This fills in some gaps in planner support for starts_with() and
the equivalent ^@ operator:
* A condition such as "textcol ^@ constant" can now use a regular
btree index, not only an SP-GiST index, so long as the index's
collation is C. (This works just like "textcol LIKE 'foo%'".)
* "starts_with(textcol, constant)" can be optimized the same as
"textcol ^@ constant".
* Fixed-prefix LIKE and regex patterns are now more like starts_with()
in another way: if you apply one to an SPGiST-indexed column, you'll
get an index condition using ^@ rather than two index conditions with
>= and <.
Per a complaint from Shay Rojansky. Patch by me; thanks to
Nathan Bossart for review.
Discussion: https://postgr.es/m/232599.1633800229@sss.pgh.pa.us
The error handling here was a mess, as a result of a fundamentally
bad design (relying on errno to keep its value much longer than is
safe to assume) as well as a lot of just plain sloppiness, both as
to noticing errors at all and as to reporting the correct errno.
Moreover, the recent addition of LZ4 compression broke things
completely, because liblz4 doesn't use errno to report errors.
To improve matters, keep the error state in the DirectoryMethodData or
TarMethodData struct, and add a string field so we can handle cases
that don't set errno. (The tar methods already had a version of this,
but it can be done more efficiently since all these cases use a
constant error string.) Make the dir and tar methods handle errors
in basically identical ways, which they didn't before.
This requires copying errno into the state struct in a lot of places,
which is a bit tedious, but it has the virtue that we can get rid of
ad-hoc code to save and restore errno in a number of places ... not
to mention that it fixes other places that should've saved/restored
errno but neglected to.
In passing, fix some pointlessly static buffers to be ordinary
local variables.
There remains an issue about exactly how to handle errors from
fsync(), but that seems like material for its own patch.
While the LZ4 problems are new, all the rest of this is fixes for
old bugs, so backpatch to v10 where walmethods.c was introduced.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
If a SQL-standard function body contains an INSERT ... SELECT statement,
any function parameters referenced within the SELECT were always printed
in $N style, rather than using the parameter name if any. While not
strictly incorrect, this wasn't the intention, and it's inconsistent
with the way that such parameters would be printed in any other kind
of statement.
The cause is that the recursion to get_query_def from
get_insert_query_def neglected to pass down the context->namespaces
list, passing constant NIL instead. This is a very ancient oversight,
but AFAICT it had no visible consequences before commit e717a9a18
added an outermost namespace with function parameters. We don't allow
INSERT ... SELECT as a sub-query, except in a top-level WITH clause,
where it couldn't contain any outer references that might need to access
upper namespaces. So although that's arguably a bug, I don't see any
point in changing it before v14.
In passing, harden the code added to get_parameter by e717a9a18 so that
it won't crash if a PARAM_EXTERN Param appears in an unexpected place.
Per report from Erki Eessaar. Code fix by me, regression test case
by Masahiko Sawada.
Discussion: https://postgr.es/m/AM9PR01MB8268347BED344848555167FAFE949@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
Commit 81d5995b4b introduced more fine-grained errormessages for
incorrect relkinds for publication, while unlogged and temporary
tables were reported with using the same message. This provides
separate error messages for these types of relpersistence.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALj2ACW9S=AswyQHjtO6WMcsergMkCBTtzXGrM8DX26DzfeTLQ@mail.gmail.com
At present, there is an undocumented coding rule that you must call
RecoveryInProgress(), or do something else that results in a call
to InitXLogInsert(), before trying to write WAL. Otherwise, the
WAL construction buffers won't be initialized, resulting in
failures.
Since it's not good to rely on a status inquiry function like
RecoveryInProgress() having the side effect of initializing
critical data structures, instead do the initialization eariler,
when the backend first starts up.
Patch by me. Reviewed by Nathan Bossart and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
When changing REPLICA IDENTITY INDEX to another one, the target table's
relcache was not being invalidated. This leads to skipping update/delete
operations during apply on the subscriber side as the columns required to
search corresponding rows won't get logged.
Author: Tang Haiying, Hou Zhijie
Reviewed-by: Euler Taveira, Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB61133CA11630DAE45BC6AD95FB939@OS0PR01MB6113.jpnprd01.prod.outlook.com
Add a comment explaining why the pgstats accounting used during
opportunistic heap pruning operations (to maintain the current number of
dead tuples in the relation) needs to compensate by subtracting away the
number of new LP_DEAD items. This is needed so it can avoid completely
forgetting about tuples that become LP_DEAD items during pruning -- they
should still count.
It seems more natural to discuss this issue at the only relevant call
site (opportunistic pruning), since the same issue does not apply to the
only other caller (the VACUUM call site). Move everything there too.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzm7f+A6ej650gi_ifTgbhsadVW5cujAL3punpupHff5Yg@mail.gmail.com
Commit 90627cf98 added support for retaining the data directory even on
successful tests, but failed to document the environment variable which
controls retention. This adds a small note to the TAP test README about
PG_TEST_NOCLEAN which when set skips removing the data directories from
successful tests.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2B02C1B3-3F41-4E14-92B9-005D83623A0B@yesql.se
The documentation says plainly that \password acts on "the current user"
by default. What it actually acted on, or tried to, was the username
used to log into the current session. This is not the same thing if
one has since done SET ROLE or SET SESSION AUTHENTICATION. Aside from
the possible surprise factor, it's quite likely that the current role
doesn't have permissions to set the password of the original role.
To fix, use "SELECT CURRENT_USER" to get the role name to act on.
(This syntax works with servers at least back to 7.0.) Also, in
hopes of reducing confusion, include the role name that will be
acted on in the password prompt.
The discrepancy from the documentation makes this a bug, so
back-patch to all supported branches.
Patch by me; thanks to Nathan Bossart for review.
Discussion: https://postgr.es/m/747443.1635536754@sss.pgh.pa.us
pg_stat_get_slru() in pgstatfuncs.c would point to one element after the
end of the array PgStat_SLRUStats when finishing to scan its entries.
This had no direct consequences as no data from the extra memory area
was read, but static analyzers would rightfully complain here. So let's
be clean.
While on it, this adds one regression test in the area reserved for
system views.
Reported-by: Alexander Kozhemyakin, via AddressSanitizer
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17280-37da556e86032070@postgresql.org
Backpatch-through: 13
Buildfarm members kittiwake and tadarida have witnessed errors at this
site. The site discarded key facts. Back-patch to v10 (all supported
versions).
Reviewed by Michael Paquier and Tom Lane.
Discussion: https://postgr.es/m/20211107013157.GB790288@rfd.leadboat.com
It is up to the heap_page_prune() caller to decide what to do about
updating the FSM for a page following pruning. Update old comments that
address what we might want to do as if it was the responsibility of
heap_page_prune() itself. heap_page_prune() doesn't have enough
high-level context to make a sensible choice.
Presently, the archive_status directory was scanned for each file to
archive. When there are many status files, say because archive_command
has been failing for a long time, these directory scans can get very
slow. With this change, the archiver remembers several files to archive
during each directory scan, speeding things up.
To ensure timeline history files are archived as quickly as possible,
XLogArchiveNotify() forces the archiver to do a new directory scan as
soon as the .ready file for one is created.
Nathan Bossart, per a long discussion involving many people. It is
not clear to me exactly who out of all those people reviewed this
particular patch.
Discussion: http://postgr.es/m/CA+TgmobhAbs2yabTuTRkJTq_kkC80-+jw=pfpypdOJ7+gAbQbw@mail.gmail.com
Discussion: http://postgr.es/m/620F3CE1-0255-4D66-9D87-0EADE866985A@amazon.com
It's a coin toss which of these is a better default assumption.
However, of the machines we have in the buildfarm, the only ones
relying on the fallback socklen_t definition are ancient HPUX,
and on that platform unsigned int is the right choice. Minor
tweak to ee3a1a5b6.
Discussion: https://postgr.es/m/1440792.1636558888@sss.pgh.pa.us
PostgreSQL 13 and newer versions are directly impacted by that through
the SQL function normalize(), which would cause a call of this function
to write one byte past its allocation if using in input an empty
string after recomposing the string with NFC and NFKC. Older versions
(v10~v12) are not directly affected by this problem as the only code
path using normalization is SASLprep in SCRAM authentication that
forbids the case of an empty string, but let's make the code more robust
anyway there so as any out-of-core callers of this function are covered.
The solution chosen to fix this issue is simple, with the addition of a
fast-exit path if the decomposed string is found as empty. This would
only happen for an empty string as at its lowest level a codepoint would
be decomposed as itself if it has no entry in the decomposition table or
if it has a decomposition size of 0.
Some tests are added to cover this issue in v13~. Note that an empty
string has always been considered as normalized (grammar "IS NF[K]{C,D}
NORMALIZED", through the SQL function is_normalized()) for all the
operations allowed (NFC, NFD, NFKC and NFKD) since this feature has been
introduced as of 2991ac5. This behavior is unchanged but some tests are
added in v13~ to check after that.
I have also checked "make normalization-check" in src/common/unicode/,
while on it (works in 13~, and breaks in older stable branches
independently of this commit).
The release notes should just mention this commit for v13~.
Reported-by: Matthijs van der Vleuten
Discussion: https://postgr.es/m/17277-0c527a373794e802@postgresql.org
Backpatch-through: 10
protocol.sgml documented the layout for Type messages, but completely
dropped the ball otherwise, failing to explain what they are, when
they are sent, or what they're good for. While at it, do a little
copy-editing on the description of Relation messages.
In passing, adjust the comment for apply_handle_type() to make it
clearer that we choose not to do anything when receiving a Type
message, not that we think it has no use whatsoever.
Per question from Stefen Hillman.
Discussion: https://postgr.es/m/CAPgW8pMknK5pup6=T4a_UG=Cz80Rgp=KONqJmTdHfaZb0RvnFg@mail.gmail.com
Commit 5a1007a508 tried to introduce
an assertion that the block size was at least twice the size of a
tar block, but I got the math wrong. My error was reported to me
off-list.
In XLogCtlData, rename the structure member ThisTimeLineID to
InsertTimeLineID and update the comments to make clear that it's only
expected to be set after recovery is complete.
In StartupXLOG, replace the local variables ThisTimeLineID and
PrevTimeLineID with new local variables replayTLI and newTLI. In the
old scheme, ThisTimeLineID was the replay TLI until we created a new
timeline, and after that the replay TLI was in PrevTimeLineID. Now,
replayTLI is the TLI from which we last replayed WAL throughout the
entire function, and newTLI is either that, or the new timeline created
upon promotion.
Remove some misleading comments from the comment block just above where
recoveryTargetTimeLineGoal and friends are declared. It's become
incorrect, not only because ThisTimeLineID as a variable is now gone,
but also because the rmgr code does not care about ThisTimeLineID and
has not since what used to be the TLI field in the page header was
repurposed to store the page checksum.
Add a comment GetFlushRecPtr that it's only supposed to be used in
normal running, and an assertion to verify that this is so.
Per some ideas from Michael Paquier and some of my own. Review by
Michael Paquier also.
Discussion: http://postgr.es/m/CA+TgmoY1a2d1AnVR3tJcKmGGkhj7GGrwiNwjtKr21dxOuLBzCQ@mail.gmail.com
A couple of code paths related to logical decoding (WAL sender, slot
advancing, etc.) use XLogReadRecord(), feeding on error messages
generated by walreader.c on a failure. All those messages have no
context, making it harder to spot from where an error could come even if
these should not happen. All the other callers of XLogReadRecord() do
that already.
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/YYnTH6OyOwQcAdkw@paquier.xyz
We've seen intermittent failures in this test on slower buildfarm
machines, which I think can be explained by assuming that autovacuum
emitted some additional WAL. Disable autovacuum to stabilize it.
In passing, use stringwise not numeric comparison to compare
WAL file names. Doesn't matter at present, but they are
hex strings not decimal ...
Discussion: https://postgr.es/m/1372189.1636499287@sss.pgh.pa.us
Earlier versions of PostgreSQL featured a version of pg_basebackup
that wanted to edit tar archives but was too dumb to parse them
properly. The server made things easier for the client by failing
to add the two blocks of zero bytes that ought to end a tar file,
leaving it up to the client to do that.
But since commit 23a1c6578c, we
don't need this hack any more, because pg_basebackup is now smarter
and can parse tar files even if they are properly terminated! So
change the server to always properly terminate the tar files. Older
versions of pg_basebackup can't talk to new servers anyway, so
there's no compatibility break.
On the pg_basebackup side, we see still need to add the terminating
zero bytes if we're talking to an older server, but not when the
server is v15+. Hopefully at some point we'll be able to remove
some of this compatibility cruft, but it seems best to hang on to
it for now.
In passing, add a file header comment to bbstreamer_tar.c, to make
it clearer what's going on here.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
Commit 5a2832465f introduced some enums to represent all tables in schema
publications and used REL in their names. Use TABLE instead of REL in
those enums to avoid confusion with other objects like SEQUENCES that can
be part of a publication in the future.
In the passing, (a) Change one of the newly introduced error messages to
make it consistent for Create and Alter commands, (b) add missing alias in
one of the SQL Statements that is used to print publications associated
with the table.
Reported-by: Tomas Vondra, Peter Smith
Author: Vignesh C
Reviewed-by: Hou Zhijie, Peter Smith
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ%40mail.gmail.com
Commit 23a1c6578c improved
pg_basebackup's ability to parse tar archives, but also arranged
to parse them only when we need to make some modification to the
contents of the archive. That's a problem, because the server
doesn't actually terminate tar archives. When the new parsing
logic was engaged, pg_basebackup would properly terminate the
tar file, but when it was skipped, pg_basebackup would just write
whatever it got from the server, meaning that the terminator
was missing.
Most versions of tar are willing to overlook the missing terminator, but
the AIX buildfarm animals were not. Fix by inventing a new kind of
bbstreamer that just blindly adds a terminator, and using it whenever we
don't parse the tar archive.
Discussion: http://postgr.es/m/CA+TgmoZbNzsWwM4BE5Jb_qHncY817DYZwGf+2-7hkMQ27ZwsMQ@mail.gmail.com
libpq collects up to a bufferload of data whenever it reads data from
the socket. When SSL or GSS encryption is requested during startup,
any additional data received with the server's yes-or-no reply
remained in the buffer, and would be treated as already-decrypted data
once the encryption handshake completed. Thus, a man-in-the-middle
with the ability to inject data into the TCP connection could stuff
some cleartext data into the start of a supposedly encryption-protected
database session.
This could probably be abused to inject faked responses to the
client's first few queries, although other details of libpq's behavior
make that harder than it sounds. A different line of attack is to
exfiltrate the client's password, or other sensitive data that might
be sent early in the session. That has been shown to be possible with
a server vulnerable to CVE-2021-23214.
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23222
The server collects up to a bufferload of data whenever it reads data
from the client socket. When SSL or GSS encryption is requested
during startup, any additional data received with the initial
request message remained in the buffer, and would be treated as
already-decrypted data once the encryption handshake completed.
Thus, a man-in-the-middle with the ability to inject data into the
TCP connection could stuff some cleartext data into the start of
a supposedly encryption-protected database session.
This could be abused to send faked SQL commands to the server,
although that would only work if the server did not demand any
authentication data. (However, a server relying on SSL certificate
authentication might well not do so.)
To fix, throw a protocol-violation error if the internal buffer
is not empty after the encryption handshake.
Our thanks to Jacob Champion for reporting this problem.
Security: CVE-2021-23214
In v14, because we don't have a field in RestrictInfo to cache both the
left and right type's hash equality operator, we just restrict the scope
of Memoize to only when the left and right types of a RestrictInfo are the
same.
In master we add another field to RestrictInfo and cache both hash
equality operators.
Reported-by: Jaime Casanova
Author: David Rowley
Discussion: https://postgr.es/m/20210929185544.GB24346%40ahch-to
Backpatch-through: 14
Quite a few buildfarm animals are warning about this, and lapwing
is actually failing (because -Werror). It's a false positive AFAICS,
so no need to do more than zero the variable to start with.
Discussion: https://postgr.es/m/YYXJnUxgw9dZKxlX@paquier.xyz
Re-ordering the #include's is a bit problematic here because
libpq/libpq-be.h needs to include <openssl/ssl.h>. Instead,
let's #undef the unwanted macro after all the #includes.
This is definitely uglier than the other way, but it should
work despite possible future header rearrangements.
(A look at the openssl headers indicates that X509_NAME is the
only conflicting symbol that we use.)
In passing, remove a related but long-incorrect comment in
pg_backup_archiver.h.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Since 8162464a25 we do so in win32_port.h. But it likely didn't do much
before that either, because at that point windows.h was already included via
win32_port.h.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/612842.1636237461@sss.pgh.pa.us
Commit db7d1a7b0 pulled out Mkvcbuild.pm's custom support for building
contrib/pgcrypto, but neglected to inform it that that module can now
be built normally. Or at least I guess it can now be built normally.
But this is definitely causing bowerbird to fail, since it's trying to
test a module it hasn't built.
The tsvector data type has always forbidden lexemes to be empty.
However, array_to_tsvector() didn't get that memo, and would
allow an empty-string array element to become an empty lexeme.
This could result in dump/restore failures later, not to mention
whatever semantic issues might be behind the original prohibition.
However, other functions that take a plain text input directly as
a lexeme value do not need a similar restriction, because they only
match the string against existing tsvector entries. In particular
it'd be a bad idea to make ts_delete() reject empty strings, since
that is the most convenient way to clean up any bad data that might
have gotten into a tsvector column via this bug.
Reflecting on that, let's also remove the prohibition against NULL
array elements in tsvector_delete_arr and tsvector_setweight_by_filter.
It seems more consistent to ignore them, as an empty-string element
would be ignored.
There's a case for back-patching this, since it's clearly a bug fix.
On balance though, it doesn't seem like something to change in a
minor release.
Jean-Christophe Arnu
Discussion: https://postgr.es/m/CAHZmTm1YVndPgUVRoag2WL0w900XcoiivDDj-gTTYBsG25c65A@mail.gmail.com
After further investigation, it seems the cause of the problem
is our recent decision to start defining WIN32_LEAN_AND_MEAN.
That causes <windows.h> to no longer include <wincrypt.h>, which
means that the OpenSSL headers are unable to prevent conflicts
with that header by #undef'ing the conflicting macros. Apparently,
some other system header that be-secure-openssl.c #includes after
the OpenSSL headers is pulling in <wincrypt.h>. It's obscure just
where that happens and why we're not seeing it on other Windows
buildfarm animals. However, it should work to move the OpenSSL
#includes to the end of the list. For the sake of future-proofing,
do likewise in fe-secure-openssl.c. In passing, remove useless
double inclusions of <openssl/ssl.h>.
Thanks to Thomas Munro for running down the relevant information.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
Currently, lastOverflowedXid is never reset. It's just adjusted on new
transactions known to be overflowed. But if there are no overflowed
transactions for a long time, snapshots could be mistakenly marked as
suboverflowed due to wraparound.
This commit fixes this issue by resetting lastOverflowedXid when needed
altogether with KnownAssignedXids.
Backpatch to all supported versions.
Reported-by: Stan Hu
Discussion: https://postgr.es/m/CAMBWrQ%3DFp5UAsU_nATY7EMY7NHczG4-DTDU%3DmCvBQZAQ6wa2xQ%40mail.gmail.com
Author: Kyotaro Horiguchi, Alexander Korotkov
Reviewed-by: Stan Hu, Simon Riggs, Nikolay Samokhvalov, Andrey Borodin, Dmitry Dolgov
Commit 23a1c6578 thought it'd be cute to refactor
pg_basebackup/Makefile with a new variable BBOBJS,
but our MSVC build system knows nothing of that.
Per buildfarm.
When calculating distance between float4/float8 values, we need to be a
bit more careful about NaN values in order not to trigger assert. We
consider NaN values to be equal (distace 0.0) and in infinite distance
from all other values.
On builds without asserts, this issue is mostly harmless - the ranges
may be merged in less efficient order, but the index is still correct.
Per report from Andreas Seltenreich. Backpatch to 14, where this new
BRIN opclass was introduced.
Reported-by: Andreas Seltenreich
Discussion: https://postgr.es/m/87r1bw9ukm.fsf@credativ.de
Tom Lane
Daniel Gustafsson
Peter Eisentraut
Michael Paquier
Alvaro Herrera
Robert Haas
Amit Kapila
Peter Geoghegan
Noah Misch
Jeff Davis
David Rowley
Andres Freund
Alexander Korotkov
Tomas Vondra