Reclaim space from the line pointer array when heap pruning leaves
behind a contiguous group of LP_UNUSED items at the end of the array.
This happens during subsequent page defragmentation. Certain kinds of
heap line pointer bloat are ameliorated by this new optimization.
Follow-up work to commit 3c3b8a4b26, which taught VACUUM to truncate the
line pointer array in about the same way during VACUUM's second pass
over the heap. We now apply line pointer array truncation during both
the first and the second pass over the heap made by VACUUM. We can also
perform line pointer array truncation during opportunistic pruning.
Matthias van de Meent, with small tweaks by me.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAEze2Wg36%2B4at2eWJNcYNiW2FJmht34x3YeX54ctUSs7kKoNcA%40mail.gmail.com
Window functions such as row_number() always return a value higher than
the previously returned value for tuples in any given window partition.
Traditionally queries such as;
SELECT * FROM (
SELECT *, row_number() over (order by c) rn
FROM t
) t WHERE rn <= 10;
were executed fairly inefficiently. Neither the query planner nor the
executor knew that once rn made it to 11 that nothing further would match
the outer query's WHERE clause. It would blindly continue until all
tuples were exhausted from the subquery.
Here we implement means to make the above execute more efficiently.
This is done by way of adding a pg_proc.prosupport function to various of
the built-in window functions and adding supporting code to allow the
support function to inform the planner if the window function is
monotonically increasing, monotonically decreasing, both or neither. The
planner is then able to make use of that information and possibly allow
the executor to short-circuit execution by way of adding a "run condition"
to the WindowAgg to allow it to determine if some of its execution work
can be skipped.
This "run condition" is not like a normal filter. These run conditions
are only built using quals comparing values to monotonic window functions.
For monotonic increasing functions, quals making use of the btree
operators for <, <= and = can be used (assuming the window function column
is on the left). You can see here that once such a condition becomes false
that a monotonic increasing function could never make it subsequently true
again. For monotonically decreasing functions the >, >= and = btree
operators for the given type can be used for run conditions.
The best-case situation for this is when there is a single WindowAgg node
without a PARTITION BY clause. Here when the run condition becomes false
the WindowAgg node can simply return NULL. No more tuples will ever match
the run condition. It's a little more complex when there is a PARTITION
BY clause. In this case, we cannot return NULL as we must still process
other partitions. To speed this case up we pull tuples from the outer
plan to check if they're from the same partition and simply discard them
if they are. When we find a tuple belonging to another partition we start
processing as normal again until the run condition becomes false or we run
out of tuples to process.
When there are multiple WindowAgg nodes to evaluate then this complicates
the situation. For intermediate WindowAggs we must ensure we always
return all tuples to the calling node. Any filtering done could lead to
incorrect results in WindowAgg nodes above. For all intermediate nodes,
we can still save some work when the run condition becomes false. We've
no need to evaluate the WindowFuncs anymore. Other WindowAgg nodes cannot
reference the value of these and these tuples will not appear in the final
result anyway. The savings here are small in comparison to what can be
saved in the top-level WingowAgg, but still worthwhile.
Intermediate WindowAgg nodes never filter out tuples, but here we change
WindowAgg so that the top-level WindowAgg filters out tuples that don't
match the intermediate WindowAgg node's run condition. Such filters
appear in the "Filter" clause in EXPLAIN for the top-level WindowAgg node.
Here we add prosupport functions to allow the above to work for;
row_number(), rank(), dense_rank(), count(*) and count(expr). It appears
technically possible to do the same for min() and max(), however, it seems
unlikely to be useful enough, so that's not done here.
Bump catversion
Author: David Rowley
Reviewed-by: Andy Fan, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvqvp3At8++yF8ij06sdcoo1S_b2YoaT9D4Nf+MObzsrLQ@mail.gmail.com
Modify the subroutines called by RI trigger functions that want to check
if a given referenced value exists in the referenced relation to simply
scan the foreign key constraint's unique index, instead of using SPI to
execute
SELECT 1 FROM referenced_relation WHERE ref_key = $1
This saves a lot of work, especially when inserting into or updating a
referencing relation.
This rewrite allows to fix a PK row visibility bug caused by a partition
descriptor hack which requires ActiveSnapshot to be set to come up with
the correct set of partitions for the RI query running under REPEATABLE
READ isolation. We now set that snapshot indepedently of the snapshot
to be used by the PK index scan, so the two no longer interfere. The
buggy output in src/test/isolation/expected/fk-snapshot.out of the
relevant test case added by commit 00cb86e75d has been corrected.
(The bug still exists in branch 14, however, but this fix is too
invasive to backpatch.)
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Li Japin <japinli@hotmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CA+HiwqGkfJfYdeq5vHPh6eqPKjSbfpDDY+j-kXYFePQedtSLeg@mail.gmail.com
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
Introduce a new GUC recovery_prefetch. When enabled, look ahead in the
WAL and try to initiate asynchronous reading of referenced data blocks
that are not yet cached in our buffer pool. For now, this is done with
posix_fadvise(), which has several caveats. Since not all OSes have
that system call, "try" is provided so that it can be enabled where
available. Better mechanisms for asynchronous I/O are possible in later
work.
Set to "try" for now for test coverage. Default setting to be finalized
before release.
The GUC wal_decode_buffer_size limits the distance we can look ahead in
bytes of decoded data.
The existing GUC maintenance_io_concurrency is used to limit the number
of concurrent I/Os allowed, based on pessimistic heuristics used to
infer that I/Os have begun and completed. We'll also not look more than
maintenance_io_concurrency * 4 block references ahead.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (earlier version)
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (earlier version)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (earlier version)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com> (earlier version)
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> (earlier version)
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Change two macros to be static inline functions instead to keep the
data type consistent. This avoids a "comparison is always true"
warning that was occurring with -Wtype-limits. In the process, change
the names to look less like macros.
Discussion: https://postgr.es/m/20220407063505.njnnrmbn4sxqfsts@alap3.anarazel.de
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Just after committing 5891c7a8ed, a test running with debug_discard_caches=1
failed locally...
pgstat_drop_relation() neither checked pgstat_should_count_relation() nor
called pgstat_prep_relation_pending(). With debug_discard_caches=1
rel->pgstat_info wasn't set up, leading pg_stat_get_xact_tuples_inserted()
spuriously still returning > 0 while in the transaction dropping the table.
Zeroing out an lwlock in a normal build turns out to not trigger any alarms,
if nobody can use the lwlock at that moment (as the case here). But with
--disable-spinlocks --disable-atomics, the sema field needs to be initialized.
We probably should make sure that this fails on more common configurations as
well...
Per buildfarm animal rorqual
Broke with 5c279a6d35. But looks like it had been half-broken since
70e81861fa, because 'rmid' didn't refer to the current record's rmid anymore,
but to rmid from "Initialize resource managers" - a constant.
Allow extensions to specify a new custom resource manager (rmgr),
which allows specialized WAL. This is meant to be used by a Table
Access Method or Index Access Method.
Prior to this commit, only Generic WAL was available, which offers
support for recovery and physical replication but not logical
replication.
Reviewed-by: Julien Rouhaud, Bharath Rupireddy, Andres Freund
Discussion: https://postgr.es/m/ed1fb2e22d15d3563ae0eb610f7b61bb15999c0a.camel%40j-davis.com
This change affects SubTransGetTopmostTransaction(), used to find the
topmost transaction ID of a given transaction ID. The cache is able to
store one value, so as we can save the backend from unnecessary lookups
at pg_subtrans/ on repetitive calls of this routine. There is a similar
practice in transam.c, for example.
Author: Simon Riggs
Reviewed-by: Andrey Borodin, Julien Rouhaud
Discussion: https://postgr.es/m/CANbhV-G8Co=yq4v4BkW7MJDqVt68K_8A48nAZ_+8UQS7LrwLEQ@mail.gmail.com
With stats now being stored in shared memory, the GUC isn't needed
anymore. However, the pg_stat_tmp directory and PG_STAT_TMP_DIR define are
kept, as pg_stat_statements (and some out-of-core extensions) store data in
it.
Docs will be updated in a subsequent commit, together with the other pending
docs updates due to shared memory stats.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220330233550.eiwsbearu6xhuqwe@alap3.anarazel.de
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously the statistics collector received statistics updates via UDP and
shared statistics data by writing them out to temporary files regularly. These
files can reach tens of megabytes and are written out up to twice a
second. This has repeatedly prevented us from adding additional useful
statistics.
Now statistics are stored in shared memory. Statistics for variable-numbered
objects are stored in a dshash hashtable (backed by dynamic shared
memory). Fixed-numbered stats are stored in plain shared memory.
The header for pgstat.c contains an overview of the architecture.
The stats collector is not needed anymore, remove it.
By utilizing the transactional statistics drop infrastructure introduced in a
prior commit statistics entries cannot "leak" anymore. Previously leaked
statistics were dropped by pgstat_vacuum_stat(), called from [auto-]vacuum. On
systems with many small relations pgstat_vacuum_stat() could be quite
expensive.
Now that replicas drop statistics entries for dropped objects, it is not
necessary anymore to reset stats when starting from a cleanly shut down
replica.
Subsequent commits will perform some further code cleanup, adapt docs and add
tests.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: "David G. Johnston" <david.g.johnston@gmail.com>
Reviewed-By: Tomas Vondra <tomas.vondra@2ndquadrant.com> (in a much earlier version)
Reviewed-By: Arthur Zakirov <a.zakirov@postgrespro.ru> (in a much earlier version)
Reviewed-By: Antonin Houska <ah@cybertec.at> (in a much earlier version)
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
Discussion: https://postgr.es/m/20210319235115.y3wz7hpnnrshdyv6@alap3.anarazel.de
Most of pgstat uses pgstat_<verb>_<subject>() or just <verb>_<subject>(). But
not all (some introduced fairly recently by me). Rename ones that aren't
intentionally following a different scheme (e.g. AtEOXact_*).
The column 'subskiplsn' uses TYPALIGN_DOUBLE (which has 4 bytes alignment
on AIX) for storage. But the C Struct (Form_pg_subscription) has 8-byte
alignment for this field, so retrieving it from storage causes an
unaligned read.
To fix this, we rearranged the 'subskiplsn' column in the catalog so that
it naturally comes at an 8-byte boundary.
We have fixed a similar problem in commit f3b421da5f. This patch adds a
test to avoid a similar mistake in the future.
Reported-by: Noah Misch
Diagnosed-by: Noah Misch, Masahiko Sawada, Amit Kapila
Author: Masahiko Sawada
Reviewed-by: Noah Misch, Amit Kapila
Discussion: https://postgr.es/m/20220401074423.GC3682158@rfd.leadboat.comhttps://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Previously the pgstat <-> replication slots API was done with on the basis of
names. However, the upcoming move to storing stats in shared memory makes it
more convenient to use a integer as key.
Change the replication slot functions to take the slot rather than the slot
name, and expose ReplicationSlotIndex() to compute the index of an replication
slot. Special handling will be required for restarts, as the index is not
stable across restarts. For now pgstat internally still uses names.
Rename pgstat_report_replslot_{create,drop}() to
pgstat_{create,drop}_replslot() to match the functions for other kinds of
stats.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
One problematic part of the current statistics collector design is that there
is no reliable way of getting rid of statistics entries. Because of that
pgstat_vacuum_stat() (called by [auto-]vacuum) matches all stats for the
current database with the catalog contents and tries to drop now-superfluous
entries. That's quite expensive. What's worse, it doesn't work on physical
replicas, despite physical replicas collection statistics entries.
This commit introduces infrastructure to create / drop statistics entries
transactionally, together with the underlying catalog objects (functions,
relations, subscriptions). pgstat_xact.c maintains a list of stats entries
created / dropped transactionally in the current transaction. To ensure the
removal of statistics entries is durable dropped statistics entries are
included in commit / abort (and prepare) records, which also ensures that
stats entries are dropped on standbys.
Statistics entries created separately from creating the underlying catalog
object (e.g. when stats were previously lost due to an immediate restart)
are *not* WAL logged. However that can only happen outside of the transaction
creating the catalog object, so it does not lead to "leaked" statistics
entries.
For this to work, functions creating / dropping functions / relations /
subscriptions need to call into pgstat. For subscriptions this was already
done when dropping subscriptions, via pgstat_report_subscription_drop() (now
renamed to pgstat_drop_subscription()).
This commit does not actually drop stats yet, it just provides the
infrastructure. It is however a largely independent piece of infrastructure,
so committing it separately makes sense.
Bumps XLOG_PAGE_MAGIC.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
With the introduction of PgStat_Kind PgStat_Single_Reset_Type,
PgStat_Shared_Reset_Target don't make sense anymore. Replace them with
PgStat_Kind.
Instead of having dedicated reset functions for different kinds of stats, use
two generic helper routines (one to reset all stats of a kind, one to reset
one stats entry).
A number of reset functions were named pgstat_reset_*_counter(), despite
affecting multiple counters. The generic helper routines get rid of
pgstat_reset_single_counter(), pgstat_reset_subscription_counter().
Rename pgstat_reset_slru_counter(), pgstat_reset_replslot_counter() to
pgstat_reset_slru(), pgstat_reset_replslot() respectively, and have them only
deal with a single SLRU/slot. Resetting all SLRUs/slots goes through the
generic pgstat_reset_of_kind().
Previously pg_stat_reset_replication_slot() used SearchNamedReplicationSlot()
to check if a slot exists. API wise it seems better to move that to
pgstat_replslot.c.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Until now index_concurrently_swap() directly modified pgstat internal
datastructures. That will break with the introduction of shared memory
statistics and seems off architecturally.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Only the pgstat_send_* functions that are called from outside pgstat*.c are
renamed (the rest will go away). This is done separately from the - quite
large - shared memory statistics patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
The transactional integration code is largely independent from the rest of
pgstat.c. Subsequent commits will add more related code.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
It might seem pointless to allow use of dsm in single user mode, but otherwise
subsystems might need dedicated single user mode code paths.
Besides changing the assert, all that's needed is to make some windows code
assuming the presence of postmaster conditional.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
These clauses allow the user to specify how data from nested paths are
joined, allowing considerable freedom in shaping the tabular output of
JSON_TABLE.
PLAN DEFAULT allows the user to specify the global strategies when
dealing with sibling or child nested paths. The is often sufficient to
achieve the necessary goal, and is considerably simpler than the full
PLAN clause, which allows the user to specify the strategy to be used
for each named nested path.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Commits 74cf7d46 and a61daa14 fixed pg_upgrade bugs involving oversights
in how relfrozenxid or relminmxid are carried forward or initialized.
Corruption caused by bugs of this nature was ameliorated by commit
78db307bb2, which taught VACUUM to always overwrite existing invalid
relfrozenxid or relminmxid values that are apparently "in the future".
Extend that work now by showing a warning in the event of overwriting
either relfrozenxid or relminmxid due to an existing value that is "in
the future". There is probably a decent chance that the sanity checks
added by commit 699bf7d05c will raise an error before VACUUM reaches
this point, but we shouldn't rely on that.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmRZEzeGvLv8yDW0AbFmSvJjTziORqjVUrf74mL4GL0Ww@mail.gmail.com
* Move the execution pruning initialization steps that are common
between both ExecInitAppend() and ExecInitMergeAppend() into a new
function ExecInitPartitionPruning() defined in execPartition.c.
Those steps include creation of a PartitionPruneState to be used for
all instances of pruning and determining the minimal set of child
subplans that need to be initialized by performing initial pruning if
needed, and finally adjusting the subplan_map arrays in the
PartitionPruneState to reflect the new set of subplans remaining
after initial pruning if it was indeed performed.
ExecCreatePartitionPruneState() is no longer exported out of
execPartition.c and has been renamed to CreatePartitionPruneState()
as a local sub-routine of ExecInitPartitionPruning().
* Likewise, ExecFindInitialMatchingSubPlans() that was in charge of
performing initial pruning no longer needs to be exported. In fact,
since it would now have the same body as the more generally named
ExecFindMatchingSubPlans(), except differing in the value of
initial_prune passed to the common subroutine
find_matching_subplans_recurse(), it seems better to remove it and add
an initial_prune argument to ExecFindMatchingSubPlans().
* Add an ExprContext field to PartitionPruneContext to remove the
implicit assumption in the runtime pruning code that the ExprContext to
use to compute pruning expressions that need one can always rely on the
PlanState providing it. A future patch will allow runtime pruning (at
least the initial pruning steps) to be performed without the
corresponding PlanState yet having been created, so this will help.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYCpEqh2LMDOp9mT+4-QoVe8HgFMKBjntEMCTZLpcCCA@mail.gmail.com
The previous coding of dshash_seq_next(), on the first call, accessed
status->hash_table->size_log2 without holding a partition lock and without
guaranteeing that ensure_valid_bucket_pointers() had ever been called.
That oversight turns out to not have immediately visible effects, because
bucket 0 is always in partition 0, and ensure_valid_bucket_pointers() was
called after acquiring the partition lock. However,
PARTITION_FOR_BUCKET_INDEX() with a size_log2 of 0 ends up triggering formally
undefined behaviour.
Simplify by accessing partition 0, without using PARTITION_FOR_BUCKET_INDEX().
While at it, remove dshash_get_current(), there is no convincing use
case. Also polish a few comments.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Commit f4fb45d15c tried to free memory during aggregate finalization.
This cause issues, particularly when used as a window function, so stop
doing that.
Per complaint by Jaime Casanova and diagnosis by Andres Freund
Discussion: https://postgr.es/m/YkfeMNYRCGhySKyg@ahch-to
The general usage pattern when we store tuples in tuplesort.c is that
we store a series of tuples one by one then either perform a sort or spill
them to disk. In the common case, there is no pfreeing of already stored
tuples. For the common case since we do not individually pfree tuples, we
have very little need for aset.c memory allocation behavior which
maintains freelists and always rounds allocation sizes up to the next
power of 2 size.
Here we conditionally use generation.c contexts for storing tuples in
tuplesort.c when the sort will never be bounded. Unfortunately, the
memory context to store tuples is already created by the time any calls
would be made to tuplesort_set_bound(), so here we add a new sort option
that allows callers to specify if they're going to need a bounded sort or
not. We'll use a standard aset.c allocator when this sort option is not
set.
Extension authors must ensure that the TUPLESORT_ALLOWBOUNDED flag is
used when calling tuplesort_begin_* for any sorts that make a call to
tuplesort_set_bound().
Author: David Rowley
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf++8JJ0paw+03dk+W25tQEcNQ@mail.gmail.com
This replaces the bool flag for randomAccess. An upcoming patch requires
adding another option, so instead of breaking the API for that, then
breaking it again one day if we add more options, let's just break it
once. Any boolean options we add in the future will just make use of an
unused bit in the flags.
Any extensions making use of tuplesorts will need to update their code
to pass TUPLESORT_RANDOMACCESS instead of true for randomAccess.
TUPLESORT_NONE can be used for a set of empty options.
Author: David Rowley
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf%2B%2B8JJ0paw%2B03dk%2BW25tQEcNQ%40mail.gmail.com
Here we make a series of improvements to the generation memory
allocator, namely:
1. Allow generation contexts to have a minimum, initial and maximum block
sizes. The standard allocator allows this already but when the generation
context was added, it only allowed fixed-sized blocks. The problem with
fixed-sized blocks is that it's difficult to choose how large to make the
blocks. If the chosen size is too small then we'd end up with a large
number of blocks and a large number of malloc calls. If the block size is
made too large, then memory is wasted.
2. Add support for "keeper" blocks. This is a special block that is
allocated along with the context itself but is never freed. Instead,
when the last chunk in the keeper block is freed, we simply mark the block
as empty to allow new allocations to make use of it.
3. Add facility to "recycle" newly empty blocks instead of freeing them
and having to later malloc an entire new block again. We do this by
recording a single GenerationBlock which has become empty of any chunks.
When we run out of space in the current block, we check to see if there is
a "freeblock" and use that if it contains enough space for the allocation.
Author: David Rowley, Tomas Vondra
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/d987fd54-01f8-0f73-af6c-519f799a0ab8@enterprisedb.com
When dispatching sort operations to specialized variants, commit
69749243 failed to handle the case where CLUSTER-sort decides not to
initialize datum1 and isnull1. Fix by hoisting that decision up a level
and advertising whether datum1 can be relied on, in the Tuplesortstate
object.
Per reports from UBsan and Valgrind build farm animals, while running
the cluster.sql test.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAFBsxsF1TeK5Fic0M%2BTSJXzbKsY6aBqJGNj6ptURuB09ZF6k_w%40mail.gmail.com
datetime.c's parsing logic has assumed that strtod() will accept
a string that looks like ".", which it does in glibc, but not on
some less-common platforms such as AIX. The result of this was
that datetime fields like "123." would be accepted on some platforms
but not others; which is a sufficiently odd case that it's not that
surprising we've heard no field complaints. But commit e39f99046
extended that assumption to new places, and happened to add a test
case that exposed the platform dependency. Remove this dependency
by special-casing situations without any digits after the decimal
point.
(Again, this is in part a pre-existing bug but I don't feel a
compulsion to back-patch.)
Also, rearrange e39f99046's changes in formatting.c to avoid a
Coverity complaint that we were copying an uninitialized field.
Discussion: https://postgr.es/m/1592893.1648969747@sss.pgh.pa.us
Non-aggressive VACUUMs were at a gratuitous disadvantage (relative to
aggressive VACUUMs) around advancing relfrozenxid and relminmxid before
now. The issue only came up when concurrent activity unset some heap
page's visibility map bit right as VACUUM was considering if the page
should get counted in frozenskipped_pages. The non-aggressive case
would recheck the all-frozen bit at this point. The aggressive case
reasoned that the page (a skippable page) must have at least been
all-frozen in the recent past, so skipping it won't make relfrozenxid
advancement unsafe (which is never okay for aggressive VACUUMs).
The recheck created a window for some other backend to confuse matters
for VACUUM. If the page's VM bit turned out to be unset, VACUUM would
conclude that the page was _never_ all-frozen. frozenskipped_pages was
not incremented, and yet VACUUM couldn't back out of skipping at this
late stage (it couldn't choose to scan the page instead). This made it
unsafe to advance relfrozenxid later on.
Consistently avoid the issue by generalizing how we skip frozen pages
during aggressive VACUUMs: take the same approach when skipping any
skippable page range during aggressive and non-aggressive VACUUMs alike.
The new approach makes ranges (not individual pages) the fundamental
unit of skipping using the visibility map. frozenskipped_pages is
replaced with a boolean flag that represents whether some skippable
range with one or more all-visible pages was actually skipped.
It is safe for VACUUM to treat a page as all-frozen provided it at least
had its all-frozen bit set after the OldestXmin cutoff was established.
VACUUM is only required to scan pages that might have XIDs < OldestXmin
(unfrozen XIDs) to be able to safely advance relfrozenxid. Tuples
concurrently inserted on "skipped" pages can be thought of as equivalent
to tuples concurrently inserted on a block >= rel_pages.
It's possible that the issue this commit fixes hardly ever came up in
practice. But we only had to be unlucky once to lose out on advancing
relfrozenxid -- a single affected heap page was enough to throw VACUUM
off. That seems like something to avoid on general principle. This is
similar to an issue fixed by commit 44fa8488, which taught vacuumlazy.c
to not give up on non-aggressive relfrozenxid advancement just because a
cleanup lock wasn't immediately available on some heap page.
Skipping an all-visible range is now explicitly structured as a choice
made by non-aggressive VACUUMs, by weighing known costs (scanning extra
skippable pages to freeze their tuples early) against known benefits
(advancing relfrozenxid early). This works in essentially the same way
as it always has (don't skip ranges < SKIP_PAGES_THRESHOLD). We could
do much better here in the future by considering other relevant factors.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzn6bGJGfOy3zSTJicKLw99PHJeSOQBOViKjSCinaxUKDQ@mail.gmail.com
Discussion: https://postgr.es/m/CA%2BTgmoZiSOY6H7aadw5ZZGm7zYmfDzL6nwmL5V7GL4HgJgLF_w%40mail.gmail.com
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
Move some of the heap_vacuum_rel() instrumentation related variables to
the scope where they're actually needed. Also reorder some of the
variable declarations at the start of heap_vacuum_rel() so that related
variables appear together.
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
Previously, the specialized tuplesort routine inlined handling for
reverse-sort and NULLs-ordering but called the datum comparator via a
pointer in the SortSupport struct parameter. Testing has showed that we
can get a useful performance gain by specializing datum comparison for
the different representations of abbreviated keys -- signed and unsigned
64-bit integers and signed 32-bit integers. Almost all abbreviatable data
types will benefit -- the only exception for now is numeric, since the
datum comparison is more complex. The performance gain depends on data
type and input distribution, but often falls in the range of 10-20% faster.
Thomas Munro
Reviewed by Peter Geoghegan, review and performance testing by me
Discussion:
https://www.postgresql.org/message-id/CA%2BhUKGKKYttZZk-JMRQSVak%3DCXSJ5fiwtirFf%3Dn%3DPAbumvn1Ww%40mail.gmail.com
This makes the code more consistent with SpGiST, GiST and GIN, that
already use this style, and the idea is to make easier the introduction
of more sanity checks for each of these AM-specific macros. BRIN uses a
different set of macros to get a page's type and flags, so it has no
need for something similar.
Author: Matthias van de Meent
Discussion: https://postgr.es/m/CAEze2WjE3+tGO9Fs9+iZMU+z6mMZKo54W1Zt98WKqbEUHbHOBg@mail.gmail.com
This patch is extracted from a larger patch that allowed setting the
default returned value from these functions to json or jsonb. That had
problems, but this piece of it is fine. For these functions only json or
jsonb can be specified in the RETURNING clause.
Extracted from an original patch from Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
postgres_fdw would push ORDER BY clauses to the remote side without
verifying that the sort operator is safe to ship. Moreover, it failed
to print a suitable USING clause if the sort operator isn't default
for the sort expression's type. The net result of this is that the
remote sort might not have anywhere near the semantics we expect,
which'd be disastrous for locally-performed merge joins in particular.
We addressed similar issues in the context of ORDER BY within an
aggregate function call in commit 7012b132d, but failed to notice
that query-level ORDER BY was broken. Thus, much of the necessary
logic already existed, but it requires refactoring to be usable
in both cases.
Back-patch to all supported branches. In HEAD only, remove the
core code's copy of find_em_expr_for_rel, which is no longer used
and really should never have been pushed into equivclass.c in the
first place.
Ronan Dunklau, per report from David Rowley;
reviews by David Rowley, Ranier Vilela, and myself
Discussion: https://postgr.es/m/CAApHDvr4OeC2DBVY--zVP83-K=bYrTD7F8SZDhN4g+pj2f2S-A@mail.gmail.com
When we create or alter a subscription to add publications raise a warning
for non-existent publications. We don't want to give an error here because
it is possible that users can later create the missing publications.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy, Japin Li, Dilip Kumar, Euler Taveira, Ashutosh Sharma, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm0f4YujGW+q-Di0CbZpnQKFFrXntikaQQKuEmGG0=Zw=Q@mail.gmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON() (incorrectly mentioned in my commit message for f4fb45d15c)
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values, and
has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value, including
json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis or
represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
COPY FROM supports the HEADER option to silently discard the header
line from a CSV or text file. It is possible to load by mistake a
file that matches the expected format, for example, if two text
columns have been swapped, resulting in garbage in the database.
This adds a new option value HEADER MATCH that checks the column names
in the header line against the actual column names and errors out if
they do not match.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
The current logical replication behavior is to send every transaction to
subscriber even if the transaction is empty. This can happen because
transaction doesn't contain changes from the selected publications or all
the changes got filtered. It is a waste of CPU cycles and network
bandwidth to build/transmit these empty transactions.
This patch addresses the above problem by postponing the BEGIN message
until the first change is sent. While processing a COMMIT message, if
there was no other change for that transaction, do not send the COMMIT
message. This allows us to skip sending BEGIN/COMMIT messages for empty
transactions.
When skipping empty transactions in synchronous replication mode, we send
a keepalive message to avoid delaying such transactions.
Author: Ajin Cherian, Hou Zhijie, Euler Taveira
Reviewed-by: Peter Smith, Takamichi Osumi, Shi Yu, Masahiko Sawada, Greg Nancarrow, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAMkU=1yohp9-dv48FLoSPrMqYEyyS5ZWkaZGD41RJr10xiNo_Q@mail.gmail.com
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
This view is similar to pg_hba_file_rules view, except that it is
associated with the parsing of pg_ident.conf. Similarly to its cousin,
this view is useful to check via SQL if changes planned in pg_ident.conf
would work upon reload or restart, or to diagnose a previous failure.
Bumps catalog version.
Author: Julien Rouhaud
Reviewed-by: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
This patch intrdocuces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON as well as on the json and
jsonb types. Each test has an IS and IS NOT variant. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
IS JSON WITH | WITHOUT UNIQUE KEYS
These are mostly self-explanatory, but note that IS JSON WITHOUT UNIQUE
KEYS is true whenever IS JSON is true, and IS JSON WITH UNIQUE KEYS is
true whenever IS JSON is true except it IS JSON OBJECT is true and there
are duplicate keys (which is never the case when applied to jsonb values).
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Generally if a role is granted membership to another role with NOINHERIT
they must use SET ROLE to access the privileges of that role, however
with predefined roles the membership and privilege is conflated. Fix that
by replacing is_member_of_role with has_privs_for_role for predefined
roles. Patch does not remove is_member_of_role from acl.h, but it does
add a warning not to use that function for privilege checking. Not
backpatched based on hackers list discussion.
Author: Joshua Brindle
Reviewed-by: Stephen Frost, Nathan Bossart, Joe Conway
Discussion: https://postgr.es/m/flat/CAGB+Vh4Zv_TvKt2tv3QNS6tUM_F_9icmuj0zjywwcgVi4PAhFA@mail.gmail.com
Commit f9fd176461 effectively gave
every role ADMIN OPTION on itself. However, this appears to be
something that happened accidentally as a result of refactoring
work rather than an intentional decision. Almost a decade later,
it was discovered that this was a security vulnerability. As a
result, commit fea164a72a restricted
this implicit ADMIN OPTION privilege to be exercisable only when
the role being administered is the same as the session user and
when no security-restricted operation is in progress. That
commit also documented the existence of this implicit privilege
for what seems to be the first time.
The effect of the privilege is to allow a login role to grant
the privileges of that role, and optionally ADMIN OPTION on it,
to some other role. That's an unusual thing to do, because generally
membership is granted in roles used as groups, rather than roles
used as users. Therefore, it does not seem likely that removing
the privilege will break things for many PostgreSQL users.
However, it will make it easier to reason about the permissions
system. This is the only case where a user who has not been given any
special permission (superuser, or ADMIN OPTION on some role) can
modify role membership, so removing it makes things more consistent.
For example, if a superuser sets up role A and B and grants A to B
but no other privileges to anyone, she can now be sure that no one
else will be able to revoke that grant. Without this change, that
would have been true only if A was a non-login role.
Patch by me. Reviewed by Tom Lane and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmoawdt03kbA+dNyBcNWJpRxu0f4X=69Y3+DkXXZqmwMDLg@mail.gmail.com
When we try to set the zstd compression level either on the client
or on the server, check for errors.
For any algorithm, on the client side, don't try to set the compression
level unless the user specified one. This was visibly broken for
zstd, which managed to set -1 rather than 0 in this case, but tidy
up the code for the other methods, too.
On the client side, if we fail to create a ZSTD_CCtx, exit after
reporting the error. Otherwise we'll dereference a null pointer.
Patch by me, reviewed by Dipesh Pandit.
Discussion: http://postgr.es/m/CA+TgmoZK3zLQUCGi1h4XZw4jHiAWtcACc+GsdJR1_Mc19jUjXA@mail.gmail.com
This has no in-core callers but will be wanted by extensions.
It's just a thin wrapper around get_query_def, so it adds little code.
Also, fix get_from_clause_item() to force insertion of an alias
for a SUBQUERY RTE item. This is irrelevant to existing uses because
RTE_SUBQUERY items made by the parser always have aliases already.
However, if one tried to use pg_get_querydef() to inspect a post-rewrite
Query, it could be an issue. In any case, get_from_clause_item already
contained logic to force alias insertion for VALUES items, so the lack
of the same for SUBQUERY is a pretty clear oversight.
In passing, replace duplicated code for selection of pretty-print
options with a common macro.
Julien Rouhaud, reviewed by Pavel Stehule, Gilles Darold, and myself
Discussion: https://postgr.es/m/20210627041138.zklczwmu3ms4ufnk@nol
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
Per ECMAScript standard (ECMA-262, referenced by SQL standard), the
syntax forms
.1
1.
should be allowed for decimal numeric literals, but the existing
implementation rejected them.
Also, by the same standard, reject trailing junk after numeric
literals.
Note that the ECMAScript standard for numeric literals is in respects
like these slightly different from the JSON standard, which might be
the original cause for this discrepancy.
A change is that this kind of syntax is now rejected:
1.type()
This needs to be written as
(1).type()
This is correct; normal JavaScript also does not accept this syntax.
We also need to fix up the jsonpath output function for this case. We
put parentheses around numeric items if they are followed by another
path item.
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/50a828cc-0a00-7791-7883-2ed06dfb2dbb@enterprisedb.com
So far the first of the retries introduced in f28bf667f6 resolves the
issue. But I (Andres) am still suspicious that the start of the failures might
indicate a problem.
To reduce noise, stop reporting a failure if a retry resolves the problem. To
allow figuring out what causes the slow slot drop, add a few more debug
messages to ReplicationSlotDropPtr.
See also commit afdeff1052, fe0972ee5e and f28bf667f6.
Discussion: https://postgr.es/m/20220327213219.smdvfkq2fl74flow@alap3.anarazel.de
This patch introduces the SQL/JSON standard constructors for JSON:
JSON()
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
For the most part these functions provide facilities that mimic
existing json/jsonb functions. However, they also offer some useful
additional functionality. In addition to text input, the JSON() function
accepts bytea input, which it will decode and constuct a json value from.
The other functions provide useful options for handling duplicate keys
and null values.
This series of patches will be followed by a consolidated documentation
patch.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
This introduces some of the building blocks used by the SQL/JSON
constructor and query functions. Specifically, it provides node
executor and grammar support for the FORMAT JSON [ENCODING foo]
clause, and values decorated with it, and for the RETURNING clause.
The following SQL/JSON patches will leverage these.
Nikita Glukhov (who probably deserves an award for perseverance).
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
flatten_join_alias_vars_mutator counted attnums, but didn't
do anything with the count (no doubt it did at one time).
Noted by buildfarm member seawasp.
Commit 8c6d30f21 caused this function to fail to set *displen
in the PS_USE_NONE code path. If the variable's previous value
had been negative, that'd lead to a memory clobber at some call
sites. We'd managed not to notice due to very thin test coverage
of such configurations, but this appears to explain buildfarm member
lorikeet's recent struggles.
Credit to Andrew Dunstan for spotting the problem. Back-patch
to v13 where the bug was introduced.
Discussion: https://postgr.es/m/136102.1648320427@sss.pgh.pa.us
A fair percentage of the buildfarm doesn't recognize that oldcxt
won't be used uninitialized; silence those warnings by initializing it.
While here, upgrade the function's thoroughly inadequate header comment.
Oversight in 923def9a5, per buildfarm.
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
Commit 75b1521dae added support for logical replication of sequences,
including grammar changes, but it did not update preprocess_pubobj_list
accordingly. This can cause segfaults with "continuations", i.e. when
command specifies a list of objects:
CREATE PUBLICATION p FOR SEQUENCE s1, s2;
Reported by Amit Kapila, patch by me.
Reported-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1JxDNKGBSNTyN-Xj2JRjzFo+ziSqJbjH==vuO0YF_CQrg@mail.gmail.com
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf6, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
These were introduced in recent commit 52e4f0cd47. We were trying to free
some transient space consumption and that too was not entirely correct and
complete. We don't need this partial freeing of memory as it will be
allocated just once for a query and will be freed at the end of the query.
Author: Zhihong Yu
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALNJ-vQORfQ=vicbKA_RmeGZGzm1y3WsEcZqXWi7qjN43Cz_vg@mail.gmail.com
A TOAST table can normally have only one index, but there are corner
cases where it has more; for example, transiently during REINDEX
CONCURRENTLY. In such a case, the pg_statio_all_tables view produced
multiple rows for the owning table, one per TOAST index. Refactor the
view to avoid that, instead summing the stats across all the indexes,
as we do for regular table indexes.
While this has been wrong for a long time, back-patching seems unwise
due to the difficulty of putting a system view change into back
branches.
Andrei Zubkov, tweaked a bit by me
Discussion: https://postgr.es/m/acefef4189706971fc475f912c1afdab1c48d627.camel@moonset.ru
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Peter Geoghegan
David Rowley
Alvaro Herrera
Tomas Vondra
Peter Eisentraut
Daniel Gustafsson
Thomas Munro
Jeff Davis
Andres Freund
Michael Paquier
Amit Kapila
Tom Lane
Stephen Frost
Etsuro Fujita
Andrew Dunstan
Joe Conway
John Naylor
Robert Haas