of the entries used to be zero, which I think I had deliberately done in
the name of saving cycles during ANALYZE, but it was really a rather
foolish decision. Some of the more complex views in information_schema
were getting really bad plans for lack of statistics on the columns they
were joining over.
I'm not forcing an initdb for this, but I think there will be one soon
anyway to repair some bugs in the information_schema views.
protocol, per report from Igor Shevchenko. NOTIFY thought it could
do its thing if transaction blockState is TBLOCK_DEFAULT, but in
reality it had better check the low-level transaction state is
TRANS_DEFAULT as well. Formerly it was not possible to wait for the
client in a state where the first is true and the second is not ...
but now we can have such a state. Minor cleanup in StartTransaction()
as well.
a single LEFT JOIN query instead of firing the check trigger for each
row individually. Stephan Szabo, with some kibitzing from Tom Lane and
Jan Wieck.
with required outer parentheses. Breakage seems to be leftover from
domain-constraint patches. This could be smarter about suppressing
extra parens, but at this stage of the release cycle I want certainty
not cuteness.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
invalid (has the wrong magic number) until the build is entirely
complete. This turns out to cost no additional writes in the normal
case, since we were rewriting the metapage at the end of the process
anyway. In normal scenarios there's no real gain in security, because
a failed index build would roll back the transaction leaving an unused
index file, but for rebuilding shared system indexes this seems to add
some useful protection.
post-abort cleanup hooks. I'm surprised that we have not needed this
already, but I need it now to fix a plpgsql problem, and the usefulness
for other dynamically loaded modules seems obvious.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
not just MAXALIGN boundaries. This makes a noticeable difference in
the speed of transfers to and from kernel space, at least on recent
Pentiums, and might help other CPUs too. We should look at making
this happen for local buffers and buffile.c too. Patch from Manfred Spraul.
Per recent discussion, this does not work because other backends can't
reliably see tuples in a temp table and so cannot run the RI checks
correctly. Seems better to disallow this case than go back to accessing
temp tables through shared buffers. Also, disallow FK references to
ON COMMIT DELETE ROWS tables. We already caught this problem for normal
TRUNCATE, but the path used by ON COMMIT didn't check.
really general fix might be difficult, I believe the only case where
AtCommit_Notify could see an uncommitted tuple is where the other guy
has just unlistened and not yet committed. The best solution seems to
be to just skip updating that tuple, on the assumption that the other
guy does not want to hear about the notification anyway. This is not
perfect --- if the other guy rolls back his unlisten instead of committing,
then he really should have gotten this notify. But to do that, we'd have
to wait to see if he commits or not, or make UNLISTEN hold exclusive lock
on pg_listener until commit. Either of these answers is deadlock-prone,
not to mention horrible for interactive performance. Do it this way
for now. (What happened to that project to do LISTEN/NOTIFY in memory
with no table, anyway?)
* use non-*_r function names if they are all thread-safe
* (NEED_REENTRANT_FUNCS=no)
* use *_r functions if they exist (configure test)
* do our own locking and copying of non-threadsafe functions
New to this patch is the last option.
sequence every time it's called is bogus --- it interferes with user
control over the seed, and actually decreases randomness overall
(because a seed based on time(NULL) is pretty predictable). If you really
want a reproducible result from geqo, do 'set seed = 0' before planning
a query.
o allow configure to see include/port/win32 include files
o add matching Win32 accept() prototype
o allow pg_id to compile with native Win32 API
o fix invalide mbvalidate() function calls (existing bug)
o allow /scripts to compile with native Win32 API
o add win32.c to Win32 compiles (already in *.mak files)
pghackers. This fixes the problem recently reported by Markus KrÌutner
(hash bucket split corrupts the state of scans being done concurrently),
and I believe it also fixes all the known problems with deadlocks in
hash index operations. Hash indexes are still not really ready for prime
time (since they aren't WAL-logged), but this is a step forward.
layout; therefore, this change forces REINDEX of hash indexes (though
not a full initdb). Widen hashm_ntuples to double so that hash space
management doesn't get confused by more than 4G entries; enlarge the
allowed number of free-space-bitmap pages; replace the useless bshift
field with a useful bmshift field; eliminate 4 bytes of wasted space
in the per-page special area.
scheme. A pleasant side effect is that it is *much* faster when deleting
a large fraction of the indexed tuples, because of elimination of
redundant hash_step activity induced by hash_adjscans. Various other
continuing code cleanup.
yet). Fix a couple of bugs that would only appear if multiple bitmap pages
are used, including a buffer reference leak and incorrect computation of bit
indexes. Get rid of 'overflow address' concept, which accomplished nothing
except obfuscating the code and creating a risk of failure due to limited
range of offset field. Rename some misleadingly-named fields and routines,
and improve documentation.
SQLSTATE error codes required by SQL99 (invalid format, datetime field
overflow, interval field overflow, invalid time zone displacement value).
Also emit a HINT about DateStyle in cases where it seems appropriate.
Per recent gripes.
lumping them into ERRCODE_UNDEFINED_OBJECT/ERRCODE_DUPLICATE_OBJECT.
This seems reasonable since 'object' was meant to refer to 'object in the
database' and a file is outside the database. Per request from Dave
Cramer.
max_connections at initdb time. Get rid of DEF_NBUFFERS and DEF_MAXBACKENDS
macros, which aren't doing anything useful anymore, and put more likely
defaults into postgresql.conf.sample.
handling many-way scans: instead of re-evaluating all prior indexscan
quals to see if a tuple has been fetched more than once, use a hash table
indexed by tuple CTID. But fall back to the old way if the hash table
grows to exceed SortMem.
as well as the hash function (formerly the comparison function was hardwired
as memcmp()). This makes it possible to eliminate the special-purpose
hashtable management code in execGrouping.c in favor of using dynahash to
manage tuple hashtables; which is a win because dynahash knows how to expand
a hashtable when the original size estimate was too small, whereas the
special-purpose code was too stupid to do that. (See recent gripe from
Stephan Szabo about poor performance when hash table size estimate is way
off.) Free side benefit: when using string_hash, the default comparison
function is now strncmp() instead of memcmp(). This should eliminate some
part of the overhead associated with larger NAMEDATALEN values.
be anything yielding an array of the proper kind, not only sub-ARRAY[]
constructs; do subscript checking at runtime not parse time. Also,
adjust array_cat to make array || array comply with the SQL99 spec.
Joe Conway
datatype by array_eq and array_cmp; use this to solve problems with memory
leaks in array indexing support. The parser's equality_oper and ordering_oper
routines also use the cache. Change the operator search algorithms to look
for appropriate btree or hash index opclasses, instead of assuming operators
named '<' or '=' have the right semantics. (ORDER BY ASC/DESC now also look
at opclasses, instead of assuming '<' and '>' are the right things.) Add
several more index opclasses so that there is no regression in functionality
for base datatypes. initdb forced due to catalog additions.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
yet, though). Avoid using nth() to fetch tlist entries; provide a
common routine get_tle_by_resno() to search a tlist for a particular
resno. This replaces a couple uses of nth() and a dozen hand-coded
search loops. Also, replace a few uses of nth(length-1, list) with
llast().
index pages: when _bt_getbuf asks the FSM for a free index page, it is
possible (and, in some cases, even moderately likely) that the answer
will be the same page that _bt_split is trying to split. _bt_getbuf
already knew that the returned page might not be free, but it wasn't
prepared for the possibility that even trying to lock the page could
be problematic. Fix by doing a conditional rather than unconditional
grab of the page lock.
getopt_long(). This is more or less the same problem as we saw earlier
with getaddrinfo() and struct addrinfo, and for the same reason: random
user-added libraries might contain the subroutine, but there's no
guarantee we will find the matching header files.
subplan it starts with, as they may be needed at upper join levels.
See comments added to code for the non-obvious reason why. Per bug report
from Robert Creager.
writing one more value into return arrays than will fit. This is
potentially a stack smash, though I do not think it is a problem in
current uses of the routine, since a failure return causes elog anyway.
that OS=hpux is the same as CPU=hppa. First steps at doing this.
With these patches, we still work on hppa with either gcc or HP's cc.
We might work on hpux/itanium with gcc, but I can't test it. Definitely
will not work on hpux/itanium with non-gcc compiler, for lack of spinlock
code.
CREATE TABLE (or ALTER TABLE SET DEFAULT), rather than postponing it to
the time that the default is inserted into an INSERT command by the
rewriter. This reverses an old decision that was intended to make the
world safe for writing
f1 timestamp default 'now'
but in fact merely made the failure modes subtle rather than obvious.
Per recent trouble report and followup discussion.
initdb forced since there is a chance that stored default expressions
will change.
heuristic determination of day vs month in date/time input. Add the
ability to specify that input is interpreted as yy-mm-dd order (which
formerly worked, but only for yy greater than 31). DateStyle's input
component now has the preferred spellings DMY, MDY, or YMD; the older
keywords European and US are now aliases for the first two of these.
Per recent discussions on pgsql-general.
materialized.
New items have been added to GucContext and GucSource enums, but of
course they were not added to the corresponding GucContextName[] and
GucSourceName[] arrays in the patch. Here's a new patch to fix the
resulting bugs.
Joe Conway
>>ISTM that "source" is worth knowing.
>
> Hm, possibly. Any other opinions?
This version has the seven fields I proposed, including "source". Here's
an example that shows why I think it's valuable:
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | on
context | user
vartype | bool
source | default
min_val |
max_val |
regression=# update pg_settings set setting = 'off' where name =
'enable_seqscan';
-[ RECORD 1 ]---
set_config | off
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | session
min_val |
max_val |
regression=# alter user postgres set enable_seqscan to 'off';
ALTER USER
(log out and then back in again)
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | user
min_val |
max_val |
In the first case, enable_seqscan is set to its default value. After
setting it to off, it is obvious that the value has been changed for the
session only. In the third case, you can see that the value has been set
specifically for the user.
Joe Conway
was modified for IPv6. Use a robust definition of struct sockaddr_storage,
do a proper configure test to see if ss_len exists, don't assume that
getnameinfo() will handle AF_UNIX sockets, don't trust getaddrinfo to
return the protocol we ask for, etc. This incorporates several outstanding
patches from Kurt Roeckx, but I'm to blame for anything that doesn't
work ...
for the sign of timezone offsets, ie, positive is east from UTC. These
were previously out of step with other operations that accept or show
timezones, such as I/O of timestamptz values.
without needing a running backend. Reorder postgresql.conf.sample
to match new layout of runtime.sgml. This commit re-adds work lost
in Wednesday's crash.
instead of the former kluge whereby gram.y emitted already-transformed
expressions. This is needed so that Params appearing in these clauses
actually work correctly. I suppose some might claim that the side effect
of 'SELECT ... LIMIT 2+2' working is a new feature, but I say this is
a bug fix.
It also works to create a non-polymorphic aggregate from polymorphic
functions, should you want to do that. Regression test added, docs still
lacking. By Joe Conway, with some kibitzing from Tom Lane.
ANYELEMENT. The effect is to postpone typechecking of the function
body until runtime. Documentation is still lacking.
Original patch by Joe Conway, modified to postpone type checking
by Tom Lane.
node emits only those vars that are actually needed above it in the
plan tree. (There were comments in the code suggesting that this was
done at some point in the dim past, but for a long time we have just
made join nodes emit everything that either input emitted.) Aside from
being marginally more efficient, this fixes the problem noted by Peter
Eisentraut where a join above an IN-implemented-as-join might fail,
because the subplan targetlist constructed in the latter case didn't
meet the expectation of including everything.
Along the way, fix some places that were O(N^2) in the targetlist
length. This is not all the trouble spots for wide queries by any
means, but it's a step forward.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
- LIKE <subtable> [ INCLUDING DEFAULTS | EXCLUDING DEFAULTS ]
- Quick cleanup of analyze.c function prototypes.
- New non-reserved keywords (INCLUDING, EXCLUDING, DEFAULTS), SQL 200X
Opted not to extend for check constraints at this time.
As per the definition that it's user defined columns, OIDs are NOT
inherited.
Doc and Source patches attached.
--
Rod Taylor <rbt@rbt.ca>
Regression tests for IPv6 operations added.
Documentation updated to document IPv6 bits.
Stop treating IPv4 as an "unsigned int" and IPv6 as an array of
characters. Instead, always use the array of characters so we
can have one function fits all. This makes bitncmp(), addressOK(),
and several other functions "just work" on both address families.
add family() function which returns integer 4 or 6 for IPv4 or
IPv6. (See examples below) Note that to add this new function
you will need to dump/initdb/reload or find the correct magic
to add the function to the postgresql function catalogs.
IPv4 addresses always sort before IPv6.
On disk we use AF_INET for IPv4, and AF_INET+1 for IPv6 addresses.
This prevents the need for a dump and reload, but lets IPv6 parsing
work on machines without AF_INET6.
To select all IPv4 addresses from a table:
select * from foo where family(addr) = 4 ...
Order by and other bits should all work.
Michael Graff
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
silently resolving them to type TEXT. This is comparable to what we
do when faced with UNKNOWN in CASE, UNION, and other contexts. It gets
rid of this and related annoyances:
select distinct f1, '' from int4_tbl;
ERROR: Unable to identify an ordering operator '<' for type unknown
This was discussed many moons ago, but no one got round to fixing it.
some cases of redundant clauses that were formerly not caught. We have
to special-case this because the clauses involved never get attached to
the same join restrictlist and so the existing logic does not notice
that they are redundant.
both clauses specify the same targets, rather than always using the
default ordering operator. This allows 'GROUP BY foo ORDER BY foo DESC'
to be done with only one sort step.
---------------------------------------------------------------------------
here is a patch that allows CIDR netmasks in pg_hba.conf. It allows two
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
address/mask forms:
. address/maskbits, or
. address netmask (as now)
If the patch is accepted I will submit a documentation patch to cover
it.
This is submitted by agreement with Kurt Roeckx, who has worked on a
patch that covers this and other IPv6 issues.
Andrew Dunstan
free'd for every transaction or statement, respectively. This patch
puts these data structures into static memory, thus saving a few CPU
cycles and two malloc calls per transaction or (in isolation level
READ COMMITTED) per query.
Manfred Koizar
least-recently-used strategy from clog.c into slru.c. It doesn't
change any visible behaviour and passes all regression tests plus a
TruncateCLOG test done manually.
Apart from refactoring I made a little change to SlruRecentlyUsed,
formerly ClogRecentlyUsed: It now skips incrementing lru_counts, if
slotno is already the LRU slot, thus saving a few CPU cycles. To make
this work, lru_counts are initialised to 1 in SimpleLruInit.
SimpleLru will be used by pg_subtrans (part of the nested transactions
project), so the main purpose of this patch is to avoid future code
duplication.
Manfred Koizar
protocol 3, then falls back to 2 if postmaster rejects the startup packet
with an old-format error message. A side benefit of the rewrite is that
SSL-encrypted connections can now be made without blocking. (I think,
anyway, but do not have a good way to test.)
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
#define PG_ENCODING_BE_LAST PG_ISO_8859_8
#define PG_ENCODING_FE_LAST PG_WIN1256
but the last client encoding in the enum list is actually PG_GB18030 and
it seems that
#define PG_ENCODING_IS_CLIEN_ONLY(_enc) \
(((_enc) > PG_ENCODING_BE_LAST && (_enc) <= PG_ENCODING_FE_LAST)
can never be true.
I think the define should read
#define PG_ENCODING_FE_LAST PG_GB18030
On the other hand, perhaps no-one cares, because
PG_ENCODING_IS_CLIEN_ONLY is never used.
--
Oliver Elphick Oliver.Elphick@lfix.co.uk
introducing new 'FastList' list-construction subroutines to use in
hot spots. This avoids the O(N^2) behavior of repeated lappend's
by keeping a tail pointer, while not changing behavior by reversing
list order as the lcons() method would do.
of order; the 'server log' output is actually client output in these
scenarios and we ought to treat elevels the same way as in the client
case. This allows initdb to not send backend stderr to /dev/null anymore,
which makes it much more likely that people will notice problems during
initdb.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
single-byte encodings, and a direct C implementation of the single-argument
forms (where spaces are always what gets trimmed). This is in preparation
for using rtrim1() as the bpchar-to-text cast operator, but is a useful
performance improvement even if we decide not to do that.
independently of whether the struct tm tm_zone member exists.
Also run autoheader, which seems not to have been done lately;
it added about three more things to pg_config.h.in than I was expecting...
Ross Reedstrom, a couple months back) and to detect timezones that are
using leap-second timekeeping. The unknown-zone-name test is pretty
heuristic and ugly, but it seems better than the old behavior of just
switching to GMT given a bad name. Also make DecodePosixTimezone() a
tad more robust.
on Linux and would have who knows what unpleasant effects on other platforms.
If you need another include file for Windows, then add it; don't go
messing with the semantics of every other port's include files.
Win32 port is now called 'win32' rather than 'win'
add -lwsock32 on Win32
make gethostname() be only used when kerberos4 is enabled
use /port/getopt.c
new /port/opendir.c routines
disable GUC unix_socket_group on Win32
convert some keywords.c symbols to KEYWORD_P to prevent conflict
create new FCNTL_NONBLOCK macro to turn off socket blocking
create new /include/port.h file that has /port prototypes, move
out of c.h
new /include/port/win32_include dir to hold missing include files
work around ERROR being defined in Win32 includes
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
This makes no difference for existing uses, but allows SelectSortFunction()
and pred_test_simple_clause() to use indexscans instead of seqscans to
locate entries for a particular operator in pg_amop. Better yet, they can
use the SearchSysCacheList() API to cache the search results.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
which does the same thing. Perhaps at one time there was a reason to
allow plan nodes to store their result types in different places, but
AFAICT that's been unnecessary for a good while.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
I had inadvertently omitted it while rearranging things to support
length-counted incoming messages. Also, change the parser's API back
to accepting a 'char *' query string instead of 'StringInfo', as the
latter wasn't buying us anything except overhead. (I think when I put
it in I had some notion of making the parser API 8-bit-clean, but
seeing that flex depends on null-terminated input, that's not really
ever gonna happen.)
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
into a UNION that has some type coercions applied to the component
queries, so long as the qual itself does not reference any columns that
have such coercions. Per example from Jonathan Bartlett 24-Apr-03.
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
with variable-width fields. No more truncation of long user names.
Also, libpq can now send its environment-variable-driven SET commands
as part of the startup packet, saving round trips to server.
expressions, ARRAY(sub-SELECT) expressions, some array functions.
Polymorphic functions using ANYARRAY/ANYELEMENT argument and return
types. Some regression tests in place, documentation is lacking.
Joe Conway, with some kibitzing from Tom Lane.
page when it's read in, per pghackers discussion around 17-Feb. Add a
GUC variable zero_damaged_pages that causes the response to be a WARNING
followed by zeroing the page, rather than the normal ERROR; this is per
Hiroshi's suggestion that there needs to be a way to get at the data
in the rest of the table.
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
them as arrays of the internal datatype. This requires treating the
stavalues columns as 'anyarray' rather than 'text[]', which is not 100%
kosher but seems to work fine for the purposes we need for pg_statistic.
Perhaps in the future 'anyarray' will be allowed more generally.
refers to a non-DISTINCT output column of a DISTINCT ON subquery, or
if it refers to a function-returning-set, we cannot push it down.
But the old implementation refused to push down *any* quals if the
subquery had any such 'dangerous' outputs. Now we just look at the
output columns actually referenced by each qual expression. More code
than before, but probably no slower since we don't make unnecessary checks.
some of the algorithms for higher functions. I see about a factor of ten
speedup on the 'numeric' regression test, but it's unlikely that that test
is representative of real-world applications.
initdb forced due to change of on-disk representation for NUMERIC.
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
> >
> > - Add check in pg_dump to see if the value returned is the max /min
> > values and replace with NO MAXVALUE, NO MINVALUE.
> >
> > - Change START and INCREMENT to use START WITH and INCREMENT BY syntax.
> > This makes it a touch easier to port to other databases with sequences
> > (Oracle). PostgreSQL supports both syntaxes already.
>
> + char bufm[100],
> + bufx[100];
>
> This seems to be an arbitary size. Why not set it to the actual maximum
> length?
>
> Also:
>
> + snprintf(bufm, 100, INT64_FORMAT, SEQ_MINVALUE);
> + snprintf(bufx, 100, INT64_FORMAT, SEQ_MAXVALUE);
>
> sizeof(bufm), sizeof(bufx) is probably the more
> maintenance-friendly/standard way to do it.
I changed the code to use sizeof - but will wait for a response from
Peter before changing the size. It's consistent throughout the sequence
code to be 100 for this purpose.
Rod Taylor <rbt@rbt.ca>
> weird behavior across fork boundaries; (b) the additional memory space
> that has to be duplicated into child processes will cost something per
> child launch, even if the child never uses it. But these are only
> arguments that it might not *always* be a prudent thing to do, not that
> we shouldn't give the DBA the tool to do it if he wants. So fire away.
Here is a patch for the above, including a documentation update. It
creates a new GUC variable "preload_libraries", that accepts a list in
the form:
preload_libraries = '$libdir/mylib1:initfunc,$libdir/mylib2'
If ":initfunc" is omitted or not found, no initialization function is
executed, but the library is still preloaded. If "$libdir/mylib" isn't
found, the postmaster refuses to start.
In my testing with PL/R, it reduces the first call to a PL/R function
(after connecting) from almost 2 seconds, down to about 8 ms.
Joe Conway
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
entire contents of the subplan into the tuplestore before we can return
any tuples. Instead, the tuplestore holds what we've already read, and
we fetch additional rows from the subplan as needed. Random access to
the previously-read rows works with the tuplestore, and doesn't affect
the state of the partially-read subplan. This is a step towards fixing
the problems with cursors over complex queries --- we don't want to
stick in Materialize nodes if they'll prevent quick startup for a cursor.
cleaning out temp namespaces. We don't really want the server log to be
cluttered with 'Drop cascades to table foo' every time someone uses a
temp table...
problems in applications that may have a large number of files open,
such that libpq's socket number exceeds the range supported by fd_set.
From Chris Brown.
at database shutdown, and then load it again at database startup. This
preserves our hard-won knowledge of free space across restarts (given
an orderly shutdown, that is).
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
end of a btree index. This isn't super-effective, since we won't move
nondeletable pages, but it's better than nothing. Also, improve stats
displayed during VACUUM VERBOSE.
deleting multiple index entries on a single index page. This makes for
a very substantial reduction in the amount of WAL traffic during a
large delete operation.
setting timezone-related variables during transaction start. They were
not used anyway in platforms that HAVE_TM_ZONE or HAVE_INT_TIMEZONE,
which it appears is *all* the platforms we are currently supporting.
For platforms that have neither, we now only support UTC or numeric-
offset-from-UTC timezones.
now knows what to do upon hitting a dead page (in theory anyway, it's
untested...). Add a post-VACUUM-cleanup entry point for index AMs, to
provide a place for dead-page scavenging to happen.
Also, fix oversight that broke btpo_prev links in temporary indexes.
initdb forced due to additions in pg_am.
support btree compaction, as per proposal of a few days ago. btree index
pages no longer store parent links, instead they have a level indicator
(counting up from zero for leaf pages). The FixBTree recovery logic is
removed, and replaced by code that detects missing parent-level insertions
during WAL replay. Also, generate appropriate WAL entries when updating
btree metapage and when building a btree index from scratch. I believe
btree indexes are now completely WAL-legal for the first time.
initdb forced due to index and WAL changes.
answer when SET TIMEZONE has been done since the start of the current
transaction. Per bug report from Robert Haas.
I plan some futher cleanup in HEAD, but this is a low-risk patch for
the immediate issue in 7.3.
correctly. See following thread for more details.
Subject: [HACKERS] client_encoding directive is ignored in postgresql.conf
From: Tatsuo Ishii <t-ishii@sra.co.jp>
Date: Wed, 29 Jan 2003 22:24:04 +0900 (JST)
implementation
of '\e' history tracking for systems that have a readline compatability
library without replace_history_entry. I fall back to pushing the query
onto the history stack after the \e, rather than replacing it.
The patch adds one more place to look for readline headers, and a test
for replace_history_entry. I've only included the patch for configure.in
Ross J. Reedstrom
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
functions which limited the maximum date for a timestamp to AD 1465001.
The new limit is AD 5874897.
The files affected are:
doc/src/sgml/datatype.sgml:
Documentation change due to patch. Included is a notice about
the reduced range when using an eight-byte integer for timestamps.
src/backend/utils/adt/datetime.c:
Replacement functions for j2date() and date2j() functions.
src/include/utils/datetime.h:
Corrected a bug with the limit on the earliest possible date,
Nov 23,-4713 has a Julian day count of -1. The earliest possible
date should be Nov 24, -4713 with a day count of 0.
src/test/regress/expected/horology-no-DST-before-1970.out:
src/test/regress/expected/horology-solaris-1947.out:
src/test/regress/expected/horology.out:
Copies of expected output for regression testing.
Note: Only horology.out has been physically tested. I do not have access
to a Solaris box and I don't know how to provoke the "pre-1970" test.
src/test/regress/sql/horology.sql:
Added some test cases to check extended range.
John Cochran
the outer query. (The implementation is a bit klugy, but it would take
nontrivial restructuring to make it nicer, which this is probably not
worth.) This avoids unnecessary sort steps in examples like
SELECT foo,count(*) FROM (SELECT ... ORDER BY foo,bar) sub GROUP BY foo
which means there is now a reasonable technique for controlling the
order of inputs to custom aggregates, even in the grouping case.
> =================================================================
> User interface proposal for multi-row function targetlist entries
> =================================================================
> 1. Only one targetlist entry may return a set.
> 2. Each targetlist item (other than the set returning one) is
> repeated for each item in the returned set.
>
Having gotten no objections (actually, no response at all), I can only
assume no one had heartburn with this change. The attached patch covers
the first of the two proposals, i.e. restricting the target list to only
one set returning function.
Joe Conway
longer works -- IncrHeapAccessStat() didn't actually *do* anything
anymore, so no reason to keep it around AFAICS. I also fixed a
grammatical error in a comment.
Neil Conway
takes two parameters, an OID x and an integer y, and returns "true" with
probability 1/y (the OID argument is ignored). This can be useful -- for
example, it can be used to select a random sampling of the rows in a
table (which is what the "random" regression test uses it for).
This patch removes that function, because it was old and messy. The old
function had the following problems:
- it was undocumented
- it was poorly named
- it was designed to workaround an optimizer bug that no longer exists
(the OID argument is to ensure that the optimizer won't optimize away
calls to the function; AFAIK marking the function as 'volatile' suffices
nowadays)
- it used a different random-number generation technique than the other
PSRNG-related functions in the backend do (it called random() like they
do, but it had its own logic for setting a set and deciding when to
reseed the RNG).
Ok, this patch removes oidrand(), oidsrand(), and userfntest(), and
improves the SGML docs a little bit (un-commenting the setseed()
documentation).
Neil Conway
On Wed, 2003-01-08 at 21:59, Christopher Kings-Lynne wrote:
> I agree. I want to remove OIDs from heaps of our tables when we go to 7.3.
> I'd rather not have to do it in the dump due to down time.
Rod Taylor <rbt@rbt.ca>
> User interface proposal for multi-row function targetlist entries
> =================================================================
> 1. Only one targetlist entry may return a set.
> 2. Each targetlist item (other than the set returning one) is
> repeated for each item in the returned set.
>
Having gotten no objections (actually, no response at all), I can only assume
no one had heartburn with this change. The attached patch covers the first of
the two proposals, i.e. restricting the target list to only one set returning
function.
It compiles cleanly, and passes all regression tests. If there are no
objections, please apply.
Any suggestions on where this should be documented (other than maybe sql-select)?
Thanks,
Joe
p.s. Here's what the previous example now looks like:
CREATE TABLE bar(f1 int, f2 text, f3 int);
INSERT INTO bar VALUES(1, 'Hello', 42);
INSERT INTO bar VALUES(2, 'Happy', 45);
CREATE TABLE foo(a int, b text);
INSERT INTO foo VALUES(42, 'World');
INSERT INTO foo VALUES(42, 'Everyone');
INSERT INTO foo VALUES(45, 'Birthday');
INSERT INTO foo VALUES(45, 'New Year');
CREATE TABLE foo2(a int, b text);
INSERT INTO foo2 VALUES(42, '!!!!');
INSERT INTO foo2 VALUES(42, '????');
INSERT INTO foo2 VALUES(42, '####');
INSERT INTO foo2 VALUES(45, '$$$$');
CREATE OR REPLACE FUNCTION getfoo(int) RETURNS SETOF text AS '
SELECT b FROM foo WHERE a = $1
' language 'sql';
CREATE OR REPLACE FUNCTION getfoo2(int) RETURNS SETOF text AS '
SELECT b FROM foo2 WHERE a = $1
' language 'sql';
regression=# SELECT f1, f2, getfoo(f3) AS f4 FROM bar;
f1 | f2 | f4
----+-------+----------
1 | Hello | World
1 | Hello | Everyone
2 | Happy | Birthday
2 | Happy | New Year
(4 rows)
regression=# SELECT f1, f2, getfoo(f3) AS f4, getfoo2(f3) AS f5 FROM bar;
ERROR: Only one target list entry may return a set result
Joe Conway
codes, per discussion from last March. parse.h should now be included
*only* by gram.y, scan.l, keywords.c, parser.c. This prevents surprising
misbehavior after seemingly-trivial grammar adjustments.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
locParam lists can be converted to bitmapsets to speed updating. Also,
replace 'locParam' with 'allParam', which contains all the paramIDs
relevant to the node (i.e., the union of extParam and locParam); this
saves a step during SetChangedParamList() without costing anything
elsewhere.
Instead of grovelling through pg_class to find them, make use of the
handy dandy dependency mechanism: just delete everything that depends
on our temp schema. Unlike the pg_class scan, the dependency mechanism
is smart enough to delete things in an order that doesn't fall foul of
any dependency restrictions. Fixes problem reported by David Heggie:
a temp table with a serial column may cause a backend FATAL exit at
shutdown time, if it chances to try to delete the temp sequence first.
expression accepted by the regex operators, per discussion yesterday.
Along the way, reduce deadlock_timeout from PGC_POSTMASTER to PGC_SIGHUP
category. It is probably best to insist that all backends share the same
setting, but that doesn't mean it has to be frozen at startup.
(extracted from Tcl 8.4.1 release, as Henry still hasn't got round to
making it a separate library). This solves a performance problem for
multibyte, as well as upgrading our regexp support to match recent Tcl
and nearly match recent Perl.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
nodes where it's not really necessary. In many cases where the scan node
is not the topmost plan node (eg, joins, aggregation), it's possible to
just return the table tuple directly instead of generating an intermediate
projection tuple. In preliminary testing, this reduced the CPU time
needed for 'SELECT COUNT(*) FROM foo' by about 10%.
value of MAX_TIME_PRECISION in floating-point-timestamp-storage case
from 13 to 10, which is as much as time_out is actually willing to print.
(The alternative of increasing the number of digits we are willing to
print looks risky; we might find ourselves printing roundoff garbage.)
passed to join selectivity estimators. Make use of this in eqjoinsel
to derive non-bogus selectivity for IN clauses. Further tweaking of
cost estimation for IN.
initdb forced because of pg_proc.h changes.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
necessarily following the JOIN syntax to develop the query plan. The old
behavior is still available by setting GUC variable JOIN_COLLAPSE_LIMIT
to 1. Also create a GUC variable FROM_COLLAPSE_LIMIT to control the
similar decision about when to collapse sub-SELECT lists into their parent
lists. (This behavior existed already, but the limit was always
GEQO_THRESHOLD/2; now it's separately adjustable.)
of the socket file and socket lock file; this should prevent both of them
from being removed by even the stupidest varieties of /tmp-cleaning
script. Per suggestion from Giles Lean.
of known-equal expressions includes any constant expressions (including
Params from outer queries), we actively suppress any 'var = var'
clauses that are or could be deduced from the set, generating only the
deducible 'var = const' clauses instead. The idea here is to push down
the restrictions implied by the equality set to base relations whenever
possible. Once we have applied the 'var = const' clauses, the 'var = var'
clauses are redundant, and should be suppressed both to save work at
execution and to avoid double-counting restrictivity.
that's selecting into a RECORD variable returns zero rows, make it
assign an all-nulls row to the RECORD; this is consistent with what
happens when the SELECT INTO target is not a RECORD. In support of
this, tweak the SPI code so that a valid tuple descriptor is returned
even when a SPI select returns no rows.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
that used to do it in planner. That was an ancient kluge that was
never satisfactory; errors should be detected at parse time when possible.
But at the time we didn't have the support mechanism (expression_tree_walker
et al) to make it convenient to do in the parser.
simplify callers. It turns out the common case is that the caller
does want to recurse into sub-queries, so push support for that into
these subroutines.
datetime token tables. Even more embarrassing, the regression tests
revealed some of the problems --- but evidently the bogus output wasn't
questioned. Add code to postmaster startup to directly check the tables
for correct ordering, in hopes of not being embarrassed like this again.
join_references(), it's practical to consolidate all join_references()
processing into the set_plan_references traversal in setrefs.c. This
seems considerably cleaner than the old way where we did it for join
quals in createplan.c and for targetlists in setrefs.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
a qualification clause (and hence can get away with being sloppy about
distinguishing FALSE from UNKNOWN). We need to know this in subselect.c;
marking the subplans in setrefs.c is too late.
costs for expression evaluation, not only per-tuple cost as before.
This extension is needed in order to deal realistically with hashed or
materialized sub-selects.
Simplify SubLink by storing just a List of operator OIDs, instead of
a list of incomplete OpExprs --- that was a bizarre and bulky choice,
with no redeeming social value since we have to build new OpExprs
anyway when forming the plan tree.
'NOT (x IN (subselect))', that is 'NOT (x = ANY (subselect))',
rather than 'x <> ALL (subselect)' as we formerly did. This
opens the door to optimizing NOT IN the same way as IN, whereas
there's no hope of optimizing the expression using <>. Also,
convert 'x <> ALL (subselect)' to the NOT(IN) style, so that
the optimization will be available when processing rules dumped
by older Postgres versions.
initdb forced due to small change in SubLink node representation.
causes interval rounding not to work as expected in 7.3, for example
SELECT '18:17:15.6'::interval(0) does not round the value.
I did not force initdb, but one is needed to install the added row.
the index AM when we know we are fetching a unique row. However, this
logic did not consider the possibility that it would be asked to fetch
backwards. Also fix mark/restore to work correctly in this scenario.
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
computation: reduce the bucket number mod nbatch. This changes the
association between original bucket numbers and batches, but that
doesn't matter. Minor other cleanups in hashjoin code to help
centralize decisions.
allocation in best_inner_indexscan(). While at it, simplify GEQO's
interface to the main planner --- make_join_rel() offers exactly the
API it really wants, whereas calling make_rels_by_clause_joins() and
make_rels_by_clauseless_joins() required jumping through hoops.
Rewrite gimme_tree for clarity (sometimes iteration is much better than
recursion), and approximately halve GEQO's runtime by recognizing that
tours of the forms (a,b,c,d,...) and (b,a,c,d,...) are equivalent
because of symmetry in make_join_rel().
disallowed by CREATE TABLE (eg, pseudo-types); also disallow these types
from being introduced by the range-function syntax. While at it, allow
CREATE TABLE to create zero-column tables, per recent pghackers discussion.
I am back-patching this into 7.3 since failure to disallow pseudo-types
is arguably a security hole.
practice of evaluating MemSet's arguments multiple times, except for
the special case of newNode(), where we can assume the argument is
a constant sizeof() operator.
Also, add GetMemoryChunkContext() to mcxt.c's API, in preparation for
fixing recent GEQO breakage.
given any malloc block until something is first allocated in it; but
thereafter, MemoryContextReset won't release that first malloc block.
This preserves the quick-reset property of the original policy, without
forcing 8K to be allocated to every context whether any of it is ever
used or not. Also, remove some more no-longer-needed explicit freeing
during ExecEndPlan.
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
* Add schema, cast, and conversion backslash commands to psql
I had to create a new publically available function,
pg_conversion_is_visible, as it seemed to be missing from the catalogs.
This required me to do no small amount of hacking around in namespace.c
I have updated the \? help and sgml docs.
\dc - list conversions [PATTERN]
\dC - list casts
\dn list schemas
I didn't support patterns with casts as there's nothing obvious to match
against.
Catalog version incremented --- initdb required.
Christopher Kings-Lynne
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
documentation and regression test mods. It seemed small and unobtrusive enough
to not require a specific proposal on the hackers list -- but if not, let me
know and I'll make a pitch. Otherwise, if there are no objections please apply.
Joe Conway