The vars are renamed to data_directory, config_file, hba_file, and
ident_file, and are guaranteed to be set to accurate absolute paths
during postmaster startup.
This commit does not yet do anything about hiding path values from
non-superusers.
Refactor code into something reasonably understandable, cause
use of the feature to not fail in standalone backends or in
EXEC_BACKEND case, fix sloppy guc.c table entries, make the
documentation minimally usable.
* We are not sure how much precision is in tv_usec, so we
* swap the high and low 16 bits of 'later' and XOR them with
* 'earlier'. On the off chance that the result is 0, we
* loop until it isn't.
Greg Stark
different backends get a reasonably wide set of initial seeds even if
gettimeofday returns tv_usec values with only a few bits of precision.
Per recent discussion.
* Links with -leay32 and -lssleay32 instead of crypto and ssl. On win32,
"crypto and ssl" is only used for static linking.
* Initializes SSL in the backend and not just in the postmaster. We
cannot pass the SSL context from the postmaster through the parameter
file, because it contains function pointers.
* Split one error check in be-secure.c. Previously we could not tell
which of three calls actually failed. The previous code also returned
incorrect error messages if SSL_accept() failed - that function needs to
use SSL_get_error() on the return value, can't just use the error queue.
* Since the win32 implementation uses non-blocking sockets "behind the
scenes" in order to deliver signals correctly, implements a version of
SSL_accept() that can handle this. Also, add a wait function in case
SSL_read or SSL_write() needs more data.
Magnus Hagander
Win32 WaitForMultipleObjects:
ret = WaitForMultipleObjects(win32_numChildren, win32_childHNDArray,
FALSE, 0);
Problem is 'win32_numChildren' could be more then 64 ( function supports
), problem basically arise ( kills postgres ) when you create more then
64 connections and terminate some of them sill leaving more then 64.
Claudio Natoli
recommend that people go get Apache's rotatelogs program. Additional
benefits are that configuration is done through GUC, rather than
externally, and that the postmaster can monitor the log rotator and
restart it after failure (though we certainly hope that won't happen
often).
Andreas Pflug, some rework by Tom Lane.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
live backends, the archiver and stats processes never got sent a
kill signal. They'd eventually exit on their own, but not for awhile,
which is a bit annoying when you are trying to replace the executable
file on a platform that doesn't allow removal of busy executables.
Also, tweak main loop logic so that we will perform the background
tasks after select() returns EINTR.
begin the shutdown checkpoint; there isn't anything left for them to do,
so we may as well ensure that they shut down sooner rather than later.
Per discussion.
>> though - the GUC variable was not set in the child
>processes. So "show
>> lc_collate" would *always* return "C", for example. attached
>patch fixes
>> this.
>
>Hm. Why were these vars not propagated by the regular
>mechanism for GUC
>variables (write_nondefault_variables or whatever it's called)? If the
>problem is that it's not accepting PGC_INTERNAL values, then we need to
>fix it there not here, because otherwise we'll have to pass all the
>PGC_INTERNAL variables through the backend_variables file, which seems
>like a recipe for more of the same sort of bug.
Good point :-(
I think the problem is not only that it specifically does not deal with
PGC_INTERNAL variables. The problem is in the fact that
write_nondefault_variables is called *before* the locale is read
(because the locale is read from pg_control and not from any of the
"usual" ways to read it).
Attached patch is another stab at fixing it. It makes postmaster dump a
new copy of the file once it has started the database (before it accepts
any connections), which is when it will know about these parameters.
Also updates the reading code to set the context to the one where the
variable was originally set (PGC_POSTMASTER won't work for PGC_INTERNAL,
and the other way around).
We still pass lc_collate through the special file, because
set_config_option on lc_collate will speficially *not* call setlocale(),
and we need that call. But we no longer call set_config_option from
there.
Magnus Hagander
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
of ThisStartUpID and RedoRecPtr into new backends. It's a lot easier just
to make them all grab the values out of shared memory during startup.
This helps to decouple the postmaster from checkpoint execution, which I
need since I'm intending to let the bgwriter do it instead, and it also
fixes a bug in the Win32 port: ThisStartUpID wasn't getting propagated at
all AFAICS. (Doesn't give me a lot of faith in the amount of testing that
port has gotten.)
the four functions.
> Also, please justify the temp-related changes. I was not aware that we
> had any breakage there.
patch-tmp-schema.txt contains the following bits:
*) Changes pg_namespace_aclmask() so that the superuser is always able
to create objects in the temp namespace.
*) Changes pg_namespace_aclmask() so that if this is a temp namespace,
objects are only allowed to be created in the temp namespace if the
user has TEMP privs on the database. This encompasses all object
creation, not just TEMP tables.
*) InitTempTableNamespace() checks to see if the current user, not the
session user, has access to create a temp namespace.
The first two changes are necessary to support the third change. Now
it's possible to revoke all temp table privs from non-super users and
limiting all creation of temp tables/schemas via a function that's
executed with elevated privs (security definer). Before this change,
it was not possible to have a setuid function to create a temp
table/schema if the session user had no TEMP privs.
patch-area-path.txt contains:
*) Can now determine the area of a closed path.
patch-dfmgr.txt contains:
*) Small tweak to add the library path that's being expanded.
I was using $lib/foo.so and couldn't easily figure out what the error
message, "invalid macro name in dynamic library path" meant without
looking through the source code. With the path in there, at least I
know where to start looking in my config file.
Sean Chittenden
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
timezone code and other places.
Remove elog() calls from find_my_exec; do fprintf(stderr) instead. We
can then remove the exec.c handling in the makefile because it doesn't
have to be built to suppress elog calls.
find_my_exec/find_other_exec(). Remove passing of progname to these
functions as they can find that out from argv[0], which they already
have.
Make get_progname return const char *, and update all progname variables
to be const char *.
all the code that looks for other binaries. I move FindExec into
port/exec.c (and renamed it to find_my_binary()). I also added
find_other_binary that looks for another binary in the same directory as
the calling program, and checks the version string.
The only behavior change was that initdb and pg_dump would look in the
hard-coded bindir directory if it can't find the requested binary in the
same directory as the caller. The new code throws an error. The old
behavior seemed too error prone for version mismatches.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
It works on the principle of turning sockets into non-blocking, and then
emulate blocking behaviour on top of that, while allowing signals to
run. Signals are now implemented using an event instead of APCs, thus
getting rid of the issue of APCs not being compatible with "old style"
sockets functions.
It also moves the win32 specific code away from pqsignal.h/c into
port/win32, and also removes the "thread style workaround" of the APC
issue previously in place.
In order to make things work, a few things are also changed in pgstat.c:
1) There is now a separate pipe to the collector and the bufferer. This
is required because the pipe will otherwise only be signalled in one of
the processes when the postmaster goes down. The MS winsock code for
select() must have some kind of workaround for this behaviour, but I
have found no stable way of doing that. You really are not supposed to
use the same socket from more than one process (unless you use
WSADuplicateSocket(), in which case the docs specifically say that only
one will be flagged).
2) The check for "postmaster death" is moved into a separate select()
call after the main loop. The previous behaviour select():ed on the
postmaster pipe, while later explicitly saying "we do NOT check for
postmaster exit inside the loop".
The issue was that the code relies on the same select() call seeing both
the postmaster pipe *and* the pgstat pipe go away. This does not always
happen, and it appears that useing WSAEventSelect() makes it even more
common that it does not.
Since it's only called when the process exits, I don't think using a
separate select() call will have any significant impact on how the stats
collector works.
Magnus Hagander
listen_addresses parameter, as per recent discussion. The default behavior
is now to listen on localhost, which eliminates the need for the -i
postmaster switch in many scenarios.
Andrew Dunstan
initialization of stats process under EXEC_BACKEND.
[A cleaner, rationalized approach to stat/backend/SSDataBase child
processes under EXEC_BACKEND is on my TODO list. However this patch
takes care of immediate concerns (ie. stats test now passes under
win32)]
Claudio Natoli
#log_line_prefix = '' # e.g. '<%u%%%d> '
# %u=user name %d=database name
# %r=remote host and port
# %p=PID %t=timestamp %i=command tag
# %c=session id %l=session line number
# %s=session start timestamp
# %x=stop here in non-session processes
# %%='%'
Andrew Dunstan
* Mostly, casting etc to remove compilation warnings in win32 only code.
* main.c: set _IONBF to stdout/stderr under win32 (under win32, _IOLBF
defaults to full buffering)
* pg_resetxlog/Makefile: ensures dirmod.o gets cleaned (got bitten by
this when, after "make clean"ing, switching compilation between Ming +
Cygwin)
Claudio Natoli
* Changes incorrect CYGWIN defines to __CYGWIN__
* Some localtime returns NULL checks (when unchecked cause SEGVs under
Win32
regression tests)
* Rationalized CreateSharedMemoryAndSemaphores and
AttachSharedMemoryAndSemaphores (Bruce, I finally remembered to do it);
requires attention.
Claudio Natoli
number of openable files and the number already opened. This eliminates
depending on sysconf(_SC_OPEN_MAX), and allows much saner behavior on
platforms where open-file slots are used up by semaphores.
allow the bgwriter to start before the startup subprocess has finished
... it tends to crash otherwise. (The same problem may have existed for
the checkpointer, I'm not entirely sure.) Remove some code that was
redundant because the bgwriter is handled as a member of the backend list.
Natoli and Bruce Momjian (and some cosmetic fixes from Neil Conway).
Changes:
- remove duplicate signal definitions from pqsignal.h
- replace pqkill() with kill() and redefine kill() in Win32
- use ereport() in place of fprintf() in some error handling in
pqsignal.c
- export pg_queue_signal() and make use of it where necessary
- add a console control handler for Ctrl-C and similar handling
on Win32
- do WaitForSingleObjectEx() in CHECK_FOR_INTERRUPTS() on Win32;
query cancelling should now work on Win32
- various other fixes and cleanups
whereToSendOutput instead because they are really inquiring about
the correct client communication protocol. Update some comments.
This is pointing towards supporting regular FE/BE client protocol
in a standalone backend, per discussion a month or so back.
against the latest shapshot. It also includes the replacement of kill()
with pqkill() and sigsetmask() with pqsigsetmask().
Passes all tests fine on my linux machine once applied. Still doesn't
link completely on Win32 - there are a few things still required. But
much closer than before.
At Bruce's request, I'm goint to write up a README file about the method
of signals delivery chosen and why the others were rejected (basically a
summary of the mailinglist discussions). I'll finish that up once/if the
patch is accepted.
Magnus Hagander
PostmasterPid variable, which gets set (early) in PostmasterMain
getppid would not be the postmaster?
[fork/exec] Implements processCancelRequest by keeping an array of
pid/cancel_key structs in shared mem
[fork/exec] Moves AttachSharedMemoryAndSemaphores call for backends into
SubPostmasterMain
[win32] Implements reaper/waitpid by keeping an arrays of children
pids,handles in postmaster local mem
- this item is largely untested, for reasons which should be
obvious, but appears sound
[win32/all] Added extern for pgpipe in Win32 case, and changed the second
pipe call (which seems to have been missed earlier) to pgpipe
[win32] #define'd ftruncate to chsize in the Win32 case
[win32] PG_USLEEP for Win32 has a misplaced paren. Fixed.
[win32] DLLIMPORT handling for MingW case
Claudio Natoli
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
BackendFork/SSDataBase/pgstat) startup, to allow fork/exec calls to
closely mimic (the soon to be provided) Win32 CreateProcess equivalent
calls.
Claudio Natoli
on 64-bit Solaris. Use a non-system-dependent datatype for UsedShmemSegID,
namely unsigned long (which we were already assuming could hold a shmem
key anyway, cf RecordSharedMemoryInLockFile).
This first part of the background writer does no syncing at all.
It's only purpose is to keep the LRU heads clean so that regular
backends seldom to never have to call write().
Jan
to create a TCP/IP socket from FATAL to LOG. This was unwise;
historically we have expected socket conflicts to abort postmaster
startup. Conflicts on port numbers with another postmaster can only
be detected reliably at the TCP socket level.
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
of order; the 'server log' output is actually client output in these
scenarios and we ought to treat elevels the same way as in the client
case. This allows initdb to not send backend stderr to /dev/null anymore,
which makes it much more likely that people will notice problems during
initdb.
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
> weird behavior across fork boundaries; (b) the additional memory space
> that has to be duplicated into child processes will cost something per
> child launch, even if the child never uses it. But these are only
> arguments that it might not *always* be a prudent thing to do, not that
> we shouldn't give the DBA the tool to do it if he wants. So fire away.
Here is a patch for the above, including a documentation update. It
creates a new GUC variable "preload_libraries", that accepts a list in
the form:
preload_libraries = '$libdir/mylib1:initfunc,$libdir/mylib2'
If ":initfunc" is omitted or not found, no initialization function is
executed, but the library is still preloaded. If "$libdir/mylib" isn't
found, the postmaster refuses to start.
In my testing with PL/R, it reduces the first call to a PL/R function
(after connecting) from almost 2 seconds, down to about 8 ms.
Joe Conway
service it until after we execute SetThisStartUpID(). Else shutdown
process will write the wrong SUI into the shutdown checkpoint, which
seems likely to be trouble --- although I've not quite figured out
how significant it really is.
of the socket file and socket lock file; this should prevent both of them
from being removed by even the stupidest varieties of /tmp-cleaning
script. Per suggestion from Giles Lean.
datetime token tables. Even more embarrassing, the regression tests
revealed some of the problems --- but evidently the bogus output wasn't
questioned. Add code to postmaster startup to directly check the tables
for correct ordering, in hopes of not being embarrassed like this again.
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
database access outside a transaction; revert bogus performance improvement
in SIBackendInit(); improve comments; add documentation (this part courtesy
Neil Conway).
connections by the superuser only.
This patch replaces the last patch I sent a couple of days ago.
It closes a connection that has not been authorised by a superuser if it would
leave less than the GUC variable ReservedBackends
(superuser_reserved_connections in postgres.conf) backend process slots free
in the SISeg. This differs to the first patch which only reserved the last
ReservedBackends slots in the procState array. This has made the free slot
test more expensive due to the use of a lock.
After thinking about a comment on the first patch I've also made it a fatal
error if the number of reserved slots is not less than the maximum number of
connections.
Nigel J. Andrews
error handling, and simplifies the code that remains. Apparently,
the code that left Berkeley had a whole "error handling subsystem",
which exceptions and whatnot. Since we don't use that anymore,
there's no reason to keep it around.
The regression tests pass with the patch applied. Unless anyone
sees a problem, please apply.
Neil Conway
Attached are a revised set of SSL patches. Many of these patches
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
are motivated by security concerns, it's not just bug fixes. The key
differences (from stock 7.2.1) are:
*) almost all code that directly uses the OpenSSL library is in two
new files,
src/interfaces/libpq/fe-ssl.c
src/backend/postmaster/be-ssl.c
in the long run, it would be nice to merge these two files.
*) the legacy code to read and write network data have been
encapsulated into read_SSL() and write_SSL(). These functions
should probably be renamed - they handle both SSL and non-SSL
cases.
the remaining code should eliminate the problems identified
earlier, albeit not very cleanly.
*) both front- and back-ends will send a SSL shutdown via the
new close_SSL() function. This is necessary for sessions to
work properly.
(Sessions are not yet fully supported, but by cleanly closing
the SSL connection instead of just sending a TCP FIN packet
other SSL tools will be much happier.)
*) The client certificate and key are now expected in a subdirectory
of the user's home directory. Specifically,
- the directory .postgresql must be owned by the user, and
allow no access by 'group' or 'other.'
- the file .postgresql/postgresql.crt must be a regular file
owned by the user.
- the file .postgresql/postgresql.key must be a regular file
owned by the user, and allow no access by 'group' or 'other'.
At the current time encrypted private keys are not supported.
There should also be a way to support multiple client certs/keys.
*) the front-end performs minimal validation of the back-end cert.
Self-signed certs are permitted, but the common name *must*
match the hostname used by the front-end. (The cert itself
should always use a fully qualified domain name (FDQN) in its
common name field.)
This means that
psql -h eris db
will fail, but
psql -h eris.example.com db
will succeed. At the current time this must be an exact match;
future patches may support any FQDN that resolves to the address
returned by getpeername(2).
Another common "problem" is expiring certs. For now, it may be
a good idea to use a very-long-lived self-signed cert.
As a compile-time option, the front-end can specify a file
containing valid root certificates, but it is not yet required.
*) the back-end performs minimal validation of the client cert.
It allows self-signed certs. It checks for expiration. It
supports a compile-time option specifying a file containing
valid root certificates.
*) both front- and back-ends default to TLSv1, not SSLv3/SSLv2.
*) both front- and back-ends support DSA keys. DSA keys are
moderately more expensive on startup, but many people consider
them preferable than RSA keys. (E.g., SSH2 prefers DSA keys.)
*) if /dev/urandom exists, both client and server will read 16k
of randomization data from it.
*) the server can read empheral DH parameters from the files
$DataDir/dh512.pem
$DataDir/dh1024.pem
$DataDir/dh2048.pem
$DataDir/dh4096.pem
if none are provided, the server will default to hardcoded
parameter files provided by the OpenSSL project.
Remaining tasks:
*) the select() clauses need to be revisited - the SSL abstraction
layer may need to absorb more of the current code to avoid rare
deadlock conditions. This also touches on a true solution to
the pg_eof() problem.
*) the SIGPIPE signal handler may need to be revisited.
*) support encrypted private keys.
*) sessions are not yet fully supported. (SSL sessions can span
multiple "connections," and allow the client and server to avoid
costly renegotiations.)
*) makecert - a script that creates back-end certs.
*) pgkeygen - a tool that creates front-end certs.
*) the whole protocol issue, SASL, etc.
*) certs are fully validated - valid root certs must be available.
This is a hassle, but it means that you *can* trust the identity
of the server.
*) the client library can handle hardcoded root certificates, to
avoid the need to copy these files.
*) host name of server cert must resolve to IP address, or be a
recognized alias. This is more liberal than the previous
iteration.
*) the number of bytes transferred is tracked, and the session
key is periodically renegotiated.
*) basic cert generation scripts (mkcert.sh, pgkeygen.sh). The
configuration files have reasonable defaults for each type
of use.
Bear Giles
> Changes to avoid collisions with WIN32 & MFC names...
> 1. Renamed:
> a. PROC => PGPROC
> b. GetUserName() => GetUserNameFromId()
> c. GetCurrentTime() => GetCurrentDateTime()
> d. IGNORE => IGNORE_DTF in include/utils/datetime.h & utils/adt/datetim
>
> 2. Added _P to some lex/yacc tokens:
> CONST, CHAR, DELETE, FLOAT, GROUP, IN, OUT
Jan
GUC support. It's now possible to set datestyle, timezone, and
client_encoding from postgresql.conf and per-database or per-user
settings. Also, implement rollback of SET commands that occur in a
transaction that later fails. Create a SET LOCAL var = value syntax
that sets the variable only for the duration of the current transaction.
All per previous discussions in pghackers.
As proof of concept, provide an alternate implementation based on POSIX
semaphores. Also push the SysV shared-memory implementation into a
separate file so that it can be replaced conveniently.
A new pg_hba.conf column, USER
Allow specifiction of lists of users separated by commas
Allow group names specified by +
Allow include files containing lists of users specified by @
Allow lists of databases, and database files
Allow samegroup in database column to match group name matching dbname
Removal of secondary password files
Remove pg_passwd utility
Lots of code cleanup in user.c and hba.c
New data/global/pg_pwd format
New data/global/pg_group file
per recent pghackers discussion: force a new WAL record at first nextval
after a checkpoint, and ensure that xlog is flushed to disk if a nextval
record is the only thing emitted by a transaction.
when to send what to which, prevent recursion by introducing new COMMERROR
elog level for client-communication problems, get rid of direct writes
to stderr in backend/libpq files, prevent non-error elogs from going to
client during the authentication cycle.
now just below FATAL in server_min_messages. Added more text to
highlight ordering difference between it and client_min_messages.
---------------------------------------------------------------------------
REALLYFATAL => PANIC
STOP => PANIC
New INFO level the prints to client by default
New LOG level the prints to server log by default
Cause VACUUM information to print only to the client
NOTICE => INFO where purely information messages are sent
DEBUG => LOG for purely server status messages
DEBUG removed, kept as backward compatible
DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1 added
DebugLvl removed in favor of new DEBUG[1-5] symbols
New server_min_messages GUC parameter with values:
DEBUG[5-1], INFO, NOTICE, ERROR, LOG, FATAL, PANIC
New client_min_messages GUC parameter with values:
DEBUG[5-1], LOG, INFO, NOTICE, ERROR, FATAL, PANIC
Server startup now logged with LOG instead of DEBUG
Remove debug_level GUC parameter
elog() numbers now start at 10
Add test to print error message if older elog() values are passed to elog()
Bootstrap mode now has a -d that requires an argument, like postmaster
the first call of localtime() in a process will read /usr/lib/tztab or
local equivalent. Better to do this once in the postmaster and inherit
the data by fork() than to have to do it during every backend start.
to the client before closing the connection. Before 7.2 this was done
correctly, but new code would simply close the connection with no report
to the client.
so that only one signal number is used not three. Flags in shared
memory tell the reason(s) for the current signal. This method is
extensible to handle more signal reasons without chewing up even more
signal numbers, but the immediate reason is to keep pg_pwd reloads
separate from SIGHUP processing in the postmaster.
Also clean up some problems in the postmaster with delayed response to
checkpoint status changes --- basically, it wouldn't schedule a checkpoint
if it wasn't getting connection requests on a regular basis.
postmaster children before client auth step. Postmaster now rereads
pg_pwd on receipt of SIGHUP, the same way that pg_hba.conf is handled.
No cycles need be expended to validate password cache validity during
connection startup.
environment strings need to be moved around, do so when called from
initial startup (main.c), not in init_ps_status. This eliminates the
former risk of invalidating saved environment-string pointers, since
no code has yet had a chance to grab any such pointers when main.c
is running.
per suggestion from Peter. Simplify several APIs by transmitting the
original argv location directly from main.c to ps_status.c, instead of
passing it down through several levels of subroutines.
subprocesses; perhaps this will fix portability problem just noted by
Lockhart. Also, move test for bad permissions of DataDir to a more
logical place.
bootstrap) check for a valid PG_VERSION file before looking at anything
else in the data directory. This fixes confusing error report when
trying to start current sources in a pre-7.1 data directory.
Per trouble report from Rich Shepard 10/18/01.
just after receipt of the startup packet. Now, postmaster children
that are waiting for client authentication response will show as
'postgres: user database host authentication'. Also, do an
init_ps_display for startup/shutdown/checkpoint subprocesses,
so that they are readily identifiable as well. Fix an obscure race
condition that could lead to Assert failure in the postmaster ---
attempting to start a checkpoint process before any connections have
been received led to calling PostmasterRandom before setting random_seed.
a hung client or lost connection can't indefinitely block a postmaster
child (not to mention the possibility of deliberate DoS attacks).
Timeout is controlled by new authentication_timeout GUC variable,
which I set to 60 seconds by default ... does that seem reasonable?
We will no longer try to send elog messages to the client before we have
initialized backend libpq (oops); however, reporting bogus commandline
switches via elog does work now (not irrelevant, because of PGOPTIONS).
Fix problem with inappropriate sending of checkpoint-process messages
to stderr.
for them, and making them just wastes time during backend startup/shutdown.
Also, remove compile-time MAXBACKENDS limit per long-ago proposal.
You can now set MaxBackends as high as your kernel can stand without
any reconfiguration/recompilation.
Make sure it exits immediately when collector process dies --- in old code,
buffer process would hang around and compete with the new buffer process
for packets. Make sure it doesn't block on writing the pipe when the
collector falls more than a pipeload behind. Avoid leaking pgstats FDs
into every backend.
platforms system(2) gets confused unless the signal handler is set to
SIG_DFL, not SIG_IGN. pgstats.c now uses pqsignal() as it should,
not signal(). Also, arrange for the stats collector process to show
a reasonable ID in 'ps', rather than looking like a postmaster.
number in the data structure so that we can give at least a minimally
useful idea of where the mistake is when we issue syntax error messages.
Move the ClientAuthentication() call to where it should have been in
the first place, so that postmaster memory releasing can happen in a
reasonable place also. Update obsolete comments, correct one real bug
(auth_argument was not picked up correctly).
immediately, we will fork a child even if the database state does not
permit connections to be accepted (eg, we are in recovery mode).
The child process will correctly reject the connection and exit as
soon as it's finished collecting the connection request message.
However, this means that reaper() must be prepared to see child
process exit signals even while it's waiting for startup or shutdown
process to finish. As was, a connection request arriving during a
database recovery or shutdown would cause postmaster abort.
> > secure_ctx changes too. it will be PGC_BACKEND after '-p'.
>
> Oh, okay, I missed that part. Could we see the total state of the
> patch --- ie, a diff against current CVS, not a bunch of deltas?
> I've gotten confused about what's in and what's out.
Ok, here it is. Cleared the ctx comment too - after -p
it will be PGC_BACKEND in any case.
Marko Kreen
a new postmaster child process. This should eliminate problems with
authentication blocking (e.g., ident, SSL init) and also reduce problems
with the accept queue filling up under heavy load.
The option to send elog output to a different file per backend (postgres -o)
has been disabled for now because the initialization would have to happen
in a different order and it's not clear we want to keep this anyway.
Here is Tomified version of my 2 pending patches.
Dropped the set_.._real change as it is not needed.
Desc would be:
* use GUC for settings from cmdline
Marko Kreen
detected sooner in backend startup, and is treated as an expected error
(it gives 'Sorry, too many clients already' now). This allows us not
to have to enforce the MaxBackends limit exactly in the postmaster.
Also, remove ProcRemove() and fold its functionality into ProcKill().
There's no good reason for a backend not to be responsible for removing
its PROC entry, and there are lots of good reasons for the postmaster
not to be touching shared-memory data structures.
datatypes, not only strings. parse_hook is useless for bool, I suppose,
but it seems possibly useful for int and double to apply variable-specific
constraints that are more complex than simple range limits. assign_hook
is definitely useful for all datatypes --- we need it right now for bool
to support date cache reset when changing Australian timezone rule setting.
Also, clean up some residual problems with the reset all/show all patch,
including memory leaks and mistaken reset of PostPortNumber. It seems
best that RESET ALL not touch variables that don't have SUSET or
USERSET context.
directory (which can be made a symlink to put temp files on another disk).
Add code to delete leftover temp files during postmaster startup.
Bruce, with some kibitzing from Tom.
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
any other client connections that may exist (which would only happen if
another client is currently in the authentication cycle). This avoids
wastage of open descriptors in a child. It might also explain peculiar
behaviors like not closing connections when expected, since the kernel
will probably not signal EOF as long as some other backend is randomly
holding open a reference to the connection, even if the client went away
long since ...
actually) to ensure that its file access time doesn't get old enough to
tempt a /tmp directory cleaner to remove it. Still another reason we
should never have put the sockets in /tmp in the first place ...
observed by Inoue. Also, don't call ProcRemove() from postmaster if we
have detected a backend crash --- too risky if shared memory is corrupted.
It's not needed anyway, considering we are going to reinitialize shared
memory and semaphores as soon as the last child is dead.
>> xlog.c : special case for beos to avoid 'link' which does not work yet
>> beos/sem.c : implementation of new sem_ctl call (GETPID) and a new
>sem_op
>> flag (IPCNOWAIT)
>> dynloader/beos.c : add a verification of symbol validity (seem that
the
>> loader sometime return OK with an invalid symbol)
>> postmaster.c : add beos forking support for the new checkpoint
process
>> postgres.c : remove beos special case for getrusage
>> beos.h : Correction of a bas definition of AF_UNIX, misc defnitions
>>
>>
>> thanks
>>
>>
>> cyril
Cyril VELTER
might change it. Experimentation shows that the signal handler call
mechanism does not save/restore errno for you, at least not on Linux
or HPUX, so this is definitely a real risk.
postmaster, because it isn't updated after forking away from the terminal.
Apparently it's not used anyplace in the postmaster ... but seems best
to make it show the correct PID ...
socket file, in favor of having an ordinary lockfile beside the socket file.
Clean up a few robustness problems in the lockfile code. If postmaster is
going to reject a connection request based on database state, it will now
tell you so before authentication exchange not after. (Of course, a failure
after is still possible if conditions change meanwhile, but this makes life
easier for a yet-to-be-written pg_ping utility.)
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
that search loops only have to scan that far and not through all maxBackends
entries. This eliminates a performance penalty for setting maxBackends
much higher than the average number of active backends. Also, eliminate
no-longer-used 'backend tag' concept. Remove setting of environment
variables at backend start (except for CYR_RECODE), since none of them
are being examined by the backend any longer.
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
user is now defined in terms of the user id, the user name is only computed
upon request (for display purposes). This is kind of the opposite of the
previous state, which would maintain the user name and compute the user id
for permission checks.
Besides perhaps saving a few cycles (integer vs string), this now creates a
single point of attack for changing the user id during a connection, for
purposes of "setuid" functions, etc.
that RAND_MAX applies to them, since it doesn't. Instead add a
config.h parameter MAX_RANDOM_VALUE. This is currently set at 2^31-1
but could be auto-configured if that ever proves necessary. Also fix
some outright bugs like calling srand() where srandom() is appropriate.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
* the result is not recorded anywhere
* the result is not used anywhere
* the result is only used in some places, whereas others have been getting away with it
* the result is used improperly
Also make command line options handling a little better (e.g., --disable-locale,
while redundant, should really still *dis*able).
* Add option to build with OpenSSL out of the box. Fix thusly exposed
bit rot. Although it compiles now, getting this to do something
useful is left as an exercise.
* Fix Kerberos options to defer checking for required libraries until
all the other libraries are checked for.
* Change default odbcinst.ini and krb5.srvtab path to PREFIX/etc.
* Install work around for Autoconf's install-sh relative path anomaly.
Get rid of old INSTL_*_OPTS variables, now that we don't need them
anymore.
* Use `gunzip -c' instead of g?zcat. Reportedly broke on AIX.
* Look for only one of readline.h or readline/readline.h, not both.
* Make check for PS_STRINGS cacheable. Don't test for the header files
separately.
* Disable fcntl(F_SETLK) test on Linux.
* Substitute the standard GCC warnings set into CFLAGS in configure,
don't add it on in Makefile.global.
* Sweep through contrib tree to teach makefiles standard semantics.
... and in completely unrelated news:
* Make postmaster.opts arbitrary options-aware. I still think we need to
save the environment as well.
backend functions via backend PQexec(). The SPI interface has long
been our only documented way to do this, and the backend pqexec/portal
code is unused and suffering bit-rot. I'm putting it out of its misery.
and config.h. Adjusted all referring code.
Scrapped pg_version and changed initdb accordingly. Integrated
src/utils/version.c into src/backend/utils/init/miscinit.c. Changed all
callers.
Set version number to `7.1devel'. (Non-numeric version suffixes now allowed.)
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
option settings. Sort out SIGHUP vs BACKEND -- there is no total ordering
here, so make explicit checks. Add comments explaining all of this.
Removed permissions check on SHOW command.
Add examine_subclass to the game, rename to SQL_inheritance to fit the
official data model better. Adjust documentation.
Standalone backend needs to reset all options before it starts. To
facilitate that, have IsUnderPostmaster be set by the postmaster itself,
don't wait for the magic -p switch.
Also make sure that all environment variables and argv's survive
init_ps_display(). Use strdup where necessary.
Have initdb make configuration files (postgresql.conf, pg_hba.conf) mode
0600 -- having configuration files is no fun if you can't edit them.
we'll get there one day.
Use `cat' to create aclocal.m4, not `aclocal'. Some people don't
have automake installed.
Only run the autoconf rule in the top-level GNUmakefile if the
invoker specified `make configure', don't run it automatically
because of CVS timestamp skew.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
When drawing up a very simple "text-drawing" of how the negotiation is done,
I realised I had done this last part (fallback) in a very stupid way. Patch
#4 fixes this, and does it in a much better way.
Included is also the simple text-drawing of how the negotiation is done.
//Magnus
of MAXBACKENDS is now 1024, since all it's costing is about 32 bytes of memory
per array slot. configure's --with-maxbackends switch now controls DEF_MAXBACKENDS
which is simply the default value of the postmaster's -N switch. Thus,
the out-of-the-box configuration will still limit you to 64 backends,
but you can go up to 1024 backends simply by restarting the postmaster with
a different -N switch --- no rebuild required.
(--with-maxbackends). Add a postmaster switch (-N backends) that allows
the limit to be reduced at postmaster start time. (You can't increase it,
sorry to say, because there are still some fixed-size arrays.)
Grab the number of semaphores indicated by min(MAXBACKENDS, -N) at
postmaster startup, so that this particular form of bogus configuration
is exposed immediately rather than under heavy load.
> tprintf.patch
>
> tprintf.patch
>
> adds functions and macros which implement a conditional trace package
> with the ability to change flags and numeric options of running
> backends at runtime.
> Options/flags can be specified in the command line and/or read from
> the file pg_options in the data directory.
assert.patch
adds a switch to turn on/off the assert checking if enabled at compile
time. You can now compile postgres with assert checking and disable it
at runtime in a production environment.
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
things as well:
* Computes and saves a cancel key for each backend. * fflush
before forking, to eliminate double-buffering problems
between postmaster and backends.
Other cleanups.
Tom Lane