If any of these commands fail during editing or pre-processing, the
command stored in the query buffer would remain around without being
executed immediately as PSQL_CMD_ERROR is returned as status. The next
command provided by the user would run it, likely causing failures as
this could include silently some of the contents generated automatically
for views or functions.
The problems would be different depending on the psql meta-command used:
- For \ev and \ef, some errors can happen in a predictable way while
doing an object lookup or while creating an object command. A failure
while editing is equally problematic, but the class of failures
happening in the code path of do_edit() are unlikely. The query reset
is kept in exec_command_ef_ev() as a query may be unchanged.
- For \e, error can happen while editing.
In both cases, the query buffer is reset on error for an incorrect file
number provided, whose value check is done before filling up the query
buffer.
This is a slight change of behavior compared to the past for some of the
predictable error patterns for \ev and \ef, so for now I have made the
choice to not backpatch this commit (argument particularly available for
v11 that's going to be EOL'd soon). Perhaps this could be revisited
later depending on the feedback of this new behavior.
Author: Ryoga Yoshida, Michael Paquier
Reviewed-by: Aleksander Alekseev, Kyotaro Horiguchi
Discussion: https://postgr.es/m/01419622d84ef093fd4fe585520bf03c@oss.nttdata.com
Presently, parallel restores spend a lot of time sorting this list
so that we pick the largest items first. With many tables, this
sorting can become a significant bottleneck. There are a couple of
reports from the field about this, and it is easy to reproduce.
This commit improves the performance of parallel pg_restore with
many tables by converting its ready_list to a priority queue, i.e.,
a binary heap. We will first try to run the highest priority item,
but if it cannot be chosen due to the lock heuristic, we'll do a
sequential scan through the heap nodes until we find one that is
runnable. This means that we might end up picking an item with a
much lower priority. However, we expect that we will typically be
able to pick one of the first few items, which should usually have
a relatively high priority.
Suggested-by: Tom Lane
Tested-by: Pierre Ducroquet
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
When a snapshot file fails to be read in ImportSnapshot(), it would
issue an ERROR as "invalid snapshot identifier" when opening a stream
for it in read-only mode. The error handling is improved to be more
talkative in failure cases:
- If a snapshot identifier uses incorrect characters, complain with the
same error as before this commit.
- If the snapshot file cannot be found in pg_snapshots/, complain with a
"snapshot \"foo\" does not exist" instead. This maps to the case where
AllocateFile() fails on ENOENT. Based on a suggestion from Andres
Freund.
- If AllocateFile() throws something else than ENOENT as errno, report
it with more details in %m instead, as these failures are never
expected.
b29504eeb489 was the first improvement take. The older error message
exists since bb446b689b that introduced snapshot imports. Two test
cases are added to cover the cases of an identifier with an incorrect
format and of a missing snapshot.
Author: Bharath Rupireddy
Reviewed-by: Andres Freund, Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWmr=3KdxDkm8h7Zn1XxBoF6hdzq8WQyMn2y1OL5RYFrg@mail.gmail.com
PLy_elog() was not able to handle correctly cases where a SPI called
failed, which would fill in a DETAIL string able to trigger an
assertion. We may want to improve this infrastructure so as it is able
to provide any extra detail information provided by an error stack, but
this is left as a future improvement as it could impact existing error
stacks and any applications that depend on them. For now, the assertion
is removed and a regression test is added to cover the case of a failure
with a detail string.
This problem exists since 2bd78eb8d5, so backpatch all the way down
with tweaks to the regression tests output added where required.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/18070-ab9c171cbf4ebb0f@postgresql.org
Backpatch-through: 11
This commit introduces binaryheap_remove_node(), which can be used
to remove any node from a binary heap. The implementation is
straightforward. The target node is replaced with the last node in
the heap, and then we sift as needed to preserve the heap property.
This new function is intended for use in a follow-up commit that
will improve the performance of pg_restore.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
There are a couple of places in frontend code that could make use
of this simple binary heap implementation. This commit makes
binaryheap usable in frontend code, much like commit 26aaf97b68 did
for StringInfo. Like StringInfo, the header file is left in lib/
to reduce the likelihood of unnecessary breakage.
The frontend version of binaryheap exposes a void *-based API since
frontend code does not have access to the Datum definitions. This
seemed like a better approach than switching all existing uses to
void * or making the Datum definitions available to frontend code.
Reviewed-by: Tom Lane, Alvaro Herrera
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
cursor_to_xmlschema() assumed that any Portal must have a tupDesc,
which is not so. Add a defensive check.
It's plausible that this mistake occurred because of the rather
poorly chosen name of the lookup function SPI_cursor_find(),
which in such cases is returning something that isn't very much
like a cursor. Add some documentation to try to forestall future
errors of the same ilk.
Report and patch by Boyu Yang (docs changes by me). Back-patch
to all supported branches.
Discussion: https://postgr.es/m/dd343010-c637-434c-a8cb-418f53bda3b8.yangboyu.yby@alibaba-inc.com
It was reported as misaligned by Kyotaro, but it also needed to be
turned into a single translatable phrase (like the one for \g is), as
reported by Yugo.
This is a new issue (commit f347ec76e2), so no backpatch is needed.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20230907.142956.2038600444404289870.horikyota.ntt@gmail.com
Between Unicode 15.0.0 and 15.1.0, the whitespace in
EastAsianWidth.txt has changed a bit, such as from
0020;Na # Zs SPACE
to
0020 ; Na # Zs SPACE
with space around the semicolon. Adjust the script to be able to
parse that.
expandRecordVariable() failed to adjust the parse nesting structure
correctly when recursing to inspect an outer-level Var. This could
result in assertion failures or core dumps in corner cases.
Likewise, get_name_for_var_field() failed to adjust the deparse
namespace stack correctly when recursing to inspect an outer-level
Var. In this case the likely result was a "bogus varno" error
while deparsing a view.
Per bug #18077 from Jingzhou Fu. Back-patch to all supported
branches.
Richard Guo, with some adjustments by me
Discussion: https://postgr.es/m/18077-b9db97c6e0ab45d8@postgresql.org
When tracking IO timing for WAL, the duration is what we calculate
based on the start and end timestamps, it's not what the variable
contains. Rename the timestamp variable to end to better communicate
what it contains. Original patch by Krishnakumar with additional
hacking to fix another occurrence by me.
Author: Krishnakumar R <kksrcv001@gmail.com>
Discussion: https://postgr.es/m/CAPMWgZ9f9o8awrQpjo8oxnNQ=bMDVPx00NE0QcDzvHD_ZrdLPw@mail.gmail.com
This became safe after commit 4b4798e138. The smgrcreate() call will
now register the segment for syncing at the next checkpoint, so we
don't need to sync it here. If a checkpoint happens before the
creation is WAL-logged, the records will be replayed when starting
recovery from the checkpoint. If a checkpoint happens after the WAL
logging, the checkpoint will fsync() it.
In the passing, clarify a comment in smgrDoPendingSyncs().
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9%40iki.fi
Reviewed-by: Robert Haas
The majority of all filenames are quoted in user facing error and
log messages, but a few were still printed without quotes. While
these filenames do not risk causing any ambiguity as their format
is strict, quote them anyways to be consistent across all logs.
Also concatenate a message to keep it one line to make it easier
to grep for in the code.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/080EEABE-6645-4A46-AB20-6285ADAC44FE@yesql.se
This reverts commit a0d87bcd9b, following a remark from Andres Frend
that the new error can be triggered with an incorrect SET TRANSACTION
SNAPSHOT command without being really helpful for the user as it uses
the internal file name.
Discussion: https://postgr.es/m/20230914020724.hlks7vunitvtbbz4@awork3.anarazel.de
Backpatch-through: 11
It's entirely possible for a logical slot to have a confirmed_flush LSN
higher than the last value saved on disk while not being marked as dirty.
Currently, it is not a major problem but a later patch adding support for
the upgrade of slots relies on that value being properly flushed to disk.
It can also help avoid processing the same transactions again in some
boundary cases after the clean shutdown and restart. Say, we process
some transactions for which we didn't send anything downstream (the
changes got filtered) but the confirm_flush LSN is updated due to
keepalives. As we don't flush the latest value of confirm_flush LSN, it
may lead to processing the same changes again without this patch.
The approach taken by this patch has been suggested by Ashutosh Bapat.
Author: Vignesh C, Julien Rouhaud, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Michael Paquier, Ashutosh Bapat, Peter Smith, Hou Zhijie
Discussion: http://postgr.es/m/CAA4eK1JzJagMmb_E8D4au=GYQkxox0AfNBm1FbP7sy7t4YWXPQ@mail.gmail.com
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
Karina figured out that I (Andres) confused BufferUsage.temp_blks_written with
BufferUsage.local_blks_written in fcdda1e4b5.
Tests in core PG can't easily test this, as BufferUsage is just used for
EXPLAIN (ANALYZE, BUFFERS) and pg_stat_statements. Thus this commit adds tests
for this to pg_stat_statements.
Reported-by: Karina Litskevich <litskevichkarina@gmail.com>
Author: Karina Litskevich <litskevichkarina@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CACiT8ibxXA6+0amGikbeFhm8B84XdQVo6D0Qfd1pQ1s8zpsnxQ@mail.gmail.com
Backpatch: 16-, where fcdda1e4b5 was merged
When a snapshot file fails to be read in ImportSnapshot(), it would
issue an ERROR as "invalid snapshot identifier" when opening a stream
for it in read-only mode. This error message is reworded to be the same
as all the other messages used in this case on failure, which is useful
when debugging this area.
Thinko introduced by bb446b689b where snapshot imports have been
added. A backpatch down to 11 is done as this can improve any work
related to snapshot imports in older branches.
Author: Bharath Rupireddy
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CALj2ACWmr=3KdxDkm8h7Zn1XxBoF6hdzq8WQyMn2y1OL5RYFrg@mail.gmail.com
Backpatch-through: 11
These code paths should not be reached normally, but if they are an
error with "(null)" as information for the collation provider would show
up if no locale is set, while we can assume that we are referring to
libc.
This refactors the code so as the provider is always reported even if no
locale is set. The name of the function where the error happens is
added, while on it, as it can be helpful for debugging.
Issue introduced by d87d548cd0, so backpatch down to 16.
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Jeff Davis, Kyotaro Horiguchi
Discussion: https://postgr.es/m/7073610042fcf97e1bea2ce08b7e0214b5e11094.camel@j-davis.com
Backpatch-through: 16
Both 50e17ad28 and 29f45e299 mistakenly tried to record a plan dependency
on a function but mistakenly inverted the OidIsValid test. This meant
that we'd record a dependency only when the function's Oid was
InvalidOid. Clearly this was meant to *not* record the dependency in
that case.
50e17ad28 made this mistake first, then in v15 29f45e299 copied the same
mistake.
Reported-by: Tom Lane
Backpatch-through: 14, where 50e17ad28 first made this mistake
Discussion: https://postgr.es/m/2277537.1694301772@sss.pgh.pa.us
If an out-of-memory error was thrown at an unfortunate time,
ensure_record_cache_typmod_slot_exists() could leak memory and leave
behind a global state that produced an infinite loop on the next call.
Fix by merging RecordCacheArray and RecordIdentifierArray into a single
array. With only one allocation or re-allocation, there is no
intermediate state.
Back-patch to all supported releases.
Reported-by: "James Pang (chaolpan)" <chaolpan@cisco.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/PH0PR11MB519113E738814BDDA702EDADD6EFA%40PH0PR11MB5191.namprd11.prod.outlook.com
Previously, the test relied on a trick with a shell to retrieve the PID
of the psql session to be stopped with SIGINT, that was skipped on
Windows. This commit changes the test to use IPC::Run::signal()
instead, which still does not work on Windows, but for a different
reason: SIGINT would stop the test before finishing.
This should allow the test to run on non-Windows platforms where PPID is
not supported (like NetBSD), spreading it a bit more across the
buildfarm. And the logic of the test is simpler.
It is the first time in the tree that IPC::Run::signal() is used, so, as
a matter of safety (or just call that as me having cold feet), no
backpatch is done, at least for now.
Author: Yugo NAGATA
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/20230810125935.22c2922ea5250ba79358965b@sraoss.co.jp
This changes 020_cancel.pl so as the test is entirely skipped on
Windows. This test was already doing nothing under WIN32, except
initializing and starting a node without using it so this shaves a few
test cycles.
Author: Yugo NAGATA
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/20230810125935.22c2922ea5250ba79358965b@sraoss.co.jp
Backpatch-through: 15
The new test added by commit 68a59f9e9 disables the subscription and
manually drops the associated replication slot. However, since
disabling the subsubscription doesn't wait for a walsender to release
the replication slot and exit, pg_drop_replication_slot() could
fail. Avoid failure by adding a wait for the replication slot to
become inactive.
Reported-by: Hou Zhijie, as per buildfarm
Reviewed-by: Hou Zhijie
Discussion: https://postgr.es/m/OS0PR01MB571682316378379AA34854F694E9A%40OS0PR01MB5716.jpnprd01.prod.outlook.com
Backpatch-through: 15
generation_counter includes time spent on both JIT:ing expressions
and tuple deforming which are configured independently via options
jit_expressions and jit_tuple_deforming. As they are combined in
the same counter it's not apparent what fraction of time the tuple
deforming takes.
This adds deform_counter dedicated to tuple deforming, which allows
seeing more directly the influence jit_tuple_deforming is having on
the query. The counter is exposed in EXPLAIN and pg_stat_statements
bumpin pg_stat_statements to 1.11.
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20220612091253.eegstkufdsu4kfls@erthalion.local
The WAIT_USE_WIN32 implementation of WaitEventSetWait() previously
reported at most one event per call, because that's what the underlying
WaitForMultipleObjects() call does.
We can make the behavior match the three Unix implementations by looping
until our output buffer is full, or there are no more events available
now. This makes no difference to most callers including the regular
FEBE socket code, since they ask for at most one event anyway. A
difference in socket accept priority might be perceived by end users
after commit 7389aad6 started using WaitEventSet in the postmaster.
With this commit, the accept order now matches Unix systems, servicing
listening sockets in round-robin order.
We decided it wasn't really a bug or worth back-patching, but it seems
good to align the behavior across platforms.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Tested-by: "Wei Wang (Fujitsu)" <wangw.fnst@fujitsu.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BA2dk29hr5zRP3HVJQ-_PncNJM6HVQ7aaYLXLRBZU-xw%40mail.gmail.com
Now that ATExecDropConstraint doesn't recurse anymore, so it's wrong to
test privileges "during recursion" there. Move the check to
dropconstraint_internal, which is the place where recursion occurs.
In passing, remove now-useless 'recursing' argument to
ATExecDropConstraint.
Discussion: https://postgr.es/m/202309051744.y4mndw5gwzhh@alvherre.pgsql
Now that we have catalogued not-null constraints, our information_schema
definition can be updated to grab those rather than fabricate synthetic
definitions.
Note that we still don't have catalog rows for not-null constraints on
domains, but we've never had not-null constraints listed in
information_schema, so that's a problem to be solved separately.
Co-authored-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/81b461c4-edab-5d8c-2f88-203108425340@enterprisedb.com
Discussion: https://postgr.es/m/202309041710.psytrxlsiqex@alvherre.pgsql
pgbouncer can cause PQbackendPID() to return negative values due to it
filling be_pid with random bytes (even these days pid_max can only be
set up to 2^22 on 64b machines on Linux, for example, so this cannot
happen with normal PID numbers). When this happens, pg_basebackup may
generate a temporary slot name that may not be accepted by the parser,
leading to spurious failures, like:
pg_basebackup: error: could not send replication command
ERROR: replication slot name "pg_basebackup_-1201966863" contains
invalid character
This commit fixes that problem by formatting the result from
PQbackendPID() as an unsigned integer when creating the temporary
replication slot name, so as the invalid character is gone and the
command can be parsed.
Author: Jelte Fennema
Reviewed-by: Daniel Gustafsson, Nishant Sharma
Discussion: https://postgr.es/m/CAGECzQQOGvYfp8ziF4fWQ_o8s2K7ppaoWBQnTmdakn3s-4Z=5g@mail.gmail.com
Backpatch-through: 11
Where the test wants a VACUUM command to generate WAL that would
conflict with a session on the standby, it could transiently fail to do
so if it couldn't acquire a cleanup lock conditionally at that moment on
the primary. VACUUM FREEZE will wait, so use that instead.
No back-patch for now, but that will be needed if/when the test is
re-enabled in back-branches.
Suggested-by: Andres Freund <andres@anarazel.de>
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/20230812210006.ei7tutzwcr5svyt6%40awork3.anarazel.de
We shouldn't be doing non-trivial work in signal handlers in general,
and in this case the handler could reach unsafe code and corrupt state.
It also clobbered its own "reason" code.
Move all recovery conflict decision logic into the next
CHECK_FOR_INTERRUPTS(), and have the signal handler just set flags and
the latch, following the standard pattern. Since there are several
different "reasons", use a separate flag for each.
With this refactoring, the recovery conflict system no longer
piggy-backs on top of the regular query cancelation mechanism, but
instead raises an error directly if it decides that is necessary. It
still needs to respect QueryCancelHoldoffCount, because otherwise the
FEBE protocol might get out of sync (see commit 2b3a8b20c2).
This fixes one class of intermittent failure in the new
031_recovery_conflict.pl test added by commit 9f8a050f, though the buggy
coding is much older. Failures outside contrived testing seem to be
very rare (or perhaps incorrectly attributed) in the field, based on
lack of reports.
No back-patch for now due to complexity and release schedule. We have
the option to back-patch into 16 later, as 16 has prerequisite commit
bea3d7e.
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier version)
Reviewed-by: Michael Paquier <michael@paquier.xyz> (earlier version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Tested-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
Discussion: https://postgr.es/m/CALj2ACVr8au2J_9D88UfRCi0JdWhyQDDxAcSVav0B0irx9nXEg%40mail.gmail.com
This commit allows specifying a --sync-method in several frontend
utilities that must synchronize many files to disk (initdb,
pg_basebackup, pg_checksums, pg_dump, pg_rewind, and pg_upgrade).
On Linux, users can specify "syncfs" to synchronize the relevant
file systems instead of calling fsync() for every single file. In
many cases, using syncfs() is much faster.
As with recovery_init_sync_method, this new option comes with some
caveats. The descriptions of these caveats have been moved to a
new appendix section in the documentation.
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier, Thomas Munro, Robert Haas, Justin Pryzby
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit adds support for using syncfs() in fsync_pgdata() and
fsync_dir_recurse() (which have been renamed to sync_pgdata() and
sync_dir_recurse()). Like recovery_init_sync_method,
sync_pgdata() calls syncfs() for the data directory, each
tablespace, and pg_wal (if it is a symlink). For now, all of the
frontend utilities that use these support functions are hard-coded
to use fsync(), but a follow-up commit will allow specifying
syncfs().
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
This commit renames RecoveryInitSyncMethod to DataDirSyncMethod and
moves it to common/file_utils.h. This is preparatory work for a
follow-up commit that will allow specifying the synchronization
method in frontend utilities such as pg_upgrade and pg_basebackup.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZN2ZB4afQ2JbR9TA%40paquier.xyz
This file is now made of two columns, removing the column listing the
user-visible strings used in the system views and the documentation:
- Enum definitions for each class without the prefix "WAIT_EVENT_", so
as this information can be grepped in the code and wait_event_names.txt
at the same time.
- Description in the documentation.
The wait event names are now generated from the enum objects in
CamelCase, with the underscores removed. The data generated for wait
events is consistent with what was produced by 414f6c0fb7.
This has the advantage to remove WAIT_EVENT_DOCONLY, which was a
placeholder for the wait event types Lock and LWLock as these two only
require the generation of the documentation.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/ZOxVHQwEC/9X/p/z@paquier.xyz
The event names use the same case-insensitive characters, hence applying
lower() or upper() to the monitoring queries allows the detection of the
same events as before this change. It is possible to cross-check the
data with the system view pg_wait_events, for instance, with a query
like that showing no differences:
SELECT lower(type), lower(name), description
FROM pg_wait_events ORDER BY 1, 2;
This will help in the introduction of more simplifications in the format
of wait_event_names. Some of the enum values in the code had to be
renamed a bit to follow the same convention naming across the board.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/ZOxVHQwEC/9X/p/z@paquier.xyz
Presently, frontend code that needs to use these macros must either
include storage/fd.h, which declares several frontend-unsafe
functions, or duplicate the macros. This commit moves these macros
to common/file_utils.h, which is safe for both frontend and backend
code. Consequently, we can also remove the duplicated macros in
pg_checksums and stop including storage/fd.h in pg_rewind.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/ZOP5qoUualu5xl2Z%40paquier.xyz
This lock was introduced before memory barrier support was added,
and it is only used to guarantee proper memory ordering when
KnownAssignedXidsAdd() appends to the array without a lock. Now
that such memory barrier support exists, we can remove the lock and
use barriers instead.
Suggested-by: Tom Lane
Author: Michail Nikolaev
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/CANtu0oh0si%3DjG5z_fLeFtmYcETssQ08kLEa8b6TQqDm_cinroA%40mail.gmail.com
If all the bits of a key in a tsvector are true (marked with ALLISTRUE),
gtsvectorout() would show the following description:
"0 true bits, 0 false bits"
This is confusing, as all the bits are true, but this would be
equivalent to the information if siglen is 0.
This commit improves the output so as "all true bits" show instead in
this case. Alexander has proposed a regression test for pageinspect,
not included here as it is rather expensive compared to its coverage
value.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/17950-6c80a8d2b94ec695@postgresql.org
This could lead to an imprecise choice when splitting an index page of a
GiST index on a tsvector, deciding which entries should remain on the
old page and which entries should move to a new page.
This is wrong since tsearch2 has been moved into core with commit
140d4ebcb4, so backpatch all the way down. This error has been
spotted by valgrind.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/17950-6c80a8d2b94ec695@postgresql.org
Backpatch-through: 11
Dropping a database while a connection is attempted on it was able to
lead to the presence of valid database entries in shared statistics.
The issue is that MyDatabaseId was getting set too early than it should,
as, if the connection attempted on the dropped database fails when
renamed or dropped, the shutdown callback of the shared statistics would
finish by re-inserting a correct entry related to the database already
dropped.
As analyzed by the bug reporters, this issue could lead to phantom
entries in the database list maintained by the autovacuum launcher
(in rebuild_database_list()) if the database dropped was part of the
database list when it was still valid. After the database was dropped,
it would remain the highest on the list of databases to considered by
the autovacuum worker as things to process. This would prevent
autovacuum jobs to happen on all the other databases still present.
The commit fixes this issue by delaying setting MyDatabaseId until the
database existence has been re-checked with the second scan on
pg_database after getting a shared lock on it, and by switching
pgstat_update_dbstats() so as nothing happens if MyDatabaseId is not
valid.
Issue introduced by 5891c7a8ed, so backpatch down to 15.
Reported-by: Will Mortensen, Jacob Speidel
Analyzed-by: Will Mortensen, Jacob Speidel
Author: Andres Freund
Discussion: https://postgr.es/m/17973-bca1f7d5c14f601e@postgresql.org
Backpatch-through: 15
When a partitioned table has a primary key, trying to find the
corresponding not-null constraint for that column would come up empty,
causing code that's trying to check said not-null constraint to crash.
Fix by only running the check when the not-null constraint exists.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d57b4a69-7394-3146-5976-9a1ef27e7972@gmail.com
The comment in heapgettup_advance_block() says that it reports the
scan position before checking for end of scan, but that didn't match
the code. The code was refactored in commit 7ae0ab0ad9, which
inadvertently changed the order of the check and reporting. Change it
back.
This caused a few regression test failures with a small shared_buffers
setting like 10 MB. The 'portals' and 'cluster' tests perform seqscans
that are large enough that sync seqscans kick in. When the sync scan
position is not updated at end of scan, the next seq scan doesn't
start at the beginning of the table, and the test queries are
sensitive to that.
Reviewed-by: Melanie Plageman, David Rowley
Discussion: https://www.postgresql.org/message-id/6f991389-ae22-d844-a9d8-9aceb7c01a9a@iki.fi
Backpatch-through: 16
There was some confusion in the ObjectProperty entry for transforms.
Some fields had values that were apparently meant for a different
field. Also, some fields were not assigned, which is okay for most
fields, but not for all. In particular, for .oid_catcache_id,
.name_catcache_id, and .objtype, zero is a valid value, so we need to
use -1 if not applicable. It has apparently been like that from the
very beginning (commit cac7658205). The faulty values were not
actually reachable, so it's not a big problem in practice, but we
should make it correct.
Discussion: https://www.postgresql.org/message-id/flat/75ae5875-3abc-dafc-8aec-73247ed41cde@eisentraut.org
The code is able to compile already without warnings under
-Wshadow=compatible-local, which is itself already enabled in the tree,
and the ones fixed here showed up with the more restrictive -Wshadow.
There are more of these that we may want to look at, and the ones fixed
here made the code confusing.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+PuR0y4ofNOxi691VTVWmBfScHV9AaBMGSpeh8+DKp81Nw@mail.gmail.com
Unlike the other pg_stat_get_backend* functions,
pg_stat_get_backend_subxact() looks up the backend entry by using
its integer argument as a 1-based index in an internal array. The
other functions look for the entry with the matching session
backend ID. These numbers often match, but that isn't reliably
true.
This commit resolves this discrepancy by introducing
pgstat_get_local_beentry_by_backend_id() and using it in
pg_stat_get_backend_subxact(). We cannot use
pgstat_get_beentry_by_backend_id() because it returns a
PgBackendStatus, which lacks the locally computed additions
available in LocalPgBackendStatus that are required by
pg_stat_get_backend_subxact().
Author: Ian Barwick
Reviewed-by: Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
Presently, pgstat_fetch_stat_beentry() accepts a session's backend
ID as its argument, and pgstat_fetch_stat_local_beentry() accepts a
1-based index in an internal array as its argument. The former is
typically used wherever a user must provide a backend ID, and the
latter is usually used internally when looping over all entries in
the array. This difference was first introduced by d7e39d72ca.
Before that commit, both functions accepted a 1-based index to the
internal array.
This commit renames these two functions to make it clear whether
they use the backend ID or the 1-based index to look up the entry.
This is preparatory work for a follow-up change that will introduce
a function for looking up a LocalPgBackendStatus using a backend
ID.
Reviewed-by: Ian Barwick, Sami Imseih, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/CAB8KJ%3Dj-ACb3H4L9a_b3ZG3iCYDW5aEu3WsPAzkm2S7JzS1Few%40mail.gmail.com
Backpatch-through: 16
Previously when client was aborted due to some error during
benchmarking, other clients continued their run until certain number
of transactions specified -t was reached or the time specified by -T
was expired. At the end, the results are printed with caution: "Run
was aborted; the above results are incomplete" shows.
New option "--exit-on-abort" allows pgbench to exit immediately in
this case so that users could quickly fix the cause of the failure and
try again another round of benchmarking.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii
Discussion: https://postgr.es/m/flat/20230804130325.df32e60879c38c92bca64207%40sraoss.co.jp
nFreeBlocks, defined as a long, stores the number of free blocks in a
logical tape. ltsGetFreeBlock() has been using an int to store the
value of nFreeBlocks, which could lead to overflows on platforms where
long and int are not the same size (in short everything except Windows
where long is 4 bytes).
The problematic intermediate variable is switched to be a long instead
of an int.
Issue introduced by c02fdc9223, so backpatch down to 13.
Author: Ranier vilela
Reviewed-by: Peter Geoghegan, David Rowley
Discussion: https://postgr.es/m/CAEudQApLDWCBR_xmwNjGBrDo+f+S4E87x3s7-+hoaKqYdtC4JQ@mail.gmail.com
Backpatch-through: 13
It makes no sense to add a NO INHERIT not-null constraint to a child
table that already has one in that column inherited from its parent.
Disallow that, and add tests for the relevant cases.
Per complaint from Kyotaro Horiguchi. I also used part of his proposed
patch.
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230828.161658.1184657435220765047.horikyota.ntt@gmail.com
The logical_replication_mode GUC is intended for testing and debugging
purposes, but its current name may be misleading and encourage users to make
unnecessary changes.
To avoid confusion, renaming the GUC to a less misleading name
debug_logical_replication_streaming that casual users are less likely to mistakenly
assume needs to be modified in a regular logical replication setup.
Author: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d672d774-c44b-6fec-f993-793e744f169a%40eisentraut.org
When running a repeat query with \watch in psql, it can be
helpful to be able to stop the watch process when the query
no longer returns the expected amount of rows. An example
would be to watch for the presence of a certain event in
pg_stat_activity and stopping when the event is no longer
present, or to watch an index creation and stop when the
index is created.
This adds a min_rows=MIN parameter to \watch which can be
set to a non-negative integer, and the watch query will
stop executing when it returns less than MIN rows.
Author: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAKAnmmKStATuddYxP71L+p0DHtp9Rvjze3XRoy0Dyw67VQ45UA@mail.gmail.com
While there are numerous instances of using "power of 2" in the code,
translated user-facing messages use "power of two". Fix two instances
which used "power of 2" instead.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20230829.175615.682972421946735863.horikyota.ntt@gmail.com
After commit b0bea38705, syslogger prints 63 warnings about failing to
close a listen socket at postmaster startup. That's because the
syslogger process forks before the ListenSockets array is initialized,
so ClosePostmasterPorts() calls "close(0)" 64 times. The first call
succeeds, because fd 0 is stdin.
This has been like this since commit 9a86f03b4e in version 13, which
moved the SysLogger_Start() call to before initializing ListenSockets.
We just didn't notice until commit b0bea38705 added the LOG message.
Reported by Michael Paquier and Jeff Janes.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZOvvuQe0rdj2slA9%40paquier.xyz
Discussion: https://www.postgresql.org/message-id/ZO0fgDwVw2SUJiZx@paquier.xyz#482670177eb4eaf4c9f03c1eed963e5f
Backpatch-through: 13
Since its introduction in 10074651e3, pg_promote() has been returning
a false status in three cases:
- SIGUSR1 not sent to the postmaster process.
- Postmaster death during standby promotion.
- Standby not promoted within the specified wait time.
An application calling this function will have a hard time understanding
what a false state returned actually means.
Per discussion, this switches the two first states to fail rather than
return a "false" status, making the second case more consistent with the
existing CHECK_FOR_INTERRUPTS in the wait loop. False is only returned
when the promotion is not completed within the specified time (60s by
default).
Author: Ashutosh Sharma
Reviewed-by: Fujii Masao, Laurenz Albe, Michael Paquier
Discussion: https://postgr.es/m/CAE9k0P=QTrwptL0t4J0fuBRDDjgsT-0PVKd-ikd96i1hyL7Bcg@mail.gmail.com
Make the primary messages more compact and make the detail messages
uniform. In initdb.c and pg_resetwal.c, use the newish
option_parse_int() to simplify some of the option parsing. For the
backend GUC wal_segment_size, add a GUC check hook to do the
verification instead of coding it in bootstrap.c. This might be
overkill, but that way the check is in the right place and it becomes
more self-documenting.
In passing, make pg_controldata use the logging API for warning
messages.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/9939aa8a-d7be-da2c-7715-0a0b5535a1f7@eisentraut.org
OpenSSL in FIPS mode rejects several encrypted private keys used in
the test suites ssl and ssl_passphrase_callback. This is because they
are in a "traditional" OpenSSL format that uses MD5 for key
generation. The fix is to convert them to the more standard PKCS#8
format that uses SHA1 for key derivation.
This commit contains the converted keys, with the conversion done like
this:
openssl pkcs8 -topk8 -in src/test/modules/ssl_passphrase_callback/server.key -passin pass:FooBaR1 -out src/test/modules/ssl_passphrase_callback/server.key.new -passout pass:FooBaR1
mv src/test/modules/ssl_passphrase_callback/server.key.new src/test/modules/ssl_passphrase_callback/server.key
etc., as well as updated build rules to generate the keys in the new
format if they need to be regenerated.
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/64de784b-8833-e055-3bd4-7420e6675351%40eisentraut.org
Interval values now generate an error when the user has multiple
consecutive units or a unit without a value. Previously, it was
possible to specify multiple units consecutively which is contrary to
what the documentation allows, so it was possible to finish with
confusing interval values.
This is a follow-up of the work done in 165d581f14.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
This commit Restrict the unit "ago" to only appear at the end of the
interval. According to the documentation, a direction can only be
defined at the end of an interval, but it was possible to define it in
the middle of the string or define it multiple times.
In spirit, this is similar to the error handling improvements done in
5b3c595355 or bcc704b524.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
This commit removes some dead code related to the unit type RESERV,
whose last use has been removed from the unit lookup table used for
intervals ("deltatktbl" in datetime.c) in 666cbae16d. Before that,
RESERV was used as an equivalent of "invalid", but that's now
unreachable.
Author: Joseph Koshakow
Reviewed-by: Jacob Champion, Gurjeet Singh, Reid Thompson
Discussion: https://postgr.es/m/CAAvxfHd-yNO+XYnUxL=GaNZ1n+eE0V-oE0+-cC1jdjdU0KS3iw@mail.gmail.com
This commit switches query jumbling so as prepared statement names are
treated as constants in DeallocateStmt. A boolean field is added to
DeallocateStmt to make a distinction between ALL and named prepared
statements, as "name" was used to make this difference before, NULL
meaning DEALLOCATE ALL.
Prior to this commit, DEALLOCATE was not tracked in pg_stat_statements,
for the reason that it was not possible to treat its name parameter as a
constant. Now that query jumbling applies to all the utility nodes,
this reason does not apply anymore.
Like 638d42a3c5, this can be a huge advantage for monitoring where
prepared statement names are randomly generated, preventing bloat in
pg_stat_statements. A couple of tests are added to track the new
behavior.
Author: Dagfinn Ilmari Mannsåker, Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
Adding an extra LOG for connections that have not set an authn ID, like
when the "trust" authentication method is used, is useful for audit
purposes.
A couple of TAP tests for SSL and authentication need to be tweaked to
adapt to this new LOG generated, as some scenarios expected no logs but
they now get a hit.
Reported-by: Shaun Thomas
Author: Jacob Champion
Reviewed-by: Robert Haas, Michael Paquier
Discussion: https://postgr.es/m/CAFdbL1N7-GF-ZXKaB3XuGA+CkSmnjFvqb8hgjMnDfd+uhL2u-A@mail.gmail.com
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557ae, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Commit 2a8b40e36 introduces the worker type field for logical replication
workers, but forgot to reset the type when the worker exits. This can lead
to recognizing a stopped worker as a valid logical replication worker.
Fix it by resetting the worker type and additionally adding the safeguard
to not use LogicalRepWorker until ->in_use is verified.
Reported-by: Thomas Munro based on cfbot reports.
Author: Hou Zhijie, Alvaro Herrera
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CA+hUKGK2RQh4LifVgBmkHsCYChP-65UwGXOmnCzYVa5aAt4GWg@mail.gmail.com
When running all (or just many) of our tests, a significant portion of both
CPU time and IO is spent running initdb. Most of those initdb runs don't
specify any options influencing properties of the created data directory.
Avoid most of that overhead by creating a "template" data directory, alongside
the temporary installation. Instead of running initdb, pg_regress and tap
tests can copy that data directory. When a tap test specifies options to
initdb, the template data directory is not used. That could be relaxed for
some options, but it's not clear it's worth the effort.
There unfortunately is some duplication between pg_regress.c and Cluster.pm,
but there are no easy ways of sharing that code without introducing additional
complexity.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20220120021859.3zpsfqn4z7ob7afz@alap3.anarazel.de
Commit 7b378237aa added a status message to pg_upgrade that is 60
characters wide. Since the MESSAGE_WIDTH macro is currently set to
60, there is no space between this new status message and the "ok"
or "failed" indicator appended when the step completes. To fix
this problem, this commit increases the value of MESSAGE_WIDTH to
62.
Suggested-by: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/CALj2ACVVvk1cYLtWVxHv%3DZ1Ubq%3DUES9fhKbUU4c9k4W%2BfEDnbw%40mail.gmail.com
Backpatch-through: 16
Revalidation of a plancache entry (after a cache invalidation event)
requires acquiring a snapshot. Normally that is harmless, but not
if the cached statement is one that needs to run without acquiring a
snapshot. We were already aware of that for TransactionStmts,
but for some reason hadn't extrapolated to the other statements that
PlannedStmtRequiresSnapshot() knows mustn't set a snapshot. This can
lead to unexpected failures of commands such as SET TRANSACTION
ISOLATION LEVEL. We can fix it in the same way, by excluding those
command types from revalidation.
However, we can do even better than that: there is no need to
revalidate for any statement type for which parse analysis, rewrite,
and plan steps do nothing interesting, which is nearly all utility
commands. To mechanize this, invent a parser function
stmt_requires_parse_analysis() that tells whether parse analysis does
anything beyond wrapping a CMD_UTILITY Query around the raw parse
tree. If that's what it does, then rewrite and plan will just
skip the Query, so that it is not possible for the same raw parse
tree to produce a different plan tree after cache invalidation.
stmt_requires_parse_analysis() is basically equivalent to the
existing function analyze_requires_snapshot(), except that for
obscure reasons that function omits ReturnStmt and CallStmt.
It is unclear whether those were oversights or intentional.
I have not been able to demonstrate a bug from not acquiring a
snapshot while analyzing these commands, but at best it seems mighty
fragile. It seems safer to acquire a snapshot for parse analysis of
these commands too, which allows making stmt_requires_parse_analysis
and analyze_requires_snapshot equivalent.
In passing this fixes a second bug, which is that ResetPlanCache
would exclude ReturnStmts and CallStmts from revalidation.
That's surely *not* safe, since they contain parsable expressions.
Per bug #18059 from Pavel Kulakov. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18059-79c692f036b25346@postgresql.org
This code is insufficiently covered by tests, so add a few small test
cases to immortalize its behavior before it gets rewritten completely by
the project to catalog NOT NULL constraints.
It's good hygiene if e.g. an extension launches a subprogram when
being loaded. We went through some effort to close them in the child
process in EXEC_BACKEND mode, but it's better to not hand them down to
the child process in the first place. We still need to close them
after fork when !EXEC_BACKEND, but it's a little simpler.
In the passing, LOG a message if closing the client connection or
listen socket fails. Shouldn't happen, but if it does, would be nice
to know.
Reviewed-by: Tristan Partin, Andres Freund, Thomas Munro
Discussion: https://www.postgresql.org/message-id/7a59b073-5b5b-151e-7ed3-8b01ff7ce9ef@iki.fi
Having argument names makes it easier to understand how to use the
aggregate functions when inspecting them with \dfa or similar.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/877cw3jl8y.fsf@wibble.ilmari.org
The SnapBuildRestoreContents() used a const value in the error message to
indicate the size in bytes it was expecting to read from the serialized
snapshot file. Fix it by reporting the size that was actually passed.
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 16
Discussion: http://postgr.es/m/OS0PR01MB5716D408364F7DF32221C08D941FA@OS0PR01MB5716.jpnprd01.prod.outlook.com
The meson build scripts attempt to find files left over from configure
and fail, mentioning that "make maintainer-clean" should be run to remove
these. This seems to have been done for files generated from configure.
pg_config_paths.h is generated during the actual make build, so seems to
have been missed. This would result in compilation using the wrong
pg_config_paths.h file.
Here we just add this file to generated_sources_ac so that meson errors
out if pg_config_paths.h exists.
Likely this wasn't noticed before because make maintainer-clean will
remove pg_config_paths.h, however, people using the MSVC build scripts
are more likely to run into issues and they have to manually remove
these files and pg_config_paths.h wasn't listed as a conflicting file to
remove in the meson log.
Backpatch-through: 16, where meson support was added
Discussion: https://postgr.es/m/CAApHDvqjYOxZfmLKAOWKFEE7LOr9_E6UA6YNmx9r8nxStcS3gg@mail.gmail.com
See prior commit for an explanation for the goal of the change and why it had
to be split into two commits.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/20230808021541.7lbzdefvma7qmn3w@awork3.anarazel.de
Backpatch: 15-, where CI support was added
getprotobyname returns undefined on some CI machines. It's not clear
why. The code overall still works, but it raises a warning.
In PostgreSQL C code, we always call socket() with 0 for the protocol
argument, so we should be able to do the same in Perl (since the Perl
documentation says that the arguments of the socket function are the
same as in C). So do that, to avoid the issue.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
This commit introduces functions for converting numbers to their
equivalent binary and octal representations. Also, the base
conversion code for these functions and to_hex() has been moved to
a common helper function.
Co-authored-by: Eric Radman
Reviewed-by: Ian Barwick, Dag Lem, Vignesh C, Tom Lane, Peter Eisentraut, Kirk Wolak, Vik Fearing, John Naylor, Dean Rasheed
Discussion: https://postgr.es/m/Y6IyTQQ/TsD5wnsH%40vm3.eradman.com
Some of the ambuildempty functions used smgrwrite() directly, followed
by smgrimmedsync(). A few small problems with that:
Firstly, one is supposed to use smgrextend() when extending a
relation, not smgrwrite(). It doesn't make much difference in
production builds. smgrextend() updates the relation size cache, so
you miss that, but that's harmless because we never use the cached
relation size of an init fork. But if you compile with
CHECK_WRITE_VS_EXTEND, you get an assertion failure.
Secondly, the smgrwrite() calls were performed before WAL-logging, so
the page image written to disk had 0/0 as the LSN, not the LSN of the
WAL record. That's also harmless in practice, but seems sloppy.
Thirdly, it's better to use the buffer cache, because then you don't
need to smgrimmedsync() the relation to disk, which adds latency.
Bypassing the cache makes sense for bulk operations like index
creation, but not when you're just initializing an empty index.
Creation of unlogged tables is hardly performance bottleneck in any
real world applications, but nevertheless.
Backpatch to v16, but no further. These issues should be harmless in
practice, so better to not rock the boat in older branches.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9@iki.fi
The new_cluster parameter in check_for_new_tablespace_dir was
shadowing the globally defined new_cluster variable, causing
compiler warnings when running with -Wshadow. The function is
only applicable to the new cluster, so remove the parameter
rather than rename to match check_new_cluster_is_empty which
also only applies to the new cluster.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Discussion: https://postgr.es/m/CAHut+PvS_PHLntWy1yTgXv0O1tWm4iVcKBQFzpoQRDsm2Ce_Fg@mail.gmail.com
This commit introduces descriptively-named macros for the
identifiers used in wire protocol messages. These new macros are
placed in a new header file so that they can be easily used by
third-party code.
Author: Dave Cramer
Reviewed-by: Alvaro Herrera, Tatsuo Ishii, Peter Smith, Robert Haas, Tom Lane, Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/CADK3HHKbBmK-PKf1bPNFoMC%2BoBt%2BpD9PH8h5nvmBQskEHm-Ehw%40mail.gmail.com
Commit 31966b15 invented a way for functions dealing with relation
extension to accept a Relation in online code and an SMgrRelation in
recovery code. It seems highly likely that future bufmgr.c interfaces
will face the same problem, and need to do something similar.
Generalize the names so that each interface doesn't have to re-invent
the wheel.
Back-patch to 16. Since extension AM authors might start using the
constructor macros once 16 ships, we agreed to do the rename in 16
rather than waiting for 17.
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2B6tLD2BhpRWycEoti6LVLyQq457UL4ticP5xd8LqHySA%40mail.gmail.com
Attribute missing values might be needed past the lifetime of the tuple
descriptors from which they are extracted. To avoid possibly using
pointers for by-reference values which might thus be left dangling, we
cache a datumCopy'd version of the datum in the TopMemoryContext. Since
we first search for the value this only needs to be done once per
session for any such value.
Original complaint from Tom Lane, idea for mitigation by Andrew Dunstan,
tweaked by Tom Lane.
Backpatch to version 11 where missing values were introduced.
Discussion: https://postgr.es/m/1306569.1687978174@sss.pgh.pa.us
This commit fixes the function of $subject for shared relations. This
feature has been added by e042678. Unfortunately, this new behavior got
removed by 5891c7a when moving statistics to shared memory.
Reported-by: Mitsuru Hinata
Author: Masahiro Ikeda
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada
Discussion: https://postgr.es/m/7cc69f863d9b1bc677544e3accd0e4b4@oss.nttdata.com
Backpatch-through: 15
This new view, wrapped around a SRF, shows some information known about
wait events, as of:
- Name.
- Type (Activity, I/O, Extension, etc.).
- Description.
All the information retrieved comes from wait_event_names.txt, and the
description is the same as the documentation with filters applied to
remove any XML markups. This view is useful when joined with
pg_stat_activity to get the description of a wait event reported.
Custom wait events for extensions are included in the view.
Original idea by Yves Colin.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Tom Lane, Michael
Paquier
Discussion: https://postgr.es/m/0e2ae164-dc89-03c3-cf7f-de86378053ac@gmail.com
A significant chunk of the time on the macos CI task is spent installing
packages using homebrew. The downloads of the packages are cached, but the
installation needs to happen every time. We can't cache the whole homebrew
installation, because it is too large due to pre-installed packages.
Speed this up by installing packages using macports and caching the
installation as .dmg. That's a lot faster than unpacking a tarball.
In addition, don't install llvm - it wasn't enabled when building, so it's
just a waste of time/space.
This substantially speeds up the mac CI time, both in the cold cache and in
the warm cache case (the latter from ~1m20s to ~5s).
It doesn't seem great to have diverging sources of packages for CI between
branches, so backpatch to 15 (where CI was added).
Discussion: https://postgr.es/m/20230805202539.r3umyamsnctysdc7@awork3.anarazel.de
Backpatch: 15-, where CI was added
The OAT hooks are added in ALTER TABLE for the following subcommands:
- { ENABLE | DISABLE | [NO] FORCE } ROW LEVEL SECURITY
- { ENABLE | DISABLE } TRIGGER
- { ENABLE | DISABLE } RULE. Note that there was hook for pg_rewrite,
but not for relation ALTER'ed in pg_class.
Tests are added to test_oat_hook for all the subcommand patterns gaining
hooks here. Based on an ask from Legs Mansion.
Discussion: https://postgr.es/m/tencent_083B3850655AC6EE04FA0A400766D3FE8309@qq.com
The source code comment already said that the presence of the field
element_types.domain_default might be a bug in the standard, since it
never made sense there. Indeed, the field is gone in newer versions
of the standard. So just remove it.
Previously, if a specialized comparator found equal datum1 keys,
the "comparetup" function would repeat the comparison on the
datum before proceeding with the unabbreviated first key
and/or additional sort keys.
Move comparing additional sort keys into "tiebreak" functions so
that specialized comparators can call these directly if needed,
avoiding duplicate work.
Reviewed by David Rowley
Discussion: https://postgr.es/m/CAFBsxsGaVfUrjTghpf%3DkDBYY%3DjWx1PN-fuusVe7Vw5s0XqGdGw%40mail.gmail.com
This was disabled in commit 6f80a8d9c due to the lack of support for
handling of pseudoconstant quals assigned to replaced joins in
createplan.c. To re-allow it, this patch adds the support by 1)
modifying the ForeignPath and CustomPath structs so that if they
represent foreign and custom scans replacing a join with a scan, they
store the list of RestrictInfo nodes to apply to the join, as in
JoinPaths, and by 2) modifying create_scan_plan() in createplan.c so
that it uses that list in that case, instead of the baserestrictinfo
list, to get pseudoconstant quals assigned to the join, as mentioned in
the commit message for that commit.
Important item for the release notes: this is non-backwards-compatible
since it modifies the ForeignPath and CustomPath structs, as mentioned
above, and changes the argument lists for FDW helper functions
create_foreignscan_path(), create_foreign_join_path(), and
create_foreign_upper_path().
Richard Guo, with some additional changes by me, reviewed by Nishant
Sharma, Suraj Kharage, and Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
Commit b91dd9de was concerned with a theoretical problem with our
non-atomic condition variable operations. If you stop sleeping, and
then cancel the sleep in a separate step, you might be signaled in
between, and that could be lost. That doesn't matter for callers of
ConditionVariableBroadcast(), but callers of ConditionVariableSignal()
might be upset if a signal went missing like this.
Commit bc971f4025 interacted badly with that logic, because it doesn't
use ConditionVariableSleep(), which would normally put us back in the
wait list. ConditionVariableCancelSleep() would be confused and think
we'd received an extra signal, and try to forward it to another backend,
resulting in wakeup storms.
New idea: ConditionVariableCancelSleep() can just return true if we've
been signaled. Hypothetical users of ConditionVariableSignal() would
then still have a way to deal with rare lost signals if they are
concerned about that problem.
Back-patch to 16, where bc971f4025 arrived.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/2840876b-4cfe-240f-0a7e-29ffd66711e7%40enterprisedb.com
The new relation extension logic, introduced in 00d1e02be2, could lead to
slowdowns in some scenarios. E.g., when loading narrow rows into a table using
COPY, the caller of RelationGetBufferForTuple() will only request a small
number of pages. Without concurrency, we just extended using pwritev() in that
case. However, if there is *some* concurrency, we switched between extending
by a small number of pages and a larger number of pages, depending on the
number of waiters for the relation extension logic. However, some
filesystems, XFS in particular, do not perform well when switching between
extending files using fallocate() and pwritev().
To avoid that issue, remember the number of prior relation extensions in
BulkInsertState and extend more aggressively if there were prior relation
extensions. That not just avoids the aforementioned slowdown, but also leads
to noticeable performance gains in other situations, primarily due to
extending more aggressively when there is no concurrency. I should have done
it this way from the get go.
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAD21AoDvDmUQeJtZrau1ovnT_smN940=Kp6mszNGK3bq9yRN6g@mail.gmail.com
Backpatch: 16-, where the new relation extension code was added
Currently, the names of the custom wait event must be registered for
each backend, requiring all these to link to the shared memory area of
an extension, even if these are not loaded with
shared_preload_libraries.
This patch relaxes the constraints related to this infrastructure by
storing the wait events and their names in two dynamic hash tables in
shared memory. This has the advantage to simplify the registration of
custom wait events to a single routine call that returns an event ID
ready for consumption:
uint32 WaitEventExtensionNew(const char *wait_event_name);
The caller of this routine can then cache locally the ID returned, to be
used for pgstat_report_wait_start(), WaitLatch() or a similar routine.
The implementation uses two hash tables: one with a key based on the
event name to avoid duplicates and a second using the event ID as key
for event lookups, like on pg_stat_activity. These tables can hold a
minimum of 16 entries, and a maximum of 128 entries, which should be plenty
enough.
The code changes done in worker_spi show how things are simplified (most
of the code removed in this commit comes from there):
- worker_spi_init() is gone.
- No more shared memory hooks required (size requested and
initialization).
- The custom wait event ID is cached in the process that needs to set
it, with one single call to WaitEventExtensionNew() to retrieve it.
Per suggestion from Andres Freund.
Author: Masahiro Ikeda, with a few tweaks from me.
Discussion: https://postgr.es/m/20230801032349.aaiuvhtrcvvcwzcx@awork3.anarazel.de
We deduce a LogicalRepWorker's type from the values of several different
fields ('relid' and 'leader_pid') whenever logic needs to know it.
In fact, the logical replication worker type is already known at the time
of launching the LogicalRepWorker and it never changes for the lifetime of
that process. Instead of deducing the type, it is simpler to just store it
one time, and access it directly thereafter.
Author: Peter Smith
Reviewed-by: Amit Kapila, Bharath Rupireddy
Discussion: http://postgr.es/m/CAHut+PttPSuP0yoZ=9zLDXKqTJ=d0bhxwKaEaNcaym1XqcvDEg@mail.gmail.com
pg_logical_emit_message(false, '_', repeat('x', 1069547465)) failed with
self-contradictory message "WAL record would be 1069547520 bytes (of
maximum 1069547520 bytes)". There's no particular benefit from allowing
or denying one byte in either direction; XLogRecordMaxSize could rise a
few megabytes without trouble. Hence, this is just for cleanliness.
Back-patch to v16, where this check first appeared.
This relies on the "location" field added to TransactionStmt in 31de7e6,
now applied to the "gid" field used by 2PC commands. These commands are
now reported like:
COMMIT PREPARED $1
PREPARE TRANSACTION $1
ROLLBACK PREPARED $1
Applying constants for these commands is a huge advantage for workloads
that rely a lot on 2PC commands with different GIDs. Some tests are
added to track the new behavior.
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
Store function config settings in lists to avoid the need to parse and
allocate for each function execution.
Speedup is modest but significant. Additionally, this change also
seems cleaner and supports some other performance improvements under
discussion.
Discussion: https://postgr.es/m/04c8592dbd694e4114a3ed87139a7a04e4363030.camel@j-davis.com
Reviewed-by: Nathan Bossart
The fix itself is fine, but the test revealed other problems related
to parallel query that are not easily fixable. Remove the test for
now to fix the buildfarm.
Discussion: https://postgr.es/m/88825.1691665432@sss.pgh.pa.us
Backpatch-through: 11
Commit 19d8e2308b changed the list of set-of-columns that can be
returned by RelationGetIndexAttrBitmap, but didn't update its
"documentation". That was pretty hard to read already, so rewrite to
make it more comprehensible, adding the missing values while at it.
Backpatch to 16, like that commit.
Discussion: https://postgr.es/m/20230809091155.7c7f3gttjk3dj4ze@alvherre.pgsql
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
As with the Intel and Arm CRC instructions, compiler intrinsics for
them must be supported by the compiler. In contrast, no runtime check
is needed. Aligned memory access is faster, so use the Arm coding as
a model.
YANG Xudong
Discussion: https://postgr.es/m/b522a0c5-e3b2-99cc-6387-58134fb88cbe%40ymatrix.cn
In-place tablespaces would be dumped with the path produced by
pg_tablespace_location(), which is in this case a relative path built as
pg_tblspc/OID, but this would fail to restore as such tablespaces need
to use an empty string as location. In order to detect if an in-place
tablespace is used, this commit checks if the path returned is relative
and adapts the dump contents in consequence.
Like the other changes related to in-place tablespaces, no backpatch is
done as these are only intended for development purposes. Rui Zhao has
fixed the code, while the test is from me.
Author: Rui Zhao, Michael Paquier
Discussion: https://postgr.es/m/80c80b4a-b87b-456f-bd46-1ae326601d79.xiyuan.zr@alibaba-inc.com
fa88928 has introduced wait_event_names.txt, and some of its entries had
some documentation fields with more information than necessary.
This commit brings back the description of all the wait events to be
consistent with the older stable branches. Five descriptions were
incorrect.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/e378989e-1899-643a-dec1-10f691a0a105@gmail.com
Substituting such values in extension scripts facilitated SQL injection
when @extowner@, @extschema@, or @extschema:...@ appeared inside a
quoting construct (dollar quoting, '', or ""). No bundled extension was
vulnerable. Vulnerable uses do appear in a documentation example and in
non-bundled extensions. Hence, the attack prerequisite was an
administrator having installed files of a vulnerable, trusted,
non-bundled extension. Subject to that prerequisite, this enabled an
attacker having database-level CREATE privilege to execute arbitrary
code as the bootstrap superuser. By blocking this attack in the core
server, there's no need to modify individual extensions. Back-patch to
v11 (all supported versions).
Reported by Micah Gate, Valerie Woolard, Tim Carey-Smith, and Christoph
Berg.
Security: CVE-2023-39417
The use of Memoize was already disabled in normal joins when the join
conditions had volatile functions per the code in
match_opclause_to_indexcol(). Ordinarily, the parameterization for the
inner side of a nested loop will be an Index Scan or at least eventually
lead to an index scan (perhaps nested several joins deep). However, for
lateral joins, that's not the case and seq scans can be parameterized
too, so we can't rely on match_opclause_to_indexcol().
Here we explicitly check the parameterization for volatile functions and
don't consider the generation of a Memoize path when such functions
are present.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs49nHFnHbpepLsv_yF3qkpCS4BdB-v8HoJVv8_=Oat0u_w@mail.gmail.com
Backpatch-through: 14, where Memoize was introduced
If MERGE executes an UPDATE action on a table with row-level security,
the code incorrectly applied the WITH CHECK clauses from the target
table's INSERT policies to new rows, instead of the clauses from the
table's UPDATE policies. In addition, it failed to check new rows
against the target table's SELECT policies, if SELECT permissions were
required (likely to always be the case).
In addition, if MERGE executes a DO NOTHING action for matched rows,
the code incorrectly applied the USING clauses from the target table's
DELETE policies to existing target tuples. These policies were applied
as checks that would throw an error, if they did not pass.
Fix this, so that a MERGE UPDATE action applies the same RLS policies
as a plain UPDATE query with a WHERE clause, and a DO NOTHING action
does not apply any RLS checks (other than adding clauses from SELECT
policies to the join).
Back-patch to v15, where MERGE was introduced.
Dean Rasheed, reviewed by Stephen Frost.
Security: CVE-2023-39418
If we define ZLIB_CONST before including zlib.h, zlib augments some
interfaces with const decorations. By doing that we can keep our own
interfaces cleaner and can remove some unconstify calls.
ZLIB_CONST was introduced in zlib 1.2.5.2 (17 Dec 2011). When
compiling with older zlib releases, you might now get compiler
warnings about discarding qualifiers.
CentOS 6 has zlib 1.2.3, but in 8e278b6576, we removed support for the
OpenSSL release in CentOS 6, so it seems ok to de-support the zlib
release in CentOS 6 as well.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/33462926-bb1e-7cc9-8d92-d86318e8ed1d%40eisentraut.org
The code in join_search_one_level was a bit convoluted. With a casual
glance, you might think that other_rels_list was being set to something
other than joinrels[1] when level == 2, however, joinrels[level - 1] is
joinrels[1] when level == 2, so nothing special needs to happen to set
other_rels_list. Let's clean that up to avoid confusing anyone.
In passing, we may as well modernize the loop in
make_rels_by_clause_joins() and instead of passing in the ListCell to
start looping from, let's just pass in the index where to start from and
make use of for_each_from(). Ever since 1cff1b95a, Lists are arrays
under the hood. lnext() and list_head() both seem a little too linked-list
like.
Author: Alex Hsieh, David Rowley, Richard Guo
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CANWNU8x9P9aCXGF%3DaT-A_8mLTAT0LkcZ_ySYrGbcuHzMQw2-1g%40mail.gmail.com
This test was recently added in 3900a02c9. It appears to be unstable in
regards to the join order presumably due to the relations at either side
of the join being equal in side. Here we add a qual to make one of them
smaller so the planner is more likely to choose to hash the smaller of the
two.
Reported-by: Nathan Bossart, Tom Lane
Discussion: https://www.postgr.es/m/20230803235403.GC1238296@nathanxps13
Here we adjust the costs for WindowAggs so that they properly take into
account how much of their subnode they must read before outputting the
first row. Without this, we always assumed that the startup cost for the
WindowAgg was not much more expensive than the startup cost of its
subnode, however, that's going to be completely wrong in many cases. The
WindowAgg may have to read *all* of its subnode to output a single row
with certain window bound options.
Here we estimate how many rows we'll need to read from the WindowAgg's
subnode and proportionally add more of the subnode's run costs onto the
WindowAgg's startup costs according to how much of it we expect to have to
read in order to produce the first WindowAgg row.
The reason this is more important than we might have initially thought is
that we may end up making use of a path from the lower planner that works
well as a cheap startup plan when the query has a LIMIT clause, however,
the WindowAgg might mean we need to read far more rows than what the LIMIT
specifies.
No backpatch on this so as not to cause plan changes in released
versions.
Bug: #17862
Reported-by: Tim Palmer
Author: David Rowley
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/17862-1ab8f74b0f7b0611@postgresql.org
Discussion: https://postgr.es/m/CAApHDvrB0S5BMv+0-wTTqWFE-BJ0noWqTnDu9QQfjZ2VSpLv_g@mail.gmail.com
Both apply and tablesync workers were using ApplyWorkerMain() as entry
point. As the name implies, ApplyWorkerMain() should be considered as
the main function for apply workers. Tablesync worker's path was hidden
and does not have enough in common to share the same main function with
apply worker.
Also, most of the code shared by both worker types is already combined
in LogicalRepApplyLoop(). There is no need to combine the rest in
ApplyWorkerMain() anymore.
This patch introduces TablesyncWorkerMain() as a new entry point for
tablesync workers. This aims to increase code readability and would help
with future improvements like the reuse of tablesync workers in the
initial synchronization.
Author: Melih Mutlu based on suggestions by Melanie Plageman
Reviewed-by: Peter Smith, Kuroda Hayato, Amit Kapila
Discussion: http://postgr.es/m/CAGPVpCTq=rUDd4JUdaRc1XUWf4BrH2gdSNf3rtOMUGj9rPpfzQ@mail.gmail.com
Between 6fcda9aba and 1b6f632a3, the pg_strtoint functions became quite
a bit slower in v16, despite efforts in 6b423ec67 to speed these up.
Since the majority of cases for these functions will only contain
base-10 digits, perhaps prefixed by a '-', it makes sense to have a
special case for this and just fall back on the more complex version
which processes hex, octal, binary and underscores if the fast path
version fails to parse the string.
While we're here, update the header comments for these functions to
mention that hex, octal and binary formats along with underscore
separators are now supported.
Author: Andres Freund, David Rowley
Reported-by: Masahiko Sawada
Reviewed-by: Dean Rasheed, John Naylor
Discussion: https://postgr.es/m/CAD21AoDvDmUQeJtZrau1ovnT_smN940%3DKp6mszNGK3bq9yRN6g%40mail.gmail.com
Backpatch-through: 16, where 6fcda9aba and 1b6f632a3 were added
The stats regression test attempts to ensure that Buffer Access Strategy
"reuses" are being counted in pg_stat_io by vacuuming a table which is larger
than the size of the strategy ring. However, when shared buffers are in
sufficiently high demand, another backend could evict one of the blocks in the
strategy ring before the first backend has a chance to reuse the buffer. The
backend using the strategy would then evict another shared buffer and add that
buffer to the strategy ring. This counts as an eviction and not a reuse in
pg_stat_io. Count both evictions and reuses in the test to ensure it does not
fail incorrectly.
Reported-by: Jeff Davis <pgsql@j-davis.com>,
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_bNG27AxG9TdPtwsL6wg8AWbVckjmTL2t1HF=miDQuNtw@mail.gmail.com
This was failing for queries which try to get the .type() of a
jpiLikeRegex. For example:
select jsonb_path_query('["string", "string"]',
'($[0] like_regex ".{7}").type()');
Reported-by: Alexander Kozhemyakin
Bug: #18035
Discussion: https://postgr.es/m/18035-64af5cdcb5adf2a9@postgresql.org
Backpatch-through: 12, where SQL/JSON path was added.
The previous commit removed the "override" APIs. Surviving APIs facilitate
plancache.c to snapshot search_path and test whether the current value equals
a remembered snapshot.
Aleksander Alekseev. Reported by Alexander Lakhin and Noah Misch.
Discussion: https://postgr.es/m/8ffb4650-52c4-6a81-38fc-8f99be981130@gmail.com
Two backend routines are added to allow extension to allocate and define
custom wait events, all of these being allocated in the type
"Extension":
* WaitEventExtensionNew(), that allocates a wait event ID computed from
a counter in shared memory.
* WaitEventExtensionRegisterName(), to associate a custom string to the
wait event ID allocated.
Note that this includes an example of how to use this new facility in
worker_spi with tests in TAP for various scenarios, and some
documentation about how to use them.
Any code in the tree that currently uses WAIT_EVENT_EXTENSION could
switch to this new facility to define custom wait events. This is left
as work for future patches.
Author: Masahiro Ikeda
Reviewed-by: Andres Freund, Michael Paquier, Tristan Partin, Bharath
Rupireddy
Discussion: https://postgr.es/m/b9f5411acda0cf15c8fbb767702ff43e@oss.nttdata.com
MSVC's _BitScan* functions return a boolean indicating whether any
bits were set in the input, and we were previously asserting that
they returned true, per our API. This is correct. However, other
platforms simply assert that the input is non-zero, so do that to be
more consistent.
Noted while investigating a hypothesis from Ranier Vilela about
undefined behavior, but this is not his proposed patch.
Discussion: https://www.postgresql.org/message-id/CAEudQAoDhUZyKGJ1vbMGcgVUOcsixe-%3DjcVaDWarqkUg163D2w%40mail.gmail.com
These are useful to extract the class ID and the event ID associated to
a single uint32 wait_event_info. Only two code paths use them now, but
an upcoming patch will extend their use.
Discussion: https://postgr.es/m/ZMcJ7F7nkGkIs8zP@paquier.xyz
libpq_source.c would consider any result returned by
pg_tablespace_location() as a symlink, resulting in run-time errors like
that:
pg_rewind: error: file "pg_tblspc/NN" is of different type in source and target
In-place tablespaces are directories located in pg_tblspc/, returned as
relative paths instead of absolute paths, so rely on that to make the
difference with a normal tablespace and an in-place one. If the path is
relative, the tablespace is handled as a directory. If the path is
absolute, consider it as a symlink.
In-place tablespaces are only intended for development purposes, so like
363e8f9 no backpatch is done. A test is added in pg_rewind with an
in-place tablespace and some data in it.
Author: Rui Zhao, Michael Paquier
Discussion: https://postgr.es/m/2b79d2a8-b2d5-4bd7-a15b-31e485100980.xiyuan.zr@alibaba-inc.com
The second portion of the tests had a race condition where it would be
possible for the startup of the dynamic workers to fail, in the event
where the static workers started before them with the library loading in
shared_preload_libraries did not finish to create their respective
schemas. The conflict is caused by the fact that the dynamic and static
workers used the same IDs, overlapping each other, so, for now, switch
the dynamic workers to use different IDs, leading to different schemas
created.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20230728022332.egqzobhskmlf6ntr@awork3.anarazel.de
Commits 83dec5a712 and ff402ae11b taught vacuumdb to reuse
passwords instead of prompting repeatedly. However, the docs still
warn about repeated prompts, and this improvement was not applied
to clusterdb and reindexdb. This commit allows clusterdb and
reindexdb to reuse passwords just like vacuumdb does, and it
expunges the aforementioned warnings from the docs.
Reviewed-by: Gurjeet Singh, Zhang Mingli
Discussion: https://postgr.es/m/20230628045741.GA1813397%40nathanxps13
Commit e7cb7ee14, which introduced the infrastructure for FDWs and
custom scan providers to replace joins with scans, failed to add support
handling of pseudoconstant quals assigned to replaced joins in
createplan.c, leading to an incorrect plan without a gating Result node
when postgres_fdw replaced a join with such a qual.
To fix, we could add the support by 1) modifying the ForeignPath and
CustomPath structs to store the list of RestrictInfo nodes to apply to
the join, as in JoinPaths, if they represent foreign and custom scans
replacing a join with a scan, and by 2) modifying create_scan_plan() in
createplan.c to use that list in that case, instead of the
baserestrictinfo list, to get pseudoconstant quals assigned to the join;
but #1 would cause an ABI break. So fix by modifying the infrastructure
to just disallow replacing joins with such quals.
Back-patch to all supported branches.
Reported by Nishant Sharma. Patch by me, reviewed by Nishant Sharma and
Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
Historically, hba.c limited tokens in the authentication configuration
files (pg_hba.conf and pg_ident.conf) to less than 256 bytes. We have
seen a few reports of this limit causing problems; notably, for
moderately-complex LDAP configurations. Let's get rid of the fixed
limit by using a StringInfo instead of a fixed-size buffer.
This actually takes less code than before, since we can get rid of
a nontrivial error recovery stanza. It's doubtless a hair slower,
but parsing the content of the HBA files should in no way be
performance-critical.
Although this is a pretty straightforward patch, it doesn't seem
worth the risk to back-patch given the small number of complaints
to date. In released branches, we'll just raise MAX_TOKEN to
ameliorate the problem.
Discussion: https://postgr.es/m/1588937.1690221208@sss.pgh.pa.us
This commit moves worker_spi to use TAP tests. sql/worker_spi.sql is
gone, replaced by an equivalent set of queries in a TAP script, without
worker_spi loaded in shared_preload_libraries:
- One query to launch a worker dynamically, relying now on "postgres" as
the default database to connect to.
- Two wait queries with poll_query_until(), one to wait for the worker
schema to be initialized and a second to wait for a tuple processed by
the worker.
- Server reload to accelerate the main loop of the spawned worker.
More coverage is added for workers registered when the library is loaded
with shared_preload_libraries, while on it, checking that these are
connecting to the database set in the GUC worker_spi.database.
A local run of these test is showing that TAP is slightly faster than
the original, while providing more coverage (3.7s vs 4.4s). There was
also some discussions about keeping the SQL tests, but this would
require initializing twice a cluster, increasing the runtime of the
tests up to 5.6s here.
These tests will be expanded more in an upcoming patch aimed at adding
support for custom wait events for the Extension class, still under
discussion, to check the new in-core APIs with and without a library set
in shared_preload_libraries.
Bharath has written the part where shared_preload_libraries is used,
while I have migrated the existing SQL tests to TAP.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Masahiro Ikeda
Discussion: https://postgr.es/m/CALj2ACWR9ncAiDF73unqdJF1dmsA2R0efGXX2624X+YVxcAVWg@mail.gmail.com
9f8377f7a added code to allow COPY FROM insert a column's default value
when the input matches the DEFAULT string specified in the COPY command.
Here we fix some inefficient code which needlessly palloc0'd an array to
store if we should use the default value or input value for the given
column. This array was being palloc0'd and pfree'd once per row. It's
much more efficient to allocate this once and just reset the values once
per row.
Reported-by: Masahiko Sawada
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoDvDmUQeJtZrau1ovnT_smN940%3DKp6mszNGK3bq9yRN6g%40mail.gmail.com
Backpatch-through: 16, where 9f8377f7a was introduced.
There was already a check on the relation OID, but not its index OID and
the attributes that can be used during the syscache lookups. The two
assertions added by this commit are cheap, and actually useful for
developers to fasten the detection of incorrect data in a new entry
added in the syscache list, as these assertions are triggered during the
initial cache loading (initdb, or just backend startup), not requiring a
syscache that uses the new entry.
While on it, the relation OID check is switched to use OidIsValid().
Author: Aleksander Alekseev
Reviewed-by: Dagfinn Ilmari Mannsåker, Zhang Mingli, Michael Paquier
Discussion: https://postgr.es/m/CAJ7c6TOjUTJ0jxvWY6oJeP2-840OF8ch7qscZQsuVuotXTOS_g@mail.gmail.com
In pg_stat_statements, savepoint names now show up as constants with a
parameter symbol, using as base query string the one added as a new
entry to the PGSS hash table, leading to:
RELEASE $1
ROLLBACK TO $1
SAVEPOINT $1
Applying constants to these query parts is a huge advantage for
workloads that generate randomly savepoint points, like ORMs (Django is
at the origin of this patch). The ODBC driver is a second layer that
likes a lot savepoints, though it does not use a random naming pattern.
A "location" field is added to TransactionStmt, now set only for
savepoints. The savepoint name is ignored by the query jumbling. The
location can be extended to other query patterns, if required, like 2PC
commands. Some tests are added to pg_stat_statements for all the query
patterns supported by the parser.
ROLLBACK, ROLLBACK TO SAVEPOINT and ROLLBACK TRANSACTION TO SAVEPOINT
have the same Node representation, so all these are equivalents. The
same happens for RELEASE and RELEASE SAVEPOINT.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmm+2s9PA4OaumwMJReWHk8qvJ_-g1WqxDRDAN1BSUfxyTw@mail.gmail.com
psql's --echo-hidden, --log-file, and --single-step options
generate extra lines to clearly separate queries from other output.
Presently, these extra lines are not valid SQL comments, which
makes them a hazard for anyone trying to copy/paste the decorated
queries into a client or query editor. This commit replaces the
starting and ending asterisks in these extra lines with forward
slashes so that they are valid SQL comments that can be copy/pasted
without incident.
Author: Kirk Wolak
Reviewed-by: Pavel Stehule, Laurenz Albe, Tom Lane, Alvaro Herrera, Andrey Borodin
Discussion: https://postgr.es/m/CACLU5mTFJRJYtbvmZ26txGgmXWQo0hkGhH2o3hEquUPmSbGtBw%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON()
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values,
and has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value,
including json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis
or represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Catversion bumped as this changes ruleutils.c.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby, Álvaro Herrera,
Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This is to export datum_to_json(), datum_to_jsonb(), and
jsonb_from_cstring(), though the last one is exported as
jsonb_from_text().
A subsequent commit to add new SQL/JSON constructor functions will
need them for calling from the executor.
Discussion: https://postgr.es/m/20230720160252.ldk7jy6jqclxfxkq%40alvherre.pgsql
Commit 5764f611e used dclist_delete_from() to remove the proc from the
wait queue. However, since it doesn't clear dist_node's next/prev to
NULL, it could call RemoveFromWaitQueue() twice: when the process
detects a deadlock and then when cleaning up locks on aborting the
transaction. The waiting lock information is cleared in the first
call, so it led to a crash in the second call.
Backpatch to v16, where the change was introduced.
Bug: #18031
Reported-by: Justin Pryzby, Alexander Lakhin
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/ZKy4AdrLEfbqrxGJ%40telsasoft.com
Discussion: https://postgr.es/m/18031-ebe2d08cb405f6cc@postgresql.org
Backpatch-through: 16
This gives a way to make a difference between workers registered when
the library is loaded with shared_preload_libraries and when these are
launched dynamically, in ps output or pg_stat_activity.
Extracted from a larger patch by the same author.
Author: Bharath Rupireddy
Reviewed-by: Masahiro Ikeda
Discussion: https://postgr.es/m/CALj2ACWR9ncAiDF73unqdJF1dmsA2R0efGXX2624X+YVxcAVWg@mail.gmail.com
This commit adds a few comments about what LWLockWaitForVar() relies on
when a backend waits for a variable update on its LWLocks for WAL
insertions up to an expected LSN.
First, LWLockWaitForVar() does not include a memory barrier, relying on
a spinlock taken at the beginning of WaitXLogInsertionsToFinish(). This
was hidden behind two layers of routines in lwlock.c. This assumption
is now documented at the top of LWLockWaitForVar(), and detailed at bit
more within LWLockConflictsWithVar().
Second, document why WaitXLogInsertionsToFinish() does not include
memory barriers, relying on a spinlock at its top, which is, per Andres'
input, fine for two different reasons, both depending on the fact that
the caller of WaitXLogInsertionsToFinish() is waiting for a LSN up to a
certain value.
This area's documentation and assumptions could be improved more in the
future, but at least that's a beginning.
Author: Bharath Rupireddy, Andres Freund
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVF+6jLvqKe6xhDzCCkr=rfd6upaGc3477Pji1Ke9G7Bg@mail.gmail.com
Previously, when selecting an usable index for update/delete for the
REPLICA IDENTITY FULL table, in IsIndexOnlyExpression(), we used to
check if all index fields are not expressions. However, it was not
necessary, because it is enough to check if only the leftmost index
field is not an expression (and references the remote table column)
and this check has already been done by
RemoteRelContainsLeftMostColumnOnIdx().
This commit removes IsIndexOnlyExpression() and
RemoteRelContainsLeftMostColumnOnIdx() and all checks for usable
indexes for REPLICA IDENTITY FULL tables are now performed by
IsIndexUsableForReplicaIdentityFull().
Backpatch this to remain the code consistent.
Reported-by: Peter Smith
Reviewed-by: Amit Kapila, Önder Kalacı
Discussion: https://postgr.es/m/CAHut%2BPsGRE5WSsY0jcLHJEoA17MrbP9yy8FxdjC_ZOAACxbt%2BQ%40mail.gmail.com
Backpatch-through: 16
The WAL insertion lock variable insertingAt is currently being read
and written with the help of the LWLock wait list lock to avoid any read
of torn values. This wait list lock can become a point of contention on
a highly concurrent write workloads.
This commit switches insertingAt to a 64b atomic variable that provides
torn-free reads/writes. On platforms without 64b atomic support, the
fallback implementation uses spinlocks to provide the same guarantees
for the values read. LWLockWaitForVar(), through
LWLockConflictsWithVar(), reads the new value to check if it still needs
to wait with a u64 atomic operation. LWLockUpdateVar() updates the
variable before waking up the waiters with an exchange_u64 (full memory
barrier). LWLockReleaseClearVar() now uses also an exchange_u64 to
reset the variable. Before this commit, all these steps relied on
LWLockWaitListLock() and LWLockWaitListUnlock().
This reduces contention on LWLock wait list lock and improves
performance of highly-concurrent write workloads. Here are some
numbers using pg_logical_emit_message() (HEAD at d6677b93) with various
arbitrary record lengths and clients up to 1k on a rather-large machine
(64 vCPUs, 512GB of RAM, 16 cores per sockets, 2 sockets), in terms of
TPS numbers coming from pgbench:
message_size_b | 16 | 64 | 256 | 1024
--------------------+--------+--------+--------+-------
patch_4_clients | 83830 | 82929 | 80478 | 73131
patch_16_clients | 267655 | 264973 | 250566 | 213985
patch_64_clients | 380423 | 378318 | 356907 | 294248
patch_256_clients | 360915 | 354436 | 326209 | 263664
patch_512_clients | 332654 | 321199 | 287521 | 240128
patch_1024_clients | 288263 | 276614 | 258220 | 217063
patch_2048_clients | 252280 | 243558 | 230062 | 192429
patch_4096_clients | 212566 | 213654 | 205951 | 166955
head_4_clients | 83686 | 83766 | 81233 | 73749
head_16_clients | 266503 | 265546 | 249261 | 213645
head_64_clients | 366122 | 363462 | 341078 | 261707
head_256_clients | 132600 | 132573 | 134392 | 165799
head_512_clients | 118937 | 114332 | 116860 | 150672
head_1024_clients | 133546 | 115256 | 125236 | 151390
head_2048_clients | 137877 | 117802 | 120909 | 138165
head_4096_clients | 113440 | 115611 | 120635 | 114361
Bharath has been measuring similar improvements, where the limit of the
WAL insertion lock begins to be felt when more than 256 concurrent
clients are involved in this specific workload.
An extra patch has been discussed to introduce a fast-exit path in
LWLockUpdateVar() when there are no waiters, still this does not
influence the write-heavy workload cases discussed as there are always
waiters. This will be considered separately.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVF+6jLvqKe6xhDzCCkr=rfd6upaGc3477Pji1Ke9G7Bg@mail.gmail.com
We include the message type while displaying an error context in the
apply worker. Now, while retrieving the message type string if the
message type is unknown we throw an error that will hide the original
error. So, instead, we need to simply return the string indicating an
unknown message type.
Reported-by: Ashutosh Bapat
Author: Euler Taveira, Amit Kapila
Reviewed-by: Ashutosh Bapat
Backpatch-through: 15
Discussion: https://postgr.es/m/CAExHW5suAEDW-mBZt_qu4RVxWZ1vL54-L+ci2zreYWebpzxYsA@mail.gmail.com
Due to the bug LimitAdditionalPins() could return 0, violating
LimitAdditionalPins()'s API ("One additional pin is always allowed"). This
could be hit when setting shared_buffers very low and using a fair amount of
concurrency.
This bug was introduced in 31966b151e.
Author: "Anton A. Melnikov" <aamelnikov@inbox.ru>
Reported-by: "Anton A. Melnikov" <aamelnikov@inbox.ru>
Reported-by: Victoria Shepard
Discussion: https://postgr.es/m/ae46f2fb-5586-3de0-b54b-1bb0f6410ebd@inbox.ru
Backpatch: 16-
Because PostgreSQL::Version is very nuanced about development version
numbers, the comparison to 16beta2 makes it think that that release is
older than 16, therefore applying a database tweak that doesn't work
there (the comparison is only supposed to match when run on version 15).
As suggested by Andrew Dunstan, fix by having AdjustUpgrade.pm public
methods create a separate PostgreSQL::Version object to use for these
comparisons, that only carries the major version number.
While at it, have the same methods ensure that the objects given are of
the expected type.
Backpatch to 16. This module goes all the way back to 9.2, but there's
probably no need for this fix except where betas still live.
Co-authored-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20230719110504.zbu74o54bqqlsufb@alvherre.pgsql
This commit switches the client-side data generation from INSERT queries
to COPY for the two tables pgbench_branches and pgbench_tellers.
pgbench_accounts was already using COPY.
COPY is a better interface for bulk loading or high latency connections
(this point can be countered with the option for server-side data
generation, still client-side is the default), and measurements have
proved that using it for these two other tables can lead to improvements
during initialization. I did not notice slowdowns at large scale
numbers on a local setup, either, most of the work happening for the
accounts table.
Previously COPY was only used for the pgbench_accounts table because the
amount of data was much larger than the two other tables. The code is
refactored so as all three tables use the same code path to execute the
COPY queries, with a callback to build data rows.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
The tables created by pgbench rely on a few assumptions for TPC-B, where
the "filler" attribute is used to comply with this benchmark's rules as
well as pgbencn historical behavior. The data generated for each table
uses this filler in a different way:
- pgbench_accounts uses it as a blank-padded empty string.
- pgbench_tellers and pgbench_branches use it as a NULL value.
There were no checks done about the consistency of the data initialized,
and this has showed up while discussing a patch that changes the logic
in charge of the client-side data generation (pgbench documents all that
already in its comments). This commit adds some checks on the data
generated for both the server-side and client-side logic.
Reviewed-by: Tristan Partin
Discussion: https://postgr.es/m/ZLik4oKnqRmVCM3t@paquier.xyz
After 3c90dcd03, try_partitionwise_join's child_joinrelids
variable is read only in an Assert, provoking a compiler
warning in non-assert builds. Rearrange code to avoid the
warning and eliminate unnecessary work in the non-assert case.
Per CI testing (via Jeff Davis and Bharath Rupireddy)
Discussion: https://postgr.es/m/ef0de9713e605451f1b60b30648c5ee900b2394c.camel@j-davis.com
Applying add_outer_joins_to_relids() to a child join doesn't actually
work, even if we've built a SpecialJoinInfo specialized to the child,
because that function will also compare the join's relids to elements
of the main join_info_list, which only deal in regular relids not
child relids. This mistake escaped detection by the existing
partitionwise join tests because they didn't test any cases where
add_outer_joins_to_relids() needs to add additional OJ relids (that
is, any cases where join reordering per identity 3 is possible).
Instead, let's apply adjust_child_relids() to the relids of the parent
join. This requires minor code reordering to collect the relevant
AppendRelInfo structures first, but that's work we'd do shortly anyway.
Report and fix by Richard Guo; cosmetic changes by me
Discussion: https://postgr.es/m/CAMbWs49NCNbyubZWgci3o=_OTY=snCfAPtMnM-32f3mm-K-Ckw@mail.gmail.com
b6e1157e7d made some changes to enforce that
JsonValueExpr.formatted_expr is always set and is the expression that
gives a JsonValueExpr its runtime value, but that's not really
apparent from the comments about and the code manipulating
formatted_expr. This commit fixes that.
Per suggestion from Álvaro Herrera.
Discussion: https://postgr.es/m/20230718155313.3wqg6encgt32adqb%40alvherre.pgsql
Currently, the database name to connect is initialized only when the
module is loaded with shared_preload_libraries, causing any call of
worker_spi_launch() to fail if the library is not loaded for a dynamic
bgworker launch. Rather than making the GUC defining the database to
connect to a PGC_POSTMASTER, this commit switches worker_spi.database to
PGC_SIGHUP, loaded even if the module's library is loaded dynamically
for a worker.
We have been discussing about the integration of more advanced tests in
this module, with and without shared_preload_libraries set, so this
eases a bit the work planned in this area.
No backpatch is done as, while this is a bug, it changes the definition
of worker_spi.database.
Author: Masahiro Ikeda
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/d30d3ea7d21cb7c9e1e3cc47e301f1b6@oss.nttdata.com
If both the passed-in plan pointer and plansource->gplan are
NULL, CachedPlanIsSimplyValid would think that the plan pointer
is possibly-valid and try to dereference it. For the one extant
call site in plpgsql, this situation doesn't normally happen
which is why we've not noticed. However, it appears to be possible
if the previous use of the cached plan failed, as per report from
Justin Pryzby. Add an extra check to prevent crashing.
Back-patch to v13 where this code was added.
Discussion: https://postgr.es/m/ZLlV+STFz1l/WhAQ@telsasoft.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate.
Author: Cary Huang <cary.huang@highgo.ca>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
Rather than specifying a validity of 10 000 days into the future
during test certificate generation, this hardcodes the notBefore
and notAfter attributes to known values. This will allow writing
tests on the validity of the certificates without knowing when a
specific certificate was regenerated.
This is done as a prerequisite for an upcoming patch which adds
notBefore and notAfter to pg_stat_ssl and sslinfo.
Discussion: https://postgr.es/m/EE288A58-947E-479A-9D99-C46C273D7A23@yesql.se
When the cluster failed the pg_controldata check for clean shut
down we only reported that it did so, not why. The state of the
cluster can be important information when diagnosing the failed
upgrade attempt, so instead include it in the error message.
Discussion: https://postgr.es/m/E0D5EA16-A085-4753-8DDC-C7055048B439@yesql.se
This essentially removes the JsonbTypeCategory enum and
jsonb_categorize_type() and integrates any jsonb-specific logic that
was in jsonb_categorize_type() into json_categorize_type(), now
moved to jsonfuncs.c. The remaining JsonTypeCategory enum and
json_categorize_type() cover the needs of the callers in both json.c
and jsonb.c. json_categorize_type() has grown a new parameter named
is_jsonb for callers to engage the jsonb-specific behavior of
json_categorize_type().
One notable change in the now exported API of json_categorize_type()
is that it now always returns *outfuncoid even though a caller may
have no need currently to see one.
This is in preparation of later commits to implement additional
SQL/JSON functions.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Based on how postgres.h foes the Oid <-> Datum conversion, there is no
existing bugs but let's be consistent. 17 spots have been noticed as
incorrectly passing down Oids rather than Datums. Aleksander got one,
Zhang two and I the rest.
Author: Michael Paquier, Aleksander Alekseev, Zhang Mingli
Discussion: https://postgr.es/m/ZLUhqsqQN1MOaxdw@paquier.xyz
When pg_recvlogical needs to abort on a signal like SIGINT/SIGTERM, it
is expected to exit cleanly as the code documents. However, the code
forgot to clean up the state of the connection before leaving. This
would cause the tool to emit messages like "unexpected termination of
replication stream" error, which is meant for really unexpected
termination or a crash.
The code is refactored to apply the same termination abort operations for
signals, end LSN and keepalive cases, registering a "reason" for the
termination with a message printed under --verbose adapted to the reason
used.
This is arguably a bug, but this has been this way since the tool exists
and the signal termination can now become slower depending on the change
being decoded when the signal is received.
Reported-by: Andres Freund
Author: Bharath Rupireddy
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Cary Huang, Michael
Paquier
Discussion: https://postgr.es/m/20221019213953.htdtzikf4f45ywil@awork3.anarazel.de
b5913f6120 added a parenthesized syntax for CLUSTER, but it
requires specifying a table name. This is unlike commands such as
VACUUM and ANALYZE, which do not require specifying a table in the
parenthesized syntax. This change resolves this inconsistency.
This is preparatory work for a follow-up commit that will move the
unparenthesized syntax to the "Compatibility" section of the
CLUSTER documentation.
Reviewed-by: Melanie Plageman, Michael Paquier
Discussion: https://postgr.es/m/CAAKRu_bc5uHieG1976kGqJKxyWtyQt9yvktjsVX%2Bi7NOigDjOA%40mail.gmail.com
This change moves the unparenthesized syntax for CLUSTER to the end
of the ClusterStmt rules in preparation for a follow-up commit that
will move this syntax to the "Compatibility" section of the CLUSTER
documentation. The documentation for the CLUSTER syntaxes has also
been consolidated.
Suggested-by: Melanie Plageman
Discussion https://postgr.es/m/CAAKRu_bc5uHieG1976kGqJKxyWtyQt9yvktjsVX%2Bi7NOigDjOA%40mail.gmail.com
With the addition of INHERIT and SET options for role grants,
the historical display of role memberships in \du/\dg is woefully
inadequate. Besides those options, there are pre-existing
shortcomings that you can't see the ADMIN option nor the grantor.
To fix this, remove the "Member of" column from \du/\dg altogether
(making that output usefully narrower), and invent a new meta-command
"\drg" that is specifically for displaying role memberships. It
shows one row for each role granted to the selected role(s), with
the grant options and grantor.
We would not normally back-patch such a feature addition post
feature freeze, but in this case the change is mainly driven by
v16 changes in the server, so it seems appropriate to include it
in v16.
Pavel Luzanov, with bikeshedding and review from a lot of people,
but particularly David Johnston
Discussion: https://postgr.es/m/b9be2d0e-a9bc-0a30-492f-a4f68e4f7740@postgrespro.ru
By default, pg_archivecleanup does not remove backup history files.
These are just few bytes useful for debugging purposes, still keeping
them around can bloat an archive path history files mixed with the WAL
segments if the path has a long history.
This patch adds a new option to control if backup history files are
removed, depending on the oldest segment name to keep around.
While on it, the TAP tests are refactored so as these are now able to
handle lists of files. Each file has a flag to track if it should still
exist or not depending on the oldest segment defined with the command
run.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
This commit refactors a bit the main loop of pg_archivecleanup that
handles the removal of old segments, reducing by one its level of
indentation. This will help an incoming patch that adds a new option
related to the segment filtering logic.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
This has been missed in cb0cca1, noticed before buildfarm member koel
has been able to complain while poking at a different patch. Like the
other commit, backpatch all the way down to limit the odds of merge
conflicts.
Backpatch-through: 11
A crash in the middle of a checkpoint with some two-phase state data
already flushed to disk by this checkpoint could cause a follow-up crash
recovery to recover twice the same transaction, once from what has been
found in pg_twophase/ at the beginning of recovery and a second time
when replaying its corresponding record.
This would lead to FATAL failures in the startup process during
recovery, where the same transaction would have a state recovered twice
instead of once:
LOG: recovering prepared transaction 731 from shared memory
LOG: recovering prepared transaction 731 from shared memory
FATAL: lock ExclusiveLock on object 731/0/0 is already held
This issue is fixed by skipping the addition of any 2PC state coming
from a record whose equivalent 2PC state file has already been loaded in
TwoPhaseState at the beginning of recovery by restoreTwoPhaseData(),
which is OK as long as the system has not reached a consistent state.
The timing to get a messed up recovery processing is very racy, and
would very unlikely happen. The thread that has reported the issue has
demonstrated the bug using injection points to force a PANIC in the
middle of a checkpoint.
Issue introduced in 728bd99, so backpatch all the way down.
Reported-by: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: Michael Paquier
Discussion: https://postgr.es/m/109e6994-b971-48cb-84f6-829646f18b4c.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 11
fe-auth.c references CHAR_BIT since commit 3a465cc67, but it
did not #include <limits.h>, which per POSIX is where that
symbol is defined. This escaped notice so far because
(a) on most platforms, <sys/param.h> pulls in <limits.h>,
(b) even if yours doesn't, OpenSSL pulls it in, so compiling
with --with-openssl masks the omission.
Per bug #18026 from Marcel Hofstetter. Back-patch to v16.
Discussion: https://postgr.es/m/18026-d5bb69f79cd16203@postgresql.org
Here we reduce the block size fields in AllocSetContext, GenerationContext
and SlabContext from Size down to uint32. Ever since c6e0fe1f2, blocks
for non-dedicated palloc chunks can no longer be larger than 1GB, so
there's no need to store the various block size fields as 64-bit values.
32 bits are enough to store 2^30.
Here we also further reduce the memory context struct sizes by getting rid
of the 'keeper' field which stores a pointer to the context's keeper
block. All the context types which have this field always allocate the
keeper block in the same allocation as the memory context itself, so the
keeper block always comes right at the end of the context struct. Add
some macros to calculate that address rather than storing it in the
context.
Overall, in AllocSetContext and GenerationContext, this saves 20 bytes on
64-bit builds which for ALLOCSET_SMALL_SIZES can sometimes mean the
difference between having to allocate a 2nd block and storing all the
required allocations on the keeper block alone. Such contexts are used
in relcache to store cache entries for indexes, of which there can be
a large number in a single backend.
Author: Melih Mutlu
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/CAGPVpCSOW3uJ1QJmsMR9_oE3X7fG_z4q0AoU4R_w+2RzvroPFg@mail.gmail.com
Now that the in-tree getopt_long() moves non-options to the end of
argv (see commit 411b720343), we can remove pg_ctl's workaround for
getopt_long() implementations that don't reorder argv.
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20230713034903.GA991765%40nathanxps13
If the plan itself is parallel-safe, and the initPlans are too,
there's no reason anymore to prevent the plan from being marked
parallel-safe. That restriction (dating to commit ab77a5a45) was
really a special case of the fact that we couldn't transmit subplans
to parallel workers at all. We fixed that in commit 5e6d8d2bb and
follow-ons, but this case never got addressed.
We still forbid attaching initPlans to a Gather node that's
inserted pursuant to debug_parallel_query = regress. That's because,
when we hide the Gather from EXPLAIN output, we'd hide the initPlans
too, causing cosmetic regression diffs. It seems inadvisable to
kluge EXPLAIN to the extent required to make the output look the
same, so just don't do it in that case.
Along the way, this also takes care of some sloppiness about updating
path costs to match when we move initplans from one place to another
during createplan.c and setrefs.c. Since all the planning decisions
are already made by that point, this is just cosmetic; but it seems
good to keep EXPLAIN output consistent with where the initplans are.
The diff in query_planner() might be worth remarking on. I found that
one because after fixing things to allow parallel-safe initplans, one
partition_prune test case changed plans (as shown in the patch) ---
but only when debug_parallel_query was active. The reason proved to
be that we only bothered to mark Result nodes as potentially
parallel-safe when debug_parallel_query is on. This neglects the fact
that parallel-safety may be of interest for a sub-query even though
the Result itself doesn't parallelize.
Discussion: https://postgr.es/m/1129530.1681317832@sss.pgh.pa.us
We are capable of optimizing MIN() and MAX() aggregates on indexed
columns into subqueries that exploit the index, rather than the normal
thing of scanning the whole table. When we do this, we replace the
Aggref node(s) with Params referencing subquery outputs. Such Params
really ought to be included in the per-plan-node extParam/allParam
sets computed by SS_finalize_plan. However, we've never done so
up to now because of an ancient implementation choice to perform
that substitution during set_plan_references, which runs after
SS_finalize_plan, so that SS_finalize_plan never sees these Params.
This seems like clearly a bug, yet there have been no field reports
of problems that could trace to it. This may be because the types
of Plan nodes that could contain Aggrefs do not have any of the
rescan optimizations that are controlled by extParam/allParam.
Nonetheless it seems certain to bite us someday, so let's fix it
in a self-contained patch that can be back-patched if we find a
case in which there's a live bug pre-v17.
The cleanest fix would be to perform a separate tree walk to do
these substitutions before SS_finalize_plan runs. That seems
unattractive, first because a whole-tree mutation pass is expensive,
and second because we lack infrastructure for visiting expression
subtrees in a Plan tree, so that we'd need a new function knowing
as much as SS_finalize_plan knows about that. I also considered
swapping the order of SS_finalize_plan and set_plan_references,
but that fell foul of various assumptions that seem tricky to fix.
So the approach adopted here is to teach SS_finalize_plan itself
to check for such Aggrefs. I refactored things a bit in setrefs.c
to avoid having three copies of the code that does that.
Given the lack of any currently-known bug, no test case here.
Discussion: https://postgr.es/m/2391880.1689025003@sss.pgh.pa.us
Before, if you went past about 64M array elements in array_agg() and
allied functions, you got a generic "invalid memory alloc request
size" error. This patch replaces that with "array size exceeds the
maximum allowed", which seems more user-friendly since it points you
to needing to reduce the size of your array result. (This is the
same error text you'd get from construct_md_array in the event of
overrunning the maximum physical size for the finished array.)
Per question from Shaozhong Shi. Since this hasn't come up often,
I don't feel a need to back-patch.
Discussion: https://postgr.es/m/CA+i5JwYtVS9z2E71PcNKAVPbOn4R2wuj-LqbJsYr_XOz73q7dQ@mail.gmail.com
In a61b1f7482, we failed to update transformFromClauseItem() and
buildNSItemFromLists() to set ParseNamespaceItem.p_perminfo causing
it to point to garbage.
Pointed out by Tom Lane.
Reported-by: Farias de Oliveira <matheusfarias519@gmail.com>
Discussion: https://postgr.es/m/3173476.1689286373%40sss.pgh.pa.us
Backpatch-through: 16
Presently, the privilege check for SET SESSION AUTHORIZATION checks
whether the original authenticated role was a superuser at
connection start time. Even if the role loses the superuser
attribute, its existing sessions are permitted to change session
authorization to any role.
This commit modifies this privilege check to verify the original
authenticated role currently has superuser. In the event that the
authenticated role loses superuser within a session authorization
change, the authorization change will remain in effect, which means
the user can still take advantage of the target role's privileges.
However, [RE]SET SESSION AUTHORIZATION will only permit switching
to the original authenticated role.
Author: Joseph Koshakow
Discussion: https://postgr.es/m/CAAvxfHc-HHzONQ2oXdvhFF9ayRnidPwK%2BfVBhRzaBWYYLVQL-g%40mail.gmail.com
Presently, the privilege check for SET SESSION AUTHORIZATION is
performed in session_authorization's assign_hook. A relevant
comment states, "It's OK because the check does not require catalog
access and can't fail during an end-of-transaction GUC
reversion..." However, we plan to add a catalog lookup to this
privilege check in a follow-up commit.
This commit moves this privilege check to the check_hook for
session_authorization. Like check_role(), we do not throw a hard
error for insufficient privileges when the source is PGC_S_TEST.
Author: Joseph Koshakow
Discussion: https://postgr.es/m/CAAvxfHc-HHzONQ2oXdvhFF9ayRnidPwK%2BfVBhRzaBWYYLVQL-g%40mail.gmail.com
Commit 89e46da5e5 allowed using BTREE indexes that are neither
PRIMARY KEY nor REPLICA IDENTITY on the subscriber during apply of
update/delete. This patch extends that functionality to also allow HASH
indexes.
We explored supporting other index access methods as well but they don't
have a fixed strategy for equality operation which is required by the
current infrastructure in logical replication to scan the indexes.
Author: Kuroda Hayato
Reviewed-by: Peter Smith, Onder Kalaci, Amit Kapila
Discussion: https://postgr.es/m/TYAPR01MB58669D7414E59664E17A5827F522A@TYAPR01MB5866.jpnprd01.prod.outlook.com
RelationReloadIndexInfo() is a fast-path used for index reloads in the
relation cache, and it has always forgotten about updating
indisreplident, which is something that would happen after an index is
selected for a replica identity. This can lead to incorrect cache
information provided when executing a command in a transaction context
that updates indisreplident.
None of the code paths currently on HEAD that need to check upon
pg_index.indisreplident fetch its value from the relation cache, always
relying on a fresh copy on the syscache. Unfortunately, this may not be
the case of out-of-core code, that could see out-of-date value.
Author: Shruthi Gowda
Reviewed-by: Robert Haas, Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/CAASxf_PBcxax0wW-3gErUyftZ0XrCs3Lrpuhq4-Z3Fak1DoW7Q@mail.gmail.com
Backpatch-through: 11
indisvalid is switched to true for partitioned indexes when all its
partitions have valid indexes when attaching a new partition, up to the
top-most parent if all its leaves are themselves valid when dealing with
multiple layers of partitions.
The copy of the tuple from pg_index used to switch indisvalid to true
came from the relation cache, which is incorrect. Particularly, in the
case reported by Shruthi Gowda, executing a series of commands in a
single transaction would cause the validation of partitioned indexes to
use an incorrect version of a pg_index tuple, as indexes are reloaded
after an invalidation request with RelationReloadIndexInfo(), a much
faster version than a full index cache rebuild. In this case, the
limited information updated in the cache leads to an incorrect version
of the tuple used. One of the symptoms reported was the following
error, with a replica identity update, for instance:
"ERROR: attempted to update invisible tuple"
This is incorrect since 8b08f7d, so backpatch all the way down.
Reported-by: Shruthi Gowda
Author: Michael Paquier
Reviewed-by: Shruthi Gowda, Dilip Kumar
Discussion: https://postgr.es/m/CAASxf_PBcxax0wW-3gErUyftZ0XrCs3Lrpuhq4-Z3Fak1DoW7Q@mail.gmail.com
Backpatch-through: 11
The "fsync" level already flushes drive write caches on Windows (as does
"fdatasync"), so it only confuses matters to have an apparently higher
level that isn't actually different at all.
That leaves "fsync_writethrough" only for macOS, where it actually does
something different.
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/CA%2BhUKGJ2CG2SouPv2mca2WCTOJxYumvBARRcKPraFMB6GSEMcA%40mail.gmail.com
The contents of the line whose parsing failed was not reported in the
error message produced by generate-wait_event_types.pl, making harder
than necessary the debugging of incorrectly-shaped entries in the file.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/ZK9S3jFEV1X797Ll@paquier.xyz
The double quotes used for the wait event names are not required, as
the values quoted are made of single words. The files generated by
generate-wait_event_types.pl (pgstat_wait_event.c, wait_event_types.h
and wait_event_types.sgml) are exactly the same before and after this
commit, hence the wait event names and the enum elements have the same
names as before.
Discussion: https://postgr.es/m/ZK9S3jFEV1X797Ll@paquier.xyz
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
When vac_truncate_clog() encounters bogus datfrozenxid / datminmxid values, it
returns early. Unfortunately, until now, it did not release
WrapLimitsVacuumLock. If the backend later tries to acquire
WrapLimitsVacuumLock, the session / autovacuum worker hangs in an
uncancellable way. Similarly, other sessions will hang waiting for the
lock. However, if the backend holding the lock exited or errored out for some
reason, the lock was released.
The bug was introduced as a side effect of 566372b3d6.
It is interesting that there are no production reports of this problem. That
is likely due to a mix of bugs leading to bogus values having gotten less
common, process exit releasing locks and instances of hangs being hard to
debug for "normal" users.
Discussion: https://postgr.es/m/20230621221208.vhsqgduwfpzwxnpg@awork3.anarazel.de
Commit 89e46da5e allowed REPLICA IDENTITY FULL tables to use an index
on the subscriber during apply of update/delete. This commit clarifies
in the documentation that the leftmost field of candidate indexes must
be a column (not an expression) that references the published relation
column.
The source code comments are also updated accordingly.
Reviewed-by: Peter Smith, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDJjffEvUFKXT27Q5U8-UU9JHv4rrJ9Ke8Zkc5UPWHLvA@mail.gmail.com
Backpatch-through: 16
Unlike the other implementations of getopt_long() I could find, the
in-tree implementation does not reorder non-options to the end of
argv. Instead, it returns -1 as soon as the first non-option is
found, even if there are other options listed afterwards. By
moving non-options to the end of argv, getopt_long() can parse all
specified options and return -1 when only non-options remain.
This quirk is periodically missed by hackers (e.g., 869aa40a27,
ffd398021c, and d9ddc50baf). This commit introduces the
aforementioned non-option reordering behavior to the in-tree
getopt_long() implementation.
Special thanks to Noah Misch for his help verifying behavior on
AIX.
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20230609232257.GA121461%40nathanxps13
A CaseTestExpr is currently being put into
JsonValueExpr.formatted_expr as placeholder for the result of
evaluating JsonValueExpr.raw_expr, which in turn is evaluated
separately. Though, there's no need for this indirection if
raw_expr itself can be embedded into formatted_expr and evaluated
as part of evaluating the latter, especially as there is no
special reason to evaluate it separately. So this commit makes it
so. As a result, JsonValueExpr.raw_expr no longer needs to be
evaluated in ExecInterpExpr(), eval_const_exprs_mutator() etc. and
is now only used for displaying the original "unformatted"
expression in ruleutils.c.
While at it, this also removes the function makeCaseTestExpr(),
because the code in makeJsonConstructorExpr() looks more readable
without it IMO and isn't used by anyone else either.
Finally, a note is added in the comment above CaseTestExpr's
definition that JsonConstructorExpr is also using it.
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
The first check on the enum values was not necessary as the values set
in wait_event_names.txt for the classes LWLock and Lock were able to
satisfy the check. The second check when generating the C and header
files is now based on a match of the class names, making it simpler to
understand.
Author: Masahiro Ikeda, Michael Paquier
Discussion: https://postgr.es/m/eaf82a85c0ef1b55dc3b651d3f7b867a@oss.nttdata.com
The special handling of negative attribute numbers in
ATExecAddColumn() was introduced to support SET WITH OIDS (commit
6d1e361852). But that feature doesn't exist anymore, so we can revert
to the previous, simpler version. In passing, also remove an obsolete
comment about OID support.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da@eisentraut.org
Previously we only allowed unique B-tree constraints on partitions
(and only if the constraint included all the partition keys). But we
could allow exclusion constraints with the same restriction. We also
require that those columns be compared for equality, not something
like &&.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/ec8b1d9b-502e-d1f8-e909-1bf9dffe6fa5@illuminatedcomputing.com
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
As coded, the row data strings generated for pgbench_accounts' COPY in
the client-side data generation were always assigning 0 for one of its
attributes. This simplifies a bit an upcoming patch to switch
client-side data generation of pgbench to use COPY for the teller and
branch tables, rather than individual INSERTs.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
This commit adds two columns: indexes_total and indexes_processed, to
pg_stat_progress_vacuum system view to show the index vacuum
progress. These numbers are reported in the "vacuuming indexes" and
"cleaning up indexes" phases.
This uses the new parallel message type for progress reporting added
by be06506e7.
Bump catversion because this changes the definition of
pg_stat_progress_vacuum.
Author: Sami Imseih
Reviewed by: Masahiko Sawada, Michael Paquier, Nathan Bossart, Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/5478DFCD-2333-401A-B2F0-0D186AB09228@amazon.com
This commit adds a new type of parallel message 'P' to allow a
parallel worker to poke at a leader to update the progress.
Currently it supports only incremental progress reporting but it's
possible to allow for supporting of other backend progress APIs in the
future.
There are no users of this new message type as of this commit. That
will follow in future commits.
Idea from Andres Freund.
Author: Sami Imseih
Reviewed by: Michael Paquier, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/5478DFCD-2333-401A-B2F0-0D186AB09228@amazon.com
Windows has similar functions with leading underscores. Previously, we
provided the rename via a macro in win32_port.h. In fact its functions
are not always good replacements for the Unix functions, since they
can't deal with UTF-8. They are only currently used by pg_locale.c,
which is careful to redirect to other Windows routines for UTF-8. Given
that portability hazard, it seem unlikely to be a good idea to encourage
any other code to think of these functions as being available outside
pg_locale.c. Any code that thinks it wants these functions probably
wants our wchar2char() or char2wchar() routines instead, or it won't
actually work on Windows in UTF-8 databases.
Furthermore, some major libc implementations including glibc don't have
them (they only have the standard variants without _l), so external code
is very unlikely to require them to exist.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKG%2Bt_CHPzEoPnKyARJBJgE9-GxNajJo6ZuSfRK_KWFO%2B6w%40mail.gmail.com
Since PostgresMain calls sigsetjmp, any local variables that are not
marked "volatile" have a risk of unspecified behavior. In practice
this means that when control returns via longjmp, such variables might
get reset to their values as of the time of sigsetjmp, depending on
whether the compiler chose to put them in registers or on the stack.
We were careful about this for "send_ready_for_query", but not the
other local variables.
In the case of the timeout_enabled flags, resetting them to
their initial "false" states is actually good, since we do
"disable_all_timeouts()" in the longjmp cleanup code path. If that
does not happen, we risk uselessly calling "disable_timeout()" later,
which is harmless but a little bit expensive. Let's explicitly reset
these flags so that the behavior is correct and platform-independent.
(This change means that we really don't need the new "volatile"
markings after all, but let's install them anyway since any change
in this logic could re-introduce a problem.)
There is no issue for "firstchar" and "input_message" because those
are explicitly reinitialized each time through the query processing
loop. To make that clearer, move them to be declared inside the loop.
That leaves us with all the function-lifespan locals except the
sigjmp_buf itself marked as volatile, which seems like a good policy
to have going forward.
Because of the possibility of extra disable_timeout() calls, this
seems worth back-patching.
Sergey Shinderuk and Tom Lane
Discussion: https://postgr.es/m/2eda015b-7dff-47fd-d5e2-f1a9899b90a6@postgrespro.ru
changeDependencyFor() returns the number of pg_depend entries changed,
or 0 if there is a problem. The callers of this routine expect only one
dependency to change, but they did not check for the result returned.
The following code paths gain checks:
- Namespace for extensions.
- Namespace for various object types (see AlterObjectNamespace).
- Planner support function for a function.
Some existing error messages related to all that are reworded to be more
consistent with the project style, and the new error messages added
follow the same style. This change has exposed one bug fixed a bit
earlier with bd5ddbe.
Reviewed-by: Heikki Linnakangas, Akshat Jaimini
Discussion: https://postgr.es/m/ZJzD/rn+UbloKjB7@paquier.xyz
As coded, the code would use as a base comparison the namespace OID from
the first object scanned in pg_depend when switching its namespace
dependency entry to the new one, and use it as a base of comparison for
any follow-up checks. It would also be used as the old namespace OID to
switch *from* for the extension's pg_depend entry. Hence, if the first
object scanned has a namespace different than the one stored in the
extension, we would finish by:
- Not checking that the extension objects map with the extension's
schema.
- Not switching the extension -> namespace dependency entry to the new
namespace provided by the user, making ALTER EXTENSION ineffective.
This issue exists since this command has been introduced in d9572c4 for
relocatable extension, so backpatch all the way down to 11. The test
case has been provided by Heikki, that I have tweaked a bit to show the
effects on pg_depend for the extension.
Reported-by: Heikki Linnakangas
Author: Michael Paquier, Heikki Linnakangas
Discussion: https://postgr.es/m/20eea594-a05b-4c31-491b-007b6fceef28@iki.fi
Backpatch-through: 11
Comments in src/backend/libpq/auth.c say: (after successfully finding
the final DN to check the user-supplied password against)
/* Unbind and disconnect from the LDAP server */
and later
/*
* Need to re-initialize the LDAP connection, so that we can bind to
* it with a different username.
*/
But the protocol actually permits multiple subsequent authentications
("binds") over a single connection.
So, it seems like the whole connection re-initialization thing was
just a confusion and can be safely removed, thus saving quite a few
network round-trips, especially for the case of ldaps/starttls.
Author: Anatoly Zaretsky <anatoly.zaretsky@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALbq6kmJ-1+58df4B51ctPfTOSyPbY8Qi2=ct8oR=i4TamkUoQ@mail.gmail.com
Historically this module dealt with thread-safety of system interfaces,
but now all that's left is wrapper code for user name and home directory
lookup. Arguably the Windows variants of this logic could be moved in
here too, to justify its presence under port. For now, just tidy up
some obsolete references to multi-threading, and give the file a
meaningful name.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
locale_t is defined by POSIX.1-2008 and SUSv4, and available on all
targeted systems. For Windows, win32_port.h redirects to a partial
implementation called _locale_t. We can now remove a lot of
compile-time tests for HAVE_LOCALE_T, and associated comments and dead
code branches that were needed for older computers.
Since configure + MinGW builds didn't detect locale_t but now we assume
that all systems have it, further inconsistencies among the 3 Windows build
systems were revealed. With this commit, we no longer define
HAVE_WCSTOMBS_L and HAVE_MBSTOWCS_L on any Windows build system, but
we have logic to deal with that so that replacements are available where
appropriate.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGLg7_T2GKwZFAkEf0V7vbnur-NfCjZPKZb%3DZfAXSV1ORw%40mail.gmail.com
Commit e213de8e78 fixed a problem with path lengths to a tempdir on
Windows, but caused problems on at least some Unix systems where the
system tempdir is on a different file system. To work around this, only
used the system temdir for the destination of pg_replslot on Windows,
and otherwise restore the old behaviour.
Backpatch to relase 14 like the previous patch.
Problem exposed by a myriad of buildfarm animals.
The symlink to a longer location tripped up some Windows limit on
buildfarm animal fairywren when running with meson, which uses slightly
longer paths.
Backpatch to release 14 to keep the script in sync. Before that the
script skipped all symlink related tests on Windows.
Commit 19d8e2308b allowed a weaker check for HOT with summarizing
indexes, but it did not update README.HOT. So do that now.
Patch by Matthias van de Meent, minor changes by me. Backpatch to 16,
where the optimization was introduced.
Author: Matthias van de Meent
Reviewed-by: Tomas Vondra
Backpatch-through: 16
Discussion: https://postgr.es/m/CAEze2WiEOm8V+c9kUeYp2BPhbEc5s473fUf51xNeqvSFGv44Ew@mail.gmail.com
The restrictedToken handle was set but never read, so remove the
variable and change to a boolean style check to match other uses
of CreateRestrictedProcess().
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/62A63C81-3893-4E3F-A34E-2081DF67074E@yesql.se
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
We create a file, so we better WAL-log it. In practice, all the
built-in index AMs and all extensions that I'm aware of write a
metapage to the init fork, which is WAL-logged, and replay of the
metapage implicitly creates the fork too. But if ambuildempty() didn't
write any page, we would miss it.
This can be seen with dummy_index_am. Set up replication, create a
'dummy_index_am' index on an unlogged table, and look at the files
created in the replica: the init fork is not created on the
replica. Dummy_index_am doesn't do anything with the relation files,
however, so it doesn't lead to any user-visible errors.
Backpatch to all supported versions.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9%40iki.fi
This is useful to show the allocation state of huge pages when setting
up a server with "huge_pages = try", where allocating huge pages would
be attempted but the server would continue its startup sequence even if
the allocation fails. The effective status of huge pages is not easily
visible without OS-level tools (or for instance, a lookup at
/proc/N/smaps), and the environments where Postgres runs may not
authorize that. Like the other GUCs related to huge pages, this works
for Linux and Windows.
This GUC can report as values:
- "on", if huge pages were allocated.
- "off", if huge pages were not allocated.
- "unknown", a special state that could only be seen when using for
example postgres -C because it is only possible to know if the shared
memory allocation worked after we can check for the GUC values, even if
checking a runtime-computed GUC. This value should never be seen when
querying for the GUC on a running server. An assertion is added to
check that.
The discussion has also turned around having a new function to grab this
status, but this would have required more tricks for -DEXEC_BACKEND,
something that GUCs already handle.
Noriyoshi Shinoda has initiated the thread that has led to the result of
this commit.
Author: Justin Pryzby
Reviewed-by: Nathan Bossart, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/TU4PR8401MB1152EBB0D271F827E2E37A01EECC9@TU4PR8401MB1152.NAMPRD84.PROD.OUTLOOK.COM
The header file wait_event_types.h was generated without a newline at
its end, which was inconsistent with all the other things generated
automatically.
Per offline gripe from Nathan Bossart.
This commit reverts the work done by commits 3ba59ccc89 and 72e78d831a.
Those commits were incorrect in asserting that we never acquire any other
heavy-weight lock after acquring page lock other than relation extension
lock. We can acquire a lock on catalogs while doing catalog look up after
acquring page lock.
This won't impact any existing feature but we need to think some other way
to achieve this before parallelizing other write operations or even
improving the parallelism in vacuum (like allowing multiple workers
for an index).
Reported-by: Jaime Casanova
Author: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAJKUy5jffnRKNvRHKQ0LynRb0RJC-o4P8Ku3x9vGAVLwDBWumQ@mail.gmail.com
This commit comes as a continuation of the discussion that has led to
d522b05, as \v was handled inconsistently when parsing array values or
anything going through the parsers, and changing a parser behavior in
stable branches is a scary thing to do. The parsing of array values now
uses the more central scanner_isspace() and array_isspace() is removed.
As pointing out by Peter Eisentraut, fix a confusing reference to
horizontal space in the parsers with the term "horiz_space". \f was
included in this set since 3cfdd8f from 2000, but it is not horizontal.
"horiz_space" is renamed to "non_newline_space", to refer to all
whitespace characters except newlines.
The changes impact the parsers for the backend, psql, seg, cube, ecpg
and replication commands. Note that JSON should not escape \v, as per
RFC 7159, so these are not touched.
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/ZJKcjNwWHHvw9ksQ@paquier.xyz
llvm_release_context() called llvm_enter_fatal_on_oom(), but was missing
the corresponding llvm_leave_fatal_on_oom() call. As a result, if JIT was
used at all, we were almost always in the "fatal-on-oom" state.
It only makes a difference if you use an extension written in C++, and
run out of memory in a C++ 'new' call. In that case, you would get a
PostgreSQL FATAL error, instead of the default behavior of throwing a
C++ exception.
Back-patch to all supported versions.
Reviewed-by: Daniel Gustafsson
Discussion: https://www.postgresql.org/message-id/54b78cca-bc84-dad8-4a7e-5b56f764fab5@iki.fi
Most, but not all, of our "/*----" style comments have an end-guard
line with dashes at the end of the comment. However, pgindent doesn't
care about the end-guards, so they mostly just waste screen
space. Going forward, let's not require end-guards.
Remove a broken end-guard in a comment in walsender.c that led me to
think about this. Remove the end guard from another comment in
walsender.c for consistency, so that we use the same style in all
comments in the file.
However, we have thousands of existing "/*----" comments the repository,
so it's not worth the code churn to change them all.
Discussion: https://www.postgresql.org/message-id/fb083c91-d490-3b65-25f3-05e9118b6b0d%40iki.fi
BuildEventTriggerCache sets up a context "EventTriggerCache" which
house a hash named "Event Trigger Cache", which in turn creates a
context with the table name. This generated log output for memory
context dumps like below:
LOG: level: 2; EventTriggerCache: 8192 total in 1 blocks; 7928 free (4 chunks); 264 used
LOG: level: 3; Event Trigger Cache: 8192 total in 1 blocks; 2616 free (0 chunks); 5576 used
This renames the hash to ensure that the hash context has a unique
name for easier log reading and debugging.
Discussion: https://postgr.es/m/5EDC969E-CAE3-4CBD-965E-3B8A1294CFA4@yesql.se
Commit 7b64e4b3 taught DropSubscription() to drop stats entry of
subscription that is not associated with a replication slot for apply
worker at DROP SUBSCRIPTION but missed covering the case where the
subscription is not associated with replication slots for both apply
worker and tablesync worker.
Also add a test to verify that the stats for slot-less subscription is
removed at DROP SUBSCRIPTION time.
Backpatch down to 15.
Author: Masahiko Sawada
Reviewed-by: Nathan Bossart, Hayato Kuroda, Melih Mutlu, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoB71zkP7uPT7JDPsZcvp0749ExEQnOJxeNKPDFisHar+w@mail.gmail.com
Backpatch-through: 15
Several commands internally assemble command lines to call other
commands. This includes initdb, pg_dumpall, and pg_regress. (Also
pg_ctl, but that is different enough that I didn't consider it here.)
This has all evolved a bit organically, with fixed-size buffers, and
various optional command-line arguments being injected with
confusing-looking code, and the spacing between options handled in
inconsistent ways. Clean all this up a bit to look clearer and be
more easily extensible with new arguments and options. We start each
command with printfPQExpBuffer(), and then append arguments as
necessary with appendPQExpBuffer(). Also standardize on using
initPQExpBuffer() over createPQExpBuffer() where possible. pg_regress
uses StringInfo instead of PQExpBuffer, but many of the same ideas
apply.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/16d0beac-a141-e5d3-60e9-323da75f49bf@eisentraut.org
The documentation and the code is generated automatically from a new
file called wait_event_names.txt, formatted in sections dedicated to
each wait event class (Timeout, Lock, IO, etc.) with three tab-separated
fields:
- C symbol in enums
- Format in the system views
- Description in the docs
Using this approach has several advantages, as we have proved to be
rather bad in maintaining this area of the tree across the years:
- The order of each item in the documentation and the code, which should
be alphabetical, has become incorrect multiple times, and the script
generating the code and documentation has a few rules to enforce that,
making the maintenance a no-brainer.
- Some wait events were added to the code, but not documented, so this
cannot be missed now.
- The order of the tables for each wait event class is enforced in the
documentation (the input .txt file does so as well for clarity, though
this is not mandatory).
- Less code, shaving 1.2k lines from the tree, with 1/3 of the savings
coming from the code, the rest from the documentation.
The wait event types "Lock" and "LWLock" still have their own code path
for their code, hence only the documentation is created for them. These
classes are listed with a special marker called WAIT_EVENT_DOCONLY in
the input file.
Adding a new wait event now requires only an update of
wait_event_names.txt, with "Lock" and "LWLock" treated as exceptions.
This commit has been tested with configure/Makefile, the CI and VPATH
build. clean, distclean and maintainer-clean were working fine.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
Clear any potential stale next_phase_at value from the snapshot
builder which otherwise may trip an assertion check ensuring
that there is no next_phase_at value.
This can be reproduced by running 80 concurrent sessions like
the below where $c is a loop counter (assumes there has been
1..$c databases created) :
echo "
CREATE TABLE replication_example(id SERIAL PRIMARY KEY,
somedata int,
text varchar(120));
SELECT 'init' FROM
pg_create_logical_replication_slot('regression_slot_$c',
'test_decoding');
SELECT data FROM
pg_logical_slot_get_changes('regression_slot_$c', NULL,
NULL, 'include-xids', '0',
'skip-empty-xacts', '1');
" | psql -d regress_$c >>psql.log &
Backpatch down to v16.
Bug: #17695
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reported-by: bowenshi <zxwsbg@qq.com>
Discussion: https://postgr.es/m/17695-6be9277c9295985f@postgresql.org
Backpatch-through: v16
If you create a table and don't insert any data into it, the relation file
is never fsync'd. You don't lose data, because an empty table doesn't have
any data to begin with, but if you crash and lose the file, subsequent
operations on the table will fail with "could not open file" error.
To fix, register an fsync request in mdcreate(), like we do for mdwrite().
Per discussion, we probably should also fsync the containing directory
after creating a new file. But that's a separate and much wider issue.
Backpatch to all supported versions.
Reviewed-by: Andres Freund, Thomas Munro
Discussion: https://www.postgresql.org/message-id/d47d8122-415e-425c-d0a2-e0160829702d%40iki.fi
This removes md5() function calls from these test suites:
- bloom
- test_decoding
- isolation
- recovery
- subscription
This covers all remaining test suites where md5() calls were just used
to generate some random data and can be replaced by appropriately
adapted sha256() calls. This will eventually allow these tests to
pass in OpenSSL FIPS mode (which does not allow MD5 use). See also
208bf364a9. Unlike for the main regression tests, I didn't write a
fipshash() wrapper here, because that would have been too repetitive
and wouldn't really save much here. In some cases it was easier to
remove one layer of indirection by changing column types from text to
bytea.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/f9b480b5-e473-d2d1-223a-4b9db30a229a@eisentraut.org
Previously an "amcanorderbyop" index would only be used when the index
could provide sorted results which satisfied all query_pathkeys. Here
we relax this so that we also allow these indexes to be considered by the
planner when they only provide partially sorted results. This allows the
planner to later consider making use of an Incremental Sort to satisfy the
remaining pathkeys. This change is particularly useful for KNN-type
queries which contain a LIMIT clause and an additional ORDER BY clause for
a non-indexed column.
Author: Miroslav Bendik
Reviewed-by: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAPoEpV0QYDtzjwamwWUBqyWpaCVbJV2d6qOD7Uy09bWn47PJtw%40mail.gmail.com
The following routines are added to libpq:
PGresult *PQclosePrepared(PGconn *conn, const char *stmt);
PGresult *PQclosePortal(PGconn *conn, const char *portal);
int PQsendClosePrepared(PGconn *conn, const char *stmt);
int PQsendClosePortal(PGconn *conn, const char *portal);
The "send" routines are non-blocking versions of the two others.
Close messages are part of the protocol but they did not have a libpq
implementation. And, having these routines is for instance useful with
connection poolers as these can detect more easily Close messages
than DEALLOCATE queries.
The implementation takes advantage of what the Describe routines rely on
for portals and statements. Some regression tests are added in
libpq_pipeline, for the four new routines, by closing portals and
statements created already by the tests.
Author: Jelte Fennema
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAGECzQTb4xFAopAVokudB+L62Kt44mNAL4Z9zZ7UTrs1TRFvWA@mail.gmail.com
It's OK to be lazy about re-binning memory segments when allocating,
because that can only leave segments in a bin that's too high. We'll
search higher bins if necessary while allocating next time, and
also eventually re-bin, so no memory can become unreachable that way.
However, when freeing memory, the largest contiguous range of free pages
might go up, so we should re-bin eagerly to make sure we don't leave the
segment in a bin that is too low for get_best_segment() to find.
The re-binning code is moved into a function of its own, so it can be
called whenever free pages are returned to the segment's free page map.
Back-patch to all supported releases.
Author: Dongming Liu <ldming101@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAL1p7e8LzB2LSeAXo2pXCW4%2BRya9s0sJ3G_ReKOU%3DAjSUWjHWQ%40mail.gmail.com
Prior to this, Bitmapsets could contain trailing words which had no
members set. Many places in bitmapset.c had to loop over trailing words
to check for empty words. If we ensure we always remove these trailing
zero words then we can perform various optimizations such as fast
pathing bms_is_subset to return false when 'a' has more words than 'b'.
A similar optimization is possible in bms_equal. Both of these together
can yield quite significant performance increases in the query planner
when querying a partitioned table with around 100 or more partitions.
While we're at it, since the minimum number of words a Bitmapset can
contain is 1, we can make use of do/while loops instead of for loops
when looping over all words in a set. This means checking the loop
condition 1 less time, which for single-word sets cuts the loop
condition checks in half.
Author: David Rowley
Reviewed-by: Yuya Watari
Discussion: https://postgr.es/m/CAApHDvr5O41MuUjw0DQKqmAnv7QqvmLqXReEd5o4nXTzWp8-+w@mail.gmail.com
This commit increases the size of the bgw_library_name member of
the BackgroundWorker struct from BGW_MAXLEN (96) bytes to MAXPGPATH
(default of 1024) bytes so that it can store longer file names
(e.g., absolute paths).
Author: Yurii Rashkovskii
Reviewed-by: Daniel Gustafsson, Aleksander Alekseev
Discussion: https://postgr.es/m/CA%2BRLCQyjFV5Y8tG5QgUb6gjteL4S3p%2B1gcyqWTqigyM93WZ9Pg%40mail.gmail.com
The ginfast.c code previously checked for conflicts in before locking
the relevant buffer, leaving a window where a RW conflict could be
missed. Re-order.
There was also a place where buffer ID and block number were confused
while trying to predicate-lock a page, noted by visual inspection.
Back-patch to all supported releases. Fixes one more problem discovered
with the reproducer from bug #17949, in this case when Dmitry tried
other index types.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reported-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When performing a bitmap heap scan, we don't want to miss concurrent
writes that occurred after we observed the heap's rs_nblocks, but before
we took predicate locks on index pages. Therefore, we can't skip
fetching any heap tuples that are referenced by the index, because we
need to test them all with CheckForSerializableConflictOut(). The
old optimization that would ignore any references to blocks >=
rs_nblocks gets in the way of that requirement, because it means that
concurrent writes in that window are ignored.
Removing that optimization shouldn't affect correctness at any isolation
level, because any new tuples shouldn't be visible to an MVCC snapshot.
There also shouldn't be any error-causing references to heap blocks past
the end, because we should have held at least an AccessShareLock on the
table before the index scan. It can't get smaller while our transaction
is running. For now, though, we'll keep the optimization at lower
levels to avoid making unnecessary changes in a bug fix.
Back-patch to all supported releases. In release 11, the code is in a
different place but not fundamentally different. Fixes one aspect of
bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
When predicate-locking btrees, we have a special case for completely
empty btrees, since there is no page to lock. This was racy, because,
without buffer lock held, a matching key could be inserted between the
_bt_search() and the PredicateLockRelation() calls.
Fix, by rechecking _bt_search() after taking the relation-level SIREAD
lock, if using SERIALIZABLE isolation and an empty btree is discovered.
Back-patch to all supported releases. Fixes one aspect of bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
Unlike commands such as CREATE DATABASE, ProcessStartupPacket()
does not perform multibyte-aware truncation of overlength names.
This means that connection attempts might fail even if the user
provides the same overlength names that were used in CREATE
DATABASE, CREATE ROLE, etc. Ideally, we'd do the same multibyte-
aware truncation in both code paths, but it doesn't seem worth the
added complexity of trying to discover the encoding of the names.
Instead, let's simply skip truncating the names in the startup
packet and let the user/database lookup fail later on. With this
change, users must provide the exact names stored in the catalogs,
even if the names were truncated.
This reverts commit d18c1d1f51.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Tom Lane
Discussion: https://postgr.es/m/07436793-1426-29b2-f924-db7422a05fb7%40gmail.com
When table_block_relation_estimate_size() estimated the number of tuples
in a relation without statistics (e.g. right after load), it did not
consider fillfactor when calculating density. With non-default
fillfactor values, this may result in significant overestimate of the
number of tuples - up to 10x with the minimum 10% fillfactor. This may
have unexpected consequences, e.g. when creating hash indexes.
This considers the current fillfactor value in the "no statistics" code
path. If the fillfactor changes after loading data into the table, the
estimate may be off. But that seems much less likely than changing the
fillfactor before the data load.
Reviewed-by: Corey Huinker, Peter Eisentraut
Discussion: https://postgr.es/m/cf154ef9-6bac-d268-b735-67a3443debba@enterprisedb.com
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
The VacAttrStats structure contained the whole Form_pg_attribute for a
column, but it actually only needs attstattarget from there. So
remove the Form_pg_attribute field and make a separate field for
attstattarget. This simplifies some code for extended statistics that
doesn't deal with a column but an expression, which had to fake up
pg_attribute rows to satisfy internal APIs. Also, we can remove some
comments that essentially said "don't look at pg_attribute directly".
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/d6069765-5971-04d3-c10d-e4f7b2e9c459%40eisentraut.org
Here are some notes about this change:
- As X509_get_signature_nid() should always exist (OpenSSL and
LibreSSL), hence HAVE_X509_GET_SIGNATURE_NID is now gone.
- OPENSSL_API_COMPAT is bumped to 0x10002000L.
- One comment related to 1.0.1e introduced by 74242c2 is removed.
Upstream OpenSSL still provides long-term support for 1.0.2 in a closed
fashion, so removing it is out of scope for a few years, at least.
Reviewed-by: Jacob Champion, Daniel Gustafsson
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
The following changes are done:
- Addition of WaitEventBufferPin and WaitEventExtension, that hold a
list of wait events related to each category.
- Addition of two functions that encapsulate the list of wait events for
each category.
- Rename BUFFER_PIN to BUFFERPIN (only this wait event class used an
underscore, requiring a specific rule in the automation script).
These changes make a bit easier the automatic generation of all the code
and documentation related to wait events, as all the wait event
categories are now controlled by consistent structures and functions.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/c6f35117-4b20-4c78-1df5-d3056010dcf5@gmail.com
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
When set, this environment variable was only effective for data
directories but not for all the other temporary files created by
PostgreSQL::Test::Utils. Keeping the temporary files after a successful
run can be useful for debugging purposes.
The documentation is updated to reflect the new behavior, with contents
available in doc/ since v16 and in src/test/perl/README since v15.
Author: Jacob Champion
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAAWbhmgHtDH1SGZ+Fw05CsXtE0mzTmjbuUxLB9mY9iPKgM6cUw@mail.gmail.com
Discussion: https://postgr.es/m/YyPd9unV14SX2bLF@paquier.xyz
Backpatch-through: 11
Here we adjust the query planner to have it remove items from a window
clause's PARTITION BY clause in cases where the pathkey for a column in
the PARTITION BY clause is redundant.
Doing this allows the optimization added in 9d9c02ccd to stop window
aggregation early rather than going into "pass-through" mode to find
tuples belonging to the next partition. Also, when we manage to remove
all PARTITION BY columns, we now no longer needlessly check that the
current tuple belongs to the same partition as the last tuple in
nodeWindowAgg.c. If the pathkey was redundant then all tuples must
contain the same value for the given redundant column, so there's no point
in checking that during execution.
Author: David Rowley
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvo2ji+hdxrxfXtRtsfSVw3to2o1nCO20qimw0dUGK8hcQ@mail.gmail.com
Commit dd38ff28ad added a new error message "missing contrecord" when
we fail to reassemble a record. Unfortunately that caused noisy
messages to be logged by pg_waldump at end of segment, and by walsender
when asked to shut down on a segment boundary.
Remove the new error message, so that this condition signals end-of-
WAL without a message. It's arguably a reportable condition that should
not be silenced while performing crash recovery, but fixing that without
introducing noise in the other cases will require more research.
Back-patch to 15.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://postgr.es/m/6a1df56e-4656-b3ce-4b7a-a9cb41df8189%40enterprisedb.com
Commit f24523672d fixed a memory leak by moving the modifiedCols bitmap
into the per-row memory context. In the case of AFTER UPDATE triggers,
the bitmap is however referenced from an event kept until the end of the
query, resulting in a use-after-free bug.
Fixed by copying the bitmap into the AfterTriggerEvents memory context,
which is the one where we keep the trigger events. There's only one
place that needs to do the copy, but the memory context may not exist
yet. Doing that in a separate function seems more readable.
Report by Alexander Pyhalov, fix by me. Backpatch to 13, where the
bitmap was added to the event by commit 71d60e2aa0.
Reported-by: Alexander Pyhalov
Backpatch-through: 13
Discussion: https://postgr.es/m/acddb17c89b0d6cb940eaeda18c08bbe@postgrespro.ru
The Incremental Sort had a couple issues, resulting in leaking memory
during rescans, possibly triggering OOM. The code had a couple of
related flaws:
1. During rescans, the sort states were reset but then also set to NULL
(despite the comment saying otherwise). ExecIncrementalSort then
sees NULL and initializes a new sort state, leaking the memory used
by the old one.
2. Initializing the sort state also automatically rebuilt the info about
presorted keys, leaking the already initialized info. presorted_keys
was also unnecessarily reset to NULL.
Patch by James Coleman, based on patches by Laurenz Albe and Tom Lane.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman, Laurenz Albe, Tom Lane
Reported-by: Laurenz Albe, Zu-Ming Jiang
Backpatch-through: 13
Discussion: https://postgr.es/m/b2bd02dff61af15e3526293e2771f874cf2a3be7.camel%40cybertec.at
Discussion: https://postgr.es/m/db03c582-086d-e7cd-d4a1-3bc722f81765%40inf.ethz.ch
Per the code coverage report, the existing regression tests did not
exercice some a couple important BRIN minmax-multi code paths.
- The tests focused on testing planning with a range of scan key
strategies, but not the execution. Fixed by adding queries that
actually test query execution for both equality and inequality.
- All tests created indexes after inserting data, but this only
exercises the CREATE INDEX strategy that sees all values at once, not
incremental summary updates. The new tests flip the order and create
the index before adding data.
- The assert check(s) validating correctness of expanded ranges were
present only in the "union" code path, which is not covered by
regression tests at all (as it requires concurrency etc.). Fixed by
adding the asserts to a couple more places.
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/57020b2e-d9c9-9bc7-4892-b36d9bb07563%40enterprisedb.com
Move the calculation of Bloom filter parameters (for BRIN indexes) into
a separate function to make reuse easier. At the moment we only call it
from one place, but that may change and it's easier to read anyway.
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/0e1f3350-c9cf-ab62-43a5-5dae314de89c%40enterprisedb.com
BRIN bloom and minmax-multi opclasses were somewhat inconsistent when
dealing with bool variables, assigning to them Datum values etc. While
not a bug, it makes the code harder to understand, so fix that.
While at it, update an incorrect comment copied to bloom opclass from
minmax, talking about strategies not supported by bloom.
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/0e1f3350-c9cf-ab62-43a5-5dae314de89c%40enterprisedb.com
This patch is a preliminary refactoring for an upcoming patch aimed at
adding new options to this tool, and using long options for these is
more user-friendly. The existing short options gain long flavors, as
of:
* -d/--debug
* -n/--dry-run
* -x/--strip-extension
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
The logic that introduced partitioned indexes missed a few things when
invalidating a partitioned index when these are created, still the code
is written to handle recursions:
1) If created from scratch because a mapping index could not be found,
the new index created could be itself invalid, if for example it was a
partitioned index with one of its leaves invalid.
2) A CCI was missing when indisvalid is set for a parent index, leading
to inconsistent trees when recursing across more than one level for a
partitioned index creation if an invalidation of the parent was
required.
This could lead to the creation of a partition index tree where some of
the partitioned indexes are marked as invalid, but some of the parents
are marked valid, which is not something that should happen (as
validatePartitionedIndex() defines, indisvalid is switched to true for a
partitioned index iff all its partitions are themselves valid).
This patch makes sure that indisvalid is set to false on a partitioned
index if at least one of its partition is invalid. The flag is set to
true if *all* its partitions are valid.
The regression test added in this commit abuses of a failed concurrent
index creation, marked as invalid, that maps with an index created on
its partitioned table afterwards.
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin
Discussion: https://postgr.es/m/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
The following patterns are added for CREATE SCHEMA:
- AUTHORIZATION, without a schema name or after a schema name.
- Possible list of owner roles after AUTHORIZATION.
- CREATE and GRANT within the supported set of commands.
- Correct object types supported in an embedded CREATE SCHEMA command.
While on it, this commit adjusts the completion done after CREATE
UNLOGGED:
- Addition of SEQUENCE.
- Avoid suggesting MATERIALIZED VIEW in CREATE TABLE.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Suraj Khamkar, Michael Paquier
Discussion: https://postgr.es/m/8735snihmz.fsf@wibble.ilmari.org
Using at least perl 5.14 is required since 4c15327, meaning that it is
possible to use named captures and the %+ hash instead of having to
count parenthesis groups manually.
While on it, CATALOG is made more flexible in its handling of
whitespaces for parameter lists (see the addition of \s* in this
case). The generated postgres.bki remains exactly the same before and
after this commit.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/87y1l3s7o9.fsf@wibble.ilmari.org
ALTER TABLE .. SET ACCESS METHOD was not registering a dependency to the
new access method with the relation altered in its rewrite phase, making
possible the drop of an access method even if there are relations that
depend on it. During the rewrite, a temporary relation is created to
build the new relation files before swapping the new and old files, and,
while the temporary relation was registering a correct dependency to the
new AM, the old relation did not do that. A dependency on the access
method is added when the relation files are swapped, which is the point
where pg_class is updated.
Materialized views and tables use the same code path, hence both were
impacted.
Backpatch down to 15, where this command has been introduced.
Reported-by: Alexander Lakhin
Reviewed-by: Nathan Bossart, Andres Freund
Discussion: https://postgr.es/m/18000-9145c25b1af475ca@postgresql.org
Backpatch-through: 15
An outer join cannot be formed using an input path that is parameterized
by a value that is supposed to be nulled by the outer join. This is
obviously nonsensical, and it could lead to a bad plan being selected;
although currently it seems that we'll hit various sanity-check
assertions first.
I think that such cases were formerly prevented by the delay_upper_joins
mechanism, but now that that's gone we need an explicit check.
(Perhaps we should avoid generating baserel paths that could
lead to this situation in the first place; but it seems like
having a defense at the join level would be a good idea anyway.)
Richard Guo and Tom Lane, per report from Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5g2uZRrUDZJ8p-=giwcSHVUn0c9nmdxPSY0jF0Ov8VoEA@mail.gmail.com
If the given composite datum is toasted out-of-line,
DatumGetHeapTupleHeader will perform database accesses to detoast it.
That can invalidate the result of get_cached_rowtype, as documented
(perhaps not plainly enough) in that function's API spec; which leads
to strange errors or crashes when we try to use the TupleDesc to read
the tuple. In short then, trying to update a field of a composite
column could fail intermittently if the overall column value is wide
enough to require toasting.
We can fix the bug at no cost by just changing the order of
operations, since we don't need the TupleDesc until after detoasting.
(Other callers of get_cached_rowtype appear to get this right already,
so there's only one bug.)
Note that the added regression test case reveals this bug reliably
only with debug_discard_caches/CLOBBER_CACHE_ALWAYS.
Per bug #17994 from Alexander Lakhin. Sadly, this patch does not fix
the missing-values issue revealed in the bug discussion; we'll need
some more work to cover that.
Discussion: https://postgr.es/m/17994-5c7100b51b4790e9@postgresql.org
It was walking into the ColumnDef->compression field, which is not a
node but a string. This code is currently not reachable (because the
compression field is only set in situations that don't go through
raw_expression_tree_walker()), but if it had been, this could have
behaved erratically.
Not including the timeline IDs to the file names generated by pg_waldump
for the individual blocks saved could cause some of these files to be
overwritten when scanning segments across multiple timelines. Having
this information is also as much useful as the LSNs, to be able to know
from exactly which WAL segment a block is comes from.
While on it, this fixes a few comments in the tests, where the format of
the file was not described as matching with the reality.
Reported-by: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, David Christensen
Discussion: https://postgr.es/m/ZJp921+nITFnvBVS@paquier.xyz
A portion of ALTER TABLE .. ATTACH PARTITION is to ensure that the
partition being attached to the partitioned table has a correct set of
indexes, so as there is a consistent index mapping between the
partitioned table and its new-to-be partition. However, as introduced
in 8b08f7d, the current logic could choose an invalid index as a match,
which is something that can exist when dealing with more than two levels
of partitioning, like attaching a partitioned table (that has
partitions, with an index created by CREATE INDEX ON ONLY) to another
partitioned table.
A partitioned index with indisvalid set to false is equivalent to an
incomplete partition tree, meaning that an invalid partitioned index
does not have indexes defined in all its partitions. Hence, choosing an
invalid partitioned index can create inconsistent partition index trees,
where the parent attaching to is valid, but its partition may be
invalid.
In the report from Alexander Lakhin, this showed up as an assertion
failure when validating an index. Without assertions enabled, the
partition index tree would be actually broken, as indisvalid should
be switched to true for a partitioned index once all its partitions are
themselves valid. With two levels of partitioning, the top partitioned
table used a valid index and was able to link to an invalid index stored
on its partition, itself a partitioned table.
I have studied a few options here (like the possibility to switch
indisvalid to false for the parent), but came down to the conclusion
that we'd better rely on a simple rule: invalid indexes had better never
be chosen, so as the partition attached uses and creates indexes that
the parent expects. Some regression tests are added to provide some
coverage. Note that the existing coverage is not impacted.
This is a problem since partitioned indexes exist, so backpatch all the
way down to v11.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/14987634-43c0-0cb3-e075-94d423607e08@gmail.com
Backpatch-through: 11
Since 3db72eb, the query ID of utilities is generated using the Query
structure, making the use of the query string in JumbleQuery()
unnecessary. This commit removes the argument "querytext" from
JumbleQuery().
Reported-by: Joe Conway
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/ZJlQAWE4COFqHuAV@paquier.xyz
TParserGet() recurses for some token types, meaning it's possible
to drive it to stack overflow. Since this is a minority behavior,
I chose to add the check_stack_depth() call to the two places that
recurse rather than doing it during every single call.
While at it, add CHECK_FOR_INTERRUPTS(), because this can run
unpleasantly long for long inputs.
Per bug #17995 from Zuming Jiang. This is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/17995-9f20ff3e6389db4c@postgresql.org
One of the tests for the pipeline mode with portal description expects a
non-NULL PQgetResult, but used an incorrect error message on failure,
telling that PQgetResult being NULL was the expected result.
Author: Jelte Fennema
Discussion: https://postgr.es/m/CAGECzQTkShHecFF+EZrm94Lbsu2ej569T=bz+PjMbw9Aiioxuw@mail.gmail.com
Backpatch-through: 14
ff9618e82a introduced has_partition_ancestor_privs(), which is used
to check whether a user has MAINTAIN on any partition ancestors.
This involves syscache lookups, and presently this function does
not take any relation locks, so it is likely subject to the same
kind of cache lookup failures that were fixed by 19de0ab23c.
To fix this problem, this commit partially reverts ff9618e82a.
Specifically, it removes the partition-related changes, including
the has_partition_ancestor_privs() function mentioned above. This
means that MAINTAIN on a partitioned table is no longer sufficient
to perform maintenance commands on its partitions. This is more
like how privileges for maintenance commands work on supported
versions. Privileges are checked for each partition, so a command
that flows down to all partitions might refuse to process them
(e.g., if the current user doesn't have MAINTAIN on the partition).
In passing, adjust a few related comments and error messages, and
add a test for the privilege checks for CLUSTER on a partitioned
table.
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/20230613211246.GA219055%40nathanxps13
Avoid "right sibling %u of block %u is not next child" errors when
vacuuming a corrupt nbtree index. Just LOG the issue and press on.
That way VACUUM will have a decent chance of finishing off all required
processing for the index (and for the table as a whole).
This is similar to recent work from commit 5abff197, as well as work
from commit 5b861baa (later backpatched as commit 43e409ce), which
taught nbtree VACUUM to keep going when its "re-find" check fails. The
hardening added by this commit takes place directly after the "re-find"
check, right before the critical section for the first stage of page
deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=dayg0vjs4+er84TS9ami=csdzjpuiCGbEw=idhwqhzQ@mail.gmail.com
Backpatch: 11- (all supported versions).
exec_parse_message() wants to create a cached plan in all cases,
including for empty input. The empty-input path does not have
a test for being in an aborted transaction, making it possible
that plancache.c will fail due to trying to do database lookups
even though there's no real work to do.
One solution would be to throw an aborted-transaction error in
this path too, but it's not entirely clear whether the lack of
such an error was intentional or whether some clients might be
relying on non-error behavior. Instead, let's hack plancache.c
so that it treats empty statements with the same logic it
already had for transaction control commands, ensuring that it
can soldier through even in an already-aborted transaction.
Per bug #17983 from Alexander Lakhin. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/17983-da4569fcb878672e@postgresql.org
pgperltidy as well as pgperlcritic and pgperlsyncheck now allow
passing files and directories on the command line, like pgindent does.
(Previously, they would always operate on the whole tree.)
Also, for consistency with pgindent's new behavior (as of b16259b3c1),
passing an argument is now required. To get the previous default
behavior, use "pgperltidy ." for example.
Discussion: https://www.postgresql.org/message-id/flat/45aacd8a-5265-d9da-8df2-b8e2c0cf6a07%40eisentraut.org
This partially reverts 68cb5af, as using archiving to enforce the
rename of the last partial segment of the old timeline at promotion to
use .partial as suffix is impacting the tests when it does switchovers.
As showed by the logs gathered by the CI in the tests that failed, a new
standby may fail to find the WAL segment it needs to follow a promoted
instance with its timeline jump, as it got renamed to .partial.
This problem would manifest as a run timeout with 009_twophase.pl, as
the new standby repeatedly requests a segment from the promoted primary
that it would not find.
Reported-by: Nathan Bossart
Discussion: https://postgr.es/m/20230621043345.GA787473@nathanxps13
Backpatch-through: 13
The existing errhint message and docs were missing the fact that we can't
disassociate from the slot unless the subscription is disabled.
Author: Robert Sjöblom, Peter Smith
Reviewed-by: Peter Eisentraut, Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/807bdf85-61ea-88e2-5712-6d9fcd4eabff@fortnox.se
ff9618e82a introduced the skip_privs parameter, which is used to
skip privilege checks when recursing to a relation's TOAST table.
This parameter should have been added as a flag bit in
VacuumParams->options instead.
Suggested-by: Michael Paquier
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/ZIj4v1CwqlDVJZfB%40paquier.xyz
If the inner-side expressions contain PARAM_EXEC Params, we must
re-hash whenever the values of those Params change. The executor
mechanism for that exists already, but we failed to invoke it because
finalize_plan() neglected to search the Hash.hashkeys field for
Params. This allowed a previous scan's hash table to be re-used
when it should not be, leading to rows missing from the join's output.
(I believe incorrectly-included join rows are impossible however,
since checking the real hashclauses would reject false matches.)
This bug is very ancient, dating probably to d24d75ff1 of 7.4.
Sadly, this simple fix depends on the plan representational changes
made by 2abd7ae9b, so it will only work back to v12. I thought
about trying to make some kind of hack for v11, but I'm leery
of putting code significantly different from what is used in the
newer branches into a nearly-EOL branch. Seeing that the bug
escaped detection for a full twenty years, problematic cases
must be rare; so I don't feel too awful about leaving v11 as-is.
Per bug #17985 from Zuming Jiang. Back-patch to v12.
Discussion: https://postgr.es/m/17985-748b66607acd432e@postgresql.org
I removed the delay_upper_joins mechanism in commit b448f1c8d,
reasoning that it was only needed when we have a single-table
(SELECT ... WHERE) as the immediate RHS child of a left join,
and we could get rid of that by hoisting the WHERE condition into
the parent join's quals. However that new code missed a case:
we could have "foo LEFT JOIN ((SELECT ... WHERE) LEFT JOIN bar)",
and if the two left joins can be commuted then we now have the
problematic query shape. We can fix this too easily enough,
by allowing the syntactically-lower left join to pass through
its parent qual location pointer recursively. That lets
prepjointree.c discard the SELECT by temporarily hoisting the
WHERE condition into the ancestor join's qual.
Per bug #17978 from Zuming Jiang.
Discussion: https://postgr.es/m/17978-12f3d93a55297266@postgresql.org
This avoids an assertion failure when outer joins are rearranged
per identity 3. Listing only the baserels from a PlaceHolderVar's
ph_lateral set should be enough to ensure that the required values
are available when we need to compute the PHV --- it's what we
did before inventing nullingrel sets, after all. It's a bit
unsatisfying; but with beta2 hard upon us, there's not time to
look for an aesthetically cleaner fix.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/CAMbWs48Jcw-NvnxT23WiHP324wG44DvzcH1j4hc0Zn+3sR9cfg@mail.gmail.com
It turns out that the fixes we applied in commits bfd332b3f
and 63e4f13d2 were not nearly enough to solve the problem.
We'd focused narrowly on subquery RTEs with lateral references,
but lateral references can occur in several other RTE kinds
such as function RTEs. Putting the same hack into half a dozen
code paths seems quite unattractive. Hence, revert the code changes
(but not the test cases) from those commits and instead solve it
centrally in identify_current_nestloop_params(), as Richard proposed
originally. This is a bit annoying because it could mask erroneous
nullingrels in nestloop params that are generated from non-LATERAL
parameterized paths; but on balance I don't see a better way.
Maybe at some future time we'll be motivated to find a more rigorous
approach to nestloop params, but that's not happening for beta2.
Richard Guo and Tom Lane
Discussion: https://postgr.es/m/CAMbWs48Jcw-NvnxT23WiHP324wG44DvzcH1j4hc0Zn+3sR9cfg@mail.gmail.com
Run pgindent and pgperltidy. It seems we're still some ways
away from all committers doing this automatically. Now that
we have a buildfarm animal that will whine about poorly-indented
code, we'll try to keep the tree more tidy.
Discussion: https://postgr.es/m/3156045.1687208823@sss.pgh.pa.us
Specify --no-locale and --encoding=UTF8 to be consistent with the
Makefile, which specifies NO_LOCALE=1. Fixes test for some locales
when meson is used and ICU is disabled. May have been an oversight in
e6927270cd.
Also switch argument order in unaccent/meson.build to make it
consistent in style.
Discussion: https://postgr.es/m/CABwTF4Wz41pNMJ9q3tpH=6mnvg6aopDU5Lzvers5=6=WJVekww@mail.gmail.com
Author: Gurjeet Singh
Author: Jeff Davis
This is a follow-up of f663b00, that has been committed to v13 and v14,
tweaking the TAP test for two-phase transactions so as it provides
coverage for the bug that has been fixed. This change is done in its
own commit for clarity, as v15 and HEAD did not show the problematic
behavior, still missed coverage for it.
While on it, this adds a comment about the dependency of the last
partial segment rename and RecoverPreparedTransactions() at the end of
recovery, as that can be easy to miss.
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/743b9b45a2d4013bd90b6a5cba8d6faeb717ee34.camel@cybertec.at
Backpatch-through: 13
Starting with 4d330a61bb we can use posix_fallocate() to extend
files. Unfortunately in some situation, e.g. on tmpfs filesystems, EINTR may
be returned. See also 4518c798b2.
To fix, add a retry path to FileFallocate(). In contrast to 4518c798b2 the
amount we extend by is limited and the extending may happen at a high
frequency, so disabling signals does not appear to be the correct path here.
Also add retry paths to other file operations currently lacking them (around
fdatasync(), fsync(), ftruncate(), posix_fadvise(), sync_file_range(),
truncate()) - they are all documented or have been observed to return EINTR.
Even though most of these functions used in the back branches, it does not
seem worth the risk to backpatch - outside of the new-to-16 case of
posix_fallocate() I am not aware of problem reports due to the lack of
retries.
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/ZEZDj1H61ryrmY9o@msg.df7cb.de
Backpatch: -
Instead of specifying LC_COLLATE='C' and LC_CTYPE='C', specify
LOCALE='C' which will also affect ICU. This makes pg_regress
consistent with recent changes to initdb in commit a14e75eb0b.
Fixes buildfarm failure.
Discussion: https://postgr.es/m/2458565.1686953169@sss.pgh.pa.us
Here we adjust relation_has_unique_index_for() so that it no longer makes
use of partial unique indexes as uniqueness proofs. It is incorrect to
use these as the predicates used by check_index_predicates() to set
predOK makes use of not only baserestrictinfo quals as proofs, but also
qual from join conditions. For relation_has_unique_index_for()'s case, we
need to know the relation is unique for a given set of columns before any
joins are evaluated, so if predOK was only set to true due to some join
qual, then it's unsafe to use such indexes in
relation_has_unique_index_for(). The final plan may not even make use
of that index, which could result in reading tuples that are not as
unique as the planner previously expected them to be.
Bug: #17975
Reported-by: Tor Erik Linnerud
Backpatch-through: 11, all supported versions
Discussion: https://postgr.es/m/17975-98a90c156f25c952%40postgresql.org
For CREATE DATABASE, make LOCALE parameter apply regardless of the
provider used. Also affects initdb and createdb --locale arguments.
Previously, LOCALE (and --locale) only affected the database default
collation when using the libc provider.
Discussion: https://postgr.es/m/1a63084d-221e-4075-619e-6b3e590f673e@enterprisedb.com
Reviewed-by: Peter Eisentraut
Since commit b448f1c8d, we've been able to remove left joins
(that are otherwise removable) even when they are underneath
other left joins, a case that was previously prevented by a
delay_upper_joins check. This is a clear improvement, but
it has a surprising side-effect: it's now possible that there
are EquivalenceClasses whose relid sets mention the removed
baserel and/or outer join. If we fail to clean those up,
we may drop essential join quals due to not having any join
level that appears to satisfy their relid sets.
(It's not quite 100% clear that this was impossible before.
But the lack of complaints since we added join removal a dozen
years ago strongly suggests that it was impossible.)
Richard Guo and Tom Lane, per bug #17976 from Zuming Jiang
Discussion: https://postgr.es/m/17976-4b638b525e9a983b@postgresql.org
This applies the new error message API from commit 0873b2d354 to the
changes introduced by bbf9c282ce. The latter was committed shortly
after the former, so it probably didn't get the news in time.
Between v15 and now, this function's "else if" chain grew from 252 lines
to 592 lines, exceeding a compiler limit that manifests as "fatal error
C1026: parser stack overflow, program too complex (compiling source file
src/backend/nodes/readfuncs.c)". Use "if (...) return ...;" instead.
Reviewed by Tom Lane, Peter Eisentraut and Michael Paquier. Not all
reviewers endorse this.
Discussion: https://postgr.es/m/20230607185458.GA1334487@rfd.leadboat.com
47bb9db75 modified the ApplyRetrieveRule()'s conversion of a view's
original RTE_RELATION entry into an RTE_SUBQUERY one to retain relid,
rellockmode, and perminfoindex so that the executor can lock the view
and check its permissions. It seems better to also retain
relkind for cross-checking that the exception of an
RTE_SUBQUERY entry being allowed to carry relation details only
applies to views, so do so.
Bump catversion because this changes the output format of
RTE_SUBQUERY RTEs.
Suggested-by: David Steele <david@pgmasters.net>
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3953179e-9540-e5d1-a743-4bef368785b0%40pgmasters.net
The issue fixed in commit bfd332b3f can also bite Memoize plans,
because of the separate copies of lateral reference Vars made
by paraminfo_get_equal_hashops. Apply the same hacky fix there.
(In passing, clean up shaky grammar in the existing comments
for this function.)
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-krwk0Wbd6WdufMAupuou_Ua73ijQ4XQCr1Mb5BaVtKQ@mail.gmail.com
rewriteRuleAction neglected to check for SubLink nodes in the
securityQuals of range table entries. This could lead to failing
to convert such a SubLink to a SubPlan, resulting in assertion
crashes or weird errors later in planning.
In passing, fix some poor coding in rewriteTargetView:
we should not pass the source parsetree's hasSubLinks
field to ReplaceVarsFromTargetList's outer_hasSubLinks.
ReplaceVarsFromTargetList knows enough to ignore that
when a Query node is passed, but it's still confusing
and bad precedent: if we did try to update that flag
we'd be updating a stale copy of the parsetree.
Per bug #17972 from Alexander Lakhin. This has been broken since
we added RangeTblEntry.securityQuals (although the presented test
case only fails back to 215b43cdc), so back-patch all the way.
Discussion: https://postgr.es/m/17972-f422c094237847d0@postgresql.org
Previously stats in the startup process would only get reported during
shutdown of the startup process. It has been that way for a long time, but
became a lot more noticeable with the new pg_stat_io view, which separates out
IO done by different backend types...
While replaying after every XLOG_RUNNING_XACTS isn't the prettiest approach,
it has the advantage of being quite easy. Given that we're well past feature
freeze...
It's not a problem that we don't report stats more frequently with
wal_level=minimal, in that case stats can't be read before the stats process
has shut down.
Besides the above, this commit also changes pgstat_report_stat() to acquire
the timestamp with GetCurrentTimestamp() instead of
GetCurrentTransactionStopTimestamp().
Thanks to Melih Mutlu, Kyotaro Horiguchi for prototypes of other approaches to
solving this issue.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/5315aedc-fbca-1556-c5de-dc2e00b23a14@oss.nttdata.com
Commit 927d9abb6 purported to make datetime() accept any string
that could be output for a datetime value by to_jsonb(). But it
overlooked the possibility of fractional seconds being present,
so that cases as simple as to_jsonb(now()) would defeat it.
Fix by adding formats that include ".US" to the list in
executeDateTimeMethod(). (Note that while this is nominally
microseconds, it'll do the right thing for fractions with
fewer than six digits.)
In passing, re-order the list to restore the datatype ordering
specified in its comment. The violation accidentally did not
break anything; but the next edit might be less lucky, so add
more comments.
Per report from Tim Field. Back-patch to v13 where datetime()
was added, like the previous patch.
Discussion: https://postgr.es/m/014A028B-5CE6-4FDF-AC24-426CA6FC9CEE@mohiohio.com
We had left it icon-free since users won't achieve much by opening it
from Windows Explorer. Subsequent to that decision, Task Manager
started to show the icon. That shifts the balance in favor of attaching
the icon, so do so. No back-patch, but make this late addition to v16.
Reviewed by Andres Freund and Magnus Hagander.
Discussion: https://postgr.es/m/20230608014507.GD1334487@rfd.leadboat.com
If we apply outer join identity 3 when relation C is a subquery
having lateral references to relation B, then the lateral references
within C continue to bear the original syntactically-correct
varnullingrels marks, but that won't match what is available from
the outer side of the nestloop. Compensate for that in
process_subquery_nestloop_params(). This is a slightly hacky fix,
but we certainly don't want to re-plan C in toto for each possible
outer join order, so there's not a lot of better alternatives.
Richard Guo and Tom Lane, per report from Markus Winand
Discussion: https://postgr.es/m/DFBB2D25-DE97-49CA-A60E-07C881EA59A7@winand.at
- Commit 3eb77eba5a, which moved the pending ops queue from md.c to
sync.c, introduced a duplicate, unused 'pendingOpsCxt'
variable. (I'm surprised none of the compilers or static analysis
tools have complained about that.)
- Commit c2fe139c20 moved the 'synchronize_seqscans' variable and
introduced an extern declaration in tableam.h, making the one in
guc_tables.c unnecessary.
- Commit 6f0cf87872 removed the 'pgstat_temp_directory' GUC, but
forgot to remove the corresponding global variable.
- Commit 1b4e729eaa removed the 'pg_krb_realm' GUC, and its global
variable, but forgot the declaration in auth.h.
Spotted all these by reading the code.
As reported by buildfarm member conchuela, one of the regression tests
added by 558c9d7 is having some ordering issues. This commit adds an
ORDER BY clause to make the output more stable for the problematic
query.
Fix suggested by Tom Lane. The plan of the query updated still uses a
parallel hash full join.
Author: Melanie Plageman
Discussion: https://postgr.es/m/623596.1684541098@sss.pgh.pa.us
Split nbtree's _bt_getbuf function is two: code that read locks or write
locks existing pages remains in _bt_getbuf, while code that deals with
allocating new pages is moved to a new, dedicated function called
_bt_allocbuf. This simplifies most _bt_getbuf callers, since it is no
longer necessary for them to pass a heaprel argument. Many of the
changes to nbtree from commit 61b313e4 can be reverted. This minimizes
the divergence between HEAD/PostgreSQL 16 and earlier release branches.
_bt_allocbuf replaces the previous nbtree idiom of passing P_NEW to
_bt_getbuf. There are only 3 affected call sites, all of which continue
to pass a heaprel for recovery conflict purposes. Note that nbtree's
use of P_NEW was superficial; nbtree never actually relied on the P_NEW
code paths in bufmgr.c, so this change is strictly mechanical.
GiST already took the same approach; it has a dedicated function for
allocating new pages called gistNewBuffer(). That factor allowed commit
61b313e4 to make much more targeted changes to GiST.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wz=8Z9qY58bjm_7TAHgtW6RzZ5Ke62q5emdCEy9BAzwhmg@mail.gmail.com
Eventually it is likely worth trying to deal with this in a more expansive
way, by generating dependency files generated within the scripts. But it's not
entirely obvious how to do that in perl and is work more suitable for 17
anyway.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/87v8g7s6bf.fsf@wibble.ilmari.org
While executing maintenance operations (ANALYZE, CLUSTER, REFRESH
MATERIALIZED VIEW, REINDEX, or VACUUM), set search_path to
'pg_catalog, pg_temp' to prevent inconsistent behavior.
Functions that are used for functional indexes, in index expressions,
or in materialized views and depend on a different search path must be
declared with CREATE FUNCTION ... SET search_path='...'.
This change addresses a security risk introduced in commit 60684dd834,
where a role with MAINTAIN privileges on a table may be able to
escalate privileges to the table owner. That commit is not yet part of
any release, so no need to backpatch.
Discussion: https://postgr.es/m/e44327179e5c9015c8dda67351c04da552066017.camel%40j-davis.com
Reviewed-by: Greg Stark
Reviewed-by: Nathan Bossart
The same routine to check if a specific pattern can be found in the
server logs was copied over four different test scripts. This refactors
the whole to use a single routine located in PostgreSQL::Test::Cluster,
named log_contains, to grab the contents of the server logs and check
for a specific pattern.
On HEAD, the code previously used assumed that slurp_file() could not
handle an undefined offset, setting it to zero, but slurp_file() does
do an extra fseek() before retrieving the log contents only if an offset
is defined. In two places, the test was retrieving the full log
contents with slurp_file() after calling substr() to apply an offset,
ignoring that slurp_file() would be able to handle that.
Backpatch all the way down to ease the introduction of new tests that
could rely on the new routine.
Author: Vignesh C
Reviewed-by: Andrew Dunstan, Dagfinn Ilmari Mannsåker, Michael Paquier
Discussion: https://postgr.es/m/CALDaNm0YSiLpjCmajwLfidQrFOrLNKPQir7s__PeVvh9U3uoTQ@mail.gmail.com
Backpatch-through: 11
Commit 482675987 introduced "run_as_owner" subscription option so that
subscription runs with either the permissions of the subscription
owner or the permission of the table owner. However, tablesync workers
did not use this option for the initial data copy.
With this change, tablesync workers run with appropriate permissions
based on "run_as_owner" option.
Ajin Cherian, with changes and regression tests added by me.
Reported-By: Amit Kapila
Author: Ajin Cherian, Masahiko Sawada
Reviewed-by: Ajin Cherian, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1L=qzRHPEn+qeMoKQGFBzqGoLBzt_ov0A89iFFiut+ppA@mail.gmail.com
This commit refactors a bit the code in charge of checking for log
patterns when connections fail or succeed, by moving the log pattern
checks into their own routine, for clarity. This has come up as
something to improve while discussing the refactoring of find_in_log().
Backpatch down to 14 where these routines are used, to ease the
introduction of new tests that could rely on them.
Author: Vignesh C, Michael Paquier
Discussion: https://postgr.es/m/CALDaNm0YSiLpjCmajwLfidQrFOrLNKPQir7s__PeVvh9U3uoTQ@mail.gmail.com
Backpatch-through: 14
A placeholder that references the outer join's relid in ph_eval_at
is logically "above" the join, and therefore we can't remove its
PlaceHolderInfo: it might still be used somewhere in the query.
This was not an issue pre-v16 because we failed to remove the join
at all in such cases. The new outer-join-aware-Var infrastructure
permits deducing that it's okay to remove the join, but then we
have to clean up correctly afterwards.
Report and fix by Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_tuVn9EwwMcggGiZJWWstdXX_ci8FeEU17vs+4nLgw3w@mail.gmail.com
Apparently some extensions are in the habit of calling
ChangeVarNodes() with INDEX_VAR as the rt_index to replace.
That worked before 2489d76c4, at least as long as there were
not PlaceHolderVars in the expression; but now it fails
because bms_is_member spits up. Add a test to avoid that.
Per report from Anton Melnikov, though this is not his
proposed patch.
Discussion: https://postgr.es/m/5b370a46-f6d2-373d-9dbc-0d55250e82c1@inbox.ru
pg_base64_enc_len() and its clones overestimated the output
length by up to 2 bytes, as a result of sloppy thinking about
where to divide. No callers require a precise estimate, so
this has no consequences worse than palloc'ing a byte or two
more than necessary. We might as well get it right though.
This bug is very ancient, dating to commit 79d78bb26 which
added encode.c. (The other instances were presumably copied
from there.) Still, it doesn't quite seem worth back-patching.
Oleg Tselebrovskiy
Discussion: https://postgr.es/m/f94da55286a63022150bc266afdab754@postgrespro.ru
677319746 added support for making use of MSVC's bit scanning functions.
However, that commit failed to consider 32-bit MSVC builds where the
64-bit versions of these functions are unavailable. This resulted in
compilation failures on 32-bit MSVC.
Here we adjust the code so we fall back on the manual way of finding the
bit positions for 64-bit integers when building on 32-bit MSVC.
Bug: #17967
Reported-by: Youmiu Mo
Discussion: https://postgr.es/m/17967-cd21e34a314141b2@postgresql.org
Commit fc22b6623b (generated columns) replaced ExecGetUpdatedCols() with
ExecGetAllUpdatedCols() in a couple places handling UPDATE (triggers and
lock mode). However, ExecGetUpdatedCols() did exec_rt_fetch() while
ExecGetAllUpdatedCols() also allocates memory through bms_union()
without paying attention to the memory context and happened to use the
long-lived ExecutorState, leaking the memory until the end of the query.
The amount of leaked memory is proportional to the number of (updated)
attributes, types of UPDATE triggers, and the number of processed rows
(which for UPDATE ... FROM ... may be much higher than updated rows).
Fixed by switching to the per-tuple context in GetAllUpdatedColumns().
This is fine for all in-core callers, but external callers may need to
copy the result. But we're not aware of any such callers.
Note the issue was introduced by fc22b6623b, but the macros were later
renamed by f50e888990.
Backpatch to 12, where the issue was introduced.
Reported-by: Tomas Vondra
Reviewed-by: Andres Freund, Tom Lane, Jakub Wartak
Backpatch-through: 12
Discussion: https://postgr.es/m/222a3442-7f7d-246c-ed9b-a76209d19239@enterprisedb.com
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
The apply worker was not reloading the configuration while processing
messages if there is a continuous flow of messages from upstream. It was
also not reloading the configuration if there is a change in the
configuration after it has waited for the message and before receiving the
new replication message. This can lead to failure in tests because we
expect that after reload, the behavior of apply worker to respect the
changed GUCs.
We found this while analyzing a rare buildfarm failure.
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB5716AF9079CC0755CD015322947E9@OS0PR01MB5716.jpnprd01.prod.outlook.com
A new-style SQL function can contain a parse-time dependency
on a unique index, much as views and matviews can (such cases
arise from GROUP BY and ON CONFLICT clauses, for example).
To dump and restore such a function successfully, pg_dump must
postpone the function until after the unique index is created,
which will happen in the post-data part of the dump. Therefore
we have to remove the normal constraint that functions are
dumped in pre-data. Add code similar to the existing logic
that handles this for matviews. I added test cases for both
as well, since code coverage tests showed that we weren't
testing the matview logic.
Per report from Sami Imseih. Back-patch to v14 where
new-style SQL functions came in.
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
Two places in pg_dump_sort.c were using pg_log_info() to add
more details to a message printed with pg_log_warning().
This is bad, because at default verbosity level we would
print the warning line but not the details. One should use
pg_log_warning_detail() or pg_log_warning_hint() instead.
Commit 9a374b77f got rid of most such abuses, but unaccountably
missed these.
Noted while studying a bug report from Sami Imseih.
Back-patch to v15 where 9a374b77f came in. (Prior versions
don't have the missing-details misbehavior, for reasons
I didn't bother to track down.)
Discussion: https://postgr.es/m/2C1933AB-C2F8-499B-9D18-4AC1882256A0@amazon.com
When we're deleting a no-op LEFT JOIN from the query, we must remove
the join's joinclauses from surviving relations' joininfo lists.
The invention of "cloned" clauses in 2489d76c4 broke the logic for
that; it'd fail to remove clones that include OJ relids outside the
doomed join's min relid sets, which could happen if that join was
previously discovered to commute with some other join.
This accidentally failed to cause problems in the majority of cases,
because we'd never decide that such a cloned clause was evaluatable at
any surviving join. However, Richard Guo discovered a case where that
did happen, leading to "no relation entry for relid" errors later.
Also, adding assertions that a non-removed clause contains no Vars from
the doomed join exposes that there are quite a few existing regression
test cases where the problem happens but is accidentally not exposed.
The fix for this is just to include the target join's commute_above_r
and commute_below_l sets in the relid set we test against when
deciding whether a join clause is "pushed down" and thus not
removable.
While at it, do a little refactoring: the join's relid set can be
computed inside remove_rel_from_query rather than in the caller.
Patch by me; thanks to Richard Guo for review.
Discussion: https://postgr.es/m/CAMbWs4_PHrRqTKDNnTRsxxQy6BtYCVKsgXm1_gdN2yQ=kmcO5g@mail.gmail.com
Avoid "right sibling's left-link doesn't match" errors when vacuuming a
corrupt nbtree index. Just LOG the issue and press on. That way VACUUM
will have a decent chance of finishing off all required processing for
the index (and for the table as a whole).
This error was seen in the field from time to time (it's more than a
theoretical risk), so giving VACUUM the ability to press on like this
has real value. Nothing short of a REINDEX is expected to fix the
underlying index corruption, so giving up (by throwing an error) risks
making a bad situation far worse. Anything that blocks forward progress
by VACUUM like this might go unnoticed for a long time. This could
eventually lead to a wraparound/xidStopLimit outage.
Note that _bt_unlink_halfdead_page() has always been able to bail on
page deletion when the target page's left sibling page was in an
inconsistent state. It now does the same thing (returns false to back
out of the second phase of deletion) when it notices sibling link
corruption in the target page's right sibling page.
This is similar to the work from commit 5b861baa (later backpatched as
commit 43e409ce), which taught nbtree to press on with vacuuming an
index when page deletion fails to "re-find" a downlink in the target
page's parent page. The "re-find" check seems to make VACUUM bail on
page deletion more often in practice, but there is no reason to take any
chances here.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAH2-Wzko2q2kP1+UvgJyP9g0mF4hopK0NtQZcxwvMv9_ytGhkQ@mail.gmail.com
Backpatch: 11- (all supported versions).
We've had multiple issues with the clause_is_computable_at logic that
I introduced in 2489d76c4: it's been known to accept more than one
clone of the same qual at the same plan node, and also to accept no
clones at all. It's looking impractical to get it 100% right on the
basis of the currently-stored information, so fix it by introducing a
new RestrictInfo field "incompatible_relids" that explicitly shows
which outer joins a given clone mustn't be pushed above.
In principle we could populate this field in every RestrictInfo, but
that would cost space and there doesn't presently seem to be a need
for it in general. Also, while deconstruct_distribute_oj_quals can
easily fill the field with the remaining members of the commutative
join set that it's considering, computing it in the general case
seems again pretty complicated. So for now, just fill it for
clone quals.
Along the way, fix a bug that may or may not be only latent:
equivclass.c was generating replacement clauses with is_pushed_down
and has_clone/is_clone markings that didn't match their
required_relids. This led me to conclude that leaving the clone flags
out of make_restrictinfo's purview wasn't such a great idea after all,
so add them.
Per report from Richard Guo.
Discussion: https://postgr.es/m/CAMbWs48EYi_9-pSd0ORes1kTmTeAjT4Q3gu49hJtYCbSn2JyeA@mail.gmail.com
2dcd1578c4 left the --role option undocumented, which is
inconsistent with other deprecated options such as pg_dump's
--blobs and --no-blobs. This change adds --role back to
createuser's documentation and usage output and marks it as
deprecated.
Suggested-by: Peter Eisentraut
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0e85c9e7-4804-1cdb-5a4a-c72c328f9ad8%40enterprisedb.com
Commit f62975b2a made headerscheck and cpluspluscheck a little
smarter than this documentation gave them credit for. Make
their docs match current reality. Also add a warning about the
layer of dust that has settled on the rest of these scripts.
Discussion: https://postgr.es/m/769950.1684797558@sss.pgh.pa.us
This file could be in the current (build) directory if we just
built it. However, when installing from a VPATH build from a
tarball, it will exist in the source directory and gmake will
therefore not rebuild it. Use the $< macro to find out where
gmake found it.
Oversight in b3a0d8324, which also exposes a buildfarm testing gap:
we test install from VPATH builds from bare source trees, but not
from tarballs.
Per report from Christoph Berg.
Discussion: https://postgr.es/m/ZGzEAqjxkkoY3ooH@msg.df7cb.de
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
This change renames --admin to --with-admin, --role to --member-of,
and --member to --with-member. Many people found the previous
names to be confusing. The --admin and --member options are new in
v16, but --role has been there for a while, so that one has been
kept (but left undocumented) for backward compatibility.
Suggested-by: Peter Eisentraut
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/ZFvVZvQDliIWmOwg%40momjian.us
Use the clause's required_relids not clause_relids for testing
whether it is computable at the current join level, if it is a
clone clause generated by deconstruct_distribute_oj_quals().
Arguably, this is more correct and we should do it for all clauses;
that would at least remove the handwavy claim that we are doing
it to save cycles compared to inspecting Vars individually.
However, attempting to do that exposes that we are not being careful
to compute an accurate value for required_relids in all cases.
I'm unsure whether it's a good idea to attempt to do that for v16,
or leave it as future clean-up. In the meantime, this quick hack
demonstrably fixes some cases, so let's squeeze it in for beta1.
Patch by me, but great thanks to Richard Guo for investigation
and testing. The new test cases are all modeled on his examples.
Discussion: https://postgr.es/m/CAMbWs4-_vwkBij4XOQ5ukxUvLgwTm0kS5_DO9CicUeKbEfKjUw@mail.gmail.com
The assertion checked that the size of the relation is not "too large" - but
the code is explicitly dealing with the possibility of another backend
extending the relation concurrently. In that case the new relation size could
be bigger than what the current backend needs, wrongly triggering an assertion
failure.
Unfortunately it is hard to write a reliable and affordable regression tests
for this, as a lot of concurrency is needed to encounter the bug.
Introduced in 31966b151e.
Reported-by: Melanie Plageman <melanieplageman@gmail.com>
WalSndWakeup() currently loops through all the walsenders slots, with a
spinlock acquisition and release for every iteration, to wake up waiting
walsenders.
This commonly was not a problem before e101dfac3a. But, to allow logical
decoding on standbys, we need to wake up logical walsenders after every WAL
record is applied on the standby, rather just when flushing WAL or switching
timelines. This causes a performance regression for workloads replaying a lot
of WAL records.
To solve this, we use condition variable (CV) to efficiently wake up
walsenders in WalSndWakeup().
Every walsender prepares to sleep on a shared memory CV. Note that it just
prepares to sleep on the CV (i.e., adds itself to the CV's waitlist), but does
not actually wait on the CV (IOW, it never calls ConditionVariableSleep()). It
still uses WaitEventSetWait() for waiting, because CV infrastructure doesn't
handle FeBe socket events currently. The processes (startup process,
walreceiver etc.) wanting to wake up walsenders use
ConditionVariableBroadcast(), which in turn calls SetLatch(), helping
walsenders come out of WaitEventSetWait().
We use separate shared memory CVs for physical and logical walsenders for
selective wake ups, see WalSndWakeup() for more details.
This approach is simple and reasonably efficient. But not very elegant. But
for 16 it seems to be a better path than a larger redesign of the CV
mechanism. A desirable future improvement would be to add support for CVs
into WaitEventSetWait().
This still leaves us with a small regression in very extreme workloads (due to
the spinlock acquisition in ConditionVariableBroadcast() when there are no
waiters) - but that seems acceptable.
Reported-by: Andres Freund <andres@anarazel.de>
Suggested-by: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Discussion: https://www.postgresql.org/message-id/20230509190247.3rrplhdgem6su6cg%40awork3.anarazel.de
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid 8000 --target-oid 6200
In commit 9df8f903e I (tgl) switched join_is_removable() from
using the min relid sets of the join under consideration to
using its full syntactic relid sets. This was a mistake,
as it allowed join removal in cases where a reference to the
join output would survive in some syntactically-lower join
condition. Revert to the former coding.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-EU9uBGSP7G-iTwLBhRQ=rnZKvFDhD+n+xhajokyPCKg@mail.gmail.com
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
Should a hash join exceed memory limit, the hashtable is split up into
multiple batches. The number of batches is doubled each time a given
batch is determined not to fit in memory. Each batch file is allocated
with a block-sized buffer for buffering tuples and parallel hash join
has additional sharedtuplestore accessor buffers.
In some pathological cases requiring a lot of batches, often with skewed
data, bad stats, or very large datasets, users can run out-of-memory
solely from the memory overhead of all the batch files' buffers.
Batch files were allocated in the ExecutorState memory context, making
it very hard to identify when this batch explosion was the source of an
OOM. This commit allocates the batch files in a dedicated memory
context, making it easier to identify the cause of an OOM and work to
avoid it.
Based on initial draft by Tomas Vondra, with significant reworks and
improvements by Jehan-Guillaume de Rorthais.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Author: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20190421114618.z3mpgmimc3rmubi4@development
Discussion: https://postgr.es/m/20230504193006.1b5b9622%40karst#273020ff4061fc7a2fbb1ba96b281f17
Add a high level description of our implementation of the hybrid hash
join algorithm to the block comment in nodeHashjoin.c.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20230516160051.4267a800%40karst
Commits 681d9e462 et al added a test case in namespace.sql that
implicitly relied on there not being a table "public.abc".
However, the concurrently-run transactions.sql test creates precisely
such a table, so with the right timing you'd get a failure.
Creating a table named as generically as "abc" in a common schema
seems like bad practice, so fix this by changing the name of
transactions.sql's table. (Compare 2cf8c7aa4.)
Marina Polyakova
Discussion: https://postgr.es/m/80d0201636665d82185942e7112257b4@postgrespro.ru
Most (older) comments in md.c and smgr.c are indented with a leading
tab on all lines, which isn't the current style and makes updating the
comments a bit annoying. This reindents all these lines with a single
space, as is the normal style. This issue exists in various shapes
throughout the code but it's pretty consistent here, and since there
is a patch pending to refresh some of the comments in these files, it
seems sensible to clean this up here separately.
Discussion: https://www.postgresql.org/message-id/flat/22fed8ba-01c3-2008-a256-4ea912d68fab%40enterprisedb.com
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
Commit 3581cbdcd6 added a flag to identify empty BRIN ranges. This adds
the new flag to brin_page_items() output.
This is kept as a separate commit as it should not be backpatched.
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
BRIN indexes did not properly distinguish between summaries for empty
(no rows) and all-NULL ranges, treating them as essentially the same
thing. Summaries were initialized with allnulls=true, and opclasses
simply reset allnulls to false when processing the first non-NULL value.
This however produces incorrect results if the range starts with a NULL
value (or a sequence of NULL values), in which case we forget the range
contains NULL values when adding the first non-NULL value.
This happens because the allnulls flag is used for two separate
purposes - to mark empty ranges (not representing any rows yet) and
ranges containing only NULL values.
Opclasses don't know which of these cases it is, and so don't know
whether to set hasnulls=true. Setting the flag in both cases would make
it correct, but it would also make BRIN indexes useless for queries with
IS NULL clauses. All ranges start empty (and thus allnulls=true), so all
ranges would end up with either allnulls=true or hasnulls=true.
The severity of the issue is somewhat reduced by the fact that it only
happens when adding values to an existing summary with allnulls=true.
This can happen e.g. for small tables (because a summary for the first
range exists for all BRIN indexes), or for tables with large fraction of
NULL values in the indexed columns.
Bulk summarization (e.g. during CREATE INDEX or automatic summarization)
that processes all values at once is not affected by this issue. In this
case the flags were updated in a slightly different way, not forgetting
the NULL values.
To identify empty ranges we use a new flag, stored in an unused bit in
the BRIN tuple header so the on-disk format remains the same. A matching
flag is added to BrinMemTuple, into a 3B gap after bt_placeholder.
That means there's no risk of ABI breakage, although we don't actually
pass the BrinMemTuple to any public API.
We could also skip storing index tuples for empty summaries, but then
we'd have to always process such ranges - even if there are no rows in
large parts of the table (e.g. after a bulk DELETE), it would still
require reading the pages etc. So we store them, but ignore them when
building the bitmap.
Backpatch to 11. The issue exists since BRIN indexes were introduced in
9.5, but older releases are already EOL.
Backpatch-through: 11
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
When merging BRIN summaries, union_tuples() did not correctly update the
target hasnulls/allnulls flags. When merging all-NULL summary into a
summary without any NULL values, the result had both flags set to false
(instead of having hasnulls=true).
This happened because the code only considered the hasnulls flags,
ignoring the possibility the source summary has allnulls=true.
Discovered while investigating issues with handling empty BRIN ranges
and handling of NULL values, but it's a separate problem (has nothing to
do with empty ranges).
Fixed by considering both flags on the source summary, and updating the
hasnulls flag on the target summary.
Backpatch to 11. The bug exists since 9.5 (where BRIN indexes were
introduced), but those releases are EOL already.
Discussion: https://postgr.es/m/9d993d0d-e431-2196-9ccc-0554d0e60154%40enterprisedb.com
Pass it the RestrictInfo under consideration, not just the
clause_relids. This should save some trivial amount of
code at the call sites, and it gives us more flexibility
about what clause_is_computable_at() does. There's no
actual functional change here, though.
Discussion: https://postgr.es/m/3564467.1684352557@sss.pgh.pa.us
Fixes memory error in cases where the length of the language name
returned by uloc_getLanguage() is exactly ULOC_LANG_CAPACITY, in which
case the status is set to U_STRING_NOT_TERMINATED_WARNING.
Also check in call sites for other ICU functions that are expected to
return a C string to be safe (no bug is known at these other call
sites).
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/2098874d-c111-41e4-9063-30bcf135226b@gmail.com
The original patch for percentrepl.c c96de2ce17 adopted the error
messages from basebackup_to_shell, but that uses terminology that
doesn't really fit with the new API naming.
28e626bde0 added the concept of IOOps but neglected to include writeback
operations. ac8d53dae5 added time spent doing these I/O operations. Without
counting writeback, checkpointer write time in the log often differed
substantially from that in pg_stat_io. To fix this, add IOOp IOOP_WRITEBACK
and track writeback in pg_stat_io.
Bumps catversion.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230419172326.dhgyo4wrrhulovt6%40awork3.anarazel.de
For clarity of review, renaming the function parameter "context" in
ScheduleBufferTagForWriteback() and IssuePendingWritebacks() to
"wb_context" is a separate commit. The next commit adds an "io_context"
parameter and "wb_context" makes it more clear which is which.
Author: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_acc6iL4M3hvOTeztf_ZPpsB3Pqio5aVHgZ5q=Pi3BZKg@mail.gmail.com
After applying outer-join identity 3 in the forward direction,
it was possible for the planner to mistakenly apply a qual clause
from above the two outer joins at the now-lower join level.
This can give the wrong answer, since a value that would get nulled
by the now-upper join might not yet be null.
To fix, when we perform such a transformation, consider that the
now-lower join hasn't really completed the outer join it's nominally
responsible for and thus its relid set should not include that OJ's
relid (nor should its output Vars have that nullingrel bit set).
Instead we add those bits when the now-upper join is performed.
The existing rules for qual placement then suffice to prevent
higher qual clauses from dropping below the now-upper join.
There are a few complications from needing to consider transitive
closures in case multiple pushdowns have happened, but all in all
it's not a very complex patch.
This is all new logic (from 2489d76c4) so no need to back-patch.
The added test cases all have the same results as in v15.
Tom Lane and Richard Guo
Discussion: https://postgr.es/m/0b819232-4b50-f245-1c7d-c8c61bf41827@postgrespro.ru
It seems like the code that these checks are backstopping may have
a few bugs left in it. Use a test-and-elog so that the tests are
performed even in non-assert builds, and so that we get something
more informative than "server closed the connection" on failure.
Committed separately with the idea that eventually we'll revert
this. It might be awhile though.
Discussion: https://postgr.es/m/3014965.1684293045@sss.pgh.pa.us
LZ4File_write() did not advance the input pointer on subsequent invocations of
LZ4F_compressUpdate(). As a result the generated compressed output would be a
compressed version of the same input chunk.
Tests failed to catch this error because the data would comfortably fit
within the default buffer size, as a single chunk. Tests have been added
to provide adequate coverage of multi-chunk compression.
WriteDataToArchiveLZ4() which is also using LZ4F_compressUpdate() did
not suffer from this omission.
Author: Georgios Kokolatos <gkokolatos@pm.me>
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/ZFhCyn4Gm2eu60rB%40paquier.xyz
LZ4Stream_gets did not null-terminate its output buffer. The callers expected
the buffer to be null-terminated and passed it around to functions such as
sscanf with unintended consequences.
Author: Georgios Kokolatos <gkokolatos@pm.me>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/94ae9bca-5ebb-1e68-bb7b-4f32e89fefbe@gmail.com
This is equivalent to a revert of f193883 and fb32748, with the addition
that the declaration of the SQLValueFunction node needs to gain a couple
of node_attr for query jumbling. The performance impact of removing the
function call inlining is proving to be too huge for some workloads
where these are used. A worst-case test case of involving only simple
SELECT queries with a SQL keyword is proving to lead to a reduction of
10% in TPS via pgbench and prepared queries on a high-end machine.
None of the tests I ran back for this set of changes saw such a huge
gap, but Alexander Lakhin and Andres Freund have found that this can be
noticeable. Keeping the older performance would mean to do more
inlining in the executor when using COERCE_SQL_SYNTAX for a function
expression, similarly to what SQLValueFunction does. This requires more
redesign work and there is little time until 16beta1 is released, so for
now reverting the change is the best way forward, bringing back the
previous performance.
Bump catalog version.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/b32bed1b-0746-9b20-1472-4bdc9ca66d52@gmail.com
The problem that these messages protect against can only occur because
a corrupted hash spill file was written, i.e., a Postgres bug. There's
no reason to have them as translatable.
Backpatch to 15, where these messages were changed by commit c4649cce39.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20230510175407.dwa5v477pw62ikyx@alvherre.pgsql
Commit 558fff0adf got the order of the parameters to test_status_failed
mixed up which resulted in the runtime being reported as 0 ms. Fix by
changing the order to the correct one. No backpatching is needed since
this has not been shipped in a release yet.
Discussion: https://postgr.es/m/0134C9EC-5F6B-4EAC-B2D5-BB4249BEBD4D@yesql.se
Using a test function before a possible skip_all is incorrect. If the
skip_all is called, the test output will become incorrect and the test
file will fail.
a4f23f9b3c introduced a new test before skip_all. After discussion,
this doesn't really need to be a test. Instead, we just bail out if
the condition is not satisfied.
Discussion: https://www.postgresql.org/message-id/af5567a1-aea6-fbdb-7e4b-d1e23a43c43b@enterprisedb.com
Commit a73952b795 (new in 16) required default values in guc_table.c
and C variable initializers to match. This one only matched when
XLOG_BLCKSZ == 8kB. Fix by using the same expression in both places
with a new DEFAULT_XXX macro, as done for other GUCs.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGLNmLV=VrT==5MqnbARgx2ifRSFtdd8ofdfrdSLL3yv5A@mail.gmail.com
Give the new GUC introduced by d4e71df6 a name that is clearly not
intended for mainstream use quite yet.
Future proposals would drop the prefix only after adding infrastructure
to make it efficient. Having the switch in the tree sooner is good
because it might lead to new discoveries about the hazards awaiting us
on a wide range of systems, but that name was too enticing and could
lead to cross-version confusion in future, per complaints from Noah and
Justin.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (the idea, not the patch)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (ditto)
Discussion: https://postgr.es/m/20230430041106.GA2268796%40rfd.leadboat.com
Don't use PSQL_WATCH_PAGER when stdin/stdout are not a terminal.
This corresponds to the restrictions on when other commands will
use [PSQL_]PAGER. There isn't a lot of sense in trying to use a
pager in non-interactive cases, and doing so allows an environment
setting to break our tests.
Also, ignore PSQL_WATCH_PAGER if it is set but empty or all-blank,
for the same reasons we ignore such settings of [PSQL_]PAGER (see
commit 18f8f784c).
No documentation change is really needed, since there is nothing
suggesting that these constraints on [PSQL_]PAGER didn't already
apply to PSQL_WATCH_PAGER too. But I rearranged the text
a little to make it read more naturally (IMHO anyway).
Per report from Pavel Stehule. Back-patch to v15 where
PSQL_WATCH_PAGER was introduced.
Discussion: https://postgr.es/m/CAFj8pRDTwFzmEWdA-gdAcUh0ZnxUioSfTMre71WyB_wNJy-8gw@mail.gmail.com
Since the behavior of the UNICODE collation can change with new
ICU/Unicode versions, we need to apply the versioning mechanism to it.
We do this with an UPDATE command in initdb; this is similar to how we
put the collation version into pg_database already.
Reported-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/49417853-7bdd-4b23-a4e9-04c7aff33821@manitou-mail.org
I've had a bee in my bonnet for some time about getting rid of
RestrictInfo.is_pushed_down, because it's squishily defined and
requires not-inexpensive extra tests to use (cf RINFO_IS_PUSHED_DOWN).
In commit 2489d76c4, I tried to make remove_rel_from_query() not
depend on that macro; but the replacement test is buggy,
as exposed by a report from Rushabh Lathia and Robert Haas.
That change was pretty incidental to the main goal of 2489d76c4,
so let's just revert it for now. (Getting rid of is_pushed_down
is still far away, anyway.)
Discussion: https://postgr.es/m/CA+TgmoYco=hmg+iX1CW9Y1_CzNoSL81J03wUG-d2_3=rue+L2A@mail.gmail.com
There was some odd wording in corner-case gram.y error messages "some
error ... at or near", which appears to have been modeled after "syntax
error" messages. However, they don't work that way, and they're just
wrong. They're also uncovered by tests. Remove the trailing words,
and also add tests.
They were introduced with 5a2832465fd8; backpatch to 15.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
An update of the GUC stats_fetch_consistency in a transaction would be
able to trigger an assertion when doing cache->snapshot. In this case,
when retrieving a pgstat entry after the switch, a new snapshot would be
rebuilt, confusing pgstat_build_snapshot() because a snapshot is already
cached with an unexpected mode ("cache").
In order to fix this problem, this commit adds a flag to force a
snapshot clear each time this GUC is changed. Some tests are added to
check, while on it.
Some optimizations in avoiding the snapshot clear should be possible
depending on what is cached and the current GUC value, I guess, but this
solution is simple, and ensures that the state of the cache is updated
each time a new pgstat entry is fetched, hence being consistent with the
level wanted by the client that has set the GUC.
Note that cache->none and snapshot->none would not cause issues, as
fetching a pgstat entry would be retrieved from shared memory on the
second attempt, however a snapshot would still be cached. Similarly,
none->snapshot and none->cache would build a new snapshot on the second
fetch attempt. Finally, snapshot->cache would cache a new snapshot on
the second attempt.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17804-2a118cd046f2d0e5@postgresql.org
backpatch-through: 15
The commit a6e04b1d20 added a test to ensure that the invalidated logical
slots don't retain WAL. The test was ensuring that the checkpoint removes
the WAL files corresponding to invalidated logical slots on the standby
node but missed the point that the standby node also had a physical slot
which led to the prevention of WAL file removal. Move the creation of
physical slot on the standby and initialization of cascading standby closer
to the test case that actually required it so that other tests don't get
affected by the presence of the physical slot on standby.
Author: Bertrand Drouvot
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/2fefa454-5a70-2174-ddbf-4a0e41537139@gmail.com
The callback function pa_shutdown() accesses MyLogicalRepWorker which may
not be initialized if there is an error during the initialization of the
parallel apply worker. The other problem is that by the time it is invoked
even after the initialization of the worker, the MyLogicalRepWorker will
be reset by another callback logicalrep_worker_onexit. So, it won't have
the required information.
To fix this, register the shutdown callback after we are attached to the
worker slot.
After this fix, we observed another issue which is that sometimes the
leader apply worker tries to receive the message from the error queue that
might already be detached by the parallel apply worker leading to an
error. To prevent such an error, we ensure that the leader apply worker
detaches from the parallel apply worker's error queue before stopping it.
Reported-by: Sawada Masahiko
Author: Hou Zhijie
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDo+yUwNq6nTrvE2h9bB2vZfcag=jxWc7QxuWCmkDAqcA@mail.gmail.com
If an SRF in the FROM clause references a table having row-level
security policies, and we inline that SRF into the calling query,
we neglected to mark the plan as potentially dependent on which
role is executing it. This could lead to later executions in the
same session returning or hiding rows that should have been hidden
or returned instead.
Our thanks to Wolfgang Walther for reporting this problem.
Stephen Frost and Tom Lane
Security: CVE-2023-2455
The two methods don't cooperate, so set_config_option("search_path",
...) has been ineffective under non-empty overrideStack. This defect
enabled an attacker having database-level CREATE privilege to execute
arbitrary code as the bootstrap superuser. While that particular attack
requires v13+ for the trusted extension attribute, other attacks are
feasible in all supported versions.
Standardize on the combination of NewGUCNestLevel() and
set_config_option("search_path", ...). It is newer than
PushOverrideSearchPath(), more-prevalent, and has no known
disadvantages. The "override" mechanism remains for now, for
compatibility with out-of-tree code. Users should update such code,
which likely suffers from the same sort of vulnerability closed here.
Back-patch to v11 (all supported versions).
Alexander Lakhin. Reported by Alexander Lakhin.
Security: CVE-2023-2454
This wait event was documented as "CommitTsBuffer" since its
introduction, but the code named it "CommitTSBuffer". This commit fixes
the code to follow the term documented, which is also more consistent
with the naming of the other wait events used for commit timestamps.
Introduced by 5da1493.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/e8c38840-596a-83d6-bd8d-cebc51111572@gmail.com
Backpatch-through: 13
Commit 153e215677 added the portlock directory. This is created in
$ENV{top_builddir} if it is set. Under PGXS, top_builddir points into
the installation directory, which is not necessarily writable and in
any case inappropriate to use by a test suite. The cause of the
problem is that the prove_installcheck target in Makefile.global
exports top_builddir, which isn't useful (since no other Perl code
actually reads it) and breaks this use case. The reason this code is
there is probably that is has been dragged around with various other
changes, in particular a0fc813266, but without a real purpose of its
own. By just removing the exporting of top_builddir in
prove_installcheck, the portlock directory then ends up under
tmp_check in the build directory, which is more suitable.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/78d1cfa6-0065-865d-584b-cde6d8c18aff@enterprisedb.com
RI_Initial_Check was setting up a list of RTEPermissionInfo for
ExecCheckPermissions() wrong, and the problem is subtle enough that it
doesn't have any immediate effect in core code. However, if an
extension is using the ExecutorCheckPerms_hook, then it would get the
wrong parameters and perhaps arrive at a wrong conclusion, or outright
malfunction. Fix by constructing that list and the RTE list more
honestly.
We also add an assertion check to verify that these lists match. This
new assertion would have caught this bug.
Co-authored-by: Олег Целебровский (Oleg Tselebrovskii) <o.tselebrovskiy@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/3722b7a2cbe27a1796ee40824bd86dd1@postgrespro.ru
These functions incautiously fetched the array's first lower bound
even when the array is zero-dimensional, thus fetching the word
after the allocated array space. While almost always harmless,
with very bad luck this could result in SIGSEGV. Fix by adding
an early exit for empty input.
Per bug #17920 from Alexander Lakhin.
Discussion: https://postgr.es/m/17920-f7c228c627b6d02e%40postgresql.org
Like plperl before f47004add, plpython wasn't being sufficiently
careful about checking that list-of-list structures represent
rectangular arrays, so that it would accept some cases in which
different parts of the "array" are nested to different depths.
This was exacerbated by Python's weak distinction between
sequences and lists, so that in some cases strings could get
treated as though they are lists (and burst into individual
characters) even though a different ordering of the upper-level
list would give a different result.
Some of this behavior was unreachable (without risking a crash)
before 81eaaf65e. It seems like a good idea to clean it all up
in the same releases, rather than shipping a non-crashing but
nonetheless visibly buggy behavior in the name of minimal change.
Hence, back-patch.
Per bug #17912 and further testing by Alexander Lakhin.
Discussion: https://postgr.es/m/17912-82ceed78731d9cdc@postgresql.org
During exit, the logical replication apply worker tries to release session
level locks, if any. However, if the apply worker exits due to an error
before its connection is initialized, trying to release locks can lead to
assertion failure. The locks will be acquired once the worker is
initialized, so we don't need to release them till the worker
initialization is complete.
Reported-by: Alexander Lakhin
Author: Hou Zhijie based on inputs from Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/2185d65f-5aae-3efa-c48f-fb42b173ef5c@gmail.com
The <source>_traverse_files functions take a callback for processing
files, but both the local and libpq source implementations called the
function directly without using the callback argument. While there is
no bug right now as the function called is the same as the callback,
fix by calling the callback to reduce the risk of subtle bugs in the
future.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3Jdwgh+PZr2zh1=t8apA4Yz8tKq+uubPqoCt14nvWKHEw@mail.gmail.com
plperl_array_to_datum() wasn't sufficiently careful about checking
that nested lists represent a rectangular array structure; it would
accept inputs such as "[1, []]". This is a bit related to the
PL/Python bug fixed in commit 81eaaf65e, but it doesn't seem to
provide any direct route to a memory stomp. Instead the likely
failure mode is for makeMdArrayResult to be passed fewer Datums than
the claimed array dimensionality requires, possibly leading to a wild
pointer dereference and SIGSEGV.
Per report from Alexander Lakhin. It's been broken for a long
time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/5ebae5e4-d401-fadf-8585-ac3eaf53219c@gmail.com
If PLySequence_ToArray came across a zero-length sublist, it'd compute
the overall array size as zero, possibly leading to a memory clobber.
(This would likely qualify as a security bug, were it not that plpython
is an untrusted language already.)
I think there are other corner-case issues in this code as well, notably
that the error messages don't match the core code and for some ranges
of array sizes you'd get "invalid memory alloc request size" rather than
the intended message about array size.
Really this code has no business doing its own array size calculation
at all, so remove the faulty code in favor of using ArrayGetNItems().
Per bug #17912 from Alexander Lakhin. Bug seems to have come in with
commit 94aceed31, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17912-82ceed78731d9cdc@postgresql.org
CREATE SCHEMA AUTHORIZATION with appended schema elements can lead to
crashes when comparing the schema name of the query with the schemas
used in the qualification of some clauses in the elements' queries.
The origin of the problem is that the transformation routine for the
elements listed in a CREATE SCHEMA query uses as new, expected, schema
name the one listed in CreateSchemaStmt itself. However, depending on
the query, CreateSchemaStmt.schemaname may be NULL, being computed
instead from the role specification of the query given by the
AUTHORIZATION clause, that could be either:
- A user name string, with the new schema name being set to the same
value as the role given.
- Guessed from CURRENT_ROLE, SESSION_ROLE or CURRENT_ROLE, with a new
schema name computed from the security context where CREATE SCHEMA is
running.
Regression tests are added for CREATE SCHEMA with some appended elements
(some of them with schema qualifications), covering also some role
specification patterns.
While on it, this simplifies the context structure used during the
transformation of the elements listed in a CREATE SCHEMA query by
removing the fields for the role specification and the role type. They
were not used, and for the role specification this could be confusing as
the schema name may by extracted from that at the beginning of
CreateSchemaCommand().
This issue exists for a long time, so backpatch down to all the versions
supported.
Reported-by: Song Hongyu
Author: Michael Paquier
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/17909-f65c12dfc5f0451d@postgresql.org
Backpatch-through: 11
Commit 7d71d3dd08 changed resetting the VacuumFailsafeActive flag to an
assertion since the flag is reset before starting vacuuming a relation.
This however failed to take recursive calls of vacuum_rel() and vacuum
of TOAST tables into consideration. Fix by reverting back to resettting
the flag.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/CAFBsxsFz=GqaG5Ens5aNgVYoV2Y+pfMUijX0ku+CCkWfALwiqg@mail.gmail.com
The test to ensure that decoding changes via logical slot from another
database will fail was incorrectly done on the primary node instead of on
the standby node.
In the passing, make the test to wait for replay catchup by using
wait_for_replay_catchup(). This will make it consistent with the way we
wait at other places in the test.
Author: Shi yu
Reviewed-by: Bertrand Drouvot, Amit Kapila
Discussion: https://postgr.es/m/OSZPR01MB6310B0A507A0F2A2D379F38CFD6A9@OSZPR01MB6310.jpnprd01.prod.outlook.com
The call to XLogGetReplicationSlotMinimumLSN() might return a
greater LSN than the one given to the function. Subsequent segment
number calculations might then underflow, which could result in
unexpected behavior when removing or recyling WAL files. This was
introduced with max_slot_wal_keep_size in c655077639. To fix, skip
the block of code for replication slots if the LSN is greater.
Reported-by: Xu Xingwang
Author: Kyotaro Horiguchi
Reviewed-by: Junwang Zhao
Discussion: https://postgr.es/m/17903-4288d439dee856c6%40postgresql.org
Backpatch-through: 13
As written, pg_dump would call twice parse_compress_specification() for
the custom and directory formats to build a compression specification if
no compression option is defined, as these formats should be compressed
by default when compiled with zlib, or use no compression without zlib.
This made the code logic quite confusing, and the first compression
specification built would be incorrect before being overwritten by the
second one.
Rather than creating two compression specifications, this commit changes
a bit the order of the checks for the compression options so as
compression_algorithm_str is now set to a correct value for the custom
and format directory when no compression option is defined. This makes
the code easier to understand, as parse_compress_specification() is now
called once for all the format, with or without user-specified
compression methods. One comment was also confusing for the non-zlib
case, so remove it while on it.
This code has been introduced in 5e73a60 when adding support for
compression specifications in pg_dump.
Per discussion with Justin Pryzby and Georgios Kokolatos.
Discussion: https://postgr.es/m/20230225050214.GH1653@telsasoft.com
Commit ce6b672e44 changed dumping GRANT commands to ensure that
grantors already have an ADMIN OPTION on the role for which it
is granting permissions. Looping over the grants per role has a
stop condition on dumping the grant statements, but accidentally
missed updating the variable for the conditional check.
Author: Andreas Scherbaum <ads@pgug.de>
Co-authored-by: Artur Zakirov <zaartur@gmail.com>
Discussion: https://postgr.es/m/de44299d-cd31-b41f-2c2a-161fa5e586a5@pgug.de
Commit 664d75753 added the BackgroundPsql module with helper functions
for tests running interactive or background psql tasks. The new module
was however not added to the install rules of the build systems.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/c0ba3008-dbc8-e53f-29f2-2e9abe72b2a2@enterprisedb.com
The recently added inclusion of guc.h in smgr.h is not necessary and
introduces more server-related stuff. Removing the directive helps
avoid potential issues with including sgmr.h in frontends.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20230425.115748.2130383825066921512.horikyota.ntt%40gmail.com
Commit 1021bd6a89 excluded autovacuum workers from cost-limit balance
calculations when per-relation options were set. The code checks for
limit and cost_delay being greater than zero, but since cost_delay can
be set to -1 the test needs to check for greater than or zero.
Backpatch to all supported branches since 1021bd6a89 was backpatched
all the way at the time.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAD21AoBS7o6Ljt_vfqPQPf67AhzKu3fR0iqk8B=vVYczMugKMQ@mail.gmail.com
Backpatch-through: v11 (all supported branches)
The leak would show up when using batch inserts with foreign tables
included in a partition tree, as the slots used in the batch were not
reset once processed. In order to fix this problem, some
ExecClearTuple() are added to clean up the slots used once a batch is
filled and processed, mapping with the number of slots currently in use
as tracked by the counter ri_NumSlots.
This buffer refcount leak has been introduced in b676ac4 with the
addition of the executor facility to improve bulk inserts for FDWs, so
backpatch down to 14.
Alexander has provided the patch (slightly modified by me). The test
for postgres_fdw comes from me, based on the test case that the author
has sent in the report.
Author: Alexander Pyhalov
Discussion: https://postgr.es/m/b035780a740efd38dc30790c76927255@postgrespro.ru
Backpatch-through: 14
vacuum_defer_cleanup_age was introduced before hot_standby_feedback and
replication slots existed. It is hard to use reasonably - commonly it will
either be set too low (not preventing recovery conflicts, while still causing
some bloat), or too high (causing a lot of bloat). The alternatives do not
have that issue.
That on its own might not be sufficient reason to remove
vacuum_defer_cleanup_age, but it also complicates computation of xid
horizons. See e.g. the bug fixed in be504a3e97. It also is untested.
This commit removes TransactionIdRetreatSafely(), as there are no users
anymore. There might be potential future users, hence noting that here.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230317230930.nhsgk3qfk7f4axls@awork3.anarazel.de
Commit 04fe805a1 modified plpgsql so that datatype casts make use of
expressions cached by plancache.c, in place of older code where these
expression trees were managed by plpgsql itself. However, I (tgl)
forgot that we use a separate, shorter-lived cast info hashtable in
DO blocks. The new mechanism thus resulted in session-lifespan
leakage of the plancache data once a DO block containing one or more
casts terminated. To fix, split the cast hash table into two parts,
one that tracks only the plancache's CachedExpressions and one that
tracks the expression state trees generated from them. DO blocks need
their own expression state trees and hence their own version of the
second hash table, but there's no reason they can't share the
CachedExpressions with regular plpgsql functions.
Per report from Ajit Awekar. Back-patch to v12 where the issue
was introduced.
Ajit Awekar and Tom Lane
Discussion: https://postgr.es/m/CAHv6PyrNaqdvyWUspzd3txYQguFTBSnhx+m6tS06TnM+KWc_LQ@mail.gmail.com
The name of this function suggests that it ought to reparent R/W
expanded objects to be children of the persistent aggcontext, instead
of copying them. In fact it does no such thing, and if you try to
make it do so you will see multiple regression failures. Rename it
to the less-misleading ExecAggCopyTransValue, and add commentary
about why that attractive-sounding optimization won't work. Also
adjust comments at call sites, some of which were describing logic
that has since been moved into ExecAggCopyTransValue.
Discussion: https://postgr.es/m/3004282.1681930251@sss.pgh.pa.us
Commit 6df7a9698b accidentally included two identical prototypes for
default_multirange_selectivi() and commit 086cf1458c added a break;
statement where one was already present, thus duplicating it. While
there is no bug caused by this, fix by removing the duplicated lines
as they provide no value.
Backpatch the fix for duplicate prototypes to v14 and the duplicate
break statement fix to all supported branches to avoid backpatching
hazards due to the removal.
Reported-by: Anton Voloshin <a.voloshin@postgrespro.ru>
Discussion: https://postgr.es/m/0e69cb60-0176-f6d0-7e15-6478b7d85724@postgrespro.ru
We need to call them only when validate == true.
Backpatch to 13, where opclass options were introduced.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/2656633.1681831542%40sss.pgh.pa.us
Reviewed-by: Tom Lane, Pavel Borisov
Backpatch-through: 13
For regex escape sequences, just test directly for the relevant ASCII
characters rather than using locale-sensitive character
classification.
This fixes an assertion failure when a locale considers a non-ASCII
character, such as "൧", to be a digit.
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs49Q6UoKGeT8pBkMtJGJd+16CBFZaaWUk9Du+2ERE5g_YA@mail.gmail.com
Backpatch-through: 11
Commit 7f5b198 introduced TAP tests that use string literals to mark
the presence of a query in server logs. Reorder the markers to make
sure they are used in alphabetical order for easier debugging.
Author: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CABwTF4WcYAENqyUQS2crAYfDuJ497v82ty2-MirjaC+zz9e8nQ@mail.gmail.com
The errormessage for an incorrect require_auth method wasn't using the
common "invalid %s value" errormessage which lessens the burden on our
translators. Fix by changing to that format to make use of existing
translations and to make error messages consistent in wording.
Reported and fixed by Gurjeet Singh with some tweaking by myself.
Author: Gurjeet Singh <gurjeet@singh.im>
Discussion: https://postgr.es/m/CABwTF4Xu3g9zohJ9obu8m7MKbf8g63NgpRDjwqPHQgAtB+Gb8Q@mail.gmail.com
a9c70b46 added the statistics view pg_stat_io which contained columns
"io_context" and "io_object". Given that the columns are in the
pg_stat_io view, the "io" prefix is somewhat redundant, so remove it.
The code variables referring to these fields are kept unchanged so as
they can keep their context about I/O.
Bump catalog version.
Author: Melanie Plageman
Reviewed-by: Kyotaro Horiguchi, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CAAKRu_aAQoJWrvT2BYYQvJChFKra_O-5ra3jhzKJZqWsTR1CPQ@mail.gmail.com