Korotkov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPvNsM2GTiXdRgaaZ1Pjd1bs+sxfFsf7Ytr+iq+5JJoYXA@mail.gmail.com
The tests added as part of 9fdb675fc5 yield differing results
depending on endianess, causing buildfarm failures. As the differences
are expected, split the hash partitioning tests into a different file
and maintain alternative output. The separate file is so the amount of
duplicated output is reduced.
David produced the alternative output without a machine to test on, so
it's possible this'll require a buildfarm cycle or two to get right.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-6f4c2Qhuipe-GY7BKmFd0FMBobRnLS7hVCoAmTszsBg@mail.gmail.com
The atomics fallback implementation for pg_atomic_flag was broken,
returning the inverted value from pg_atomic_test_set_flag(). This was
unnoticed because a) atomic flags were unused until recently b) the
test code wasn't run when the fallback implementation was in
use (because it didn't allow to test for some edge cases).
Fix the bug, and improve the fallback so it has the same behaviour as
the non-fallback implementation in the problematic edge cases. That
breaks ABI compatibility in the back branches when fallbacks are in
use, but given they were broken until now...
Author: Andres Freund
Reported-by: Daniel Gustafsson
Discussion:
https://postgr.es/m/FB948276-7B32-4B77-83E6-D00167F8EEB4@yesql.sehttps://postgr.es/m/20180406233854.uni2h3mbnveczl32@alap3.anarazel.de
Backpatch: 9.5-, where the atomics abstraction was introduced.
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
This has no functional impact whatsoever. However, it causes
these unnecessary quote marks to disappear from the generated
postgres.bki file, making it easier to verify that the upcoming
bootstrap data conversion patch doesn't change the generated file.
These tests accummulated almost a gigabyte of data during the test which
was then removed at the end. Instead, remove output that's no longer
needed between the individual tests, to keep the total disk usage down
lower.
Author: Michael Banck
Add a new module backend/partitioning/partprune.c, implementing a more
sophisticated algorithm for partition pruning. The new module uses each
partition's "boundinfo" for pruning instead of constraint exclusion,
based on an idea proposed by Robert Haas of a "pruning program": a list
of steps generated from the query quals which are run iteratively to
obtain a list of partitions that must be scanned in order to satisfy
those quals.
At present, this targets planner-time partition pruning, but there exist
further patches to apply partition pruning at execution time as well.
This commit also moves some definitions from include/catalog/partition.h
to a new file include/partitioning/partbounds.h, in an attempt to
rationalize partitioning related code.
Authors: Amit Langote, David Rowley, Dilip Kumar
Reviewers: Robert Haas, Kyotaro Horiguchi, Ashutosh Bapat, Jesper Pedersen.
Discussion: https://postgr.es/m/098b9c71-1915-1a2a-8d52-1a7a50ce79e8@lab.ntt.co.jp
This provides a newer version of adminpack which works with the newly
added default roles to support GRANT'ing to non-superusers access to
read and write files, along with related functions (unlinking files,
getting file length, renaming/removing files, scanning the log file
directory) which are supported through adminpack.
Note that new versions of the functions are required because an
environment might have an updated version of the library but still have
the old adminpack 1.0 catalog definitions (where EXECUTE is GRANT'd to
PUBLIC for the functions).
This patch also removes the long-deprecated alternative names for
functions that adminpack used to include and which are now included in
the backend, in adminpack v1.1. Applications using the deprecated names
should be updated to use the backend functions instead. Existing
installations which continue to use adminpack v1.0 should continue to
function until/unless adminpack is upgraded.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This patch adds new default roles named 'pg_read_server_files',
'pg_write_server_files', 'pg_execute_server_program' which
allow an administrator to GRANT to a non-superuser role the ability to
access server-side files or run programs through PostgreSQL (as the user
the database is running as). Having one of these roles allows a
non-superuser to use server-side COPY to read, write, or with a program,
and to use file_fdw (if installed by a superuser and GRANT'd USAGE on
it) to read from files or run a program.
The existing misc file functions are also changed to allow a user with
the 'pg_read_server_files' default role to read any files on the
filesystem, matching the privileges given to that role through COPY and
file_fdw from above.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
This removes the explicit superuser checks in the various file-access
functions in the backend, specifically pg_ls_dir(), pg_read_file(),
pg_read_binary_file(), and pg_stat_file(). Instead, EXECUTE is REVOKE'd
from public for these, meaning that only a superuser is able to run them
by default, but access to them can be GRANT'd to other roles.
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20171231191939.GR2416%40tamriel.snowman.net
The previous coding inadvertently checked the constraints for the
partitioned table rather than the target partition, which could
lead to data in a partition that fails to satisfy some constraint
on that partition. This problem seems to date back to when
table partitioning was introduced; prior to that, there was only
one target table for a COPY, so the problem didn't occur, and the
code just didn't get updated.
Etsuro Fujita, reviewed by Amit Langote and Ashutosh Bapat
Discussion: https://postgr.es/message-id/5ABA4074.1090500%40lab.ntt.co.jp
We don't actually need the insert-or-update logic, so it's clearer to
have separate functions for the inserting and updating.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
In case the subscription is removed before the worker is fully started,
give a specific error message instead of the generic "cache lookup"
error.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
A normal SQL command run inside PL/pgSQL acquires a snapshot, but SET
TRANSACTION does not work anymore if a snapshot is set. So we have to
handle this separately.
Reviewed-by: Alexander Korotkov <a.korotkov@postgrespro.ru>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
If we are not going to save the plan, then we need to unset expr->plan
after we are done, also in error cases. Otherwise, we get a dangling
pointer next time around.
This is not the ideal solution. It would be better if we could convince
SPI not to associate a cached plan with a resource owner, and then we
could just save the plan in all cases. But that would require bigger
surgery.
Reported-by: Pavel Stehule <pavel.stehule@gmail.com>
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
Error-tolerant conversion function with web-like syntax for search query,
it simplifies constraining search engine with close to habitual interface for
users.
Bump catalog version
Authors: Victor Drobny, Dmitry Ivanov with editorization by me
Reviewed by: Aleksander Alekseev, Tomas Vondra, Thomas Munro, Aleksandr Parfenov
Discussion: https://www.postgresql.org/message-id/flat/fe931111ff7e9ad79196486ada79e268@postgrespro.ru
857f9c36 bumps B-tree metapage version while upgrade is performed "on the fly"
when needed. However, some asserts fired when old version metapage was
cached to rel->rd_amcache. Despite new metadata fields are never used from
rel->rd_amcache, that needs to be fixed. This patch introduces metadata
upgrade during its caching, which fills unavailable fields with their default
values. contrib/pageinspect is also patched to handle non-upgraded metapages
in the same way.
Author: Alexander Korotkov
Review comments from Andres Freund
* Consolidate code into AfterTriggerGetTransitionTable()
* Rename nodeMerge.c to execMerge.c
* Rename nodeMerge.h to execMerge.h
* Move MERGE handling in ExecInitModifyTable()
into a execMerge.c ExecInitMerge()
* Move mt_merge_subcommands flags into execMerge.h
* Rename opt_and_condition to opt_merge_when_and_condition
* Wordsmith various comments
Author: Pavan Deolasee
Reviewer: Simon Riggs
Maintainers of out-of-tree PLs typically need access to the set of
error codes. To avoid the need to duplicate that information in some
form in PL source trees, provide errcodes.txt as part of a server
installation.
Thomas Munro, based on a suggestion from Andrew Gierth
Discussion: https://postgr.es/m/87woykk7mu.fsf%40news-spur.riddles.org.uk
This is a blind fix, since I don't have SE-Linux to verify it.
Per unwanted change in rhinoceros, running sepgsql tests. Noted by Tom
Lane.
Discussion: https://postgr.es/m/32347.1522865050@sss.pgh.pa.us
This reworks how the tests to run are defined. Instead of having to
define all runs for all tests, we define those tests which should pass
(generally using one of the defined broad hashes), add in any which
should be specific for this test, and exclude any specific runs that
shouldn't pass for this test. This ends up removing some 4k+ lines
(more than half the file) but, more importantly, greatly simplifies the
way runs-to-be-tested are defined.
As discussed in the updated comments, for example, take the test which
does CREATE TABLE test_table. That CREATE TABLE should show up in all
'full' runs of pg_dump, except those cases where 'test_table' is
excluded, of course, and that's exactly how the test gets defined now
(modulo a few other related cases, like where we dump only that table,
or we dump the schema it's in, or we exclude the schema it's in):
like => {
%full_runs,
%dump_test_schema_runs,
only_dump_test_table => 1,
section_pre_data => 1, },
unlike => {
exclude_dump_test_schema => 1,
exclude_test_table => 1, }, },
Next, we no longer expect every run to be listed for every test. If a
run is listed in 'like' (directly or through a hash) then it's a 'like',
unless it's listed in 'unlike' in which case it's an 'unlike'. If it
isn't listed in either, then it's considered an 'unlike' automatically.
Lastly, this changes the code to no longer use like/unlike but rather to
use 'ok()' with 'diag()' which allows much more control over what gets
spit out to the screen. Gone are the days of the entire dump being sent
to the console, now you'll just get a couple of lines for each failing
test which say the test that failed and the run that it failed on.
This covers both the pg_dump TAP tests in src/bin/pg_dump and those in
src/test/modules/test_pg_dump.
BRIN indexes like to propagate additions of free space into the upper pages
of their free space maps as soon as the new space is known, even when it's
just on one individual index page. Previously this required calling
FreeSpaceMapVacuum, which is quite an expensive thing if the map is large.
Use the FreeSpaceMapVacuumRange function recently added by commit c79f6df75
to reduce the amount of work done for this purpose.
Fix a couple of places that neglected to do the upper-page vacuuming at all
after recording new free space. If the policy is to be that BRIN should do
that, it should do it everywhere.
Do RecordPageWithFreeSpace unconditionally in brin_page_cleanup, and do
FreeSpaceMapVacuum unconditionally in brin_vacuum_scan. Because of the
FSM's imprecise storage of free space, the old complications here seldom
bought anything, they just slowed things down. This approach also
provides a predictable path for FSM corruption to be repaired.
Remove premature RecordPageWithFreeSpace call in brin_getinsertbuffer
where it's about to return an extended page to the caller. The caller
should do that, instead, after it's inserted its new tuple. Fix the
one caller that forgot to do so.
Simplify logic in brin_doupdate's same-page-update case by postponing
brin_initialize_empty_new_buffer to after the critical section; I see
little point in doing it before.
Avoid repeat calls of RelationGetNumberOfBlocks in brin_vacuum_scan.
Avoid duplicate BufferGetBlockNumber and BufferGetPage calls in
a couple of places where we already had the right values.
Move a BRIN_elog debug logging call out of a critical section; that's
pretty unsafe and I don't think it buys us anything to not wait till
after the critical section.
Move the "*extended = false" step in brin_getinsertbuffer into the
routine's main loop. There's no actual bug there, since the loop can't
iterate with *extended still true, but it doesn't seem very future-proof
as coded; and it's certainly not documented as a loop invariant.
This is all from follow-on investigation inspired by commit c79f6df75.
Discussion: https://postgr.es/m/5801.1522429460@sss.pgh.pa.us
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
The code before the main loop, to handle the possible 1-7 unaligned bytes
at the beginning of the input, was broken, and read past the input, if the
the input was very short.
Hopefully fix the fact that these checks are unstable, by introducing
the corruption in a separate table from pg_class, and also explicitly
disable autovacuum on those tables. Also make sure PostgreSQL is
stopped while the corruption is introduced to avoid possible caching
effects.
Author: Michael Banck
ARMv8 introduced special CPU instructions for calculating CRC-32C. Use
them, when available, for speed.
Like with the similar Intel CRC instructions, several factors affect
whether the instructions can be used. The compiler intrinsics for them must
be supported by the compiler, and the instructions must be supported by the
target architecture. If the compilation target architecture does not
support the instructions, but adding "-march=armv8-a+crc" makes them
available, then we compile the code with a runtime check to determine if
the host we're running on supports them or not.
For the runtime check, use glibc getauxval() function. Unfortunately,
that's not very portable, but I couldn't find any more portable way to do
it. If getauxval() is not available, the CRC instructions will still be
used if the target architecture supports them without any additional
compiler flags, but the runtime check will not be available.
Original patch by Yuqi Gu, heavily modified by me. Reviewed by Andres
Freund, Thomas Munro.
Discussion: https://www.postgresql.org/message-id/HE1PR0801MB1323D171938EABC04FFE7FA9E3110%40HE1PR0801MB1323.eurprd08.prod.outlook.com
Trigger cloning to partitions was supposed to occur for user-visible
triggers only, but during development the protection that prevented it
from occurring to internal triggers was lost. Reinstate it, as well as
add a test case to ensure internal triggers (in the tested case,
triggers implementing a deferred unique constraint) are not cloned.
Without the code fix, the partitions in the test end up with different
numbers of triggers, which is clearly wrong ...
Bug in 86f575948c.
Discussion: https://postgr.es/m/20180403214903.ozfagwjcpk337uw7@alvherre.pgsql
Make buffer 1 byte larger to fit a sign. It's actually impossible for
there to be a sign in practice, but this is still required to keep GCC 7
happy.
Cleanup from commit 51bc271790.
Based on a suggestion from Peter Eisentraut.
Author: Peter Geoghegan
Reported-By: Peter Eisentraut
Discussion: https://postgr.es/m/d1cc82ed-d07d-cef2-7c00-2e987f121648@2ndquadrant.com
Previous coding was passing the wrong table's tuple descriptor, which
accidentally fails to fail because no existing test case exercises a
foreign key in which the referenced attributes are further to the right
of the referencing attributes.
Add a test so that further breakage is visible.
This got broken in 16828d5c02.
Discussion: https://postgr.es/m/20180403204723.fqte755nukgm42uf@alvherre.pgsql
We were being careless in some places about the order of -L switches in
link command lines, such that -L switches referring to external directories
could come before those referring to directories within the build tree.
This made it possible to accidentally link a system-supplied library, for
example /usr/lib/libpq.so, in place of the one built in the build tree.
Hilarity ensued, the more so the older the system-supplied library is.
To fix, break LDFLAGS into two parts, a sub-variable LDFLAGS_INTERNAL
and the main LDFLAGS variable, both of which are "recursively expanded"
so that they can be incrementally adjusted by different makefiles.
Establish a policy that -L switches for directories in the build tree
must always be added to LDFLAGS_INTERNAL, while -L switches for external
directories must always be added to LDFLAGS. This is sufficient to
ensure a safe search order. For simplicity, we typically also put -l
switches for the respective libraries into those same variables.
(Traditional make usage would have us put -l switches into LIBS, but
cleaning that up is a project for another day, as there's no clear
need for it.)
This turns out to also require separating SHLIB_LINK into two variables,
SHLIB_LINK and SHLIB_LINK_INTERNAL, with a similar rule about which
switches go into which variable. And likewise for PG_LIBS.
Although this change might appear to affect external users of pgxs.mk,
I think it doesn't; they shouldn't have any need to touch the _INTERNAL
variables.
In passing, tweak src/common/Makefile so that the value of CPPFLAGS
recorded in pg_config lacks "-DFRONTEND" and the recorded value of
LDFLAGS lacks "-L../../../src/common". Both of those things are
mistakes, apparently introduced during prior code rearrangements,
as old versions of pg_config don't print them. In general we don't
want anything that's specific to the src/common subdirectory to
appear in those outputs.
This is certainly a bug fix, but in view of the lack of field
complaints, I'm unsure whether it's worth the risk of back-patching.
In any case it seems wise to see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/25214.1522604295@sss.pgh.pa.us
The prefix operator along with SP-GiST indexes can be used as an alternative
for LIKE 'word%' commands and it doesn't have a limitation of string/prefix
length as B-Tree has.
Bump catalog version
Author: Ildus Kurbangaliev with some editorization by me
Review by: Arthur Zakirov, Alexander Korotkov, and me
Discussion: https://www.postgresql.org/message-id/flat/20180202180327.222b04b3@wp.localdomain
When base backups are run over the replication protocol (for example
using pg_basebackup), verify the checksums of all data blocks if
checksums are enabled. If checksum failures are encountered, log them
as warnings but don't abort the backup.
This becomes the default behaviour in pg_basebackup (provided checksums
are enabled on the server), so add a switch (-k) to disable the checks
if necessary.
Author: Michael Banck
Reviewed-By: Magnus Hagander, David Steele
Discussion: https://postgr.es/m/20180228180856.GE13784@nighthawk.caipicrew.dd-dns.de
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewers: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.comhttps://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Coverity complained about possible buffer overrun in two places added by
commit 1eb6d6527, and AFAICS it's reasonable to worry: even granting that
the WAL originator properly truncated the commit GID to GIDSIZE, we should
not really bet our lives on that having the same value as it does in the
current build. Hence, use strlcpy() not strcpy(), and adjust the pointer
advancement logic to be sure we skip over the whole source string even if
strlcpy() truncated it.
Recent commit 8a3d9425 has introduced be-secure-common.c, which is aimed
at including backend-side APIs that can be used by any SSL
implementation. The purpose is similar to fe-secure-common.c for the
frontend-side APIs.
However, this has forgotten to include check_ssl_key_file_permissions()
in the move, which causes a double dependency between be-secure.c and
be-secure-openssl.c.
Refactor the code in a more logical way. This also puts into light an
API which is usable by future SSL implementations for permissions on SSL
key files.
Author: Michael Paquier <michael@paquier.xyz>
Since commit 7012b132d0, postgres_fdw
has been able to push down the toplevel aggregation operation to the
remote server. Commit e2f1eb0ee3 made
it possible to break down the toplevel aggregation into one
aggregate per partition. This commit lets postgres_fdw push down
aggregation in that case just as it does at the top level.
In order to make this work, this commit adds an additional argument
to the GetForeignUpperPaths FDW API. A matching argument is added
to the signature for create_upper_paths_hook. Third-party code using
either of these will need to be updated.
Also adjust create_foreignscan_plan() so that it picks up the correct
set of relids in this case.
Jeevan Chalke, reviewed by Ashutosh Bapat and by me and with some
adjustments by me. The larger patch series of which this patch is a
part was also reviewed and tested by Antonin Houska, Rajkumar
Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik, Pascal
Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
Discussion: http://postgr.es/m/CAM2+6=XPWujjmj5zUaBTGDoB38CemwcPmjkRy0qOcsQj_V+2sQ@mail.gmail.com
round() is from C99. Use rint() instead. There are behavioral
differences between round() and rint(), but they should not matter to
the Bloom filter optimal_k() function. We already assume POSIX
behavior for rint(), so there is no question of rint() not using
"rounds towards nearest" as its rounding mode.
Cleanup from commit 51bc271790.
Per buildfarm member thrips.
Author: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzn76eCGUonARy-wrVtMHsf+4cvbK_oJAWTLfORTU5ki0w@mail.gmail.com
A Bloom filter is a space-efficient, probabilistic data structure that
can be used to test set membership. Callers will sometimes incur false
positives, but never false negatives. The rate of false positives is a
function of the total number of elements and the amount of memory
available for the Bloom filter.
Two classic applications of Bloom filters are cache filtering, and data
synchronization testing. Any user of Bloom filters must accept the
possibility of false positives as a cost worth paying for the benefit in
space efficiency.
This commit adds a test harness extension module, test_bloomfilter. It
can be used to get a sense of how the Bloom filter implementation
performs under varying conditions.
This is infrastructure for the upcoming "heapallindexed" amcheck patch,
which verifies the consistency of a heap relation against one of its
indexes.
Author: Peter Geoghegan
Reviewed-By: Andrey Borodin, Michael Paquier, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAH2-Wzm5VmG7cu1N-H=nnS57wZThoSDQU+F5dewx3o84M+jY=g@mail.gmail.com
Avoid storing the result of PQsocket() in a pgsocket variable; it's
declared as int, and the no-socket test is properly written as "x < 0"
not "x == PGINVALID_SOCKET". This accidentally had no bad effect
because we never got to init_slot() with a bad connection, but it's
still wrong.
Actually, it seems like we should avoid storing the result for a long
period at all. The function's not so expensive that it's worth avoiding,
and the existing coding technique here would fail if anyone tried to
PQreset the connection during the life of the program. Hence, just
re-call PQsocket every time we construct a select(2) mask.
Speaking of select(), GetIdleSlot imagined that it could compute the
select mask once and continue to use it over multiple calls to
select_loop(), which is pretty bogus since that would stomp on the
mask on return. This could only matter if the function's outer loop
iterated more than once, which is unlikely (it'd take some connection
receiving data, but not enough to complete its command). But if it
did happen, we'd acquire "tunnel vision" and stop watching the other
connections for query termination, with the effect of losing parallelism.
Another way in which GetIdleSlot could lose parallelism is that once
PQisBusy returns false, it would lock in on that connection and do
PQgetResult until that returns NULL; in some cases that could result
in blocking. (Perhaps this can never happen in vacuumdb due to the
limited set of commands that it can issue, but I'm not quite sure
of that, and even if true today it's not a future-proof assumption.)
Refactor the code to do that properly, so that it risks blocking in
PQgetResult only in cases where we need to wait anyway.
Another loss-of-parallelism problem, which *is* easily demonstrable,
is that any setup queries issued during prepare_vacuum_command() were
always issued on the last-to-be-created connection, whether or not
that was idle. Long-running operations on that connection thus
prevented issuance of additional operations on the other ones, except
in the limited cases where no preparatory query was needed. Instead,
wait till we've identified a free connection and use that one.
Also, avoid core dump due to undersized malloc request in the case
that no tables are identified to be vacuumed.
The bogus no-socket test was noted by CharSyam, the other problems
identified in my own code review. Back-patch to 9.5 where parallel
vacuumdb was introduced.
Discussion: https://postgr.es/m/CAMrLSE6etb33-192DTEUGkV-TsvEcxtBDxGWG1tgNOMnQHwgDA@mail.gmail.com
Compilation failed for lack of an #ifdef on builds without
pg_strong_random(). Also fix relevant error messages to meet
project style guidelines.
Fabien Coelho, further adjusted by me
Discussion: https://postgr.es/m/32390.1522464534@sss.pgh.pa.us
So far as I can find, NI_MAXHOST isn't actually required anywhere by
POSIX. Nonetheless, commit 9a895462d supposed that it could rely on
having that symbol without any ceremony at all. We do have a hack
for providing it if the platform doesn't, in getaddrinfo.h, so fix
the problem by #including that file. Per buildfarm.
In 9956ddc191, ten years ago, the
current objfile.txt based linking model was introduced. It's time to
retire the old SUBSYS.o based model.
This primarily is pertinent because the bitcode files for LLVM based
inlining are not produced when using PARTIAL_LINKING. It does not seem
worth to fix PARTIAL_LINKING to support that.
Author: Andres Freund
Discussion: https://postgr.es/m/20180121204356.d5oeu34jetqhmdv2@alap3.anarazel.de
LockViewRecurese() obtains view relation using heap_open() and passes
it to get_view_query() to get view info. It immediately closes the
relation then uses the returned view info by calling
LockViewRecurse_walker(). Since get_view_query() returns a pointer
within the relcache, the relcache should be kept until
LockViewRecurse_walker() returns. Otherwise the relation could point
to a garbage memory area.
Fix is moving the heap_close() call after LockViewRecurse_walker().
Problem reported by Tom Lane (buildfarm is unhappy, especially prion
since it enables -DRELCACHE_FORCE_RELEASE cpp flag), fix by me.
A followup patch will add a SKIP_LOCKED option. To avoid introducing
evermore arguments, breaking existing callers each time, introduce a
flags argument. This'll no doubt break a few external users...
Also change the MISSING_OK behaviour so a DEBUG1 debug message is
emitted when a relation is not found.
Author: Nathan Bossart
Reviewed-By: Michael Paquier and Andres Freund
Discussion: https://postgr.es/m/20180306005349.b65whmvj7z6hbe2y@alap3.anarazel.de
Previously there was no way in the standby side to find out the host and port
of the sender server that the walreceiver was currently connected to when
multiple hosts and ports were specified in primary_conninfo. For that purpose,
this patch adds sender_host and sender_port columns into pg_stat_wal_receiver
view. They report the host and port that the active replication connection
currently uses.
Bump catalog version.
Author: Haribabu Kommi
Reviewed-by: Michael Paquier and me
Discussion: https://postgr.es/m/CAJrrPGcV_aq8=cdqkFhVDJKEnDQ70yRTTdY9RODzMnXNrCz2Ow@mail.gmail.com
Richard Yen reported that pg_upgrade failed if the target cluster had
force_parallel_mode = on, because binary_upgrade_create_empty_extension()
is marked parallel restricted, allowing it to be executed in parallel
mode, which complains because it tries to acquire an XID.
In general, no function that might try to modify database data should
be considered parallel safe or restricted, since execution of it might
force XID acquisition. We found several other examples of this mistake.
Furthermore, functions that execute user-supplied SQL queries or query
fragments, or pull data from user-supplied cursors, had better be marked
both volatile and parallel unsafe, because we don't know what the supplied
query or cursor might try to do. There were several tsquery and XML
functions that had the wrong proparallel marking for this, and some of
them were even mislabeled as to volatility.
All these bugs are old, dating back to 9.6 for the proparallel mistakes
and much further for the provolatile mistakes. We can't force a
catversion bump in the back branches, but we can at least ensure that
installations initdb'd in future have the right values.
Thomas Munro and Tom Lane
Discussion: https://postgr.es/m/CAEepm=2sNDScSLTfyMYu32Q=ob98ZGW-vM_2oLxinzSABGQ6VA@mail.gmail.com
In the previous coding, skipped pages were mostly zeroes, but they still
had valid WAL page headers. That makes them very much less compressible
than an unbroken string of zeroes would be --- about 10X worse for bzip2
compression, for instance. We don't need those headers, so tweak the logic
so that we zero them out.
Chapman Flack, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/579297F8.7020107@anastigmatix.net
When SSI was developed, slru.c was limited to segment files with names in
the range 0000-FFFF. This didn't allow enough space for predicate.c to
store every possible XID when spilling old transactions to disk, so it
would wrap around sooner and print warnings. Since commits 638cf09e and
73c986ad increased the number of segment files slru.c could manage, that
behavior is unnecessary. Therefore remove that code.
Also remove the macro OldSerXidSegment, which has been unused since
4cd3fb6e.
Thomas Munro, reviewed by Anastasia Lubennikova
Discussion: https://postgr.es/m/CAEepm=3XfsTSxgEbEOmxu0QDiXy0o18NUg2nC89JZcCGE+XFPA@mail.gmail.com
Add the target context's name to the errdetail field of "out of memory"
errors in mcxt.c. Per discussion, this seems likely to be useful to
help narrow down the cause of a reported failure, and it costs little.
Also, now that context names are required to be compile-time constants
in all cases, there's little reason to be concerned about security
issues from exposing these names to users. (Because of such concerns,
we are *not* including the context "ident" field.)
In passing, add unlikely() markers to the allocation-failed tests,
just to be sure the compiler is on the right page about that.
Also, in palloc and friends, copy CurrentMemoryContext into a local
variable, as that's almost surely cheaper to reference than a global.
Discussion: https://postgr.es/m/1099.1522285628@sss.pgh.pa.us
In btree and SP-GiST indexes, move the responsibility for calling
IndexFreeSpaceMapVacuum from the vacuumcleanup phase to the bulkdelete
phase, and do it if and only if we found some pages that could be put into
FSM. As in commit 851a26e26, the idea is to make free pages visible to FSM
searchers sooner when vacuuming very large tables (large enough to need
multiple bulkdelete scans). This adds more redundant work than that commit
did, since we have to scan the entire index FSM each time rather than being
able to localize what needs to be updated; but it still seems worthwhile.
However, we can buy something back by not touching the FSM at all when
there are no pages that can be put in it. That will result in slower
recovery from corrupt upper FSM pages in such a scenario, but it doesn't
seem like that's a case we need to optimize for.
Hash indexes don't use FSM at all. GIN, GiST, and bloom indexes update
FSM during the vacuumcleanup phase not bulkdelete, so that doing something
comparable to this would be a much more invasive change, and it's not clear
it's worth it. BRIN indexes do things sufficiently differently that this
change doesn't apply to them, either.
Claudio Freire, reviewed by Masahiko Sawada and Jing Wang, some additional
tweaks by me
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
Unlike the previous coding, this might result in a Gather per Append
subplan when the target list is parallel-restricted, but such a plan
is probably worth considering in that case, since a single Gather
on top of the entire Append is impossible.
Per Andres Freund and the buildfarm.
Discussion: http://postgr.es/m/20180330050351.bmxx4cdtz67czjda@alap3.anarazel.de
Predicate locks are used on per page basis only if fastupdate = off, in
opposite case predicate lock on pending list will effectively lock whole index,
to reduce locking overhead, just lock a relation. Entry and posting trees are
essentially B-tree, so locks are acquired on leaf pages only.
Author: Shubham Barai with some editorization by me and Dmitry Ivanov
Review by: Alexander Korotkov, Dmitry Ivanov, Fedor Sigaev
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPt5sWW+EwTaKUGFL5_XFcZ0MuGBcyJ70oqbWqr42YKR8Q@mail.gmail.com
If the toplevel scan/join target list is parallel-safe, postpone
generating Gather (or Gather Merge) paths until after the toplevel has
been adjusted to return it. This (correctly) makes queries with
expensive functions in the target list more likely to choose a
parallel plan, since the cost of the plan now reflects the fact that
the evaluation will happen in the workers rather than the leader.
The original complaint about this problem was from Jeff Janes.
If the toplevel scan/join relation is partitioned, recursively apply
the changes to all partitions. This sometimes allows us to get rid of
Result nodes, because Append is not projection-capable but its
children may be. It also cleans up what appears to be incorrect SRF
handling from commit e2f1eb0ee3: the old
code had no knowledge of SRFs for child scan/join rels.
Because we now use create_projection_path() in some cases where we
formerly used apply_projection_to_path(), this changes the ordering
of columns in some queries generated by postgres_fdw. Update
regression outputs accordingly.
Patch by me, reviewed by Amit Kapila and by Ashutosh Bapat. Other
fixes for this problem (substantially different from this version)
were reviewed by Dilip Kumar, Amit Khandekar, and Marina Polyakova.
Discussion: http://postgr.es/m/CAMkU=1ycXNipvhWuweUVpKuyu6SpNjF=yHWu4c4US5JgVGxtZQ@mail.gmail.com
Don't call generate_gather_paths for the topmost scan/join relation
when it is initially populated with paths. Instead, do the work in
grouping_planner. By itself, this gains nothing; in fact it loses
slightly because we end up calling set_cheapest() for the topmost
scan/join rel twice rather than once. However, it paves the way for
a future commit which will postpone generate_gather_paths for the
topmost scan/join relation even further, allowing more accurate
costing of parallel paths.
Amit Kapila and Robert Haas. Earlier versions of this patch (which
different substantially) were reviewed by Dilip Kumar, Amit
Khandekar, Marina Polyakova, and Ashutosh Bapat.
We sometimes insert a ProjectionPath into a plan tree when projection
is not strictly required. The existing code already arranges to avoid
emitting a Result node when the ProjectionPath's subpath can perform
the projection itself, but previously it didn't consider the
possibility that the parent node might not actually require the
projection to be performed at all.
Skipping projection when it's not required can not only avoid Result
nodes that aren't needed, but also avoid losing the "physical tlist"
optimization unneccessarily.
Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoakT5gmahbPWGqrR2nAdFOMAOnOXYoWHRdVfGWs34t6_A@mail.gmail.com
Just noticed that these were quite redundant, since we're holding the
page address in a local variable anyway, and we have pin on the buffer
throughout.
Also improve a comment.
FreeSpaceMapVacuumRange has the same effect, is more efficient if many
pages are involved, and makes fewer assumptions about how it's used.
Notably, Claudio Freire pointed out that UpdateFreeSpaceMap could fail
if the specified freespace value isn't the maximum possible. This isn't
a problem for the single existing user, but the function represents an
attractive nuisance IMO, because it's named as though it were a
general-purpose update function and its limitations are undocumented.
In any case we don't need multiple ways to get the same result.
In passing, do some code review and cleanup in RelationAddExtraBlocks.
In particular, I see no excuse for it to omit the PageIsNew safety check
that's done in the mainline extension path in RelationGetBufferForTuple.
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
VACUUM updates leaf-level FSM entries immediately after cleaning the
corresponding heap blocks. fsmpage.c updates the intra-page search trees
on the leaf-level FSM pages when this happens, but it does not touch the
upper-level FSM pages, so that the released space might not actually be
findable by searchers. Previously, updating the upper-level pages happened
only at the conclusion of the VACUUM run, in a single FreeSpaceMapVacuum()
call. This is bad because the VACUUM might get canceled before ever
reaching that point, so that from the point of view of searchers no space
has been freed at all, leading to table bloat.
We can improve matters by updating the upper pages immediately after each
cycle of index-cleaning and heap-cleaning, processing just the FSM pages
corresponding to the range of heap blocks we have now fully cleaned.
This adds a small amount of extra work, since the FSM pages leading down
to each range boundary will be touched twice, but it's pretty negligible
compared to everything else going on in a large VACUUM.
If there are no indexes, VACUUM doesn't work in cycles but just cleans
each heap page on first visit. In that case we just arbitrarily update
upper FSM pages after each 8GB of heap. That maintains the goal of not
letting all this work slide until the very end, and it doesn't seem worth
expending extra complexity on a case that so seldom occurs in practice.
In either case, the FSM is fully up to date before any attempt is made
to truncate the relation, so that the most likely scenario for VACUUM
cancellation no longer results in out-of-date upper FSM pages. When
we do successfully truncate, adjusting the FSM to reflect that is now
fully handled within FreeSpaceMapTruncateRel.
Claudio Freire, reviewed by Masahiko Sawada and Jing Wang, some additional
tweaks by me
Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com
Add explicit cast from scalar jsonb to all numeric and bool types. It would be
better to have cast from scalar jsonb to text too but there is already a cast
from jsonb to text as just text representation of json. There is no way to have
two different casts for the same type's pair.
Bump catalog version
Author: Anastasia Lubennikova with editorization by Nikita Glukhov and me
Review by: Aleksander Alekseev, Nikita Glukhov, Darafei Praliaskouski
Discussion: https://www.postgresql.org/message-id/flat/0154d35a-24ae-f063-5273-9ffcdf1c7f2e@postgrespro.ru
Previously, committing or aborting inside a cursor loop was prohibited
because that would close and remove the cursor. To allow that,
automatically convert such cursors to holdable cursors so they survive
commits or rollbacks. Portals now have a new state "auto-held", which
means they have been converted automatically from pinned. An auto-held
portal is kept on transaction commit or rollback, but is still removed
when returning to the main loop on error.
This supports all languages that have cursor loop constructs: PL/pgSQL,
PL/Python, PL/Perl.
Reviewed-by: Ildus Kurbangaliev <i.kurbangaliev@postgrespro.ru>
As promised in earlier commits, this adds documentation about the new
build options, the new GUCs, about the planner logic when JIT is used,
and the benefits of JIT in general.
Also adds a more implementation oriented README.
I'm sure we're going to want to expand this further, but I think this
is a reasonable start.
Author: Andres Freund, with contributions by Thomas Munro
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This just shows a few details about JITing, e.g. how many functions
have been JITed, and how long that took. To avoid noise in regression
tests with functions sometimes being JITed in --with-llvm builds,
disable display when COSTS OFF is specified.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This provides infrastructure to allow JITed code to inline code
implemented in C. This e.g. can be postgres internal functions or
extension code.
This already speeds up long running queries, by allowing the LLVM
optimizer to optimize across function boundaries. The optimization
potential currently doesn't reach its full potential because LLVM
cannot optimize the FunctionCallInfoData argument fully away, because
it's allocated on the heap rather than the stack. Fixing that is
beyond what's realistic for v11.
To be able to do that, use CLANG to convert C code to LLVM bitcode,
and have LLVM build a summary for it. That bitcode can then be used to
to inline functions at runtime. For that the bitcode needs to be
installed. Postgres bitcode goes into $pkglibdir/bitcode/postgres,
extensions go into equivalent directories. PGXS has been modified so
that happens automatically if postgres has been compiled with LLVM
support.
Currently this isn't the fastest inline implementation, modules are
reloaded from disk during inlining. That's to work around an apparent
LLVM bug, triggering an apparently spurious error in LLVM assertion
enabled builds. Once that is resolved we can remove the superfluous
read from disk.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
When compiling with clang glibc's definition of isinf() ends up
leading to and external libc function call. That's because there was a
bug in the builtin in an old gcc version, and clang claims
compatibility with an older version. That causes clang to be
measurably slower for floating point heavy workloads than gcc.
To fix simply redirect isinf when using clang and clang confirms it
has __builtin_isinf().
The target cluster that was rewound needs to perform recovery from
the checkpoint created at failover, which leads it to remove or recreate
some files and directories that may have been copied from the source
cluster. So pg_rewind can skip synchronizing such files and directories,
and which reduces the amount of data transferred during a rewind
without changing the usefulness of the operation.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova, Stephen Frost and me
Discussion: https://postgr.es/m/20180205071022.GA17337@paquier.xyz
After processing the filemap to build the list of chunks that will be
fetched from the source to rewing the target server, it is possible that
a file which was previously processed is removed from the source. A
simple example of such an occurence is a WAL segment which gets recycled
on the target in-between. When the filemap is processed, files not
categorized as relation files are first truncated to prepare for its
full copy of which is going to be taken from the source, divided into a
set of junks. However, for a recycled WAL segment, this would result in
a segment which has a zero-byte size. With such an empty file,
post-rewind recovery thinks that records are saved but they are actually
not because of the truncation which happened when processing the
filemap, resulting in data loss.
In order to fix the problem, make sure that files which are found as
removed on the source when receiving chunks of them are as well deleted
on the target server for consistency.
Back-patch to 9.5 where pg_rewind was added.
Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier
Reported-by: Tsunakawa Takayuki
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8DAAA2%40G01JPEXMBYT05
So far, a nested CALL or DO in PL/pgSQL would not establish a context
where transaction control statements were allowed. This fixes that by
handling CALL and DO specially in PL/pgSQL, passing the atomic/nonatomic
execution context through and doing the required management around
transaction boundaries.
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
tuplesort_gettupleslot() passed back tuples allocated in the tuplesort's
own memory context, even when the caller was responsible to free them.
This created a double-free hazard, because some callers might destroy
the tuplesort object (via tuplesort_end) before trying to clean up the
last returned tuple. To avoid this, change the API to specify that the
tuple is allocated in the caller's memory context. v10 and HEAD already
did things that way, but in 9.5 and 9.6 this is a live bug that can
demonstrably cause crashes with some grouping-set usages.
In 9.5 and 9.6, this requires doing an extra tuple copy in some cases,
which is unfortunate. But the amount of refactoring needed to avoid it
seems excessive for a back-patched change, especially since the cases
where an extra copy happens are less performance-critical.
Likewise change tuplesort_getdatum() to return pass-by-reference Datums
in the caller's context not the tuplesort's context. There seem to be
no live bugs among its callers, but clearly the same sort of situation
could happen in future.
For other tuplesort fetch routines, continue to allocate the memory in
the tuplesort's context. This is a little inconsistent with what we now
do for tuplesort_gettupleslot() and tuplesort_getdatum(), but that's
preferable to adding new copy overhead in the back branches where it's
clearly unnecessary. These other fetch routines provide the weakest
possible guarantees about tuple memory lifespan from v10 on, anyway,
so this actually seems more consistent overall.
Adjust relevant comments to reflect these API redefinitions.
Arguably, we should change the pre-9.5 branches as well, but since
there are no known failure cases there, it seems not worth the risk.
Peter Geoghegan, per report from Bernd Helmle. Reviewed by Kyotaro
Horiguchi; thanks also to Andreas Seltenreich for extracting a
self-contained test case.
Discussion: https://postgr.es/m/1512661638.9720.34.camel@oopsware.de
Store GID of 2PC in commit/abort WAL records when wal_level = logical.
This allows logical decoding to send the SAME gid to subscribers
across restarts of logical replication.
Track relica origin replay progress for 2PC.
(Edited from patch 0003 in the logical decoding 2PC series.)
Authors: Nikhil Sontakke, Stas Kelvich
Reviewed-by: Simon Riggs, Andres Freund
Resolve build farm failures from c203d6cf81,
diagnosed by Tom Lane.
The output of pg_stat_get_xact_tuples_hot_updated() and friends
is not guaranteed to show anything after the transaction completes.
Data is flushed slowly to stats collector, so using them can
give timing issues.
Instead using memset to set tts_isnull, call the new
slot_getmissingattrs().
Also fix a bug (= instead of >=) in the code generation. Normally = is
correct, but when repeatedly deforming fields not in a
tuple (e.g. deform up to natts + 1 and then natts + 2) >= is needed.
Discussion: https://postgr.es/m/20180328010053.i2qvsuuusst4lgmc@alap3.anarazel.de
Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.
Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.
The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g. catalog relations) NULL can be passed for this
argument.
Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.
Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com
It seems that all buildfarm members are now using the <stdbool.h> code
path, so that none of them report "bool" as a typedef. We still need it
to be treated that way, so adjust pgindent to force that whether or not
it's in the given list.
Also, the recent introduction of LLVM infrastructure has caused the
appearance of some typedef names that we definitely *don't* want
treated as typedefs, such as "string" and "abs". Extend the existing
blacklist to include these. (Additions based on comparing v10's
typedefs list to what the buildfarm is currently emitting.)
Rearrange the code so that the lists of whitelisted/blacklisted
names are a bit easier to find and modify.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/28690.1521912334@sss.pgh.pa.us
Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b1 rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident". The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to. The "ident" string, if
wanted, is supplied later. This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.
The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there. And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.
All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead. This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other. Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.
I also arranged for plancache contexts to use the query source string
as their identifier. This is basically free for CachedPlanSources, as
they contained a copy of that string already. We pay an extra pstrdup
to do it for CachedPlans. That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first). I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.
This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format. This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.
The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b1. Seems
better for extension authors to endure just one round of API changes
not two.
Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com
If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.
Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.
Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.
Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup
Previously, PQhost didn't return the connected host details when the
connection type was CHT_HOST_ADDRESS (i.e., via hostaddr). Instead, it
returned the complete host connection parameter (which could contain
multiple hosts) or the default host details, which was confusing and
arguably incorrect.
Change this to return the actually connected host or hostaddr
irrespective of the connection type. When hostaddr but no host was
specified, hostaddr is now returned. Never return the original host
connection parameter, and document that PQhost cannot be relied on
before the connection is established.
PQport is similarly changed to always return the active connection port
and never the original connection parameter.
Author: Hari Babu <kommi.haribabu@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Add page-level predicate locking, due to gist's code organization, patch seems
close to trivial: add check before page changing, add predicate lock before page
scanning. Although choosing right place to check is not simple: it should not
be called during index build, it should support insertion of new downlink and so
on.
Author: Shubham Barai with editorization by me and Alexander Korotkov
Reviewed by: Alexander Korotkov, Andrey Borodin, me
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPtdcANpw5ePU3LvnTP8HCENFw6wygupQAyNBgD-sG3h0g@mail.gmail.com
This is mostly done to be able to validate features and fixes
submitted to LLVM. Given the size of these changes that seems
acceptable.
Author: Andres Freund
Due to the differing APIs between versions, I forgot to deallocate the
generated module in older LLVM versions, leading to a memory leak.
Author: Andres Freund
Performing JIT compilation for deforming gains performance benefits
over unJITed deforming from compile-time knowledge of the tuple
descriptor. Fixed column widths, NOT NULLness, etc can be taken
advantage of.
Right now the JITed deforming is only used when deforming tuples as
part of expression evaluation (and obviously only if the descriptor is
known). It's likely to be beneficial in other cases, too.
By default tuple deforming is JITed whenever an expression is JIT
compiled. There's a separate boolean GUC controlling it, but that's
expected to be primarily useful for development and benchmarking.
Docs will follow in a later commit containing docs for the whole JIT
feature.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Setting random could increase reproducibility of test in some cases. Patch
suggests three providers for seed: time (default), strong random
generator (if available) and unsigned constant. Seed could be set from
command line or enviroment variable.
Author: Fabien Coelho
Reviewed by: Chapman Flack
Discussion: https://www.postgresql.org/message-id/flat/20160407082711.q7iq3ykffqxcszkv@alap3.anarazel.de
The listed numbers disagreed with the ones being used in the symbols;
but instead of just fixing the numbers in the comment, use the symbolic
name instead, which seems clearer.
This has been wrong all along, so apply back to 9.5 where BRIN was
introduced.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/5ff514f2-8b1e-6366-b11c-8e2ed442562d@2ndquadrant.com
Test 'triggers' fails when another one creates triggers concurrently at
some precise time, because of a missing WHERE clause.
Per buildfarm members snapper, desmoxytes.
Commit eb7ed3f306 enabled unique constraints on partitioned tables,
but one thing that was not working properly is INSERT/ON CONFLICT.
This commit introduces a new node keeps state related to the ON CONFLICT
clause per partition, and fills it when that partition is about to be
used for tuple routing.
Author: Amit Langote, Álvaro Herrera
Reviewed-by: Etsuro Fujita, Pavan Deolasee
Discussion: https://postgr.es/m/20180228004602.cwdyralmg5ejdqkq@alvherre.pgsql
Remember the last page of an index insert if it's the rightmost leaf
page. If the next entry belongs on and can fit in the remembered page,
insert the new entry there as long as we can get a lock on the page.
Otherwise, fall back on the more expensive method of searching for
the right place to insert the entry.
This provides a performance improvement for the common case where an
index entry is for monotonically increasing or nearly monotonically
increasing value such as an identity field or a current timestamp.
Pavan Deolasee
Reviewed by Claudio Freire, Simon Riggs and Peter Geoghegan
Discussion: https://postgr.es/m/CABOikdM9DrupjyKZZFM5k8-0RCDs1wk6JzEkg7UgSW6QzOwMZw@mail.gmail.com
Commit 8694cc96b did this randomly differently from other callers of
parse_filename_for_nontemp_relation(). Perhaps unsurprisingly,
the randomly different way is wrong; it fails to ensure the
extracted string is null-terminated. Per buildfarm member skink.
Discussion: https://postgr.es/m/14453.1522001792@sss.pgh.pa.us
This adds a new option --wal-segsize (analogous to initdb) that changes
the WAL segment size in pg_control.
Author: Nathan Bossart <bossartn@amazon.com>
Coverity complained that this check is pointless, and it's right.
There is no case where we'd call ExecutorStart with a null plannedstmt,
and if we did, it'd have crashed before here. Thinko in commit cc415a56d.
If random() returns a result sufficiently close to zero, float8out
switches to scientific notation, breaking this test case's expectation
that the output should look like '0.xxxxxxxxx'. Casting to numeric
should fix that. Per buildfarm member pogona.
Discussion: https://postgr.es/m/20180324212502.wt4serghfidge2on@alap3.anarazel.de
We were running out of good single-letter options for some upcoming
pg_resetwal functionality, so add long options to create more
possibilities. Add to pg_controldata as well for symmetry.
based on patch by Bossart, Nathan <bossartn@amazon.com>
In the case that PostgreSQL uses stdbool.h but Perl doesn't, we need to
prevent Perl from defining bool, to prevent compiler warnings about
redefinition.
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
Revert the PL/Perl-specific change in
9a95a77d9d. We must not prevent Perl from
using stdbool.h when it has been built to do so, even if it uses an
incompatible size. Otherwise, we would be imposing our bool on Perl,
which will lead to crashes because of the size mismatch.
Instead, we undef bool after including the Perl headers, as we did
previously, but now only if we are not using stdbool.h ourselves.
Record that choice in c.h as USE_STDBOOL. This will also make it easier
to apply that coding pattern elsewhere if necessary.
Previously, FOR EACH ROW triggers were not allowed in partitioned
tables. Now we allow AFTER triggers on them, and on trigger creation we
cascade to create an identical trigger in each partition. We also clone
the triggers to each partition that is created or attached later.
This means that deferred unique keys are allowed on partitioned tables,
too.
Author: Álvaro Herrera
Reviewed-by: Peter Eisentraut, Simon Riggs, Amit Langote, Robert Haas,
Thomas Munro
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
The LLVM JIT provider uses clang to synchronize types between normal C
code and runtime generated code. Clang represents stdbool.h style
booleans in return values & parameters differently from booleans
stored in variables.
Thus the expression compilation code from 2a0faed9d needs to be
adapted to 9a95a77d9. Instead of hardcoding i8 as the type for
booleans (which already was wrong on some edge case platforms!), use
postgres' notion of a boolean as used for storage and for parameters.
Per buildfarm animal xenodermus.
Author: Andres Freund
Using the standard bool type provided by C allows some recent compilers
and debuggers to give better diagnostics. Also, some extension code and
third-party headers are increasingly pulling in stdbool.h, so it's
probably saner if everyone uses the same definition.
But PostgreSQL code is not prepared to handle bool of a size other than
1, so we keep our own old definition if we encounter a stdbool.h with a
bool of a different size. (Among current build farm members, this only
applies to old macOS versions on PowerPC.)
To check that the used bool is of the right size, add a static
assertions about size of GinTernaryValue vs bool. This is currently the
only place that assumes that bool and char are of the same size.
Discussion: https://www.postgresql.org/message-id/flat/3a0fe7e1-5ed1-414b-9230-53bbc0ed1f49@2ndquadrant.com
In addition to the interpretation of expressions (which back
evaluation of WHERE clauses, target list projection, aggregates
transition values etc) support compiling expressions to native code,
using the infrastructure added in earlier commits.
To avoid duplicating a lot of code, only support emitting code for
cases that are likely to be performance critical. For expression steps
that aren't deemed that, use the existing interpreter.
The generated code isn't great - some architectural changes are
required to address that. But this already yields a significant
speedup for some analytics queries, particularly with WHERE clauses
filtering a lot, or computing multiple aggregates.
Author: Andres Freund
Tested-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Disable JITing for VALUES() nodes.
VALUES() nodes are only ever executed once. This is primarily helpful
for debugging, when forcing JITing even for cheap queries.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
For any interesting JIT target, fields inside structs need to be
accessed. b96d550e contains infrastructure for syncing the definition
of types between postgres C code and runtime code generation with
LLVM. But that doesn't sync the number or names of fields inside
structs, just the types (including padding etc).
One option would be to hardcode the offset numbers in the JIT code,
but that'd be hard to keep in sync. Instead add macros indicating the
field offset to the fields that need to be accessed. Not pretty, but
manageable.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
Without this patch, we can implement a UNION or UNION ALL as an
Append where Gather appears beneath one or more of the Append
branches, but this lets us put the Gather node on top, with
a partial path for each relation underneath.
There is considerably more work that could be done to improve
planning in this area, but that will probably need to wait
for a future release.
Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar
Raghuwanshi.
Discussion: http://postgr.es/m/CA+TgmoaLRAOqHmMZx=ESM3VDEPceg+-XXZsRXQ8GtFJO_zbMSw@mail.gmail.com
VACUUM thought that reltuples represents the total number of tuples in
the relation, while ANALYZE counted only live tuples. This can cause
"flapping" in the value when background vacuums and analyzes happen
separately. The planner's use of reltuples essentially assumes that
it's the count of live (visible) tuples, so let's standardize on having
it mean live tuples.
Another issue is that the definition of "live tuple" isn't totally clear;
what should be done with INSERT_IN_PROGRESS or DELETE_IN_PROGRESS tuples?
ANALYZE's choices in this regard are made on the assumption that if the
originating transaction commits at all, it will happen after ANALYZE
finishes, so we should ignore the effects of the in-progress transaction
--- unless it is our own transaction, and then we should count it.
Let's propagate this definition into VACUUM, too.
Likewise propagate this definition into CREATE INDEX, and into
contrib/pgstattuple's pgstattuple_approx() function.
Tomas Vondra, reviewed by Haribabu Kommi, some corrections by me
Discussion: https://postgr.es/m/16db4468-edfa-830a-f921-39a50498e77e@2ndquadrant.com
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This commit introduces the ability to actually generate code using
LLVM. In particular, this adds:
- Ability to emit code both in heavily optimized and largely
unoptimized fashion
- Batching facility to allow functions to be defined in small
increments, but optimized and emitted in executable form in larger
batches (for performance and memory efficiency)
- Type and function declaration synchronization between runtime
generated code and normal postgres code. This is critical to be able
to access struct fields etc.
- Developer oriented jit_dump_bitcode GUC, for inspecting / debugging
the generated code.
- per JitContext statistics of number of functions, time spent
generating code, optimizing, and emitting it. This will later be
employed for EXPLAIN support.
This commit doesn't yet contain any code actually generating
functions. That'll follow in later commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with contributions by Pierre Ducroquet
Testing-By: Thomas Munro, Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Count the number of tuples in the index honestly, instead of assuming
that it's the same as the number of tuples in the heap. (It might be
different if the index is partial.)
Back-patch to all supported versions.
Tomas Vondra
Discussion: https://postgr.es/m/3b3d8eac-c709-0d25-088e-b98339a1b28a@2ndquadrant.com
If the partition keys of input relation are part of the GROUP BY
clause, all the rows belonging to a given group come from a single
partition. This allows aggregation/grouping over a partitioned
relation to be broken down * into aggregation/grouping on each
partition. This should be no worse, and often better, than the normal
approach.
If the GROUP BY clause does not contain all the partition keys, we can
still perform partial aggregation for each partition and then finalize
aggregation after appending the partial results. This is less certain
to be a win, but it's still useful.
Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series
of which this patch is a part was also reviewed and tested by Antonin
Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin
Knizhnik, Pascal Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
Previously, a value was included in the MCV list if its frequency was
25% larger than the estimated average frequency of all nonnull values
in the table. For uniform distributions, that can lead to values
being included in the MCV list and significantly overestimated on the
basis of relatively few (sometimes just 2) instances being seen in the
sample. For non-uniform distributions, it can lead to too few values
being included in the MCV list, since the overall average frequency
may be dominated by a small number of very common values, while the
remaining values may still have a large spread of frequencies, causing
both substantial overestimation and underestimation of the remaining
values. Furthermore, increasing the statistics target may have little
effect because the overall average frequency will remain relatively
unchanged.
Instead, populate the MCV list with the largest set of common values
that are statistically significantly more common than the average
frequency of the remaining values. This takes into account the
variance of the sample counts, which depends on the counts themselves
and on the proportion of the table that was sampled. As a result, it
constrains the relative standard error of estimates based on the
frequencies of values in the list, reducing the chances of too many
values being included. At the same time, it allows more values to be
included, since the MCVs need only be more common than the remaining
non-MCVs, rather than the overall average. Thus it tends to produce
fewer MCVs than the previous code for uniform distributions, and more
for non-uniform distributions, reducing estimation errors in both
cases. In addition, the algorithm responds better to increasing the
statistics target, allowing more values to be included in the MCV list
when more of the table is sampled.
Jeff Janes, substantially modified by me. Reviewed by John Naylor and
Tomas Vondra.
Discussion: https://postgr.es/m/CAMkU=1yvdGvW9TmiLAhz2erFnvnPFYHbOZuO+a=4DVkzpuQ2tw@mail.gmail.com
This commit introduces:
1) JIT provider abstraction, which allows JIT functionality to be
implemented in separate shared libraries. That's desirable because
it allows to install JIT support as a separate package, and because
it allows experimentation with different forms of JITing.
2) JITContexts which can be, using functions introduced in follow up
commits, used to emit JITed functions, and have them be cleaned up
on error.
3) The outline of a LLVM JIT provider, which will be fleshed out in
subsequent commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with architectural input from Jeff Davis
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Pending some solution for the problems noted in commit 742869946,
disallow dynamic creation of GUC_LIST_QUOTE variables.
If there are any extensions out there using this feature, they'd not
be happy for us to start enforcing this rule in minor releases, so
this is a HEAD-only change. The previous commit didn't make things
any worse than they already were for such cases.
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Discussion: https://postgr.es/m/20180111064900.GA51030@paquier.xyz
Currently, if operator_predicate_proof() is given an operator clause like
"something op NULL", it just throws up its hands and reports it can't prove
anything. But we can often do better than that, if the operator is strict,
because then we know that the clause returns NULL overall. Depending on
whether we're trying to prove or refute something, and whether we need
weak or strong semantics for NULL, this may be enough to prove the
implication, especially when we rely on the standard rule that "false
implies anything". In particular, this lets us do something useful with
questions like "does X IN (1,3,5,NULL) imply X <= 5?" The null entry
in the IN list can effectively be ignored for this purpose, but the
proof rules were not previously smart enough to deduce that.
This patch is by me, but it owes something to previous work by
Amit Langote to try to solve problems of the form mentioned.
Thanks also to Emre Hasegeli and Ashutosh Bapat for review.
Discussion: https://postgr.es/m/3bad48fc-f257-c445-feeb-8a2b2fb622ba@lab.ntt.co.jp
I noticed while fooling with John Naylor's bootstrap-data patch that we had
one high-numbered manually assigned OID, 8888, which evidently came from a
submission that the committer didn't bother to bring into line with usual
OID allocation practices before committing. That's a bad idea, because it
creates a hazard for other patches that may be temporarily using high OID
numbers. Change it to something more in line with what we usually do.
This evidently dates to commit abb173392. It's too late to change it
in released branches, but we can fix it in HEAD.
If the control file is corrupted and specifies the WAL segment size
to be 0 bytes, calculating the latest checkpoint's REDO WAL file
will fail with a division-by-zero error. Show it as "???" instead.
Also reword the warning message a bit and send it to stdout, like the
other pre-existing warning messages.
Add some tests for dealing with a corrupted pg_control file.
Author: Nathan Bossart <bossartn@amazon.com>, tests by me
My commit 4dba331cb3 that moved around CommandCounterIncrement calls
in partitioning DDL code unearthed a problem with the relcache handling
for the 'default' partition: the construction of a correct relcache
entry for the partitioned table was at the mercy of lack of CCI calls in
non-trivial amounts of code. This was prone to creating problems later
on, as the code develops. This was visible as a test failure in a
compile with RELCACHE_FORCE_RELASE (buildfarm member prion).
The problem is that after the mentioned commit it was possible to create
a relcache entry that had incomplete information regarding the default
partition because I introduced a CCI between adding the catalog entries
for the default partition (StorePartitionBound) and the update of
pg_partitioned_table entry for its parent partitioned table
(update_default_partition_oid). It seems the best fix is to move the
latter so that it occurs inside the former; the purposeful lack of
intervening CCI should be more obvious, and harder to break.
I also remove a check in RelationBuildPartitionDesc that returns NULL if
the key is not set. I couldn't find any place that needs this hack
anymore; probably it was required because of bugs that have since been
fixed.
Fix a few typos I noticed while reviewing the code involved.
Discussion: https://postgr.es/m/20180320182659.nyzn3vqtjbbtfgwq@alvherre.pgsql
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2b, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Reviewed-by: Craig Ringer <craig@2ndquadrant.com>
If there were multiple grouping sets, none of them empty, all of which
were unsortable, then an oversight in consider_groupingsets_paths led
to a null pointer dereference. Fix, and add a regression test for this
case.
Per report from Dang Minh Huong, though I didn't use their patch.
Backpatch to 10.x where hashed grouping sets were added.
LLVM will be used for *optional* Just-in-time compilation
support. This commit just adds the configure infrastructure that
detects LLVM.
No documentation has been added for the --with-llvm flag, that'll be
added after the actual supporting code has been added.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This is an optional dependency. It'll be used for the upcoming LLVM
based just in time compilation support, which needs to wrap a few LLVM
C++ APIs so they're accessible from C..
For now test for C++ compilers unconditionally, without failing if not
present, to ensure wide buildfarm coverage. If we're bothered by the
additional test times (which are quite short) or verbosity, we can
later make the tests conditional on --with-llvm.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Since e3bdb2d926, libpq failed to build on
some platforms because they did not have SSL_clear_options(). Although
mainline OpenSSL introduced SSL_clear_options() after
SSL_OP_NO_COMPRESSION, so the code should have built fine, at least an
old NetBSD version (build farm "coypu" NetBSD 5.1 gcc 4.1.3 PR-20080704
powerpc) has SSL_OP_NO_COMPRESSION but no SSL_clear_options().
So add a configure check for SSL_clear_options(). If we don't find it,
skip the call. That means on such a platform one cannot *enable* SSL
compression if the built-in default is off, but that seems an unlikely
combination anyway and not very interesting in practice.
This avoids unnecessarily creating a RelOptInfo for which we have no
actual need. This idea is from Ashutosh Bapat, who wrote a very
different patch to accomplish a similar goal. It will be more
important if and when we get partition-wise aggregate, since then
there could be many partially grouped relations all of which could
potentially be unnecessary. In passing, this sets the grouping
relation's reltarget, which wasn't done previously but makes things
simpler for this refactoring.
Along the way, adjust things so that add_paths_to_partial_grouping_rel,
now renamed create_partial_grouping_paths, does not perform the Gather
or Gather Merge steps to generate non-partial paths from partial
paths; have the caller do it instead. This is again for the
convenience of partition-wise aggregate, which wants to inject
additional partial paths are created and before we decide which ones
to Gather/Gather Merge. This might seem like a separate change, but
it's actually pretty closely entangled; I couldn't really see much
value in separating it and having to change some things twice.
Patch by me, reviewed by Ashutosh Bapat.
Discussion: http://postgr.es/m/CA+TgmoZ+ZJTVad-=vEq393N99KTooxv9k7M+z73qnTAqkb49BQ@mail.gmail.com
It makes sense to do the CCIs in the places that do catalog updates,
rather than before the places that error out because the former ones
fail to do it. In particular, it looks like StorePartitionBound() and
IndexSetParentIndex() ought to make their own CCIs.
Per review comments from Peter Eisentraut for row-level triggers on
partitioned tables.
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
The original coding of the SP-GiST scan traversalValue feature (commit
ccd6eb49a) arranged for traversal values to be stored in the query's main
executor context. That's fine if there's only one index scan per query,
but if there are many, we have a memory leak as successive scans create
new traversal values. Fix it by creating a separate memory context for
traversal values, which we can reset during spgrescan(). Back-patch
to 9.6 where this code was introduced.
In principle, adding the traversalCxt field to SpGistScanOpaqueData
creates an ABI break in the back branches. But I (tgl) have little
sympathy for extensions including spgist_private.h, so I'm not very
worried about that. Alternatively we could stick the new field at the
end of the struct in back branches, but that has its own downsides.
Anton Dignös, reviewed by Alexander Kuzmenkov
Discussion: https://postgr.es/m/CALNdv1jb6y2Te-m8xHLxLX12RsBmZJ1f4hESX7J0HjgyOhA9eA@mail.gmail.com
refresh_by_match_merge() has some issues in the way it builds a SQL
query to construct the "diff" table:
1. It doesn't require the selected unique index(es) to be indimmediate.
2. It doesn't pay attention to the particular equality semantics enforced
by a given index, but just assumes that they must be those of the column
datatype's default btree opclass.
3. It doesn't check that the indexes are btrees.
4. It's insufficiently careful to ensure that the parser will pick the
intended operator when parsing the query. (This would have been a
security bug before CVE-2018-1058.)
5. It's not careful about indexes on system columns.
The way to fix#4 is to make use of the existing code in ri_triggers.c
for generating an arbitrary binary operator clause. I chose to move
that to ruleutils.c, since that seems a more reasonable place to be
exporting such functionality from than ri_triggers.c.
While #1, #3, and #5 are just latent given existing feature restrictions,
and #2 doesn't arise in the core system for lack of alternate opclasses
with different equality behaviors, #4 seems like an issue worth
back-patching. That's the bulk of the change anyway, so just back-patch
the whole thing to 9.4 where this code was introduced.
Discussion: https://postgr.es/m/13836.1521413227@sss.pgh.pa.us
The new unlogged_reinit recovery tests create a new tablespace using
TestLib.pm's tempdir. However, on msys that function returns a virtual
path that isn't understood by Postgres. Here we add a new function to
TestLib.pm to turn such a path into a real path on the underlying file
system, and use it in the new test to create the tablespace. The new
function is essentially a NOOP everywhere but msys.
Jeff Janes discovered that commit 7ca25b7de made one of the queries run by
REFRESH MATERIALIZED VIEW CONCURRENTLY perform badly. The root cause is
bad cardinality estimation for correlated quals, but a principled solution
to that problem is some way off, especially since the planner lacks any
statistics about whole-row variables. Moreover, in non-error cases this
query produces no rows, meaning it must be run to completion; but use of
LIMIT 1 encourages the planner to pick a fast-start, slow-completion plan,
exactly not what we want. Remove the LIMIT clause, and instead rely on
the count parameter we pass to SPI_execute() to prevent excess work if the
query does return some rows.
While we've heard no field reports of planner misbehavior with this query,
it could be that people are having performance issues that haven't reached
the level of pain needed to cause a bug report. In any case, that LIMIT
clause can't possibly do anything helpful with any existing version of the
planner, and it demonstrably can cause bad choices in some cases, so
back-patch to 9.4 where the code was introduced.
Thomas Munro
Discussion: https://postgr.es/m/CAMkU=1z-JoGymHneGHar1cru4F1XDfHqJDzxP_CtK5cL3DOfmg@mail.gmail.com
These values can be obtained from the ModifyTable node which is already
a part of both the ModifyTableState and ExecInsert.
Author: Álvaro Herrera, Amit Langote
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/20180316151303.rml2p5wffn3o6qy6@alvherre.pgsql
We make some changes to ModifyTableState and the EState it uses whenever
we route tuples to partitions; but we weren't restoring properly in all
cases, possibly causing crashes when partitions with different tuple
descriptors are targeted by tuples inserted in the same command.
Refactor some code, creating ExecPrepareTupleRouting, to encapsulate the
needed state changing logic, and have it invoked one level above its
current place (ie. put it in ExecModifyTable instead of ExecInsert);
this makes it all more readable.
Add a test case to exercise this.
We don't support having views as partitions; and since only views can
have INSTEAD OF triggers, there is no point in testing for INSTEAD OF
when processing insertions into a partitioned table. Remove code that
appears to support this (but which is actually never relevant.)
In passing, fix location of some very confusing comments in
ModifyTableState.
Reported-by: Amit Langote
Author: Etsuro Fujita, Amit Langote
Discussion: https://postgr/es/m/0473bf5c-57b1-f1f7-3d58-455c2230bc5f@lab.ntt.co.jp
Commit 3fc6e2d7f5 made setop planning
stages return paths rather than plans, but all such paths were loosely
associated with a single RelOptInfo, and only the final path was added
to the RelOptInfo. Even at the time, it was foreseen that this should
be changed, because there is otherwise no good way for a single stage
of setop planning to return multiple paths. With this patch, each
stage of set operation planning now creates a separate RelOptInfo;
these are distinguished by using appropriate relid sets. Note that
this patch does nothing whatsoever about actually returning multiple
paths for the same set operation; it just makes it possible for a
future patch to do so.
Along the way, adjust things so that create_upper_paths_hook is called
for each of these new RelOptInfos rather than just once, since that
might be useful to extensions using that hook. It might be a good
to provide an FDW API here as well, but I didn't try to do that for
now.
Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar
Raghuwanshi.
Discussion: http://postgr.es/m/CA+TgmoaLRAOqHmMZx=ESM3VDEPceg+-XXZsRXQ8GtFJO_zbMSw@mail.gmail.com
Also, rename it to plan_union_chidren, so the old name wasn't
very descriptive. This results in a small net reduction in code,
seems at least to me to be easier to understand, and saves
space on the process stack.
Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar
Raghuwanshi.
Discussion: http://postgr.es/m/CA+TgmoaLRAOqHmMZx=ESM3VDEPceg+-XXZsRXQ8GtFJO_zbMSw@mail.gmail.com
In e170b8c8, protection against modified search_path was added. However,
PostgreSQL versions prior to 10 does not accept SQL commands over a
replication connection, so the protection would generate a syntax error.
Since we cannot run SQL commands on it, we are also not vulnerable to
the issue that e170b8c8 fixes, so we can just skip this command for
older versions.
Author: Michael Paquier <michael@paquier.xyz>
The test to exit the loop if the integer control value would overflow
an int32 turns out not to work on some ICC versions, as it's dependent
on the assumption that the compiler will execute the code as written
rather than "optimize" it. ICC lacks any equivalent of gcc's -fwrapv
switch, so it was optimizing on the assumption of no integer overflow,
and that breaks this. Rewrite into a form that in fact does not
do any overflowing computations.
Per Tomas Vondra and buildfarm member fulmar. It's been like this
for a long time, although it was not till we added a regression test
case covering the behavior (in commit dd2243f2a) that the problem
became apparent. Back-patch to all supported versions.
Discussion: https://postgr.es/m/50562fdc-0876-9843-c883-15b8566c7511@2ndquadrant.com
"UPDATE/DELETE WHERE CURRENT OF cursor_name" failed, with an error message
like "cannot extract system attribute from virtual tuple", if the cursor
was using a index-only scan for the target table. Fix it by digging the
current TID out of the indexscan state.
It seems likely that the same failure could occur for CustomScan plans
and perhaps some FDW plan types, so that leaving this to be treated as an
internal error with an obscure message isn't as good an idea as it first
seemed. Hence, add a bit of heaptuple.c infrastructure to let us deliver
a more on-topic message. I chose to make the message match what you get
for the case where execCurrentOf can't identify the target scan node at
all, "cursor "foo" is not a simply updatable scan of table "bar"".
Perhaps it should be different, but we can always adjust that later.
In the future, it might be nice to provide hooks that would let custom
scan providers and/or FDWs deal with this in other ways; but that's
not a suitable topic for a back-patchable bug fix.
It's been like this all along, so back-patch to all supported branches.
Yugo Nagata and Tom Lane
Discussion: https://postgr.es/m/20180201013349.937dfc5f.nagata@sraoss.co.jp
Since SSL compression is no longer recommended, turn the default in
libpq from on to off.
OpenSSL 1.1.0 and many distribution packages already turn compression
off by default, so such a server won't accept compression anyway. So
this will mainly affect users of older OpenSSL installations.
Also update the documentation to make clear that this setting is no
longer recommended.
Discussion: https://www.postgresql.org/message-id/flat/595cf3b1-4ffe-7f05-6f72-f72b7afa7993%402ndquadrant.com
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This allows to deduplicate some existing code, but mainly avoids some
duplication in upcoming commits.
In passing, fix variable names indicating wrong unit (seconds instead
of ms).
Author: Andres Freund
Discussion: https://postgr.es/m/20180314002740.cah3mdsonz5mxney@alap3.anarazel.de
'long' is not useful type across platforms, as it's 32bit on 32 bit
platforms, and even on some 64bit platforms (e.g. windows) it's still
only 32bits wide.
As ExplainPropertyInteger should never be performance critical, change
it to accept a 64bit argument and remove ExplainPropertyLong.
Author: Andres Freund
Discussion: https://postgr.es/m/20180314164832.n56wt7zcbpzi6zxe@alap3.anarazel.de
ExecHashTableCreate allocated some memory that wasn't freed by
ExecHashTableDestroy, specifically the per-hash-key function information.
That's not a huge amount of data, but if one runs a query that repeats
a hash join enough times, it builds up. Fix by arranging for the data
in question to be kept in the hashtable's hashCxt instead of leaving it
"loose" in the query-lifespan executor context. (This ensures that we'll
also clean up anything that the hash functions allocate in fn_mcxt.)
Per report from Amit Khandekar. It's been like this forever, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAJ3gD9cFofAWGvcxLOxDHC=B0hjtW8yGmUsF2hdGh97CM38=7g@mail.gmail.com
In some cases, these were different for no apparent reason, making
debugging unnecessarily mysterious.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Instead of embedding the savepoint name in a list and then requiring
complex code to unpack it, just add another struct field to store it
directly.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Part of the intent in commit fd1a421fe was to allow SQL functions that are
declared to return VOID to contain anything, including an unrelated final
SELECT, the same as SQL-language procedures can. However, the planner's
inlining logic didn't get that memo. Fix it, and add some regression tests
covering this area, since evidently we had none.
In passing, clean up some typos in comments in create_function_3.sql,
and get rid of its none-too-safe assumption that DROP CASCADE notice
output is immutably ordered.
Per report from Prabhat Sahu.
Discussion: https://postgr.es/m/CANEvxPqxAj6nNHVcaXxpTeEFPmh24Whu+23emgjiuKrhJSct0A@mail.gmail.com
