before commit, not after :-( --- the original coding is not only unsafe
if an error occurs while it's processing, but it generates an invalid
sequence of WAL entries. Resurrect 7.2 logic for deleting items when
no longer needed. Use an enum instead of random macros. Editorialize
on names used for routines and constants. Teach backend/nodes routines
about new field in CreateTable struct. Add a regression test.
PL/PgSQL. Previously, it had been bundled together with the assign
statement implementation, for some reason that wasn't clear to me
(they certainly don't share any code with one another). So I separated
them and made PERFORM a statement like any other. No changes in
functionality.
Along the way, I added some regression tests for PERFORM, added a
bunch more SGML tags to the PL/PgSQL docs, and removed an obsolete
comment relating to the implementation of RETURN NEXT.
Neil Conway
"traditional" behavior, so the change should be transparent. Use the
command "\pset pager always" to turn it on. Anything else does the
normal toggle between "on" and "off"
Greg Sabino Mullane
precision for float4, float8, and geometric types. Set it in pg_dump
so that float data can be dumped/reloaded exactly (at least on platforms
where the float I/O support is properly implemented). Initial patch by
Pedro Ferreira, some additional work by Tom Lane.
the documentation and behavior of "pg_result $res -oid" when $res is not
from an INSERT. The documentation says it should return an empty
string, but in fact it returns 0. I think it used to return an empty
string around PostgreSQL-7.1.3 when PQoidStatus() was used, but now it
uses PQoidValue() which returns InvalidOid, 0 in this case.
Assuming the current behavior is desired, here is a patch to the
documentation doc/src/sgml/libpgtcl.sgml to match what really happens:
ljb
where it's safe to do database access. Along the way, fix core dump
for 'DEFAULT' parameters to CREATE DATABASE. initdb forced due to
change in pg_proc entry.
rather than being reordered according to INSTEAD attribute for
implementation convenience.
Also, increase compiled-in recursion depth limit from 10 to 100 rewrite
cycles. 10 seems pretty marginal for situations where multiple rules
exist for the same query. There was a complaint about this recently,
so I'm going to bump it up. (Perhaps we should make the limit a GUC
parameter, but that's too close to being a new feature to do in beta.)
a column list. Bring its parsing of quoted names and quoted strings
somewhat up to speed --- I believe it now handles all non-error cases
the same way the backend would, but weird boundary conditions are not
necessarily done the same way.
- Wrap them in the <database class="table"> tags, since thats what they
are (no markup rules for this, so it inherits from parent -- no style
change)
- Mention that pg_database, pg_shadow, and pg_group are global, and the
rest are local to the specific DB. (I believe this is correct).
> Works for me, though I suppose we could explain what the exceptions are
> like in general terms. Perhaps something like
>
> 'Most system catalogs are copied from the template database during
> database creation, and are thereafter database-specific. A few
> catalogs are physically shared across all databases in an installation;
> these are marked in the descriptions of the individual catalogs.'
Ok, new patch.
Rod Taylor
discussion some weeks ago. Also, add a check that two types to be
binary-equivalenced match as to typlen, typbyval, and typalign; if
they don't then it's surely a mistake to equivalence them.
be able to do that, but the ability seems to have got lost in the
shuffle). Add a -o nextOID switch for completeness. Improve the
documentation to explain how and why to use these switches.
The error message said so :-)
In 25.3. Using PL/Python
If the trigger "when" is BEFORE, you may return None or "OK"
from the Python function to indicate the tuple is unmodified, "SKIP"
to abort the event, or "MODIFIED" to indicate you've modified the tuple.
should read
If the trigger "when" is BEFORE, you may return None or "OK"
from the Python function to indicate the tuple is unmodified, "SKIP"
to abort the event, or "MODIFY" to indicate you've modified the tuple.
elein
the SQL99 standard. (I'm not sure that the character-class features are
quite right, but that can be fixed later.) Document SQL99 and POSIX
regexps as being different features; provide variants of SUBSTRING for
each.
with OPAQUE. CREATE LANGUAGE, CREATE TRIGGER, and CREATE TYPE will all
accept references to functions declared with OPAQUE --- but they will
issue a NOTICE, and will modify the function entries in pg_proc to have
the preferred type-safe argument or result types instead of OPAQUE.
Per recent pghackers discussions.
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
> Hannu Krosing wrote:
>
>> It seems that my last mail on this did not get through to the list
>> ;(
>>
>> Please consider renaming the new builtin function
>> split(text,text,int)
>>
>> to something else, perhaps
>>
>> split_part(text,text,int)
>>
>> (like date_part)
>>
>> The reason for this request is that 3 most popular scripting
>> languages (perl, python, php) all have also a function with similar
>> signature, but returning an array instead of single element and the
>> (optional) third argument is limit (maximum number of splits to
>> perform)
>>
>> I think that it would be good to have similar function in (some
>> future release of) postgres, but if we now let in a function with
>> same name and arguments but returning a single string instead an
>> array of them, then we will need to invent a new and not so easy to
>> recognise name for the "real" split function.
>>
>
> This is a good point, and I'm not opposed to changing the name, but
> it is too bad your original email didn't get through before beta1 was
> rolled. The change would now require an initdb, which I know we were
> trying to avoid once beta started (although we could change it
> without *requiring* an initdb I suppose).
>
> I guess if we do end up needing an initdb for other reasons, we
> should make this change too. Any other opinions? Is split_part an
> acceptable name?
>
> Also, if we add a todo to produce a "real" split function that
> returns an array, similar to those languages, I'll take it for 7.4.
No one commented on the choice of name, so the attached patch changes
the name of split(text,text,int) to split_part(text,text,int) per
Hannu's recommendation above. This can be applied without an initdb if
current beta testers are advised to run:
update pg_proc set proname = 'split_part' where proname = 'split';
in the case they want to use this function. Regression and doc fix is
also included in the patch.
Joe Conway
creation to world, but disallow temp table creation in template1. Per
latest round of pghackers discussion.
I did not force initdb, but the permissions lockdown on template1 will
not take effect unless you do one (or manually REVOKE TEMP ON DATABASE template1 FROM public).
Gerhard Hintermayer, revised and documented by Tom Lane.
This patch also fixes a 'must fix' bug: libpgtcl's LISTEN/NOTIFY
support was broken by the recent changes to the PGnotify structure.
Guess that change wasn't quite so safe as we thought.
not synonymous with CHECK (xxx IS NOT NULL) -- for example, consider
ALTER TABLE ADD PRIMARY KEY, which checks for 'NOT NULL', not a check
constraint.
Neil Conway
already fixed by You. However there were a few left and attached patch
should fix the rest of them.
I used StringInfo only in 2 places and both of them are inside debug
ifdefs. Only performance penalty will come from using strlen() like all
the other code does.
I also modified some of the already patched parts by changing
snprintf(buf, 2 * BUFSIZE, ... style lines to
snprintf(buf, sizeof(buf), ... where buf is an array.
Jukka Holappa
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
available (else there's no way to interpret the list links). Change
pg_locks view to show transaction ID locks separately from ordinary
relation locks. Avoid showing N duplicate rows when the same lock is
held multiple times (seems unlikely that users care about exact hold
count). Improve documentation.
to false provides more SQL-spec-compliant behavior than we had before.
I am not sure that setting it false is actually a good idea yet; there
is a lot of client-side code that will probably be broken by turning
autocommit off. But it's a start.
Loosely based on a patch by David Van Wie.
column additions, deletions, and renames that would let a child table
get out of sync with its parent. Patch by Alvaro Herrera, with some
kibitzing by Tom Lane.
to the table function, thus preventing memory leakage accumulation across
calls. This means that SRFs need to be careful to distinguish permanent
and local storage; adjust code and documentation accordingly. Patch by
Joe Conway, very minor tweaks by Tom Lane.
bit on the indexes.
I also attach clusterdb and clusterdb.sgml; both of them are blatant
rips of vacuumdb and vacuumdb.sgml, but get the job done. Please review
them, as I'm probably making a lot of mistakes with SGML and I can't
compile it here.
vacuumdb itself is not very comfortable to use when the databases have
passwords, because it has to connect once for each table (I can probably
make it connect only once for each database; should I?). Because of
this I added a mention of PGPASSWORDFILE in the documentation, but I
don't know if that is the correct place for that.
Alvaro Herrera
value '-2' is used to indicate a variable-width type whose width is
computed as strlen(datum)+1. Everything that looks at typlen is updated
except for array support, which Joe Conway is working on; at the moment
it wouldn't work to try to create an array of cstring.
>>" It's also possible to select no escape character by writing ESCAPE ''.
>>In this case there is no way to turn off the special meaning of
>>underscore and percent signs in the pattern."
Joe Conway
with OPAQUE, as per recent pghackers discussion. I still want to do some
more work on the 'cstring' pseudo-type, but I'm going to commit the bulk
of the changes now before the tree starts shifting under me ...
FOUND is set whenever a SELECT INTO returns > 0 rows, *or* when an
INSERT, UPDATE, or DELETE affects > 0 rows. We implemented the first
part of this behavior, but not the second.
I also improved the documentation on the various situations in which
FOUND can be set (excluding inside FOR loops, which I still need to
think about), and added some regression tests for this behavior.
Neil Conway
> Quick system function to pull out the current database.
>
> I've used this a number of times to allow stored procedures to find out
> where they are. Especially useful for those that do logging or hit a
> remote server.
>
> It's called current_database() to match with current_user().
It's also a necessity for an informational schema. The catalog
(database) name is required in a number of places.
Rod Taylor
The -n and -N options were removed. Quoting is now smart enough to
supply quotes if and only if necessary.
Numerical types are now printed without quotes, except in cases of
special values such as NaN.
Boolean values printed as true and false.
Most string literals now do not escape whitespace characters (newlines,
etc.) for portability.
SET SESSION AUTHORIZATION argument is a string literal, to follow SQL.
Made commands output by pg_dump use consistent spacing and indentation.
This patch is an updated version of the lock listing patch. I've made
the following changes:
- write documentation
- wrap the SRF in a view called 'pg_locks': all user-level
access should be done through this view
- re-diff against latest CVS
One thing I chose not to do is adapt the SRF to use the anonymous
composite type code from Joe Conway. I'll probably do that eventually,
but I'm not really convinced it's a significantly cleaner way to
bootstrap SRF builtins than the method this patch uses (of course, it
has other uses...)
Neil Conway
sets of triggers. Also modify psql \d command to show foreign key
constraints as such and hide the triggers. pg_get_constraintdef()
function added to backend to support these. From Rod Taylor, code
review and some editorialization by Tom Lane.
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
Chapter 1. libpq - C Library
1.3. Command Execution Functions
1.3.3. Escaping binary strings for inclusion in SQL queries
I found the line
"The result string length does not include the terminating zero byte of the result."
is not right.
The result string length does indeed include the terminating zero byte.
Christoph Haller
> > This patch improves the documentation of the UPDATE and ALTER TABLE
> > commands to elaborate on the effect of specifying an "ONLY" clause.
>
> Unfortunately this is still only half the truth ... see the
> SQL_INHERITANCE configuration variable.
Okay, I've attached an updated patch with more information on
SQL_INHERITANCE and inheritance behavior in prior releases.
Neil Conway
PGPASSWORDFILE environment variable. I have modified libpq to make use
of this variable. I present the first cut here.
Currently the format for the file should be
host:port:database:user:password
Alvaro Herrera
to make a reasonable attempt at accounting for palloc overhead, not just
the requested size of each memory chunk. Since in many scenarios this
will make for a significant reduction in the amount of space acquired,
partially compensate by doubling the default value of SORT_MEM to 1Mb.
Per discussion in pgsql-general around 9-Jun-2002..
relfilenode.
I sent the CLUSTER patch a few days ago and I think it was missed. I
append it again, this time including the regression test files. For the
committer, please note that you have to cvs add the files as they don't
exist. Maybe add to the parallel and serial schedules also, but I don't
know such stuff.
Alvaro Herrera (<alvherre[a]atentus.com>)
has_language_privilege, has_schema_privilege to let SQL queries test
all the new privilege types in 7.3. Also, add functions pg_table_is_visible,
pg_type_is_visible, pg_function_is_visible, pg_operator_is_visible,
pg_opclass_is_visible to test whether objects contained in schemas are
visible in the current search path. Do some minor cleanup to centralize
accesses to pg_database, as well.
Still needs to be filled with more information, but it gives us a
framework to have a User's Guide with complete coverage of the basic
SQL operations. Move arrays into data type chapter, inheritance into
DDL chapter (for now).
Make <comment>s show up in the output while the version number ends in
"devel".
Allow cross-book references with entities &cite-user; etc.
of functions returning domain types, update documentation for typtype,
move get_typtype to lsyscache.c (actually, resurrect the old version),
add defense against creating pseudo-typed table columns, fix some
bogus list-parsing in grammar. Issues remain with respect to alias
handling and type checking; Joe is on those.
types for Table Functions, as previously proposed on HACKERS. Here is a
brief explanation:
1. Creates a new pg_type typtype: 'p' for pseudo type (currently either
'b' for base or 'c' for catalog, i.e. a class).
2. Creates new builtin type of typtype='p' named RECORD. This is the
first of potentially several pseudo types.
3. Modify FROM clause grammer to accept:
SELECT * FROM my_func() AS m(colname1 type1, colname2 type1, ...)
where m is the table alias, colname1, etc are the column names, and
type1, etc are the column types.
4. When typtype == 'p' and the function return type is RECORD, a list
of column defs is required, and when typtype != 'p', it is
disallowed.
5. A check was added to ensure that the tupdesc provide via the parser
and the actual return tupdesc match in number and type of
attributes.
When creating a function you can do:
CREATE FUNCTION foo(text) RETURNS setof RECORD ...
When using it you can do:
SELECT * from foo(sqlstmt) AS (f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) AS f(f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) f(f1 int, f2 text, f3 timestamp)
Included in the patches are adjustments to the regression test sql and
expected files, and documentation.
p.s.
This potentially solves (or at least improves) the issue of builtin
Table Functions. They can be bootstrapped as returning RECORD, and
we can wrap system views around them with properly specified column
defs. For example:
CREATE VIEW pg_settings AS
SELECT s.name, s.setting
FROM show_all_settings()AS s(name text, setting text);
Then we can also add the UPDATE RULE that I previously posted to
pg_settings, and have pg_settings act like a virtual table, allowing
settings to be queried and set.
Joe Conway
functionality of the command is basically identical to that of
BEGIN; it just accepts a few extra options (only one of which
PostgreSQL currently implements), and is standards-compliant.
The patch includes a simple regression test and documentation.
[ Regression tests removed, per Peter.]
Neil Conway
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
attstattarget to indicate 'use the default'. The default is now a GUC
variable default_statistics_target, and so may be changed on the fly. Along
the way we gain the ability to have pg_dump dump the per-column statistics
target when it's not the default. Patch by Neil Conway, with some kibitzing
from Tom Lane.
All of the internal tags are of the latter.
The other thing I noticed is that most of the quick examples in the file
use a para and synopsis. Is there a reason we're not using <example/> ?
Rod Taylor
The attached patch completes the following TODO item:
* Generate failure on short COPY lines rather than pad NULLs
I also restructed a lot of the existing COPY code, did some code
review on the column list patch sent in by Brent Verner a little
while ago, and added some regression tests. I also added an
explicit check (and resultant error) for extra data before
the end-of-line.
Neil Conway
changes mentioned above, and also adds a new function to the tablefunc
API. The tablefunc API change adds the following function:
* Oid foidGetTypeId(Oid foid) - Get a function's typeid given the
* function Oid. Use this together with TypeGetTupleDesc() to get a
* TupleDesc which is derived from the function's declared return type.
In the next post I'll send the contrib/tablefunc patch, which
illustrates the usage of this new function. Also attached is a doc patch
for this change. The doc patch also adds a function that I failed to
document previously.
Joe Conway
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
pg_language.lancompiler
pg_operator.oprprec
pg_operator.oprisleft
pg_proc.proimplicit
pg_proc.probyte_pct
pg_proc.properbyte_cpu
pg_proc.propercall_cpu
pg_proc.prooutin_ratio
pg_shadow.usetrace
pg_type.typprtlen
pg_type.typreceive
pg_type.typsend
Attempts to use the obsoleted attributes of pg_operator or pg_proc
in the CREATE commands will be greeted by a warning. For pg_type,
there is no warning (yet) because pg_dump scripts still contain these
attributes.
Also remove new but already obsolete spellings
isVolatile, isStable, isImmutable in WITH clause. (Use new syntax
instead.)
extension to create binary compatible casts. Includes dependency tracking
as well.
pg_proc.proimplicit is now defunct, but will be removed in a separate
commit.
pg_dump provides a migration path from the previous scheme to declare
casts. Dumping binary compatible casts is currently impossible, though.
reflects the changes in the tablefunc-fix patch that I sent in the other
day. It also refers to "see contrib/tablefunc for more examples", which
is next on my list of things to finish and submit.
Joe Conway
COPY x (a,d,c,b) from stdin;
COPY x (a,c) to stdout;
as well as the corresponding changes to pg_dump to use the new
functionality. This functionality is not available when using
the BINARY option. If a column is not specified in the COPY FROM
statement, its default values will be used.
In addition to this functionality, I tweaked a couple of the
error messages emitted by the new COPY <options> checks.
Brent Verner
> > David Clark (dclarknospam@opsi.co.za) reports a bug with a severity
> > Table 3-7 SQL Literal escaped octets shows the input escape
> > representation for a single quote as '\\'' , but the third paragraph
> > below table 3-8 SQL Output Escaped Octets says that the single quote
> > must be input as '\''
>
> Nice catch. '\'' is correct as shown in the example in Table 3-7.
>
> >
> > Also in the same paragraph mentioned above it says input for the
> > single quote must be '\'' (or '\\134') shouldn't this be (or '\\047')
>
> Also a bug. Should be '\\047', as you pointed out.
>
Here's a patch to fix the binary string doc errors.
Joe Conway
UNIQUE and DISTINCT predicates are both listed as implemented -- AFAIK,
neither is.
I also included another trivial patch which adds the default location
of the DSSSL stylesheets on my system (Debian unstable, docbook-dsssl
1.76) to the list of paths that configure looks for.
Neil Conway
pg_relcheck is gone; CHECK, UNIQUE, PRIMARY KEY, and FOREIGN KEY
constraints all have real live entries in pg_constraint. pg_depend
exists, and RESTRICT/CASCADE options work on most kinds of DROP;
however, pg_depend is not yet very well populated with dependencies.
(Most of the ones that are present at this point just replace formerly
hardwired associations, such as the implicit drop of a relation's pg_type
entry when the relation is dropped.) Need to add more logic to create
dependency entries, improve pg_dump to dump constraints in place of
indexes and triggers, and add some regression tests.
Fix pg_dump to not quote the function name in the storage tag.
Fix pg_dump so GRANT/REVOKE(ACL) tag entries are not quoted, for
consistency.
Fix pg_restore to properly handle quotes and some spaces in -P.
Also implement alternative forms to expose the PostgreSQL CREATE FUNCTION
features.
Implement syntax for READ ONLY and READ WRITE clauses in SET TRANSACTION.
READ WRITE is already implemented (of course).
Implement syntax for "LIKE table" clause in CREATE TABLE. Should be fairly
easy to complete since it resembles SELECT INTO.
Implement MATCH SIMPLE clause for foreign key definitions. This is explicit
SQL99 syntax for the default behavior, so we now support it :)
Start implementation of shorthand for national character literals in
scanner. For now, just swallow the leading "N", but sometime soon let's
figure out how to pass leading type info from the scanner to the parser.
We should use the same technique for binary and hex bit string literals,
though it might be unusual to have two apparently independent literal
types fold into the same storage type.
> information and SQL language specific info wrt SRFs. I've taken to
> calling this feature "Table Fuctions" to be consistent with (at least)
> one well known RDBMS.
Joe Conway
Second cut attached. This one just adds a boolean option to the existing
function to indicate that implicit schemas are to be included (or not).
I remembered the docs as well this time :-)
Dave Page
but occasionally I may need to shut down the server and restart it
w/o tcpip sockets. Postmaster has the -i option to turn on tcpip
connections, but it wasn't immediately clear how to easily or
temporarily turn it off (when it's been enabled in postgresql.conf).
In fact, it wasn't clear to me until digging in to postmaster.c that
I could pass '-c tcpip_socket=false' or '--tcpip_socket=false'.
(And then of course when I looked more closely at the man page I
realized I'd missed the proper part of the documentation.) What I'd
been looking for is a flag that would have the opposite effect of
'-i', and it's conceivable that others will be looking for specific
flags to do the opposite of '-F' and '-S'.
I was preparing to add options to postmaster until I realized that
maybe the solution is just to add some documentation.
If you'd rather have 1 character options to accomplish this, I'd be
happy to do that-- adding those 9 lines of code is definitely within
my ability. :) (Although, the "right" letter to be the opposite of -S
isn't clear to me, since -s is already taken.)
Ron Snyder.
>
> > Is it a good idea to provide an example (such as the above), or should I
> > just try and describe the behaviour?
>
> Examples are generally good things ...
OK, the attached documentation patch provides some simple examples of
use of tablename as a parameter, %ROWTYPE and %TYPE.
In the end I decided that the documentation is literally correct, but
hard to follow without any examples explicitly showing the use of a
table name as a parameter.
Andrew McMillan
Remove ODBC-compatible empty parentheses from calls to SQL99 functions
for which these parentheses do not match the standard.
Update the ODBC driver to ensure compatibility with the ODBC standard
for these functions (e.g. CURRENT_TIMESTAMP, CURRENT_USER, etc).
Include a new appendix in the User's Guide which lists the labeled features
for SQL99 (the labeled features replaced the "basic", "intermediate",
and "advanced" categories from SQL92). features.sgml does not yet split
this list into "supported" and "unsupported" lists.
Implement SQL99 SIMILAR TO as a synonym for our existing operator "~".
Implement SQL99 regular expression SUBSTRING(string FROM pat FOR escape).
Extend the definition to make the FOR clause optional.
Define textregexsubstr() to actually implement this feature.
Update the regression test to include these new string features.
All tests pass.
Rename the regular expression support routines from "pg95_xxx" to "pg_xxx".
Define CREATE CHARACTER SET in the parser per SQL99. No implementation yet.
Implement SQL99 SIMILAR TO as a synonym for our existing operator "~".
Implement SQL99 regular expression SUBSTRING(string FROM pat FOR escape).
Extend the definition to make the FOR clause optional.
Define textregexsubstr() to actually implement this feature.
Update the regression test to include these new string features.
All tests pass.
Rename the regular expression support routines from "pg95_xxx" to "pg_xxx".
Define CREATE CHARACTER SET in the parser per SQL99. No implementation yet.
function body (and other properties) as a function in the language
is created. This generalizes ad hoc code that already existed for
the built-in languages.
The validation now happens after the pg_proc tuple of the new function
is created, so it is possible to define recursive SQL functions.
Add some regression test cases that cover bogus function definition
attempts.
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
underlying function; but cause psql's \do to show the underlying
function's comment if the operator has no comment of its own, to preserve
the useful functionality of the original behavior. Also, implement
COMMENT ON SCHEMA. Patch from Rod Taylor.
to reset session userid to the originally-authenticated name. Also,
relax SET SESSION AUTHORIZATION to allow specifying one's own username
even if one is not superuser, so as to avoid unnecessary error messages
when loading a pg_dump file that uses this command. Per discussion from
several months ago.
per pghackers discussion. Add some more typsanity tests, and clean
up some problems exposed thereby (broken or missing array types for
some built-in types). Also, clean up loose ends from unknownin/out
patch.
The attached patch allows views to have default values. You can't
specify a default value within a CREATE VIEW statement, it must be
done using ALTER TABLE ... ALTER COLUMN ... SET DEFAULT after the
view has already been created. Most of the hard work was done by
Tom Lane, I just patched pg_dump and updated the documentation.
Neil Conway <neilconway@rogers.com>
capabilities of specifying time zones as intervals per SQL9x.
Put refentrytitle contents on the same line as the tag.
Otherwise, leading whitespace is propagated into the product, which
(at least) messes up the ToC layout.
Remove (some) docinfo tags containing dates. Best to omit if the dates
are not accurate; maybe use CVS dates instead or leave them out.
different privilege bits (might as well make use of the space we were
wasting on padding). EXECUTE and USAGE bits for procedures, languages
now are separate privileges instead of being overlaid on SELECT. Add
privileges for namespaces and databases. The GRANT and REVOKE commands
work for these object types, but we don't actually enforce the privileges
yet...
(tgrelid, tgname). This provides an additional check on trigger name
uniqueness per-table (which was already enforced by the code anyway).
With this change, RelationBuildTriggers will read the triggers in
order by tgname, since it's scanning using this index. Since a
predictable trigger ordering has been requested for some time, document
this behavior as a feature. Also document that rules fire in name
order, since yesterday's changes to pg_rewrite indexing cause that too.
DROP RULE and COMMENT ON RULE syntax adds an 'ON tablename' clause,
similar to TRIGGER syntaxes. To allow loading of existing pg_dump
files containing COMMENT ON RULE, the COMMENT code will still accept
the old syntax --- but only if the target rulename is unique across
the whole database.
an 'opclass owner' column in pg_opclass. Nothing is done with it at
present, but since there are plans to invent a CREATE OPERATOR CLASS
command soon, we'll probably want DROP OPERATOR CLASS too, which
suggests that a notion of ownership would be a good idea.
qualified operator names directly, for example CREATE OPERATOR myschema.+
( ... ). To qualify an operator name in an expression you need to write
OPERATOR(myschema.+) (thanks to Peter for suggesting an escape hatch).
I also took advantage of having to reformat pg_operator to fix something
that'd been bugging me for a while: mergejoinable operators should have
explicit links to the associated cross-data-type comparison operators,
rather than hardwiring an assumption that they are named < and >.
selected as the creation target namespace; to make that happen, you
must explicitly set search_path that way. This makes initdb a hair
more complex but seems like a good safety feature.
which covers some recent installation schemes.
Add Mandrake installation layout to directories to check for stylesheets.
Allow documentation build to proceed if stylesheets were not found, in case
the stylesheets might be found through the SGML catalog mechanism.
the libpgtcl "pg_execute" command. This was mentioned on
pgsql-interfaces on Mar 3. I am posting it here in the hope that someone
will check to see if it makes sense and is correct SGML-wise. I did run
it through jade, but this is my first try at this sort of thing.
ljb
entries, per pghackers discussion. This fixes aggregates to live in
namespaces, and also simplifies/speeds up lookup in parse_func.c.
Also, add a 'proimplicit' flag to pg_proc that controls whether a type
coercion function may be invoked implicitly, or only explicitly. The
current settings of these flags are more permissive than I would like,
but we will need to debate and refine the behavior; for now, I avoided
breaking regression tests as much as I could.
volatile), rather than the old cachable/noncachable distinction. This
allows indexscan optimizations in many places where we formerly didn't.
Also, add a pronamespace column to pg_proc (it doesn't do anything yet,
however).
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
depend on this rather than the trigger argument strings to locate the
other relation to test. This makes RI triggers function properly in
the presence of schemas and temp tables. Along the way, fix bogus lack
of locking in RI triggers, handle quoting of names fully correctly,
compute required sizes of query buffers with some semblance of accuracy.
path. The default behavior if no per-user schemas are created is that
all users share a 'public' namespace, thus providing behavior backwards
compatible with 7.2 and earlier releases. Probably the semantics and
default setting will need to be fine-tuned, but this is a start.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
the parsetree representation. As yet we don't *do* anything with schema
names, just drop 'em on the floor; but you can enter schema-compatible
command syntax, and there's even a primitive CREATE SCHEMA command.
No doc updates yet, except to note that you can now extract a field
from a function-returning-row's result with (foo(...)).fieldname.
> > to perform sql command:
> > update pg_amop set amopreqcheck = true where amopclaid =
> > (select oid from pg_opclass where opcname = 'gist_txtidx_ops');
>
> Oleg, sorry, I don't understand where this should appear. In the README
> file, and if so, where? Is this something only for people upgrading
> from 7.2?
Sorry Bruce, I was unclear. I have attached patch to Readme.tsearch
Also, It'd be worth to mention in Changes to point users of tsearch
about importang upgrade notices.
Oleg Bartunov
! DIFFERENCE (− or ∖): builds the set difference of
two tables. Let <classname>R</classname> and
<classname>S</classname>
again be two tables with the same
arity. <classname>R</classname> - <classname>S</classname>
--- 488,494 ----
<listitem>
<para>
! EXCEPT (− or ∖): builds the set difference of
- domain.patch -> source patch against pgsql in cvs
- drop_domain.sgml and create_domain.sgml -> New doc/src/sgml/ref docs
- dominfo.txt -> basic domain related queries I used for testing
[ ADDED TO /doc]
Enables domains of array elements -> CREATE DOMAIN dom int4[3][2];
Uses a typbasetype column to describe the origin of the domain.
Copies data to attnotnull rather than processing in execMain().
Some documentation differences from earlier.
If this is approved, I'll start working on pg_dump, and a \dD <domain>
option in psql, and regression tests. I don't really feel like doing
those until the system table structure settles for pg_type.
CHECKS when added, will also be copied to to the table attributes. FK
Constraints (if I ever figure out how) will be done similarly. Both
will lbe handled by MergeDomainAttributes() which is called shortly
before MergeAttributes().
Rod Taylor
> > > > It was made to cope with encoding such as an Asian bloc in 7.2Beta2.
> > > >
> > > > Added ServerEncoding
> > > > Korean (JOHAB), Thai (WIN874),
> > > > Vietnamese (TCVN), Arabic (WIN1256)
> > > >
> > > > Added ClientEncoding
> > > > Simplified Chinese (GBK), Korean (UHC)
> > > >
> > > >
> > > >
> http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2b2.newencoding.diff.tar.gz
> > > > (608K)
> > >
> > > Looks good. I need some people to review this for me.
> >
> > For me they look good too. The only missing part is a
> > documentation. I will ask him to write it up. If he couldn't, I will
> > do it for him.
> > > The diff is 3mb
> > > but appears to address only additions to multibyte. I have attached a
> > > list of files it modifies. Also, look at the sizes of the mb/
> > > directory. It is getting large:
> > >
> > > 4 ./CVS
> > > 6 ./Unicode/CVS
> > > 3433 ./Unicode
> > > 6197 .
> >
> > Yes. We definitely need the on-the-fly encoding addition capability:
> > i.e. CREATE CHRACTER SET in the future...
> > --
> > Tatsuo Ishii
> >
> >
Address chainge.
http://www.sankyo-unyu.co.jp/Pool/postgresql-7.2.newencoding.diff.gz
Add PsqlODBC and document ...etc patch.
Eiji Tokuya
(current as of a few hours ago.)
This patch:
1. Adds PG_GETARG_xxx_P_SLICE() macros and associated support routines.
2. Adds routines in src/backend/access/tuptoaster.c for fetching only
necessary chunks of a toasted value. (Modelled on latest changes to
assume chunks are returned in order).
3. Amends text_substr and bytea_substr to use new methods. It now
handles multibyte cases -and should still lead to a performance
improvement in the multibyte case where the substring is near the
beginning of the string.
4. Added new command: ALTER TABLE tabname ALTER COLUMN colname SET
STORAGE {PLAIN | EXTERNAL | EXTENDED | MAIN} to parser and documented in
alter-table.sgml. (NB I used ColId as the item type for the storage
mode string, rather than a new production - I hope this makes sense!).
All this does is sets attstorage for the specified column.
4. AlterTableAlterColumnStatistics is now AlterTableAlterColumnFlags and
handles both statistics and storage (it uses the subtype code to
distinguish). The previous version of my patch also re-arranged other
code in backend/commands/command.c but I have dropped that from this
patch.(I plan to return to it separately).
5. Documented new macros (and also the PG_GETARG_xxx_P_COPY macros) in
xfunc.sgml. ref/alter_table.sgml also contains documentation for ALTER
COLUMN SET STORAGE.
John Gray
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
primary keys after the fact!
Also, we need to add regression tests for alter table / add primary key
and alter table / drop constraint. These shouldn't be added until 7.3
tho
methinks...
Chris
(backslash-r, backslash-n) for protection against newline-conversion
munging. In future we will also tweak COPY FROM, but this part of the
change should be backwards-compatible. Per pghackers discussion.
Also, update COPY reference page to describe the backslash conversions
more completely and accurately.
> Looking at this I also found an ecpg TODO list in the docs:
>
>
http://candle.pha.pa.us/main/writings/pgsql/sgml/ecpg-develop.html
>
> Seems that TODO section should be removed. Some items are done,
others
> are on the main TODO list.
That's correct. I did not fix the docs for quite some time.
Michael
--
Michael Meskes
---------------------------------------------------------------------------
When you run 'ecpg --help' you get the following:
-t turn on autocommit of transactions
amongst the other options... Shouldn't this be OFF as per the
documentation?
Best regards, Lee.
--
Lee Kindness, Senior Software Engineer, lkindness@csl.co.uk
Update the list of recognized time zones.
Document the range of arguments allowed for SET TIME ZONE.
Still need to add info on other date/time symbols (e.g. "AM", "T")
and to freshen the docs on the date/time parsing rules.
Mention SQL9x precision syntax for date/time types.
Use PostgreSQL consistantly throughout docs. Before, usage was split evenly
between Postgres and PostgreSQL.
remove brain-dead rule that double quotes are needed if and only if the
datatype is pass-by-reference; neither direction of the implication holds
water. Instead, examine the actual data string to see if it contains
any characters that force us to quote it.
Add some documentation about quoting of array values, which was previously
explained nowhere AFAICT.
Editing pass over entire chapter
Rewrote section dealing with Large Objects to also talk about bytea support
Removed secion on Serialize functionality a we intend to remove it in the
next release
> So I would base this discussion on the premise "bytea stores binary data"
> (insert examples).
>
> Some stylistic issues:
>
> bytea => <type>bytea</type>
>
> NULLs => zero bytes/bytes of value zero ("NULL" is too overloaded)
>
> 'non-printable' => <quote>nonprintable</quote>
>
> MUST => <emphasis>must</emphasis>
>
Here's a patch against *CVS tip* to address Peter's comments. Please let
me know what you think!
Joe Conway
libpq.sgml
I was trying (but gave up) to cross-reference back to the input escape
table in the User's Guide, but could not get the documentation to
compile with a cross-book xref (missing IDREF error). Can a cross-book
xref be done?
Joe Conway
Operators", plagiarized shamelessly from the "String Functions and
Operators" section. There were enough differences that it made sense (at
least to me) to give this its own section instead of cramming it in with
normal string functions. This way I could also make the examples
relevant, which is particularly important for bytea.
One thing I think worth mentioning: while documenting the trim()
function I realized that I never implemented the bytea equivalent of
rtrim and ltrim. Therefore, the 'leading' and 'trailing' forms of trim,
available with text, are not available with bytea (I'd be happy to
correct this, but since it would require an initdb, I guess not until
7.3) -- the submitted doc accurately reflects this.
I will look for other areas of the docs that need mention of bytea, but
any guidance would be much appreciated.
--
Here's a second bytea documentation patch. This one significantly
expands the "Binary Data" section added by Bruce recently.
Joe Conway
Admin Guide. Move discussion of template databases out of footnotes
in CREATE DATABASE ref page and into a section of the Admin Guide.
Clean up various obsolete claims, do some copy-editing.
bpchar, bit, numeric with typmod -1. Alter format_type so that this
representation is printed when the typmod is -1. This ensures that
tables having such columns can be pg_dump'd and reloaded correctly.
Also, remove the rather useless and non-SQL-compliant default
precision and scale for type NUMERIC. A numeric column declared as
such (with no precision/scale) will now have typmod -1 which means
that numeric values of any precision/scale can be stored in it,
without conversion to a uniform scale. This seems significantly
more useful than the former behavior. Part of response to bug #513.
