This makes ALTER DATABASE .. SET TABLESPACE and CREATE DATABASE more
sensitive to interrupts. Backpatch to 8.4, where ALTER DATABASE .. SET
TABLESPACE was introduced. We could go back further, but in the absence
of complaints about the CREATE DATABASE case it doesn't seem worth it.
Guillaume Lelarge, with a small correction by me.
but we have nevertheless exposed them to users via pg_get_expr(). It would
be too much maintenance effort to rigorously check the input, so put a hack
in place instead to restrict pg_get_expr() so that the argument must come
from one of the system catalog columns known to contain valid expressions.
Per report from Rushabh Lathia. Backpatch to 7.4 which is the oldest
supported version at the moment.
as well as fseeko, and to not assume that fseeko(fp, 0, SEEK_CUR) proves
anything. Also improve some related comments. Per my observation that
the SEEK_CUR test didn't actually work on some platforms, and subsequent
discussion with Robert Haas.
Back-patch to 8.4. In earlier releases it's not that important whether
we get the hasSeek test right, but with parallel restore it matters.
contain data offsets (which it won't, if pg_dump thought its output wasn't
seekable). To do that, remove an unnecessarily aggressive error check, and
instead fail if we get to the end of the archive without finding the desired
data item. Also improve the error message to be more specific about the
cause of the problem. Per discussion of recent report from Igor Neyman.
Back-patch to 8.4 where parallel restore was introduced.
of YYSTYPE, and hence returning the wrong answer for cases where a plpgsql
"unreserved keyword" really does conflict with a variable name. Obviously
I didn't test this enough :-(. Per bug #5524 from Peter Gagarinov.
This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0. The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.
The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.
Tollef Fog Heen, Fujii Masao, and me.
In HEAD, emit a warning when an operator named => is defined.
In both HEAD and the backbranches (except in 8.2, where contrib
modules do not have documentation), document that hstore's text =>
text operator may be removed in a future release, and encourage the
use of the hstore(text, text) function instead. This function only
exists in HEAD (previously, it was called tconvert), so backpatch
it back to 8.2, when hstore was added. Per discussion.
might close the cursor, rendering the Portal pointer to it invalid.
Closing the cursor in the middle of the loop is not a very sensible thing
to do, but we must handle it gracefully and throw an error instead of
crashing.
If such a Var appeared within a nested sub-select, we failed to translate it
correctly during pullup of the view, because the recursive call to
replace_rte_variables_mutator was looking for the wrong sublevels_up value.
Bug was introduced during the addition of the PlaceHolderVar mechanism.
Per bug #5514 from Marcos Castedo.
master. Otherwise a subsequent crash could cause the master to lose WAL that
has already been applied on the slave, resulting in the slave being out of
sync and soon corrupt. Per recent discussion and an example from Robert Haas.
Fujii Masao
description for vacuum_defer_cleanup_age to the correct category.
Sections in postgresql.conf are also sorted in the same order with docs.
Per gripe by Fujii Masao, suggestion by Heikki Linnakangas, and patch by me.
and retry. If the record is genuinely corrupt in the master database,
there's little hope of recovering, but it's better than simply retrying
to apply the corrupt WAL record in a tight loop without even trying to
retransmit it, which is what we used to do.
string for a streaming replication connection. It's ignored by the
server, but allows libpq to pick up the password from .pgpass where
"replication" is specified as the database name.
Patch by Fujii Masao per Tom's suggestion, with some wording changes by me.
pg_last_xlog_replay_location(). Per Robert Haas's suggestion, after
Itagaki Takahiro pointed out an issue in the docs. Also, some wording
changes in the docs by me.
While my previous attempt seems to always produce valid YAML, it
doesn't always produce YAML that means what it appears to mean,
because of tokens like "0xa" and "true", which without quotes will
be interpreted as integer or Boolean literals. So, instead, just
quote everything that's not known to be a number, as we do for
JSON.
Dean Rasheed, with some changes to the comments by me.
checkpoint_timeout to trigger restartpoints. We used to deliberately only
do time-based restartpoints, because if checkpoint_segments is small we
would spend time doing restartpoints more often than really necessary.
But now that restartpoints are done in bgwriter, they're not as
disruptive as they used to be. Secondly, because streaming replication
stores the streamed WAL files in pg_xlog, we want to clean it up more
often to avoid running out of disk space when checkpoint_timeout is large
and checkpoint_segments small.
Patch by Fujii Masao, with some minor changes by me.
the current one. Not doing this would leave the walwriter with a handle to a
deleted file if there was nothing for it to do for a long period of time,
preventing the file from being completely removed.
Reported by Tollef Fog Heen, and thanks to Heikki for some hand-holding with
the patch.
The previous code failed to quote in many cases where quoting was necessary -
YAML has loads of special characters, including -:[]{},"'|*& - so quote much
more aggressively, and only refrain from quoting things where it seems fairly
clear that it isn't necessary.
Per report from Dean Rasheed.
to be initialized with proper values. Affected parameters are
fillfactor, analyze_threshold, and analyze_scale_factor.
Especially uninitialized fillfactor caused inefficient page usage
because we built a StdRdOptions struct in which fillfactor is zero
if any reloption is set for the toast table.
In addition, we disallow toast.autovacuum_analyze_threshold and
toast.autovacuum_analyze_scale_factor because we didn't actually
support them; they are always ignored.
Report by Rumko on pgsql-bugs on 12 May 2010.
Analysis by Tom Lane and Alvaro Herrera. Patch by me.
Backpatch to 8.4.
and current server clock time to SR data messages. These are not currently
used on the slave side but seem likely to be useful in future, and it'd be
better not to change the SR protocol after release. Per discussion.
Also do some minor code review and cleanup on walsender.c, and improve the
protocol documentation.
We must filter out hashtable entries with frequencies less than those
specified by the algorithm, else we risk emitting junk entries whose
actual frequency is much less than other lexemes that did not get
tabulated. This is bad enough by itself, but even worse is that
tsquerysel() believes that the minimum frequency seen in pg_statistic is a
hard upper bound for lexemes not included, and was thus underestimating
the frequency of non-MCEs.
Also, set the threshold frequency to something with a little bit of theory
behind it, to wit assume that the input distribution is approximately
Zipfian. This might need adjustment in future, but some preliminary
experiments suggest that it's not too unreasonable.
Back-patch to 8.4, where this code was introduced.
Jan Urbanski, with some editorialization by Tom
"val AS name" to "name := val", as per recent discussion.
This patch catches everything in the original named-parameters patch,
but I'm not certain that no other dependencies snuck in later (grepping
the source tree for all uses of AS soon proved unworkable).
In passing I note that we've dropped the ball at least once on keeping
ecpg's lexer (as opposed to parser) in sync with the backend. It would
be a good idea to go through all of pgc.l and see if it's in sync now.
I didn't attempt that at the moment.
output stream. This typically indicates that the user quit out of $PAGER,
or that we are writing to a file and ran out of disk space. In either case
we shouldn't bother to continue fetching data.
Stephen Frost
end of the pattern: the code path that handles \ just after % should throw
error too. As in the previous patch, not back-patching for fear of breaking
apps that worked before.
for sure ;-)). It now also optimizes more cases, such as %_%_. Improve
comments too. Per bug #5478.
In passing, also rename the TCHAR macro to GETCHAR, because pgindent is
messing with the formatting of the former (apparently it now thinks TCHAR
is a typedef name).
Back-patch to 8.3, where the bug was introduced.
is treated like end-of-input, if nulls sort last in that column and we are not
doing outer-join filling for that input. In such a case, the tuple cannot
join to anything from the other input (because we assume mergejoinable
operators are strict), and neither can any tuple following it in the sort
order. If we're not interested in doing outer-join filling we can just
pretend the tuple and its successors aren't there at all. This can save a
great deal of time in situations where there are many nulls in the join
column, as in a recent example from Scott Marlowe. Also, since the planner
tends to not count nulls in its mergejoin scan selectivity estimates, this
is an important fix to make the runtime behavior more like the estimate.
I regard this as an omission in the patch I wrote years ago to teach mergejoin
that tuples containing nulls aren't joinable, so I'm back-patching it. But
only to 8.3 --- in older versions, we didn't have a solid notion of whether
nulls sort high or low, so attempting to apply this optimization could break
things.
This saves cycles in get_ps_display() on many popular platforms, and more
importantly ensures that get_ps_display() will correctly return an empty
string if init_ps_display() hasn't been called yet. Per trouble report
from Ray Stell, in which log_line_prefix %i produced junk early in backend
startup.
Back-patch to 8.0. 7.4 doesn't have %i and its version of get_ps_display()
makes no pretense of avoiding pad junk anyhow.
immutable, but that is wrong in general because the cast from the polymorphic
argument to text could be stable or even volatile. Mark them volatile for
safety. In the typical case where the cast isn't volatile, the planner will
deduce the correct expression volatility after inlining the function, so
performance is not lost. The just-committed fix in CREATE INDEX also ensures
this won't break any indexing cases that ought to be allowed.
Per discussion, I'm not bumping catversion for this change, as it doesn't
seem critical enough to force an initdb on beta testers.
before it checks whether the expression is immutable. This covers two cases
that were previously handled poorly:
1. SQL function inlining could reduce the apparent volatility of the
expression, allowing an expression to be accepted where it previously would
not have been. As an example, polymorphic functions must be marked with the
worst-case volatility they have for any argument type, but for specific
argument types they might not be so volatile, so indexing could be allowed.
(Since the planner will refuse to inline functions in cases where the
apparent volatility of the expression would increase, this won't break
any cases that were accepted before.)
2. A nominally immutable function could have default arguments that are
volatile expressions. In such a case insertion of the defaults will increase
both the apparent and actual volatility of the expression, so it is
*necessary* to check this before allowing the expression to be indexed.
Back-patch to 8.4, where default arguments were introduced.
In particular, it's bad to start walreceiver when in state
PM_WAIT_BACKENDS, because we have no provision to kill walreceiver
when in that state.
Fujii Masao
otherwise we effectively rate-limit the streaming as pointed out by
Simon Riggs. Also, send the WAL in smaller chunks, to respond to signals
more promptly.
additional cases correctly. The original coding failed to load additional
(chain) certificates from the client cert file, meaning that indirectly signed
client certificates didn't work unless one hacked the server's root.crt file
to include intermediate CAs (not the desired approach). Another problem was
that everything got loaded into the shared SSL_context object, which meant
that concurrent connections trying to use different sslcert settings could
well fail due to conflicting over the single available slot for a keyed
certificate.
To fix, get rid of the use of SSL_CTX_set_client_cert_cb(), which is
deprecated anyway in the OpenSSL documentation, and instead just
unconditionally load the client cert and private key during connection
initialization. This lets us use SSL_CTX_use_certificate_chain_file(),
which does the right thing with additional certs, and is lots simpler than
the previous hacking about with BIO-level access. A small disadvantage is
that we have to load the primary client cert a second time with
SSL_use_certificate_file, so that that one ends up in the correct slot
within the connection's SSL object where it can get paired with the key.
Given the other overhead of making an SSL connection, that doesn't seem
worth worrying about.
Per discussion ensuing from bug #5468.
During Hot Standby we need to check for buffer pin deadlocks when the
Startup process begins to wait, in case it never wakes up again. We
previously made the deadlock check immediately on the basis it was
cheap, though clearer thinking and prima facie evidence shows that
was too simple. Refactor existing code to make it easy to add in
deferral of deadlock check until deadlock_timeout allowing a good
reduction in deadlock checks since far few buffer pins are held for
that duration. It's worth doing anyway, though major goal is to
prevent further reports of context switching with high numbers of
users on occasional tests.
requests for client certs. This lets a client with a keystore select the
appropriate client certificate to send. In particular, this is necessary
to get Java clients to work in all but the most trivial configurations.
Per discussion of bug #5468.
Craig Ringer
1. If we receive a fast shutdown request while in the PM_STARTUP state,
process it just as we would in PM_RECOVERY, PM_HOT_STANDBY, or PM_RUN.
Without this change, an early fast shutdown followed by Hot Standby causes
the database to get stuck in a state where a shutdown is pending (so no new
connections are allowed) but the shutdown request is never processed unless
we end Hot Standby and enter normal running.
2. Avoid removing the backup label file when a smart or fast shutdown occurs
during recovery. It makes sense to do this once we've reached normal running,
since we must be taking a backup which now won't be valid. But during
recovery we must be recovering from a previously taken backup, and any backup
label file is needed to restart recovery from the right place.
Fujii Masao and Robert Haas
If the original IN operator is cross-type, for example int8 = int4,
we need to use int4 < int4 to sort the inner data and int4 = int4
to unique-ify it. We got the first part of that right, but tried to
use the original IN operator for the equality checks. Per bug #5472
from Vlad Romascanu.
Backpatch to 8.4, where the bug was introduced by the patch that unified
SortClause and GroupClause. I was able to take out a whole lot of on-the-fly
calls of get_equality_op_for_ordering_op(), but failed to realize that
I needed to put one back in right here :-(
Asia/Novosibirsk on Windows.
Microsoft changed the behaviour of this zone in the timezone update
from KB976098. The zones differ in handling of DST, and the old
zone was just removed.
Noted by Dmitry Funk
is specified. Per bug report from Russell Smith and ensuing discussion.
Since this is a corner case behavioral change, I'm going to be conservative
and not back-patch it.
In passing, also rename the RestoreOptions field for the -C switch to
something less generic than "create".
that is a regular table or view owned by a superuser. This prevents a
trojan horse attack whereby any unprivileged SQL user could create such a
table and insert code into it that would then get executed in other users'
sessions whenever they call pltcl functions.
Worse yet, because the code was automatically loaded into both the "normal"
and "safe" interpreters at first use, the attacker could execute unrestricted
Tcl code in the "normal" interpreter without there being any pltclu functions
anywhere, or indeed anyone else using pltcl at all: installing pltcl is
sufficient to open the hole. Change the initialization logic so that the
"unknown" code is only loaded into an interpreter when the interpreter is
first really used. (That doesn't add any additional security in this
particular context, but it seems a prudent change, and anyway the former
behavior violated the principle of least astonishment.)
Security: CVE-2010-1170
fundamentally insecure. Instead apply an opmask to the whole interpreter that
imposes restrictions on unsafe operations. These restrictions are much harder
to subvert than is Safe.pm, since there is no container to be broken out of.
Backported to release 7.4.
In releases 7.4, 8.0 and 8.1 this also includes the necessary backporting of
the two interpreters model for plperl and plperlu adopted in release 8.2.
In versions 8.0 and up, the use of Perl's POSIX module to undo its locale
mangling on Windows has become insecure with these changes, so it is
replaced by our own routine, which is also faster.
Nice side effects of the changes include that it is now possible to use perl's
"strict" pragma in a natural way in plperl, and that perl's $a and
$b variables now work as expected in sort routines, and that function
compilation is significantly faster.
Tim Bunce and Andrew Dunstan, with reviews from Alex Hunsaker and
Alexey Klyukin.
Security: CVE-2010-1169
mkinstalldirs used to handle no arguments, but mkdir doesn't.
Also remove the .SILENT setting, that was previously removed from
Makefile.global as well.
so simply leads to data waiting in wal_buffers which then causes
later commits to potentially do emergency writes and for all forms
of replication to be potentially delayed without need or benefit.
Issue pointed out exactly by Fujii Masao, following bug report
by Robert Haas on a separate though related topic.
of requirements and documentation on LogStandbySnapshot(). Fixes
two minor bugs reported by Tom Lane that would lead to an incorrect
snapshot after transaction wraparound. Also fix two other problems
discovered that would give incorrect snapshots in certain cases.
ProcArrayApplyRecoveryInfo() substantially rewritten. Some minor
refactoring of xact_redo_apply() and ExpireTreeKnownAssignedTransactionIds().
archive_command) as soon as possible, namely just before issuing a new call
of archive_command, even when there is a backlog of files to be archived.
The original coding would only absorb new settings after clearing the backlog
and returning to the outer loop. Per discussion.
Back-patch to 8.3. The logic in prior versions is a bit different and it
doesn't seem worth taking any risks of breaking it.
Now validators work properly even when the settings contain
parameters that affect behavior of the function, like search_path.
Reported by Erwin Brandstetter.
MIN or MAX, we must take care to insert the added qual in a legal place among
the existing indexquals, if any. The btree index AM requires the quals to
appear in index-column order. We didn't have to worry about this before
because "target IS NOT NULL" was just treated as a plain scan filter condition;
but as of 9.0 it can be an index qual and then it has to follow the rule.
Per report from Ian Barwick.
My initial impression that glibc was measuring the precision in characters
(which is what the Linux man page says it does) was incorrect. It does take
the precision to be in bytes, but it also tries to truncate the string at a
character boundary. The bottom line remains the same: it will mess up
if the string is not in the encoding it expects, so we need to avoid %.*s
anytime there's a significant risk of that. Previous code changes are still
good, but adjust the comments to reflect this knowledge. Per research by
Hernan Gonzalez.
Depending on which spec you read, field widths and precisions in %s may be
counted either in bytes or characters. Our code was assuming bytes, which
is wrong at least for glibc's implementation, and in any case libc might
have a different idea of the prevailing encoding than we do. Hence, for
portable results we must avoid using anything more complex than just "%s"
unless the string to be printed is known to be all-ASCII.
This patch fixes the cases I could find, including the psql formatting
failure reported by Hernan Gonzalez. In HEAD only, I also added comments
to some places where it appears safe to continue using "%.*s".
refers to itself (directly or indirectly). Instead, print a message when
recursion is detected, and don't expand the repeated reference. Per bug
#5448 from Francis Markham.
Back-patch to 8.0. Although the issue exists in 7.4 as well, it seems
impractical to fix there because of the lack of any state stack that
could be used to track active expansions.
minRecoveryPoint in control file when replaying a parameter change record,
to ensure that we don't allow hot standby on WAL generated without
wal_level='hot_standby' after a standby restart.
field of the WAL record. The previous coding always wrote to the main fork,
resulting in data corruption if the page was meant to go into a non-default
fork.
At present, the only operation that can produce such WAL records is
ALTER TABLE/INDEX SET TABLESPACE when executed with archive_mode = on.
Data corruption would be observed on standby slaves, and could occur on the
master as well if a database crash and recovery occurred after committing
the ALTER and before the next checkpoint. Per report from Gordon Shannon.
Back-patch to 8.4; the problem doesn't exist in earlier branches because
we didn't have a concept of multiple relation forks then.
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
returns EINVAL for an existing shared memory segment. Although it's not
terribly sensible, that behavior does meet the POSIX spec because EINVAL
is the appropriate error code when the existing segment is smaller than the
requested size, and the spec explicitly disclaims any particular ordering of
error checks. Moreover, it does in fact happen on OS X and probably other
BSD-derived kernels. (We were able to talk NetBSD into changing their code,
but purging that behavior from the wild completely seems unlikely to happen.)
We need to distinguish collision with a pre-existing segment from invalid size
request in order to behave sensibly, so it's worth some extra code here to get
it right. Per report from Gavin Kistner and subsequent investigation.
Back-patch to all supported versions, since any of them could get used
with a kernel having the debatable behavior.
memory if the result had zero rows, and also if there was any sort of error
while converting the result tuples into Python data. Reported and partially
fixed by Andres Freund.
Back-patch to all supported versions. Note: I haven't tested the 7.4 fix.
7.4's configure check for python is so obsolete it doesn't work on my
current machines :-(. The logic change is pretty straightforward though.
to perform a backup without archive_mode being enabled. This gives up some
user-error protection in order to improve usefulness for streaming-replication
scenarios. Per discussion.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
contrib/intarray is loaded. Per bug #5417 from Kenaniah Cerny.
Not forcing initdb since backend doesn't directly depend on this,
and few people have run into it.
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
to RFC 3986. In particular, these characters now terminate the path part
of a URL: '"', '<', '>', '\', '^', '`', '{', '|', '}'. The previous behavior
was inconsistent and depended on whether a "?" was present in the path.
Per gripe from Donald Fraser and spec research by Kevin Grittner.
This is a pre-existing bug, but not back-patching since the risks of
breaking existing applications seem to outweigh the benefits.
and be more tense about the locking requirements for it, to improve performance
in Hot Standby mode. In passing fix a few bugs and improve a number of
comments in the existing HS code.
Simon Riggs, with some editorialization by Tom
in WAL recovery when it sees the shutdown checkpoint record. It's more
user-friendly to find out about it at that point than at the end of
recovery, and you're not left wondering why your hot standby server never
opens up for read-only connections.
Normal superuser processes are allowed to connect even when the database
system is shutting down, or when fewer than superuser_reserved_connection
slots remain. This is intended to make sure an administrator can log in
and troubleshoot, so don't extend these same courtesies to users connecting
for replication.
of parameters. Fix bug report by Robert Haas that error message and
hint was incorrect if wrong mode parameters specified on master.
Internal changes only. Proposals for parameter simplification on
master/primary still under way.
come from the realistion that HEAP2_CLEAN records don't
always remove user visible data, so conflict processing for
them can be skipped. Confirm validity using Assert checks,
clarify circumstances under which we log heap_cleanup_info
records. Tuning arises from bug fixing of earlier safety
check failures.
from lc_ctype, that could happen on Windows. We need to change lc_ctype
together with lc_monetary or lc_numeric, and convert strings in lconv
from lc_ctype encoding to the database encoding.
The bug reported by Mikko, original patch by Hiroshi Inoue,
with changes by Bruce and me.
than during define_custom_variable(). This entails rejecting an ALTER
command if the target variable doesn't have a known (non-placeholder)
definition, unless the calling user is superuser. When the variable *is*
known, we can correctly apply the rule that only superusers can issue ALTER
for SUSET parameters. This allows define_custom_variable to apply ALTER's
values for SUSET parameters at module load time, secure in the knowledge
that only a superuser could have set the ALTER value. This change fixes a
longstanding gotcha in the usage of SUSET-level custom parameters; which
is a good thing to fix now that plpgsql defines such a parameter.
There is no other purpose for this message type than to report
the latestRemovedXid of removed tuples, prior to index scans.
Removes overlooked path for sending invalid latestRemovedXid.
Fixes buildfarm failure on centaur.
to handling of btree delete records mean that all snapshot
conflicts on standby now have a valid, useful latestRemovedXid.
Our earlier approach using LW_EXCLUSIVE was useful when we didnt
always have a valid value, though is no longer useful or necessary.
Asserts added to code path to prove and ensure this is the case.
This will reduce contention and improve performance of larger Hot
Standby servers.
vacuum_log_cleanup_info() now generates log records with a valid
latestRemovedXid set in all cases. Also be careful not to zero the
value when we do a round of vacuuming part-way through lazy_scan_heap().
Incidentally, this reduces frequency of conflicts in Hot Standby.
with database = replication. The previous coding would allow them to match
ordinary records too, but that seems like a recipe for security breaches.
Improve the messages associated with no-such-pg_hba.conf entry to report
replication connections as such, since that's now a critical aspect of
whether the connection matches. Make some cursory improvements in the related
documentation, too.
database to connect to. This is necessary for the walsender code to work
properly (it was previously using an untenable assumption that template1 would
always be available to connect to). This also gets rid of a small security
shortcoming that was introduced in the original patch to eliminate the flat
authentication files: before, you could find out whether or not the requested
database existed even if you couldn't pass the authentication checks.
The changes needed to support this are mainly just to treat pg_authid and
pg_auth_members as nailed relations, so that we can read them without having
to be able to locate real pg_class entries for them. This mechanism was
already debugged for pg_database, but we hadn't recognized the value of
applying it to those catalogs too.
Since the current code doesn't have support for accessing toast tables before
we've brought up all of the relcache, remove pg_authid's toast table to ensure
that no one can store an out-of-line toasted value of rolpassword. The case
seems quite unlikely to occur in practice, and was effectively unsupported
anyway in the old "flatfiles" implementation.
Update genbki.pl to actually implement the same rules as bootstrap.c does for
not-nullability of catalog columns. The previous coding was a bit cheesy but
worked all right for the previous set of bootstrap catalogs. It does not work
for pg_authid, where rolvaliduntil needs to be nullable.
Initdb forced due to minor catalog changes (mainly the toast table removal).
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
those process types that go through InitPostgres; in particular, bootstrap
and standalone-backend cases. This ensures that we have set up a PGPROC
and done some other basic initialization steps (corresponding to the
if (IsUnderPostmaster) block in AuxiliaryProcessMain) before we attempt to
run WAL recovery in a standalone backend. As was discovered last September,
this is necessary for some corner-case code paths during WAL recovery,
particularly end-of-WAL cleanup.
Moving the bootstrap case here too is not necessary for correctness, but it
seems like a good idea since it reduces the number of distinct code paths.
libpq to send queries, making the waiting for responses interruptible on
platforms where PQexec() can't normally be interrupted by signals, such
as win32.
Fujii Masao and Magnus Hagander
The logic for determining whether to materialize has been significantly
overhauled for 9.0. In case there should be any doubt about whether
materialization is a win in any particular case, this should provide a
convenient way of seeing what happens without it; but even with enable_material
turned off, we still materialize in cases where it is required for
correctness.
Thanks to Tom Lane for the review.
Now doesn't report it is waiting until it actually is waiting,
plus message doesn't appear until at least 5 seconds wait, so
we avoid reporting the wait before we've given the archiver
a reasonable time to wake up and archive the file we just
created earlier in the function.
Also add new unconditional message to confirm safe completion.
Now a normal, healthy execution does not report waiting at
all, just safe completion.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
reload and rotation signals, and a helper thread reads messages from the
pipe and writes them to the log file. However, server code isn't generally
thread-safe, so if both try to do e.g palloc()/pfree() at the same time,
bad things will happen. To fix that, use a critical section (which is like
a mutex) to enforce that only one the threads are active at a time.
even when the expression is a query that returns no rows.
So far as I can tell, the only caller that actually fails when a garbage
OID is returned is exec_stmt_case(), which is new in 8.4 --- in all other
cases, we might make a useless trip through casting logic, but we won't
fail since the isnull flag will be set. Hence, backpatch only to 8.4,
just in case there are apps out there that aren't expecting an error to
be thrown if the query returns more or less than one column. (Which seems
unlikely, since the error would be thrown if the query ever did return a
row; but it's possible there's some never-exercised code out there.)
Per report from Mario Splivalo.
relcache reload works. In the patched code, a relcache entry in process of
being rebuilt doesn't get unhooked from the relcache hash table; which means
that if a cache flush occurs due to sinval queue overrun while we're
rebuilding it, the entry could get blown away by RelationCacheInvalidate,
resulting in crash or misbehavior. Fix by ensuring that an entry being
rebuilt has positive refcount, so it won't be seen as a target for removal
if a cache flush occurs. (This will mean that the entry gets rebuilt twice
in such a scenario, but that's okay.) It appears that the problem can only
arise within a transaction that has previously reassigned the relfilenode of
a pre-existing table, via TRUNCATE or a similar operation. Per bug #5412
from Rusty Conover.
Back-patch to 8.2, same as the patch that introduced the problem.
I think that the failure can't actually occur in 8.2, since it lacks the
rd_newRelfilenodeSubid optimization, but let's make it work like the later
branches anyway.
Patch by Heikki, slightly editorialized on by me.
after actually removing one, so that if we can't remove segments because
WAL archiving is lagging behind, we don't unnecessarily forbid streaming
the old not-yet-archived segments that are still perfectly valid. Per
suggestion from Fujii Masao.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
Windows timezone name where the information in the registry is
incomplete, instead of aborting.
This fixes cases when the registry information is incomplete for
a timezone that is alphabetically before the one that is in use.
Per report from Alexander Forschner
At present, killing the startup process does not release any locks it holds,
so we must wait to stop the startup and walreceiver processes until all
read-only backends have exited. Without this patch, the startup and
walreceiver processes never exit, so the server gets permanently stuck in
a half-shutdown state.
Fujii Masao, with review, docs, and comment adjustments by me.
rather than only sort-of working as the previous attempt had left it.
Clean up some unnecessary differences between the way these were coded and
the way the YYYY case was coded. Update the regression test cases that
proved that it wasn't working.
recovery. We might want to relax this in the future, but ThisTimeLineID
isn't currently correct in backends during recovery, so the filename
returned was wrong.
Add missing completions for:
- ALTER SEQUENCE name OWNER TO
- ALTER TYPE name RENAME TO
- ALTER VIEW name ALTER COLUMN
- ALTER VIEW name OWNER TO
- ALTER VIEW name SET SCHEMA
Fix wrong completions for:
- ALTER FUNCTION/AGGREGATE name (arguments) ...
"(arguments)" has been ignored.
- ALTER ... SET SCHEMA
"SCHEMA" has been considered as a variable name.
is changed to match the hard-wired default. This avoids accumulating useless
catalog entries, and also provides a path for dropping the owning role without
using DROP OWNED BY. Per yesterday's complaint from Jaime Casanova, the
need to use DROP OWNED BY for that is less than obvious, so providing this
alternative method might save some user frustration.
be added during GRANT and can only be removed during REVOKE; and fix its
callers to not lie to it about the existing set of dependencies when
instantiating a formerly-default ACL. The previous coding accidentally failed
to malfunction so long as default ACLs contain only references to the object's
owning role, because that role is ignored by updateAclDependencies. However
this is obviously pretty fragile, as well as being an undocumented assumption.
The new coding is a few lines longer but IMO much clearer.
Those options do nothing right now, but might be wanted later, and in
any case it's confusing for the command to be interpreted as \dd if
anything is appended. Per Jaime Casanova.
This allows us to see what mode the server is in before it starts to
perform actions that can block or hang. Otherwise server messages
may not appear until after messages that say FATAL the database
server is starting up.
Windows, thanks to a feature in CRT called Parameter Validation.
Backpatch to 8.2, which is the oldest version supported on Windows. In
8.2 and 8.3 also backpatch the earlier change to use DEVNULL instead of
NULL_DEV #define for a /dev/null-like device. NULL_DEV was hard-coded to
"/dev/null" regardless of platform, which didn't work on Windows, while
DEVNULL works on all platforms. Restarting syslogger didn't work on
Windows on versions 8.3 and below because of that.
The error message now makes explicit reference to the GUC that must be changed
to fix the problem, using wording suggested by Tom Lane. Along the way,
rename the GUC from MaxWalSenders to max_wal_senders for consistency and
grep-ability.
constraint exclusion on an inheritance set that is the target of an UPDATE
or DELETE query. Per gripe from Marc Cousin. Back-patch to 8.4 where
the feature was introduced.
pg_xlog directory. This is essential for replaying WAL records that
were streamed from the master, after a standby server restart.
If a corrupt record is seen in a file restored from the archive or
streamed from the master, log it as a WARNING and keep retrying. If the
corruption is permanent, and not just a glitch in the whatever copies the
files to the archive or a network error not caught by CRC checks in TCP
for example, we will keep retrying and logging the WARNING indefinitely.
But that's better than shutting down completely, the standby is still
useful for running read-only queries. In PITR the recovery ends at such a
corrupt record, which is a bit questionable, but that's the behavior we
had in previous releases and we don't feel like chaning it now. It does
make sense for tools like pg_standby.
example to 'on or 'off' rather than 'true' or 'false', as shown
in docs. Add restartpoint_command. Add section header for recovery
target parameters, matching docs.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
by a superuser -- "ALTER USER f RESET setting" already disallows removing such a
setting.
Apply the same treatment to ALTER DATABASE d RESET ALL when run by a database
owner that's not superuser.
doing nothing, caused by naptime specified in milliseconds yet units of
pg_usleep() parameter is microseconds. Correctly specifying units
reduces call frequency by 1000. Reduction in CPU consumption verified.
Informix allows variables as argument to the embedded SQL command FREE. Given
that we only allow freeing cursors via FREE for compatibility reasons only we
should do the same.
commandline option "-i". This change fixes this and adds a test case. It also
honors #include_next, although this is probably never used for embedded SQL.
so that we won't try to attach any context printouts to messages that get
emitted while exiting. Per report from Dennis Koegel, the context functions
won't necessarily work after we've started shutting down the backend, and it
seems possible that debug_query_string could be pointing at freed storage
as well. The context information doesn't seem particularly relevant to
such messages anyway, so there's little lost by suppressing it.
Back-patch to all supported branches. I can only demonstrate a crash with
log_disconnections messages back to 8.1, but the risk seems real in 8.0 and
before anyway.
catalog entries via SearchSysCache and related operations. Although, at the
time that these callbacks are called by elog.c, we have not officially aborted
the current transaction, it still seems rather risky to initiate any new
catalog fetches. In all these cases the needed information is readily
available in the caller and so it's just a matter of a bit of extra notation
to pass it to the callback.
Per crash report from Dennis Koegel. I've concluded that the real fix for
his problem is to clear the error context stack at entry to proc_exit, but
it still seems like a good idea to make the callbacks a bit less fragile
for other cases.
Backpatch to 8.4. We could go further back, but the patch doesn't apply
cleanly. In the absence of proof that this fixes something and isn't just
paranoia, I'm not going to expend the effort.
was broken for a replication connection and no messages were
displayed on either standby or primary, at any debug level.
Connection messages needed to diagnose session drop/reconnect
events. Use LOG mode for now, discuss lowering in later releases.
present since 8.0 was never fully meaningful, since two recovery targets
cannot be specified. Refactor recovery target type to make this change
and associated code easier to understand. No change in function.
Bug report arising from internal support question.
field into WAL record and reset it from there, rather than using
FrozenTransactionId which can lead to some corner case bugs.
Problem report and suggested route to a fix from Heikki, details by me.
In PLy_spi_execute_plan, use the data-type specific Python-to-PostgreSQL
conversion function instead of passing everything through InputFunctionCall
as a string. The equivalent fix was already done months ago for function
parameters and return values, but this other gateway between Python and
PostgreSQL was apparently forgotten. As a result, data types that need
special treatment, such as bytea, would misbehave when used with
plpy.execute.
in recovery_end_command, it always came out as 0 because InRedo was
cleared before recovery_end_command was executed. Also, always take
ControlFileLock when reading checkpoint location for %r.
The recovery_end_command bug and the missing locking was present in 8.4
as well, that part of this patch will be backported separately.
to transformAggregateCall, instead of abusing fields in Aggref to carry them
temporarily. No change in functionality but hopefully the code is a bit
clearer now. Per gripe from Gokulakannan Somasundaram.
unable to read a stats file for reasons other than ENOENT, and having to reset
last_statrequest because it's later than current time in the collector.
Not clear if this will shed any light on the "pgstat wait timeout" business,
but it seems like a good idea in general.
In passing, do some message-style-police work on recently-added
pgstat_reset_shared_counters code.
corner cases that come up in certain timezones (apparently, only those with
lots and lots of distinct TZ transition rules, as far as I can gather from
a quick scan of their archives). Per suggestion from Jeevan Chalke.
Back-patch to 8.4. Possibly we need to push this into earlier releases
as well, but I'm hesitant to update them to the 64-bit tzcode without
more thought and testing.
by joining to pg_constraint.conindid, instead of the former technique of
joining indirectly through pg_depend. This is much more straightforward
and probably faster as well. I had originally desisted from changing these
queries when conindid was added because I was worried about losing
performance, but if we join on conrelid as well as conindid then the index
on conrelid can be used when pg_constraint is large.
instead of an exclusive lock.
The change is almost for code cleanup. Since there seems to be no
performance benefits from it, backports should not be needed.
Fujii Masao
The latter is considered unwarranted chumminess with the implementation,
and can lead to crashes with recent Perl versions.
Report and fix by Tim Bunce. Back-patch to all versions containing the
questionable coding pattern.
--single-transaction are both used and the failure happens in commit,
e.g. failed deferred trigger. Also properly free BEGIN/COMMIT result
structures from --single-transaction.
Per report from Dominic Bevacqua
when warning about column-level privileges. This is more useful than before
and makes the apparent duplication complained of by Piyush Newe not so
duplicate. Also fix lack of quote marks in a related message text.
Back-patch to 8.4, where column-level privileges were introduced.
Stephen Frost
unless (1) the @ isn't quoted and (2) the filename isn't empty. This guards
against unexpectedly treating usernames or other strings in "flat files"
as inclusion requests, as seen in a recent trouble report from Ed L.
The empty-filename case would be guaranteed to misbehave anyway, because our
subsequent path-munging behavior results in trying to read the directory
containing the current input file.
I think this might finally explain the report at
http://archives.postgresql.org/pgsql-bugs/2004-05/msg00132.php
of a crash after printing "authentication file token too long, skipping",
since I was able to duplicate that message (though not a crash) on a
platform where stdio doesn't refuse to read directories. We never got
far in investigating that problem, but now I'm suspicious that the trigger
condition was an @ in the flat password file.
Back-patch to all active branches since the problem can be demonstrated in all
branches except HEAD. The test case, creating a user named "@", doesn't cause
a problem in HEAD since we got rid of the flat password file. Nonetheless it
seems like a good idea to not consider quoted @ as a file inclusion spec,
so I changed HEAD too.
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
too, instead of duplicating the functionality (badly).
I renamed xml_init to pg_xml_init, because the former seemed just a bit too
generic to be safe as a global symbol. I considered likewise renaming
xml_ereport to pg_xml_ereport, but felt that the reference to ereport probably
made it sufficiently PG-centric already.
section, throw an error message saying explicitly that the label must go
before DECLARE. Per investigation of a recent pgsql-novice question,
this code did not work as intended in any modern PG version, maybe not ever.
Allowing such a thing would only create ambiguity anyway, so it seems better
to remove it than fix it.
Per bug #5352, this helps to provide a useful error message if the user
tries to do something presently unsupported, namely use a rowtype variable
as a member of a multiple-item INTO list.
formats; a null string must not be formatted as a numeric. The more exotic
formats latex and troff also incorrectly formatted all strings as numerics
when numericlocale was on.
Backpatch to 8.1 where numericlocale option was added.
This fixes bug #5355 reported by Andy Lester.
the fact that NetBSD/mips is currently broken, as per buildfarm member pika.
Also add regression tests to ensure that get_float8_nan and get_float4_nan
are exercised even on platforms where they are not needed by
float8in/float4in.
Zoltán Böszörményi and Tom Lane
We had originally made the stronger assumption that NOT A refutes any B
if B implies A, but this fails in three-valued logic, because we need to
prove B is false not just that it's not true. However the logic does
go through if B is equal to A.
Recognizing this limited case is enough to handle examples that arise when
we have simplified "bool_var = true" or "bool_var = false" to just "bool_var"
or "NOT bool_var". If we had not done that simplification then the
btree-operator proof logic would have been able to prove that the expressions
were contradictory, but only for identical expressions being compared to the
constants; so handling identical A and B covers all the same cases.
The motivation for doing this is to avoid unexpected asymmetrical behavior
when a partitioned table uses a boolean partitioning column, as in today's
gripe from Dominik Sander.
Back-patch to 8.2, which is as far back as predicate_refuted_by attempts to
do anything at all with NOTs.
how often we do SSL session key renegotiation. Can be set to
0 to disable renegotiation completely, which is required if
a broken SSL library is used (broken patches to CVE-2009-3555
a known cause) or when using a client library that can't do
renegotiation.
This was evidently broken by the CREATE TABLE OF TYPE patch. It would have
been noticed if anyone had bothered to try dumping and restoring the
regression database ...
will work whether or not the specified language is preinstalled. This
responds to some complaints about having to change test scripts because
plpgsql is preinstalled as of 9.0.
This operates in the same way as other CREATE OR REPLACE commands, ie,
it replaces everything but the ownership and ACL lists of an existing
entry, and requires the caller to have owner privileges for that entry.
While modifying an existing language has some use in development scenarios,
in typical usage all the "replaced" values come from pg_pltemplate so there
will be no actual change in the language definition. The reason for adding
this is mainly to allow programs to ensure that a language exists without
triggering an error if it already does exist.
This commit just adds and documents the new option. A followon patch
will use it to clean up some unpleasant cases in pg_dump and pg_regress.
"dumping data out of order is not supported" to "restoring data out of order
is not supported", because you get that error during pg_restore not pg_dump.
Also fix some comments that didn't look so good after being pgindented as
perhaps they did originally.
on a platform that doesn't support this operation. The former coding
would allow an unrelated errno to be reported, which would be quite
misleading. Not sure if this has anything to do with the current
buildfarm failures, but it's certainly bogus as-is.
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
tuple, instead of the former cpu_tuple_cost. It is sane to charge less than
cpu_tuple_cost because Materialize never does any qual-checking or projection,
so it's got less overhead than most plan node types. In particular, we want
to have the same charge here as is charged for readout in cost_sort. That
avoids the problem recently exhibited by Teodor wherein the planner prefers
a useless sort over a materialize step in a context where a lot of rescanning
will happen. The rescan costs should be just about the same for both node
types, so make their estimates the same.
Not back-patching because all of the current logic for rescan cost estimates
is new in 9.0. The old handling of rescans is sufficiently not-sane that
changing this in that structure is a bit pointless, and might indeed cause
regressions.
- The message "server stopped" should be affected by the -s option, just
like "server started" already was.
- The message "could not start server" should consistently go to stderr.
enabled. Bypassing the kernel cache is counter-productive in that case,
because the archiver/walsender process will read from the WAL file
soon after it's written, and if it's not cached the read will cause
a physical read, eating I/O bandwidth available on the WAL drive.
Also, walreceiver process does unaligned writes, so disable O_DIRECT
in walreceiver process for that reason too.
segment of XLOG_BACKUP_END record even if the the record is placed
at a segment boundary. Furthermore the previous implementation could
return nonexistent segment file name when the boundary is in segments
that has "FE" suffix; We never use segments with "FF" suffix.
Backpatch to 8.0, where hot backup was introduced.
Reported by Fujii Masao.
old memory context in plpython. Before only one of them was marked
volatile, but per report from Zdenek Kotala, some compilers do the
wrong thing here.
ArrayRef expressions that are not in the immediate context of an INSERT or
UPDATE targetlist. Such cases never arise in stored rules, so ruleutils.c
hadn't tried to handle them. However, they do occur in the targetlists of
plans derived from such statements, and now that EXPLAIN VERBOSE tries to
print targetlists, we need some way to deal with the case.
I chose to represent an assignment ArrayRef as "array[subscripts] := source",
which is fairly reasonable and doesn't omit any information. However,
FieldStore is problematic because the planner will fold multiple assignments
to fields of the same composite column into one FieldStore, resulting in a
structure that is hard to understand at all, let alone display comprehensibly.
So in that case I punted and just made it print the source expression(s).
Backpatch to 8.4 --- the lack of functionality exists in older releases,
but doesn't seem to be important for lack of anything that would call it.
being assigned to, in case the expression to be assigned is a FieldStore that
would need to modify that value. The need for this was foreseen some time
ago, but not implemented then because we did not have arrays of composites.
Now we do, but the point evidently got overlooked in that patch. Net result
is that updating a field of an array element doesn't work right, as
illustrated if you try the new regression test on an unpatched backend.
Noted while experimenting with EXPLAIN VERBOSE, which has also got some issues
in this area.
Backpatch to 8.3, where arrays of composites were introduced.
is aborted, if they were created within the failed xact. This prevents
ExecutorEnd from being run on them, which is a good idea because they may
contain references to tables or other objects that no longer exist.
In particular this is hazardous when auto_explain is active, but it's
really rather surprising that nobody has seen an issue with this before.
I'm back-patching this to 8.4, since that's the first version that contains
auto_explain or an ExecutorEnd hook, but I wonder whether we shouldn't
back-patch further.
a separate archive entry for each BLOB, and use pg_dump's standard methods
for dealing with its ownership, ACL if any, and comment if any. This means
that switches like --no-owner and --no-privileges do what they're supposed
to. Preliminary testing says that performance is still reasonable even
with many blobs, though we'll have to see how that shakes out in the field.
KaiGai Kohei, revised by me
Newly supported syntax are:
- ALTER {TABLE|INDEX|TABLESPACE} {SET|RESET} with options
- ALTER TABLE ALTER COLUMN {SET|RESET} with options
- ALTER TABLE ALTER COLUMN SET STORAGE
- CREATE INDEX CONCURRENTLY
- CREATE INDEX ON (without name)
- CREATE INDEX ... USING with pg_am.amname instead of hard-corded names
- CREATE TRIGGER with events
- DROP AGGREGATE function with arguments
all the values derived from oldestXid, not just that field. Brain fade in
one of my patches associated with flat file removal, exposed by a report
from Fujii Masao.
With this change, xidVacLimit should always be valid, so remove a couple of
bits of complexity associated with the previous assumption that sometimes
it wouldn't get set right away.
NAMEDATALEN, so this code doesn't go nuts with smaller than default
BLCKSZ or larger than default NAMEDATALEN. The standard value is
still exactly 8000.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
Prevent use of another buggy version of Safe.pm.
Only register the exit handler if we have successfully created an interpreter.
Change log level of perl warnings from NOTICE to WARNING.
The infrastructure is there if in future we decide to allow
DBAs to specify extra modules that will be allowed in trusted code.
However, for now the relevant variables are declared as lexicals
rather than as package variables, so that they are not (or should not be)
accessible.
Mostly code from Tim Bunce, reviewed by Alex Hunsaker, with some
tweaks by me.
and use this in pq_getbyte_if_available.
It's only a limited implementation which swithes the whole emulation layer
no non-blocking mode, but that's enough as long as non-blocking is only
used during a short period of time, and only one socket is accessed during
this time.
and move the context information into errcontext instead of errmsg.
This makes them better conform to our guidelines.
Also remove a few errcode declarations that were providing the default
value ERRCODE_INTERNAL_ERROR.
all the data and using posix_fadvise to nudge the OS into flushing it
earlier. This also hopefully makes CREATE DATABASE avoid spamming the
cache.
Tests show a big speedup on Linux at least on some filesystems.
Idea and patch from Andres Freund.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
prefix, instead of assuming it will always be following the default layout.
All information we need is not available on Windows, but the number of
assumptions are at least fewer this way than before.
Based on suggestions from James William Pye.
defined. Its reference to CurrentMemoryContext causes link failures on some
platforms, evidently because the inline function gets compiled despite lack of
use. Per buildfarm member warthog.
where a database has a non-default tablespaceid. Pass thru MyDatabaseId
and MyDatabaseTableSpace to allow file path to be re-created in
standby and correct invalidation to take place in all cases.
Update and rework xact_commit_desc() debug messages.
Bug report from Tom by code inspection. Fix by me.
compilers, by applying a configure check to see if the compiler will accept
an unreferenced "static inline foo ..." function without warnings. It is
believed that such warnings are the only reason not to declare inlined
functions in headers, if the compiler understands "inline" at all.
Kurt Harriman
process. If startup waits on a buffer pin we send a request to all
backends to cancel themselves if they are holding the buffer pin
required and they are also waiting on a lock. If not, startup waits
until max_standby_delay before cancelling any backend waiting for
the requested buffer pin.
before we start analyzing the parent statement. This is to make it
more clear that the WITH isn't affected by anything in the parent.
I don't believe there's any actual bug here, because the stuff that
was being done before WITH didn't affect subqueries; but it's certainly
a potential for error (and apparently misled Marko into committing some
real errors...).
that happens to be composite itself. Per bug #5314 from Oleg Serov.
Backpatch to 8.0 --- 7.4 has got too many other shortcomings in
composite-type support to make this worth worrying about in that branch.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
echo all the recovery.conf options. Don't emit the "initializing
recovery connections" message, which doesn't mean anything to a user.
Remove the "starting archive recovery" message and replace the
"automatic recovery in progress" message with a more informative message
saying whether the server is doing PITR, normal archive recovery, or
standby mode.
a partial WAL file, assume it's because the file is just being copied to
the archive and treat it the same as "file not found" in standby mode.
pg_standby has a similar check, so it seems reasonable to have the same
level of protection in the built-in standby mode.
several places, but for now only GIN uses it during index creation.
Using self-balanced tree greatly speeds up index creation in corner cases
with preordered data.
restoring from archive, the last WAL segment is not necessarily open at
the end of recovery. Fix assertion that assumed that.
Fujii Masao, fixing the assertion failure reported by Martin Pihlak.
The previous coding missed a bet by sometimes picking the "sorted" path
from query_planner even though hashing would be preferable. To fix, we have
to be willing to make the choice sooner. This contorts things a little bit,
but I thought of a factorization that makes it not too awful.
Move rd_targblock, rd_fsm_nblocks, and rd_vm_nblocks from relcache to the smgr
relation entries, so that they will get reset to InvalidBlockNumber whenever
an smgr-level flush happens. Because we now send smgr invalidation messages
immediately (not at end of transaction) when a relation truncation occurs,
this ensures that other backends will reset their values before they next
access the relation. We no longer need the unreliable assumption that a
VACUUM that's doing a truncation will hold its AccessExclusive lock until
commit --- in fact, we can intentionally release that lock as soon as we've
completed the truncation. This patch therefore reverts (most of) Alvaro's
patch of 2009-11-10, as well as my marginal hacking on it yesterday. We can
also get rid of assorted no-longer-needed relcache flushes, which are far more
expensive than an smgr flush because they kill a lot more state.
In passing this patch fixes smgr_redo's failure to perform visibility-map
truncation, and cleans up some rather dubious assumptions in freespace.c and
visibilitymap.c about when rd_fsm_nblocks and rd_vm_nblocks can be out of
date.
truncating the table and transaction commit. This isn't really making
it safe, but at least there is no good reason to do free space map
cleanup within the risk window. Don't lock out cancel interrupts
until we have to, either.
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
recovery. It's zeroed out whenever a checkpoint is written, so the only
scenario where the removed code did anything is when you kill archive
recovery, remove recovery.conf, and start up the server, so that it goes
into crash recovery instead. That's a "don't do that" scenario, but it
seems better to not clear minRecoveryPoint but instead update it like we
do in archive recovery, which is what will now happen.
needed by nothing else.
The restructuring I just finished doing on cache management exposed to me how
silly this routine was. Its function was to go into the catcache and blow
away all entries related to a given relation when there was a relcache flush
on that relation. However, there is no point in removing a catcache entry
if the catalog row it represents is still valid --- and if it isn't valid,
there must have been a catcache entry flush on it, because that's triggered
directly by heap_update or heap_delete on the catalog row. So this routine
accomplished nothing except to blow away valid cache entries that we'd very
likely be wanting in the near future to help reconstruct the relcache entry.
Dumb.
On top of which, it required a subtle and easy-to-get-wrong attribute in
syscache definitions, ie, the column containing the OID of the related
relation if any. Removing that is a very useful maintenance simplification.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
as per my recent proposal.
First, teach IndexBuildHeapScan to not wait for INSERT_IN_PROGRESS or
DELETE_IN_PROGRESS tuples to commit unless the index build is checking
uniqueness/exclusion constraints. If it isn't, there's no harm in just
indexing the in-doubt tuple.
Second, modify VACUUM FULL/CLUSTER to suppress reverifying
uniqueness/exclusion constraint properties while rebuilding indexes of
the target relation. This is reasonable because these commands aren't
meant to deal with corrupted-data situations. Constraint properties
will still be rechecked when an index is rebuilt by a REINDEX command.
This gets us out of the problem that new-style VACUUM FULL would often
wait for other transactions while holding exclusive lock on a system
catalog, leading to probable deadlock because those other transactions
need to look at the catalogs too. Although the real ultimate cause of
the problem is a debatable choice to release locks early after modifying
system catalogs, changing that choice would require pretty serious
analysis and is not something to be undertaken lightly or on a tight
schedule. The present patch fixes the problem in a fairly reasonable
way and should also improve the speed of VACUUM FULL/CLUSTER a little bit.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
If expand_dbname is non-zero and dbname contains an = sign, it is taken as
a conninfo string in exactly the same way as if it had been passed to
PQconnectdb. This is equivalent to the way PQsetdbLogin() works, allowing
PQconnectdbParams() to be a complete alternative.
Also improve the way the new function is called from psql and replace a
previously missed call to PQsetdbLogin() in psql. Additionally use
PQconnectdbParams() for pg_dump and friends, and the bin/scripts
command line utilities such as vacuumdb, createdb, etc.
Finally, update the documentation for the new parameter, as well as the
nuances of precedence in cases where key words are repeated or duplicated
in the conninfo string.
of old and new toast tables can be done either at the logical level (by
swapping the heaps' reltoastrelid links) or at the physical level (by swapping
the relfilenodes of the toast tables and their indexes). This is necessary
infrastructure for upcoming changes to support CLUSTER/VAC FULL on shared
system catalogs, where we cannot change reltoastrelid. The physical swap
saves a few catalog updates too.
We unfortunately have to keep the logical-level swap logic because in some
cases we will be adding or deleting a toast table, so there's no possibility
of a physical swap. However, that only happens as a consequence of schema
changes in the table, which we do not need to support for system catalogs,
so such cases aren't an obstacle for that.
In passing, refactor the cluster support functions a little bit to eliminate
unnecessarily-duplicated code; and fix the problem that while CLUSTER had
been taught to rename the final toast table at need, ALTER TABLE had not.
heap_sync() to the callers, because heap_sync() is sometimes called even
if the operation itself is WAL-logged. This eliminates the bogus unlogged
records from CLUSTER that Simon Riggs reported, patch by Fujii Masao.
DROP USER at the end of the cluster.sql test could fail, if the temp
table created in the previous session hadn't finished getting dropped.
Unluckily, I didn't see this in several repetitions of the parallel
regression tests, but it's popping up on quite a few buildfarm machines.
the relfilenode of currently-not-relocatable system catalogs.
1. Get rid of inval.c's dependency on relfilenode, by not having it emit
smgr invalidations as a result of relcache flushes. Instead, smgr sinval
messages are sent directly from smgr.c when an actual relation delete or
truncate is done. This makes considerably more structural sense and allows
elimination of a large number of useless smgr inval messages that were
formerly sent even in cases where nothing was changing at the
physical-relation level. Note that this reintroduces the concept of
nontransactional inval messages, but that's okay --- because the messages
are sent by smgr.c, they will be sent in Hot Standby slaves, just from a
lower logical level than before.
2. Move setNewRelfilenode out of catalog/index.c, where it never logically
belonged, into relcache.c; which is a somewhat debatable choice as well but
better than before. (I considered catalog/storage.c, but that seemed too
low level.) Rename to RelationSetNewRelfilenode.
3. Cosmetic cleanups of some other relfilenode manipulations.
relations (they don't live in pg_toast). This caused an Assert failure in
assert-enabled builds. So far as I can see, in a non-assert build it would
only have messed up the checks for conflicting names, so a failure would be
quite improbable but perhaps not impossible.
All callers of FindConversionByName() already do suitable permissions
checking already apart from this function, but this is not just dead
code removal: the unnecessary permissions check can actually lead to
spurious failures - there's no reason why inability to execute the
underlying function should prohibit renaming the conversion, for example.
(The error messages in these cases were also rather poor:
FindConversion would return InvalidOid, eventually leading to a complaint
that the conversion "did not exist", which was not correct.)
KaiGai Kohei
When a column is renamed, we recursively rename the same column in
all descendent tables. But if one of those tables also inherits that
column from a table outside the inheritance hierarchy rooted at the
named table, we must throw an error. The previous coding correctly
prohibited the rename when the parent had inherited the column from
elsewhere, but overlooked the case where the parent was OK but a child
table also inherited the same column from a second, unrelated parent.
For now, not backpatched due to lack of complaints from the field.
KaiGai Kohei, with further changes by me.
Reviewed by Bernd Helme and Tom Lane.
We show the number of buckets, the number of batches (and also the original
number if it has changed), and the peak space used by the hash table. Minor
executor changes to track peak space used.
the input values into a string. The two argument version also does the same
thing, but inserts delimiters between elements.
Original patch by Pavel Stehule, reviewed by David E. Wheeler and me.
matching before recursing instead of after. The DFA match eliminates
unworkable midpoint choices a lot faster than the recursive check, in most
cases, so doing it first can speed things up; particularly in pathological
cases such as recently exhibited by Michael Glaesemann.
In addition, apply some cosmetic changes that were applied upstream (in the
Tcl project) at the same time, in order to sync with upstream version 1.15
of regexec.c.
Upstream apparently intends to backpatch this, so I will too. The
pathological behavior could be unpleasant if encountered in the field,
which seems to justify any risk of introducing new bugs.
Tom Lane, reviewed by Donal K. Fellows of Tcl project
stage of required deadlock detection to allow re-enabling max_standby_delay
setting of -1, which is now essential in the absence of improved relation-
specific conflict resoluton. Requested by Greg Stark et al.
We need to free the OID list returned by ExecInsertIndexTuples to avoid
a query-lifespan memory leak. When many rows require rechecking, this
can be a significant leak --- it's even more than the space used for the
queued trigger events.
Dean Rasheed
There was a race condition where the receiving pipe could be closed by the
child thread if the main thread was pre-empted before it got a chance to
create a new one, and the dispatch thread ran to completion during that time.
One symptom of this is that rows in pg_listener could be dropped under
heavy load.
Analysis and original patch by Radu Ilie, with some small
modifications by Magnus Hagander.
Since all current and foreseeable future command tags will be pure ASCII,
there is no need to do conversion on them. This saves a few cycles and also
avoids polluting otherwise-pristine subtransaction memory contexts, which
is the cause of the backend memory leak exhibited in bug #5302. (Someday
we'll probably want to have a better method of determining whether
subtransaction contexts need to be kept around, but today is not that day.)
Backpatch to 8.0. The cycle-shaving aspect of this would work in 7.4
too, but without subtransactions the memory-leak aspect doesn't apply,
so it doesn't seem worth touching 7.4.
(failure to free col_lineptrs[] array elements) and exacerbated in the
current devel cycle (failure to free "wrap"). This resulted in moderate
bloat of psql over long script runs. Noted while testing bug #5302,
although what the reporter was complaining of was backend-side leakage.
false positives during Hot Standby conflict processing. Simple
patch to enhance conflict processing, following previous discussions.
Controlled by parameter minimize_standby_conflicts = on | off, with
default off allows measurement of performance impact to see whether
it should be set on all the time.
records for heap and btree. Minor change, mostly API changes to
pass through the required values. This is a simple change though
also provides the refactoring required for further enhancements
to conflict processing using the relOid. Changes only have effect
during Hot Standby.
PQconnectStartParams. These are analogous to PQconnectdb and PQconnectStart
respectively. They differ from the legacy functions in that they accept
two NULL-terminated arrays, keywords and values, rather than conninfo
strings. This avoids the need to build the conninfo string in cases
where it might be inconvenient to do so. Includes documentation.
Also modify psql to utilize PQconnectdbParams rather than PQsetdbLogin.
This allows the new config parameter application_name to be set, which
in turn is displayed in the pg_stat_activity view and included in CSV
log entries. This will also ensure both new functions get regularly
exercised.
Patch by Guillaume Lelarge with review and minor adjustments by
Joe Conway.
LogwrtRqst.Write can be set to non-existent FF log segment, we mustn't
try to send that in XLogSend().
Also fix similar bug in ReadRecord(), which I just introduced in the
ReadRecord() refactoring patch.
restore_command, if the connection to the primary server is lost. This
ensures that the standby can recover automatically, if the connection is
lost for a long time and standby falls behind so much that the required
WAL segments have been archived and deleted in the master.
This also makes standby_mode useful without streaming replication; the
server will keep retrying restore_command every few seconds until the
trigger file is found. That's the same basic functionality pg_standby
offers, but without the bells and whistles.
To implement that, refactor the ReadRecord/FetchRecord functions. The
FetchRecord() function introduced in the original streaming replication
patch is removed, and all the retry logic is now in a new function called
XLogReadPage(). XLogReadPage() is now responsible for executing
restore_command, launching walreceiver, and waiting for new WAL to arrive
from primary, as required.
This also changes the life cycle of walreceiver. When launched, it now only
tries to connect to the master once, and exits if the connection fails, or
is lost during streaming for any reason. The startup process detects the
death, and re-launches walreceiver if necessary.
- Allow (ineffective) use of 'require' in plperl
If the required module is not already loaded then it dies.
So "use strict;" now works in plperl.
- Pre-load the feature module if perl >= 5.10.
So "use feature :5.10;" now works in plperl.
- Stored procedure subs are now given names.
The names are not visible in ordinary use, but they make
tools like Devel::NYTProf and Devel::Cover much more useful.
- Simplified and generalized the subroutine creation code.
Now one code path for generating sub source code, not four.
Can generate multiple 'use' statements with specific imports
(which handles plperl.use_strict currently and can easily
be extended to handle a plperl.use_feature=':5.12' in future).
- Disallows use of Safe version 2.20 which is broken for PL/Perl.
http://rt.perl.org/rt3/Ticket/Display.html?id=72068
- Assorted minor optimizations by pre-growing data structures.
Patch from Tim Bunce, reviewed by Alex Hunsaker.
default of "plpgsql". This is more reasonable than it was when the DO patch
was written, because we have since decided that plpgsql should be installed
by default. Per discussion, having a parameter for this doesn't seem useful
enough to justify the risk of application breakage if the value is changed
unexpectedly.
These files have apparently been edited over the years by a dozen people
with as many different editor settings, which made the alignment of the
paragraphs quite inconsistent and ugly. I made a pass of M-q with Emacs
to straighten it out.
and implement OVERLAY() for bit strings and bytea.
In passing also convert text OVERLAY() to a true built-in, instead of
relying on a SQL function.
Leonardo F, reviewed by Kevin Grittner
You might think this is unnecessary since that interpreter is never used
to run code --- but it turns out that's wrong. As of Tcl 8.5, the "clock"
command (alone among builtin Tcl commands) is partially implemented by
loaded-on-demand Tcl code, which means that it fails if there's not
unknown-command support, and also that it's impossible to run it directly
in a safe interpreter. The way they get around the latter is that
Tcl_CreateSlave() automatically sets up an alias command that forwards any
execution of "clock" in a safe slave interpreter to its parent interpreter.
Thus, when attempting to execute "clock" in trusted pltcl, the command
actually executes in the "hold" interpreter, where it will fail if
unknown-command support hasn't been introduced by sourcing the standard
init.tcl script, which is done by Tcl_Init(). (This is a pretty dubious
design decision on the Tcl boys' part, if you ask me ... but they didn't.)
Back-patch all the way. It's not clear that anyone would try to use ancient
versions of pltcl with a recent Tcl, but it's not clear they wouldn't, either.
Also add a regression test using "clock", in branches that have regression
test support for pltcl.
Per recent trouble report from Kyle Bateman.
AbortTransaction or AbortSubTransaction, when trying to clean up after an
error that prevented (sub)transaction start from completing:
* access to TopTransactionResourceOwner that might not exist
* assert failure in AtEOXact_GUC, if AtStart_GUC not called yet
* assert failure or core dump in AfterTriggerEndSubXact, if
AfterTriggerBeginSubXact not called yet
Per testing by injecting elog(ERROR) at successive steps in StartTransaction
and StartSubTransaction. It's not clear whether all of these cases could
really occur in the field, but at least one of them is easily exposed by
simple stress testing, as per my accidental discovery yesterday.
the various disk-size-reporting functions will respond to query cancel
reasonably promptly even in very large databases. Per report from
Kevin Grittner.
woken by alarm we send SIGUSR1 to all backends requesting that they
check to see if they are blocking Startup process. If so, they throw
ERROR/FATAL as for other conflict resolutions. Deadlock stop gap
removed. max_standby_delay = -1 option removed to prevent deadlock.
Attributes can now have options, just as relations and tablespaces do, and
the reloptions code is used to parse, validate, and store them. For
simplicity and because these options are not performance critical, we store
them in a separate cache rather than the main relcache.
Thanks to Alex Hunsaker for the review.
PQescapeLiteral is similar to PQescapeStringConn, but it relieves the
caller of the need to know how large the output buffer should be, and
it provides the appropriate quoting (in addition to escaping special
characers within the string). PQescapeIdentifier provides similar
functionality for escaping identifiers.
Per recent discussion with Tom Lane.
Discuss the reasons for the lock type we hold on ProcArrayLock while deriving
the conflict list. Cover the idea of false positive conflicts and seemingly
strange effects on snapshot derivation.
that would've been WAL-logged if archiving was enabled. If we encounter
such records in archive recovery anyway, we know that some data is
missing from the log. A WARNING is emitted in that case.
Original patch by Fujii Masao, with changes by me.
binary, revert PGDLLIMPORT decoration of global variables. I'm not sure
if there's any real harm from unnecessary PGDLLIMPORTs, but these are all
internal variables that external modules really shouldn't be messing
with. ThisTimeLineID still needs PGDLLIMPORT.
walreceiver as whole into a dynamically loaded module, split the
libpq-specific parts of it into dynamically loaded module and keep the rest
in the main backend binary.
Although Tom fixed the Windows compilation problems with the old walreceiver
module already, this is a cleaner division of labour and makes the code
more readable. There's also the prospect of adding new transport methods
as pluggable modules in the future, which this patch makes easier, though for
now the API between libpqwalreceiver and walreceiver process should be
considered private.
The libpq-specific module is now in src/backend/replication/libpqwalreceiver,
and the part linked with postgres binary is in
src/backend/replication/walreceiver.c.
name already exists, so we'd get an error message about a "type" instead
of about a "relation", because the composite type code shares code with
relation creation.
quote_literal, quote_nullable, quote_ident,
encode_bytea, decode_bytea, looks_like_number,
encode_array_literal, encode_array_constructor.
Split SPI.xs into two - SPI.xs now contains only SPI functions. Remainder
are in new Util.xs.
Some more code and documentation cleanup along the way, as well as
adding some CVS markers to files missing them.
Original patch from Tim Bunce, with a little editing from me.
dump IDs, because the array we're using is sized according to the highest
dump ID actually defined in the archive file. In a partial dump there could
be references to higher dump IDs that weren't dumped. Treat these the same
as references to in-range IDs that weren't dumped. (The whole thing is a
bit scary because the missing objects might have been part of dependency
chains, which we won't know about. Not much we can do though --- throwing
an error is probably overreaction.)
Also, reject parallel restore with pre-1.8 archive version (made by pre-8.0
pg_dump). In these old versions the dependency entries are OIDs, not dump
IDs, and we don't have enough information to interpret them.
Per bug #5288 from Jon Erdman.
when the planner splits apart a ROW(...) IS NULL test, the argisrow values
of the component tests have to be determined from the component field types,
not copied from the original NullTest (in which argisrow is surely true).
This is the last EXECUTE-like plpgsql statement that was missing
the capability of inserting parameter values via USING.
Pavel Stehule, reviewed by Itagaki Takahiro
EXISTS that contains a WITH clause. This would usually lead to a
"could not find CTE" error later in planning, because the WITH wouldn't
get processed at all. Noted while playing with an example from Ken Marshall.
after it's released its reference count for the cached plan. There are
code paths that might try to examine the plan list before noticing that
the portal is already in aborted state. Report and diagnosis by Tatsuo
Ishii, though this isn't exactly his proposed patch.
pg_constraint before searching pg_trigger. This allows saner handling of
corner cases; in particular we now say "constraint is not deferrable"
rather than "constraint does not exist" when the command is applied to
a constraint that's inherently non-deferrable. Per a gripe several months
ago from hubert depesz lubaczewski.
To make this work without breaking user-defined constraint triggers,
we have to add entries for them to pg_constraint. However, in return
we can remove the pgconstrname column from pg_constraint, which represents
a fairly sizable space savings. I also replaced the tgisconstraint column
with tgisinternal; the old meaning of tgisconstraint can now be had by
testing for nonzero tgconstraint, while there is no other way to get
the old meaning of nonzero tgconstraint, namely that the trigger was
internally generated rather than being user-created.
In passing, fix an old misstatement in the docs and comments, namely that
pg_trigger.tgdeferrable is exactly redundant with pg_constraint.condeferrable.
Actually, we mark RI action triggers as nondeferrable even when they belong to
a nominally deferrable FK constraint. The SET CONSTRAINTS code now relies on
that instead of hard-coding a list of exception OIDs.
against concurrent reconnection. Failure during testing showed issue
was possible, even though earlier analysis seemed to indicate it
would not be required. Use LockSharedObjectForSession() before
ResolveRecoveryConflictWithDatabase() and hold lock until end of
processing for that WAL record. Simple approach to avoid introducing
further bugs at this stage of development on an improbable issue.
Mimic the Python interpreter's own logic for printing exceptions instead
of just using the straight str() call, so that
you get
plpy.SPIError
instead of
<class 'plpy.SPIError'>
and for built-in exceptions merely
UnicodeEncodeError
Besides looking better this cuts down on the endless version differences
in the regression test expected files.
Conflict reason is passed through directly to the backend, so we can
take decisions about the effect of the conflict based upon the local
state. No specific changes, as yet, though this prepares for later work.
CancelVirtualTransaction() sends signals while holding ProcArrayLock.
Introduce errdetail_abort() to give message detail explaining that the
abort was caused by conflict processing. Remove CONFLICT_MODE states
in favour of using PROCSIG_RECOVERY_CONFLICT states directly, for clarity.
parse analysis phase, rather than at execution time. This makes parameter
handling work the same as it does in ordinary plannable queries, and in
particular fixes the incompatibility that Pavel pointed out with plpgsql's
new handling of variable references. plancache.c gets a little bit
grottier, but the alternatives seem worse.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
of this are to centralise the conflict code to allow further change,
as well as to allow passing through the full reason for the conflict
through to the conflicting backends. Backend state alters how we
can handle different types of conflict so this is now required.
As originally suggested by Heikki, no longer optional.
rather than trying to implement the equivalent logic by hand. The motivation
for the original coding appears to have been to check with the effective uid's
permissions not the real uid's; but there is no longer any difference, because
we don't run the postmaster setuid (indeed, main.c enforces that they're the
same). Using access() means we will get it right in situations the original
coding failed to handle, such as ACL-based permissions. Besides it's a lot
shorter, cleaner, and more thread-safe. Per bug #5275 from James Bellinger.
underlying catalog not only the index itself. Otherwise, if the cache
load process touches the catalog (which will happen for many though not
all of these indexes), we are locking index before parent table, which can
result in a deadlock against processes that are trying to lock them in the
normal order. Per today's failure on buildfarm member gothic_moth; it's
surprising the problem hadn't been identified before.
Back-patch to 8.2. Earlier releases didn't have the issue because they
didn't try to lock these indexes during load (instead assuming that they
couldn't change schema at all during multiuser operation).
especially not ROLLBACK. ROLLBACK might need to be executed in an already
aborted transaction, when there is no safe way to revalidate the plan. But
in general there's no point in marking utility statements invalid, since
they have no plans in the normal sense of the word; so we might as well
work a bit harder here to avoid future revalidation cycles.
Back-patch to 8.4, where the bug was introduced.
For non-SQL3 types ecpg used to return -Oid. This will break if there are
enough Oids to fill the namespace. Therefore we play it safe and return 0 if
there is no Oid->SQL3 tyoe mapping available.
in the parameter array. Noted while experimenting with an example
from Pavel. This wouldn't come up in normal use, but it ought to honor
the specification that a parameter array can have unused slots.
occurring during a reload, such as query-cancel. Instead of zeroing out
an existing relcache entry and rebuilding it in place, build a new relcache
entry, then swap its contents with the old one, then free the new entry.
This avoids problems with code believing that a previously obtained pointer
to a cache entry must still reference a valid entry, as seen in recent
failures on buildfarm member jaguar. (jaguar is using CLOBBER_CACHE_ALWAYS
which raises the probability of failure substantially, but the problem
could occur in the field without that.) The previous design was okay
when it was made, but subtransactions and the ResourceOwner mechanism
make it unsafe now.
Also, make more use of the already existing rd_isvalid flag, so that we
remember that the entry requires rebuilding even if the first attempt fails.
Back-patch as far as 8.2. Prior versions have enough issues around relcache
reload anyway (due to inadequate locking) that fixing this one doesn't seem
worthwhile.
can upgrade clusters without renaming the tablespace directories. New
directory structure format is, e.g.:
$PGDATA/pg_tblspc/20981/PG_8.5_201001061/719849/83292814
rowtype contains dropped columns. Sometimes the input tuple will be formed
from a select targetlist in which dropped columns are filled with a NULL
of an arbitrary type (the planner typically uses INT4, since it can't tell
what type the dropped column really was). So we need to relax the rowtype
compatibility check to not insist on physical compatibility if the actual
column value is NULL.
In principle we might need to do this for functions returning composite
types, too (see tupledesc_match()). In practice there doesn't seem to be
a bug there, probably because the function will be using the same cached
rowtype descriptor as the caller. Fixing that code path would require
significant rearrangement, so I left it alone for now.
Per complaint from Filip Rembialkowski.
generic syntax error, when seeing "foo := something" and foo isn't recognized.
This buys back most of the helpfulness discarded in my previous patch by not
throwing errors when a qualified name appears to match a row variable but the
last component doesn't match any field of the row. It covers other cases
where our error messages left something to be desired, too.
field references in SQL expressions to have RECFIELD datum-array entries at
parse time. If it turns out that the reference is actually to a SQL column,
the RECFIELD entry is useless, but it costs little. This allows us to get rid
of the previous use of FieldSelect applied to a whole-row Param for the record
variable; which was not only slower than a direct RECFIELD reference, but
failed for references to system columns of a trigger's NEW or OLD record.
Per report and fix suggestion from Dean Rasheed.
Previously we only cancelled sessions that were in-transaction.
Simple fix is to just cancel all sessions without waiting. Doing
it this way avoids complicating common code paths, which would
not be worth the trouble to cover this rare case.
Problem report and fix by Andres Freund, edited somewhat by me
This silences some warnings on Win64. Not using the proper SOCKET datatype
was actually wrong on Win32 as well, but didn't cause any warnings there.
Also create define PGINVALID_SOCKET to indicate an invalid/non-existing
socket, instead of using a hardcoded -1 value.
Previously, fastgetattr() and heap_getattr() tested their fourth argument
against a null pointer, but any attempt to use them with a literal-NULL
fourth argument evaluated to *(void *)0, resulting in a compiler error.
Remove these NULL tests to avoid leading future readers of this code to
believe that this has a chance of working. Also clean up related legacy
code in nocachegetattr(), heap_getsysattr(), and nocache_index_getattr().
The new coding standard is that any code which calls a getattr-type
function or macro which takes an isnull argument MUST pass a valid
boolean pointer. Per discussion with Bruce Momjian, Tom Lane, Alvaro
Herrera.
extract a system column, and remove a couple of lines that are useless
in light of the fact that we aren't ever going to support this case. There
isn't much point in trying to make this work because a tuple Datum does
not carry many of the system columns. Per experimentation with a case
reported by Dean Rasheed; we'll have to fix his problem somewhere else.
deletion, so that we attempt to unlink the correct filepath. unlink()
errors are ignorable there, so lack of a DatabasePath initialization step
did not cause visible problems until a related bug showed up on Solaris.
Code refactored from xact_redo_commit() to
ProcessCommittedInvalidationMessages() in inval.c. Recovery may replay
shared invalidation messages for many databases, so we cannot
SetDatabasePath() once as we do in normal backends. Read the databaseid
from the shared invalidation messages, then set DatabasePath
temporarily before calling RelationCacheInitFileInvalidate().
Problem report by Robert Treat, analysis and fix by me.
- Changed MULTIPLICITY check from runtime to compiletime.
No loads the large Config module.
- Changed plperl_init_interp() to return new interp
and not alter the global interp_state
- Moved plperl_safe_init() call into check_interp().
- Removed plperl_safe_init_done state variable
as interp_state now covers that role.
- Changed plperl_create_sub() to take a plperl_proc_desc argument.
- Simplified return value handling in plperl_create_sub.
- Changed perl.com link in the docs to perl.org and tweaked
wording to clarify that require, not use, is what's blocked.
- Moved perl code in large multi-line C string literal macros
out to plc_*.pl files.
- Added a test2macro.pl utility to convert the plc_*.pl files to
macros in a perlchunks.h file which is #included
- Simplifed plperl_safe_init() slightly
- Optimized pg_verifymbstr calls to avoid unneeded strlen()s.
Patch from Tim Bunce, with minor editing from me.
someone else has just updated it, we have to set priorXmax to that tuple's
xmax (ie, the XID of the other xact that updated it) before looping back to
examine the next tuple. Obviously, the next tuple in the update chain should
have that XID as its xmin, not the same xmin as the preceding tuple that we
had been trying to lock. The mismatch would cause the EvalPlanQual logic to
decide that the tuple chain ended in a deletion, when actually there was a
live tuple that should have been found.
I inserted this error when recently adding logic to EvalPlanQual to make it
lock tuples before returning them (as opposed to the old method in which the
lock would occur much later, causing a great deal of work to be wasted if we
only then discover someone else updated it). Sigh. Per today's report from
Takahiro Itagaki of inconsistent results during pgbench runs.
of the string". The previous coding treated only -1 that way, and would
produce an invalid result value for other negative values.
We ought to fix it so that 2-parameter bit substring() is a different C
function and the 3-parameter form throws error for negative length, but
that takes a pg_proc change which is impractical in the back branches;
and in any case somebody might be relying on -1 working this way.
So just do this as a back-patchable fix.
It is absolutely not okay to throw an ereport(ERROR) in any random place in
the code just because DoingCommandRead is set; interrupting, say, OpenSSL
in the midst of its activities is guaranteed to result in heartache.
Instead of that, undo the original optimizations that threw away
QueryCancelPending anytime we were starting or finishing a command read, and
instead discard the cancel request within ProcessInterrupts if we find that
there is no HS reason for forcing a cancel and we are DoingCommandRead.
In passing, may I once again condemn the practice of changing the code
and not fixing the adjacent comment that you just turned into a lie?
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
Add missing varlena header to TableSpaceOpts structure. And, per
Tom Lane, instead of calling tablespace_reloptions in CacheMemoryContext,
call it in the caller's memory context and copy the value over
afterwards, to reduce the chances of a session-lifetime memory leak.
provide a working 64-bit integer datatype. As recently noted, we've been
broken on such platforms since early in the 8.4 development cycle. Since
it took nearly two years for anyone to even notice, it seems that the
rationale for continuing to support such platforms has reached the point
of non-existence. Rather than thrashing around to try to make it work
again, we'll just admit up front that this no longer works.
Back-patch to 8.4 since that branch is also broken.
We should go around to remove INT64_IS_BUSTED support, but just in HEAD,
so that seems like material for a separate commit.
VACUUM FULL was renamed to VACUUM FULL INPLACE. Also added a new
option -i, --inplace for vacuumdb to perform FULL INPLACE vacuuming.
Since the new VACUUM FULL uses CLUSTER infrastructure, we cannot
use it for system tables. VACUUM FULL for system tables always
fall back into VACUUM FULL INPLACE silently.
Itagaki Takahiro, reviewed by Jeff Davis and Simon Riggs.
peculiar variant of UNION ALL, and so wouldn't likely get written directly
as-is, it's possible for it to arise as a result of simplification of
less-obviously-silly queries. In particular, now that we can do flattening
of subqueries that have constant outputs and are underneath an outer join,
it's possible for the case to result from simplification of queries of the
type exhibited in bug #5263. Back-patch to 8.4 to avoid a functionality
regression for this type of query.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
and allow using config.pl to override the defaults. config.pl is removed from
the repository, so changes there will no longer show up when doing diff, and
will not prevent switching branches and such things.
config.pl would normally be used to override single values, but if an
old-style config.pl is read, it will override the entire default configuration,
making it backwards compatible.
symbols both using __declspec(dllexport) (via the PGDLLIMPORT macro) and using
full-dll-export. This works without warning on Win32, but not on Win64.
In passing, fix the fact that the framework could never deal with more than
one disbled linker warning - because MSVC wants commas between linker warnings,
and semicolons between compiler warnings...
files when they haven't changed. This confuses make because the build fails
to update the file timestamps, and so it keeps on doing the action over again.
pg_attribute, by having genbki.pl derive the information from the various
catalog header files. This greatly simplifies modification of the
"bootstrapped" catalogs.
This patch finally kills genbki.sh and Gen_fmgrtab.sh; we now rely entirely on
Perl scripts for those build steps. To avoid creating a Perl build dependency
where there was not one before, the output files generated by these scripts
are now treated as distprep targets, ie, they will be built and shipped in
tarballs. But you will need a reasonably modern Perl (probably at least
5.6) if you want to build from a CVS pull.
The changes to the MSVC build process are untested, and may well break ---
we'll soon find out from the buildfarm.
John Naylor, based on ideas from Robert Haas and others
trigger tuple modification or SPI call, to ensure they are valid in the
server encoding. Along the way, replace uses of SvPV(foo, PL_na)
with SvPV_nolen(foo) as recommended in the perl docs. Bug report from
Hannu Krosing.
where to install DATA and DOCS files. This is mainly intended to allow
versioned installation, eg, install into contrib/fooM.N/ rather than
directly into contrib/.
Mark Cave-Ayland
recovery instead of reading the backup history file. This is more robust,
as it stops you from prematurely starting up an inconsisten cluster if the
backup history file is lost for some reason, or if the base backup was
never finished with pg_stop_backup().
This also paves the way for a simpler streaming replication patch, which
doesn't need to care about backup history files anymore.
The backup history file is still created and archived as before, but it's
not used by the system anymore. It's just for informational purposes now.
Bump PG_CONTROL_VERSION as the location of the backup startpoint is now
written to a new field in pg_control, and catversion because initdb is
required
Original patch by Fujii Masao per Simon's idea, with further fixes by me.
"column < constant", and the comparison value is in the first or last
histogram bin or outside the histogram entirely, try to fetch the actual
column min or max value using an index scan (if there is an index on the
column). If successful, replace the lower or upper histogram bound with
that value before carrying on with the estimate. This limits the
estimation error caused by moving min/max values when the comparison
value is close to the min or max. Per a complaint from Josh Berkus.
It is tempting to consider using this mechanism for mergejoinscansel as well,
but that would inject index fetches into main-line join estimation not just
endpoint cases. I'm refraining from that until we can get a better handle
on the costs of doing this type of lookup.
indexscans would do the wrong thing if index_rescan() was called with a
NULL instead of a new set of scankeys and the index was DESC order,
because sk_strategy would not get flipped a second time. I think
that those provisions for a NULL argument are dead code now as far as the
core backend goes, but possibly somebody somewhere is still using it.
In any case, this refactoring seems clearer, and it's definitely shorter.
This is needed to avoid unwanted interference with SUBSTRING behavior,
as per bug #5257 from Roman Kononov. Also, add some basic intelligence
about character classes (bracket expressions) since we now have several
behaviors that aren't appropriate inside a character class.
As with the previous patch in this area, I'm reluctant to back-patch
since it might affect applications that are relying on the prior
behavior.
expressions: FormIndexDatum requires the estate's scantuple to already point
at the tuple the values are supposedly being extracted from. Adjust test
case so that this type of confusion will be exposed.
Per report from hubert depesz lubaczewski.
8.2beta but never carried out. This avoids repetitive tests of whether the
argument is of scalar or composite type. Also, be a bit more paranoid about
composite arguments in some places where we previously weren't checking.
to be just a minor extension of the previous patch that made "x IS NULL"
indexable, because we can treat the IS NOT NULL condition as if it were
"x < NULL" or "x > NULL" (depending on the index's NULLS FIRST/LAST option),
just like IS NULL is treated like "x = NULL". Aside from any possible
usefulness in its own right, this is an important improvement for
index-optimized MAX/MIN aggregates: it is now reliably possible to get
a column's min or max value cheaply, even when there are a lot of nulls
cluttering the interesting end of the index.
MSVCRxx runtime, not just the current + Visual Studio 6 (MSVCRT). Clearly
there can be an almost unlimited number of runtimes loaded at the same
time.
Per report from Hiroshi Inoue
This is more in keeping with modern practice, and is a first step towards
porting to Win64 (which has sizeof(pointer) > sizeof(long)).
Tsutomu Yamada, Magnus Hagander, Tom Lane
decisions about when to auto-analyze.
The previous code depended on n_live_tuples + n_dead_tuples - last_anl_tuples,
where all three of these numbers could be bad estimates from ANALYZE itself.
Even worse, in the presence of a steady flow of HOT updates and matching
HOT-tuple reclamations, auto-analyze might never trigger at all, even if all
three numbers are exactly right, because n_dead_tuples could hold steady.
To fix, replace last_anl_tuples with an accurately tracked count of the total
number of committed tuple inserts + updates + deletes since the last ANALYZE
on the table. This can still be compared to the same threshold as before, but
it's much more trustworthy than the old computation. Tracking this requires
one more intra-transaction counter per modified table within backends, but no
additional memory space in the stats collector. There probably isn't any
measurable speed difference; if anything it might be a bit faster than before,
since I was able to eliminate some per-tuple arithmetic operations in favor of
adding sums once per (sub)transaction.
Also, simplify the logic around pgstat vacuum and analyze reporting messages
by not trying to fold VACUUM ANALYZE into a single pgstat message.
The original thought behind this patch was to allow scheduling of analyzes
on parent tables by artificially inflating their changes_since_analyze count.
I've left that for a separate patch since this change seems to stand on its
own merit.
at least in some Windows versions, these functions are capable of returning
a failure indication without setting errno. That puts us into an infinite
loop if the previous value happened to be EINTR. Per report from Brendan
Hill.
Back-patch to 8.2. We could take it further back, but since this is only
known to be an issue on Windows and we don't support Windows before 8.2,
it does not seem worth the trouble.
Since the int2vector type is intended only for internal use, this patch doesn't
worry about prettifying the error messages, which has the fringe benefit of
avoiding creating additional translatable strings. For a type intended to be
used by end-users, we would want to do better, but the approach taken here
seems like the correct trade-off for this case.
Caleb Welton
find_inheritance_children(). This is a complete no-op in databases without
any inheritance. In databases where there are just a few entries in
pg_inherits, it could conceivably be a small loss. However, in databases with
many inheritance parents, it can be a big win.
and teach ANALYZE to compute such stats for tables that have subclasses.
Per my proposal of yesterday.
autovacuum still needs to be taught about running ANALYZE on parent tables
when their subclasses change, but the feature is useful even without that.
PL/pgSQL function within an exception handler. Make sure we use the right
resource owner when we create the tuplestore to hold returned tuples.
Simplify tuplestore API so that the caller doesn't need to be in the right
memory context when calling tuplestore_put* functions. tuplestore.c
automatically switches to the memory context used when the tuplestore was
created. Tuplesort was already modified like this earlier. This patch also
removes the now useless MemoryContextSwitch calls from callers.
Report by Aleksei on pgsql-bugs on Dec 22 2009. Backpatch to 8.1, like
the previous patch that broke this.
The temporary hash tables made by pgstat_collect_oids should be allocated
in a short-term memory context, which is not the default behavior of
hash_create. Noted while looking through hash_create calls in connection
with Robert Haas' recent complaint.
This is a pre-existing bug, but it doesn't seem important enough to
back-patch. The hash table is not so large that it would matter unless this
happened many times within a session, which seems quite unlikely.
probably got there via blind copy-and-paste from one of the legitimate
callers, so rearrange and comment that code a bit to make it clearer that
this isn't a necessary prerequisite to hash_create. Per observation
from Robert Haas.
Modify pg_dump --binary-upgrade and add backend support routines to
support the preservation of pg_type oids when doing a binary upgrade.
This allows user-defined composite types and arrays to be binary
upgraded.
index page split. This would result in index corruption, or even more likely
an error during WAL replay, if we were unlucky enough to crash during
end-of-recovery cleanup after having completed an incomplete GIST insertion.
Yoichi Hirai
choose an index name the same as it would do for an unnamed index constraint.
(My recent changes to the index naming logic have helped to ensure that this
will be a reasonable choice.) Per a suggestion from Peter.
A necessary side-effect is to promote CONCURRENTLY to type_func_name_keyword
status, ie, it can't be a table/column/index name anymore unless quoted.
This is not all bad, since we have heard more than once of people typing
CREATE INDEX CONCURRENTLY ON foo (...) and getting a normal index build of
an index named "concurrently", which was not what they wanted. Now this
syntax will result in a concurrent build of an index with system-chosen
name; which they can rename afterwards if they want something else.
their underlying table columns. That code was not bright enough to cope with
collision situations (ie, new name conflicts with some other column of the
index). Since there is no functional reason to do this at all, trying to
upgrade the logic to be bulletproof doesn't seem worth the trouble.
This change means that both the index name and the column names of an index
are set when it's created, and won't be automatically changed when the
underlying table columns are renamed. Neatnik DBAs are still free to rename
them manually, of course.
CREATE FOREIGN DATA WRAPPER. Arguably it wasn't a bug because the
documentation said that it's passed the catalog ID or zero, but surely
we should provide it when it's known. And there isn't currently any
scenario where it's not known, and I can't imagine having one in the
future either, so better remove the "or zero" escape hatch and always
pass a valid catalog ID. Backpatch to 8.4.
Martin Pihlak
Index expression columns are now named after the FigureColname result for
their expressions, rather than always being "pg_expression_N". Digits are
appended to this name if needed to make the column name unique within the
index. (That happens for regular columns too, thus fixing the old problem
that CREATE INDEX fooi ON foo (f1, f1) fails. Before exclusion indexes
there was no real reason to do such a thing, but now maybe there is.)
Default names for indexes and associated constraints now include the column
names of all their columns, not only the first one as in previous practice.
(Of course, this will be truncated as needed to fit in NAMEDATALEN. Also,
pkey indexes retain the historical behavior of not naming specific columns
at all.)
An example of the results:
regression=# create table foo (f1 int, f2 text,
regression(# exclude (f1 with =, lower(f2) with =));
NOTICE: CREATE TABLE / EXCLUDE will create implicit index "foo_f1_lower_exclusion" for table "foo"
CREATE TABLE
regression=# \d foo_f1_lower_exclusion
Index "public.foo_f1_lower_exclusion"
Column | Type | Definition
--------+---------+------------
f1 | integer | f1
lower | text | lower(f2)
btree, for table "public.foo"
and composite types, which are the only relkinds for which pg_dump support
exists for dumping column comments. There is no obvious usefulness for
comments on columns of sequences or toast tables; and while comments on
index columns might have some value, it's not worth the risk of compatibility
problems due to possible changes in the algorithm for assigning names to
index columns. Per discussion.
In consequence, remove now-dead code for copying such comments in CREATE TABLE
LIKE.
Rewrite or adjust various comments for clarity. Remove one bogus comment that
doesn't reflect what the code actually does. Improve the description of the
lo_compat_privileges option.
have hard-wired knowledge of the rules for naming index columns. It can
just look at the actual names in the source index, instead. Do some minor
formatting cleanup too.
contents, and PG_CONTROL_VERSION to reflect the fact that it changed
pg_control contents. (I see we did at least remember to change
XLOG_PAGE_MAGIC for the WAL contents changes.)
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
