for "aclitem" so that it is not an opaque datatype.
I needed these functions to browse aclitems from user land. I can load
them when necessary, but it seems to me that these accessors for a
backend type belong to the backend, so I submit them.
Fabien Coelho
-D_REENTRANT -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS
for all ports. It can't hurt if they are not supported, but it makes
our job easier for porting.
Should fix Darwin compile and other platforms without mucking with the
thread detection code.
Regression tests and documentation have both been updated.
SQL2003 requires that both ceiling() and ceil() be present, so I have
documented both spellings. SQL2003 doesn't mention pow() as far as I
can see, so I decided to replace pow() with power() in the documentation:
there is little reason to encourage the continued usage of a function
that isn't compliant with the standard, given a standard-compliant
alternative.
RELEASE NOTES: should state that pow() is considered deprecated
(although I don't see the need to ever remove it.)
Allow additional thread flags to be added via port templates.
Change thread flag names to PTHREAD_CFLAGS and PTHREAD_LIBS to match new
configure script.
errors. This is the second submission, which integrates Tom comments about
localisation and exit code. I also added some comments about one sql
command which is not ignored.
Fabien COELHO
the next are handled by ReleaseAndReadBuffer rather than separate
ReleaseBuffer and ReadBuffer calls. This cuts the number of acquisitions
of the BufMgrLock by a factor of 2 (possibly more, if an indexscan happens
to pull successive rows from the same heap page). Unfortunately this
doesn't seem enough to get us out of the recently discussed context-switch
storm problem, but it's surely worth doing anyway.
of whether we have successfully read data into a buffer; this makes the
error behavior a bit more transparent (IMHO anyway), and also makes it
work correctly for local buffers which don't use Start/TerminateBufferIO.
Collapse three separate functions for writing a shared buffer into one.
This overlaps a bit with cleanups that Neil proposed awhile back, but
seems not to have committed yet.
of VACUUM cases so that VACUUM requests don't affect the ARC state at all,
avoid corner case where BufferSync would uselessly rewrite a buffer that
no longer contains the page that was to be flushed. Make some minor
other cleanups in and around the bufmgr as well, such as moving PinBuffer
and UnpinBuffer into bufmgr.c where they really belong.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
o -Allow dump/load of CSV format
This adds new keywords to COPY and \copy:
CSV - enable CSV mode (comma separated variable)
QUOTE - specify quote character
ESCAPE - specify escape character
FORCE - force quoting of specified column
LITERAL - suppress null comparison for columns
Doc changes included. Regression updates coming from Andrew.
are sought first as local FROM columns, then as local SELECT-list aliases,
and finally as outer FROM columns; the former behavior made outer FROM
columns take precedence over aliases. This does not change spec
conformance because SQL99 allows only the first case anyway, and it seems
more useful and self-consistent. Per gripe from Dennis Bjorklund 2004-04-05.
It works on the principle of turning sockets into non-blocking, and then
emulate blocking behaviour on top of that, while allowing signals to
run. Signals are now implemented using an event instead of APCs, thus
getting rid of the issue of APCs not being compatible with "old style"
sockets functions.
It also moves the win32 specific code away from pqsignal.h/c into
port/win32, and also removes the "thread style workaround" of the APC
issue previously in place.
In order to make things work, a few things are also changed in pgstat.c:
1) There is now a separate pipe to the collector and the bufferer. This
is required because the pipe will otherwise only be signalled in one of
the processes when the postmaster goes down. The MS winsock code for
select() must have some kind of workaround for this behaviour, but I
have found no stable way of doing that. You really are not supposed to
use the same socket from more than one process (unless you use
WSADuplicateSocket(), in which case the docs specifically say that only
one will be flagged).
2) The check for "postmaster death" is moved into a separate select()
call after the main loop. The previous behaviour select():ed on the
postmaster pipe, while later explicitly saying "we do NOT check for
postmaster exit inside the loop".
The issue was that the code relies on the same select() call seeing both
the postmaster pipe *and* the pgstat pipe go away. This does not always
happen, and it appears that useing WSAEventSelect() makes it even more
common that it does not.
Since it's only called when the process exits, I don't think using a
separate select() call will have any significant impact on how the stats
collector works.
Magnus Hagander
"millennium" date part implementation in postgresql, both in the code
and the documentation, so that it conforms to the official definition.
If you do not agree with the official definition, please send your
complaint to "pope@vatican.org". I'm not responsible for them;-)
With the previous version, the centuries and millenniums had a wrong
number and started the wrong year. Moreover century number 0, which does
not exist in reality, lasted 200 years. Also, millennium number 0 lasted
2000 years.
If you want postgresql to have it's own definition of "century" and
"millennium" that does not conform to the one of the society, just give
them another name. I would suggest "pgCENTURY" and "pgMILLENNIUM";-)
IMO, if someone may use the options, it means that postgresql is used for
historical data, so it make sense to have an historical definition. Also,
I just want to divide the year by 100 or 1000, I can do that quite easily.
BACKWARD INCOMPATIBLE CHANGE
Fabien Coelho - coelho@cri.ensmp.fr
by the set operation, so that redundant sorts at higher levels can be
avoided. This was foreseen a good while back, but not done. Per request
from Karel Zak.
> >>with allowed values of "all, mod, ddl, none" with default "none".
OK, here is a patch that implements #1. Here is sample output:
test=> set client_min_messages = 'log';
SET
test=> set log_statement = 'mod';
SET
test=> select 1;
?column?
----------
1
(1 row)
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> update test set x=1;
LOG: statement: update test set x=1;
ERROR: relation "test" does not exist
test=> copy test from '/tmp/x';
LOG: statement: copy test from '/tmp/x';
ERROR: relation "test" does not exist
test=> copy test to '/tmp/x';
ERROR: relation "test" does not exist
test=> prepare xx as select 1;
PREPARE
test=> prepare xx as update x set y=1;
LOG: statement: prepare xx as update x set y=1;
ERROR: relation "x" does not exist
test=> explain analyze select 1;;
QUERY PLAN
------------------------------------------------------------------------------------
Result (cost=0.00..0.01 rows=1 width=0) (actual time=0.006..0.007 rows=1 loops=1)
Total runtime: 0.046 ms
(2 rows)
test=> explain analyze update test set x=1;
LOG: statement: explain analyze update test set x=1;
ERROR: relation "test" does not exist
test=> explain update test set x=1;
ERROR: relation "test" does not exist
It checks PREPARE and EXECUTE ANALYZE too. The log_statement values are
'none', 'mod', 'ddl', and 'all'. For 'all', it prints before the query
is parsed, and for ddl/mod, it does it right after parsing using the
node tag (or command tag for CREATE/ALTER/DROP), so any non-parse errors
will print after the log line.
That particular corner case is not exactly compelling, but given 7.4's
ability to discard redundant join clauses, it is possible for the situation
to arise from queries that are not so obviously silly. Per bug report
of 6-Apr-04.
the COPY NULL string:
test=> copy pg_language to '/tmp/x' with delimiter '|';
COPY
test=> copy pg_language to '/tmp/x' with delimiter '|' null '|x';
ERROR: COPY delimiter must not appear in the NULL specification
test=> copy pg_language from '/tmp/x' with delimiter '|' null '|x';
ERROR: COPY delimiter must not appear in the NULL specification
It also throws an error if it conflicts with the default NULL string:
test=> copy pg_language to '/tmp/x' with delimiter '\\';
ERROR: COPY delimiter must not appear in the NULL specification
test=> copy pg_language to '/tmp/x' with delimiter '\\' NULL 'x';
COPY
'SELECT foo()' in a SQL function returning a rowtype, to simply pass
back the results of another function returning the same rowtype.
However, that hasn't actually worked in many years. Now it works again.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
boxes. Change interface to user-defined GiST support methods union and
picksplit. Now instead of bytea struct it used special GistEntryVector
structure.
same path keys and nearly equivalent costs will be considered redundant.
The exact nature of the fuzziness may get adjusted later based on current
discussions, but no one has shot a hole in the basic idea yet ...
only stable and not immutable, pred_test_simple_clause has to guard
against making invalid deductions. Add a test for immutability of
the selected test_op.
a whole row or record variable into a SQL function. Eventually this case
should be made to actually work, but for now this is better than what it
did before.
is measured in kilobytes and checked against actual physical execution
stack depth, as per my proposal of 30-Dec. This gives us a fairly
bulletproof defense against crashing due to runaway recursive functions.
>>equivalent to "-h localhost", shouldn't it?
>>
>>
>
>Now that is something I had not thought of. Seems we can assume a Win32
>psql can never use unix domain sockets, so defaulting that to localhost
>is a good solution too.
Andrew Dunstan
WITH/WITHOUT OIDS in dump files. This makes dump files more portable.
I have updated the pg_dump version so old binary dumps will load fine.
Pre-7.5 dumps use WITHOUT OIDS in SQL were needed, so they should be
fine.
in s_lock.c were not updated, and still refers to select. Made my grep
hit the wrong files, so I figured a simple patch was in order.. (other
refs in the same comment block was changed..)
Magnus Hagander
remove separate implementation of ALTER TABLE SET WITHOUT OIDS in favor
of doing a regular DROP. Also, cause CREATE TABLE to account completely
correctly for the inheritance status of the OID column. This fixes
problems with dropping OID columns that have dependencies, as noted by
Christopher Kings-Lynne, as well as making sure that you can't drop an
OID column that was inherited from a parent.
listen_addresses parameter, as per recent discussion. The default behavior
is now to listen on localhost, which eliminates the need for the -i
postmaster switch in many scenarios.
Andrew Dunstan
in one query, rather than making a separate query for each object that
could have a comment. This costs relatively little space (a few tens of
K typically) and saves substantial time in databases with many objects.
I find it reduces the runtime of 'pg_dump -s regression' by about a
third.
is done at creation time for plpgsql functions. Improve createlang and
droplang to support adding/dropping validators for PLs. Initial steps
towards producing a syntax error position from plpgsql syntax errors
(this part is a work in progress, and will change depending on outcome
of current discussions).
of fighting it, avoid hard-wired (and wrong) assumption about max length
of prefix, cause %l to actually work as documented, don't compute data
we may not need.
Compare fsync before and after write's close:
Compare one o_sync write to two:
Compare file sync methods with one 8k write:
Compare file sync methods with 2 8k writes:
TID (heap position). This doesn't do anything to the validity of the
finished index, but by pretending to qsort() that there are no really
equal keys in the sort, we can avoid performance problems with qsort
implementations that have trouble with large numbers of equal keys.
Patch from Manfred Koizar.
so that the 'val' is computed only once, per recent discussion. The
speedup is not much when 'val' is just a simple variable, but could be
significant for larger expressions. More importantly this avoids issues
with multiple evaluations of a volatile 'val', and it allows the CASE
expression to be reverse-listed in its original form by ruleutils.c.
directly to the appropriate per-node execution function, using a function
pointer stored by ExecInitExpr. This speeds things up by eliminating one
level of function call. The function-pointer technique also enables further
small improvements such as only making one-time tests once (and then
changing the function pointer). Overall this seems to gain about 10%
on evaluation of simple expressions, which isn't earthshaking but seems
a worthwhile gain for a relatively small hack. Per recent discussion
on pghackers.
i've attached this again.
Additionally I include a small patch to remove mutex locking when a
DEFAULT/NULL connection is being retrieved. This is consistent with
libpq.
Lee Kindness
that by querying the environment explicitly first for LC_COLLATE and
LC_CTYPE. We have to do this because initdb passes those values in the
environment. If there is nothing there we fall back on the codepage.
Andrew Dunstan
implemented casts to varchar and bpchar using a cast-to-text function.
This is a holdover from before we had pg_cast; it now makes more sense
to just list these casts in pg_cast. While at it, add pg_cast entries
for the other direction (casts from varchar/bpchar) where feasible.
> possibly should look there too.)
[snip]
>
I think I have the fix for part of it, but this remains...
gcc -O2 -fno-strict-aliasing -Wall -Wmissing-prototypes
-Wmissing-declarations -fPIC -I. -I../../../src/include
-D_POSIX_PTHREAD_SEMANTICS -DFRONTEND
-DSYSCONFDIR='"/usr/local/pgsql/etc"' -c -o thread.o thread.c
thread.c: In function `pqGethostbyname':
thread.c:189: error: `resbuf' undeclared (first use in this
function)
Looking at src/port/thread.c, line 189, it looks like somebody typo'd.
Looks like that second parameter should be "resultbuf", not "resbuf"?
Jim Seymour
In particular, don't depend on strtod() to accept 'NaN' and 'Infinity'
inputs (while this is required by C99, not all platforms are compliant
with that yet). Also, don't require glibc's behavior from isinf():
it seems that on a lot of platforms isinf() does not itself distinguish
between negative and positive infinity.
discussions. Patch by Fabien Coelho and Tom Lane. Still needs to be
taught about multi-screen-column kanji characters; Tatsuo has promised
to provide the needed infrastructure for that.
message that is reporting a prechecking error in a SQL function.
This is to cue client-side code that the syntax error position,
if any, is with respect to the function body and not the outer command.
incompatible enough to prevent indexscanning the referenced table. Also,
improve the error message that pops out when we can't implement the FK at
all for lack of a usable equality operator. Fabien Coelho, with some review
by Tom Lane.
7.4 rewrite for hashed aggregate support. If the transition data type
is pass-by-reference, the transValue must be pfreed when starting a new
group boundary, else we have a one-value-per-group leakage. Thanks to
Rae Steining for providing a reproducible test case.
[ Note: int8-exp-three-digits.out needs the same treatment]
Will review recent changes for float4/8 and implications for win32 when
I get a chance.
Claudio Natoli
types. Update the regression tests and the documentation to reflect
this. Remove the UNSAFE_FLOATS #ifdef.
This is only half the story: we still unconditionally reject
floating point operations that result in +/- infinity. See
recent thread on -hackers for more information.
any amount of leading or trailing whitespace (where "whitespace"
is defined by isspace()). This is for SQL conformance, as well
as consistency with other numeric types (e.g. oid, numeric).
Also refactor pg_atoi() to avoid looking at errno where not
necessary, and add a bunch of regression tests for the input
to these types.
initialization of stats process under EXEC_BACKEND.
[A cleaner, rationalized approach to stat/backend/SSDataBase child
processes under EXEC_BACKEND is on my TODO list. However this patch
takes care of immediate concerns (ie. stats test now passes under
win32)]
Claudio Natoli
bin directories to be packaged under the same root directory (eg. <some
path>/pgsql/bin and <some path>/pgsql/lib) for the win32 port, which
does not appear to be an onerous restriction.
Claudio Natoli
Currently, src/interfaces/libpq/win32.mak builds a statically-linked
library "libpq.lib", a debug dll "libpq.dll", import library for the
debug dll "libpqdll.lib", a release dll "libpq.dll", import library for
the release dll "libpqdll.lib". To avoid naming clashes, I would make
the debug dll and import libraries "libpqd.dll" and "libpqddll.lib".
Basically, the debug build uses the cl flags: "/MDd /D _DEBUG", and the
release build uses the cl flags "/MD /D NDEBUG". Usually the debug
build has a "D" suffix on the file name, so for example:
libpqd.dll libpq, debug build
libpqd.lib libpq, debug build, import library
libpq.dll libpq, release build
libpq.lib libpq, release build, import library
David Turner
#log_line_prefix = '' # e.g. '<%u%%%d> '
# %u=user name %d=database name
# %r=remote host and port
# %p=PID %t=timestamp %i=command tag
# %c=session id %l=session line number
# %s=session start timestamp
# %x=stop here in non-session processes
# %%='%'
Andrew Dunstan
predicate of the form 'foo IS NOT NULL' is implied by a WHERE clause
that uses 'foo' in any strict operator or function. Per suggestion
and preliminary implementation by John Siracusa; some further hacking
by moi.
support for 'week' within the date_trunc function.
Within the patch I added a couple of test cases and associated target
output, and changed the documentation to add 'week' appropriately.
Robert Creager
* Mostly, casting etc to remove compilation warnings in win32 only code.
* main.c: set _IONBF to stdout/stderr under win32 (under win32, _IOLBF
defaults to full buffering)
* pg_resetxlog/Makefile: ensures dirmod.o gets cleaned (got bitten by
this when, after "make clean"ing, switching compilation between Ming +
Cygwin)
Claudio Natoli
+extern Oid SPI_getargtypeid(void *plan, int argIndex);
+extern int SPI_getargcount(void *plan);
+extern bool SPI_is_cursor_plan(void *plan);
Thomas Hallgren
float8 types. This begins the deprecation of this feature: in 7.6,
this input will be rejected.
Also added a new error code for warnings about deprecated features,
and updated the regression tests.
object types, rather than by OID. This should help ensure consistent
dump output from databases that are logically the same but have different
histories, per recent discussion about 'diffing' databases. The patch
is bulky because of renaming of fields, but not very complicated.
Also, do some tweaking to cause BLOB restoration to be done in a better
order, and clean up pg_restore's textual output to exactly match pg_dump.
which are munged by sed, such as:
/e/cygwin/opt/diff9c/pgsql/src/test/regress/data/agg.data to be
correctly passed as:
e:/cygwin/opt/diff9c/pgsql/src/test/regress/data/agg.data
FWIW, "fixes" a large (> 20) tests under Win32.
Claudio Natoli
equivalent sort expressions to use was broken: you can't just look
at the relation membership, you have to actually grovel over the
individual Vars in each expression. I think this did work when it
was written, but it was broken by subsequent optimizations that made
join relations not propagate every single input variable upward.
Must find the Var that got propagated, not choose one at random.
Per bug report from Daniel O'Neill.
Bruce Momjian
Michael Meskes
Dennis Bjorklund
Neil Conway
Tom Lane
PostgreSQL Daemon
Peter Eisentraut
Teodor Sigaev
Tatsuo Ishii