This is slightly tedious because the adjustments cascade through
a couple of levels of subroutines, but it's not very hard.
I chose to avoid changing function signatures more than absolutely
necessary, by passing the escontext pointer in existing structs
where possible.
tsquery's nuisance NOTICEs about empty queries are suppressed in
soft-error mode, since they're not errors and we surely don't want
them to be shown to the user anyway. Maybe that whole behavior
should be reconsidered.
Discussion: https://postgr.es/m/3824377.1672076822@sss.pgh.pa.us
Historically these input functions just called strtoul or strtoull
and returned the result, with no error detection whatever. Upgrade
them to reject garbage input and out-of-range values, similarly to
our other numeric input routines.
To share the code for this with type oid, adjust the existing
"oidin_subr" to be agnostic about the SQL name of the type it is
handling, and move it to numutils.c; then clone it for 64-bit types.
Because the xid types previously accepted hex and octal input by
reason of calling strtoul[l] with third argument zero, I made the
common subroutine do that too, with the consequence that type oid
now also accepts hex and octal input. In view of 6fcda9aba, that
seems like a good thing.
While at it, simplify the existing over-complicated handling of
syntax errors from strtoul: we only need one ereturn not three.
Discussion: https://postgr.es/m/3526121.1672000729@sss.pgh.pa.us
This enables streaming or serializing changes immediately in logical
decoding. This parameter is intended to be used to test logical decoding
and replication of large transactions for which otherwise we need to
generate the changes till logical_decoding_work_mem is reached.
This helps in reducing the timing of existing tests related to logical
replication of in-progress transactions and will help in writing tests for
for the upcoming feature for parallelly applying large in-progress
transactions.
Author: Shi yu
Reviewed-by: Sawada Masahiko, Shveta Mallik, Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi
Discussion: https://postgr.es/m/OSZPR01MB63104E7449DBE41932DB19F1FD1B9@OSZPR01MB6310.jpnprd01.prod.outlook.com
ed1a88dda added support functions for the ntile(), percent_rank() and
cume_dist() window functions but neglected to actually add these support
functions to the pg_proc entry for the corresponding window function.
Also, take this opportunity to add these window functions to one of the
regression tests added in ed1a88dda to give the support functions a little
bit of exercise. If I'd done that in the first place then the omission
would have been more obvious.
Bump the catversion, again.
An epoll fd belonging to the parent should be closed in the child. A
kqueue fd is automatically closed by fork(), but we should still adjust
our counter. For poll and Windows systems, nothing special is required.
On all systems we free the memory.
No caller yet, but we'll need this if we start using WaitEventSet in the
postmaster as planned.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
To be able to handle incoming connections on a server socket with
the WaitEventSet API, we'll need a new kind of event to indicate that
the the socket is ready to accept a connection.
On Unix, it's just the same as WL_SOCKET_READABLE, but on Windows there
is a different underlying kernel event that we need to map our
abstraction to.
No user yet, but a proposed patch would use this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
The former name was discussed as being confusing, so use "split", as per
a suggestion from Magnus Hagander.
While on it, one of the output arguments is renamed from "segno" to
"segment_number", as per a suggestion from Kyotaro Horiguchi.
The documentation is updated to reflect all these changes.
Bump catalog version.
Author: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CABUevEytQVaOOhGdoh0D7hGwe3fuKcRF6NthsSW7ww04EmtFgQ@mail.gmail.com
WindowFuncs such as row_number() don't care if it's called with ROWS
UNBOUNDED PRECEDING AND CURRENT ROW or with RANGE UNBOUNDED PRECEDING AND
CURRENT ROW. The latter is less efficient as the RANGE option requires
that the executor check for peer rows, so using the ROW option instead
would cause less overhead. Because RANGE is part of the default frame
options for WindowClauses, it means WindowAgg is, by default, working much
harder than it needs to for window functions where the ROWS / RANGE option
has no effect on the window function's result.
On a test query from the discussion thread, a performance improvement of
344% was seen by using ROWS instead of RANGE.
Here we add a new support function node type to allow support functions to
be called for window functions so that the most optimal version of the
frame options can be set. The planner has been adjusted so that the frame
options are changed only if all window functions sharing the same window
clause agree on what the optimized frame options are.
Here we give the ability for row_number(), rank(), dense_rank(),
percent_rank(), cume_dist() and ntile() to alter their WindowClause's
frameOptions.
Reviewed-by: Vik Fearing, Erwin Brandstetter, Zhihong Yu
Discussion: https://postgr.es/m/CAGHENJ7LBBszxS+SkWWFVnBmOT2oVsBhDMB1DFrgerCeYa_DyA@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvohAKEtTXxq7Pc-ic2dKT8oZfbRKeEJP64M0B6+S88z+A@mail.gmail.com
Use a dedicated struct for the XID/MXID cutoffs used by VACUUM, such as
FreezeLimit and OldestXmin. This state is initialized in vacuum.c, and
then passed around by code from vacuumlazy.c to heapam.c freezing
related routines. The new convention is that everybody works off of the
same cutoff state, which is passed around via pointers to const.
Also simplify some of the logic for dealing with frozen xmin in
heap_prepare_freeze_tuple: add dedicated "xmin_already_frozen" state to
clearly distinguish xmin XIDs that we're going to freeze from those that
were already frozen from before. That way the routine's xmin handling
code is symmetrical with the existing xmax handling code. This is
preparation for an upcoming commit that will add page level freezing.
Also refactor the control flow within FreezeMultiXactId(), while adding
stricter sanity checks. We now test OldestXmin directly, instead of
using FreezeLimit as an inexact proxy for OldestXmin. This is further
preparation for the page level freezing work, which will make the
function's caller cede control of page level freezing to the function
where appropriate (where heap_prepare_freeze_tuple sees a tuple that
happens to contain a MultiXactId in its xmax).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CAH2-WznS9TxXmz2_=SY+SyJyDFbiOftKofM9=aDo68BbXNBUMA@mail.gmail.com
The previous coding of VA_ARGS_NARGS() always returned 1 on Visual
Studio, because it treats __VA_ARGS__ as a single token unless you jump
through extra hoops. Newer compilers have an option to fix that. Add a
comment about that so that we can remember to clean this up in the
future when our minimum MSVC version advances.
Author: Victor Spirin <v.spirin@postgrespro.ru>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/f450fc57-a147-19d0-e50c-33571c52cc13%40postgrespro.ru
This introduces palloc_aligned() and MemoryContextAllocAligned() which
allow callers to obtain memory which is allocated to the given size and
also aligned to the specified alignment boundary. The alignment
boundaries may be any power-of-2 value. Currently, the alignment is
capped at 2^26, however, we don't expect values anything like that large.
The primary expected use case is to align allocations to perhaps CPU
cache line size or to maybe I/O page size. Certain use cases can benefit
from having aligned memory by either having better performance or more
predictable performance.
The alignment is achieved by requesting 'alignto' additional bytes from
the underlying allocator function and then aligning the address that is
returned to the requested alignment. This obviously does waste some
memory, so alignments should be kept as small as what is required.
It's also important to note that these alignment bytes eat into the
maximum allocation size. So something like:
palloc_aligned(MaxAllocSize, 64, 0);
will not work as we cannot request MaxAllocSize + 64 bytes.
Additionally, because we're just requesting the requested size plus the
alignment requirements from the given MemoryContext, if that context is
the Slab allocator, then since slab can only provide chunks of the size
that's specified when the slab context is created, then this is not going
to work. Slab will generate an error to indicate that the requested size
is not supported.
The alignment that is requested in palloc_aligned() is stored along with
the allocated memory. This allows the alignment to remain intact through
repalloc() calls.
Author: Andres Freund, David Rowley
Reviewed-by: Maxim Orlov, Andres Freund, John Naylor
Discussion: https://postgr.es/m/CAApHDvpxLPUMV1mhxs6g7GNwCP6Cs6hfnYQL5ffJQTuFAuxt8A%40mail.gmail.com
This is the guts of float4in, callable as a routine to input floats,
which will be useful in an upcoming patch for allowing soft errors in
the seg module's input function.
A similar operation was performed some years ago for float8in in
commit 50861cd683.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/cee4e426-d014-c0b7-aa22-a659f2cd9130@dunslane.net
1349d279 added query planner support to allow more efficient execution of
aggregate functions which have an ORDER BY or a DISTINCT clause. Prior to
that commit, the planner would only request that the lower planner produce
a plan with the order required for the GROUP BY clause and it would be
left up to nodeAgg.c to perform the final sort of records within each
group so that the aggregate transition functions were called in the
correct order. Now that the planner requests the lower planner produce a
plan with the GROUP BY and the ORDER BY / DISTINCT aggregates in mind,
there is the possibility that the planner chooses a plan which could be
less efficient than what would have been produced before 1349d279.
While developing 1349d279, I had in mind that Incremental Sort would help
us in cases where an index exists only on the GROUP BY column(s).
Incremental Sort would just replace the implicit tuplesorts which are
being performed in nodeAgg.c. However, because the planner has the
flexibility to instead choose a plan which just performs a full sort on
both the GROUP BY and ORDER BY / DISTINCT aggregate columns, there is
potential for the planner to make a bad choice. The costing for
Incremental Sort is not perfect as it assumes an even distribution of rows
to sort within each sort group.
Here we add an escape hatch in the form of the enable_presorted_aggregate
GUC. This will allow users to get the pre-PG16 behavior in cases where
they have no other means to convince the query planner to produce a plan
which only sorts on the GROUP BY column(s).
Discussion: https://postgr.es/m/CAApHDvr1Sm+g9hbv4REOVuvQKeDWXcKUAhmbK5K+dfun0s9CvA@mail.gmail.com
This function takes in input a WAL segment name and returns a tuple made
of the segment sequence number (dependent on the WAL segment size of the
cluster) and its timeline, as of a thin SQL wrapper around the existing
XLogFromFileName().
This function has multiple usages, like being able to compile a LSN from
a file name and an offset, or finding the timeline of a segment without
having to do to some maths based on the first eight characters of the
segment.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Kyotaro Horiguchi, Maxim Orlov, Michael
Paquier
Discussion: https://postgr.es/m/CALj2ACWV=FCddsxcGbVOA=cvPyMr75YCFbSQT6g4KDj=gcJK4g@mail.gmail.com
SCRAM_KEY_LEN was a variable used in the internal routines of SCRAM to
size a set of fixed-sized arrays used in the SHA and HMAC computations
during the SASL exchange or when building a SCRAM password. This had a
hard dependency on SHA-256, reducing the flexibility of SCRAM when it
comes to the addition of more hash methods. A second issue was that
SHA-256 is assumed as the cryptohash method to use all the time.
This commit renames SCRAM_KEY_LEN to a more generic SCRAM_KEY_MAX_LEN,
which is used as the size of the buffers used by the internal routines
of SCRAM. This is aimed at tracking centrally the maximum size
necessary for all the hash methods supported by SCRAM. A global
variable has the advantage of keeping the code in its simplest form,
reducing the need of more alloc/free logic for all the buffers used in
the hash calculations.
A second change is that the key length (SHA digest length) and hash
types are now tracked by the state data in the backend and the frontend,
the common portions being extended to handle these as arguments by the
internal routines of SCRAM. There are a few RFC proposals floating
around to extend the SCRAM protocol, including some to use stronger
cryptohash algorithms, so this lifts some of the existing restrictions
in the code.
The code in charge of parsing and building SCRAM secrets is extended to
rely on the key length and on the cryptohash type used for the exchange,
assuming currently that only SHA-256 is supported for the moment. Note
that the mock authentication simply enforces SHA-256.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Jonathan Katz
Discussion: https://postgr.es/m/Y5k3Qiweo/1g9CG6@paquier.xyz
A new function pg_stat_get_backend_subxact() can be used to get
information about the number of subtransactions in the cache of
a particular backend and whether that cache has overflowed. This
can be useful for tracking down performance problems that can
result from overflowed snapshots.
Dilip Kumar, reviewed by Zhihong Yu, Nikolay Samokhvalov,
Justin Pryzby, Nathan Bossart, Ashutosh Sharma, Julien
Rouhaud. Additional design comments from Andres Freund,
Tom Lane, Bruce Momjian, and David G. Johnston.
Discussion: http://postgr.es/m/CAFiTN-ut0uwkRJDQJeDPXpVyTWD46m3gt3JDToE02hTfONEN=Q@mail.gmail.com
The building of command completion tags could often be seen showing up in
profiles when running high tps workloads.
The query completion tags were being built with snprintf, which is slow at
the best of times when compared with more manual ways of formatting
strings. Here we introduce BuildQueryCompletionString() to do this job
for us. We also now store the completion tag's strlen in the
CommandTagBehavior struct so that we can quickly memcpy this number of
bytes into the completion tag string. Appending the rows affected is done
via pg_ulltoa_n. BuildQueryCompletionString returns the length of the
built string. This saves us having to call strlen to figure out how many
bytes to pass to pq_putmessage().
Author: David Rowley, Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAHoyFK-Xwqc-iY52shj0G+8K9FJpse+FuZ36XBKy78wDVnd=Qg@mail.gmail.com
This is mostly straightforward, except that if the range type
has a canonical function, that might throw an error during range
input. (Such errors probably only occur for edge cases: in the
in-core canonical functions, it happens only if a bound has the
maximum valid value for the underlying type.) Hence, this patch
extends the soft-error regime to allow canonical functions to
return errors softly as well. Extensions implementing range
canonical functions will need modification anyway because of the
API change for range_serialize(); while at it, they might want
to do something similar to what's been done here in the in-core
canonical functions.
Discussion: https://postgr.es/m/3284599.1671075185@sss.pgh.pa.us
Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
This referred to the size of the buffers for k_ipad and k_opad in HMAC
computations. This is unused since e6bdfd9, where SCRAM has switched to
the cryptohash routines for its HMAC calculations rather than its own
maths.
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/Y5gGMjXhyp0oK0mH@paquier.xyz
Commits f92944137 et al. made IsInTransactionBlock() set the
XACT_FLAGS_NEEDIMMEDIATECOMMIT flag before returning "false",
on the grounds that that kept its API promises equivalent to those of
PreventInTransactionBlock(). This turns out to be a bad idea though,
because it allows an ANALYZE in a pipelined series of commands to
cause an immediate commit, which is unexpected.
Furthermore, if we return "false" then we have another issue,
which is that ANALYZE will decide it's allowed to do internal
commit-and-start-transaction sequences, thus possibly unexpectedly
committing the effects of previous commands in the pipeline.
To fix the latter situation, invent another transaction state flag
XACT_FLAGS_PIPELINING, which explicitly records the fact that we
have executed some extended-protocol command and not yet seen a
commit for it. Then, require that flag to not be set before allowing
InTransactionBlock() to return "false".
Having done that, we can remove its setting of NEEDIMMEDIATECOMMIT
without fear of causing problems. This means that the API guarantees
of IsInTransactionBlock now diverge from PreventInTransactionBlock,
which is mildly annoying, but it seems OK given the very limited usage
of IsInTransactionBlock. (In any case, a caller preferring the old
behavior could always set NEEDIMMEDIATECOMMIT for itself.)
For consistency also require XACT_FLAGS_PIPELINING to not be set
in PreventInTransactionBlock. This too is meant to prevent commands
such as CREATE DATABASE from silently committing previous commands
in a pipeline.
Per report from Peter Eisentraut. As before, back-patch to all
supported branches (which sadly no longer includes v10).
Discussion: https://postgr.es/m/65a899dd-aebc-f667-1d0a-abb89ff3abf8@enterprisedb.com
During ALTER TABLE execution, when prep-time handling of subcommands of
certain types determine that execution-time handling requires recursion,
they signal this by changing the subcommand type to a special value.
This can be done in a simpler way by using a separate flag introduced by
commit ec0925c22a, so do that.
Catversion bumped. It's not clear to me that ALTER TABLE subcommands
are stored anywhere in catalogs (CREATE FUNCTION rejects it in BEGIN
ATOMIC function bodies), but we do have both write and read support for
them, so be safe.
Discussion: https://postgr.es/m/20220929090033.zxuaezcdwh2fgfjb@alvherre.pgsql
This requires a bit of further infrastructure-extension to allow
trapping errors reported by numeric_in and pg_unicode_to_server,
but otherwise it's pretty straightforward.
In the case of jsonb_in, we are only capturing errors reported
during the initial "parse" phase. The value-construction phase
(JsonbValueToJsonb) can also throw errors if assorted implementation
limits are exceeded. We should improve that, but it seems like a
separable project.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/3bac9841-fe07-713d-fa42-606c225567d6@dunslane.net
Formerly, semantic action functions for the JSON parser returned void,
so that there was no way for them to affect the parser's behavior.
That means in particular that they can't force an error exit except by
longjmp'ing. That won't do in the context of our project to make input
functions return errors softly. Hence, change them to return the same
JsonParseErrorType enum value as the parser itself uses. If an action
function returns anything besides JSON_SUCCESS, the parse is abandoned
and that error code is returned.
Action functions can thus easily return the same error conditions that
the parser already knows about. As an escape hatch for expansion, also
invent a code JSON_SEM_ACTION_FAILED that the core parser does not know
the exact meaning of. When returning this code, an action function
must use some out-of-band mechanism for reporting the error details.
This commit simply makes the API change and causes all the existing
action functions to return JSON_SUCCESS, so that there is no actual
change in behavior here. This is long enough and boring enough that
it seemed best to commit it separately from the changes that make
real use of the new mechanism.
In passing, remove a duplicate assignment of
transform_string_values_scalar.
Discussion: https://postgr.es/m/1436686.1670701118@sss.pgh.pa.us
Replace the error trapping scheme introduced in 5bc450629 with our
shiny new errsave/ereturn mechanism. This doesn't have any real
functional impact (although I think that the new coding is able
to report a few more errors softly than v15 did). And I doubt
there's any measurable performance difference either. But this
gets rid of an ad-hoc, one-of-a-kind design in favor of a mechanism
that will be widely used going forward, so it should be a net win
for code readability.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
This patch converts the input functions for date, time, timetz,
timestamp, timestamptz, and interval to the new soft-error style.
There's some related stuff in formatting.c that remains to be
cleaned up, but that seems like a separable project.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Pay down some ancient technical debt (dating to commit 022fd9966):
fix a couple of places in datetime parsing that were throwing
ereport's immediately instead of returning a DTERR code that could be
interpreted by DateTimeParseError. The reason for that was that there
was no mechanism for passing any auxiliary data (such as a zone name)
to DateTimeParseError, and these errors seemed to really need it.
Up to now it didn't matter that much just where the error got thrown,
but now we'd like to have a hard policy that datetime parse errors
get thrown from just the one place.
Hence, invent a "DateTimeErrorExtra" struct that can be used to
carry any extra values needed for specific DTERR codes. Perhaps
in the future somebody will be motivated to use this to improve
the specificity of other DateTimeParseError messages, but for now
just deal with the timezone-error cases.
This is on the way to making the datetime input functions report
parse errors softly; but it's really an independent change, so
commit separately.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
More could be done in this line, but I just grabbed some low-hanging
fruit. Principal objective was to remove the need for several ugly
unconstify() usages in formatting.c.
This patch converts the input functions for bool, int2, int4, int8,
float4, float8, numeric, and contrib/cube to the new soft-error style.
array_in and record_in are also converted. There's lots more to do,
but this is enough to provide proof-of-concept that the soft-error
API is usable, as well as reference examples for how to convert
input functions.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
pg_input_is_valid() returns boolean, while pg_input_error_message()
returns the primary error message if the input is bad, or NULL
if the input is OK. The main reason for having two functions is
so that we can test both the details-wanted and the no-details-wanted
code paths.
Although these are primarily designed with testing in mind,
it could well be that they'll be useful to end users as well.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Postgres' standard mechanism for reporting errors (ereport() or elog())
is used for all sorts of error conditions. This means that throwing
an exception via ereport(ERROR) requires an expensive transaction or
subtransaction abort and cleanup, since the exception catcher dare not
make many assumptions about what has gone wrong. There are situations
where we would rather have a lighter-weight mechanism for dealing
with errors that are known to be safe to recover from without a full
transaction cleanup. This commit creates infrastructure to let us
adapt existing error-reporting code for that purpose. See the
included documentation changes for details. Follow-on commits will
provide test code and usage examples.
The near-term plan is to convert most if not all datatype input
functions to report invalid input "softly". This will enable
implementing some SQL/JSON features cleanly and without the cost
of subtransactions, and it will also allow creating COPY options
to deal with bad input without cancelling the whole COPY.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks also to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
The USER SET flag specifies that the variable should be set on behalf of an
ordinary role. That lets ordinary roles set placeholder variables, which
permission requirements are not known yet. Such a value wouldn't be used if
the variable finally appear to require superuser privileges.
The new flags are stored in the pg_db_role_setting.setuser array. Catversion
is bumped.
This commit is inspired by the previous work by Steve Chavez.
Discussion: https://postgr.es/m/CAPpHfdsLd6E--epnGqXENqLP6dLwuNZrPMcNYb3wJ87WR7UBOQ%40mail.gmail.com
Author: Alexander Korotkov, Steve Chavez
Reviewed-by: Pavel Borisov, Steve Chavez
Make the argument types of the File API match stdio better:
- Change the data buffer to void *, from char *.
- Change FileWrite() data buffer to const on top of that.
- Change amounts to size_t, from int.
In passing, change the FilePrefetch() amount argument from int to
off_t, to match the underlying posix_fadvise().
Discussion: https://www.postgresql.org/message-id/flat/11dda853-bb5b-59ba-a746-e168b1ce4bdb%40enterprisedb.com
In commit ffbb7e65a, I added a ModifyTableState member to ResultRelInfo
to save the owning ModifyTableState for use by nodeModifyTable.c when
performing batch inserts, but as pointed out by Tom Lane, that changed
the array stride of es_result_relations, and that would break any
previously-compiled extension code that accesses that array. Fix by
removing that member from ResultRelInfo and instead adding a List member
at the end of EState to save such ModifyTableStates.
Per report from Tom Lane. Back-patch to v14, like the previous commit;
I chose to apply the patch to HEAD as well, to make back-patching easy.
Discussion: http://postgr.es/m/4065383.1669395453%40sss.pgh.pa.us
After restart, we don't perform streaming of an in-progress transaction if
it was previously decoded and confirmed by the client. To achieve that we
were comparing the END location of the WAL record being decoded with the
WAL location we have already decoded and confirmed by the client. While
decoding the commit record, to decide whether to process and send the
complete transaction, we compare its START location with the WAL location
we have already decoded and confirmed by the client. Now, if we need to
queue some change in the transaction while decoding the commit record
(e.g. snapshot), it is possible that we decide to stream the transaction
but later commit processing decides to skip it. In such a case, we would
needlessly send the changes and later when we decide to skip it, we will
send stream abort.
We also sometimes decide to stream the changes when we actually just need
to process them locally like a change for invalidations. This will lead us
to send empty streams. To avoid this, while queuing each change for
decoding, we remember whether the transaction has any change that actually
needs to be sent downstream and use that information later to decide
whether to stream the transaction or not.
Note, we can't avoid all cases where we have to send empty streams like
the case where the plugin later decides that the change is not
publishable. However, we will no longer need to send stream_abort when we
skip sending a particular transaction.
Author: Dilip Kumar
Reviewed-by: Hou Zhijie, Ashutosh Bapat, Shi yu, Amit Kapila
Discussion: https://postgr.es/m/CAFiTN-tHK=7LzfrPs8fbT2ksrOJGQbzywcgXst2bM9-rJJAAUg@mail.gmail.com
Generate a Makefile.global that's complete enough for PGXS to work for some
extensions. It is likely that this compatibility layer will not suffice for
every extension and not all platforms - we can expand it over time.
This allows extensions to use a single buildsystem across all the supported
postgres versions. Once all supported PG versions support meson, we can remove
the compatibility layer.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
The same code pattern is repeated 21 times for int64 counters (0 for
missing entry) and 5 times for doubles (0 for missing entry) on database
entries. This code is switched to use macros for the basic code
instead, shaving a few hundred lines of originally-duplicated code
patterns. The function names remain the same, but some fields of
PgStat_StatDBEntry have to be renamed to cope with the new style.
This is in the same spirit as 83a1a1b.
Author: Michael Paquier
Reviewed-by: Nathan Bossart, Bertrand Drouvot
Discussion: https://postgr.es/m/Y46stlxQ2LQE20Na@paquier.xyz
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
The same code pattern is repeated 17 times for int64 counters (0 for
missing entry) and 5 times for timestamps (NULL for missing entry) on
table entries. This code is switched to use a macro for the basic code
instead, shaving a few hundred lines of originally-duplicated code. The
function names remain the same, but some fields of PgStat_StatTabEntry
have to be renamed to cope with the new style.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart
Discussion: https:/postgr.es/m/20221204173207.GA2669116@nathanxps13
A couple of places weren't up to speed for this. By sheer good
luck, we didn't fail but just selected a non-memoized join plan,
at least in the test case we have. Nonetheless, it's a bug,
and I'm not quite sure that it couldn't have worse consequences
in other examples. So back-patch to v14 where Memoize came in.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com
Just because I'm a neatnik, and I'm currently working on
code in this area. It annoys me to not be able to pgindent
my patches without working around unrelated changes.
It seems better to deal with this by explicit annotations on the
fields in question, instead of magic knowledge embedded in the
script. While that creates a risk-of-omission from failing to
annotate fields, the preceding commit should catch any such
oversights.
Discussion: https://postgr.es/m/263413.1669513145@sss.pgh.pa.us
ri_RootToPartitionMap is currently only initialized for tuple routing
target partitions, though a future commit will need the ability to use
it even for the non-partition child tables, so make adjustments to the
decouple it from the partitioning code.
Also, make it lazily initialized via ExecGetRootToChildMap(), making
that function its preferred access path. Existing third-party code
accessing it directly should no longer do so; consequently, it's been
renamed to ri_RootToChildMap, which also makes it consistent with
ri_ChildToRootMap.
ExecGetRootToChildMap() houses the logic of setting the map appropriately
depending on whether a given child relation is partition or not.
To support this, also add a separate entry point for TupleConversionMap
creation that receives an AttrMap. No new code here, just split an
existing function in two.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYUhDXSK5BTvG_xk=eaAEJCD4GS3C6uH7ybBvv+Z_Tmg@mail.gmail.com
For Updates and Deletes, we were not honoring the columns list for old
tuple values while sending tuple data via pgoutput. This results in
pgoutput emitting more columns than expected.
This is not a problem for built-in logical replication as we simply ignore
additional columns based on the relation information sent previously which
didn't have those columns. However, some other users of pgoutput plugin
may expect the columns as per the column list. Also, sending extra columns
unnecessarily consumes network bandwidth defeating the purpose of the
column list feature.
Reported-by: Gunnar Morling
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/CADGJaX9kiRZ-OH0EpWF5Fkyh1ZZYofoNRCrhapBfdk02tj5EKg@mail.gmail.com
The planner will now add a given PartitioPruneInfo to
PlannedStmt.partPruneInfos instead of directly to the
Append/MergeAppend plan node. What gets set instead in the
latter is an index field which points to the list element
of PlannedStmt.partPruneInfos containing the PartitioPruneInfo
belonging to the plan node.
A later commit will make AcquireExecutorLocks() do the initial
partition pruning to determine a minimal set of partitions to be
locked when validating a plan tree and it will need to consult the
PartitioPruneInfos referenced therein to do so. It would be better
for the PartitioPruneInfos to be accessible directly than requiring
a walk of the plan tree to find them, which is easier when it can be
done by simply iterating over PlannedStmt.partPruneInfos.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
A future commit will move the checkAsUser field from RangeTblEntry
to a new node that, unlike RTEs, will only be created for tables
mentioned in the query but not for the inheritance child relations
added to the query by the planner. So, checkAsUser value for a
given child relation will have to be obtained by referring to that
for its ancestor mentioned in the query.
In preparation, it seems better to expand the use of RelOptInfo.userid
during planning in place of rte->checkAsUser so that there will be
fewer places to adjust for the above change.
Given that the child-to-ancestor mapping is not available during the
execution of a given "child" ForeignScan node, add a checkAsUser
field to ForeignScan to carry the child relation's RelOptInfo.userid.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGFCs2uq7VRKi7g+FFKbP6Ea_2_HkgZb2HPhUfaAKT3ng@mail.gmail.com
This commit moves the code in charge of deparsing the method and detail
strings fed later to parse_compress_specification() to a common routine,
where the backward-compatible case of only an integer being found (N
= 0 => "none", N > 1 => gzip at level N) is handled.
Note that this has a side-effect for pg_basebackup, as we now attempt to
detect "server-" and "client-" before checking for the integer-only
pre-14 grammar, where values like server-N and client-N (without the
follow-up detail string) are now valid rather than failing because of an
unsupported method name. Past grammars are still handled the same way,
but these flavors are now authorized, and would now switch to consider N
= 0 as no compression and N > 1 as gzip with the compression level used
as N, with the caller still controlling if the compression method should
be done server-side, client-side or is unspecified. The documentation
of pg_basebackup is updated to reflect that.
This benefits other code paths that would like to rely on the same logic
as pg_basebackup and pg_receivewal with option values used for
compression specifications, one area discussed lately being pg_dump.
Author: Georgios Kokolatos, Michael Paquier
Discussion: https://postgr.es/m/O4mutIrCES8ZhlXJiMvzsivT7ztAMja2lkdL1LJx6O5f22I2W8PBIeLKz7mDLwxHoibcnRAYJXm1pH4tyUNC4a8eDzLn22a6Pb1S74Niexg=@pm.me
Previously, we'd compress only when the active range of array entries
reached Max(4 * PROCARRAY_MAXPROCS, 2 * pArray->numKnownAssignedXids).
If max_connections is large, the first term could result in not
compressing for a long time, resulting in much wastage of cycles in
hot-standby backends scanning the array to take snapshots. Get rid
of that term, and just bound it to 2 * pArray->numKnownAssignedXids.
That however creates the opposite risk, that we might spend too much
effort compressing. Hence, consider compressing only once every 128
commit records. (This frequency was chosen by benchmarking. While
we only tried one benchmark scenario, the results seem stable over
a fairly wide range of frequencies.)
Also, force compression when processing RecoveryInfo WAL records
(which should be infrequent); the old code could perform compression
then, but would do so only after the same array-range check as for
the transaction-commit path.
Also, opportunistically run compression if the startup process is about
to wait for WAL, though not oftener than once a second. This should
prevent cases where we waste lots of time by leaving the array
not-compressed for long intervals due to low WAL traffic.
Lastly, add a simple check to keep us from uselessly compressing
when the array storage is already compact.
Back-patch, as the performance problem is worse in pre-v14 branches
than in HEAD.
Simon Riggs and Michail Nikolaev, with help from Tom Lane and
Andres Freund.
Discussion: https://postgr.es/m/CALdSSPgahNUD_=pB_j=1zSnDBaiOtqVfzo8Ejt5J_k7qZiU1Tw@mail.gmail.com
When it's given as true, return a 0 in the position of the missing
column rather than raising an error.
This is currently unused, but it allows us to reimplement column
permission checking in a subsequent commit. It seems worth breaking
into a separate commit because it affects unrelated code.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFfiai=qBxPDTjaio_ZcaqUKh+FC=prESrB8ogZgFNNNQ@mail.gmail.com
Previously, an idle startup (recovery) process would wake up every 5
seconds to have a chance to poll for promote_trigger_file, even if that
GUC was not configured. That promotion triggering mechanism was
effectively superseded by pg_ctl promote and pg_promote() a long time
ago. There probably aren't many users left and it's very easy to change
to the modern mechanisms, so we agreed to remove the feature.
This is part of a campaign to reduce wakeups on idle systems.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Discussion: https://postgr.es/m/CANbhV-FsjnzVOQGBpQ589%3DnWuL1Ex0Ykn74Nh1hEjp2usZSR5g%40mail.gmail.com
This provides two new predefined roles: pg_vacuum_all_tables and
pg_analyze_all_tables. Roles which have been granted these roles can
perform vacuum or analyse respectively on any or all tables as if they
were a superuser. This removes the need to grant superuser privilege to
roles just so they can perform vacuum and/or analyze.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Commit b663a4136, which allowed FDWs to INSERT rows in bulk, added to
nodeModifyTable.c code to flush pending inserts to the foreign-table
result relation(s) before completing processing of the ModifyTable node,
but the code failed to take into account the case where the INSERT query
has modifying CTEs, leading to incorrect results.
Also, that commit failed to flush pending inserts before firing BEFORE
ROW triggers so that rows are visible to such triggers.
In that commit we scanned through EState's
es_tuple_routing_result_relations or es_opened_result_relations list to
find the foreign-table result relations to which pending inserts are
flushed, but that would be inefficient in some cases. So to fix, 1) add
a List member to EState to record the insert-pending result relations,
and 2) modify nodeModifyTable.c so that it adds the foreign-table result
relation to the list in ExecInsert() if appropriate, and flushes pending
inserts properly using the list where needed.
While here, fix a copy-and-pasteo in a comment in ExecBatchInsert(),
which was added by that commit.
Back-patch to v14 where that commit appeared.
Discussion: https://postgr.es/m/CAPmGK16qutyCmyJJzgQOhfBq%3DNoGDqTB6O0QBZTihrbqre%2BoxA%40mail.gmail.com
The code has been assuming already in a few places that the initial
recursion nesting depth is 0, and the recent changes in hba.c (mainly
783e8c6) have relies on this assumption in more places. The maximum
recursion nesting level is assumed to be 10 for hba.c and GUCs.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20221124090724.n7amf5kpdhx6vb76@jrouhaud
pg_hba.conf and pg_ident.conf gain support for three record keywords:
- "include", to include a file.
- "include_if_exists", to include a file, ignoring it if missing.
- "include_dir", to include a directory of files. These are classified
by name (C locale, mostly) and need to be prefixed by ".conf", hence
following the same rules as GUCs.
This commit relies on the refactoring pieces done in efc9816, ad6c528,
783e8c6 and 1b73d0b, adding a small wrapper to build a list of
TokenizedAuthLines (tokenize_include_file), and the code is shaped to
offer some symmetry with what is done for GUCs with the same options.
pg_hba_file_rules and pg_ident_file_mappings gain a new field called
file_name, to track from which file a record is located, taking
advantage of the addition of rule_number in c591300 to offer an
organized view of the HBA or ident records loaded.
Bump catalog version.
Author: Julien Rouhaud
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
When building hash indexes using the spool method, tuples are added to the
index page in hashkey order. Because of this, we can safely skip
performing the binary search on the existing tuples on the page to find
the location to insert the tuple based on its hashkey value. For this
case, we can just always put the tuple at the end of the item array as the
tuples will always arrive in hashkey order.
Testing has shown that this can improve hash index build speeds by 5-15%
with a unique set of integer values.
Author: Simon Riggs
Reviewed-by: David Rowley
Tested-by: David Zhang, Tomas Vondra
Discussion: https://postgr.es/m/CANbhV-GBc5JoG0AneUGPZZW3o4OK5LjBGeKe_icpC3R1McrZWQ@mail.gmail.com
The list of TokenizedAuthLines generated at parsing for the HBA and
ident files is now stored in a static context called tokenize_context,
where only all the parsed tokens are stored. This context is created
when opening the first authentication file of a HBA/ident set (hba_file
or ident_file), and is cleaned up once we are done all the work around
it through a new routine called free_auth_file(). One call of
open_auth_file() should have one matching call of free_auth_file(), the
creation and deletion of the tokenization context is controlled by the
recursion depth of the tokenization.
Rather than having tokenize_auth_file() return a memory context that
includes all the records, the tokenization logic now creates and deletes
one memory context each time this function is called. This will
simplify recursive calls to this routine for the upcoming inclusion
record logic.
While on it, rename tokenize_inc_file() to tokenize_expand_file() as
this would conflict with the upcoming patch that will add inclusion
records for HBA/ident files. An '@' file has its tokens added to an
existing list.
Reloading HBA/indent configuration in a tight loop shows no leaks, as of
one type of test done (with and without -DEXEC_BACKEND).
Author: Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/Y324HvGKiWxW2yxe@paquier.xyz
Some custom table access method may have their tuple format and use custom
executor nodes for their custom scan types. The ability to set a custom slot
would save them from tuple format conversion. Other users of custom executor
nodes may also benefit.
Discussion: https://postgr.es/m/CAPpHfduJUU6ToecvTyRE_yjxTS80FyPpct4OHaLFk3OEheMTNA@mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov
We're running out of bits for new permissions. This change doubles the
number of permissions we can accomodate from 16 to 32, so the
forthcoming new ones for vacuum/analyze don't exhaust the pool.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Pass VACUUM parameters (VacuumParams state) to vacuum_set_xid_limits()
directly, rather than passing most individual VacuumParams fields as
separate arguments.
Also make vacuum_set_xid_limits() output parameter symbol names match
those used by its vacuumlazy.c caller.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=TE7gW5DgSahDkf0UEZigFGAoHNNN6EvSrdzC=Kn+hrA@mail.gmail.com
The lwlock wait queue scalability issue fixed in a4adc31f69 was quite hard to
find because of the exponential backoff and because we adjust spins_per_delay
over time within a backend.
To make it easier to find similar issues in the future, add a wait event for
the pg_usleep() in perform_spin_delay(). Showing a wait event while spinning
without sleeping would increase the overhead of spinlocks, which we do not
want.
We may at some later point want to have more granular wait events, but that'd
be a substantial amount of work. This provides at least some insights into
something currently hard to observe.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
https://postgr.es/m/20221120204310.xywrhyxyytsajuuq@awork3.anarazel.de
The Hunspell project moved from Sourceforge to Github sometime
in 2016, so update our links to match the new URL. Backpatch
the doc changes to all supported versions.
Discussion: https://postgr.es/m/DC9A662A-360D-4125-A453-5A6CB9C6C4B4@yesql.se
Backpatch-through: v11
I just spent an annoying amount of time reverse-engineering the
100%-undocumented API between ts_headline and the text search
parser's prsheadline function. Add some commentary about that
while it's fresh in mind. Also remove some unused macros in
wparser_def.c.
While at it, I noticed that when commit 78e73e875 added a
CHECK_FOR_INTERRUPTS call in TS_execute_recurse, it missed
doing so in the parallel function TS_phrase_execute, which
surely needs one just as much.
Back-patch because of the missing CHECK_FOR_INTERRUPTS.
Might as well back-patch the rest of this too.
The postmaster normally sends SIGQUIT to force-terminate its
child processes after a child crash or immediate-stop request.
If that doesn't result in child exit within a few seconds,
we follow it up with SIGKILL. This patch provides GUC flags
that allow either of these signals to be replaced with SIGABRT.
On typically-configured Unix systems, that will result in a
core dump being produced for each such child. This can be
useful for debugging problems, although it's not something you'd
want to have on in production due to the risk of disk space
bloat from lots of core files.
The old postmaster -T switch, which sent SIGSTOP in place of
SIGQUIT, is changed to be the same as send_abort_for_crash.
As far as I can tell from the code comments, the intent of
that switch was just to block things for long enough to force
core dumps manually, which seems like an unnecessary extra step.
(Maybe at the time, there was no way to get most kernels to
produce core files with per-PID names, requiring manual core
file renaming after each one. But now it's surely the hard way.)
I also took the opportunity to remove the old postmaster -n
(skip shmem reinit) switch, which hasn't actually done anything
in decades, though the documentation still claimed it did.
Discussion: https://postgr.es/m/2251016.1668797294@sss.pgh.pa.us
This switch impacts 9 patterns related to a SQL-mandated special syntax
for function calls:
- LOCALTIME [ ( typmod ) ]
- LOCALTIMESTAMP [ ( typmod ) ]
- CURRENT_TIME [ ( typmod ) ]
- CURRENT_TIMESTAMP [ ( typmod ) ]
- CURRENT_DATE
Five new entries are added to pg_proc to compensate the removal of
SQLValueFunction to provide backward-compatibility and making this
change transparent for the end-user (for example for the attribute
generated when a keyword is specified in a SELECT or in a FROM clause
without an alias, or when specifying something else than an Iconst to
the parser).
The parser included a set of checks coming from the files in charge of
holding the C functions used for the SQLValueFunction calls (as of
transformSQLValueFunction()), which are now moved within each function's
execution path, so this reduces the dependencies between the execution
and the parsing steps. As of this change, all the SQL keywords use the
same paths for their work, relying only on COERCE_SQL_SYNTAX. Like
fb32748, no performance difference has been noticed, while the perf
profiles get reduced with ExecEvalSQLValueFunction() gone.
Bump catalog version.
Reviewed-by: Corey Huinker, Ted Yu
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
Until now LWLockDequeueSelf() sequentially searched the list of waiters to see
if the current proc is still is on the list of waiters, or has already been
removed. In extreme workloads, where the wait lists are very long, this leads
to a quadratic behavior. #backends iterating over a list #backends
long. Additionally, the likelihood of needing to call LWLockDequeueSelf() in
the first place also increases with the increased length of the wait queue, as
it becomes more likely that a lock is released while waiting for the wait list
lock, which is held for longer during lock release.
Due to the exponential back-off in perform_spin_delay() this is surprisingly
hard to detect. We should make that easier, e.g. by adding a wait event around
the pg_usleep() - but that's a separate patch.
The fix is simple - track whether a proc is currently waiting in the wait list
or already removed but waiting to be woken up in PGPROC->lwWaiting.
In some workloads with a lot of clients contending for a small number of
lwlocks (e.g. WALWriteLock), the fix can substantially increase throughput.
As the quadratic behavior arguably is a bug, we might want to decide to
backpatch this fix in the future.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20221027165914.2hofzp4cvutj6gin@awork3.anarazel.de
Discussion: https://postgr.es/m/CALj2ACXktNbG=K8Xi7PSqbofTZozavhaxjatVc14iYaLu4Maag@mail.gmail.com
This commit changes six SQL keywords to use COERCE_SQL_SYNTAX rather
than relying on SQLValueFunction:
- CURRENT_ROLE
- CURRENT_USER
- USER
- SESSION_USER
- CURRENT_CATALOG
- CURRENT_SCHEMA
Among the six, "user", "current_role" and "current_catalog" require
specific SQL functions to allow ruleutils.c to map them to the SQL
keywords these require when using COERCE_SQL_SYNTAX. Having
pg_proc.proname match with the keyword ensures that the compatibility
remains the same when projecting any of these keywords in a FROM clause
to an attribute name when an alias is not specified. This is covered by
the tests added in 2e0d80c, making sure that a correct mapping happens
with each SQL keyword. The three others (current_schema, session_user
and current_user) already have pg_proc entries for this job, so this
brings more consistency between the way such keywords are treated in the
parser, the executor and ruleutils.c.
SQLValueFunction is reduced to half its contents after this change,
simplifying its logic a bit as there is no need to enforce a C collation
anymore for the entries returning a name as a result. I have made a few
performance tests, with a million-ish calls to these keywords without
seeing a difference in run-time or in perf profiles
(ExecEvalSQLValueFunction() is removed from the profiles). The
remaining SQLValueFunctions are now related to timestamps and dates.
Bump catalog version.
Reviewed-by: Corey Huinker
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
Similar to how the INHERIT option controls whether or not the
permissions of the granted role are automatically available to the
grantee, the new SET permission controls whether or not the grantee
may use the SET ROLE command to assume the privileges of the granted
role.
In addition, the new SET permission controls whether or not it
is possible to transfer ownership of objects to the target role
or to create new objects owned by the target role using commands
such as CREATE DATABASE .. OWNER. We could alternatively have made
this controlled by the INHERIT option, or allow it when either
option is given. An advantage of this approach is that if you
are granted a predefined role with INHERIT TRUE, SET FALSE, you
can't go and create objects owned by that role.
The underlying theory here is that the ability to create objects
as a target role is not a privilege per se, and thus does not
depend on whether you inherit the target role's privileges. However,
it's surely something you could do anyway if you could SET ROLE
to the target role, and thus making it contingent on whether you
have that ability is reasonable.
Design review by Nathan Bossat, Wolfgang Walther, Jeff Davis,
Peter Eisentraut, and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmob+zDSRS6JXYrgq0NWdzCXuTNzT5eK54Dn2hhgt17nm8A@mail.gmail.com
Standardize on the name snapshotConflictHorizon for all XID fields from
WAL records that generate recovery conflicts when in hot standby mode.
This supersedes the previous latestRemovedXid naming convention.
The new naming convention places emphasis on how the values are actually
used by REDO routines. How the values are generated during original
execution (details of which vary by record type) is deemphasized. Users
of tools like pg_waldump can now grep for snapshotConflictHorizon to see
all potential sources of recovery conflicts in a standardized way,
without necessarily having to consider which specific record types might
be involved.
Also bring a couple of WAL record types that didn't follow any kind of
naming convention into line. These are heapam's VISIBLE record type and
SP-GiST's VACUUM_REDIRECT record type. Now every WAL record whose REDO
routine calls ResolveRecoveryConflictWithSnapshot() passes through the
snapshotConflictHorizon field from its WAL record. This is follow-up
work to the refactoring from commit 9e540599 that made FREEZE_PAGE WAL
records use a standard snapshotConflictHorizon style XID cutoff.
No bump in XLOG_PAGE_MAGIC, since the underlying format of affected WAL
records doesn't change.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wzm2CQUmViUq7Opgk=McVREHSOorYaAjR1ZpLYkRN7_dPw@mail.gmail.com
Implement a data structure that is a List of Bitmapsets, which is
essentially a 2-D boolean array except that the rows need not all
be the same width. Operations such as union and intersection are
meaningful for these, just as they are for Bitmapsets. Eventually
we might build many of the same operations that we have written for
Bitmapsets, but for the first use-case we just need a few.
That first use-case is for antijoin detection: reduce_outer_joins
needs to find the set of Vars that are certain to be non-null in a
successfully joined (not null-extended) left join row, and also
find the set of Vars subject to higher-level IS NULL constraints,
and intersect them. We had been doing this by making Lists of
the Var nodes and then using list_intersect, which works but is
pretty inefficient compared to a bitmapset-like intersection.
Potentially it's O(N^2) if there are a lot of Vars involved,
which fortunately there generally aren't; still it's not great.
Moreover, that method requires the Vars of interest to be exactly
equal() in the join condition and the upper IS NULL condition,
which is problematic for my WIP patch that labels Vars according
to which outer joins have possibly nulled them.
Discussion: https://postgr.es/m/892228.1668437838@sss.pgh.pa.us
Discussion: https://postgr.es/m/CAMbWs4-mvPPCJ1W6iK6dD5HiNwoJdi6mZp=-7mE8N9Sh+cd0tQ@mail.gmail.com
Make heapam WAL records that describe freezing performed by VACUUM more
space efficient by storing each distinct "freeze plan" once, alongside
an array of associated page offset numbers (one per freeze plan). The
freeze plans required for most heap pages tend to naturally have a great
deal of redundancy, so this technique is very effective in practice. It
often leads to freeze WAL records that are less than 20% of the size of
equivalent WAL records generated using the previous approach.
The freeze plan concept was introduced by commit 3b97e6823b, which fixed
bugs in VACUUM's handling of MultiXacts. We retain the concept of
freeze plans, but go back to using page offset number arrays. There is
no loss of generality here because deduplication is an additive process
that gets applied mechanically when FREEZE_PAGE WAL records are built.
More than anything else, freeze plan deduplication is an optimization
that reduces the marginal cost of freezing additional tuples on pages
that will need to have at least one or two tuples frozen in any case.
Ongoing work that adds page-level freezing to VACUUM will take full
advantage of the improved cost profile through batching.
Also refactor some of the details surrounding recovery conflicts needed
to REDO freeze records in passing: make original execution responsible
for generating a standard latestRemovedXid cutoff, rather than working
backwards to get the same cutoff in the REDO routine. Bugfix commit
66fbcb0d2e did it the other way around, which is equivalent but obscures
what's going on.
Also rename the cutoff field from the WAL record/struct (rename the
field cutoff_xid to latestRemovedXid to match similar WAL records).
Processing of conflicts by REDO routines is already completely uniform,
so tools like pg_waldump should present the information driving the
process uniformly. There are two remaining WAL record types that still
don't quite follow this convention (heapam's VISIBLE record type and
SP-GiST's VACUUM_REDIRECT record type). They can be brought into line
by later work that totally standardizes how the cutoffs are presented.
Bump XLOG_PAGE_MAGIC.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-Wz=XytErMnb8FAyFd+OQEbiipB0Q2FmFdXrggPL4VBnRYQ@mail.gmail.com
This adds a check on the recursion depth when including authentication
configuration files, something that has never been done when processing
'@' files for database and user name lists in pg_hba.conf. On HEAD,
this was leading to a rather confusing error, as of:
FATAL: exceeded maxAllocatedDescs (NN) while trying to open file "/path/blah.conf"
This refactors the code so as the error reported is now the following,
which is the same as for GUCs:
FATAL: could not open file "/path/blah.conf": maximum nesting depth exceeded
This reduces a bit the verbosity of the error message used for files
included in user and database lists, reporting only the file name of
what's failing to load, without mentioning the relative or absolute path
specified after '@' in a HBA file. The absolute path is built upon what
'@' defines anyway, so there is no actual loss of information. This
makes the future inclusion logic much simpler. A follow-up patch will
add an error context to be able to track on which line of which file the
inclusion is failing, to close the loop, providing all the information
needed to know the full chain of events.
This logic has been extracted from a larger patch written by Julien,
rewritten by me to have a unique code path calling AllocateFile() on
authentication files, and is useful on its own. This new interface
will be used later for authentication files included with
@include[_dir,_if_exists], in a follow-up patch.
Author: Michael Paquier, Julien Rouhaud
Discussion: https://www.postgresql.org/message-id/Y2xUBJ+S+Z0zbxRW@paquier.xyz
Add a NodeTag field to struct Bitmapset. This is free because of
alignment considerations on 64-bit hardware. While it adds some
space on 32-bit machines, we aren't optimizing for that case anymore.
The advantage is that data structures such as Lists of Bitmapsets
are now first-class objects to the Node infrastructure, and don't
require special-case code to handle.
This patch includes removal of one such special case, in indxpath.c:
bms_equal_any() can now be replaced by list_member(). There may be
more existing code that could be simplified, but I didn't look very
hard. We also get to drop the read_write_ignore annotations on a
couple of RelOptInfo fields.
The outfuncs/readfuncs support is arranged so that nothing changes
in the string representation of a Bitmapset field; therefore, this
doesn't need a catversion bump.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/109089.1668197158@sss.pgh.pa.us
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
It's safe to mark this as immutable, because it does not depend
on the timezone GUC setting. Oversight in commit 600b04d6b.
(There's an argument that timezone definitions do change from
time to time, but we have not worried about that in marking
other timestamp-related functions; for example AT TIME ZONE
has always been considered immutable. The situation is no
worse than our problems with time-varying locales, surely.)
Przemysław Sztoch
Discussion: https://postgr.es/m/eaa3fabe-50fc-bbe8-b096-ce62ddadab85@sztoch.pl
This routine is designed to write zeros to a file using vectored I/O,
for a size given by its caller, being useful when it comes to
initializing a file with a final size already known.
XLogFileInitInternal() in xlog.c is changed to use this new routine when
initializing WAL segments with zeros (wal_init_zero enabled). Note that
the aligned buffers used for the vectored I/O writes have a size of
XLOG_BLCKSZ, and not BLCKSZ anymore, as pg_pwrite_zeros() relies on
PGAlignedBlock while xlog.c originally used PGAlignedXLogBlock.
This routine will be used in a follow-up patch to do the pre-padding of
WAL segments for pg_receivewal and pg_basebackup when these are not
compressed.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://www.postgresql.org/message-id/CALj2ACUq7nAb7%3DbJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA%40mail.gmail.com
The code in charge of listing and classifying a set of configuration
files in a directory was located in guc-file.l, being used currently for
GUCs under "include_dir". This code is planned to be used for an
upcoming feature able to include configuration files for ident and HBA
files from a directory, similarly to GUCs. In both cases, the file
names, suffixed by ".conf", have to be ordered alphabetically. This
logic is moved to a new file, called conffiles.c, so as it is easier to
share this facility between GUCs and the HBA/ident parsing logic.
Author: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/Y2IgaH5YzIq2b+iR@paquier.xyz
Commit aa0105141 repeated one of the oldest mistakes in our book:
thinking that OID is the same as int32. It isn't of course, and
unsurprisingly the first person who came along with a database
OID above 2 billion broke it. Repair.
Per bug #17677 from Sergey Pankov. Back-patch to v15.
Discussion: https://postgr.es/m/17677-a99fa067d7ed71c9@postgresql.org
Casting the result of palloc etc. to the intended type is more per
project style anyway.
(The fact that cpluspluscheck doesn't notice these problems is
because it doesn't expand any macros, which seems like a troubling
shortcoming. Don't have a good idea about improving that.)
Back-patch to v13, which is as far as the patch applies cleanly;
doesn't seem worth working harder.
David Geier
Discussion: https://postgr.es/m/aa5d88a3-71f4-3455-11cf-82de0372c941@gmail.com
If we have no special-case code in s_lock.h for the current platform,
but the compiler has __sync_lock_test_and_set, use that instead of
failing. It's unlikely that anybody's __sync_lock_test_and_set
would be so awful as to be worse than our semaphore-based fallback,
but if it is, they can (continue to) use --disable-spinlocks.
This allows removal of the RISC-V special case installed by commit
c32fcac56, which generated exactly the same code but only on that
platform. Usefully, the RISC-V buildfarm animals should now test
at least the int variant of this patch.
I've manually tested both variants on ARM by dint of removing the
ARM-specific stanza. We don't want to drop that, because it already
has some special knowledge and is likely to grow more over time.
Likewise, this is not meant to preclude installing special cases
for other arches if that proves worthwhile.
Per discussion of a request to install the same code for loongarch64.
Like the previous patch, we might as well back-patch to supported
branches.
Discussion: https://postgr.es/m/761ac43d44b84d679ba803c2bd947cc0@HSMAILSVR04.hs.handsome.com.cn
We have various requirements when using a dlist_head to keep track of the
number of items in the list. This, traditionally, has been done by
maintaining a counter variable in the calling code. Here we tidy this up
by adding "dclist", which is very similar to dlist but also keeps track of
the number of items stored in the list.
Callers may use the new dclist_count() function when they need to know how
many items are stored. Obtaining the count is an O(1) operation.
For simplicity reasons, dclist and dlist both use dlist_node as their node
type and dlist_iter/dlist_mutable_iter as their iterator type. dclists
have all of the same functionality as dlists except there is no function
named dclist_delete(). To remove an item from a list dclist_delete_from()
must be used. This requires knowing which dclist the given item is stored
in.
Additionally, here we also convert some dlists where additional code
exists to keep track of the number of items stored and to make these use
dclists instead.
Author: David Rowley
Reviewed-by: Bharath Rupireddy, Aleksander Alekseev
Discussion: https://postgr.es/m/CAApHDvrtVxr+FXEX0VbViCFKDGxA3tWDgw9oFewNXCJMmwLjLg@mail.gmail.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
Here we add a new 'copy' parameter to tuplesort_getdatum so that we can
instruct the function not to datumCopy() byref Datums before returning.
Similar to 91e9e89dc, this can provide significant performance
improvements in nodeSort when sorting by a single byref column and the
sort's targetlist contains only that column.
This allows us to re-enable Datum sorts for byref types which was disabled
in 3a5817695 due to a reported memory leak.
Additionally, here we slightly optimize DISTINCT aggregates so that we no
longer perform any datumCopy() when we find the current value not to be
distinct from the previous value. Previously the code would always take a
copy of the most recent Datum and pfree the previous value, even when the
values were the same. Testing shows a small but noticeable performance
increase when aggregate transitions are skipped due to the current
transition value being the same as the prior one.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqS6wC5U==k9Hd26E4EQXH3QR67-T4=Q1rQ36NGvjfVSg@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvqHonfe9G1cVaKeHbDx70R_zCrM3qP2AGXpGrieSKGnhA@mail.gmail.com
This commit moves pg_pwritev_with_retry(), a convenience wrapper of
pg_writev() able to handle partial writes, to common/file_utils.c so
that the frontend code is able to use it. A first use-case targetted
for this routine is pg_basebackup and pg_receivewal, for the
zero-padding of a newly-initialized WAL segment. This is used currently
in the backend when the GUC wal_init_zero is enabled (default).
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Thomas Munro
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
These numbers are strictly-monotone identifiers assigned to each rule
of pg_hba_file_rules and each map of pg_ident_file_mappings when loading
the HBA and ident configuration files, indicating the order in which
they are checked at authentication time, until a match is found.
With only one file loaded currently, this is equivalent to the line
numbers assigned to the entries loaded if one wants to know their order,
but this becomes mandatory once the inclusion of external files is
added to the HBA and ident files to be able to know in which order the
rules and/or maps are applied at authentication. Note that NULL is used
when a HBA or ident entry cannot be parsed or validated, aka when an
error exists, contrary to the line number.
Bump catalog version.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
This has the advantage to limit the presence of the GUC values
hba_file and ident_file to the code paths where these files are loaded,
easing the introduction of an upcoming feature aimed at adding inclusion
logic for files and directories in HBA and ident files.
Note that this needs the addition of the source file name to HbaLine, in
addition to the line number, which is something needed by the backend in
two places of auth.c (authentication failure details and auth_id log
when log_connections is enabled).
While on it, adjust a log generated on authentication failure to report
the name of the actual HBA file on which the connection attempt matched,
where the line number and the raw line written in the HBA file were
already included. This was previously hardcoded as pg_hba.conf, which
would be incorrect when a custom value is used at postmaster startup for
the GUC hba_file.
Extracted from a larger patch by the same author.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
Specifically, when pg_basebackup is invoked with -Tx=y, don't error
out if x could plausibly be an absolute path either on Windows or on
non-Windows systems. We don't know whether the remote system is
running the same OS as the local system, so it's not appropriate to
assume that our local rule about absolute pathnames is the same as
the rule on the remote system.
Patch by me, reviewed by Tom Lane, Andrew Dunstan, and
Davinder Singh.
Discussion: http://postgr.es/m/CA+TgmoY+jC3YiskomvYKDPK3FbrmsDU7_8+wMHt02HOdJeRb0g@mail.gmail.com
AuthToken gains a regular expression, and IdentLine is changed so as it
uses an AuthToken rather than tracking separately the ident user string
used for the regex compilation and its generated regex_t. In the case
of pg_ident.conf, a set of AuthTokens is built in the pre-parsing phase
of the file, and an extra regular expression is compiled when building
the list of IdentLines, after checking the sanity of the fields in a
pre-parsed entry.
The logic in charge of computing and executing regular expressions is
now done in a new set of routines called respectively
regcomp_auth_token() and regexec_auth_token() that are wrappers around
pg_regcomp() and pg_regexec(), working on AuthTokens. While on it, this
patch adds a routine able to free an AuthToken, free_auth_token(), to
simplify a bit the logic around the requirement of using a specific free
routine for computed regular expressions. Note that there are no
functional or behavior changes introduced by this commit.
The goal of this patch is to ease the use of regular expressions with
more items of pg_hba.conf (user list, database list, potentially
hostnames) where AuthTokens are used extensively. This will be tackled
later in a separate patch.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
These routines have been renamed in a19e5ce. There is no need to keep
the compatibility declarations on HEAD, as once an extension moves to
the new routine name when compiling with v16~ the code would work the
same way when recompiled on v15. No backpatch to v15 for this one,
because ABI compatibility has to be maintained there.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
When creating a cast that uses a conversion function, we've
historically allowed the input and result types to be
binary-compatible with the function's input and result types,
rather than necessarily being identical. This means that the new
cast is logically dependent on the binary-compatible cast or casts
that it references: if those are defined by pg_cast entries, and you
try to restore the new cast without having defined them, it'll fail.
Hence, we should make pg_depend entries to record these dependencies
so that pg_dump knows that there is an ordering requirement.
This is not the only place where we allow such shortcuts; aggregate
functions for example are similarly lax, and in principle should gain
similar dependencies. However, for now it seems sufficient to fix
the cast-versus-cast case, as pg_dump's other ordering heuristics
should keep it out of trouble for other object types.
Per report from David Turoň; thanks also to Robert Haas for
preliminary investigation. I considered back-patching, but
seeing that this issue has existed for many years without
previous reports, it's not clear it's worth the trouble.
Moreover, back-patching wouldn't be enough to ensure that the
new pg_depend entries exist in existing databases anyway.
Discussion: https://postgr.es/m/OF0A160F3E.578B15D1-ONC12588DA.003E4857-C12588DA.0045A428@notes.linuxbox.cz
In the latest version of Apple's macOS SDK, <sys/socket.h>
fails to compile if "REF" is #define'd as something.
Apple may or may not agree that this is a bug, and even if
they do accept the bug report I filed, they probably won't
fix it very quickly. In the meantime, our back branches will all
fail to compile gram.y. v15 and HEAD currently escape the problem
thanks to the refactoring done in 98e93a1fc, but that's purely
accidental. Moreover, since that patch removed a widely-visible
inclusion of <netdb.h>, back-patching it seems too likely to break
third-party code.
Instead, change the token's code name to REF_P, following our usual
convention for naming parser tokens that are likely to have symbol
conflicts. The effects of that should be localized to the grammar
and immediately surrounding files, so it seems like a safer answer.
Per project policy that we want to keep recently-out-of-support
branches buildable on modern systems, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/1803927.1665938411@sss.pgh.pa.us
It can be useful to know when a relation has last been used, e.g., when
evaluating whether an index is still required. It was already possible to
infer the time of the last usage by tracking, e.g.,
pg_stat_all_indexes.idx_scan over time. But far from everybody does so.
To make it easier to detect the last time a relation has been scanned, track
that time in each relation's pgstat entry. To minimize overhead a) the
timestamp is updated only when the backend pending stats entry is flushed to
shared stats b) the last transaction's stop timestamp is used as the
timestamp.
Bumps catalog and stats format versions.
Author: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/CA+OCxozrVHNFVEPkweUHMZje+t1tfY816d9MZYc6eZwOOusOaQ@mail.gmail.com
The previous patch made addition of new GUCs cheap, but other GUC
operations aren't improved and indeed get a bit slower, because
hash_seq_search() is slower than just scanning a pointer array.
However, most performance-critical GUC operations only need
to touch a relatively small fraction of the GUCs; especially
so for AtEOXact_GUC(). We can improve matters at the cost
of a bit more space by adding dlist or slist links to the
GUC data structures. This patch invents lists that track
(1) all GUCs with non-default "source";
(2) all GUCs with nonempty state stack (implying they've
been changed in the current transaction);
(3) all GUCs due for reporting to the client.
All of guc.c's performance-critical cases can make use of one or
another of these lists to avoid searching the whole hash table.
In particular, the stack list means that transaction end
doesn't take time proportional to the number of GUCs, but
only to the number changed in the current transaction.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
This gets rid of bsearch() in favor of hashed lookup. The main
advantage is that it becomes far cheaper to add new GUCs, since
we needn't re-sort the pointer array. Adding N new GUCs had
been O(N^2 log N), but now it's closer to O(N). We need to
sort only in SHOW ALL and equivalent functions, which are
hopefully not performance-critical to anybody.
Also, merge GetNumConfigOptions() into get_guc_variables(),
because in a world where the set of GUCs isn't fairly static
you really want to consider those two results as tied together
not independent.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
The only real argument for using malloc directly was that we needed
the ability to not throw error on OOM; but mcxt.c grew that feature
awhile ago.
Keeping the data in a memory context improves accountability and
debuggability --- for example, without this it's almost impossible
to detect memory leaks in the GUC code with anything less costly
than valgrind. Moreover, the next patch in this series will add a
hash table for GUC lookup, and it'd be pretty silly to be using
palloc-dependent hash facilities alongside malloc'd storage of the
underlying data.
This is a bit invasive though, in particular causing an API break
for GUC check hooks that want to modify the GUC's value or use an
"extra" data structure. They must now use guc_malloc() and
guc_free() instead of malloc() and free(). Failure to change
affected code will result in assertion failures or worse; but
thanks to recent effort in the mcxt infrastructure, it shouldn't
be too hard to diagnose such oversights (at least in assert-enabled
builds).
One note is that this changes ParseLongOption() to return short-lived
palloc'd not malloc'd data. There wasn't any caller for which the
previous definition was better.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
We lack a version of repalloc() that supports MCXT_ALLOC_NO_OOM
semantics, so invent repalloc_extended() with the usual set of
flags. repalloc_huge() becomes a legacy wrapper for that.
Also, fix dynahash.c so that it can support HASH_ENTER_NULL
requests when using the default palloc-based allocator.
The only reason it didn't do that already was the lack of the
MCXT_ALLOC_NO_OOM option when that code was written, ages ago.
While here, simplify a few overcomplicated tests in mcxt.c.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
Commit 3d956d956 allowed the COPY, but it's done by inserting individual
rows to the foreign table, so it can be inefficient due to the overhead
caused by each round-trip to the foreign server. To improve performance
of the COPY in such a case, this patch allows batch insertion, by
extending the multi-insert machinery in CopyFrom() to the foreign-table
case so that we insert multiple rows to the foreign table at once using
the FDW callback routine added by commit b663a4136. This patch also
allows this for postgres_fdw. It is enabled by the "batch_size" option
added by commit b663a4136, which is disabled by default.
When doing batch insertion, we update progress of the COPY command after
performing the FDW callback routine, to count rows not suppressed by the
FDW as well as a BEFORE ROW INSERT trigger. For consistency, this patch
changes the timing of updating it for plain tables: previously, we
updated it immediately after adding each row to the multi-insert buffer,
but we do so only after writing the rows stored in the buffer out to the
table using table_multi_insert(), which I think would be consistent even
with non-batching mode, because in that mode we update it after writing
each row out to the table using table_tuple_insert().
Andrey Lepikhov, heavily revised by me, with review from Ian Barwick,
Andrey Lepikhov, and Zhihong Yu.
Discussion: https://postgr.es/m/bc489202-9855-7550-d64c-ad2d83c24867%40postgrespro.ru
This file needs xlogreader.h only for the XLogReaderState typedef; but
we can dodge that by forward-declaring it. Many files use xlog.h for
reasons other than reading WAL, and it's not good to force all those
files to include xlogreader.h, so take it out.
Surprisingly, there is no fallout in core code from making this change.
Perhaps external code will have to start including xlogreader.h.
Make a common replication origin name formatting function to replace
multiple snprintf() expressions. This also includes logic previously done
by ReplicationOriginNameForTablesync().
This makes the code to generate the origin name consistent among apply
worker and tablesync worker.
Author: Peter Smith
Reviewed-By: Aleksander Alekseev
Discussion: https://postgr.es/m/CAHut%2BPsa8hhfSE6ozUK-ih7GkQziAVAf4f3bqiXEj2nQiu-43g%40mail.gmail.com
This is useful as a way for extensions to process COPY TO rows in the
way they see fit (say auditing, analytics, backend, etc.) without the
need to invoke an external process running as the OS user running the
backend through PROGRAM that requires superuser rights. COPY FROM
already provides a similar callback for logical replication. For COPY
TO, the callback is triggered when we are ready to send a row in
CopySendEndOfRow(), which is the same code path as when sending a row
to a frontend or a pipe/file.
A small test module, test_copy_callbacks, is added to provide some
coverage for this facility.
Author: Bilva Sanaba, Nathan Bossart
Discussion: https://postgr.es/m/253C21D1-FCEB-41D9-A2AF-E6517015B7D7@amazon.com
Remove the Trap and TrapMacro macros, which were nearly unused
and confusingly had the opposite condition polarity from the
otherwise-functionally-equivalent Assert macros.
Having done that, it's very hard to justify carrying the errorType
argument of ExceptionalCondition, so drop that too, and just
let it assume everything's an Assert. This saves about 64K
of code space as of current HEAD.
Discussion: https://postgr.es/m/3928703.1665345117@sss.pgh.pa.us
Instead of Abs() for int64, use the C standard functions labs() or
llabs() as appropriate. Define a small wrapper around them that
matches our definition of int64. (labs() is C90, llabs() is C99.)
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4beb42b5-216b-bce8-d452-d924d5794c63%40enterprisedb.com
Previously PgStat_StatReplSlotEntry contained the slotname, which was mainly
used when writing out the stats during shutdown, to identify the slot in the
serialized data (at runtime the index in ReplicationSlotCtl->replication_slots
is used, but that can change during a restart). Unfortunately the slotname was
overwritten when the slot's stats were reset.
That turned out to only cause "real" problems if the slot was active during
the reset, triggering an assertion failure at the next
pgstat_report_replslot(). In other paths the stats were re-initialized during
pgstat_acquire_replslot().
Fix this by removing slotname from PgStat_StatReplSlotEntry. Instead we can
get the slot's name from the slot itself. Besides fixing a bug, this also is
architecturally cleaner (a name is not really statistics). This is safe
because stats, for a slot removed while shut down, will not be restored at
startup.
In 15 the slotname is not removed, but renamed, to avoid changing the stats
format. In master, bump PGSTAT_FILE_FORMAT_ID.
This commit does not contain a test for the fix. I think this can only be
tested by a tap test starting pg_recvlogical in the background and checking
pg_recvlogical's output. That type of test is notoriously hard to be reliable,
so committing it shortly before the release is wrapped seems like a bad idea.
Reported-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/YxfagaTXUNa9ggLb@ahch-to
Backpatch: 15-, where the bug was introduced in 5891c7a8ed
Commit c6e0fe1f2 was a shade too trusting that any pointer passed
to pfree, repalloc, etc will point at a valid chunk. Notably,
passing a pointer that was actually obtained from malloc tended
to result in obscure assertion failures, if not worse. (On FreeBSD
I've seen such mistakes take down the entire cluster, seemingly as
a result of clobbering shared memory.)
To improve matters, extend the mcxt_methods[] array so that it
has entries for every possible MemoryContextMethodID bit-pattern,
with the currently unassigned ID codes pointing to error-reporting
functions. Then, fiddle with the ID assignments so that patterns
likely to be associated with bad pointers aren't valid ID codes.
In particular, we should avoid assigning bit patterns 000 (zeroed
memory) and 111 (wipe_mem'd memory).
It turns out that on glibc (Linux), malloc uses chunk headers that
have flag bits in the same place we keep MemoryContextMethodID,
and that the bit patterns 000, 001, 010 are the only ones we'll
see as long as the backend isn't threaded. So we can have very
robust detection of pfree'ing a malloc-assigned block on that
platform, at least so long as we can refrain from using up those
ID codes. On other platforms, we don't have such a good guarantee,
but keeping 000 reserved will be enough to catch many such cases.
While here, make GetMemoryChunkMethodID() local to mcxt.c, as there
seems no need for it to be exposed even in memutils_internal.h.
Patch by me, with suggestions from Andres Freund and David Rowley.
Discussion: https://postgr.es/m/2910981.1665080361@sss.pgh.pa.us
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
MemoryContextContains is no longer reliable in the wake of c6e0fe1f2,
because there's no longer very much redundancy in chunk headers.
(It wasn't *completely* reliable even before that, as there was a
chance of a false positive if you passed it something that didn't
point to an mcxt chunk at all. But it was generally good enough.)
Hence, remove it. There is no remaining core code that requires it.
Extensions that have been using it might be able to substitute a
test like "GetMemoryChunkContext(ptr) == context", recognizing that
this explicitly requires that the pointer point to some chunk.
Tom Lane and David Rowley
Discussion: https://postgr.es/m/1913788.1664898906@sss.pgh.pa.us
ts_locale.c omitted support for "isalnum" tests, perhaps on the
grounds that there were initially no use-cases for that. However,
both ltree and pg_trgm need such tests, and we do also have one
use-case now in the core backend. The workaround of testing
isalpha and isdigit separately seems quite inefficient, especially
when dealing with multibyte characters; so let's fill in the
missing support.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
This optional parameter can be specified in cases where there are nested
PG_TRY() statements within a function in order to stop the compiler from
issuing warnings about shadowed local variables when compiling with
-Wshadow. The optional parameter is used as a suffix on the variable
names declared within the PG_TRY(), PG_CATCH(), PG_FINALLY() and
PG_END_TRY() macros. The parameter, if specified, must be the same in
each component macro of the given PG_TRY() block.
This also adjusts the single case where we have nested PG_TRY() statements
to add a parameter to the inner-most PG_TRY().
This reduces the number of compiler warnings when compiling with
-Wshadow=compatible-local from 5 down to 1.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqWGMdB_pATeUqE=JCtNqNxObPOJ00jFEa2_sZ20j_Wvg@mail.gmail.com
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
Up to now, the ID values returned by pg_stat_get_backend_idset() and
used by pg_stat_get_backend_activity() and allied functions were just
indexes into a local array of sessions seen by the last stats refresh.
This is problematic for a few reasons. The "ID" of a session can vary
over its existence, which is surprising. Also, while these numbers
often match the "backend ID" used for purposes like temp schema
assignment, that isn't reliably true. We can fairly cheaply switch
things around to make these numbers actually be the sessions' backend
IDs. The added test case illustrates that with this definition, the
temp schema used by a given session can be obtained given its PID.
While here, delete some dead code that guarded against getting
a NULL return from pgstat_fetch_stat_local_beentry(). That can't
happen as long as the caller is careful to pass an in-range array
index, as all the callers are. (This code may not have been dead
when written, but it surely is now.)
Nathan Bossart
Discussion: https://postgr.es/m/20220815205811.GA250990@nathanxps13
SYSTEM_USER is a reserved keyword of the SQL specification that,
roughly described, is aimed at reporting some information about the
system user who has connected to the database server. It may include
implementation-specific information about the means by the user
connected, like an authentication method.
This commit implements SYSTEM_USER as of auth_method:identity, where
"auth_method" is a keyword about the authentication method used to log
into the server (like peer, md5, scram-sha-256, gss, etc.) and
"identity" is the authentication identity as introduced by 9afffcb (peer
sets authn to the OS user name, gss to the user principal, etc.). This
format has been suggested by Tom Lane.
Note that thanks to d951052, SYSTEM_USER is available to parallel
workers.
Bump catalog version.
Author: Bertrand Drouvot
Reviewed-by: Jacob Champion, Joe Conway, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/7e692b8c-0b11-45db-1cad-3afc5b57409f@amazon.com
We'd like to use precompiled headers on windows to reduce compile times. Right
now we rely on defining UMDF_USING_NTSTATUS before including postgres.h in a few
select places - which doesn't work with precompiled headers. Instead define
it globally.
When UMDF_USING_NTSTATUS is defined we need to explicitly include ntstatus.h,
winternl.h to get a comparable set of symbols. Right now these includes would
be required in a number of non-platform-specific .c files - to avoid that,
include them in win32_port.h. Based on my measurements that doesn't increase
compile times measurably.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220927011951.j3h4o7n6bhf7dwau@awork3.anarazel.de
Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
SharedInvalSmgrMsg can't require 8-byte alignment, because then
SharedInvalidationMessage will require 8-byte alignment, which will
then cause ParseCommitRecord to fail on machines that are picky
about alignment, because it assumes that everything that gets
packed into a commit record requires only 4-byte alignment.
Another problem with 05d4cbf9b6.
Discussion: http://postgr.es/m/3825454.1664310917@sss.pgh.pa.us
The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
For the *GetDatumFast() macros, converting to an inline function
doesn't work in the !USE_FLOAT8_BYVAL case, but we can use
AssertVariableIsOfTypeMacro() to get a similar level of type checking.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Previously, these were declared in postgres_ext.h, but they are not
needed nearly so widely as the OID declarations, so that doesn't
necessarily make sense. Also, because postgres_ext.h is included
before most of c.h has been processed, the previous location creates
some problems for a pending patch.
Patch by me, reviewed by Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoYc8oevMqRokZQ4y_6aRn-7XQny1JBr5DyWR_jiFtONHw@mail.gmail.com
Push the units fields over to the left so that all the single-bit
flags can be together. I considered rearranging the single-bit
flags to try to group flags with similar purposes, but eventually
decided that that involved too many judgment calls.
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
Previously, the transaction-property GUCs such as transaction_isolation
could be reset after starting a transaction, because we marked them
as GUC_NO_RESET_ALL but still allowed a targeted RESET. That leads to
assertion failures or worse, because those properties aren't supposed
to change after we've acquired a transaction snapshot.
There are some NO_RESET_ALL variables for which RESET is okay, so
we can't just redefine the semantics of that flag. Instead introduce
a separate GUC_NO_RESET flag. Mark "seed", as well as the transaction
property GUCs, as GUC_NO_RESET.
We have to disallow GUC_ACTION_SAVE as well as straight RESET, because
otherwise a function having a "SET transaction_isolation" clause can
still break things: the end-of-function restore action is equivalent
to a RESET.
No back-patch, as it's conceivable that someone is doing something
this patch will forbid (like resetting one of these GUCs at transaction
start, or "CREATE FUNCTION ... SET transaction_read_only = 1") and not
running into problems with it today. Given how long we've had this
issue and not noticed, the side effects in non-assert builds can't be
too serious.
Per bug #17385 from Andrew Bille.
Masahiko Sawada
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
This was used as the returned result type of the generated contents for
the backup_label and backup history files. This is replaced by a simple
string, reducing the cleanup burden of all the callers of
build_backup_content().
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/YzERvNPaZivHEKZJ@paquier.xyz
This change simplifies some of the logic related to the generation and
creation of the backup_label and backup history files, which has become
unnecessarily complicated since the removal of the exclusive backup mode
in commit 39969e2. The code was previously generating the contents of
these files as a string (start phase for the backup_label and stop phase
for the backup history file), one problem being that the contents of the
backup_label string were scanned to grab some of its internal contents
at the stop phase.
This commit changes the logic so as we store the data required to build
these files in an intermediate structure named BackupState. The
backup_label file and backup history file strings are generated when
they are ready to be sent back to the client. Both files are now
generated with the same code path. While on it, this commit renames
some variables for clarity.
Two new files named xlogbackup.{c,h} are introduced in this commit, to
remove from xlog.c some of the logic around base backups. Note that
more could be moved to this new set of files.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXWwTDgJqCjdaPyfR7djwm6SrybGcrZyrvojzcsmt4FFw@mail.gmail.com
The node types A_Const, Constraint, and A_Expr had custom output
functions, but no read functions were implemented so far.
The A_Expr output format had to be tweaked a bit to make it easier to
parse.
Be a bit more cautious about applying strncmp to unterminated strings.
Also error out if an unrecognized enum value is found in each case,
instead of just printing a placeholder value. That was maybe ok for
debugging but won't work if we want to have robust round-tripping.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Make sure that function declarations use names that exactly match the
corresponding names from function definitions for several "lexer
adjacent" backend functions.
These functions were missed by recent commits because they were obscured
by clang-tidy warnings about functions whose signature is directly under
the control of the lexer (flex seems to always generate function
declarations with unnamed parameters). We probably can't fix most of
the warnings it generates for translation units that get built from .l
and .y files, but we can at least do this much.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Previously the following snprintf() wrappers:
* ReplicationSlotNameForTablesync()
* ReplicationOriginNameForTablesync()
... used int as a second argument of snprintf() while the actual type of it
is size_t. Although it doesn't fail at present better replace it with Size
for consistency with the rest of the system.
Author: Aleksander Alekseev
Reviewed-By: Peter Smith
Discussion: https://postgr.es/m/CAHut%2BPsa8hhfSE6ozUK-ih7GkQziAVAf4f3bqiXEj2nQiu-43g%40mail.gmail.com
Visual Studio 2015+ has support for a macro to control the alignement of
structures as of __declspec(align(#)), and this commit adds a definition
of pg_attribute_aligned() based on that. It happens that this was
already used in the implementation of atomics for MSVC. Note that there
is still no definition fo pg_attribute_packed(), so this does not impact
itemptr.h.
Author: James Coleman
Discussion: https://postgr.es/m/CAAaqYe-HbtZvR3msoMtk+hYW2S0e0OapzMW8icSMYTMA+mN8Aw@mail.gmail.com
expression_tree_walker and allied functions have traditionally
declared their callback functions as, say, "bool (*walker) ()"
to allow for variation in the declared types of the callback
functions' context argument. This is apparently going to be
forbidden by the next version of the C standard, and the latest
version of clang warns about that. In any case it's always
been pretty poor for error-detection purposes, so fixing it is
a good thing to do.
What we want to do is change the callback argument declarations to
be like "bool (*walker) (Node *node, void *context)", which is
correct so far as expression_tree_walker and friends are concerned,
but not change the actual callback functions. Strict compliance with
the C standard would require changing them to declare their arguments
as "void *context" and then cast to the appropriate context struct
type internally. That'd be very invasive and it would also introduce
a bunch of opportunities for future bugs, since we'd no longer have
any check that the correct sort of context object is passed by outside
callers or internal recursion cases. Therefore, we're just going
to ignore the standard's position that "void *" isn't necessarily
compatible with struct pointers. No machine built in the last forty
or so years actually behaves that way, so it's not worth introducing
bug hazards for compatibility with long-dead hardware.
Therefore, to silence these compiler warnings, introduce a layer of
macro wrappers that cast the supplied function name to the official
argument type. Thanks to our use of -Wcast-function-type, this will
still produce a warning if the supplied function is seriously
incompatible with the required signature, without going as far as
the official spec restriction does.
This method fixes the problem without any need for source code changes
outside nodeFuncs.h/.c. However, it is an ABI break because the
physically called functions now have names ending in "_impl". Hence
we can only fix it this way in HEAD. In the back branches, we'll have
to settle for disabling -Wdeprecated-non-prototype.
Discussion: https://postgr.es/m/CA+hUKGKpHPDTv67Y+s6yiC8KH5OXeDg6a-twWo_xznKTcG0kSA@mail.gmail.com
Fix selfuncs.h cpluspluscheck complaint, without reintroducing a
parameter name inconsistency (restore the original declaration names,
and then make corresponding function definitions consistent with that).
Oversight in commit a601366a.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andres Freund <andres@anarazel.de>
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions. Having parameter names
that are reliably consistent in this way will make it easier to reason
about groups of related C functions from the same translation unit as a
module. It will also make certain refactoring tasks easier.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Make regex code consistently use named parameters in function
declarations. Also make sure that parameter names from each function's
declaration match corresponding definition parameter names.
This makes Henry Spencer's regex code follow Postgres coding standards.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
The API contract for planstate_tree_walker() callbacks is that they
take a PlanState pointer and a context pointer. Somebody figured
they could save a couple lines of code by ignoring that, and passing
ExecShutdownNode itself as the walker even though it has but one
argument. Somewhat remarkably, we've gotten away with that so far.
However, it seems clear that the upcoming C2x standard means to
forbid such cases, and compilers that actively break such code
likely won't be far behind. So spend the extra few lines of code
to do it honestly with a separate walker function.
In HEAD, we might as well go further and remove ExecShutdownNode's
useless return value. I left that as-is in back branches though,
to forestall complaints about ABI breakage.
Back-patch, with the thought that this might become of practical
importance before our stable branches are all out of service.
It doesn't seem to be fixing any live bug on any currently known
platform, however.
Discussion: https://postgr.es/m/208054.1663534665@sss.pgh.pa.us
Make reorderbuffer.h function declarations consistently use named
parameters. Also make sure that the declarations use names that match
corresponding names from function definitions in reorderbuffer.c. This
makes the definitions easier to follow, especially in the case of
functions that happen to have adjoining arguments of the same type.
This patch was written with help from clang-tidy. Specifically, its
"readability-inconsistent-declaration-parameter-name" check and its
"readability-named-parameter" check were used.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/3955318.1663377656@sss.pgh.pa.us
The function has a bool argument named "case_insensitive", but that was
spelled "case_sensitive" in the declaration. Make them consistent now
to avoid confusion in the future.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Michael Paquiër <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Backpatch: 10-
For some reason we'd never decorated pg_v*printf() with
pg_attribute_printf() annotations. There is a convention for
how to label va_list-using printf functions (write zero for the
second argument), and we use that liberally elsewhere in the
code, but these core functions lacked it. It's not clear how
much useful checking the compiler can do for calls of these,
but we might as well add the annotations.
Also, sync win32security.c's log_error() with our normal convention
that pg_attribute_printf must be attached to a function's declaration
not definition. Apparently this file is only compiled with compilers
that aren't picky about that, but still it'd be better to be
consistent.
No back-patch since there's little reason to think we would catch
anything.
Discussion: https://postgr.es/m/3492412.1663283395@sss.pgh.pa.us
Various bits of code were declaring signal handlers manually,
using "int signum" or variants of that. We evidently have no
platforms where that's actually wrong, but let's use our
SIGNAL_ARGS macro everywhere anyway. If nothing else, it's
good for finding signal handlers easily.
No need for back-patch, since this is just cosmetic AFAICS.
Discussion: https://postgr.es/m/2684964.1663167995@sss.pgh.pa.us
This header is semi-private, being used only in files related to
raw parsing, so move to the backend directory where those files
live. This allows removal of Makefile rules that symlink gram.h to
src/include/parser, since gramparse.h can now include gram.h from
within the same directory. This has the side-effect of no longer
installing gram.h and gramparse.h, but there doesn't seem to be a
good reason to continue doing so.
Per suggestion from Andres Freund and Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/20220904181759.px6uosll6zbxcum5%40awork3.anarazel.de
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
guc.c has grown to be one of our largest .c files, making it
a bottleneck for compilation. It's also acquired a bunch of
knowledge that'd be better kept elsewhere, because of our not
very good habit of putting variable-specific check hooks here.
Hence, split it up along these lines:
* guc.c itself retains just the core GUC housekeeping mechanisms.
* New file guc_funcs.c contains the SET/SHOW interfaces and some
SQL-accessible functions for GUC manipulation.
* New file guc_tables.c contains the data arrays that define the
built-in GUC variables, along with some already-exported constant
tables.
* GUC check/assign/show hook functions are moved to the variable's
home module, whenever that's clearly identifiable. A few hard-
to-classify hooks ended up in commands/variable.c, which was
already a home for miscellaneous GUC hook functions.
To avoid cluttering a lot more header files with #include "guc.h",
I also invented a new header file utils/guc_hooks.h and put all
the GUC hook functions' declarations there, regardless of their
originating module. That allowed removal of #include "guc.h"
from some existing headers. The fallout from that (hopefully
all caught here) demonstrates clearly why such inclusions are
best minimized: there are a lot of files that, for example,
were getting array.h at two or more levels of remove, despite
not having any connection at all to GUCs in themselves.
There is some very minor code beautification here, such as
renaming a couple of inconsistently-named hook functions
and improving some comments. But mostly this just moves
code from point A to point B and deals with the ensuing
needs for #include adjustments and exporting a few functions
that previously weren't exported.
Patch by me, per a suggestion from Andres Freund; thanks also
to Michael Paquier for the idea to invent guc_funcs.c.
Discussion: https://postgr.es/m/587607.1662836699@sss.pgh.pa.us
Commit d8594d123 updated the list of non-spacing codepoints used
for calculating display width, but in doing so inadvertently removed
some, since the script used for that commit only considered combining
characters.
For complete coverage for zero-width characters, include codepoints in
the category Cf (Format). To reflect the wider purpose, also rename files
and update comments that referred specifically to combining characters.
Some of these ranges have been missing since v12, but due to lack of
field complaints it was determined not important enough to justify adding
special-case logic the backbranches.
Kyotaro Horiguchi
Report by Pavel Stehule
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRBE8yvpQ0FSkPCoe0Ny1jAAsAQ6j3qMgVwWvkqAoaaNmQ%40mail.gmail.com
This adds additional variants of palloc, pg_malloc, etc. that
encapsulate common usage patterns and provide more type safety.
Specifically, this adds palloc_object(), palloc_array(), and
repalloc_array(), which take the type name of the object to be
allocated as its first argument and cast the return as a pointer to
that type. There are also palloc0_object() and palloc0_array()
variants for initializing with zero, and pg_malloc_*() variants of all
of the above.
Inspired by the talloc library.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/bb755632-2a43-d523-36f8-a1e7a389a907@enterprisedb.com
We should process completed IOs *before* trying to start more, so that
it is always possible to decode one more record when the decoded record
queue is empty, even if maintenance_io_concurrency is set so low that a
single earlier WAL record might have saturated the IO queue.
That bug was hidden because the effect of maintenance_io_concurrency was
arbitrarily clamped to be at least 2. Fix the ordering, and also remove
that clamp. We need a special case for 0, which is now treated the same
as recovery_prefetch=off, but otherwise the number is used directly.
This allows for testing with 1, which would have made the problem
obvious in simple test scenarios.
Also add an explicit error message for missing contrecords. It was a
bit strange that we didn't report an error already, and became a latent
bug with prefetching, since the internal state that tracks aborted
contrecords would not survive retrying, as revealed by
026_overwrite_contrecord.pl with this adjustment. Reporting an error
prevents that.
Back-patch to 15.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220831140128.GS31833%40telsasoft.com
The addition of published column names forgot to filter on attisdropped,
leading to cases where you could see "........pg.dropped.1........"
or the like as a reportedly-published column.
While we're here, rewrite the new subquery to get a more efficient plan
for it.
Hou Zhijie, per report from Jaime Casanova. Back-patch to v15 where
the bug was introduced. (Sadly, this means we need a post-beta4
catversion bump before beta4 has even hit the streets. I see no
good alternative though.)
Discussion: https://postgr.es/m/Yxa1SU4nH2HfN3/i@ahch-to
XLogPageRead() can retry internally after a pread() system call has
succeeded, in the case of short reads, and page validation failures
while in standby mode (see commit 0668719801). Due to an oversight in
commit 3f1ce973, these cases could leave stale data in the internal
cache of xlogreader.c without marking it invalid. The main defense
against stale cached data on failure to read a page was in the error
handling path of the calling function ReadPageInternal(), but that
wasn't quite enough for errors handled internally by XLogPageRead()'s
retry loop if we then exited with XLREAD_WOULDBLOCK.
1. ReadPageInternal() now marks the cache invalid before calling the
page_read callback, by setting state->readLen to 0. It'll be set to
a non-zero value only after a successful read. It'll stay valid as
long as the caller requests data in the cached range.
2. XLogPageRead() no long performs internal retries while reading
ahead. While such retries should work, the general philosophy is
that we should give up prefetching if anything unusual happens so we
can handle it when recovery catches up, to reduce the complexity of
the system. Let's do that here too.
3. While here, a new function XLogReaderResetError() improves the
separation between xlogrecovery.c and xlogreader.c, where the former
previously clobbered the latter's internal error buffer directly.
The new function makes this more explicit, and also clears a related
flag, without which a standby would needlessly retry in the outer
function.
Thanks to Noah Misch for tracking down the conditions required for a
rare build farm failure in src/bin/pg_ctl/t/003_promote.pl, and
providing a reproducer.
Back-patch to 15.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20220807003627.GA4168930%40rfd.leadboat.com
Tom Lane
Amit Kapila
Andrew Dunstan
David Rowley
Thomas Munro
Michael Paquier
Peter Geoghegan
Robert Haas
Peter Eisentraut
Jeff Davis
Alvaro Herrera
Alexander Korotkov
Etsuro Fujita
Andres Freund
Daniel Gustafsson
Joe Conway
Bruce Momjian
John Naylor
Heikki Linnakangas