Per buildfarm member mandrill, it seems that
max_parallel_workers_per_gather may not always be set to the default value
of 2 when the new test added in 16fd03e95 is executed. Here let's just
explicitly set that to 2 so that the planner never opts to use more than
that many parallel workers.
This adds combine, serial and deserial functions for the array_agg() and
string_agg() aggregate functions, thus allowing these aggregates to
partake in partial aggregations. This allows both parallel aggregation to
take place when these aggregates are present and also allows additional
partition-wise aggregation plan shapes to include plans that require
additional aggregation once the partially aggregated results from the
partitions have been combined.
Author: David Rowley
Reviewed-by: Andres Freund, Tomas Vondra, Stephen Frost, Tom Lane
Discussion: https://postgr.es/m/CAKJS1f9sx_6GTcvd6TMuZnNtCh0VhBzhX6FZqw17TgVFH-ga_A@mail.gmail.com
Enforce wal_retrieve_retry_interval on a per-subscription basis,
rather than globally, and arrange to skip that delay in case of
an intentional worker exit. This probably makes little difference
in the field, where apply workers wouldn't be restarted often;
but it has a significant impact on the runtime of our logical
replication regression tests (even though those tests use
artificially-small wal_retrieve_retry_interval settings already).
Nathan Bossart, with mostly-cosmetic editorialization by me
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
The motivation for this change is that when pg_dump dumps a
partitioned index that's marked REPLICA IDENTITY, it generates a
command sequence that applies REPLICA IDENTITY before the partitioned
index has been marked valid, causing restore to fail. We could
perhaps change pg_dump to not do it like that, but that would be
difficult and would not fix existing dump files with the problem.
There seems to be very little reason for the backend to disallow
this anyway --- the code ignores indisreplident when the index
isn't valid --- so instead let's fix it by allowing the case.
Commit 9511fb37a previously expressed a concern that allowing
indisreplident to be set on invalid indexes might allow us to
wind up in a situation where a table could have indisreplident
set on multiple indexes. I'm not sure I follow that concern
exactly, but in any case the only way that could happen is because
relation_mark_replica_identity is too trusting about the existing set
of markings being valid. Let's just rip out its early-exit code path
(which sure looks like premature optimization anyway; what are we
doing expending code to make redundant ALTER TABLE ... REPLICA
IDENTITY commands marginally faster and not-redundant ones marginally
slower?) and fix it to positively guarantee that no more than one
index is marked indisreplident.
The pg_dump failure can be demonstrated in all supported branches,
so back-patch all the way. I chose to back-patch 9511fb37a as well,
just to keep indisreplident handling the same in all branches.
Per bug #17756 from Sergey Belyashov.
Discussion: https://postgr.es/m/17756-dd50e8e0c8dd4a40@postgresql.org
When the length was too short, the server read outside the allocation.
That yielded the same log noise as sending the correct length with
(backendPID,cancelAuthCode) matching nothing. Change to a message about
the unexpected length. Given the attacker's lack of control over the
memory layout and the general lack of diversity in memory layouts at the
code in question, we doubt a would-be attacker could cause a segfault.
Hence, while the report arrived via security@postgresql.org, this is not
a vulnerability. Back-patch to v11 (all supported versions).
Andrey Borodin, reviewed by Tom Lane. Reported by Andrey Borodin.
Until now we used struct timespec for instr_time on all platforms but
windows. Using struct timespec causes a fair bit of memory (struct timeval is
16 bytes) and runtime overhead (much more complicated additions). Instead we
can convert the time to nanoseconds in INSTR_TIME_SET_CURRENT(), making the
remaining operations cheaper.
Representing time as int64 nanoseconds provides sufficient range, ~292 years
relative to a starting point (depending on clock source, relative to the unix
epoch or the system's boot time). That'd not be sufficient for calendar time
stored on disk, but is plenty for runtime interval time measurement.
On windows instr_time already is represented as cycles. It might make sense to
represent time as cycles on other platforms as well, as using cycle
acquisition instructions like rdtsc directly can reduce the overhead of time
acquisition substantially. This could be done in a fairly localized manner as
the code stands after this commit.
Because the windows and non-windows paths are now more similar, use a common
set of macros. To make that possible, most of the use of LARGE_INTEGER had to
be removed, which looks nicer anyway.
To avoid users of the API relying on the integer representation, we wrap the
64bit integer inside struct struct instr_time.
Author: Andres Freund <andres@anarazel.de>
Author: Lukas Fittl <lukas@fittl.com>
Author: David Geier <geidav.pg@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20230113195547.k4nlrmawpijqwlsa@awork3.anarazel.de
These are all not necessary from a correctness POV. However, in the near
future instr_time will be simplified to an int64, at which point gcc would
otherwise start to warn about the changed places.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20230116023639.rn36vf6ajqmfciua@awork3.anarazel.de
This is similar to 835d476, except that this one is to add node
attributes related to query jumbling and avoid long lines in the headers
and in the node structures changed by this commit.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
This will ease a follow-up move that will generate automatically this
code. The C file is renamed, for consistency with the node-related
files whose code are generated by gen_node_support.pl:
- queryjumble.c -> queryjumblefuncs.c
- utils/queryjumble.h -> nodes/queryjumble.h
Per a suggestion from Peter Eisentraut.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/Y5BHOUhX3zTH/ig6@paquier.xyz
This provides a way to reserve connection slots for non-superusers.
The slots reserved via the new GUC are available only to users who
have the new predefined role pg_use_reserved_connections.
superuser_reserved_connections remains as a final reserve in case
reserved_connections has been exhausted.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
This is in preparation for adding a new reserved_connections GUC,
but aligning the GUC name with the variable name is also a good
idea on general principle.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
Commit ea92368cd1 made max_wal_senders
a separate pool of backends from max_connections, but the documentation
and error message for superuser_reserved_connections weren't updated
at the time, and as a result are somewhat misleading. Update.
This is arguably a back-patchable bug fix, but because it seems quite
minor, no back-patch.
Patch by Nathan Bossart. Reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/20230119194601.GA4105788@nathanxps13
While pg_hba.conf has support for non-literal username matches, and
this commit extends the capabilities that are supported for the
PostgreSQL user listed in an ident entry part of pg_ident.conf, with
support for:
1. The "all" keyword, where all the requested users are allowed.
2. Membership checks using the + prefix.
3. Using a regex to match against multiple roles.
1. is a feature that has been requested by Jelte Fennema, 2. something
that has been mentioned independently by Andrew Dunstan, and 3. is
something I came up with while discussing how to extend the first one,
whose implementation is facilitated by 8fea868.
This allows matching certain system users against many different
postgres users with a single line in pg_ident.conf. Without this, one
would need one line for each of the postgres users that a system user
can log in as, which can be cumbersome to maintain.
Tests are added to the TAP test of peer authentication to provide
coverage for all that.
Note that this introduces a set of backward-incompatible changes to be
able to detect the new patterns, for the following cases:
- A role named "all".
- A role prefixed with '+' characters, which is something that would not
have worked in HBA entries anyway.
- A role prefixed by a slash character, similarly to 8fea868.
Any of these can be still be handled by using quotes in the Postgres
role defined in an ident entry.
A huge advantage of this change is that the code applies the same checks
for the Postgres roles in HBA and ident entries, via the common routine
check_role().
**This compatibility change should be mentioned in the release notes.**
Author: Jelte Fennema
Discussion: https://postgr.es/m/DBBPR83MB0507FEC2E8965012990A80D0F7FC9@DBBPR83MB0507.EURPRD83.prod.outlook.com
If the public schema has a non-default owner (perhaps due to
dropping and recreating it) then use of pg_dump's "--if-exists"
option results in a warning message:
warning: could not find where to insert IF EXISTS in statement "-- *not* dropping schema, since initdb creates it"
This is harmless since the dump output is the same either way,
but nonetheless it's undesirable. It's the fault of commit
a7a7be1f2, which created situations where a TOC entry's "defn"
or "dropStmt" fields could be just comments. Although that
commit fixed up the kluges in pg_backup_archiver.c that munge defn
strings, it missed doing so for the one that munges dropStmts.
Per bug# 17753 from Justin Zhang.
Discussion: https://postgr.es/m/17753-9c8773631747ee1c@postgresql.org
This adjusts a few places which were appending a string constant
containing spaces onto a StringInfo. We have appendStringInfoSpaces for
that job, so let's use that instead.
For the change to jsonb.c's add_indent() function, appendStringInfoString
was being called inside a loop to append 4 spaces on each loop. This
meant that enlargeStringInfo would get called once per loop. Here it
should be much more efficient to get rid of the loop and just calculate
the number of spaces with "level * 4" and just append all the spaces in
one go.
Here we additionally adjust the appendStringInfoSpaces function so it
makes use of memset rather than a while loop to apply the required spaces
to the StringInfo. One of the problems with the while loop was that it
was incrementing one variable and decrementing another variable once per
loop. That's more work than what's required to get the job done. We may
as well use memset for this rather than trying to optimize the existing
loop. Some testing has shown memset is faster even for very small sizes.
Discussion: https://postgr.es/m/CAApHDvp_rKkvwudBKgBHniNRg67bzXVjyvVKfX0G2zS967K43A@mail.gmail.com
This patch largely reverts what I did in commits c9b0c678d and
78e73e875. The maximum cover length limit that I added in 78e73e875
(to band-aid over c9b0c678d's performance issues) creates too many
user-visible behavior discrepancies, as complained of for example in
bug #17691. The real problem with hlCover() is not what I thought
at the time, but more that it seems to have been designed with only
AND tsquery semantics in mind. It doesn't work quite right for OR,
and even less so for NOT or phrase queries. However, we can improve
that situation by building a variant of TS_execute() that returns a
list of match locations. We already get an ExecPhraseData struct
representing match locations for the primitive case of a simple match,
as well as one for a phrase match; we just need to add some logic to
combine these for AND and OR operators. The result is a list of
ExecPhraseDatas, which hlCover can regard as having simple AND
semantics, so that its old algorithm works correctly.
There's still a lot not to like about ts_headline's behavior, but
I think the remaining issues have to do with the heuristics used
in mark_hl_words and mark_hl_fragments (which, likewise, were not
revisited when phrase search was added). Improving those is a task
for another day.
Patch by me; thanks to Alvaro Herrera for review.
Discussion: https://postgr.es/m/840.1669405935@sss.pgh.pa.us
When ending recovery based on recovery_target_xid matching with
recovery_target_inclusive = off, we printed an incorrect timestamp
(always 2000-01-01) in the "recovery stopping before ... transaction"
log message. This is a consequence of sloppy refactoring in
c945af80c: the code to fetch recordXtime out of the commit/abort
record used to be executed unconditionally, but it was changed
to get called only in the RECOVERY_TARGET_TIME case. We need only
flip the order of operations to restore the intended behavior.
Per report from Torsten Förtsch. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAKkG4_kUevPqbmyOfLajx7opAQk6Cvwkvx0HRcFjSPfRPTXanA@mail.gmail.com
RelOptInfo.userid is the same for all relations in a given inheritance
tree, so the code in examine_variable() and example_simple_variable()
that repeats the ACL checks on the root parent rel instead of a given
leaf child relations need not recompute userid too.
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20221210201753.GA27893@telsasoft.com
This is wrong since 88e9823, that has switched the WAL sizing
configuration from checkpoint_segments to min_wal_size and
max_wal_size. This missed the recalculation of the internal value of
the internal "CheckPointSegments", that works as a mapping of the old
GUC checkpoint_segments, on reload, for example, and it controls the
timing of checkpoints depending on the volume of WAL generated.
Most users tend to leave checkpoint_completion_target at 0.9 to smooth
the I/O workload, which is why I guess this has gone unnoticed for so
long, still it can be useful to tweak and reload the value dynamically
in some cases to control the timing of checkpoints.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXgPPAm28mruojSBno+F_=9cTOOxHAywu_dfZPeBdybQw@mail.gmail.com
Backpatch-through: 11
No buildfarm members have reported that yet, but a recently-refreshed
Debian host did.
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/Y8ey5z4Nav62g4/K@paquier.xyz
Backpatch-through: 11
Turns out the compression.sql test creates a view that needs
to be adjusted in the wake of 47bb9db75 --- except that without
--with-lz4, it fails to create the view at all, so I'd not
noticed this in testing.
Per buildfarm member crake.
In c8ad4d8166 dlist_member_check()'s arguments were made const. Unfortunately
the implementation of dlist_member_check() used dlist_foreach(), which
currently doesn't work for const lists.
As a workaround, open-code the list iteration. The other check functions
already do so.
Discussion: https://postgr.es/m/20230118182214.co7dp4oahiunwg57@awork3.anarazel.de
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
This is a second attempt at committing 1b4d280ea. The difference
from the first time is that now we can add some filtering rules to
AdjustUpgrade.pm to allow cross-version upgrade testing to pass
despite all the cosmetic changes in CREATE VIEW outputs.
Amit Langote (filtering rules by me)
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
Avoid explicitly grouping by columns that we know are redundant
for sorting, for example we need group by only one of x and y in
SELECT ... WHERE x = y GROUP BY x, y
This comes up more often than you might think, as shown by the
changes in the regression tests. It's nearly free to detect too,
since we are just piggybacking on the existing logic that detects
redundant pathkeys. (In some of the existing plans that change,
it's visible that a sort step preceding the grouping step already
didn't bother to sort by the redundant column, making the old plan
a bit silly-looking.)
To do this, build processed_groupClause and processed_distinctClause
lists that omit any provably-redundant sort items, and consult those
not the originals where relevant. This means that within the
planner, one should usually consult root->processed_groupClause or
root->processed_distinctClause if one wants to know which columns
are to be grouped on; but to check whether grouping or distinct-ing
is happening at all, check non-NIL-ness of parse->groupClause or
parse->distinctClause. This is comparable to longstanding rules
about handling the HAVING clause, so I don't think it'll be a huge
maintenance problem.
nodeAgg.c also needs minor mods, because it's now possible to generate
AGG_PLAIN and AGG_SORTED Agg nodes with zero grouping columns.
Patch by me; thanks to Richard Guo and David Rowley for review.
Discussion: https://postgr.es/m/185315.1672179489@sss.pgh.pa.us
Add leader_pid to pg_stat_subscription. leader_pid is the process ID of
the leader apply worker if this process is a parallel apply worker. If
this field is NULL, it indicates that the process is a leader apply
worker or a synchronization worker. The new column makes it easier to
distinguish parallel apply workers from other kinds of workers and helps
to identify the leader for the parallel workers corresponding to a
particular subscription.
Additionally, update the leader_pid column in pg_stat_activity as well to
display the PID of the leader apply worker for parallel apply workers.
Author: Hou Zhijie
Reviewed-by: Peter Smith, Sawada Masahiko, Amit Kapila, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Presently, restore_command uses a different code path than
archive_cleanup_command and recovery_end_command. These code paths
are similar and can be easily combined, as long as it is possible to
identify if a command should:
- Issue a FATAL on signal.
- Exit immediately on SIGTERM.
While on it, this removes src/common/archive.c and its associated
header. Since the introduction of c96de2c, BuildRestoreCommand() has
become a simple wrapper of replace_percent_placeholders() able to call
make_native_path(). This simplifies shell_restore.c as long as
RestoreArchivedFile() includes a call to make_native_path().
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
This makes sure that the internal logic of these functions does not
attempt to change the value of the arguments constified, and it removes
one unconstify() in basic_archive.c.
Author: Nathan Bossart
Reviewed-by: Andrew Dunstan, Peter Eisentraut
Discussion: https://postgr.es/m/20230114231126.GA2580330@nathanxps13
It's likely worth adding some automated way of preventing further
omissions. We're discussing how to best do that.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230117173509.GV9837@telsasoft.com
test_extensions' test_ext_cine extension has the same upgrade hazard
as test_ext7: the regression test leaves it in an updated state
from which no downgrade path to default is provided. This causes
the update_extensions.sql script helpfully provided by pg_upgrade
to fail. So drop it in cross-version-upgrade testing.
Not entirely sure how come I didn't hit this in testing yesterday;
possibly I'd built the upgrade reference databases with
testmodules-install-check disabled.
Backpatch to v10 where this module was introduced.
Instead of half a dozen of mostly-duplicate conditional branches,
write one common one that can handle most catalogs. We already have
all the information we need, such as which system catalog corresponds
to which catalog table and which column is the ACL column.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/504bc485-6bd6-dd1b-fe10-e7351aeb310d@enterprisedb.com
Remove some code guarded by IS_MINUS() or IS_PLUS(), where the entire
stanza is inside an else-block where both of these are false. This
should slightly improve test coverage.
While at it, remove coding that apparently assumes that unsetting a
bit is so expensive that we have to first check if it's already set
in the first place.
Per Coverity report from Ranier Vilela
Analysis and review by Justin Pryzby
Discussion: https://www.postgresql.org/message-id/20221223010818.GP1153%40telsasoft.com
The code that decides the apply action missed to handle non-transactional
messages and we didn't catch it in our testing as currently such messages
are simply ignored by the apply worker. This was introduced by changes in
commit 216a784829.
While testing this, I noticed that we forgot to reset stream_xid after
processing the stream stop message which could also result in the wrong
apply action after the fix for non-transactional messages.
In passing, change assert to elog for unexpected apply action in some of
the routines so as to catch the problems in the production environment, if
any.
Reported-by: Tomas Vondra
Author: Amit Kapila
Reviewed-by: Tomas Vondra, Sawada Masahiko, Hou Zhijie
Discussion: https://postgr.es/m/984ff689-adde-9977-affe-cd6029e850be@enterprisedb.com
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Entries of pg-user in pg_ident.conf that are quoted and include '\1'
allow a replacement from a subexpression in a system user regexp. This
commit adds a test to track this behavior and a note in the
documentation, as it could be affected by the use of an AuthToken for
the pg-user in the IdentLines parsed.
This subject has come up in the discussion aimed at extending the
support of pg-user in ident entries for more patterns.
Author: Jelte Fennema
Discussion: https://postgr.es/m/CAGECzQRNow4MwkBjgPxywXdJU_K3a9+Pm78JB7De3yQwwkTDew@mail.gmail.com
In 1349d2790, we gave the planner the ability to provide ORDER BY/DISTINCT
Aggrefs with presorted input so that nodeAgg would not have to perform
sorts during execution. That commit failed to properly consider the
implications of if the Aggref had a volatile function in its ORDER
BY/DISTINCT clause. As it happened, this resulted in an ERROR about the
volatile function being missing from the targetlist.
Here, instead of adding the volatile function to the targetlist, we just
never consider an Aggref with a volatile function in its ORDER BY/DISTINCT
clause when choosing which Aggrefs we should sort by. We do this as if we
were to choose a plan which provided these aggregates with presorted
input, then if there were many such aggregates which could all share the
same sort order, then it may be surprising if they all shared the same
sort sometimes and didn't at other times when some other set of aggregates
were given presorted results. We can avoid this inconsistency by just
never providing these volatile function aggregates with presorted input.
Reported-by: Dean Rasheed
Discussion: https://postgr.es/m/CAEZATCWETioXs5kY8vT6BVguY41_wD962VDk=u_Nvd7S1UXzuQ@mail.gmail.com
To test pg_upgrade across major PG versions, we have to be able to
modify or drop any old objects with no-longer-supported properties,
and we have to be able to deal with cosmetic changes in pg_dump output.
Up to now, the buildfarm and pg_upgrade's own test infrastructure had
separate implementations of the former, and we had nothing but very
ad-hoc rules for the latter (including an arbitrary threshold on how
many lines of unchecked diff were okay!). This patch creates a Perl
module that can be shared by both those use-cases, and adds logic
that deals with pg_dump output diffs in a much more tightly defined
fashion.
This largely supersedes previous efforts in commits 0df9641d3,
9814ff550, and 62be9e4cd, which developed a SQL-script-based solution
for the task of dropping old objects. There was nothing fundamentally
wrong with that work in itself, but it had no basis for solving the
output-formatting problem. The most plausible way to deal with
formatting is to build a Perl module that can perform editing on the
dump files; and once we commit to that, it makes more sense for the
same module to also embed the knowledge of what has to be done for
dropping old objects.
Back-patch versions of the helper module as far as 9.2, to
support buildfarm animals that still test that far back.
It's also necessary to back-patch PostgreSQL/Version.pm,
because the new code depends on that. I fixed up pg_upgrade's
002_pg_upgrade.pl in v15, but did not look into back-patching
it further than that.
Tom Lane and Andrew Dunstan
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
Tighten up the way that visibilitymap_set() is called: request that both
the all-visible and all-frozen bits get set whenever the all-frozen bit
is set, regardless of what we think we know about the present state of
the all-visible bit. Also make sure that the page level PD_ALL_VISIBLE
flag is set in the same code path.
In practice there doesn't seem to be a concrete scenario in which the
previous approach could lead to inconsistencies. It was almost possible
in scenarios involving concurrent HOT updates from transactions that
abort, but (unlike pruning) freezing can never remove XIDs > VACUUM's
OldestXmin, even those from transactions that are known to have aborted.
That was protective here.
These issues have been around since commit a892234f83, which added the
all-frozen bit to the VM fork. There is no known live bug here, so no
backpatch.
In passing, add some defensive assertions to catch the issue, and stop
reading the existing state of the VM when setting the VM in VACUUM's
final heap pass. We already know that affected pages must have had at
least one LP_DEAD item before we set it LP_UNUSED, so there is no point
in reading the VM when it is set like this.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WznuNGSzF8v6OsgjaC5aYsb3cZ6HW6MLm30X0d65cmSH6A@mail.gmail.com
Most callers of BufFileRead() want to check whether they read the full
specified length. Checking this at every call site is very tedious.
This patch provides additional variants BufFileReadExact() and
BufFileReadMaybeEOF() that include the length checks.
I considered changing BufFileRead() itself, but this function is also
used in extensions, and so changing the behavior like this would
create a lot of problems there. The new names are analogous to the
existing LogicalTapeReadExact().
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f3501945-c591-8cc3-5ef0-b72a2e0eaa9c@enterprisedb.com
The code specific to the execution of archive_cleanup_command,
recovery_end_command and restore_command is moved to a new file named
shell_restore.c. The code is split into three functions:
- shell_restore(), that attempts the execution of a shell-based
restore_command.
- shell_archive_cleanup(), for archive_cleanup_command.
- shell_recovery_end(), for recovery_end_command.
This introduces no functional changes, with failure patterns and logs
generated in consequence being the same as before (one case actually
generates one less DEBUG2 message "could not restore" when a restore
command succeeds but the follow-up stat() to check the size fails, but
that only matters with a elevel high enough).
This is preparatory work for allowing recovery modules, a facility
similar to archive modules, with callbacks shaped similarly to the
functions introduced here.
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
While system_user was stored as an AuthToken in IdentLine, pg_user was
stored as a plain string. This commit changes the code as we start
storing pg_user as an AuthToken too.
This does not have any functional changes, as all the operations on
pg_user only use the string from the AuthToken. There is no regexp
compiled and no check based on its quoting, yet. This is in preparation
of more features that intend to extend its capabilities, like support
for regexps and group membership.
Author: Jelte Fennema
Discussion: https://postgr.es/m/CAGECzQRNow4MwkBjgPxywXdJU_K3a9+Pm78JB7De3yQwwkTDew@mail.gmail.com
int2vectorin limited the number of array elements it'd take to
FUNC_MAX_ARGS, which is probably fine for the traditional use-cases.
But now that pg_publication_rel.prattrs is an int2vector, it's not
fine at all: it's easy to construct cases where that can have up to
about MaxTupleAttributeNumber entries. Trying to replicate such
tables leads to logical-replication failures.
As long as we have to touch this code anyway, let's just remove
the a-priori limit altogether, and let it accept any size that'll
be allowed by repalloc. (Note that since int2vector isn't toastable,
we cannot store arrays longer than about BLCKSZ/2; but there is no
good excuse for letting int2vectorin depend on that. Perhaps we
will lift the no-toast restriction someday.)
While at it, also improve the equivalent logic in oidvectorin.
I don't know of any practical use-case for long oidvectors right
now, but doing it right actually makes the code shorter.
Per report from Erik Rijkers. Back-patch to v15 where
pg_publication_rel.prattrs was added.
Discussion: https://postgr.es/m/668ba539-33c5-8190-ca11-def2913cb94b@xs4all.nl
In commit 8bf6ec3ba I assumed that no code path could reach
ExecGetExtraUpdatedCols without having gone through
ExecInitStoredGenerated. That turns out not to be the case in
logical replication: if there's an ON UPDATE trigger on the target
table, trigger.c will call this code before anybody has set up its
generated columns. Having seen that, I don't have a lot of faith in
there not being other such paths. ExecGetExtraUpdatedCols can call
ExecInitStoredGenerated for itself, as long as we are willing to
assume that it is only called in CMD_UPDATE operations, which on
the whole seems like a safer leap of faith.
Per report from Vitaly Davydov.
Discussion: https://postgr.es/m/d259d69652b8c2ff50e14cda3c236c7f@postgrespro.ru
Commit 60684dd8 left loose ends when it came to maintaining toast
tables or partitions.
For toast tables, simply skip the privilege check if the toast table
is an indirect target of the maintenance command, because the main
table privileges have already been checked.
For partitions, allow the maintenance command if the user has the
MAINTAIN privilege on the partition or any parent.
Also make CLUSTER emit "skipping" messages when the user doesn't have
privileges, similar to VACUUM.
Author: Nathan Bossart
Reported-by: Pavel Luzanov
Reviewed-by: Pavel Luzanov, Ted Yu
Discussion: https://postgr.es/m/20230113231339.GA2422750@nathanxps13
When VACUUM/ANALYZE are run on an entire database, it warns of
skipping relations for which the user doesn't have sufficient
privileges. That only makes sense for tables, so skip such messages
for indexes, etc.
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/c0a85c2e83158560314b576b6241c8ed0aea1745.camel%40j-davis.com
The prior behavior was confusing and hard to document. For instance,
if you had UPDATE privileges, you could lock a table in any lock mode
except ACCESS SHARE mode.
Now, if granted a privilege to lock at a given mode, one also has
privileges to lock at a less-conflicting mode. MAINTAIN, UPDATE,
DELETE, and TRUNCATE privileges allow any lock mode. INSERT privileges
allow ROW EXCLUSIVE (or below). SELECT privileges allow ACCESS SHARE.
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/9550c76535404a83156252b25a11babb4792ea1e.camel%40j-davis.com
We don't allow different column lists for the same table in the different
publications of the single subscription. A publication with a column list
except for dropped and generated columns should be considered the same as
a publication with no column list (which implicitly includes all columns
as part of the columns list). However, as we were not excluding the
dropped and generated columns from the column list combining such
publications leads to an error "cannot use different column lists for
table ...".
We decided not to backpatch this fix as there is a risk of users seeing
this as a behavior change and also we didn't see any field report of this
case.
Author: Shi yu
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OSZPR01MB631091CCBC56F195B1B9ACB0FDFE9@OSZPR01MB6310.jpnprd01.prod.outlook.com
This hash table is used to cache the state of streaming transactions being
applied by the parallel apply workers. So, this should be created only
when we are successful in launching at least one worker. This avoids rare
case memory leak when we are never able to launch any worker.
Author: Ted Yu
Discussion: https://postgr.es/m/CALte62wg0rBR3Vj2beV=HiWo2qG9L0hzKcX=yULNER0wmf4aEw@mail.gmail.com
Regexp replacement with \1 in pg_ident.conf is tested in one check of
the kerberos test suite, still it requires a dependency on
--with-gssapi to be triggered. This commit adds to the test suite of
peer authentication two tests to check the replacement of \1 in a
pg-username, coupled with a system-username regexp:
- With a subexpression in system-username, similarly to the kerberos
test suite.
- Without a subexpression in system-username, checking for a failure.
This had no coverage until now, and the error pattern is checked in the
server logs.
Author: Jelte Fennema
Discussion: https://postgr.es/m/CAGECzQRNow4MwkBjgPxywXdJU_K3a9+Pm78JB7De3yQwwkTDew@mail.gmail.com
The WAIT_USE_EPOLL and WAIT_USE_KQUEUE implementations of
WaitEventSetWaitBlock() confused the size of their internal buffer with
the size of the caller's output buffer, and could ask the kernel for too
many events. In fact the set of events retrieved from the kernel needs
to be able to fit in both buffers, so take the smaller of the two.
The WAIT_USE_POLL and WAIT_USE WIN32 implementations didn't have this
confusion.
This probably didn't come up before because we always used the same
number in both places, but commit 7389aad6 calculates a dynamic size at
construction time, while using MAXLISTEN for its output event buffer on
the stack. That seems like a reasonable thing to want to do, so
consider this to be a pre-existing bug worth fixing.
As discovered by valgrind on skink.
Back-patch to all supported releases for epoll, and to release 13 for
the kqueue part, which copied the incorrect epoll code.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/901504.1673504836%40sss.pgh.pa.us
The current jsonpath code assumes that the referenced variable always exists.
It could only throw an error at the value valuation time. At the same time
existence checking assumes variable is present without valuation, and error
suppression doesn't work for missing variables.
This commit makes existense checking trigger an error for missing variables.
This makes the overall behavior consistent.
Backpatch to 12 where jsonpath was introduced.
Reported-by: David G. Johnston
Discussion: https://postgr.es/m/CAKFQuwbeytffJkVnEqDyLZ%3DrQsznoTh1OgDoOF3VmOMkxcTMjA%40mail.gmail.com
Author: Alexander Korotkov, David G. Johnston
Backpatch-through: 12
Const qualifiers ensure that we don't do something stupid in the
function implementation. Additionally they clarify the interface. As
an example:
void
slist_delete(slist_head *head, const slist_node *node)
Here one can instantly tell that node->next is not going to be set to
NULL. Finally, const qualifiers potentially allow the compiler to do
more optimizations. This being said, no benchmarking was done for
this patch.
The functions that return non-const pointers like slist_next_node(),
dclist_next_node() etc. are not affected by the patch intentionally.
Author: Aleksander Alekseev
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAJ7c6TM2%3D08mNKD9aJg8vEY9hd%2BG4L7%2BNvh30UiNT3kShgRgNg%40mail.gmail.com
The code that handles authentication for user maps was pretty confusing
with its choice of variable names. It involves two types of users: a
system user and a Postgres user (well, role), and these were not named
consistently throughout the code that processes the user maps loaded
from pg_ident.conf at authentication.
This commit changes the following things to improve the situation:
- Rename "pg_role" to "pg_user" and "token" to "system_user" in
IndetLine. These choices are more consistent with the pg_ident.conf
example in the docs, as well. "token" has been introduced recently in
fc579e1, and it is way worse than the choice before that, "ident_user".
- Switch the order of the fields in IdentLine to map with the order of
the items in the ident files, as of map name, system user and PG user.
- In check_ident_usermap(), rename "regexp_pgrole" to "expanded_pg_user"
when processing a regexp for the system user entry in a user map. This
variable does not store a regular expression at all: it would be either
a string or a substitution to \1 if the Postgres role is specified as
such.
Author: Jelte Fennema
Discussion: https://postgr.es/m/CAGECzQTkwELHUOAKhvdA+m3tWbUQySHHkExJV8GAZ1pwgbEgXg@mail.gmail.com
A comment in hba.h mentioned that AuthTokens are used when building the
IdentLines from pg_ident.conf, but since 8fea868 that has added support
of regexps for databases and roles in pg_hba.conf, it is also the case
of HBA files. This refreshes the comment to refer to both HBA and ident
files.
Issue spotted while going through a different patch.
The creation of a logical decoding context in CreateDecodingContext()
updates some data of its slot for two-phase transactions if enabled by
the caller, but the code forgot to acquire a spinlock when updating
these fields like any other code paths. This could lead to the read of
inconsistent data.
Oversight in a8fd13c.
Author: Sawada Masahiko
Discussion: https://postgr.es/m/CAD21AoAD8_fp47191LKuecjDd3DYhoQ4TaucFco1_TEr_jQ-Zw@mail.gmail.com
Backpatch-through: 15
This reverts commit 1b4d280ea1.
It's broken the buildfarm members that run cross-version-upgrade tests,
because they're not prepared to deal with cosmetic differences between
CREATE VIEW commands emitted by older servers and HEAD. Even if we had
a solution to that, which we don't, it'd take some time to roll it out
to the affected animals. This improvement isn't valuable enough to
justify addressing that problem on an emergency basis, so revert it
for now.
Switch to a design similar to regular backends, instead of the previous
arrangement where signal handlers did non-trivial state management and
called fork(). The main changes are:
* The postmaster now has its own local latch to wait on. (For now, we
don't want other backends setting its latch directly, but that could
probably be made to work with more research on robustness.)
* The existing signal handlers are cut in two: a handle_pm_XXX() part
that just sets pending_pm_XXX flags and the latch, and a
process_pm_XXX() part that runs later when the latch is seen.
* Signal handlers are now installed with the regular pqsignal()
function rather than the special pqsignal_pm() function; historical
portability concerns about the effect of SA_RESTART on select() are no
longer relevant, and we don't need to block signals anymore.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
Rename the heapam.c freeze plan deduplication routines added by commit
9e540599 to names that follow conventions for functions in heapam.c.
Also relocate the functions so that they're next to their caller, which
runs during original execution, when FREEZE_PAGE WAL records are built.
The routines were initially placed next to (and followed the naming
conventions of) conceptually related REDO routine code, but that scheme
turned out to be kind of jarring when considered in a wider context.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230109214308.icz26oqvt3k2274c@awork3.anarazel.de
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
This appends the set of object types supported by these commands, and
the objects defined in the cluster are completed after that. Note that
these may not be in the extension being working on when using DROP, to
keep the code simple, but this is much more useful than the previous
behavior of not knowing the objects that can be touched.
Author: Vignesh C
Discussion: https://postgr.es/m/CALDaNm3LVM2QcUWqgOonKZH80TveT-tUthbw4ZhuE_6pD3yi-A@mail.gmail.com
Document that TransactionIdDidAbort() won't indicate that transactions
that were in-progress during a crash have aborted. Tie this to existing
discussion of the TransactionIdDidCommit() and TransactionIdDidCommit()
protocol that code in heapam_visibility.c (and a few other places) must
observe.
Follow-up to bugfix commit eb5ad4ff.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wzn4bEEqgmaUQL3aJ73yM9gAeK-wE4ngi7kjRjLztb+P0w@mail.gmail.com
In both partitioning and traditional inheritance, require child
columns to be GENERATED if and only if their parent(s) are.
Formerly we allowed the case of an inherited column being
GENERATED when its parent isn't, but that results in inconsistent
behavior: the column can be directly updated through an UPDATE
on the parent table, leading to it containing a user-supplied
value that might not match the generation expression. This also
fixes an oversight that we enforced partition-key-columns-can't-
be-GENERATED against parent tables, but not against child tables
that were dynamically attached to them.
Also, remove the restriction that the child's generation expression
be equivalent to the parent's. In the wake of commit 3f7836ff6,
there doesn't seem to be any reason that we need that restriction,
since generation expressions are always computed per-table anyway.
By removing this, we can also allow a child to merge multiple
inheritance parents with inconsistent generation expressions, by
overriding them with its own expression, much as we've long allowed
for DEFAULT expressions.
Since we're rejecting a case that we used to accept, this doesn't
seem like a back-patchable change. Given the lack of field
complaints about the inconsistent behavior, it's likely that no
one is doing this anyway, but we won't change it in minor releases.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
Commits cf5eb37c5 and e5b8a4c09 each created a new role that they
forgot to remove again. This breaks the use-case of running "make
installcheck" more than once, and it's also against project policy
because it'd be quite unfriendly behavior if one were running
"make installcheck" against a non-throwaway installation.
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
Prior to this, we only considered a full sort on the cheapest input path
and uniquifying any path which was already sorted in the required sort
order. Here we adjust create_final_distinct_paths() so that it also
adds an Incremental Sort path on any path which has presorted keys.
Additionally, this adjusts the parallel distinct code so that we now
consider sorting the cheapest partial path and incrementally sorting any
partial paths with presorted keys. Previously we didn't consider any
sorting for parallel distinct and only added a unique path atop any path
which had the required pathkeys already.
Author: David Rowley
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvo8Lz2H=42urBbfP65LTcEUOh288MT7DsG2_EWtW1AXHQ@mail.gmail.com
Can be set to the empty string, or to either or both of "set" or
"inherit". If set to a non-empty value, a non-superuser who creates
a role (necessarily by relying up the CREATEROLE privilege) will
grant that role back to themselves with the specified options.
This isn't a security feature, because the grant that this feature
triggers can also be performed explicitly. Instead, it's a user experience
feature. A superuser would necessarily inherit the privileges of any
created role and be able to access all such roles via SET ROLE;
with this patch, you can configure createrole_self_grant = 'set, inherit'
to provide a similar experience for a user who has CREATEROLE but not
SUPERUSER.
Discussion: https://postgr.es/m/CA+TgmobN59ct+Emmz6ig1Nua2Q-_o=r6DSD98KfU53kctq_kQw@mail.gmail.com
Previously, CREATEROLE users were permitted to make nearly arbitrary
changes to roles that they didn't create, with certain exceptions,
particularly superuser roles. Instead, allow CREATEROLE users to make such
changes to roles for which they possess ADMIN OPTION, and to
grant membership only in roles for which they possess ADMIN OPTION.
When a CREATEROLE user who is not a superuser creates a role, grant
ADMIN OPTION on the newly-created role to the creator, so that they
can administer roles they create or for which they have been given
privileges.
With these changes, CREATEROLE users still have very significant
powers that unprivileged users do not receive: they can alter, rename,
drop, comment on, change the password for, and change security labels
on roles. However, they can now do these things only for roles for
which they possess appropriate privileges, rather than all
non-superuser roles; moreover, they cannot grant a role such as
pg_execute_server_program unless they themselves possess it.
Patch by me, reviewed by Mark Dilger.
Discussion: https://postgr.es/m/CA+TgmobN59ct+Emmz6ig1Nua2Q-_o=r6DSD98KfU53kctq_kQw@mail.gmail.com
As I suspected, some machines have even more low-order-bit
inaccuracy than the ones I tested. Tweak new test so that
(hopefully) it will pass everywhere. Per buildfarm.
Discussion: https://postgr.es/m/4173840.1673290336@sss.pgh.pa.us
We aren't using this anymore in the wake of commit 09d517773,
so delete it. We can always revert this if some future use
emerges, but I think our standards for test quality are now
high enough that that will never happen.
Discussion: https://postgr.es/m/4173840.1673290336@sss.pgh.pa.us
We had some pretty ad-hoc and inefficient code here. To make
matters worse, it didn't test the properties of the random()
function very thoroughly, and it had a test failure rate of
one in every few tens of thousands of runs. Replace the
script altogether with new test cases that prove much more
about random()'s output, run faster, and can be calculated
to have test failure rates on the order of 1e-9.
Having done that, the failure rate of this script should be
negligible in comparison to other causes of test failures,
so remove the "ignore" marker for it in parallel_schedule.
(If it does fail, we'd like to know about that, so "ignore"
was always pretty counterproductive.)
Tom Lane and Dean Rasheed
Discussion: https://postgr.es/m/4173840.1673290336@sss.pgh.pa.us
This allows left join removals and unique joins to work with partitioned
tables. The planner just lacked sufficient proofs that a given join
would not cause any row duplication. Unique indexes currently serve as
that proof, so have get_relation_info() populate the indexlist for
partitioned tables too.
Author: Arne Roland
Reviewed-by: Alvaro Herrera, Zhihong Yu, Amit Langote, David Rowley
Discussion: https://postgr.es/m/c3b2408b7a39433b8230bbcd02e9f302@index.de
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
GIN index scans were not taking any descent CPU-based cost into account. That
made them look cheaper than other types of indexes when they shouldn't be.
We use the same heuristic as for btree indexes, but multiply it by the number
of searched entries.
Additionally, the CPU cost for the tree was based largely on a
genericcostestimate. For a GIN index, we should not charge index quals per
tuple, but per entry. On top of this, charge cpu_index_tuple_cost per actual
tuple.
This should fix the cases where a GIN index is preferred over a btree and
the ones where a memoize node is not added on top of the GIN index scan
because it seemed too cheap.
We don't packpatch this to evade unexpected plan changes in stable versions.
Discussion: https://postgr.es/m/CABs3KGQnOkyQ42-zKQqiE7M0Ks9oWDSee%3D%2BJx3-TGq%3D68xqWYw%40mail.gmail.com
Discussion: https://postgr.es/m/3188617.44csPzL39Z%40aivenronan
Author: Ronan Dunklau
Reported-By: Hung Nguyen
Reviewed-by: Tom Lane, Alexander Korotkov
This allows an optional "S" modifier to be added to \dp and \z, to
have them include system objects in the list.
Note that this also changes the behaviour of a bare \dp or \z without
the "S" modifier to include temp objects in the list, and exclude
information_schema objects, making them consistent with other psql
meta-commands.
Nathan Bossart, reviewed by Maxim Orlov.
Discussion: https://postgr.es/m/20221206193606.GB3078082@nathanxps13
After restart, we try to stream the changes for large transactions that
were not sent before server crash and restart. However, we forget to send
the abort message for such transactions. This leads to spurious streaming
files on the subscriber which won't be cleaned till the apply worker or
the subscriber server restarts.
Reported-by: Dilip Kumar
Author: Hou Zhijie
Reviewed-by: Dilip Kumar and Amit Kapila
Backpatch-through: 14
Discussion: https://postgr.es/m/OS0PR01MB5716A773F46768A1B75BE24394FB9@OS0PR01MB5716.jpnprd01.prod.outlook.com
During the development of 728202b63, which was aimed at reducing the
number of sorts required to evaluate multiple window functions with
different WindowClause definitions, the code written sorted the
WindowClauses in reverse tleSortGroupRef order. There appears to be no
discussion in the thread which was opened to discuss the development of
this patch and no comments mentioning the fact that having the
WindowClauses in reverse tleSortGroupRef order makes it more likely that
the final WindowClause to be evaluated will provide presorted input to
the query's DISTINCT or ORDER BY clause. The reason for this is that the
tleSortGroupRef indexes are assigned for the DISTINCT and ORDER BY clauses
before they are for the WindowClauses PARTITION BY and ORDER BY clauses.
Putting the WindowClause with the lowest tleSortGroupRef last means that
it's more likely that no additional sorting is required for the query's
DISTINCT or ORDER BY clause.
All we're doing here is adding some tests and a comment to help ensure
that remains true and that we don't accidentally forget to consider this
again should we ever rewrite that code.
Author: Ankit Kumar Pandey, David Rowley
Discussion: https://postgr.es/m/CAApHDvq=g2=ny59f1bvwRVvupsgPHK-KjLPBsSL25fVuGZ4idQ@mail.gmail.com
Waken related worker processes immediately at commit of a transaction
that has performed ALTER SUBSCRIPTION (including the RENAME and
OWNER variants). This reduces the response time for such operations.
In the real world that might not be worth much, but it shaves several
seconds off the runtime for the subscription test suite.
In the case of PREPARE, we just throw away this notification state;
it doesn't seem worth the work to preserve it. The workers will
still react after the eventual COMMIT PREPARED, but not as quickly.
Nathan Bossart
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
Previously this function checked to see if we were ready to switch
to two_phase mode at its start, but that's silly: we should check
at the end, after we've done the work that might make us ready.
This simple change removes one sleep cycle from the time needed to
switch to two_phase mode. In the real world that might not be
worth much, but it shaves a few seconds off the runtime for the
subscription test suite.
Nathan Bossart
Discussion: https://postgr.es/m/20221122004119.GA132961@nathanxps13
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
A schema rename should cause reporting the new qualified names of
tables to logical replication subscribers, but that wasn't happening.
Flush the RelationSyncCache to make it happen.
(If you ask me, the new test case shows that the behavior in this area
is still pretty dubious, but apparently it's operating as designed.)
Vignesh C
Discussion: https://postgr.es/m/CALDaNm32vLRv5KdrDFeVC-CU+4Wg1daA55hMqOxDGJBzvd76-w@mail.gmail.com
The ALTER DATABASE|FUNCTION|PROCEDURE|ROLE|ROUTINE|USER ... SET <name>
case in psql tab completion failed to exclude <name> = "SCHEMA", which
caused ALTER FUNCTION|PROCEDURE|ROUTINE ... SET SCHEMA to complete
with "FROM CURRENT" and "TO", which won't work.
Fix that, so that those cases now complete with the list of schemas,
like other ALTER ... SET SCHEMA commands.
Noticed while testing the recent patch to improve tab completion for
ALTER FUNCTION/PROCEDURE/ROUTINE, but this is not directly related to
that patch. Rather, this is a long-standing bug, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/CALDaNm0s7GQmkLP_mx5Cvk=UzYMnjhPmXBxU8DsHEunFbC5sTg@mail.gmail.com
Commit 57faaf376 added pg_truncate(const char *path, off_t length), but
"length" was ignored under WIN32 and the file was unconditionally
truncated to 0.
There was no live bug, since the only caller passes 0.
Fix, and back-patch to 14 where the function arrived.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230106031652.GR3109%40telsasoft.com
Testing on CI showed that Cygwin's semctl() can fail with EAGAIN
(possibly due to resource limits in cygserver that could be tuned, not
examined). Switch to so-called POSIX semaphores instead, which don't
seem to fail in that way (possibly due to a more direct implementation
using Windows semaphore primitives instead of talking to cygserver,
based on a cursory glance at the source).
Other known problems still prevent PostgreSQL from running on Cygwin
without random crashes, but this rarer problem was noticed while
testing.
Discussion: https://postgr.es/m/CA%2BhUKG%2BQ6DU4Ov9LrvUyDcF3oHS4KMRVSKmVGaeePq-kOyG9gA%40mail.gmail.com
This is just refactoring; there should be no functonal change. It
might have the effect of slightly reducing the number of calls to
GetUserId(), but the real point is to facilitate future work in
this area.
Patch by me, reviewed by Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmobFzTLkLwOquFrAcdsWBsOWDr-_H-jw+qBvfx-wSzMwDA@mail.gmail.com
Instead of having checks in AddRoleMems() and DelRoleMems(), have
the callers perform checks where it's required. In some cases it
isn't, either because the caller has already performed a check for
the same condition, or because the check couldn't possibly fail.
The "Skip permission check if nothing to do" check in each of
AddRoleMems() and DelRoleMems() is pointless. Some call sites
can't pass an empty list. Others can, but in those cases, the role
being modified is one that the current user has just created.
Therefore, they must have permission to modify it, and so no
permission check is required at all.
This patch is intended to have no user-visible consequences. It is
intended to simplify future work in this area.
Patch by me, reviewed by Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmobFzTLkLwOquFrAcdsWBsOWDr-_H-jw+qBvfx-wSzMwDA@mail.gmail.com
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
This fixes a couple of unused variable warnings that could be seen when
compiling with MEMORY_CONTEXT_CHECKING but not USE_ASSERT_CHECKING.
Defining MEMORY_CONTEXT_CHECKING without asserts is a little unusual,
however, we shouldn't be producing any warnings from such a build.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_D-vgLEh7eO47p=73u1jWO78NWf6Qfv1FndY1kG-Q-jA@mail.gmail.com
We cannot rely on TransactionIdDidAbort here, since in general it may
report transactions that were in-progress at the time of an earlier hard
crash as not aborted, effectively behaving as if they were still in
progress even after crash recovery completes. Go back to defensively
verifying that xmax didn't commit instead.
Oversight in commit 79d4bf4e.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230104035636.hy5djyr2as4gbc4q@awork3.anarazel.de
Commit 4f627f89 switched SLRU truncation for multixacts back to being a
task performed during VACUUM, but missed some comments that continued to
reference truncation happening as part of checkpointing. Update those
comments now.
Also update comments that became obsolete when commit c3ffa731 changed
the way that vacuum_multixact_freeze_min_age is applied by VACUUM as it
computes its MultiXactCutoff cutoff (which is used by VACUUM to decide
what to freeze). Explain the same issues by referencing how OldestMxact
is the latest valid value that relminmxid can ever be advanced to at the
end of a VACUUM (following the work in commit 0b018fab).
Combine multiple LOCK TABLE commands to reduce the number of
round trips to the server. This is particularly helpful when
dumping from a remote server, but it seems useful even without
that. In particular, shortening the time from seeing a table
in pg_class to acquiring lock on it reduces the window for
trouble from concurrent DDL.
Aleksander Alekseev, reviewed by Fabrízio de Royes Mello,
Gilles Darold, and Andres Freund
Discussion: https://postgr.es/m/CAJ7c6TO4z1+OBa-R+fC8FnaUgbEWJUf2Kq=nRngTW5EXtKru2g@mail.gmail.com
pg_xact lookups are relatively expensive. Move the xmin/xmax commit
status checks from the point that freeze plans are prepared to the point
that they're actually executed. Otherwise we'll repeat many commit
status checks whenever multiple successive VACUUM operations scan the
same pages and decide against freezing each time, which is a waste of
cycles.
Oversight in commit 1de58df4, which added page-level freezing.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkZpe4K6qMfEt8H4qYJCKc2R7TPvKsBva7jc9w7iGXQSw@mail.gmail.com
Improve comments added by commit 1de58df4 which describe the
lazy_scan_prune "freeze the page" path. These newly revised comments
are based on suggestions from Jeff Davis.
In passing, remove nearby visibility_cutoff_xid comments left over from
commit 6daeeb1f.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/ebc857107fe3edd422ef8a65191ca4a8da568b9b.camel@j-davis.com
Windows can enumerate the locales that are either installed or
supported by calling EnumSystemLocalesEx(), similar to what is already
done in the READ_LOCALE_A_OUTPUT switch. We can refactor some of the
logic already used in that switch into a new function
create_collation_from_locale().
The enumerated locales have BCP 47 shape, that is with a hyphen
between language and territory, instead of POSIX's underscore. The
created collations will retain the BCP 47 shape, but we will also
create a POSIX alias, so xx-YY will have an xx_YY alias.
A new test collate.windows.win1252 is added that is like
collate.linux.utf8.
Author: Juan Jose Santamaria Flecha <juanjo.santamaria@gmail.com>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/0050ec23-34d9-2765-9015-98c04f0e18ac@postgrespro.ru
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
When considering an empty grouping set, we fetched
phasedata->eqfunctions[-1]. Because the eqfunctions array is
palloc'd, that would always be an aset pointer in released versions,
and thus the code accidentally failed to malfunction (since it would
do nothing unless it found a null pointer). Nonetheless this seems
like trouble waiting to happen, so add a check for length == 0.
It's depressing that our valgrind testing did not catch this.
Maybe we should reconsider the choice to not mark that word NOACCESS?
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-vZuuPOZsKOYnSAaPYGKhmacxhki+vpOKk0O7rymccXQ@mail.gmail.com
The term "truncation" has been ambiguous since commit 10a8d13823 added
line pointer array truncation during heap pruning. Clear things up by
specifying that we're talking about rel truncation here, to match nearby
comments that apply to tuples with storage.
Don't allow VACUUM to WAL-log the value FrozenTransactionId as the
snapshotConflictHorizon of freezing or visibility map related WAL
records.
The only special XID value that's an allowable snapshotConflictHorizon
is InvalidTransactionId, which is interpreted as "record definitely
doesn't require a recovery conflict".
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznuNGSzF8v6OsgjaC5aYsb3cZ6HW6MLm30X0d65cmSH6A@mail.gmail.com
A refcursor variable that is bound to a specific query (by declaring
it with "CURSOR FOR") now chooses a portal name in the same way as an
unbound, plain refcursor variable. Its string value starts out as
NULL, and unless that's overridden by manual assignment, it will be
replaced by a unique-within-session portal name during OPEN.
The previous behavior was to initialize such variables to contain
their own name, resulting in that also being the portal name unless
the user overwrote it before OPEN. The trouble with this is that
it causes failures due to conflicting portal names if the same
cursor variable name is used in different functions. It is pretty
non-orthogonal to have bound and unbound refcursor variables behave
differently on this point, too, so let's change it.
This change can cause compatibility problems for applications that
open a bound cursor in a plpgsql function and then use it in the
calling code without explicitly passing back the refcursor value
(portal name). If the calling code simply assumes that the portal
name matches the called function's variable name, it will now fail.
That can be fixed by explicitly assigning a string value to the
refcursor variable before OPEN, e.g.
DECLARE myc CURSOR FOR SELECT ...;
BEGIN
myc := 'myc'; -- add this
OPEN myc;
We have no documentation examples showing the troublesome usage
pattern, so we can hope it's rare in practice.
Patch by me; thanks to Pavel Stehule and Jan Wieck for review.
Discussion: https://postgr.es/m/1465101.1667345983@sss.pgh.pa.us
Cirrus is about to shut down its macOS-on-Intel support, so it's time to
move our CI testing over to ARM instances. The Homebrew package manager
changed its default installation prefix for the new architecture, so a
couple of tests need tweaks to find binaries.
Back-patch to 15, where in-tree CI began.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20221122225744.GF11463%40telsasoft.com
When brin_minmax_multi_union merges summaries, we may end up with just a
single range after merge_overlapping_ranges. The summaries may contain
just one range each, and they may overlap (or be exactly the same).
With a single range there's no distance to calculate, but we happen to
call build_distances anyway - which is fine, we don't calculate the
distance in this case, except that with asserts this failed due to a
check there are at least two ranges.
The assert is unnecessarily strict, so relax it a bit and bail out if
there's just a single range. The relaxed assert would be enough, but
this way we don't allocate unnecessary memory for distance.
Backpatch to 14, where minmax-multi opclasses were introduced.
Reported-by: Jaime Casanova
Backpatch-through: 14
Discussion: https://postgr.es/m/YzVA55qS0hgz8P3r@ahch-to
f193883 has been incorrectly setting up the precision used in the
timestamp compilations returned by the following functions:
- LOCALTIME
- LOCALTIMESTAMP
- CURRENT_TIME
- CURRENT_TIMESTAMP
Specifying an out-of-range precision for CURRENT_TIMESTAMP and
LOCALTIMESTAMP was raising a WARNING without adjusting the precision,
leading to a subsequent error. LOCALTIME and CURRENT_TIME raised a
WARNING without an error, still the precision given to the internal
routines was not correct, so let's be clean.
Ian has reported the problems in timestamp.c, while I have noticed the
ones in date.c. Regression tests are added for all of them with
precisions high enough to provide coverage for the warnings, something
that went missing up to this commit.
Author: Ian Lawrence Barwick, Michael Paquier
Discussion: https://postgr.es/m/CAB8KJ=jQEnn9sYG+N752spt68wMrhmT-ocHCh4oeNmHF82QMWA@mail.gmail.com
New versions of perl trigger warnings within perl.h with our compiler
flags. At least -Wdeclaration-after-statement, -Wshadow=compatible-local are
known to be problematic.
To avoid these warnings, conditionally use #pragma GCC system_header before
including plperl.h.
Alternatively, we could add the include paths for problematic headers with
-isystem, but that is a larger hammer and is harder to search for.
A more granular alternative would be to use #pragma GCC diagnostic
push/ignored/pop, but gcc warns about unknown warnings being ignored, so every
to-be-ignored-temporarily compiler warning would require its own pg_config.h
symbol and #ifdef.
As the warnings are voluminous, it makes sense to backpatch this change. But
don't do so yet, we first want gather buildfarm coverage - it's e.g. possible
that some compiler claiming to be gcc compatible has issues with the pragma.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: Discussion: https://postgr.es/m/20221228182455.hfdwd22zztvkojy2@awork3.anarazel.de
Teach VACUUM to decide on whether or not to trigger freezing at the
level of whole heap pages. Individual XIDs and MXIDs fields from tuple
headers now trigger freezing of whole pages, rather than independently
triggering freezing of each individual tuple header field.
Managing the cost of freezing over time now significantly influences
when and how VACUUM freezes. The overall amount of WAL written is the
single most important freezing related cost, in general. Freezing each
page's tuples together in batch allows VACUUM to take full advantage of
the freeze plan WAL deduplication optimization added by commit 9e540599.
Also teach VACUUM to trigger page-level freezing whenever it detects
that heap pruning generated an FPI. We'll have already written a large
amount of WAL just to do that much, so it's very likely a good idea to
get freezing out of the way for the page early. This only happens in
cases where it will directly lead to marking the page all-frozen in the
visibility map.
In most cases "freezing a page" removes all XIDs < OldestXmin, and all
MXIDs < OldestMxact. It doesn't quite work that way in certain rare
cases involving MultiXacts, though. It is convenient to define "freeze
the page" in a way that gives FreezeMultiXactId the leeway to put off
the work of processing an individual tuple's xmax whenever it happens to
be a MultiXactId that would require an expensive second pass to process
aggressively (allocating a new multi is especially worth avoiding here).
FreezeMultiXactId is eager when processing is cheap (as it usually is),
and lazy in the event of an individual multi that happens to require
expensive second pass processing. This avoids regressions related to
processing of multis that page-level freezing might otherwise cause.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
Some compilers complain about sub_rteperminfos not being
initialized, evidently because they don't detect that it
is only used and set if isGeneralSelect is true.
Make it follow the long-established pattern for its
sibling variable sub_rtable.
Per reports from Pavel Stehule and the buildfarm.
Discussion: https://postgr.es/m/CAFj8pRDOvGOi-n616kM0Cc7qSbg_nGoS=-haB+D785sUXADqSg@mail.gmail.com
The modified error message for regcollationin failure includes
the database encoding, which it should've occurred to me is a
portability hazard for the regression tests. Adjust the test
so the expected output doesn't include that.
In passing, fix a comment typo introduced in b8c0ffbd2.
Per buildfarm.
Given the soft-input-error feature, we can reduce these functions
to be just thin wrappers around a soft-error call of the
corresponding datatype input function. This means less code and
more certainty that the to_reg* functions match the normal input
behavior.
Notably, it also means that they will accept numeric OID input,
which they didn't before. It's not clear to me if that omission
had more than laziness behind it, but it doesn't seem like
something we need to work hard to preserve.
Discussion: https://postgr.es/m/3910031.1672095600@sss.pgh.pa.us
This is not really complete, but it catches most cases of practical
interest. The main omissions are:
* regtype, regprocedure, and regoperator parse type names by
calling the main grammar, so any grammar-detected syntax error
will still be a hard error. Also, if one includes a type
modifier in such a type specification, errors detected by the
typmodin function will be hard errors.
* Lookup errors are handled just by passing missing_ok = true
to the relevant catalog lookup function. Because we've used
quite a restrictive definition of "missing_ok", this means that
edge cases such as "the named schema exists, but you lack
USAGE permission on it" are still hard errors.
It would make sense to me to replace most/all missing_ok
parameters with an escontext parameter and then allow these
additional lookup failure cases to be trapped too. But that's
a job for some other day.
Discussion: https://postgr.es/m/3342239.1671988406@sss.pgh.pa.us
This is slightly tedious because the adjustments cascade through
a couple of levels of subroutines, but it's not very hard.
I chose to avoid changing function signatures more than absolutely
necessary, by passing the escontext pointer in existing structs
where possible.
tsquery's nuisance NOTICEs about empty queries are suppressed in
soft-error mode, since they're not errors and we surely don't want
them to be shown to the user anyway. Maybe that whole behavior
should be reconsidered.
Discussion: https://postgr.es/m/3824377.1672076822@sss.pgh.pa.us
Historically these input functions just called strtoul or strtoull
and returned the result, with no error detection whatever. Upgrade
them to reject garbage input and out-of-range values, similarly to
our other numeric input routines.
To share the code for this with type oid, adjust the existing
"oidin_subr" to be agnostic about the SQL name of the type it is
handling, and move it to numutils.c; then clone it for 64-bit types.
Because the xid types previously accepted hex and octal input by
reason of calling strtoul[l] with third argument zero, I made the
common subroutine do that too, with the consequence that type oid
now also accepts hex and octal input. In view of 6fcda9aba, that
seems like a good thing.
While at it, simplify the existing over-complicated handling of
syntax errors from strtoul: we only need one ereturn not three.
Discussion: https://postgr.es/m/3526121.1672000729@sss.pgh.pa.us
When VACUUM determines that an existing MultiXact should use a freeze
plan that sets xmax to InvalidTransactionId, the original Multi may or
may not be before OldestMxact. Remove an incorrect assertion that
expected it to always be from before OldestMxact.
Oversight in commit 4ce3af.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/TYAPR01MB5866B24104FD80B5D7E65C3EF5ED9@TYAPR01MB5866.jpnprd01.prod.outlook.com
002_pg_upgrade.pl gains support for a new environment variable called
"filter_rules", that can be used to point to a file that includes a
set of custom regular expressions that would be applied to the dumps of
the origin and target clusters when doing a cross-version test (aka when
defining olddump and oldinstall), to give the possibility to reshape
dynamically the dumps in the same way as the internals of the buildfarm
code so as the tests are able to pass in scenarios where one expects
them to even if pg_dump generates slightly-different outputs depending
on the versions involved.
This option is not used when pg_upgrade runs with the same version for
the origin and target clusters, and it is the last piece I see as
required to be able to plug-in more efficiently the TAP tests of
pg_upgrade with the buildfarm or just a CI.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
This option extracts (potentially decompressing) full-page images
included in WAL records into a given target directory. These images are
subject to the same filtering rules as the normal display of the WAL
records, hence with --relation one can for example extract only the FPIs
issued on the relation defined. By default, the records are printed or
their stats computed (--stats), using --quiet would only save the images
without any output generated.
This is a tool aimed mostly for very experienced users, useful for
fixing page-level corruption or just analyzing the past state of a page,
and there were no easy way to do that with the in-core tools up to now
when looking at WAL.
Each block is saved in a separate file, to ease their manipulation, with
the file respecting <lsn>.<ts>.<db>.<rel>.<blk>_<fork> with as format.
For instance, 00000000-010000C0.1663.1.6117.123_main refers to:
- WAL record LSN in hexa format (00000000-010000C0).
- Tablespace OID (1663).
- Database OID (1).
- Relfilenode (6117).
- Block number (123).
- Fork name of the file this block came from (_main).
Author: David Christensen
Reviewed-by: Sho Kato, Justin Pryzby, Bharath Rupireddy, Matthias van de
Meent
Discussion: https://postgr.es/m/CAOxo6XKjQb2bMSBRpePf3ZpzfNTwjQUc4Tafh21=jzjX6bX8CA@mail.gmail.com
This enables streaming or serializing changes immediately in logical
decoding. This parameter is intended to be used to test logical decoding
and replication of large transactions for which otherwise we need to
generate the changes till logical_decoding_work_mem is reached.
This helps in reducing the timing of existing tests related to logical
replication of in-progress transactions and will help in writing tests for
for the upcoming feature for parallelly applying large in-progress
transactions.
Author: Shi yu
Reviewed-by: Sawada Masahiko, Shveta Mallik, Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi
Discussion: https://postgr.es/m/OSZPR01MB63104E7449DBE41932DB19F1FD1B9@OSZPR01MB6310.jpnprd01.prod.outlook.com
f4f2f2b was doing a sequential scan of pg_class before checking if a
relation had attributes dependent on aclitem as data typewhen building
the set of ALTER TABLE queries, but it would be costly on a regression
database.
While on it, make the query style more consistent with the rest.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20221223032724.GQ1153@telsasoft.com
While at it, use a common subroutine already.
This doesn't move the needle very far in terms of making these
functions non-throwing; the only case we're now able to trap is
numeric-OID-is-out-of-range. Still, it seems like a pretty
non-controversial step in that direction.
ed1a88dda added support functions for the ntile(), percent_rank() and
cume_dist() window functions but neglected to actually add these support
functions to the pg_proc entry for the corresponding window function.
Also, take this opportunity to add these window functions to one of the
regression tests added in ed1a88dda to give the support functions a little
bit of exercise. If I'd done that in the first place then the omission
would have been more obvious.
Bump the catversion, again.
The test added in commit e44dae07f9 has a thinko: it wants to read
info about a few WAL records, but it obtains the LSN of the final record
to read by asking for the WAL insert position; however,
pg_get_wal_records_info only accepts to read up to the flush position
(cf. IsFutureLSN()). In normal conditions there is no difference, since
the last record written by the preceding loop is known flushed and it's
the one the test wants; but it's possible to have some other process
insert another WAL record that isn't flushed, and that causes the whole
test to explode.
Fix by having pg_get_wal_records_info() read only up to the flushed
position. Backpatch to 15, which is where pg_walinspect appeared.
Author: Karina Litskevich <litskevichkarina@gmail.com>
Discussion: https://postgr.es/m/a5559c95-52c3-5eea-cd63-9b4f1c70ff96@gmail.com
Fix incorrect code which was trying to convert a Bitmapset of columns at
the attnums according to a parent table and transform them into the
equivalent Bitmapset with same attnums according to the given child table.
This code is new as of a61b1f748 and was failing to do the correct
translation when there was an intermediate parent table between 'rel' and
'top_parent_rel'.
Reported-by: Ranier Vilela
Author: Richard Guo, Amit Langote
Discussion: https://postgr.es/m/CAEudQArohfB_Gy%2BhcH2-bANUkxgjJiP%3DABq01_LgTNTbcNijag%40mail.gmail.com
An epoll fd belonging to the parent should be closed in the child. A
kqueue fd is automatically closed by fork(), but we should still adjust
our counter. For poll and Windows systems, nothing special is required.
On all systems we free the memory.
No caller yet, but we'll need this if we start using WaitEventSet in the
postmaster as planned.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
At the time of commit 6a2a70a02 we didn't use latch infrastructure in
the postmaster. We're planning to start doing that, so we'd better make
sure that the signalfd inherited from a postmaster is not duplicated and
then leaked in the child.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
To be able to handle incoming connections on a server socket with
the WaitEventSet API, we'll need a new kind of event to indicate that
the the socket is ready to accept a connection.
On Unix, it's just the same as WL_SOCKET_READABLE, but on Windows there
is a different underlying kernel event that we need to map our
abstraction to.
No user yet, but a proposed patch would use this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
The regression test suite includes a table called "tab_core_types" that
has one attribute based on the type "aclitem". Keeping this attribute
as-is causes hard failures when running pg_upgrade with an origin on
~15. This commit updates upgrade_adapt.sql to automatically detect the
tables with such attributes and switch them to text so as pg_upgrade
is able to go through its run.
This does not provide the same detection coverage as pg_upgrade, where
we are able to find out aclitems used in arrays, domains or even
composite types, but this is (I guess) enough for most things like an
instance that had installcheck run on before the upgrade with a dump
generated from it.
Note that the buildfarm code has taken the simplest approach of just
dropping "tab_core_types", so what we have here is more modular.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
The query used to disable WITH OIDS in all the relations making use of
it was checking for materialized views, but this is not a supported
operation. On the contrary, this needs to be done on foreign tables.
While on it, use quote_ident() in the ALTER TABLE strings built on the
relation name.
Author: Anton A. Melnikov, Michael Paquier
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
Backpatch-through: 12
Three error strings used with cache lookup failures were referring to
incorrect object types for ACL checks:
- Schemas
- Types
- Foreign Servers
There errors should never be triggered, but if they do incorrect
information would be reported.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221222153041.GN1153@telsasoft.com
Backpatch-through: 11
The former name was discussed as being confusing, so use "split", as per
a suggestion from Magnus Hagander.
While on it, one of the output arguments is renamed from "segno" to
"segment_number", as per a suggestion from Kyotaro Horiguchi.
The documentation is updated to reflect all these changes.
Bump catalog version.
Author: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CABUevEytQVaOOhGdoh0D7hGwe3fuKcRF6NthsSW7ww04EmtFgQ@mail.gmail.com
WindowFuncs such as row_number() don't care if it's called with ROWS
UNBOUNDED PRECEDING AND CURRENT ROW or with RANGE UNBOUNDED PRECEDING AND
CURRENT ROW. The latter is less efficient as the RANGE option requires
that the executor check for peer rows, so using the ROW option instead
would cause less overhead. Because RANGE is part of the default frame
options for WindowClauses, it means WindowAgg is, by default, working much
harder than it needs to for window functions where the ROWS / RANGE option
has no effect on the window function's result.
On a test query from the discussion thread, a performance improvement of
344% was seen by using ROWS instead of RANGE.
Here we add a new support function node type to allow support functions to
be called for window functions so that the most optimal version of the
frame options can be set. The planner has been adjusted so that the frame
options are changed only if all window functions sharing the same window
clause agree on what the optimized frame options are.
Here we give the ability for row_number(), rank(), dense_rank(),
percent_rank(), cume_dist() and ntile() to alter their WindowClause's
frameOptions.
Reviewed-by: Vik Fearing, Erwin Brandstetter, Zhihong Yu
Discussion: https://postgr.es/m/CAGHENJ7LBBszxS+SkWWFVnBmOT2oVsBhDMB1DFrgerCeYa_DyA@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvohAKEtTXxq7Pc-ic2dKT8oZfbRKeEJP64M0B6+S88z+A@mail.gmail.com
Use C99 designated initializer syntax for the array elements, instead of
writing the enumerator name and position in a comment. Replace nkeys
and key with a local variadic macro, for a shorter notation.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKGKdpDjKL2jgC-GpoL4DGZU1YPqnOFHbDqFkfRQcPaR5DQ%40mail.gmail.com
Perform a failsafe check every time VACUUM's first heap scan scans a
further FAILSAFE_EVERY_PAGES pages, rather than using an approach based
on the number of physical blocks that our current blkno is from the
blkno at the time of the previous failsafe check. That way VACUUM will
perform a failsafe check every time it has scanned a uniform number of
pages, without it mattering when or how VACUUM skipped pages using the
visibility map.
Sami Imseih, with changes to FAILSAFE_EVERY_PAGES comments added by me.
Author: Sami Imseih <simseih@amazon.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/401CE010-4049-4B94-9961-0B610A5D254D%40amazon.com
Use a dedicated struct for the XID/MXID cutoffs used by VACUUM, such as
FreezeLimit and OldestXmin. This state is initialized in vacuum.c, and
then passed around by code from vacuumlazy.c to heapam.c freezing
related routines. The new convention is that everybody works off of the
same cutoff state, which is passed around via pointers to const.
Also simplify some of the logic for dealing with frozen xmin in
heap_prepare_freeze_tuple: add dedicated "xmin_already_frozen" state to
clearly distinguish xmin XIDs that we're going to freeze from those that
were already frozen from before. That way the routine's xmin handling
code is symmetrical with the existing xmax handling code. This is
preparation for an upcoming commit that will add page level freezing.
Also refactor the control flow within FreezeMultiXactId(), while adding
stricter sanity checks. We now test OldestXmin directly, instead of
using FreezeLimit as an inexact proxy for OldestXmin. This is further
preparation for the page level freezing work, which will make the
function's caller cede control of page level freezing to the function
where appropriate (where heap_prepare_freeze_tuple sees a tuple that
happens to contain a MultiXactId in its xmax).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CAH2-WznS9TxXmz2_=SY+SyJyDFbiOftKofM9=aDo68BbXNBUMA@mail.gmail.com
perform_pullup_replace_vars() knows how to scan the whole parent
query tree when we are replacing Vars during a subquery flattening
operation. However, for the specific case of flattening a
UNION ALL leaf query, that's mostly wasted work: the only place
where relevant Vars could exist is in the AppendRelInfo that we
just made for this leaf. Teaching perform_pullup_replace_vars()
to just deal with that and exit is worthwhile because, if we have
N such subqueries to pull up, we were spending O(N^2) work uselessly
mutating the AppendRelInfos for all the other subqueries.
While we're at it, avoid calling substitute_phv_relids if there are no
PlaceHolderVars, and remove an obsolete check of parse->hasSubLinks.
Andrey Lepikhov and Tom Lane
Discussion: https://postgr.es/m/703c09a2-08f3-d2ec-b33d-dbecd62428b8@postgrespro.ru
Andrey Lepikhov demonstrated a case where we spend an unreasonable
amount of time in pull_up_subqueries(). Not only is that recursing
with no explicit check for stack overrun, but the code seems not
interruptable by control-C. Let's stick a CHECK_FOR_INTERRUPTS
there, along with sprinkling some stack depth checks.
An actual fix for the excessive time consumption seems a bit
risky to back-patch; but this isn't, so let's do so.
Discussion: https://postgr.es/m/703c09a2-08f3-d2ec-b33d-dbecd62428b8@postgrespro.ru
The previous coding of VA_ARGS_NARGS() always returned 1 on Visual
Studio, because it treats __VA_ARGS__ as a single token unless you jump
through extra hoops. Newer compilers have an option to fix that. Add a
comment about that so that we can remember to clean this up in the
future when our minimum MSVC version advances.
Author: Victor Spirin <v.spirin@postgrespro.ru>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/f450fc57-a147-19d0-e50c-33571c52cc13%40postgrespro.ru
A bitwise operator was getting used on two bools in
ATAddCheckConstraint() to track if constraints should be merged or not
with the existing ones of a relation, though obviously this should use
a boolean OR operator. This led to the same result, but let's be
clean.
Oversight in 074c5cf.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAp2R2fbbi0OHHhv_n4=Ch0t1VtjObR9YMqtGKHJ+faUFQ@mail.gmail.com
This introduces palloc_aligned() and MemoryContextAllocAligned() which
allow callers to obtain memory which is allocated to the given size and
also aligned to the specified alignment boundary. The alignment
boundaries may be any power-of-2 value. Currently, the alignment is
capped at 2^26, however, we don't expect values anything like that large.
The primary expected use case is to align allocations to perhaps CPU
cache line size or to maybe I/O page size. Certain use cases can benefit
from having aligned memory by either having better performance or more
predictable performance.
The alignment is achieved by requesting 'alignto' additional bytes from
the underlying allocator function and then aligning the address that is
returned to the requested alignment. This obviously does waste some
memory, so alignments should be kept as small as what is required.
It's also important to note that these alignment bytes eat into the
maximum allocation size. So something like:
palloc_aligned(MaxAllocSize, 64, 0);
will not work as we cannot request MaxAllocSize + 64 bytes.
Additionally, because we're just requesting the requested size plus the
alignment requirements from the given MemoryContext, if that context is
the Slab allocator, then since slab can only provide chunks of the size
that's specified when the slab context is created, then this is not going
to work. Slab will generate an error to indicate that the requested size
is not supported.
The alignment that is requested in palloc_aligned() is stored along with
the allocated memory. This allows the alignment to remain intact through
repalloc() calls.
Author: Andres Freund, David Rowley
Reviewed-by: Maxim Orlov, Andres Freund, John Naylor
Discussion: https://postgr.es/m/CAApHDvpxLPUMV1mhxs6g7GNwCP6Cs6hfnYQL5ffJQTuFAuxt8A%40mail.gmail.com
This is the guts of float4in, callable as a routine to input floats,
which will be useful in an upcoming patch for allowing soft errors in
the seg module's input function.
A similar operation was performed some years ago for float8in in
commit 50861cd683.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/cee4e426-d014-c0b7-aa22-a659f2cd9130@dunslane.net
d21ded75f changed the way slab.c works but introduced a bug that meant we
could end up with the slab's curBlocklistIndex pointing to the wrong list.
The condition which was checking for this was failing to account for two
things:
1. The curBlocklistIndex could be 0 as we've currently got no non-full
blocks to put chunks on. In this case, the dlist_is_empty() check cannot
be performed as there can be any number of completely full blocks at that
index.
2. The curBlocklistIndex may be greater than the index we just moved the
block onto. Since we need to ensure we fill up fuller blocks first, we
must reset curBlocklistIndex when changing any blocklist element that's
less than the curBlocklistIndex too.
Reported-by: Takamichi Osumi
Discussion: https://postgr.es/m/TYCPR01MB8373329C6329768D7E093D68EDEB9@TYCPR01MB8373.jpnprd01.prod.outlook.com
This commit changes some of the bbstreamer files and pg_dump to use the
same style as a few other places (like common/compression.c), where the
name of the compression method is not part of the string, but an
argument of it. This reduces a bit the translation work with less
string patterns.
Discussion: https://postgr.es/m/Y5/5tdK+4n3clvtU@paquier.xyz
This shaves some code by replacing the combinations of
CreateTemplateTupleDesc()/TupleDescInitEntry() hardcoding a mapping of
the attributes listed in pg_proc.dat by get_call_result_type() to build
the TupleDesc needed for the rows generated.
get_call_result_type() is more expensive than the former style, but this
removes some duplication with the lists of OUT parameters (pg_proc.dat
and the attributes hardcoded in these code paths). This is applied to
functions that are not considered as critical (aka that could be called
repeatedly for monitoring purposes).
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACV23HW5HP5hFjd89FNS-z5X8r2jNXdMXcpN2BgTtKd87w@mail.gmail.com
Commit 927f453a9 disallowed batching added by commit b663a4136 to be
used for the inserts performed as part of cross-partition updates of
partitioned tables, mainly because the previous code in
nodeModifyTable.c couldn't handle pending inserts into foreign-table
partitions that are also UPDATE target partitions. But we don't have
such a limitation anymore (cf. commit ffbb7e65a), so let's allow for
this by removing from execPartition.c the restriction added by commit
927f453a9 that batching is only allowed if the query command type is
CMD_INSERT.
In postgres_fdw, since commit 86dc90056 changed it to effectively
disable cross-partition updates in the case where a foreign-table
partition chosen to insert rows into is also an UPDATE target partition,
allow batching in the case where a foreign-table partition chosen to
do so is *not* also an UPDATE target partition. This is enabled by the
"batch_size" option added by commit b663a4136, which is disabled by
default.
This patch also adjusts the test case added by commit 927f453a9 to
confirm that the inserts performed as part of a cross-partition update
of a partitioned table indeed uses batching.
Amit Langote, reviewed and/or tested by Georgios Kokolatos, Zhihong Yu,
Bharath Rupireddy, Hou Zhijie, Vignesh C, and me.
Discussion: http://postgr.es/m/CA%2BHiwqH1Lz1yJmPs%3DaD-pzd_HLLynLHvq5iYeT9mB0bBV7oJ6w%40mail.gmail.com
1349d279 added query planner support to allow more efficient execution of
aggregate functions which have an ORDER BY or a DISTINCT clause. Prior to
that commit, the planner would only request that the lower planner produce
a plan with the order required for the GROUP BY clause and it would be
left up to nodeAgg.c to perform the final sort of records within each
group so that the aggregate transition functions were called in the
correct order. Now that the planner requests the lower planner produce a
plan with the GROUP BY and the ORDER BY / DISTINCT aggregates in mind,
there is the possibility that the planner chooses a plan which could be
less efficient than what would have been produced before 1349d279.
While developing 1349d279, I had in mind that Incremental Sort would help
us in cases where an index exists only on the GROUP BY column(s).
Incremental Sort would just replace the implicit tuplesorts which are
being performed in nodeAgg.c. However, because the planner has the
flexibility to instead choose a plan which just performs a full sort on
both the GROUP BY and ORDER BY / DISTINCT aggregate columns, there is
potential for the planner to make a bad choice. The costing for
Incremental Sort is not perfect as it assumes an even distribution of rows
to sort within each sort group.
Here we add an escape hatch in the form of the enable_presorted_aggregate
GUC. This will allow users to get the pre-PG16 behavior in cases where
they have no other means to convince the query planner to produce a plan
which only sorts on the GROUP BY column(s).
Discussion: https://postgr.es/m/CAApHDvr1Sm+g9hbv4REOVuvQKeDWXcKUAhmbK5K+dfun0s9CvA@mail.gmail.com
Slab has traditionally been fairly slow when compared with the AllocSet or
Generation memory allocators. Part of this slowness came from having to
write out an entire block when we allocate a new block in order to
populate the free list indexes within the block's memory. Additional
slowness came from having to move a block onto another dlist each time we
palloc or pfree a chunk from it.
Here we optimize both of those cases and do a little bit extra to improve
the performance of the slab allocator.
Here, instead of writing out the free list indexes when allocating a new
block, we introduce the concept of "unused" chunks. When a block is first
allocated all chunks are unused. These chunks only make it onto the
free list when they are pfree'd. When allocating new chunks on an
existing block, we have the choice of consuming a chunk from the free list
or an unused chunk. When both exist, we opt to use one from the free
list, as these have been used already and the memory of them is more
likely to be cached by the CPU.
Here we also reduce the number of block lists from there being one for
every possible value of free chunks on a block to just having a small
fixed number of block lists. We keep the 0th block list for completely
full blocks and anything else stores blocks for some range of free chunks
with fuller blocks appearing on lower block list array elements. This
reduces how often we must move a block to another list when we allocate or
free chunks, but still allows us to prefer to put new chunks on fuller
blocks and perhaps allow blocks with fewer chunks to be free'd later
once all their remaining chunks have been pfree'd.
Additionally, we now store a list of "emptyblocks", which are blocks that
no longer contain any allocated chunks. We now keep up to 10 of these
around to avoid having to thrash malloc/free when allocation patterns
continually cause blocks to become free of any allocated chunks only to
allocate more chunks again. Now only once we have 10 of these, we free
the block. This does raise the high water mark for the total memory that
a slab context can consume. It does not seem entirely unreasonable that
we might one day want to make this a property of SlabContext rather than a
compile-time constant. Let's wait and see if there is any evidence to
support that this is required before doing it.
Author: Andres Freund, David Rowley
Tested-by: Tomas Vondra, John Naylor
Discussion: https://postgr.es/m/20210717194333.mr5io3zup3kxahfm@alap3.anarazel.de
This function takes in input a WAL segment name and returns a tuple made
of the segment sequence number (dependent on the WAL segment size of the
cluster) and its timeline, as of a thin SQL wrapper around the existing
XLogFromFileName().
This function has multiple usages, like being able to compile a LSN from
a file name and an offset, or finding the timeline of a segment without
having to do to some maths based on the first eight characters of the
segment.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Kyotaro Horiguchi, Maxim Orlov, Michael
Paquier
Discussion: https://postgr.es/m/CALj2ACWV=FCddsxcGbVOA=cvPyMr75YCFbSQT6g4KDj=gcJK4g@mail.gmail.com
SCRAM_KEY_LEN was a variable used in the internal routines of SCRAM to
size a set of fixed-sized arrays used in the SHA and HMAC computations
during the SASL exchange or when building a SCRAM password. This had a
hard dependency on SHA-256, reducing the flexibility of SCRAM when it
comes to the addition of more hash methods. A second issue was that
SHA-256 is assumed as the cryptohash method to use all the time.
This commit renames SCRAM_KEY_LEN to a more generic SCRAM_KEY_MAX_LEN,
which is used as the size of the buffers used by the internal routines
of SCRAM. This is aimed at tracking centrally the maximum size
necessary for all the hash methods supported by SCRAM. A global
variable has the advantage of keeping the code in its simplest form,
reducing the need of more alloc/free logic for all the buffers used in
the hash calculations.
A second change is that the key length (SHA digest length) and hash
types are now tracked by the state data in the backend and the frontend,
the common portions being extended to handle these as arguments by the
internal routines of SCRAM. There are a few RFC proposals floating
around to extend the SCRAM protocol, including some to use stronger
cryptohash algorithms, so this lifts some of the existing restrictions
in the code.
The code in charge of parsing and building SCRAM secrets is extended to
rely on the key length and on the cryptohash type used for the exchange,
assuming currently that only SHA-256 is supported for the moment. Note
that the mock authentication simply enforces SHA-256.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Jonathan Katz
Discussion: https://postgr.es/m/Y5k3Qiweo/1g9CG6@paquier.xyz
A new function pg_stat_get_backend_subxact() can be used to get
information about the number of subtransactions in the cache of
a particular backend and whether that cache has overflowed. This
can be useful for tracking down performance problems that can
result from overflowed snapshots.
Dilip Kumar, reviewed by Zhihong Yu, Nikolay Samokhvalov,
Justin Pryzby, Nathan Bossart, Ashutosh Sharma, Julien
Rouhaud. Additional design comments from Andres Freund,
Tom Lane, Bruce Momjian, and David G. Johnston.
Discussion: http://postgr.es/m/CAFiTN-ut0uwkRJDQJeDPXpVyTWD46m3gt3JDToE02hTfONEN=Q@mail.gmail.com
While fooling with my pet outer-join-variables patch, I discovered
that the test case I added in commit 11086f2f2 no longer demonstrates
what it's supposed to. The idea is to tempt the planner to reverse
the order of the two outer joins, which would leave noplace to
correctly evaluate the WHERE clause that's inserted between them.
Before the addition of the delay_upper_joins mechanism, it would
have taken the bait.
However, subsequent improvements broke the test in two different ways.
First, we now recognize the IS NULL coding pattern as an antijoin, and
we won't re-order antijoins; even if we did, the IS NULL test clauses
get removed so there would be no opportunity for them to misbehave.
Second, the planner now discovers that nested parameterized indexscans
are a lot cheaper than the double hash join it used back in the day,
and that approach doesn't want to re-order the joins anyway. Thus,
in HEAD the test passes even if one dikes out delay_upper_joins.
To fix, change the IS NULL tests to COALESCE clauses, which produce
the same results but the planner isn't smart enough to convert them
to antijoins. It'll still go for parameterized indexscans though,
so drop the index enabling that (don't know why I added that in the
first place), and disable nestloop joining just to be sure.
This time around, add an EXPLAIN to make the choice of plan visible.
Such references failed with "cache lookup failed for type 0"
because we didn't resolve the type of the CYCLE column until after
analyzing the CTE's query. We can just move that processing
to before the recursive parse_sub_analyze call, though.
While here, invent a couple of local variables to make this
code less egregiously wider-than-80-columns.
Per bug #17723 from Vik Fearing. Back-patch to v14 where
the CYCLE feature was added.
Discussion: https://postgr.es/m/17723-2c4985ff111e7bba@postgresql.org
The environment variable PG_TEST_PG_UPGRADE_MODE can be set to
override the default transfer mode for the pg_upgrade tests.
(Automatically running the pg_upgrade tests for all supported modes
would be too slow.)
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/50a97009-8ff9-ca4d-a0f6-6086a6775a5b%40enterprisedb.com
This option selects the default transfer mode. Having an explicit
option is handy to make scripts and tests more explicit. It also
makes it easier to talk about a "copy" mode rather than "the default
mode" or something like that, since until now the default mode didn't
have an externally visible name.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/50a97009-8ff9-ca4d-a0f6-6086a6775a5b%40enterprisedb.com
This ancient bit of code was summarily trapping any ereport longjmp
whatsoever and assuming that it must represent an invalid-XML report.
It's not really appropriate to handle OOM-like situations that way:
maybe the input is valid or maybe not, but we couldn't find out.
And it'd be a seriously bad idea to ignore, say, a query cancel
error that way. (Perhaps that can't happen because there is no
CHECK_FOR_INTERRUPTS anywhere within xml_parse, but even if that's
true today it's obviously a very fragile assumption.)
But in the wake of the previous commit, we can drop the PG_TRY
here altogether, and use the soft error mechanism to catch only
the kinds of errors that are legitimate to treat as invalid-XML.
(This is our first use of the soft error mechanism for something
not directly related to a datatype input function. It won't be
the last.)
xml_is_document can be converted in the same way. That one is
not actively broken, because it was checking specifically for
ERRCODE_INVALID_XML_DOCUMENT rather than trapping everything;
but the code is still shorter and probably faster this way.
Discussion: https://postgr.es/m/3564577.1671142683@sss.pgh.pa.us
The key idea here is that xml_parse must distinguish hard errors
from soft errors. We want to throw a hard error for libxml
initialization failures: those might be out-of-memory, or something
else, but in any case they are not the fault of the input string.
If we get to the point of parsing the input, and something goes
wrong, we can fairly consider that to mean bad input.
One thing that arguably does mean bad input, but I didn't trouble
to handle softly, is encoding conversion failure while converting
the server encoding to UTF8. This might be something to improve
later, but it seems like a pretty low-probability scenario.
Discussion: https://postgr.es/m/3564577.1671142683@sss.pgh.pa.us
When incremental sorts were added in v13 a 1.5x pessimism factor was added
to the cost modal. Seemingly this was done because the cost modal only
has an estimate of the total number of input rows and the number of
presorted groups. It assumes that the input rows will be evenly
distributed throughout the presorted groups. The 1.5x pessimism factor
was added to slightly reduce the likelihood of incremental sorts being
used in the hope to avoid performance regressions where an incremental
sort plan was picked and turned out slower due to a large skew in the
number of rows in the presorted groups.
An additional quirk with the path generation code meant that we could
consider both a sort and an incremental sort on paths with presorted keys.
This meant that with the pessimism factor, it was possible that we opted
to perform a sort rather than an incremental sort when the given path had
presorted keys.
Here we remove the 1.5x pessimism factor to allow incremental sorts to
have a fairer chance at being chosen against a full sort.
Previously we would generally create a sort path on the cheapest input
path (if that wasn't sorted already) and incremental sort paths on any
path which had presorted keys. This meant that if the cheapest input path
wasn't completely sorted but happened to have presorted keys, we would
create a full sort path *and* an incremental sort path on that input path.
Here we change this logic so that if there are presorted keys, we only
create an incremental sort path, and create sort paths only when a full
sort is required.
Both the removal of the cost pessimism factor and the changes made to the
path generation make it more likely that incremental sorts will now be
chosen. That, of course, as with teaching the planner any new tricks,
means an increased likelihood that the planner will perform an incremental
sort when it's not the best method. Our standard escape hatch for these
cases is an enable_* GUC. enable_incremental_sort already exists for
this.
This came out of a report by Pavel Luzanov where he mentioned that the
master branch was choosing to perform a Seq Scan -> Sort -> Group
Aggregate for his query with an ORDER BY aggregate function. The v15 plan
for his query performed an Index Scan -> Group Aggregate, of course, the
aggregate performed the final sort internally in nodeAgg.c for the
aggregate's ORDER BY. The ideal plan would have been to use the index,
which provided partially sorted input then use an incremental sort to
provide the aggregate with the sorted input. This was not being chosen
due to the pessimism in the incremental sort cost modal, so here we remove
that and rationalize the path generation so that sort and incremental sort
plans don't have to needlessly compete. We assume that it's senseless
to ever use a full sort on a given input path where an incremental sort
can be performed.
Reported-by: Pavel Luzanov
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/9f61ddbf-2989-1536-b31e-6459370a6baa%40postgrespro.ru
It seems that drop-index-concurrently-1 has started to forget what it was
originally meant to be testing. d2d8a229b, which added incremental sorts
changed the expected plan to be an Index Scan plan instead of a Seq Scan
plan. This occurred as the primary key index of the table in question
provided presorted input and, because that index happened to be the
cheapest input path due to enable_seqscan being disabled, the incremental
sort changes just added a Sort on top of that. It seems based on the name
of the PREPAREd statement that the intention here is that the query
produces a seqscan plan.
The reason this test has become broken seems to be due to how the test was
originally coded. The test was trying to force a seqscan plan by
performing some casting to make it so the test_dc index couldn't be used
to perform the required filtering. Trying to coax the planner into using
a plan which has costed in a disable_cost seems like it's always going to
be flakey as small changes in costs are drowned out by the large
disable_cost combined with add_path's STD_FUZZ_FACTOR. Here we get rid of
the casts that we're using to try to trick the planner into a seqscan and
instead toggle enable_seqscan as and when required to get the desired
plan.
Additionally, rename a few things in the test and add some additional
wording to the comments to try and make it more clear in the future what
we expect this test to be doing.
Discussion: https://postgr.es/m/CAApHDvrbDhObhLV+=U_K_-t+2Av2av1aL9d+2j_3AO-XndaviA@mail.gmail.com
Backpatch-through: 13, where d2d8a229b changed the expected test output
The building of command completion tags could often be seen showing up in
profiles when running high tps workloads.
The query completion tags were being built with snprintf, which is slow at
the best of times when compared with more manual ways of formatting
strings. Here we introduce BuildQueryCompletionString() to do this job
for us. We also now store the completion tag's strlen in the
CommandTagBehavior struct so that we can quickly memcpy this number of
bytes into the completion tag string. Appending the rows affected is done
via pg_ulltoa_n. BuildQueryCompletionString returns the length of the
built string. This saves us having to call strlen to figure out how many
bytes to pass to pq_putmessage().
Author: David Rowley, Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/CAHoyFK-Xwqc-iY52shj0G+8K9FJpse+FuZ36XBKy78wDVnd=Qg@mail.gmail.com
This is mostly straightforward, except that if the range type
has a canonical function, that might throw an error during range
input. (Such errors probably only occur for edge cases: in the
in-core canonical functions, it happens only if a bound has the
maximum valid value for the underlying type.) Hence, this patch
extends the soft-error regime to allow canonical functions to
return errors softly as well. Extensions implementing range
canonical functions will need modification anyway because of the
API change for range_serialize(); while at it, they might want
to do something similar to what's been done here in the in-core
canonical functions.
Discussion: https://postgr.es/m/3284599.1671075185@sss.pgh.pa.us
Because we added StaticAssertStmt() first before StaticAssertDecl(),
some uses as well as the instructions in c.h are now a bit backwards
from the "native" way static assertions are meant to be used in C.
This updates the guidance and moves some static assertions to better
places.
Specifically, since the addition of StaticAssertDecl(), we can put
static assertions at the file level. This moves a number of static
assertions out of function bodies, where they might have been stuck
out of necessity, to perhaps better places at the file level or in
header files.
Also, when the static assertion appears in a position where a
declaration is allowed, then using StaticAssertDecl() is more native
than StaticAssertStmt().
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/941a04e7-dd6f-c0e4-8cdf-a33b3338cbda%40enterprisedb.com
35f059e9bd put the provariadic sanity
check into type_sanity.sql, even though it's not about types, and
moreover in the middle of some connected test group, which makes it
all very confusing. Move it to opr_sanity.sql, where it is in better
company.
Convert assorted internal-ish datatypes, namely aclitemin,
int2vectorin, oidin, oidvectorin, pg_lsn_in, pg_snapshot_in,
and tidin to the new style.
(Some others you might expect to find in this group, such as
cidin and xidin, need no changes because they never throw
errors at all. That seems a little cheesy ... but it is not in
the charter of this patch series to add new error conditions.)
Amul Sul, minor mods by me
Discussion: https://postgr.es/m/CAAJ_b97KeDWUdpTKGOaFYPv0OicjOu6EW+QYWj-Ywrgj_aEy1g@mail.gmail.com
Convert box_in, circle_in, line_in, lseg_in, path_in, point_in,
and poly_in to the new style.
line_in still throws hard errors for overflows/underflows that can occur
when the input is specified as two points rather than in the canonical
"Ax + By + C = 0" style. I'm not too concerned about that: it won't be
reached in normal dump/restore cases, and it's fairly debatable that
such conversion should ever have been made part of a type input function
in the first place. But in any case, I don't want to extend the soft
error conventions into float.h without more discussion than this patch
has had.
Amul Sul, minor mods by me
Discussion: https://postgr.es/m/CAAJ_b97KeDWUdpTKGOaFYPv0OicjOu6EW+QYWj-Ywrgj_aEy1g@mail.gmail.com
Add support for hexadecimal, octal, and binary integer literals:
0x42F
0o273
0b100101
per SQL:202x draft.
This adds support in the lexer as well as in the integer type input
functions.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
This referred to the size of the buffers for k_ipad and k_opad in HMAC
computations. This is unused since e6bdfd9, where SCRAM has switched to
the cryptohash routines for its HMAC calculations rather than its own
maths.
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/Y5gGMjXhyp0oK0mH@paquier.xyz
Commits f92944137 et al. made IsInTransactionBlock() set the
XACT_FLAGS_NEEDIMMEDIATECOMMIT flag before returning "false",
on the grounds that that kept its API promises equivalent to those of
PreventInTransactionBlock(). This turns out to be a bad idea though,
because it allows an ANALYZE in a pipelined series of commands to
cause an immediate commit, which is unexpected.
Furthermore, if we return "false" then we have another issue,
which is that ANALYZE will decide it's allowed to do internal
commit-and-start-transaction sequences, thus possibly unexpectedly
committing the effects of previous commands in the pipeline.
To fix the latter situation, invent another transaction state flag
XACT_FLAGS_PIPELINING, which explicitly records the fact that we
have executed some extended-protocol command and not yet seen a
commit for it. Then, require that flag to not be set before allowing
InTransactionBlock() to return "false".
Having done that, we can remove its setting of NEEDIMMEDIATECOMMIT
without fear of causing problems. This means that the API guarantees
of IsInTransactionBlock now diverge from PreventInTransactionBlock,
which is mildly annoying, but it seems OK given the very limited usage
of IsInTransactionBlock. (In any case, a caller preferring the old
behavior could always set NEEDIMMEDIATECOMMIT for itself.)
For consistency also require XACT_FLAGS_PIPELINING to not be set
in PreventInTransactionBlock. This too is meant to prevent commands
such as CREATE DATABASE from silently committing previous commands
in a pipeline.
Per report from Peter Eisentraut. As before, back-patch to all
supported branches (which sadly no longer includes v10).
Discussion: https://postgr.es/m/65a899dd-aebc-f667-1d0a-abb89ff3abf8@enterprisedb.com
Instead of half a dozen of mostly-duplicate ExecGrant_Foo() functions,
write one common function ExecGrant_generic() that can handle most of
them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/22c7e802-4e7d-8d87-8b71-cba95e6f4bcf%40enterprisedb.com
jsonb_get_element() was incautious enough to use VARDATA() and
VARSIZE() directly on an arbitrary text Datum. That of course
fails if the Datum is short-header, compressed, or out-of-line.
The typical result would be failing to match any element of a
jsonb object, though matching the wrong one seems possible as well.
setPathObject() was slightly brighter, in that it used VARDATA_ANY
and VARSIZE_ANY_EXHDR, but that only kept it out of trouble for
short-header Datums. push_path() had the same issue. This could
result in faulty subscripted insertions, though keys long enough to
cause a problem are likely rare in the wild.
Having seen these, I looked around for unsafe usages in the rest
of the adt/json* files. There are a couple of places where it's not
immediately obvious that the Datum can't be compressed or out-of-line,
so I added pg_detoast_datum_packed() to cope if it is. Also, remove
some other usages of VARDATA/VARSIZE on Datums we just extracted from
a text array. Those aren't actively broken, but they will become so
if we ever start allowing short-header array elements, which does not
seem like a terribly unreasonable thing to do. In any case they are
not great coding examples, and they could also do with comments
pointing out that we're assuming we don't need pg_detoast_datum_packed.
Per report from exe-dealer@yandex.ru. Patch by me, but thanks to
David Johnston for initial investigation. Back-patch to v14 where
jsonb subscripting was introduced.
Discussion: https://postgr.es/m/205321670615953@mail.yandex.ru
If sendFileWithContent were used to send a file larger than the
bbsink buffer size, this would result in corruption. The only
files that are sent via sendFileWithContent are the backup label
file, the tablespace map file, and .done files for WAL segments
included in the backup. Of these, it seems that only the
tablespace_map file can become large enough to cause a problem,
and then only if you have a lot of tablespaces. If you do have
that situation, you might end up with a corrupted
tablespace_map file, which would be bad.
My commit bef47ff85d introduced
this problem.
Report and patch by Antonin Houska.
Discussion: http://postgr.es/m/15764.1670528645@antos
During ALTER TABLE execution, when prep-time handling of subcommands of
certain types determine that execution-time handling requires recursion,
they signal this by changing the subcommand type to a special value.
This can be done in a simpler way by using a separate flag introduced by
commit ec0925c22a, so do that.
Catversion bumped. It's not clear to me that ALTER TABLE subcommands
are stored anywhere in catalogs (CREATE FUNCTION rejects it in BEGIN
ATOMIC function bodies), but we do have both write and read support for
them, so be safe.
Discussion: https://postgr.es/m/20220929090033.zxuaezcdwh2fgfjb@alvherre.pgsql
3d14e17 has added support for this query but psql was not able to
complete it. Spotted while working on a different patch in the same
area.
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/Y3hw7yvG0VwpC1jq@paquier.xyz
This is straightforward as far as it goes. However, it does not
attempt to trap errors occurring during the execution of domain
CHECK constraints. Since those are general user-defined
expressions, the only way to do that would involve starting up a
subtransaction for each check. Of course the entire point of
the soft-errors feature is to not need subtransactions, so that
would be self-defeating. For now, we'll rely on the assumption
that domain checks are written to avoid throwing errors.
Discussion: https://postgr.es/m/1181028.1670635727@sss.pgh.pa.us
This requires a bit of further infrastructure-extension to allow
trapping errors reported by numeric_in and pg_unicode_to_server,
but otherwise it's pretty straightforward.
In the case of jsonb_in, we are only capturing errors reported
during the initial "parse" phase. The value-construction phase
(JsonbValueToJsonb) can also throw errors if assorted implementation
limits are exceeded. We should improve that, but it seems like a
separable project.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/3bac9841-fe07-713d-fa42-606c225567d6@dunslane.net
Formerly, semantic action functions for the JSON parser returned void,
so that there was no way for them to affect the parser's behavior.
That means in particular that they can't force an error exit except by
longjmp'ing. That won't do in the context of our project to make input
functions return errors softly. Hence, change them to return the same
JsonParseErrorType enum value as the parser itself uses. If an action
function returns anything besides JSON_SUCCESS, the parse is abandoned
and that error code is returned.
Action functions can thus easily return the same error conditions that
the parser already knows about. As an escape hatch for expansion, also
invent a code JSON_SEM_ACTION_FAILED that the core parser does not know
the exact meaning of. When returning this code, an action function
must use some out-of-band mechanism for reporting the error details.
This commit simply makes the API change and causes all the existing
action functions to return JSON_SUCCESS, so that there is no actual
change in behavior here. This is long enough and boring enough that
it seemed best to commit it separately from the changes that make
real use of the new mechanism.
In passing, remove a duplicate assignment of
transform_string_values_scalar.
Discussion: https://postgr.es/m/1436686.1670701118@sss.pgh.pa.us
We chose a specific wording of the not-implemented errors for
pseudotype I/O functions and other cases where there's little
value in implementing input and/or output. gtsvectorin never
got that memo though, nor did most of contrib. Make these all
fall in line, mostly because I'm a neatnik but also to remove
unnecessary translatable strings.
gbtreekey_in needs a bit of extra love since it supports
multiple SQL types. Sadly, gbtreekey_out doesn't have the
ability to do that, but I think it's unreachable anyway.
Noted while surveying datatype input functions to see what we
have left to fix.
Apparently anymultirange_in was written before we converted all
these pseudotype input functions to use a common macro, and it didn't
get fixed before committing. Sloppy merging probably explains its
unintuitive ordering, too, so rearrange.
Noted while surveying datatype input functions to see what we
have left to fix. I'm inclined to leave the pseudotypes as
throwing hard errors, because it's difficult to see a reason why
anyone would need something else. But in any case, if we want
to change that, we shouldn't have to change multiple copies of
the code.
9d9c02ccd added code to allow WindowAgg to take some shortcuts when a
monotonic WindowFunc reached some value that it could never come back
from due to the function's monotonic nature. That commit added a
runCondition field to WindowClause to store the condition which, when it
becomes false we can start taking shortcuts in nodeWindowAgg.c.
Here we fix an issue where subquery pullups didn't properly update the
runCondition to update the Vars to properly reference the new query level.
Here we also add a missing call to preprocess_expression() for the
WindowClause's runCondtion. The WindowFuncs in the targetlist will have
had this process done, so we must also do it for the WindowFuncs in the
runCondition so that they can be correctly found in the targetlist
during setrefs.c
Bug: #17709
Reported-by: Alexey Makhmutov
Author: Richard Guo, David Rowley
Discussion: https://postgr.es/m/17709-4f557160e3e8ee9a@postgresql.org
Backpatch-through: 15, where 9d9c02ccd was introduced
Buildfarm member wrasse has been complaining about empty declarations
as an effect of 8018ffb and 83a1a1b due to extra semicolons.
While on it, remove also the last backslash of the macros definitions,
causing more lines to be eaten in it than necessary, per comment from
Tom Lane.
Reported-by: Tom Lane, and buildfarm member wrasse
Author: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/1188769.1670640236@sss.pgh.pa.us
Replace the error trapping scheme introduced in 5bc450629 with our
shiny new errsave/ereturn mechanism. This doesn't have any real
functional impact (although I think that the new coding is able
to report a few more errors softly than v15 did). And I doubt
there's any measurable performance difference either. But this
gets rid of an ad-hoc, one-of-a-kind design in favor of a mechanism
that will be widely used going forward, so it should be a net win
for code readability.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
This patch converts the input functions for date, time, timetz,
timestamp, timestamptz, and interval to the new soft-error style.
There's some related stuff in formatting.c that remains to be
cleaned up, but that seems like a separable project.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Pay down some ancient technical debt (dating to commit 022fd9966):
fix a couple of places in datetime parsing that were throwing
ereport's immediately instead of returning a DTERR code that could be
interpreted by DateTimeParseError. The reason for that was that there
was no mechanism for passing any auxiliary data (such as a zone name)
to DateTimeParseError, and these errors seemed to really need it.
Up to now it didn't matter that much just where the error got thrown,
but now we'd like to have a hard policy that datetime parse errors
get thrown from just the one place.
Hence, invent a "DateTimeErrorExtra" struct that can be used to
carry any extra values needed for specific DTERR codes. Perhaps
in the future somebody will be motivated to use this to improve
the specificity of other DateTimeParseError messages, but for now
just deal with the timezone-error cases.
This is on the way to making the datetime input functions report
parse errors softly; but it's really an independent change, so
commit separately.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
More could be done in this line, but I just grabbed some low-hanging
fruit. Principal objective was to remove the need for several ugly
unconstify() usages in formatting.c.
This patch converts the input functions for bool, int2, int4, int8,
float4, float8, numeric, and contrib/cube to the new soft-error style.
array_in and record_in are also converted. There's lots more to do,
but this is enough to provide proof-of-concept that the soft-error
API is usable, as well as reference examples for how to convert
input functions.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
pg_input_is_valid() returns boolean, while pg_input_error_message()
returns the primary error message if the input is bad, or NULL
if the input is OK. The main reason for having two functions is
so that we can test both the details-wanted and the no-details-wanted
code paths.
Although these are primarily designed with testing in mind,
it could well be that they'll be useful to end users as well.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Postgres' standard mechanism for reporting errors (ereport() or elog())
is used for all sorts of error conditions. This means that throwing
an exception via ereport(ERROR) requires an expensive transaction or
subtransaction abort and cleanup, since the exception catcher dare not
make many assumptions about what has gone wrong. There are situations
where we would rather have a lighter-weight mechanism for dealing
with errors that are known to be safe to recover from without a full
transaction cleanup. This commit creates infrastructure to let us
adapt existing error-reporting code for that purpose. See the
included documentation changes for details. Follow-on commits will
provide test code and usage examples.
The near-term plan is to convert most if not all datatype input
functions to report invalid input "softly". This will enable
implementing some SQL/JSON features cleanly and without the cost
of subtransactions, and it will also allow creating COPY options
to deal with bad input without cancelling the whole COPY.
This patch is mostly by me, but it owes very substantial debt to
earlier work by Nikita Glukhov, Andrew Dunstan, and Amul Sul.
Thanks also to Andres Freund for review.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
The USER SET flag specifies that the variable should be set on behalf of an
ordinary role. That lets ordinary roles set placeholder variables, which
permission requirements are not known yet. Such a value wouldn't be used if
the variable finally appear to require superuser privileges.
The new flags are stored in the pg_db_role_setting.setuser array. Catversion
is bumped.
This commit is inspired by the previous work by Steve Chavez.
Discussion: https://postgr.es/m/CAPpHfdsLd6E--epnGqXENqLP6dLwuNZrPMcNYb3wJ87WR7UBOQ%40mail.gmail.com
Author: Alexander Korotkov, Steve Chavez
Reviewed-by: Pavel Borisov, Steve Chavez
Commit 7103ebb7aa added support for MERGE, which included support for
inheritance hierarchies, but didn't document the fact that ONLY could
be specified before the source and/or target tables to exclude tables
inheriting from the tables specified.
Update merge.sgml to mention this, and while at it, add some
regression tests to cover it.
Dean Rasheed, reviewed by Nathan Bossart.
Backpatch to 15, where MERGE was added.
Discussion: https://postgr.es/m/CAEZATCU0XM-bJCvpJuVRU3UYNRqEBS6g4-zH%3Dj9Ye0caX8F6uQ%40mail.gmail.com
Make the argument types of the File API match stdio better:
- Change the data buffer to void *, from char *.
- Change FileWrite() data buffer to const on top of that.
- Change amounts to size_t, from int.
In passing, change the FilePrefetch() amount argument from int to
off_t, to match the underlying posix_fadvise().
Discussion: https://www.postgresql.org/message-id/flat/11dda853-bb5b-59ba-a746-e168b1ce4bdb%40enterprisedb.com
In commit ffbb7e65a, I added a ModifyTableState member to ResultRelInfo
to save the owning ModifyTableState for use by nodeModifyTable.c when
performing batch inserts, but as pointed out by Tom Lane, that changed
the array stride of es_result_relations, and that would break any
previously-compiled extension code that accesses that array. Fix by
removing that member from ResultRelInfo and instead adding a List member
at the end of EState to save such ModifyTableStates.
Per report from Tom Lane. Back-patch to v14, like the previous commit;
I chose to apply the patch to HEAD as well, to make back-patching easy.
Discussion: http://postgr.es/m/4065383.1669395453%40sss.pgh.pa.us
After restart, we don't perform streaming of an in-progress transaction if
it was previously decoded and confirmed by the client. To achieve that we
were comparing the END location of the WAL record being decoded with the
WAL location we have already decoded and confirmed by the client. While
decoding the commit record, to decide whether to process and send the
complete transaction, we compare its START location with the WAL location
we have already decoded and confirmed by the client. Now, if we need to
queue some change in the transaction while decoding the commit record
(e.g. snapshot), it is possible that we decide to stream the transaction
but later commit processing decides to skip it. In such a case, we would
needlessly send the changes and later when we decide to skip it, we will
send stream abort.
We also sometimes decide to stream the changes when we actually just need
to process them locally like a change for invalidations. This will lead us
to send empty streams. To avoid this, while queuing each change for
decoding, we remember whether the transaction has any change that actually
needs to be sent downstream and use that information later to decide
whether to stream the transaction or not.
Note, we can't avoid all cases where we have to send empty streams like
the case where the plugin later decides that the change is not
publishable. However, we will no longer need to send stream_abort when we
skip sending a particular transaction.
Author: Dilip Kumar
Reviewed-by: Hou Zhijie, Ashutosh Bapat, Shi yu, Amit Kapila
Discussion: https://postgr.es/m/CAFiTN-tHK=7LzfrPs8fbT2ksrOJGQbzywcgXst2bM9-rJJAAUg@mail.gmail.com
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
Combine some duplicated code stanzas by creating small functions.
Most of these duplications arose at a time when I wouldn't have
trusted C compilers to auto-inline small functions intelligently,
but they're probably poor practice now. Similarly split out some
bits that aren't actually duplicative as the code stands, but would
become so after an upcoming patch to add another error-handling
code path.
Take the opportunity to add some lengthier comments about what
we're doing here, too. Re-order one function that seemed not
very well-placed.
Patch by me, per suggestions from Andres Freund.
Discussion: https://postgr.es/m/3bbbb0df-7382-bf87-9737-340ba096e034@postgrespro.ru
Generate a Makefile.global that's complete enough for PGXS to work for some
extensions. It is likely that this compatibility layer will not suffice for
every extension and not all platforms - we can expand it over time.
This allows extensions to use a single buildsystem across all the supported
postgres versions. Once all supported PG versions support meson, we can remove
the compatibility layer.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
Previously export_dynamic was set in src/makefiles/Makefile.$port. For solaris
this required exporting with_gnu_ld. The determination of with_gnu_ld would be
nontrivial to copy for meson PGXS compatibility. It's also nice to delete
libtool.m4.
This uses -Wl,--export-dynamic on all platforms, previously all platforms but
FreeBSD used -Wl,-E. The likelihood of a name conflict seems lower with the
longer spelling.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
The same code pattern is repeated 21 times for int64 counters (0 for
missing entry) and 5 times for doubles (0 for missing entry) on database
entries. This code is switched to use macros for the basic code
instead, shaving a few hundred lines of originally-duplicated code
patterns. The function names remain the same, but some fields of
PgStat_StatDBEntry have to be renamed to cope with the new style.
This is in the same spirit as 83a1a1b.
Author: Michael Paquier
Reviewed-by: Nathan Bossart, Bertrand Drouvot
Discussion: https://postgr.es/m/Y46stlxQ2LQE20Na@paquier.xyz
There likely are further issues, but as evidenced by the CI task proposed by
Justin in the referenced thread, this suffices to build and run basic tests in
cygwin (some fixes for the test infrastructure are needed, but that's
independent of the meson aspect).
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20221021034040.GT16921@telsasoft.com
Currently, information about the permissions to be checked on relations
mentioned in a query is stored in their range table entries. So the
executor must scan the entire range table looking for relations that
need to have permissions checked. This can make the permission checking
part of the executor initialization needlessly expensive when many
inheritance children are present in the range range. While the
permissions need not be checked on the individual child relations, the
executor still must visit every range table entry to filter them out.
This commit moves the permission checking information out of the range
table entries into a new plan node called RTEPermissionInfo. Every
top-level (inheritance "root") RTE_RELATION entry in the range table
gets one and a list of those is maintained alongside the range table.
This new list is initialized by the parser when initializing the range
table. The rewriter can add more entries to it as rules/views are
expanded. Finally, the planner combines the lists of the individual
subqueries into one flat list that is passed to the executor for
checking.
To make it quick to find the RTEPermissionInfo entry belonging to a
given relation, RangeTblEntry gets a new Index field 'perminfoindex'
that stores the corresponding RTEPermissionInfo's index in the query's
list of the latter.
ExecutorCheckPerms_hook has gained another List * argument; the
signature is now:
typedef bool (*ExecutorCheckPerms_hook_type) (List *rangeTable,
List *rtePermInfos,
bool ereport_on_violation);
The first argument is no longer used by any in-core uses of the hook,
but we leave it in place because there may be other implementations that
do. Implementations should likely scan the rtePermInfos list to
determine which operations to allow or deny.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGjJDmUhDSfv-U2qhKJjt9ST7Xh9JXC_irsAQ1TAUsJYg@mail.gmail.com
9d9c02ccd added window "run conditions", which allows the evaluation of
monotonic window functions to be skipped when the run condition is no
longer true. Prior to this commit, once the run condition was no longer
true and we stopped evaluating the window functions, we simply just left
the ecxt_aggvalues[] and ecxt_aggnulls[] arrays alone to store whatever
value was stored there the last time the window function was evaluated.
Leaving a stale value in there isn't really a problem on 64-bit builds as
all of the window functions which we recognize as monotonic all return
int8, which is passed by value on 64-bit builds. However, on 32-bit
builds, this was a problem as the value stored in the ecxt_values[]
element would be a by-ref value and it would be pointing to some memory
which would get reset once the tuple context is destroyed. Since the
WindowAgg node will output these values in the resulting tupleslot, this
could be problematic for the top-level WindowAgg node which must look at
these values to filter out the rows that don't meet its filter condition.
Here we fix this by just zeroing the ecxt_aggvalues[] and setting the
ecxt_aggnulls[] array to true when the run condition first becomes false.
This results in the WindowAgg's output having NULLs for the WindowFunc's
columns rather than the stale or pointer pointing to possibly freed
memory. These tuples with the NULLs can only make it as far as the
top-level WindowAgg node before they're filtered out. To ensure that
these tuples *are* always filtered out, we now insist that OpExprs making
up the run condition are strict OpExprs. Currently, all the window
functions which the planner recognizes as monotonic return INT8 and the
operator which is used for the run condition must be a member of a btree
opclass. In reality, these restrictions exclude nothing that's built-in
to Postgres and are unlikely to exclude anyone's custom operators due to
the requirement that the operator is part of a btree opclass. It would be
unusual if those were not strict.
Reported-by: Sergey Shinderuk, using valgrind
Reviewed-by: Richard Guo, Sergey Shinderuk
Discussion: https://postgr.es/m/29184c50-429a-ebd7-f1fb-0589c6723a35@postgrespro.ru
Backpatch-through: 15, where 9d9c02ccd was added
The same code pattern is repeated 17 times for int64 counters (0 for
missing entry) and 5 times for timestamps (NULL for missing entry) on
table entries. This code is switched to use a macro for the basic code
instead, shaving a few hundred lines of originally-duplicated code. The
function names remain the same, but some fields of PgStat_StatTabEntry
have to be renamed to cope with the new style.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart
Discussion: https:/postgr.es/m/20221204173207.GA2669116@nathanxps13
Passing a NULL snapshot (InvalidSnapshot) is going to work but only as long
as the index can't find any matching rows. This can be confusing for
the extension authors, so add an explicit check for this argument. The check
is implemented with Assert() in order to avoid overhead in release builds.
Reported-by: Sven Klemm
Discussion: https://postgr.es/m/CAJ7c6TPxitD4vbKyP-mpmC1XwyHdPPqvjLzm%2BVpB88h8LGgneQ%40mail.gmail.com
Author: Aleksander Alekseev
Reviewed-by: Pavel Borisov
By default, the contents generated by the custom and directory dump
formats are compressed. However, with the existing test facility, the
restore program will succeed regardless of whether the dumped output was
compressed or not without checking if anything has been compressed.
This commit implements a portable way to check the contents of the
custom and directory dump formats:
- glob_patterns, that can be defined for each test as an array of
glob()-compilable strings, tracking the contents that should or should
not be compressed. While this is useful to make sure that the table
data is compressed, this also checks that blobs.toc and toc.dat are
never compressed.
- command_like, to execute a command on a dump and check its generated
output. This is used here in correlation with pg_restore -l to check if
the dumps have been compressed or not, depending on if the build
supports gzip, or not.
This hole in the tests has come up when working on 5e73a60, where
compression has to be applied by default, if available, for both dump
formats.
The idea of glob_patterns comes from me, and Georgios has come up with
the design for command_like.
Author: Georgios Kokolatos, Michael Paquier
Discussion: https://postgr.es/m/DQn4czCWR1rcbGPLL7p3LfEr5-kGmlySm-H05VgroINdikvhtS5r9EdI6b8D8sjnbKdJ09k-cxs2AqijBeHAWk9Q8gvEAxPRHuLRhwONcGc=@pm.me
Keeping the SQL commands that initdb runs in string arrays before
feeding them to PG_CMD_PUTS() seems unnecessarily verbose and
inflexible. In some cases, the array only has one member. In other
cases, one might want to use PG_CMD_PRINTF() instead, to parametrize a
command, but that would require breaking up the loop or using
workarounds like replace_token(). Unwind all that; it's much simpler
that way.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/flat/2c50823b-f453-bb97-e38b-34751c51dcdf%40enterprisedb.com
A couple of places weren't up to speed for this. By sheer good
luck, we didn't fail but just selected a non-memoized join plan,
at least in the test case we have. Nonetheless, it's a bug,
and I'm not quite sure that it couldn't have worse consequences
in other examples. So back-patch to v14 where Memoize came in.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com
For historical reasons, pg_dump refers to large objects as "BLOBs".
This term is not used anywhere else in PostgreSQL, and it also means
something different in the SQL standard and other SQL systems.
This patch renames internal functions, code comments, documentation,
etc. to use the "large object" or "LO" terminology instead. There is
no functionality change, so the archive format still uses the name
"BLOB" for the archive entry. Additional long command-line options
are added with the new naming.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/868a381f-4650-9460-1726-1ffd39a270b4%40enterprisedb.com
The error messages reported during any failures while reading or
validating the header of a WAL currently includes only the offset of the
page but not the compiled LSN referring to the page, requiring an extra
step to compile it if looking at the surroundings with pg_waldump or
similar. Adding this information costs a bit in translation, but also
eases debugging.
Author: Bharath Rupireddy
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, Maxim Orlov, Michael
Paquier
Discussion: https://postgr.es/m/CALj2ACWV=FCddsxcGbVOA=cvPyMr75YCFbSQT6g4KDj=gcJK4g@mail.gmail.com
As pointed out by Dean Rasheed, we really should be using tmp >
-(PG_INTNN_MIN / 10) rather than tmp > (PG_INTNN_MAX / 10) for checking
for overflows in the accumulation in the pg_strtointNN functions. This
does happen to be the same number when dividing by 10, but there is a
pending patch which adds other bases and this is not the same number if we
were to divide by 2 rather than 10, for example. If the base 2 parsing
was to follow this example then we could accidentally think a string
containing the value of PG_INT32_MIN was an overflow in pg_strtoint32.
Clearly that shouldn't overflow.
This does not fix any actual live bugs, only some bad examples of overflow
checks for future bases.
Reported-by: Dean Rasheed
Discussion: https://postgr.es/m/CAEZATCVEtwfhdm-K-etZYFB0=qsR0nT6qXta_W+GQx4RYph1dg@mail.gmail.com
Just because I'm a neatnik, and I'm currently working on
code in this area. It annoys me to not be able to pgindent
my patches without working around unrelated changes.
It neglected to recurse to the subpath, meaning you'd get back
a path identical to the input. This could produce wrong query
results if the omission meant that the subpath fails to enforce
some join clause it should be enforcing. We don't have a test
case for this at the moment, but the code is obviously broken
and the fix is equally obvious. Back-patch to v14 where
Memoize was introduced.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_R=ORpz=Lkn2q3ebPC5EuWyfZF+tmfCPVLBVK5W39mHA@mail.gmail.com
These two functions failed to cover MaterialPath. That's not a
fatal problem, but we can generate better plans in some cases
if we support it.
Tom Lane and Richard Guo
Discussion: https://postgr.es/m/1854233.1669949723@sss.pgh.pa.us
We might fail to generate a partitionwise join, because
reparameterize_path_by_child() does not support all path types.
This should not be a hard failure condition: we should just fall back
to a non-partitioned join. However, generate_partitionwise_join_paths
did not consider this possibility and would emit the (misleading)
error "could not devise a query plan for the given query" if we'd
failed to make any paths for a child join. Fix it to give up on
partitionwise joining if so. (The accepted technique for giving up
appears to be to set rel->nparts = 0, which I find pretty bizarre,
but there you have it.)
I have not added a test case because there'd be little point:
any omissions of this sort that we identify would soon get fixed
by extending reparameterize_path_by_child(), so the test would stop
proving anything. However, right now there is a known test case based
on failure to cover MaterialPath, and with that I've found that this
is broken in all supported versions. Hence, patch all the way back.
Original report and patch by me; thanks to Richard Guo for
identifying a test case that works against committed versions.
Discussion: https://postgr.es/m/1854233.1669949723@sss.pgh.pa.us
Experiments have shown that modern versions of both gcc and clang are
unable to fully optimize the multiplication by 10 that we're doing in the
pg_strtointNN functions. Both compilers seem to be making use of "imul",
which is not the most efficient way to multiply by 10. This seems to be
due to the overflow checking that we're doing. Without the overflow
checks, both those compilers switch to a more efficient method of
multiplying by 10. In absence of overflow concern, integer multiplication
by 10 can be done by bit-shifting left 3 places to multiply by 8 and then
adding the original value twice.
To allow compilers this flexibility, here we adjust the code so that we
accumulate the number as an unsigned version of the type and remove the
use of pg_mul_sNN_overflow() and pg_sub_sNN_overflow(). The overflow
checking can be done simply by checking if the accumulated value has gone
beyond a 10th of the maximum *signed* value for the given type. If it has
then the accumulation of the next digit will cause an overflow. After
this is done, we do a final overflow check before converting the unsigned
version of the number back to its signed counterpart.
Testing has shown about an 8% speedup of a COPY into a table containing 2
INT columns.
Author: David Rowley, Dean Rasheed
Discussion: https://postgr.es/m/CAApHDvrL6_+wKgPqRHr7gH_6xy3hXM6a3QCsZ5ForurjDFfenA@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvrdYByjfj-=WbmVNFgmVZg88-dE7heukw8p55aJ+W=qxQ@mail.gmail.com
I wrote this to provide a home for a planned discussion of error
return conventions for non-error-throwing functions. But it seems
useful as documentation of existing code no matter what becomes of
that proposal, so commit separately.
When updating a relation with a rule whose action performed an INSERT
from a multi-row VALUES list, the rewriter might skip processing the
VALUES list, and therefore fail to replace any DEFAULTs in it. This
would lead to an "unrecognized node type" error.
The reason was that RewriteQuery() assumed that a query doing an
INSERT from a multi-row VALUES list would necessarily only have one
item in its fromlist, pointing to the VALUES RTE to read from. That
assumption is correct for the original query, but not for product
queries produced for rule actions. In such cases, there may be
multiple items in the fromlist, possibly including multiple VALUES
RTEs.
What is required instead is for RewriteQuery() to skip any RTEs from
the product query's originating query, which might include one or more
already-processed VALUES RTEs. What's left should then include at most
one VALUES RTE (from the rule action) to be processed.
Patch by me. Thanks to Tom Lane for reviewing.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAEZATCV39OOW7LAR_Xq4i%2BLc1Byux%3DeK3Q%3DHD_pF1o9LBt%3DphA%40mail.gmail.com
This is present in the declaration for ReadDataFromArchive, so we'd better
have it in the definition too in order to avoid compilers from complaining
about the mismatch of function signatures.
When the relkind of a relache entry changes, because a table is converted into
a view, pgstats can get confused in 15+, leading to crashes or assertion
failures.
For HEAD, Tom fixed this in b23cd185fd, by removing support for converting a
table to a view, removing the source of the inconsistency. This commit just
adds an assertion that a relcache entry's relkind does not change, just in
case we end up with another case of that in the future. As there's no cases of
changing relkind anymore, we can't add a test that that's handled correctly.
For 15, fix the problem by not maintaining the association with the old pgstat
entry when the relkind changes during a relcache invalidation processing. In
that case the pgstat entry needs to be unlinked first, to avoid
PgStat_TableStatus->relation getting out of sync. Also add a test reproducing
the issues.
No known problem exists in 11-14, so just add the test there.
Reported-by: vignesh C <vignesh21@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CALDaNm2yXz+zOtv7y5zBd5WKT8O0Ld3YxikuU3dcyCvxF7gypA@mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm3oZA-8Wbps2Jd1g5_Gjrr-x3YWrJPek-mF5Asrrvz2Dg@mail.gmail.com
Backpatch: 15-
Ignore trailing spaces for non-deterministic collations when
hashing.
The previous behavior could lead to tuples falling into the wrong
partitions when hash partitioning is combined with the BPCHAR type and
a non-deterministic collation. Fortunately, it did not affect hash
indexes, because hash indexes do not use extended hash functions.
Decline to backpatch, per discussion.
Discussion: https://postgr.es/m/eb83d0ac7b299eb08f9b900dd08a5a0c5d90e517.camel@j-davis.com
Reviewed-by: Richard Guo, Tom Lane
It seems better to deal with this by explicit annotations on the
fields in question, instead of magic knowledge embedded in the
script. While that creates a risk-of-omission from failing to
annotate fields, the preceding commit should catch any such
oversights.
Discussion: https://postgr.es/m/263413.1669513145@sss.pgh.pa.us
Check that if we generate a call to copy, compare, write, or read
a specific node type, that node type does have the appropriate
support function. (This doesn't protect against trying to invoke
nonexistent code when considering generic field types such as
"Node *", but it seems like a useful check anyway.)
Check that array_size() refers to a field appearing earlier in
the struct. Aside from catching obvious errors like a misspelled
field name, this protects against a more subtle mistake: if the
size field appears later in the struct than the array field, then
compare and read functions would misbehave. There is actually
exactly that situation in PlannerInfo, but it's okay since we
do not need compare or read functionality for that (today anyway).
Discussion: https://postgr.es/m/263413.1669513145@sss.pgh.pa.us
Some options of these commands need to be able to identify the start
of the function body within the output of pg_get_functiondef().
It used to be that that always began with "AS", but since the
introduction of new-style SQL functions, it might also start with
"BEGIN" or "RETURN". Fix that on the psql side, and add some
regression tests.
Noted by me awhile ago, but I didn't do anything about it.
Thanks to David Johnston for a nag.
Discussion: https://postgr.es/m/AM9PR01MB8268D5CDABDF044EE9F42173FE8C9@AM9PR01MB8268.eurprd01.prod.exchangelabs.com
Up to now we have allowed manual creation of an ON SELECT rule on
a table to convert it into a view. That was never anything but a
horrid, error-prone hack though. pg_dump used to rely on that
behavior to deal with cases involving circular dependencies,
where a dependency loop could be broken by separating the creation
of a view from installation of its ON SELECT rule. However, we
changed pg_dump to use CREATE OR REPLACE VIEW for that in commit
d8c05aff5 (which was later back-patched as far as 9.4), so there's
not a good argument anymore for continuing to support the behavior.
The proximate reason for axing it now is that we found that the
new statistics code has failure modes associated with the relkind
change caused by this behavior. We'll patch around that in v15,
but going forward it seems like a better idea to get rid of the
need to support relkind changes.
Discussion: https://postgr.es/m/CALDaNm2yXz+zOtv7y5zBd5WKT8O0Ld3YxikuU3dcyCvxF7gypA@mail.gmail.com
When checking for roles with a pg_ prefix in <= 9.5 servers, report
all found roles in a text file as how other checks are done instead
of just reporting that they exist. Rolenames are printed with their
Oids to match other reports.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/4BB2735C-C347-4CF7-AFB1-8573BE930066@yesql.se
ri_RootToPartitionMap is currently only initialized for tuple routing
target partitions, though a future commit will need the ability to use
it even for the non-partition child tables, so make adjustments to the
decouple it from the partitioning code.
Also, make it lazily initialized via ExecGetRootToChildMap(), making
that function its preferred access path. Existing third-party code
accessing it directly should no longer do so; consequently, it's been
renamed to ri_RootToChildMap, which also makes it consistent with
ri_ChildToRootMap.
ExecGetRootToChildMap() houses the logic of setting the map appropriately
depending on whether a given child relation is partition or not.
To support this, also add a separate entry point for TupleConversionMap
creation that receives an AttrMap. No new code here, just split an
existing function in two.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYUhDXSK5BTvG_xk=eaAEJCD4GS3C6uH7ybBvv+Z_Tmg@mail.gmail.com
For Updates and Deletes, we were not honoring the columns list for old
tuple values while sending tuple data via pgoutput. This results in
pgoutput emitting more columns than expected.
This is not a problem for built-in logical replication as we simply ignore
additional columns based on the relation information sent previously which
didn't have those columns. However, some other users of pgoutput plugin
may expect the columns as per the column list. Also, sending extra columns
unnecessarily consumes network bandwidth defeating the purpose of the
column list feature.
Reported-by: Gunnar Morling
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/CADGJaX9kiRZ-OH0EpWF5Fkyh1ZZYofoNRCrhapBfdk02tj5EKg@mail.gmail.com
The only use of $(LD) in Makefiles is for AIX, to generate the export file for
the backend. We only support the system linker on AIX and we already hardcode
the path to a number of other binaries. Removing LD substitution will simplify
the upcoming meson PGXS compatibility.
While at it, add a comment why -r is used.
A subsequent commit will remove the determination of LD from configure as
well.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
Until now we emitted the cflags to build the CRC objects into architecture
specific variables. That doesn't make a whole lot of sense to me - we're never
going to target x86 and arm at the same time, so they don't need to be
separate variables.
It might be better to instead continue to have CFLAGS_SSE42 /
CFLAGS_ARMV8_CRC32C be computed by PGAC_ARMV8_CRC32C_INTRINSICS /
PGAC_SSE42_CRC32_INTRINSICS and then set CFLAGS_CRC based on those. But it
seems unlikely that we'd need other sets of CRC specific flags for those two
architectures at the same time.
This simplifies the upcoming meson PGXS compatibility.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
Compression specifications are currently used by pg_basebackup and
pg_receivewal, and are able to let the user control in an extended way
the method and level of compression used. As an effect of this commit,
pg_dump's -Z/--compress is now able to use more than just an integer, as
of the grammar "method[:detail]".
The method can be either "none" or "gzip", and can optionally take a
detail string. If the detail string is only an integer, it defines the
compression level. A comma-separated list of keywords can also be used
method allows for more options, the only keyword supported now is
"level".
The change is backward-compatible, hence specifying only an integer
leads to no compression for a level of 0 and gzip compression when the
level is greater than 0.
Most of the code changes are straight-forward, as pg_dump was relying on
an integer tracking the compression level to check for gzip or no
compression. These are changed to use a compression specification and
the algorithm stored in it.
As of this change, note that the dump format is not bumped because there
is no need yet to track the compression algorithm in the TOC entries.
Hence, we still rely on the compression level to make the difference
when reading them. This will be mandatory once a new compression method
is added, though.
In order to keep the code simpler when parsing the compression
specification, the code is changed so as pg_dump now fails hard when
using gzip on -Z/--compress without its support compiled, rather than
enforcing no compression without the user knowing about it except
through a warning. Like before this commit, archive and custom formats
are compressed by default when the code is compiled with gzip, and left
uncompressed without gzip.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/O4mutIrCES8ZhlXJiMvzsivT7ztAMja2lkdL1LJx6O5f22I2W8PBIeLKz7mDLwxHoibcnRAYJXm1pH4tyUNC4a8eDzLn22a6Pb1S74Niexg=@pm.me
In commit 40c24bfef, I forgot to use get_rule_expr_paren() for the
arguments of AT TIME ZONE, resulting in possibly not printing parens
for expressions that need it. But get_rule_expr_paren() wouldn't have
gotten it right anyway, because isSimpleNode() hadn't been taught that
COERCE_SQL_SYNTAX parent nodes don't guarantee sufficient parentheses.
Improve all that. Also use this methodology for F_IS_NORMALIZED, so
that we don't print useless parens for that.
In passing, remove a comment that was obsoleted later.
Per report from Duncan Sands. Back-patch to v14 where this code
came in. (Before that, we didn't try to print AT TIME ZONE that way,
so there was no bug just ugliness.)
Discussion: https://postgr.es/m/f41566aa-a057-6628-4b7c-b48770ecb84a@deepbluecap.com
The planner will now add a given PartitioPruneInfo to
PlannedStmt.partPruneInfos instead of directly to the
Append/MergeAppend plan node. What gets set instead in the
latter is an index field which points to the list element
of PlannedStmt.partPruneInfos containing the PartitioPruneInfo
belonging to the plan node.
A later commit will make AcquireExecutorLocks() do the initial
partition pruning to determine a minimal set of partitions to be
locked when validating a plan tree and it will need to consult the
PartitioPruneInfos referenced therein to do so. It would be better
for the PartitioPruneInfos to be accessible directly than requiring
a walk of the plan tree to find them, which is easier when it can be
done by simply iterating over PlannedStmt.partPruneInfos.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
Matviews have been discarded from needing predicate locks since 3bf3ab8
and their introduction. At this point, there was no concurrent flavor
of REFRESH yet, hence there was no meaning in having materialized views
look at read/write conflicts with concurrent transactions using
themselves the serializable isolation level because they could only be
refreshed with an access exclusive lock. CONCURRENTLY, on the contrary,
allows reads and writes during a refresh as it holds a share update
exclusive lock.
Some isolation tests are added to show the effect of the change, with a
combination of one table and a matview based on it, using a mix of
REFRESH CONCURRENTLY and read/write queries.
This could arguably be considered as a bug, but as it is a subtle
behavior change potentially impacting applications no backpatch is
done.
Author: Yugo Nagata
Reviewed-by: Richard Guo, Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/20220726164434.42d4e33911b4b4fcf751c4e7@sraoss.co.jp
Writing "pg_regress --dbname= ..." led to a crash, because
we weren't expecting there to be no database name supplied.
It doesn't seem like a great idea to run regression tests
in whatever is the user's default database; so rather than
supporting this case let's explicitly reject it.
Per report from Xing Guo. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CACpMh+A8cRvtvtOWVAZsCM1DU81GK4DL26R83y6ugZ1osV=ifA@mail.gmail.com
A future commit will move the checkAsUser field from RangeTblEntry
to a new node that, unlike RTEs, will only be created for tables
mentioned in the query but not for the inheritance child relations
added to the query by the planner. So, checkAsUser value for a
given child relation will have to be obtained by referring to that
for its ancestor mentioned in the query.
In preparation, it seems better to expand the use of RelOptInfo.userid
during planning in place of rte->checkAsUser so that there will be
fewer places to adjust for the above change.
Given that the child-to-ancestor mapping is not available during the
execution of a given "child" ForeignScan node, add a checkAsUser
field to ForeignScan to carry the child relation's RelOptInfo.userid.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqGFCs2uq7VRKi7g+FFKbP6Ea_2_HkgZb2HPhUfaAKT3ng@mail.gmail.com
This adds coverage for a few scenarios not checked yet in psql, with
multiple query combined across files defined by \o, \g or both at the
same time. The results are saved in the output files defined, then
reloaded back to check what has been written to them.
Author: Daniel Verite
Discussion: https://postgr.es/m/25c2bb5b-9012-40f8-8088-774cb764046d@manitou-mail.org
This commit moves the code in charge of deparsing the method and detail
strings fed later to parse_compress_specification() to a common routine,
where the backward-compatible case of only an integer being found (N
= 0 => "none", N > 1 => gzip at level N) is handled.
Note that this has a side-effect for pg_basebackup, as we now attempt to
detect "server-" and "client-" before checking for the integer-only
pre-14 grammar, where values like server-N and client-N (without the
follow-up detail string) are now valid rather than failing because of an
unsupported method name. Past grammars are still handled the same way,
but these flavors are now authorized, and would now switch to consider N
= 0 as no compression and N > 1 as gzip with the compression level used
as N, with the caller still controlling if the compression method should
be done server-side, client-side or is unspecified. The documentation
of pg_basebackup is updated to reflect that.
This benefits other code paths that would like to rely on the same logic
as pg_basebackup and pg_receivewal with option values used for
compression specifications, one area discussed lately being pg_dump.
Author: Georgios Kokolatos, Michael Paquier
Discussion: https://postgr.es/m/O4mutIrCES8ZhlXJiMvzsivT7ztAMja2lkdL1LJx6O5f22I2W8PBIeLKz7mDLwxHoibcnRAYJXm1pH4tyUNC4a8eDzLn22a6Pb1S74Niexg=@pm.me
The frontend-side routine in charge of building a SCRAM verifier
mentioned that the restrictions applying to SASLprep on the password
with the encoding are described at the top of fe-auth-scram.c, but this
information is in auth-scram.c.
This is wrong since 8f8b9be, so backpatch all the way down as this is an
important documentation bit.
Spotted while reviewing a different patch.
Backpatch-through: 11
Previously, we'd compress only when the active range of array entries
reached Max(4 * PROCARRAY_MAXPROCS, 2 * pArray->numKnownAssignedXids).
If max_connections is large, the first term could result in not
compressing for a long time, resulting in much wastage of cycles in
hot-standby backends scanning the array to take snapshots. Get rid
of that term, and just bound it to 2 * pArray->numKnownAssignedXids.
That however creates the opposite risk, that we might spend too much
effort compressing. Hence, consider compressing only once every 128
commit records. (This frequency was chosen by benchmarking. While
we only tried one benchmark scenario, the results seem stable over
a fairly wide range of frequencies.)
Also, force compression when processing RecoveryInfo WAL records
(which should be infrequent); the old code could perform compression
then, but would do so only after the same array-range check as for
the transaction-commit path.
Also, opportunistically run compression if the startup process is about
to wait for WAL, though not oftener than once a second. This should
prevent cases where we waste lots of time by leaving the array
not-compressed for long intervals due to low WAL traffic.
Lastly, add a simple check to keep us from uselessly compressing
when the array storage is already compact.
Back-patch, as the performance problem is worse in pre-v14 branches
than in HEAD.
Simon Riggs and Michail Nikolaev, with help from Tom Lane and
Andres Freund.
Discussion: https://postgr.es/m/CALdSSPgahNUD_=pB_j=1zSnDBaiOtqVfzo8Ejt5J_k7qZiU1Tw@mail.gmail.com
This is an oversight in commit 7c337b6b5: I apparently didn't think
about the possibility of a SQL function being executed multiple
times within a query. In that case, functions.c's primitive caching
mechanism allows the same utility parse tree to be presented for
execution more than once. We have to tell ProcessUtility to make
a working copy of the parse tree, or bad things happen.
Normally I'd add a regression test, but I think the reported crasher
is dependent on some rather random implementation choices that are
nowhere near functions.c, so its usefulness as a long-lived test
feels questionable. In any case, this fix is clearly correct given
the design choices of 7c337b6b5.
Per bug #17702 from Xin Wen. Thanks to Daniel Gustafsson for
analysis. Back-patch to v14 where the faulty commit came in
(before that, the responsibility for copying scribble-able
utility parse trees lay elsewhere).
Discussion: https://postgr.es/m/17702-ad24fdcdd1e9047a@postgresql.org
The JOIN_SEMI case Assert'ed that there are no PlaceHolderVars that
need to be evaluated at the semijoin's RHS, which is wrong because
there could be some in the semijoin's qual condition. However, there
could not be any references further up than that, and within the qual
there is not any way that such a PHV could have gone to null yet, so
we don't really need the PHV and there is no need to avoid making the
RHS-removal optimization. The upshot is that there's no actual bug
in production code, and we ought to just remove this misguided Assert.
While we're here, also drop the JOIN_RIGHT case, which is dead code
because reduce_outer_joins() already got rid of JOIN_RIGHT.
Per bug #17700 from Xin Wen. Uselessness of the JOIN_RIGHT case
pointed out by Richard Guo. Back-patch to v12 where this code
was added.
Discussion: https://postgr.es/m/17700-2b5c10d917c30687@postgresql.org
When it's given as true, return a 0 in the position of the missing
column rather than raising an error.
This is currently unused, but it allows us to reimplement column
permission checking in a subsequent commit. It seems worth breaking
into a separate commit because it affects unrelated code.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFfiai=qBxPDTjaio_ZcaqUKh+FC=prESrB8ogZgFNNNQ@mail.gmail.com
Previously, an idle startup (recovery) process would wake up every 5
seconds to have a chance to poll for promote_trigger_file, even if that
GUC was not configured. That promotion triggering mechanism was
effectively superseded by pg_ctl promote and pg_promote() a long time
ago. There probably aren't many users left and it's very easy to change
to the modern mechanisms, so we agreed to remove the feature.
This is part of a campaign to reduce wakeups on idle systems.
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Discussion: https://postgr.es/m/CANbhV-FsjnzVOQGBpQ589%3DnWuL1Ex0Ykn74Nh1hEjp2usZSR5g%40mail.gmail.com
This provides two new predefined roles: pg_vacuum_all_tables and
pg_analyze_all_tables. Roles which have been granted these roles can
perform vacuum or analyse respectively on any or all tables as if they
were a superuser. This removes the need to grant superuser privilege to
roles just so they can perform vacuum and/or analyze.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
This commit adds a basic set of authentication tests to check after the
new keywords added by a54b658 for the HBA and ident files, aka
"include", "include_if_exists" and "include_dir".
This includes checks for all the positive cases originally proposed,
where valid contents are generated for the HBA and ident files without
any errors happening in the server, checking as well the contents of
their respective system views. The error handling will be evaluated
separately (-DEXEC_BACKEND makes that trickier), and what we have here
covers most of the ground I would like to see covered if one manipulates
the tokenization logic of hba.c in the future.
While on it, some coverage is added for files included with '@' for
database or user name lists.
Author: Julien Rouhaud
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
When loading plperl built against Strawberry perl or the msys2 ucrt perl
that have been built with gcc, a binary mismatch has been encountered
which looks like this:
loadable library and perl binaries are mismatched (got handshake key 0000000012800080, needed 0000000012900080)
To cure this we bring the handshake keys into sync by adding
NO_THREAD_SAFE_LOCALE to the defines used to build plperl.
Discussion: https://postgr.es/m/20211005004334.tgjmro4kuachwiuc@alap3.anarazel.de
Discussion: https://postgr.es/m/c2da86a0-2906-744c-923d-16da6047875e@dunslane.net
Backpatch to all live branches.
Two booleans used for timeout tracking were used within some SIGALRM
signal handlers, but they were not declared as sig_atomic_t, so mark
them as such. This has no consequence on WIN32 for both tools.
Author: Ranier Vilela
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/CAEudQArCDQQiPiFR16=yu9k5s2tp4tgEe1U1ZbkW4ofx81AWWQ@mail.gmail.com
Strawberry uses __builtin_expect which Visual C doesn't have. For this
case define it as a noop. Solution taken from vim sources.
Backpatch to all live branches
Commit b663a4136, which allowed FDWs to INSERT rows in bulk, added to
nodeModifyTable.c code to flush pending inserts to the foreign-table
result relation(s) before completing processing of the ModifyTable node,
but the code failed to take into account the case where the INSERT query
has modifying CTEs, leading to incorrect results.
Also, that commit failed to flush pending inserts before firing BEFORE
ROW triggers so that rows are visible to such triggers.
In that commit we scanned through EState's
es_tuple_routing_result_relations or es_opened_result_relations list to
find the foreign-table result relations to which pending inserts are
flushed, but that would be inefficient in some cases. So to fix, 1) add
a List member to EState to record the insert-pending result relations,
and 2) modify nodeModifyTable.c so that it adds the foreign-table result
relation to the list in ExecInsert() if appropriate, and flushes pending
inserts properly using the list where needed.
While here, fix a copy-and-pasteo in a comment in ExecBatchInsert(),
which was added by that commit.
Back-patch to v14 where that commit appeared.
Discussion: https://postgr.es/m/CAPmGK16qutyCmyJJzgQOhfBq%3DNoGDqTB6O0QBZTihrbqre%2BoxA%40mail.gmail.com
Peer connections require support for local connections to work, but the
test missed the same check as the other ones in this suite. The
buildfarm does not run the authentication tests on Windows, and, more
surprisingly, the CI with meson was already able to skip it.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/28b9d685-9590-45b1-fe87-358d61c6950a@inbox.ru
The code has been assuming already in a few places that the initial
recursion nesting depth is 0, and the recent changes in hba.c (mainly
783e8c6) have relies on this assumption in more places. The maximum
recursion nesting level is assumed to be 10 for hba.c and GUCs.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20221124090724.n7amf5kpdhx6vb76@jrouhaud
Logical WAL senders display now as follows, gaining a database name:
postgres: walsender USER DATABASE HOST(PORT) STATE
Physical WAL senders show up the same, as of:
postgres: walsender USER HOST(PORT) STATE
This information was missing, hence it was not possible to know from ps
if a WAL sender was a logical or a physical one, and on which database
it is connected when it is logical.
Author: Tatsuhiro Nakamori
Reviewed-by: Fujii Masao, Bharath Rupireddy
Discussion: https://postgr.es/m/36a3b137e82e0ea9fe7e4234f03b64a1@oss.nttdata.com
pg_hba.conf and pg_ident.conf gain support for three record keywords:
- "include", to include a file.
- "include_if_exists", to include a file, ignoring it if missing.
- "include_dir", to include a directory of files. These are classified
by name (C locale, mostly) and need to be prefixed by ".conf", hence
following the same rules as GUCs.
This commit relies on the refactoring pieces done in efc9816, ad6c528,
783e8c6 and 1b73d0b, adding a small wrapper to build a list of
TokenizedAuthLines (tokenize_include_file), and the code is shaped to
offer some symmetry with what is done for GUCs with the same options.
pg_hba_file_rules and pg_ident_file_mappings gain a new field called
file_name, to track from which file a record is located, taking
advantage of the addition of rule_number in c591300 to offer an
organized view of the HBA or ident records loaded.
Bump catalog version.
Author: Julien Rouhaud
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
When building hash indexes using the spool method, tuples are added to the
index page in hashkey order. Because of this, we can safely skip
performing the binary search on the existing tuples on the page to find
the location to insert the tuple based on its hashkey value. For this
case, we can just always put the tuple at the end of the item array as the
tuples will always arrive in hashkey order.
Testing has shown that this can improve hash index build speeds by 5-15%
with a unique set of integer values.
Author: Simon Riggs
Reviewed-by: David Rowley
Tested-by: David Zhang, Tomas Vondra
Discussion: https://postgr.es/m/CANbhV-GBc5JoG0AneUGPZZW3o4OK5LjBGeKe_icpC3R1McrZWQ@mail.gmail.com
The memory context was created before attempting to open the first HBA
or ident file, which would cause it to leak. This had no consequences
for the system views for HBA and ident files, but this would cause
memory leaks in the postmaster on reload if the initial HBA and/or ident
files are missing, which is a valid behavior while the backend is
running.
Oversight in efc9816.
Author: Ted Yu
Discussion: https://postgr.es/m/CALte62xH6ivgiKKzPRJgfekPZC6FKLB3xbnf3=tZmc_gKj78dw@mail.gmail.com
This should have been added in efc9816, but it looks like I have found a
way to mess up a bit a patch split. This should have no consequence in
practice, but let's be clean.
Discussion: https://postgr.es/m/Y324HvGKiWxW2yxe@paquier.xyz
The list of TokenizedAuthLines generated at parsing for the HBA and
ident files is now stored in a static context called tokenize_context,
where only all the parsed tokens are stored. This context is created
when opening the first authentication file of a HBA/ident set (hba_file
or ident_file), and is cleaned up once we are done all the work around
it through a new routine called free_auth_file(). One call of
open_auth_file() should have one matching call of free_auth_file(), the
creation and deletion of the tokenization context is controlled by the
recursion depth of the tokenization.
Rather than having tokenize_auth_file() return a memory context that
includes all the records, the tokenization logic now creates and deletes
one memory context each time this function is called. This will
simplify recursive calls to this routine for the upcoming inclusion
record logic.
While on it, rename tokenize_inc_file() to tokenize_expand_file() as
this would conflict with the upcoming patch that will add inclusion
records for HBA/ident files. An '@' file has its tokens added to an
existing list.
Reloading HBA/indent configuration in a tight loop shows no leaks, as of
one type of test done (with and without -DEXEC_BACKEND).
Author: Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/Y324HvGKiWxW2yxe@paquier.xyz
Some custom table access method may have their tuple format and use custom
executor nodes for their custom scan types. The ability to set a custom slot
would save them from tuple format conversion. Other users of custom executor
nodes may also benefit.
Discussion: https://postgr.es/m/CAPpHfduJUU6ToecvTyRE_yjxTS80FyPpct4OHaLFk3OEheMTNA@mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Pavel Borisov
We're running out of bits for new permissions. This change doubles the
number of permissions we can accomodate from 16 to 32, so the
forthcoming new ones for vacuum/analyze don't exhaust the pool.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Pass VACUUM parameters (VacuumParams state) to vacuum_set_xid_limits()
directly, rather than passing most individual VacuumParams fields as
separate arguments.
Also make vacuum_set_xid_limits() output parameter symbol names match
those used by its vacuumlazy.c caller.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=TE7gW5DgSahDkf0UEZigFGAoHNNN6EvSrdzC=Kn+hrA@mail.gmail.com
We shouldn't ever need to rely on whether HEAP_XMAX_INVALID is set in
t_infomask when considering whether or not an xmax should be deemed
already frozen, since that status flag is just a hint. The only
acceptable representation for an "xmax_already_frozen" raw xmax field is
the transaction ID value zero (also known as InvalidTransactionId).
Adjust code that superficially appeared to rely on HEAP_XMAX_INVALID to
make the rule about xmax_already_frozen clear. Also avoid needlessly
rereading the tuple's raw xmax.
Oversight in bugfix commit d2599ecf. There is no evidence that this
ever led to incorrect behavior, so no backpatch. The worst consequence
of this bug was that VACUUM could hypothetically fail to notice and
report on certain kinds of corruption, which seems fairly benign.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzkh3DMCDRPfhZxj9xCq9v3WmzvmbiCpf1dNKUBPadhCbQ@mail.gmail.com
Examine ParseNamespaceItem flags to detect whether a column name
is unreferenceable for lack of LATERAL, or could be referenced if
a qualified name were used, and give better hints for such cases.
Also, don't phrase the message to imply that there's only one
matching column when there is really more than one.
Many of the regression test output changes are not very interesting,
but just reflect reclassifying the "There is a column ... but it
cannot be referenced from this part of the query" messages as DETAIL
rather than HINT. They are details per our style guide, in the sense
of being factual rather than offering advice; and this change provides
room to offer actual HINTs about what to do.
While here, adjust the fuzzy-name-matching code to be a shade less
impenetrable. It was overloading the meanings of FuzzyAttrMatchState
fields way too much IMO, so splitting them into multiple fields seems
to make it clearer. It's not like we need to shave bytes in that
struct.
Per discussion of bug #17233 from Alexander Korolev.
Discussion: https://postgr.es/m/17233-afb9d806aaa64b17@postgresql.org
We've made multiple attempts at preventing get_actual_variable_range
from taking an unreasonable amount of time (3ca930fc3, fccebe421).
But there's still an issue for the very first planning attempt after
deletion of a large number of extremal-valued tuples. While that
planning attempt will set "killed" bits on the tuples it visits and
thereby reduce effort for next time, there's still a lot of work it
has to do to visit the heap and then set those bits. It's (usually?)
not worth it to do that much work at plan time to have a slightly
better estimate, especially in a context like this where the table
contents are known to be mutating rapidly.
Therefore, let's bound the amount of work to be done by giving up
after we've visited 100 heap pages. Giving up just means we'll
fall back on the extremal value recorded in pg_statistic, so it
shouldn't mean that planner estimates suddenly become worthless.
Note that this means we'll still gradually whittle down the problem
by setting a few more index "killed" bits in each planning attempt;
so eventually we'll reach a good state (barring further deletions),
even in the absence of VACUUM.
Simon Riggs, per a complaint from Jakub Wartak (with cosmetic
adjustments by me). Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAKZiRmznOwi0oaV=4PHOCM4ygcH4MgSvt8=5cu_vNCfc8FSUug@mail.gmail.com
Once a logical slot has acquired a catalog_xmin, it doesn't let go of
it, even when invalidated by exceeding the max_slot_wal_keep_size, which
means that dead catalog tuples are not removed by vacuum anymore since
the point is invalidated, until the slot is dropped. This could be
catastrophic if catalog churn is high.
Change the computation of Xmin to ignore invalidated slots,
to prevent dead rows from accumulating.
Backpatch to 13, where slot invalidation appeared.
Author: Sirisha Chamarthi <sirichamarthi22@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/CAKrAKeUEDeqquN9vwzNeG-CN8wuVsfRYbeOUV9qKO_RHok=j+g@mail.gmail.com
The lwlock wait queue scalability issue fixed in a4adc31f69 was quite hard to
find because of the exponential backoff and because we adjust spins_per_delay
over time within a backend.
To make it easier to find similar issues in the future, add a wait event for
the pg_usleep() in perform_spin_delay(). Showing a wait event while spinning
without sleeping would increase the overhead of spinlocks, which we do not
want.
We may at some later point want to have more granular wait events, but that'd
be a substantial amount of work. This provides at least some insights into
something currently hard to observe.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
https://postgr.es/m/20221120204310.xywrhyxyytsajuuq@awork3.anarazel.de
The Hunspell project moved from Sourceforge to Github sometime
in 2016, so update our links to match the new URL. Backpatch
the doc changes to all supported versions.
Discussion: https://postgr.es/m/DC9A662A-360D-4125-A453-5A6CB9C6C4B4@yesql.se
Backpatch-through: v11
I just spent an annoying amount of time reverse-engineering the
100%-undocumented API between ts_headline and the text search
parser's prsheadline function. Add some commentary about that
while it's fresh in mind. Also remove some unused macros in
wparser_def.c.
While at it, I noticed that when commit 78e73e875 added a
CHECK_FOR_INTERRUPTS call in TS_execute_recurse, it missed
doing so in the parallel function TS_phrase_execute, which
surely needs one just as much.
Back-patch because of the missing CHECK_FOR_INTERRUPTS.
Might as well back-patch the rest of this too.
At least on linux, set_ps_display() breaks /proc/$pid/environ. The sanitizer's
helper library uses /proc/$pid/environ to implement getenv(), as it wants to
work independent of libc. When just using undefined and alignment sanitizers,
the sanitizer library is only initialized when the first error occurs, by
which time we've often already called set_ps_display(), preventing the
sanitizer libraries from seeing the options.
We can work around that by defining __ubsan_default_options, a weak symbol
libsanitizer uses to get defaults from the application, and return
getenv("UBSAN_OPTIONS"). But only if main already was reached, so that we
don't end up relying on a not-yet-working getenv().
As it's just a function that won't get called when not running a sanitizer, it
doesn't seem necessary to make compilation of the function conditional.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20220323173537.ll7klrglnp4gn2um@alap3.anarazel.de
The postmaster normally sends SIGQUIT to force-terminate its
child processes after a child crash or immediate-stop request.
If that doesn't result in child exit within a few seconds,
we follow it up with SIGKILL. This patch provides GUC flags
that allow either of these signals to be replaced with SIGABRT.
On typically-configured Unix systems, that will result in a
core dump being produced for each such child. This can be
useful for debugging problems, although it's not something you'd
want to have on in production due to the risk of disk space
bloat from lots of core files.
The old postmaster -T switch, which sent SIGSTOP in place of
SIGQUIT, is changed to be the same as send_abort_for_crash.
As far as I can tell from the code comments, the intent of
that switch was just to block things for long enough to force
core dumps manually, which seems like an unnecessary extra step.
(Maybe at the time, there was no way to get most kernels to
produce core files with per-PID names, requiring manual core
file renaming after each one. But now it's surely the hard way.)
I also took the opportunity to remove the old postmaster -n
(skip shmem reinit) switch, which hasn't actually done anything
in decades, though the documentation still claimed it did.
Discussion: https://postgr.es/m/2251016.1668797294@sss.pgh.pa.us
This switch impacts 9 patterns related to a SQL-mandated special syntax
for function calls:
- LOCALTIME [ ( typmod ) ]
- LOCALTIMESTAMP [ ( typmod ) ]
- CURRENT_TIME [ ( typmod ) ]
- CURRENT_TIMESTAMP [ ( typmod ) ]
- CURRENT_DATE
Five new entries are added to pg_proc to compensate the removal of
SQLValueFunction to provide backward-compatibility and making this
change transparent for the end-user (for example for the attribute
generated when a keyword is specified in a SELECT or in a FROM clause
without an alias, or when specifying something else than an Iconst to
the parser).
The parser included a set of checks coming from the files in charge of
holding the C functions used for the SQLValueFunction calls (as of
transformSQLValueFunction()), which are now moved within each function's
execution path, so this reduces the dependencies between the execution
and the parsing steps. As of this change, all the SQL keywords use the
same paths for their work, relying only on COERCE_SQL_SYNTAX. Like
fb32748, no performance difference has been noticed, while the perf
profiles get reduced with ExecEvalSQLValueFunction() gone.
Bump catalog version.
Reviewed-by: Corey Huinker, Ted Yu
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
As per one of the CI reports, there is an assertion failure which
indicates that we were trying to use an unenforced xmin horizon for
decoding snapshots. Though, we couldn't figure out the reason for
assertion failure these checks would help us in finding the reason if the
problem happens again in the future.
Author: Amit Kapila based on suggestions by Andres Freund
Reviewd by: Andres Freund
Discussion: https://postgr.es/m/CAA4eK1L8wYcyTPxNzPGkhuO52WBGoOZbT0A73Le=ZUWYAYmdfw@mail.gmail.com
Until now LWLockDequeueSelf() sequentially searched the list of waiters to see
if the current proc is still is on the list of waiters, or has already been
removed. In extreme workloads, where the wait lists are very long, this leads
to a quadratic behavior. #backends iterating over a list #backends
long. Additionally, the likelihood of needing to call LWLockDequeueSelf() in
the first place also increases with the increased length of the wait queue, as
it becomes more likely that a lock is released while waiting for the wait list
lock, which is held for longer during lock release.
Due to the exponential back-off in perform_spin_delay() this is surprisingly
hard to detect. We should make that easier, e.g. by adding a wait event around
the pg_usleep() - but that's a separate patch.
The fix is simple - track whether a proc is currently waiting in the wait list
or already removed but waiting to be woken up in PGPROC->lwWaiting.
In some workloads with a lot of clients contending for a small number of
lwlocks (e.g. WALWriteLock), the fix can substantially increase throughput.
As the quadratic behavior arguably is a bug, we might want to decide to
backpatch this fix in the future.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20221027165914.2hofzp4cvutj6gin@awork3.anarazel.de
Discussion: https://postgr.es/m/CALj2ACXktNbG=K8Xi7PSqbofTZozavhaxjatVc14iYaLu4Maag@mail.gmail.com
As the list of shared relations is fixed, we can just dispatch based
IsSharedRelation(), instead of first trying to look up stats for a non-shared
rel and falling back to shared stats.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de
Discussion: https://postgr.es/m/8c1851a2-a98e-e1bc-7729-37b0b95f66ec@gmail.com
Commit 3d14e171e dropped regress_roleoption_donor twice and
regress_roleoption_protagonist not at all. Leaving roles behind
after "make installcheck" is unfriendly in its own right, plus
it causes repeated runs of "make installcheck" to fail.
Commit c94959d41 fixed DROP OPERATOR to reset oprcom/oprnegate links
to the dropped operator; but it missed updating this old comment that
claimed we allow such links to dangle.
Currently there is a race condition where if concurrent TAP tests both
test that they can open a port they will assume that it is free and use
it, causing one of them to fail. To prevent this we record a reservation
using an exclusive lock, and any TAP test that discovers a reservation
checks to see if the reserving process is still alive, and looks for
another free port if it is.
Ports are reserved in a directory set by the environment setting
PG_TEST_PORT_DIR, or if that doesn't exist a subdirectory of the top
build directory as set by meson or Makefile.global, or its own
tmp_check directory.
The prove_check recipe in Makefile.global.in is extended to export
top_builddir to the TAP tests. This was already exported by the
prove_installcheck recipes.
Per complaint from Andres Freund
This will be backpatched in due course after some testing.
Discussion: https://postgr.es/m/20221002164931.d57hlutrcz4d2zi7@awork3.anarazel.de
This commit changes six SQL keywords to use COERCE_SQL_SYNTAX rather
than relying on SQLValueFunction:
- CURRENT_ROLE
- CURRENT_USER
- USER
- SESSION_USER
- CURRENT_CATALOG
- CURRENT_SCHEMA
Among the six, "user", "current_role" and "current_catalog" require
specific SQL functions to allow ruleutils.c to map them to the SQL
keywords these require when using COERCE_SQL_SYNTAX. Having
pg_proc.proname match with the keyword ensures that the compatibility
remains the same when projecting any of these keywords in a FROM clause
to an attribute name when an alias is not specified. This is covered by
the tests added in 2e0d80c, making sure that a correct mapping happens
with each SQL keyword. The three others (current_schema, session_user
and current_user) already have pg_proc entries for this job, so this
brings more consistency between the way such keywords are treated in the
parser, the executor and ruleutils.c.
SQLValueFunction is reduced to half its contents after this change,
simplifying its logic a bit as there is no need to enforce a C collation
anymore for the entries returning a name as a result. I have made a few
performance tests, with a million-ish calls to these keywords without
seeing a difference in run-time or in perf profiles
(ExecEvalSQLValueFunction() is removed from the profiles). The
remaining SQLValueFunctions are now related to timestamps and dates.
Bump catalog version.
Reviewed-by: Corey Huinker
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
ProcSleep() used a PGPROC* variable to point to PROC_QUEUE->links.next,
because that does "the right thing" with SHMQueueInsertBefore(). While that
largely works, it's certainly not correct and unnecessary - we can just use
SHM_QUEUE* to point to the insertion point.
Noticed when testing a 32bit of postgres with undefined behavior
sanitizer. UBSan noticed that sometimes the supposed PGPROC wasn't
sufficiently aligned (required since 46d6e5f567, ensured indirectly, via
ShmemAllocRaw() guaranteeing cacheline alignment).
For now fix this by using a SHM_QUEUE* for the insertion point. Subsequently
we should replace all the use of PROC_QUEUE and SHM_QUEUE with ilist.h, but
that's a larger change that we don't want to backpatch.
Backpatch to all supported versions - it's useful to be able to run postgres
under UBSan.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221117014230.op5kmgypdv2dtqsf@awork3.anarazel.de
Backpatch: 11-
The test output varies when debug_discard_caches is enabled,
because that causes extra executions of recomputeNamespacePath.
Maybe putting a hook in that was a bad idea, but as a stopgap,
just turn off debug_discard_caches in this test.
Per buildfarm (now that we have debug_discard_caches coverage
again). Back-patch to v15 where this module was added.
Discussion: https://postgr.es/m/2267406.1668804934@sss.pgh.pa.us
basics.source is supposed to be pretty closely in step with
the examples in chapter 2 of the tutorial, but I forgot to
update it in commit f05a5e000. Fix that, and adjust a couple
of other discrepancies that had crept in over time.
(I notice that advanced.source is nowhere near being in sync
with chapter 3, but I lack the ambition to do something
about that right now.)
Similar to how the INHERIT option controls whether or not the
permissions of the granted role are automatically available to the
grantee, the new SET permission controls whether or not the grantee
may use the SET ROLE command to assume the privileges of the granted
role.
In addition, the new SET permission controls whether or not it
is possible to transfer ownership of objects to the target role
or to create new objects owned by the target role using commands
such as CREATE DATABASE .. OWNER. We could alternatively have made
this controlled by the INHERIT option, or allow it when either
option is given. An advantage of this approach is that if you
are granted a predefined role with INHERIT TRUE, SET FALSE, you
can't go and create objects owned by that role.
The underlying theory here is that the ability to create objects
as a target role is not a privilege per se, and thus does not
depend on whether you inherit the target role's privileges. However,
it's surely something you could do anyway if you could SET ROLE
to the target role, and thus making it contingent on whether you
have that ability is reasonable.
Design review by Nathan Bossat, Wolfgang Walther, Jeff Davis,
Peter Eisentraut, and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmob+zDSRS6JXYrgq0NWdzCXuTNzT5eK54Dn2hhgt17nm8A@mail.gmail.com
eqjoinsel() currently makes use of MCV stats only when we have such
stats for both sides of the clause. As coded, though, it would
fetch those stats even when they're present for just one side.
This can be a bit expensive with high statistics targets, leading
to wasted effort in common cases such as joining a unique column
to a non-unique column. So it seems worth the trouble to do a quick
pre-check to confirm that both sides have MCVs before fetching either.
Also, tweak the API spec for get_attstatsslot() to document the
method we're using here.
David Geier, Tomas Vondra, Tom Lane
Discussion: https://postgr.es/m/b9846ca0-5f1c-9b26-5881-aad3f42b07f0@gmail.com
The object_address test file turns to psql unaligned output for some
tests to avoid huge diffs for changes. But this is useful also to the
other large test in that file, so apply it there as well. This also
makes verifying the null and whitespace behavior easier.
Version strings with unequal numbers of parts were being compared
incorrectly. We cure this by treating a missing part in the shorter
version as 0.
per complaint from Jehan-Guillaume de Rorthais, but the fix is mine, not
his.
Discussion: https://postgr.es/m/20220628225325.53d97b8d@karst
Backpatch to release 14 where this code was introduced.
This commit improves the handling of the following clauses:
- Addition of "CREATE" for ALTER DEFAULT PRIVILEGES .. GRANT/REVOKE.
- Addition of GRANT|ADMIN|INHERIT OPTION FOR for REVOKE, with some
completion for roles, INHERIT being added recently by e3ce2de.
- Addition of GRANT WITH ADMIN|INHERIT.
The list of privilege options common to GRANT and REVOKE is refactored
to avoid its duplication.
Author: Shi Yu
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/OSZPR01MB6310FCE8609185A56344EED2FD559@OSZPR01MB6310.jpnprd01.prod.outlook.com
For now the task has been set to be manually triggered, as we are already
limited by the amount of CI time available for windows, particularly on cfbot.
Author: Melih Mutlu <m.melihmutlu@gmail.com>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAGPVpCSKS9E0An4=e7ZDnme+y=WOcQFJYJegKO8kE9=gh8NJKQ@mail.gmail.com
Standardize on the name snapshotConflictHorizon for all XID fields from
WAL records that generate recovery conflicts when in hot standby mode.
This supersedes the previous latestRemovedXid naming convention.
The new naming convention places emphasis on how the values are actually
used by REDO routines. How the values are generated during original
execution (details of which vary by record type) is deemphasized. Users
of tools like pg_waldump can now grep for snapshotConflictHorizon to see
all potential sources of recovery conflicts in a standardized way,
without necessarily having to consider which specific record types might
be involved.
Also bring a couple of WAL record types that didn't follow any kind of
naming convention into line. These are heapam's VISIBLE record type and
SP-GiST's VACUUM_REDIRECT record type. Now every WAL record whose REDO
routine calls ResolveRecoveryConflictWithSnapshot() passes through the
snapshotConflictHorizon field from its WAL record. This is follow-up
work to the refactoring from commit 9e540599 that made FREEZE_PAGE WAL
records use a standard snapshotConflictHorizon style XID cutoff.
No bump in XLOG_PAGE_MAGIC, since the underlying format of affected WAL
records doesn't change.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wzm2CQUmViUq7Opgk=McVREHSOorYaAjR1ZpLYkRN7_dPw@mail.gmail.com
Before, receiving a NegotiateProtocolVersion message would result in a
confusing error message like
expected authentication request from server, but received v
This adds proper handling of this protocol message and produces an
on-topic error message from it.
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f9c7862f-b864-8ef7-a861-c4638c83e209%40enterprisedb.com
After sending a startup message, libpq expects either an error
response ('E') or an authentication request ('R'). Before processing
the message, it ensures it has read enough bytes to correspond to the
length specified in the message. However, when processing the 'R'
message, if an EOF status is returned it loops back waiting for more
input, even though we already checked that we have enough input. In
this particular case, this is probably not reachable anyway, because
other code ensures we have enough bytes for an authentication request
message, but the code is wrong and misleading. In the more general
case, processing a faulty message could result in an EOF status, which
would then result in an infinite loop waiting for the end of a message
that will never come. The correction is to make this an error.
Reported-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/f9c7862f-b864-8ef7-a861-c4638c83e209@enterprisedb.com
This commend references a struct that disappeared before MERGE was
merged ... and ExecDelete is not called by the committed MERGE anyway.
Revert to the original wording.
Backpatch to 15
As introduced in 006b69f, the order of the headers was incorrect.
However, it happens that lwlock.h can just be dropped from the list, so
let's be clean and remove it, fixing the order of the listed headers.
Commit 1cc29fe7c, which taught EXPLAIN to print PARAM_EXEC Params as
the referenced expressions, included some checks to prevent matching
Params found in SubPlans or InitPlans to NestLoopParams of upper query
levels. At the time, this seemed possibly necessary to avoid false
matches because of the planner's habit of re-using the same PARAM_EXEC
slot in multiple places in a plan. Furthermore, in the absence of
LATERAL no such reference could be valid anyway. But it's possible
now that we have LATERAL, and in the wake of 46c508fbc and 1db5667ba
I believe the false-match hazard is gone. Hence, remove the
in_same_plan_level checks. As shown in the regression test changes,
this provides a useful improvement in readability for EXPLAIN of
LATERAL-using subplans.
Richard Guo, reviewed by Greg Stark and myself
Discussion: https://postgr.es/m/CAMbWs4-YSOcQXAagJetP95cAeZPqzOy5kM5yijG0PVW5ztRb4w@mail.gmail.com
Commit 05a7be93 changed the timing of the first reply sent by a
walreceiver, which caused a few TAP tests that call wait_for_catchup()
when they haven't actually streamed anything yet to wait ~10 seconds
(wal_receiver_status_interval).
Before commit 05a7be93 the initial reply was sent after 100ms, but
there's no reason not to send it immediately as a slight improvement.
Do the same for HS feedback for consistency.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/742545.1668377284%40sss.pgh.pa.us
Implement a data structure that is a List of Bitmapsets, which is
essentially a 2-D boolean array except that the rows need not all
be the same width. Operations such as union and intersection are
meaningful for these, just as they are for Bitmapsets. Eventually
we might build many of the same operations that we have written for
Bitmapsets, but for the first use-case we just need a few.
That first use-case is for antijoin detection: reduce_outer_joins
needs to find the set of Vars that are certain to be non-null in a
successfully joined (not null-extended) left join row, and also
find the set of Vars subject to higher-level IS NULL constraints,
and intersect them. We had been doing this by making Lists of
the Var nodes and then using list_intersect, which works but is
pretty inefficient compared to a bitmapset-like intersection.
Potentially it's O(N^2) if there are a lot of Vars involved,
which fortunately there generally aren't; still it's not great.
Moreover, that method requires the Vars of interest to be exactly
equal() in the join condition and the upper IS NULL condition,
which is problematic for my WIP patch that labels Vars according
to which outer joins have possibly nulled them.
Discussion: https://postgr.es/m/892228.1668437838@sss.pgh.pa.us
Discussion: https://postgr.es/m/CAMbWs4-mvPPCJ1W6iK6dD5HiNwoJdi6mZp=-7mE8N9Sh+cd0tQ@mail.gmail.com
We can re-use the clusters set up for this test script's first test,
instead of generating new ones. On my machine this is good for
about a 20% reduction in this script's runtime, from ~6.5 sec to
~5.2 sec.
This idea could be taken further, but it'd require a much more invasive
patch. These cases are easy because the Perl variable names were
already being re-used.
Anton A. Melnikov
Discussion: https://postgr.es/m/eb7aa992-c2d7-6ce7-4942-0c784231a362@inbox.ru
Two locations working on pg_ts_config_map are switched from
CatalogTupleInsert() to a multi-insert approach with tuple slots:
- ALTER TEXT SEARCH CONFIGURATION ADD/ALTER MAPPING when inserting new
entries. The number of entries to insert is known in advance, so is the
number of slots needed. Note that CatalogTupleInsertWithInfo() is now
used for the entry updates.
- CREATE TEXT SEARCH CONFIGURATION, where up to ~20-ish records could be
inserted at once. The number of slots is not known in advance, hence
a slot initialization is delayed until a tuple is stored in it.
Like all the changes of this kind (1ff4161, 63110c6 or e3931d01), an
insert batch is capped at 64kB.
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/Y3M5bovrkTQbAO4W@paquier.xyz
This allows to insert at once all the enum values defined with a given
type into pg_enum, reducing the WAL produced by roughly 10%~. pg_enum's
indexes are opened and closed now once rather than N times. The number
of items to insert is known in advance, making this change
straight-forward, and would happen on a CREATE TYPE .. AS ENUM.
The amount of data inserted is capped at 64kB for each insert batch.
This is similar to commits 63110c6 and e3931d01, that worked on
different catalogs.
Reported-by: Ranier Vilela
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Ranier Vilela
Discussion: https://postgr.es/m/Y3M5bovrkTQbAO4W@paquier.xyz
This commit improves two code paths to open and close indexes a
minimum amount of times when doing a series of catalog updates or
inserts. CatalogTupleInsert() is costly when using it for multiple
inserts or updates compared to CatalogTupleInsertWithInfo(), as it would
need to open and close the indexes of the catalog worked each time an
operation is done.
This commit updates the following places:
- REINDEX CONCURRENTLY when copying statistics from one index relation
to the other. Multi-INSERTs are avoided here, as this would begin to
show benefits only for indexes with multiple expressions, for example,
which may not be the most common pattern. This change is noticeable in
profiles with indexes having many expressions, for example, and it would
improve any callers of CopyStatistics().
- Update of statistics on ANALYZE, that mixes inserts and updates.
In each case, the catalog indexes are opened only if at least one
insertion and/or update is required, to minimize the cost of the
operation. Like the previous coding, no indexes are opened as long as
at least one insert or update of pg_statistic has happened.
Author: Ranier Vilela
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/CAEudQAqh0F9y6Di_Wc8xW4zkWm_5SDd-nRfVsCn=h0Nm1C_mrg@mail.gmail.com
This commit introduces a basic facility to test SLRUs, in terms of
initialization, page reads, writes, flushes, truncation and deletions,
using SQL wrappers around the APIs of slru.c. This should be easily
extensible at will, and it can be used as a starting point for someone
willing to implement an external module that makes use of SLRUs (LWLock
tranche registering and SLRU initialization particularly).
As this requires a loaded library, the tests use a custom configuration
file and are disabled under installcheck.
Author: Aleksander Alekseev, Michael Paquier
Reviewed-by: Pavel Borisov, Daniel Gustafsson, Noah Misch, Maxim Orlov
Discussion: https://postgr.es/m/CAJ7c6TOFoWcHOW4BVe3BG_uikCrO9B91ayx9d6rh5JZr_tPESg@mail.gmail.com
Make heapam WAL records that describe freezing performed by VACUUM more
space efficient by storing each distinct "freeze plan" once, alongside
an array of associated page offset numbers (one per freeze plan). The
freeze plans required for most heap pages tend to naturally have a great
deal of redundancy, so this technique is very effective in practice. It
often leads to freeze WAL records that are less than 20% of the size of
equivalent WAL records generated using the previous approach.
The freeze plan concept was introduced by commit 3b97e6823b, which fixed
bugs in VACUUM's handling of MultiXacts. We retain the concept of
freeze plans, but go back to using page offset number arrays. There is
no loss of generality here because deduplication is an additive process
that gets applied mechanically when FREEZE_PAGE WAL records are built.
More than anything else, freeze plan deduplication is an optimization
that reduces the marginal cost of freezing additional tuples on pages
that will need to have at least one or two tuples frozen in any case.
Ongoing work that adds page-level freezing to VACUUM will take full
advantage of the improved cost profile through batching.
Also refactor some of the details surrounding recovery conflicts needed
to REDO freeze records in passing: make original execution responsible
for generating a standard latestRemovedXid cutoff, rather than working
backwards to get the same cutoff in the REDO routine. Bugfix commit
66fbcb0d2e did it the other way around, which is equivalent but obscures
what's going on.
Also rename the cutoff field from the WAL record/struct (rename the
field cutoff_xid to latestRemovedXid to match similar WAL records).
Processing of conflicts by REDO routines is already completely uniform,
so tools like pg_waldump should present the information driving the
process uniformly. There are two remaining WAL record types that still
don't quite follow this convention (heapam's VISIBLE record type and
SP-GiST's VACUUM_REDIRECT record type). They can be brought into line
by later work that totally standardizes how the cutoffs are presented.
Bump XLOG_PAGE_MAGIC.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-Wz=XytErMnb8FAyFd+OQEbiipB0Q2FmFdXrggPL4VBnRYQ@mail.gmail.com
Some callers didn't check the return value of pclose() or
ClosePipeStream() correctly. Either they didn't check it at all or
they treated it like the return of fclose().
The correct way is to first check whether the return value is -1, and
then report errno, and then check the return value like a result from
system(), for which we already have wait_result_to_str() to make it
simpler. To make this more compact, expand wait_result_to_str() to
also handle -1 explicitly.
Reviewed-by: Ankit Kumar Pandey <itsankitkp@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8cd9fb02-bc26-65f1-a809-b1cb360eef73@enterprisedb.com
This adds a new psql command \bind that sets query parameters and
causes the next query to be sent using the extended query protocol.
Example:
SELECT $1, $2 \bind 'foo' 'bar' \g
This may be useful for psql scripting, but one of the main purposes is
also to be able to test various aspects of the extended query protocol
from psql and to write tests more easily.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/e8dd1cd5-0e04-3598-0518-a605159fe314@enterprisedb.com
libpq now contains a mix of error message strings that end with
newlines and don't end with newlines, due to some newer code paths
with new ways of passing errors around. This leads to confusion and
mistakes both during development and translation.
This adds new functions libpq_append_error() and
libpq_append_conn_error() that encapsulate common code paths for
producing error message strings. Notably, these functions append the
newline, so that the string appearing in the code does not end with a
newline. This makes (almost) all error message strings in libpq
uniform in this regard (and also consistent with how we handle it
outside of libpq code). (There are a few exceptions that are
difficult to fit into this scheme, but they are only a few.)
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/7c0232ef-7b44-68db-599d-b327d0640a77@enterprisedb.com
Setting archive_library and archive_command at the same time is now an
error. Before, archive_library would take precedence over
archive_command.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/20220914222736.GA3042279%40nathanxps13
During XLOG_HASH_SPLIT_ALLOCATE_PAGE replay, we were checking for a
cleanup lock on the new bucket page after acquiring an exclusive lock on
it and raising a PANIC error on failure. However, it is quite possible
that checkpointer can acquire the pin on the same page before acquiring a
lock on it, and then the replay will lead to an error. So instead, directly
acquire the cleanup lock on the new bucket page during
XLOG_HASH_SPLIT_ALLOCATE_PAGE replay operation.
Reported-by: Andres Freund
Author: Robert Haas
Reviewed-By: Amit Kapila, Andres Freund, Vignesh C
Backpatch-through: 11
Discussion: https://postgr.es/m/20220810022617.fvjkjiauaykwrbse@awork3.anarazel.de
The parsing of the authentication files for HBA and ident entries
happens in two phases:
- Tokenization of the files, creating a list of TokenizedAuthLines.
- Validation of the HBA and ident entries, building a set of HbaLines or
IdentLines.
The second phase doing the validation provides already some error
context about the configuration file and the line where a problem
happens, but there is no such information in the first phase when
tokenizing the files. This commit adds an ErrorContextCallback in
tokenize_auth_file(), with a context made of the line number and the
configuration file name involved in a problem. This is useful for files
included in an HBA file for user and database lists, and it will become
much more handy to track problems for files included via a potential
@include[_dir,_if_exists].
The error context is registered so as the full chain of events is
reported when using cascaded inclusions when for example
tokenize_auth_file() recurses over itself on new files, displaying one
context line for each file gone through when tokenizing things.
Author: Michael Paquier
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/Y2xUBJ+S+Z0zbxRW@paquier.xyz
This adds a check on the recursion depth when including authentication
configuration files, something that has never been done when processing
'@' files for database and user name lists in pg_hba.conf. On HEAD,
this was leading to a rather confusing error, as of:
FATAL: exceeded maxAllocatedDescs (NN) while trying to open file "/path/blah.conf"
This refactors the code so as the error reported is now the following,
which is the same as for GUCs:
FATAL: could not open file "/path/blah.conf": maximum nesting depth exceeded
This reduces a bit the verbosity of the error message used for files
included in user and database lists, reporting only the file name of
what's failing to load, without mentioning the relative or absolute path
specified after '@' in a HBA file. The absolute path is built upon what
'@' defines anyway, so there is no actual loss of information. This
makes the future inclusion logic much simpler. A follow-up patch will
add an error context to be able to track on which line of which file the
inclusion is failing, to close the loop, providing all the information
needed to know the full chain of events.
This logic has been extracted from a larger patch written by Julien,
rewritten by me to have a unique code path calling AllocateFile() on
authentication files, and is useful on its own. This new interface
will be used later for authentication files included with
@include[_dir,_if_exists], in a follow-up patch.
Author: Michael Paquier, Julien Rouhaud
Discussion: https://www.postgresql.org/message-id/Y2xUBJ+S+Z0zbxRW@paquier.xyz
Add a NodeTag field to struct Bitmapset. This is free because of
alignment considerations on 64-bit hardware. While it adds some
space on 32-bit machines, we aren't optimizing for that case anymore.
The advantage is that data structures such as Lists of Bitmapsets
are now first-class objects to the Node infrastructure, and don't
require special-case code to handle.
This patch includes removal of one such special case, in indxpath.c:
bms_equal_any() can now be replaced by list_member(). There may be
more existing code that could be simplified, but I didn't look very
hard. We also get to drop the read_write_ignore annotations on a
couple of RelOptInfo fields.
The outfuncs/readfuncs support is arranged so that nothing changes
in the string representation of a Bitmapset field; therefore, this
doesn't need a catversion bump.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/109089.1668197158@sss.pgh.pa.us
The current code looks for the sample file in the source directory, but
it seems better to test against the installed sample file.
Backpatch to release 15 where the test was introduced.
Discussion: https://postgr.es/m/73eea68e-3b6f-5f63-6024-25ed26b52016@dunslane.net
Reviewed by Tom Lane, Alvaro Herrera, Michael Paquier.
Currently this only allows for one argument, which must be present, and
always returns a single string. With this change the following now all
work:
$all_config = $node->config_data;
%config_map = ($node->config_data);
$incdir = $node->config_data('--include-dir');
($incdir, $sharedir) = $node->config_data(
qw(--include-dir --share-dir));
Backpatch to release 15 where this was introduced.
Discussion: https://postgr.es/m/73eea68e-3b6f-5f63-6024-25ed26b52016@dunslane.net
Reviewed by Tom Lane, Alvaro Herrera, Michael Paquier.
Instead of dozens of mostly-duplicate pg_foo_aclcheck() functions,
write one common function object_aclcheck() that can handle almost all
of them. We already have all the information we need, such as which
system catalog corresponds to which catalog table and which column is
the ACL column.
There are a few pg_foo_aclcheck() that don't work via the generic
function and have special APIs, so those stay as is.
I also changed most pg_foo_aclmask() functions to static functions,
since they are not used outside of aclchk.c.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Instead of dozens of mostly-duplicate pg_foo_ownercheck() functions,
write one common function object_ownercheck() that can handle almost
all of them. We already have all the information we need, such as
which system catalog corresponds to which catalog table and which
column is the owner column.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Antonin Houska <ah@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/95c30f96-4060-2f48-98b5-a4392d3b6066@enterprisedb.com
Test files should now ignore has_wal_read_bug() so long as
wait_for_catchup() is their only known way of reaching the bug. That's
at least five files today, a number expected to grow over time. This
commit removes skip logic from three. By doing so, systems having the
bug regain the ability to catch other kinds of defects via those three
tests. The other two, 002_databases.pl and 031_recovery_conflict.pl,
have been unprotected. Back-patch to v15, where done_testing() first
became our standard.
Discussion: https://postgr.es/m/20221030031639.GA3082137@rfd.leadboat.com
It's safe to mark this as immutable, because it does not depend
on the timezone GUC setting. Oversight in commit 600b04d6b.
(There's an argument that timezone definitions do change from
time to time, but we have not worried about that in marking
other timestamp-related functions; for example AT TIME ZONE
has always been considered immutable. The situation is no
worse than our problems with time-varying locales, surely.)
Przemysław Sztoch
Discussion: https://postgr.es/m/eaa3fabe-50fc-bbe8-b096-ce62ddadab85@sztoch.pl
The original report was concerned with a possible inconsistency
between the heap and the visibility map, which I was unable to
confirm. The concern has been retracted.
However, there did seem to be a torn page hazard when using
checksums. By not setting the heap page LSN during redo, the
protections of minRecoveryPoint were bypassed. Fixed, along with a
misleading comment.
It may have been impossible to hit this problem in practice, because
it would require a page tear between the checksum and the flags, so I
am marking this as a theoretical risk. But, as discussed, it did
violate expectations about the page LSN, so it may have other
consequences.
Backpatch to all supported versions.
Reported-by: Konstantin Knizhnik
Reviewed-by: Konstantin Knizhnik
Discussion: https://postgr.es/m/fed17dac-8cb8-4f5b-d462-1bb4908c029e@garret.ru
Backpatch-through: 11
The stanza "SET STORAGE may need to add a TOAST table" does not
test what it's supposed to, and hasn't done so since we added
the ability to store constant column default values as metadata.
We need to use a non-constant default to get the expected table
rewrite to actually happen.
Fix that, and add the missing checks that would have exposed the
problem to begin with.
Noted while reviewing a patch that made changes in this test case.
Back-patch to v11 where the problem came in.
Replace the stopgap fix I made in 0e758ae89 with a cleaner one.
The real problem with 4ab5dae94 is that it contorted this function's
logic substantially, by introducing a third code path that required
different behavior in the function's main loop. That seems quite
unnecessary on closer inspection: the new IsBinaryUpgrade case can
just share the behavior of the other immediate-unlink cases. Hence,
revert 4ab5dae94 and most of 0e758ae89 (keeping the latter's
save/restore errno fix), and add IsBinaryUpgrade to the set of
conditions tested to choose immediate unlink.
Also fix some additional places with sloppy handling of errno,
to ensure we have an invariant that we always continue processing
after any non-ENOENT failure of do_truncate. I doubt that that's
fixing any bug of field importance, so I don't feel it necessary to
back-patch; but we might as well get it right while we're here.
Also improve the comments, which had drifted a bit from what the
code actually does, and neglected to mention some important
considerations.
Back-patch to v15, not because this is fixing any bug but because
it doesn't seem like a good idea for v15's mdunlinkfork logic to be
significantly different from both v14 and v16.
Discussion: https://postgr.es/m/3797575.1667924888@sss.pgh.pa.us
Previously, trying to set storage parameters on a partitioned table
always led to "unrecognized parameter foo", because the code expected
there might be some valid parameters; but there aren't any. The docs
make clear that it's intended that there never will be any, so let's
replace this useless search with a more to-the-point message.
Simon Riggs and Karina Litskevich
Discussion: https://postgr.es/m/CANbhV-H=eZ9kTR9mUgKGK0Qv9uXP=U+dQg3rinQHfTdFMhBA2A@mail.gmail.com
Add a little to the header comments for these functions to make it
clearer what guarantees about commit behavior are provided to callers.
(See commit f92944137 for context.)
Although this is only a comment change, it's really documentation
aimed at authors of extensions, so it seems appropriate to back-patch.
Yugo Nagata and Tom Lane, per further discussion of bug #17434.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
The code building an absolute path to a file included, as prefixed by
'@' in authentication files, for user and database lists uses the same
logic as for GUCs, except that it has no need to know about DataDir as
there is always a calling file to rely to build the base directory path.
The refactoring done in a1a7bb8 makes this move straight-forward, and
unifies the code used for GUCs and authentication files, and the
intention is to rely also on that for the upcoming patch to be able to
include full files from HBA or ident files.
Note that this gets rid of an inconsistency introduced in 370f909, that
copied the logic coming from GUCs but applied it for files included in
authentication files, where the result buffer given to
join_path_components() must have a size of MAXPGPATH. Based on a
double-check of the existing code, all the other callers of
join_path_components() already do that, except the code path changed
here.
Discussion: https://postgr.es/m/Y2igk7q8OMpg+Yta@paquier.xyz
The planner simplifies boolean comparisons such as "x = true" and
"x = false" down to "x" and "NOT x" respectively, to have a canonical
form to ease comparisons. However, if we want to use an index on x,
the index AM APIs require us to reconstitute the comparison-operator
form of the indexqual. While that works, in bitmap indexscans the
canonical form of the qual was emitted as a "filter" condition
although it really only needs to be a "recheck" condition, because
create_bitmap_scan_plan didn't recognize the equivalence of that
form with the generated indexqual. booleq() is pretty cheap so that
likely doesn't make very much difference, but it's unsightly so
let's clean it up.
To fix, add a case to predicate_implied_by() to recognize the
equivalence of such clauses. This is a relatively low-cost place to
add a check, and perhaps it will have additional use cases in future.
Richard Guo and Tom Lane, per discussion of bug #17618 from Sindy
Senorita.
Discussion: https://postgr.es/m/17618-7a2240bfaa7e84ae@postgresql.org
Instead of waking up 10 times per second to check for various timeout
conditions, keep track of when we next have periodic work to do.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA%2BhUKGJGhX4r2LPUE3Oy9BX71Eum6PBcS8L3sJpScR9oKaTVaA%40mail.gmail.com
\d+ is already able to show if a partition or a child table is
"PARTITIONED" via its relkind, hence the addition of a keyword for
"FOREIGN" in the relation description is basically free.
Author: Ian Lawrence Barwick
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAB8KJ=iwzbEz2HR9EhNxQLVhMk2G_OYtQPJ9V=jWLadseggrOA@mail.gmail.com
This change impacts pg_receivewal and pg_basebackup, for the pre-padding
with zeros of all the new non-compressed WAL segments, so as the code is
more robust on partial writes. This makes the code consistent with the
backend (XLogFileInitInternal) when wal_init_zeros is enabled for the
WAL segment initialization.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
This routine is designed to write zeros to a file using vectored I/O,
for a size given by its caller, being useful when it comes to
initializing a file with a final size already known.
XLogFileInitInternal() in xlog.c is changed to use this new routine when
initializing WAL segments with zeros (wal_init_zero enabled). Note that
the aligned buffers used for the vectored I/O writes have a size of
XLOG_BLCKSZ, and not BLCKSZ anymore, as pg_pwrite_zeros() relies on
PGAlignedBlock while xlog.c originally used PGAlignedXLogBlock.
This routine will be used in a follow-up patch to do the pre-padding of
WAL segments for pg_receivewal and pg_basebackup when these are not
compressed.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Thomas Munro, Michael
Paquier
Discussion: https://www.postgresql.org/message-id/CALj2ACUq7nAb7%3DbJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA%40mail.gmail.com
A NULL result should be reported when a stats timestamp is set to 0, but
c037471 missed that, leading to a confusing timestamp value after for
example a DML on a freshly-created relation with no scans done on it
yet.
This impacted the following attributes for two system views:
- pg_stat_all_tables.last_idx_scan
- pg_stat_all_tables.last_seq_scan
- pg_stat_all_indexes.last_idx_scan
Reported-by: Robert Treat
Analyzed-by: Peter Eisentraut
Author: Dave Page
Discussion: https://postgr.es/m/CABV9wwPzMfSaz3EfKXXDxKmMprbxwF5r6WPuxqA=5mzRUqfTGg@mail.gmail.com
MSVC does not understand that ereport(ERROR) does not return, so just
return the first enum PartitionStrategy value to keep the compiler from
complaining about the missing return.
Discussion: https://postgr.es/m/20221104161934.GB16921@telsasoft.com
Commit 4ab5dae94 broke mdunlinkfork's logic for removing additional
segments of a multi-gigabyte table, because it neglected to advance
"segno" after unlinking the first segment, in the code path where it
chooses to unlink that one immediately. Then the main remove loop
gets ENOENT at segment zero and figures it's done, so we never remove
whatever additional segments might exist.
The main problem here is with large temporary tables, but WAL replay
of a drop of a large regular table would also fail to remove extra
segments. The third case where this path is taken is for non-main
forks; but I doubt it matters for those since they probably never
exceed 1GB.
The simplest fix is just to increment segno after that unlink().
(Probably this logic could do with a more thorough rethink, but not
with mere hours to go before 15.1 wraps.)
While here, also fix an incautious assumption that
register_forget_request cannot change errno. I don't think that
that has any really bad consequences, as we'd end up trying to unlink
the zero'th segment either way, but it greatly complicates reasoning
about what could happen here. Also make a couple of other cosmetic
fixes.
Per bug #17679 from Balazs Szilfai. Back-patch into v15, as the
faulty patch was.
Discussion: https://postgr.es/m/17679-1095d04450cf6a6e@postgresql.org
The code in charge of listing and classifying a set of configuration
files in a directory was located in guc-file.l, being used currently for
GUCs under "include_dir". This code is planned to be used for an
upcoming feature able to include configuration files for ident and HBA
files from a directory, similarly to GUCs. In both cases, the file
names, suffixed by ".conf", have to be ordered alphabetically. This
logic is moved to a new file, called conffiles.c, so as it is easier to
share this facility between GUCs and the HBA/ident parsing logic.
Author: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/Y2IgaH5YzIq2b+iR@paquier.xyz
We weren't actually using the passed-down list for anything, other
than computing the new value to be passed down further. I (tgl)
probably had the idea that we'd need this data eventually; but
no use-case has emerged in a good long while, so let's just stop
expending useless cycles here.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48KLy9aBb=sZ5MoNmnqAcGHaW_JTGWLCgoE_uMW7S6C-A@mail.gmail.com
Commit aa0105141 repeated one of the oldest mistakes in our book:
thinking that OID is the same as int32. It isn't of course, and
unsurprisingly the first person who came along with a database
OID above 2 billion broke it. Repair.
Per bug #17677 from Sergey Pankov. Back-patch to v15.
Discussion: https://postgr.es/m/17677-a99fa067d7ed71c9@postgresql.org
"Triggers on partitioned tables cannot have transition tables." is
incorrect as we allow statement-level triggers on partitioned tables to
have transition tables.
This has been wrong since commit 86f575948; back-patch to v11 where that
commit came in.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAPmGK17gk4vXLzz2iG%2BG4LWRWCoVyam70nZ3OuGm1hMJwDrhcg%40mail.gmail.com
Commit f56f8f8da6 added some code in CloneFkReferencing that's way too
lax about a Constraint node it manufactures, not initializing enough
struct members -- initially_valid in particular was forgotten. This
causes some FKs in partitions added by ALTER TABLE ATTACH PARTITION to
be marked as not validated. Set initially_valid true, which fixes the
bug.
While at it, make the struct initialization more complete. Very similar
code was added in two other places by the same commit; make them all
follow the same pattern for consistency, though no bugs are apparent
there.
This bug has never been reported: I only happened to notice while
working on commit 614a406b4f. The test case that was added there with
the improper result is repaired.
Backpatch to 12.
Discussion: https://postgr.es/m/20221005105523.bhuhkdx4olajboof@alvherre.pgsql
If a syntax error occurred in a SQL-language or PL/pgSQL-language
CREATE FUNCTION or DO command executed in a logical replication worker,
we'd suffer a null pointer dereference or assertion failure. That
seems like a rather contrived case, but nonetheless worth fixing.
The cause is that function_parse_error_transpose assumes it must be
executing within the context of a Portal, but logical/worker.c
doesn't create a Portal since it's not running the standard executor.
We can just back off the hard Assert check and make it fail gracefully
if there's not an ActivePortal. (I have a feeling that the aggressive
check here was my fault originally, probably because I wasn't sure if
the case would always hold and wanted to find out. Well, now we know.)
The hazard seems to exist in all branches that have logical replication,
so back-patch to v10.
Maxim Orlov, Anton Melnikov, Masahiko Sawada, Tom Lane
Discussion: https://postgr.es/m/b570c367-ba38-95f3-f62d-5f59b9808226@inbox.ru
Discussion: https://postgr.es/m/adf0452f-8c6b-7def-d35e-ab516c80088e@inbox.ru
Casting the result of palloc etc. to the intended type is more per
project style anyway.
(The fact that cpluspluscheck doesn't notice these problems is
because it doesn't expand any macros, which seems like a troubling
shortcoming. Don't have a good idea about improving that.)
Back-patch to v13, which is as far as the patch applies cleanly;
doesn't seem worth working harder.
David Geier
Discussion: https://postgr.es/m/aa5d88a3-71f4-3455-11cf-82de0372c941@gmail.com
If we have no special-case code in s_lock.h for the current platform,
but the compiler has __sync_lock_test_and_set, use that instead of
failing. It's unlikely that anybody's __sync_lock_test_and_set
would be so awful as to be worse than our semaphore-based fallback,
but if it is, they can (continue to) use --disable-spinlocks.
This allows removal of the RISC-V special case installed by commit
c32fcac56, which generated exactly the same code but only on that
platform. Usefully, the RISC-V buildfarm animals should now test
at least the int variant of this patch.
I've manually tested both variants on ARM by dint of removing the
ARM-specific stanza. We don't want to drop that, because it already
has some special knowledge and is likely to grow more over time.
Likewise, this is not meant to preclude installing special cases
for other arches if that proves worthwhile.
Per discussion of a request to install the same code for loongarch64.
Like the previous patch, we might as well back-patch to supported
branches.
Discussion: https://postgr.es/m/761ac43d44b84d679ba803c2bd947cc0@HSMAILSVR04.hs.handsome.com.cn
Avoid having to list all the possible object types twice. Instead,
only _getObjectDescription() needs to know about specific object
types. It communicates back to _printTocEntry() whether an owner is
to be set.
In passing, remove the logic to use ALTER TABLE to set the owner of
views and sequences. This is no longer necessary. Furthermore, if
pg_dump doesn't recognize the object type, this is now a fatal error,
not a warning.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0a00f923-599a-381b-923f-0d802a727715@enterprisedb.com
Since partitions can be foreign tables not only plain tables, but
logical replication only supports plain tables, we'd better check the
relkind of a partition after we find it. (There was some discussion
of checking this when adding a partitioned table to a subscription;
but that would be inadequate since the troublesome partition could be
added later.) Without this, the situation leads to a segfault or
assertion failure.
In passing, add a separate variable for the target Relation of
a cross-partition UPDATE; reusing partrel seemed mighty confusing
and error-prone.
Shi Yu and Tom Lane, per report from Ilya Gladyshev. Back-patch
to v13 where logical replication into partitioned tables became
a thing.
Discussion: https://postgr.es/m/6b93e3748ba43298694f376ca8797279d7945e29.camel@gmail.com
Previously, the description of XLOG_RUNNING_XACTS showed only
top-transaction XIDs and whether subtransactions overflowed. This commit
improves it to show individual subtransaction XIDs. This also improves the
description of overflowed subtransactions.
This additional information can be helpful for testing and debugging
purposes.
Author: Masahiko Sawada
Reviewd by: Fujii Masao, Kyotaro Horiguchi, Ashutosh Bapat, Bharath Rupireddy
Discussion: https://postgr.es/m/CAD21AoAqvaE+XEeXHHPdAGQPcCoGXxuoeutq_nWhUSQvTt5+tA@mail.gmail.com
These two options are only available with COPY FROM, so the extra logic
in charge of checking the validity of the attributes given has no
purpose.
Author: Zhang Mingli
Reviewed-by: Richard Guo, Kyotaro Horiguchi
Discussion: https://postgr.es/m/F28F0B5A-766F-4D33-BF44-43B3A052D833@gmail.com
We have various requirements when using a dlist_head to keep track of the
number of items in the list. This, traditionally, has been done by
maintaining a counter variable in the calling code. Here we tidy this up
by adding "dclist", which is very similar to dlist but also keeps track of
the number of items stored in the list.
Callers may use the new dclist_count() function when they need to know how
many items are stored. Obtaining the count is an O(1) operation.
For simplicity reasons, dclist and dlist both use dlist_node as their node
type and dlist_iter/dlist_mutable_iter as their iterator type. dclists
have all of the same functionality as dlists except there is no function
named dclist_delete(). To remove an item from a list dclist_delete_from()
must be used. This requires knowing which dclist the given item is stored
in.
Additionally, here we also convert some dlists where additional code
exists to keep track of the number of items stored and to make these use
dclists instead.
Author: David Rowley
Reviewed-by: Bharath Rupireddy, Aleksander Alekseev
Discussion: https://postgr.es/m/CAApHDvrtVxr+FXEX0VbViCFKDGxA3tWDgw9oFewNXCJMmwLjLg@mail.gmail.com
Based on the existing coverage report, some combinations were not
checked at all, so add some tests to do so. Spotted while looking at
the area.
Discussion: https://postgr.es/m/Y2DNm9u7hzIxCXHn@paquier.xyz
DST law changes in Chile, Fiji, Iran, Jordan, Mexico, Palestine,
and Syria. Historical corrections for Chile, Crimea, Iran, and
Mexico.
Also, the Europe/Kiev zone has been renamed to Europe/Kyiv
(retaining the old name as a link).
The following zones have been merged into nearby, more-populous zones
whose clocks have agreed since 1970: Antarctica/Vostok, Asia/Brunei,
Asia/Kuala_Lumpur, Atlantic/Reykjavik, Europe/Amsterdam,
Europe/Copenhagen, Europe/Luxembourg, Europe/Monaco, Europe/Oslo,
Europe/Stockholm, Indian/Christmas, Indian/Cocos, Indian/Kerguelen,
Indian/Mahe, Indian/Reunion, Pacific/Chuuk, Pacific/Funafuti,
Pacific/Majuro, Pacific/Pohnpei, Pacific/Wake and Pacific/Wallis.
(This indirectly affects zones that were already links to one of
these: Arctic/Longyearbyen, Atlantic/Jan_Mayen, Iceland,
Pacific/Ponape, Pacific/Truk, and Pacific/Yap.) America/Nipigon,
America/Rainy_River, America/Thunder_Bay, Europe/Uzhgorod, and
Europe/Zaporozhye were also merged into nearby zones after discovering
that their claimed post-1970 differences from those zones seem to have
been errors.
While the IANA crew have been working on merging zones that have no
post-1970 differences for some time, this batch of changes affects
some zones that are significantly more populous than those merged
in the past, notably parts of Europe. The loss of pre-1970 timezone
history for those zones may be troublesome for applications
expecting consistency of timestamptz display. As an example, the
stored value '1944-06-01 12:00 UTC' would previously display as
'1944-06-01 13:00:00+01' if the Europe/Stockholm zone is selected,
but now it will read out as '1944-06-01 14:00:00+02'.
There exists a "packrat" option that will build the timezone data
files with this old data preserved, but the problem is that it also
resurrects a bunch of other, far less well-attested data; so much so
that actually more zones' contents change from 2022a with that option
than without it. I have chosen not to do that here, for that reason
and because it appears that no major OS distributions are using the
"packrat" option, so that doing so would cause Postgres' behavior
to diverge significantly depending on whether it was built with
--with-system-tzdata. However, for anyone for whom these changes pose
significant problems, there is a solution: build a set of timezone
files with the "packrat" option and use those with Postgres.
Some cases would result in "cache lookup failed for statistics object",
due to trying to fetch inherited statistics when only non-inherited
ones are available or vice versa.
Richard Guo and Justin Pryzby
Discussion: https://postgr.es/m/20221030170520.GM16921@telsasoft.com
- Add tab completion for ALTER SEQUENCE … START …
- Add tab completion for ALTER COLUMN … SET GENERATED …
- Add tab completion for ALTER COLUMN … SET <sequence option>
- Add tab completion for ALTER COLUMN … ADD GENERATED … AS IDENTITY
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Matheus Alcantara <mths.dev@pm.me>
Discussion: https://www.postgresql.org/message-id/flat/87mta1jfax.fsf@wibble.ilmari.org
Add some simple tests that the planner recognizes all the
standard idioms for SEMI and ANTI joins. Failure to optimize
in this way won't necessarily cause any visible change in
query results, so check the plans. We had no similar coverage
before, at least for some variants of antijoin, as noted by
Richard Guo.
Discussion: https://postgr.es/m/CAMbWs4-mvPPCJ1W6iK6dD5HiNwoJdi6mZp=-7mE8N9Sh+cd0tQ@mail.gmail.com
When the pg_dump 002_pg_dump.pl test generates the command to load the
schema, it does
# Add terminating semicolon
$create_sql{$test_db} .= $tests{$test}->{create_sql} . ";";
In some cases, this creates a duplicate semicolon, but more
importantly, this doesn't add any newline. So if you look at the
result in either the server log or in
tmp_check/log/regress_log_002_pg_dump, it looks like a complete mess.
This patch makes the output look cleaner for manual inspection: add
semicolon only if necessary, and add two newlines.
Discussion: https://www.postgresql.org/message-id/flat/d6aec95a-8729-43cc-2578-f2a5e46640e0%40enterprisedb.com
This commit adds a function to perform a cross-check between the initial
value of the C declaration associated to a GUC and its actual boot
value in assert-enabled builds. The purpose of this is to prevent
anybody reading these C declarations from being fooled by mismatched
values before they are loaded at program startup.
The following rules apply depending on the GUC type:
* bool - can be false, or same as boot_val.
* int - can be 0, or same as the boot_val.
* real - can be 0.0, or same as the boot_val.
* string - can be NULL, or strcmp'd equal to the boot_val.
* enum - equal to the boot_val.
This is done for the system as well custom GUCs loaded by external
modules, which may require extension developers to adapt the C
declaration of the variables used by these GUCs (testing this change
with some of my own modules has allowed me to catch some stupid typos,
FWIW). This may finish by being a bad experiment depending on the
feedbcak received, but let's see how it goes.
Author: Peter Smith
Reviewed-by: Nathan Bossart, Tom Lane, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
When all of the query's DISTINCT pathkeys have been marked as redundant
due to EquivalenceClasses existing which contain constants, we can just
implement the DISTINCT operation on a query by just limiting the number of
returned rows to 1 instead of performing a Unique on all of the matching
(duplicate) rows.
This applies in cases such as:
SELECT DISTINCT col,col2 FROM tab WHERE col = 1 AND col2 = 10;
If there are any matching rows, then they must all be {1,10}. There's no
point in fetching all of those and running a Unique operator on them to
leave only a single row. Here we effectively just find the first row and
then stop. We are obviously unable to apply this optimization if either
the col = 1 or col2 = 10 were missing from the WHERE clause or if there
were any additional columns in the SELECT clause.
Such queries are probably not all that common, but detecting when we can
apply this optimization amounts to checking if the distinct_pathkeys are
NULL, which is very cheap indeed.
Nothing is done here to check if the query already has a LIMIT clause. If
it does then the plan may end up with 2 Limits nodes. There's no harm in
that and it's probably not worth the complexity to unify them into a
single Limit node.
Author: David Rowley
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/CAApHDvqS0j8RUWRUSgCAXxOqnYjHUXmKwspRj4GzVfOO25ByHA@mail.gmail.com
Discussion: https://postgr.es/m/MEYPR01MB7101CD5DA0A07C9DE2B74850A4239@MEYPR01MB7101.ausprd01.prod.outlook.com
Here we add a new 'copy' parameter to tuplesort_getdatum so that we can
instruct the function not to datumCopy() byref Datums before returning.
Similar to 91e9e89dc, this can provide significant performance
improvements in nodeSort when sorting by a single byref column and the
sort's targetlist contains only that column.
This allows us to re-enable Datum sorts for byref types which was disabled
in 3a5817695 due to a reported memory leak.
Additionally, here we slightly optimize DISTINCT aggregates so that we no
longer perform any datumCopy() when we find the current value not to be
distinct from the previous value. Previously the code would always take a
copy of the most recent Datum and pfree the previous value, even when the
values were the same. Testing shows a small but noticeable performance
increase when aggregate transitions are skipped due to the current
transition value being the same as the prior one.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqS6wC5U==k9Hd26E4EQXH3QR67-T4=Q1rQ36NGvjfVSg@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvqHonfe9G1cVaKeHbDx70R_zCrM3qP2AGXpGrieSKGnhA@mail.gmail.com
When we decide we need to make a derived clause equating a.x and
b.y, we already will re-use a previously-made clause "a.x = b.y".
But we might instead have "b.y = a.x", which is perfectly usable
because equivclass.c has never promised anything about the
operand order in clauses it builds. Saving construction of a
new RestrictInfo doesn't matter all that much in itself --- but
because we cache selectivity estimates and so on per-RestrictInfo,
there's a possibility of saving a fair amount of duplicative
effort downstream.
Hence, check for commutative matches as well as direct ones when
seeing if we have a pre-existing clause. This changes the visible
clause order in several regression test cases, but they're all
clearly-insignificant changes.
Checking for the reverse operand order is simple enough, but
if we wanted to check for operator OID match we'd need to call
get_commutator here, which is not so cheap. I concluded that
we don't really need the operator check anyway, so I just
removed it. It's unlikely that an opfamily contains more than
one applicable operator for a given pair of operand datatypes;
and if it does they had better give the same answers, so there
seems little need to insist that we use exactly the one
select_equality_operator chose.
Using the current core regression suite as a test case, I see
this change reducing the number of new join clauses built by
create_join_clause from 9673 to 5142 (out of 26652 calls).
So not quite 50% savings, but pretty close to it.
Discussion: https://postgr.es/m/78062.1666735746@sss.pgh.pa.us
This commit moves pg_pwritev_with_retry(), a convenience wrapper of
pg_writev() able to handle partial writes, to common/file_utils.c so
that the frontend code is able to use it. A first use-case targetted
for this routine is pg_basebackup and pg_receivewal, for the
zero-padding of a newly-initialized WAL segment. This is used currently
in the backend when the GUC wal_init_zero is enabled (default).
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Thomas Munro
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
As the recent commit 05d4cbf (reverted after as a448e49) has proved,
there is zero coverage for the four SQL functions that can scan the
control file data:
- pg_control_checkpoint()
- pg_control_init()
- pg_control_recovery()
- pg_control_system()
This commit adds a minimal coverage for these functions, checking that
their execution is able to complete. This would have been enough to
catch the problems introduced in the commit mentioned above. More
checks could be done for each individual fields, but it is unclear
whether this would be better than the other checks in place in the
backend code.
Per discussion with Bharath Rupireddy.
Discussion: https://postgr.es/m/Y1d2FZmQmyAhPSRG@paquier.xyz
These numbers are strictly-monotone identifiers assigned to each rule
of pg_hba_file_rules and each map of pg_ident_file_mappings when loading
the HBA and ident configuration files, indicating the order in which
they are checked at authentication time, until a match is found.
With only one file loaded currently, this is equivalent to the line
numbers assigned to the entries loaded if one wants to know their order,
but this becomes mandatory once the inclusion of external files is
added to the HBA and ident files to be able to know in which order the
rules and/or maps are applied at authentication. Note that NULL is used
when a HBA or ident entry cannot be parsed or validated, aka when an
error exists, contrary to the line number.
Bump catalog version.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The intention behind 1b73d0b was to limit the use of TokenizedAuthLine,
but I have fat-fingered one location in parse_hba_line() when creating
the HbaLine, where this should use the local variable and not the value
coming from TokenizedAuthLine. This logic is the exactly the same, but
let's be clean about all that on consistency grounds.
Reported-by: Julien Rouhaud
Discussion: https://postgr.es/m/20221026032730.k3sib5krgm7l6njk@jrouhaud
This has the advantage to limit the presence of the GUC values
hba_file and ident_file to the code paths where these files are loaded,
easing the introduction of an upcoming feature aimed at adding inclusion
logic for files and directories in HBA and ident files.
Note that this needs the addition of the source file name to HbaLine, in
addition to the line number, which is something needed by the backend in
two places of auth.c (authentication failure details and auth_id log
when log_connections is enabled).
While on it, adjust a log generated on authentication failure to report
the name of the actual HBA file on which the connection attempt matched,
where the line number and the raw line written in the HBA file were
already included. This was previously hardcoded as pg_hba.conf, which
would be incorrect when a custom value is used at postmaster startup for
the GUC hba_file.
Extracted from a larger patch by the same author.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The IsCTIDVar() tests in nodeTidscan.c and nodeTidrangescan.c
look buggy at first sight: they aren't checking that the varno
matches the table to be scanned. Actually they're safe because
any Var in a scan-level qual must be for the correct table ...
but if we're depending on that, it's pretty pointless to verify
varlevelsup. (Besides which, varlevelsup is *always* zero at
execution, since we've flattened the rangetable long since.)
Remove the useless varlevelsup check, and instead add some
commentary explaining why we don't need to check varno.
Noted while fooling with a planner change that causes the order
of "t1.ctid = t2.ctid" to change in some tidscan.sql tests;
I was briefly fooled into thinking there was a live bug here.
This adjusts a few things for GUCs related to logical replication,
replication slots and WAL senders, in the shape of incorrect comments
and values inconsistent with their initial default value.
Author: Peter Smith
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
Commit f357233c assumed that it was OK to return ENOENT directly if
lstat() failed that way. If we got STATUS_DELETE_PENDING while trying
to unlink a file that we had already unlinked successfully once before
but someone else still had open (on a kernel version that has "pending"
unlinks by default), then we would no longer reach the retry loop in
pgunlink(). That loop claims to be only for handling sharing violations
(a different phenomenon), but the errno is the same.
Restore that behavior with an explicit check, to see if it fixes the
occasional 'directory not empty' failures seen in the pg_upgrade tests
on CI. Further improvements are possible with proposed upgrades to
modern Windows APIs that would replace this convoluted code.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220920013122.GA31833%40telsasoft.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Commit c5cb8f3b supposed that we'd only ever have to follow one junction
point in stat(), because we don't construct longer chains of them ourselves.
When examining a parent directory supplied by the user, we should really be
able to cope with longer chains, just in case someone has their system
set up that way. Choose an arbitrary cap of 8, to match the minimum
acceptable value of SYMLOOP_MAX in POSIX.
Previously I'd avoided reporting ELOOP thinking Windows didn't have it,
but it turns out that it does, so we can use the proper error number.
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/CA%2BhUKGJ7JDGWYFt9%3D-TyJiRRy5q9TtPfqeKkneWDr1XPU1%2Biqw%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Since commit c5cb8f3b taught stat() to follow symlinks, and since initdb
uses pg_mkdir_p(), and that examines parent directories, our humble
readlink() implementation can now be exposed to junction points not of
PostgreSQL origin. Those might be corrupted by our naive path mangling,
which doesn't really understand NT paths in general.
Simply decline to transform paths that don't look like a drive absolute
path. That means that readlink() returns the NT path directly when
checking a parent directory of PGDATA that happen to point to a drive
using "rooted" format. That works for the purposes of our stat()
emulation.
Reported-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/4590c37927d7b8ee84f9855d83229018%40postgrespro.ru
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
When using junction points to emulate symlinks on Windows, one edge case
was not handled correctly by commit c5cb8f3b: if a junction point is
broken (pointing to a non-existent path), we'd report ENOENT. This
doesn't break any known use case, but was noticed while developing a
test suite for these functions and is fixed here for completeness.
Also add translation ERROR_CANT_RESOLVE_FILENAME -> ENOENT, as that is
one of the errors Windows can report for some kinds of broken paths.
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Commit df3737a651 added an incorrect assertion about the preconditions
for invoking the backup cleanup callback: it misfires at session end in
case a backup completes successfully. Fix it, using coding from Michaël
Paquier. Also add some tests for the various cases.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20221021.161038.1277961198945653224.horikyota.ntt@gmail.com
While looking at how these are handled in the parser and the executor, I
have noticed that there is no test coverage for most of these when
reverse-engineering an expression for a SQLValueFunction node in
ruleutils.c, including how these are reparsed when included in a FROM
clause. Some hacking in this area has showed me that these could break
easily, so add some coverage to track the existing compatibility.
Extracted from a much larger patch by me.
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
The new tests have been reporting a warning hidden in the logs, as of
"Odd number of elements in hash assignment" (perlcritic or similar did
not report an issue, actually). This comes down to a typo in the test
"matching regexp for username" for a double-quoted regexp using commas,
where we passed an extra argument. The test is intended to pass, but
this was causing the test to fail. This also pointed out that the
newly-added role "md5,role" lacks an entry in the password file used to
provide the password, so add one.
While on it, make the tests pickier by checking the contents of the logs
generated on successful authentication.
Oversights in 8fea868.
As of this commit, any database or user entry beginning with a slash (/)
is considered as a regular expression. This is particularly useful for
users, as now there is no clean way to match pattern on multiple HBA
lines. For example, a user name mapping with a regular expression needs
first to match with a HBA line, and we would skip the follow-up HBA
entries if the ident regexp does *not* match with what has matched in
the HBA line.
pg_hba.conf is able to handle multiple databases and roles with a
comma-separated list of these, hence individual regular expressions that
include commas need to be double-quoted.
At authentication time, user and database names are now checked in the
following order:
- Arbitrary keywords (like "all", the ones beginning by '+' for
membership check), that we know will never have a regexp. A fancy case
is for physical WAL senders, we *have* to only match "replication" for
the database.
- Regular expression matching.
- Exact match.
The previous logic did the same, but without the regexp step.
We have discussed as well the possibility to support regexp pattern
matching for host names, but these happen to lead to tricky issues based
on what I understand, particularly with host entries that have CIDRs.
This commit relies heavily on the refactoring done in a903971 and
fc579e1, so as the amount of code required to compile and execute
regular expressions is now minimal. When parsing pg_hba.conf, all the
computed regexps needs to explicitely free()'d, same as pg_ident.conf.
Documentation and TAP tests are added to cover this feature, including
cases where the regexps use commas (for clarity in the docs, coverage
for the parsing logic in the tests).
Note that this introduces a breakage with older versions, where a
database or user name beginning with a slash are treated as something to
check for an equal match. Per discussion, we have discarded this as
being much of an issue in practice as it would require a cluster to
have database and/or role names that begin with a slash, as well as HBA
entries using these. Hence, the consistency gained with regexps in
pg_ident.conf is more appealing in the long term.
**This compatibility change should be mentioned in the release notes.**
Author: Bertrand Drouvot
Reviewed-by: Jacob Champion, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
It's unclear why a separate type would be needed here. We use plain
pid_t (or int) everywhere else.
(The only relevant platform where pid_t is not int is 64-bit MinGW,
where it is long long int. So defining pid_t as long (which is 32-bit
on Windows), as was done here, doesn't even accommodate that one.)
Reverts 66fa6eba5a.
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
Because of a small thinko in 7844c9918a,
psql -c would exit successfully when a query is canceled. Fix this so
that it exits with a nonzero status, just like for all other errors.
Since pg_backup_start() and pg_backup_stop() exist, the tablespace map
data and the backup state data (backup_label string until 7d70809) have
been allocated in the TopMemoryContext. This approach would cause
memory leaks in the session calling these functions if failures happen
before pg_backup_stop() ends, leaking more memory on repeated failures.
Both things need little memory so that would not be really noticeable
for most users, except perhaps connection poolers with long-lived
connections able to trigger backup failures with these functions.
This commit improves the logic in this area by not allocating anymore
the backup-related data that needs to travel across the SQL-callable
backup functions in TopMemoryContext, by using instead a dedicated
memory context child of TopMemoryContext. The memory context is created
in pg_backup_start() and deleted when finishing pg_backup_stop(). In
the event of an in-flight failure, this memory context gets reset in the
follow-up pg_backup_start() call, so as we are sure that only one run
worth of data is leaked at any time. Some cleanup was already done for
the backup data on a follow-up call of pg_backup_start(), but using a
memory context makes the whole simpler.
BASE_BACKUP commands are executed in isolation, relying on the memory
context created for replication commands, hence these do not need such
an extra logic.
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Alvaro Herrera, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXqvfKF2B0beQ=aJMdWnpNohmBPsRg=EDQj_6y1t2O8mQ@mail.gmail.com
Specifically, when pg_basebackup is invoked with -Tx=y, don't error
out if x could plausibly be an absolute path either on Windows or on
non-Windows systems. We don't know whether the remote system is
running the same OS as the local system, so it's not appropriate to
assume that our local rule about absolute pathnames is the same as
the rule on the remote system.
Patch by me, reviewed by Tom Lane, Andrew Dunstan, and
Davinder Singh.
Discussion: http://postgr.es/m/CA+TgmoY+jC3YiskomvYKDPK3FbrmsDU7_8+wMHt02HOdJeRb0g@mail.gmail.com
It happens that the parts of hba.conf that are planned to be extended
to support regular expressions would finish by using the same error
message as the one used currently for pg_ident.conf when a regular
expression cannot be compiled, as long as the routine centralizing the
logic, regcomp_auth_token(), knows from which file the regexp comes from
and its line location in the so-said file.
This change makes the follow-up patches slightly simpler, and the logic
remains the same. I suspect that this makes the proposal to add support
for file inclusions in pg_ident.conf and pg_hba.conf slightly simpler,
as well.
Extracted from a larger patch by the same author. This is similar to
the refactoring done in fc579e1.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
Various test suites use the "openssl" program as part of their setup.
There isn't a way to override which openssl program is to be used,
other than by fiddling with the path, perhaps. This has gotten
increasingly problematic because different versions of openssl have
different capabilities and do different things by default.
This patch checks for an openssl binary in configure and meson setup,
with appropriate ways to override it. This is similar to how "lz4"
and "zstd" are handled, for example. The meson build system actually
already did this, but the result was only used in some places. This
is now applied more uniformly.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/dc638b75-a16a-007d-9e1c-d16ed6cf0ad2%40enterprisedb.com
This makes the choice of result scale of numeric power() for integer
exponents consistent with the choice for non-integer exponents, and
with the result scale of other numeric functions. Specifically, the
result scale will be at least as large as the scale of either input,
and sufficient to ensure that the result has at least 16 significant
digits.
Formerly, the result scale was based only on the scale of the first
input, without taking into account the weight of the result. For
results with negative weight, that could lead to results with very few
or even no non-zero significant digits (e.g., 10.0 ^ (-18) produced
0.0000000000000000).
Fix this by moving responsibility for the choice of result scale into
power_var_int(), which already has code to estimate the result weight.
Per report by Adrian Klaver and suggested fix by Tom Lane.
No back-patch -- arguably this is a bug fix, but one which is easy to
work around, so it doesn't seem worth the risk of changing query
results in stable branches.
Discussion: https://postgr.es/m/12a40226-70ac-3a3b-3d3a-fdaf9e32d312%40aklaver.com
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
Set up a signal handler for INT/TERM so that we run our END block if we
get them. In END, if the exit status indicates a problem, call
_update_pid(-1) to improve chances of the stop working in case start()
hasn't returned yet.
Also, change END's teardown_node() so that it passes fail_ok=>1, so that
if a node fails to stop, we still stop the other nodes in the same test.
Per complaint from Andres Freund.
This doesn't seem important enough to backpatch, at least for now.
Discussion: https://postgr.es/m/20220930040734.mbted42oiynhn2t6@awork3.anarazel.de
After commit 39969e2a1e, ->forcePageWrites is no longer very
interesting: we can just test whether runningBackups is different from 0.
This simplifies some code, so do away with it.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/39969e2a1e4d7f5a37f3ef37d53bbfe171e7d77a
We had two copies of almost identical logic to revert shared memory
state when a running backup aborts; we can remove
pg_backup_start_callback if we adapt do_pg_abort_backup so that it can
be used for this purpose too.
However, in order for this to work, we have to repurpose the flag passed
to do_pg_abort_backup. It used to indicate whether to throw a warning
(and the only caller always passed true). It now indicates whether the
callback is being called at start time (in which case the session backup
state is known not to have been set to RUNNING yet, so action is always
taken) or shmem time (in which case action is only taken if the session
backup state is RUNNING). Thus the meaning of the flag is no longer
superfluous, but it's actually quite critical to get right. I (Álvaro)
chose to change the polarity and the code flow re. the flag from what
Bharath submitted, for coding clarity.
Co-authored-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/20221013111330.564fk5tkwe3ha77l%40alvherre.pgsql
As currently designed, with a callback registered in a ERROR_CLEANUP
block, the shutdown callback would get called twice when updating
archive_library on SIGHUP, which is something that we want to avoid to
ease the life of extension writers.
Anyway, an ERROR in the archiver process is treated as a FATAL, stopping
it immediately, hence there is no need for a ERROR_CLEANUP block.
Instead of that, the shutdown callback is not called upon
before_shmem_exit(), giving to the modules the opportunity to do any
cleanup actions before the server shuts down its subsystems.
While on it, this commit adds some testing coverage for the shutdown
callback. Neither shell_archive nor basic_archive have been using it,
and one is added to shell_archive, whose trigger is checked in a TAP
test through a shutdown sequence.
Author: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20221015221328.GB1821022@nathanxps13
Backpatch-through: 15
make_ctags did not include field members of structs since the commit
964d01ae90.
For example, in the following field of RestrictInfo:
Selectivity norm_selec pg_node_attr(equal_ignore);
pg_node_attr was mistakenly interpreted to be the name of the field.
To fix this, add -I option to ctags command if the command is
Exuberant ctags or Universal ctags (for plain old ctags, struct
members are not included in the tags file anyway).
Also add "-e" and "-n" options to make_ctags. The -e option invokes
ctags command with -e option, which produces TAGS file for emacs. This
allows to eliminate duplicate codes in make_etags so that make_etags
just exec make_ctags with -e option.
The -n option allows not to produce symbolic links in each
sub directory (the default is producing symbolic links).
Author: Yugo Nagata
Reviewers: Alvaro Herrera, Tatsuo Ishii
Discussion: https://postgr.es/m/flat/20221007154442.76233afc7c5b255c4de6528a%40sraoss.co.jp
AuthToken gains a regular expression, and IdentLine is changed so as it
uses an AuthToken rather than tracking separately the ident user string
used for the regex compilation and its generated regex_t. In the case
of pg_ident.conf, a set of AuthTokens is built in the pre-parsing phase
of the file, and an extra regular expression is compiled when building
the list of IdentLines, after checking the sanity of the fields in a
pre-parsed entry.
The logic in charge of computing and executing regular expressions is
now done in a new set of routines called respectively
regcomp_auth_token() and regexec_auth_token() that are wrappers around
pg_regcomp() and pg_regexec(), working on AuthTokens. While on it, this
patch adds a routine able to free an AuthToken, free_auth_token(), to
simplify a bit the logic around the requirement of using a specific free
routine for computed regular expressions. Note that there are no
functional or behavior changes introduced by this commit.
The goal of this patch is to ease the use of regular expressions with
more items of pg_hba.conf (user list, database list, potentially
hostnames) where AuthTokens are used extensively. This will be tackled
later in a separate patch.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
Preprocessing of the HAVING clause will reduce havingQual to NIL
if the clause is constant-TRUE. This is one case where that
convention is rather unfortunate, because "HAVING TRUE" is not at all
the same as not having any HAVING clause at all. (Per the SQL spec,
it still forces the query to be grouped.) The planner deals with this
by having a boolean hasHavingQual that records whether havingQual was
originally nonempty; places that just want to check whether HAVING
was specified are supposed to consult that.
I found three places that got that wrong. Fortunately, these could
only affect cost estimates not correctness. It'd be hard even
to demonstrate the errors; for example, the one in allpaths.c would
only matter in a query that has HAVING TRUE but no GROUP BY and no
aggregates, which would require a completely variable-free SELECT
list, making the case probably of only academic interest. Hence,
while these are worth fixing before someone copies the incorrect
coding somewhere more critical, they don't seem worth back-patching.
I didn't bother trying to devise regression tests, either.
Discussion: https://postgr.es/m/2503888.1666042643@sss.pgh.pa.us
The original hint says to use SET PUBLICATION when really ADD/DROP
PUBLICATION is called for, so this is arguably a bug fix.
Also, a very similar message elsewhere was using an inconsistent
SQLSTATE.
While at it, unwrap some strings.
Backpatch to 15.
Author: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/OS0PR01MB57160AD0E7386547BA978EB394299@OS0PR01MB5716.jpnprd01.prod.outlook.com
These routines have been renamed in a19e5ce. There is no need to keep
the compatibility declarations on HEAD, as once an extension moves to
the new routine name when compiling with v16~ the code would work the
same way when recompiled on v15. No backpatch to v15 for this one,
because ABI compatibility has to be maintained there.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
When creating a cast that uses a conversion function, we've
historically allowed the input and result types to be
binary-compatible with the function's input and result types,
rather than necessarily being identical. This means that the new
cast is logically dependent on the binary-compatible cast or casts
that it references: if those are defined by pg_cast entries, and you
try to restore the new cast without having defined them, it'll fail.
Hence, we should make pg_depend entries to record these dependencies
so that pg_dump knows that there is an ordering requirement.
This is not the only place where we allow such shortcuts; aggregate
functions for example are similarly lax, and in principle should gain
similar dependencies. However, for now it seems sufficient to fix
the cast-versus-cast case, as pg_dump's other ordering heuristics
should keep it out of trouble for other object types.
Per report from David Turoň; thanks also to Robert Haas for
preliminary investigation. I considered back-patching, but
seeing that this issue has existed for many years without
previous reports, it's not clear it's worth the trouble.
Moreover, back-patching wouldn't be enough to ensure that the
new pg_depend entries exist in existing databases anyway.
Discussion: https://postgr.es/m/OF0A160F3E.578B15D1-ONC12588DA.003E4857-C12588DA.0045A428@notes.linuxbox.cz
DefineQueryRewrite() has long required that ON SELECT rules be named
"_RETURN". But we overlooked the converse case: we should forbid
non-ON-SELECT rules that are named "_RETURN". In particular this
prevents using CREATE OR REPLACE RULE to overwrite a view's _RETURN
rule with some other kind of rule, thereby breaking the view.
Per bug #17646 from Kui Liu. Back-patch to all supported branches.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
The executor will dump core if it's asked to execute a seqscan on
a relation having no table AM, such as a view. While that shouldn't
really happen, it's possible to get there via catalog corruption,
such as a missing ON SELECT rule. It seems worth installing a defense
against that. There are multiple plausible places for such a defense,
but I picked the planner's get_relation_info().
Per discussion of bug #17646 from Kui Liu. Back-patch to v12 where
the tableam APIs were introduced; in older versions you won't get a
SIGSEGV, so it seems less pressing.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
There is already some coverage for that in the kerberos test suite,
though it requires PG_TEST_EXTRA to be set as per its insecure nature.
This provides coverage in a default setup, as long as peer is supported
on the platform where its test is run.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/7f87ca27-e184-29da-15d6-8be4325ad02e@gmail.com
If the non-recursive term of a SEARCH BREADTH FIRST recursive
query has only constants in its target list, the planner will
fold the starting RowExpr added by rewrite into a simple Const
of type RECORD. The executor doesn't have any problem with
that --- but EXPLAIN VERBOSE will encounter the Const as the
ultimate source of truth about what the field names of the
SET column are, and it didn't know what to do with that.
Fortunately, we can pull the identifying typmod out of the
Const, in much the same way that record_out would.
For reasons that remain a bit obscure to me, this only fails
with SEARCH BREADTH FIRST, not SEARCH DEPTH FIRST or CYCLE.
But I added regression test cases for both of those options
too, just to make sure we don't break it in future.
Per bug #17644 from Matthijs van der Vleuten. Back-patch
to v14 where these constructs were added.
Discussion: https://postgr.es/m/17644-3bd1f3036d6d7a16@postgresql.org
In the latest version of Apple's macOS SDK, <sys/socket.h>
fails to compile if "REF" is #define'd as something.
Apple may or may not agree that this is a bug, and even if
they do accept the bug report I filed, they probably won't
fix it very quickly. In the meantime, our back branches will all
fail to compile gram.y. v15 and HEAD currently escape the problem
thanks to the refactoring done in 98e93a1fc, but that's purely
accidental. Moreover, since that patch removed a widely-visible
inclusion of <netdb.h>, back-patching it seems too likely to break
third-party code.
Instead, change the token's code name to REF_P, following our usual
convention for naming parser tokens that are likely to have symbol
conflicts. The effects of that should be localized to the grammar
and immediately surrounding files, so it seems like a safer answer.
Per project policy that we want to keep recently-out-of-support
branches buildable on modern systems, back-patch all the way to 9.2.
Discussion: https://postgr.es/m/1803927.1665938411@sss.pgh.pa.us
snprintf.c has always fallen back on libc's *printf implementation
when printing pointers (%p) and floats. When this code originated,
we were still supporting some platforms that lacked native snprintf,
so we used sprintf for that. That's not actually unsafe in our usage,
but nonetheless builds on macOS are starting to complain about sprintf
being unconditionally deprecated; and I wouldn't be surprised if other
platforms follow suit. There seems little reason to believe that any
platform supporting C99 wouldn't have standards-compliant snprintf,
so let's just use that instead to suppress such warnings.
Back-patch to v12, which is where we started to require C99. It's
also where we started to use our snprintf.c everywhere, so this
wouldn't be enough to suppress the warning in older branches anyway
--- that is, in older branches these aren't necessarily all our
usages of libc's sprintf. It is enough in v12+ because any
deprecation annotation attached to libc's sprintf won't apply to
pg_sprintf. (Whether all our usages of pg_sprintf are adequately
safe is not a matter I intend to address here, but perhaps it could
do with some review.)
Per report from Andres Freund and local testing.
Discussion: https://postgr.es/m/20221015211955.q4cwbsfkyk3c4ty3@awork3.anarazel.de
While directly targetting a foreign table with MERGE was already
expressly forbidden, we failed to catch the case of a partitioned table
that has a foreign table as a partition; and the result if you try is an
incomprehensible error. Fix that by adding a specific check.
Backpatch to 15.
Reported-by: Tatsuhiro Nakamori <bt22nakamorit@oss.nttdata.com>
Discussion: https://postgr.es/m/bt22nakamorit@oss.nttdata.com
It can be useful to know when a relation has last been used, e.g., when
evaluating whether an index is still required. It was already possible to
infer the time of the last usage by tracking, e.g.,
pg_stat_all_indexes.idx_scan over time. But far from everybody does so.
To make it easier to detect the last time a relation has been scanned, track
that time in each relation's pgstat entry. To minimize overhead a) the
timestamp is updated only when the backend pending stats entry is flushed to
shared stats b) the last transaction's stop timestamp is used as the
timestamp.
Bumps catalog and stats format versions.
Author: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bruce Momjian <bruce@momjian.us>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/CA+OCxozrVHNFVEPkweUHMZje+t1tfY816d9MZYc6eZwOOusOaQ@mail.gmail.com
Previously GetCurrentTransactionStopTimestamp() computed a new timestamp
whenever xactStopTimestamp was unset and xactStopTimestamp was only set when a
commit or abort record was written.
An upcoming patch will add additional calls to
GetCurrentTransactionStopTimestamp() from pgstats. To avoid computing
timestamps multiple times, set xactStopTimestamp in
GetCurrentTransactionStopTimestamp() if not already set.
Author: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/20220906155325.an3xesq5o3fq36gt%40awork3.anarazel.de
When a query whose results were requested in single-row mode is the last
in the queue by the time those results are being read, the single-row
flag was not being reset, because we were returning early from
pqPipelineProcessQueue. Move that stanza up so that the flag is always
reset at the end of sending that query's results.
Add a test for the situation.
Backpatch to 14.
Author: Denis Laxalde <denis.laxalde@dalibo.com>
Discussion: https://postgr.es/m/01af18c5-dacc-a8c8-07ee-aecc7650c3e8@dalibo.com
The previous patch made addition of new GUCs cheap, but other GUC
operations aren't improved and indeed get a bit slower, because
hash_seq_search() is slower than just scanning a pointer array.
However, most performance-critical GUC operations only need
to touch a relatively small fraction of the GUCs; especially
so for AtEOXact_GUC(). We can improve matters at the cost
of a bit more space by adding dlist or slist links to the
GUC data structures. This patch invents lists that track
(1) all GUCs with non-default "source";
(2) all GUCs with nonempty state stack (implying they've
been changed in the current transaction);
(3) all GUCs due for reporting to the client.
All of guc.c's performance-critical cases can make use of one or
another of these lists to avoid searching the whole hash table.
In particular, the stack list means that transaction end
doesn't take time proportional to the number of GUCs, but
only to the number changed in the current transaction.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
This gets rid of bsearch() in favor of hashed lookup. The main
advantage is that it becomes far cheaper to add new GUCs, since
we needn't re-sort the pointer array. Adding N new GUCs had
been O(N^2 log N), but now it's closer to O(N). We need to
sort only in SHOW ALL and equivalent functions, which are
hopefully not performance-critical to anybody.
Also, merge GetNumConfigOptions() into get_guc_variables(),
because in a world where the set of GUCs isn't fairly static
you really want to consider those two results as tied together
not independent.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
The only real argument for using malloc directly was that we needed
the ability to not throw error on OOM; but mcxt.c grew that feature
awhile ago.
Keeping the data in a memory context improves accountability and
debuggability --- for example, without this it's almost impossible
to detect memory leaks in the GUC code with anything less costly
than valgrind. Moreover, the next patch in this series will add a
hash table for GUC lookup, and it'd be pretty silly to be using
palloc-dependent hash facilities alongside malloc'd storage of the
underlying data.
This is a bit invasive though, in particular causing an API break
for GUC check hooks that want to modify the GUC's value or use an
"extra" data structure. They must now use guc_malloc() and
guc_free() instead of malloc() and free(). Failure to change
affected code will result in assertion failures or worse; but
thanks to recent effort in the mcxt infrastructure, it shouldn't
be too hard to diagnose such oversights (at least in assert-enabled
builds).
One note is that this changes ParseLongOption() to return short-lived
palloc'd not malloc'd data. There wasn't any caller for which the
previous definition was better.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
We lack a version of repalloc() that supports MCXT_ALLOC_NO_OOM
semantics, so invent repalloc_extended() with the usual set of
flags. repalloc_huge() becomes a legacy wrapper for that.
Also, fix dynahash.c so that it can support HASH_ENTER_NULL
requests when using the default palloc-based allocator.
The only reason it didn't do that already was the lack of the
MCXT_ALLOC_NO_OOM option when that code was written, ages ago.
While here, simplify a few overcomplicated tests in mcxt.c.
Discussion: https://postgr.es/m/2982579.1662416866@sss.pgh.pa.us
Most code prints PIDs as %d, but some code tried to print them as long
or unsigned long. While this is in theory allowed, the fact that PIDs
fit into int is deeply baked into all PostgreSQL code, so these random
deviations don't accomplish anything except confusion.
Note that we still need casts from pid_t to int, because on 64-bit
MinGW, pid_t is long long int. (But per above, actually supporting
that range in PostgreSQL code would be major surgery and probably not
useful.)
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
The comment talked about some Asserts which did not exist and also a
variable name which seems to have long since disappeared.
Rewrite the comment in a way that will hopefully stand the test of
time and inform people why we always write "INSERT 0 <nrows>" instead of
"INSERT <nrows>" in the command completion tag for INSERT.
Reviewed-by: Mark Dilger
Discussion: https://postgr.es/m/CAApHDvpiUg09AvvGAVopNAKemA9z-kCmt7Fi6HKauc32bKzx4w@mail.gmail.com
In FIPS mode, these calls will fail. By having them in a separate
file, it would make it easier to have an alternative output file or
selectively disable these tests. This isn't done here; this is just
some preparation.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/647f6cc1-473d-f788-ade0-c09201e5ab6a@enterprisedb.com
Commit 3d956d956 allowed the COPY, but it's done by inserting individual
rows to the foreign table, so it can be inefficient due to the overhead
caused by each round-trip to the foreign server. To improve performance
of the COPY in such a case, this patch allows batch insertion, by
extending the multi-insert machinery in CopyFrom() to the foreign-table
case so that we insert multiple rows to the foreign table at once using
the FDW callback routine added by commit b663a4136. This patch also
allows this for postgres_fdw. It is enabled by the "batch_size" option
added by commit b663a4136, which is disabled by default.
When doing batch insertion, we update progress of the COPY command after
performing the FDW callback routine, to count rows not suppressed by the
FDW as well as a BEFORE ROW INSERT trigger. For consistency, this patch
changes the timing of updating it for plain tables: previously, we
updated it immediately after adding each row to the multi-insert buffer,
but we do so only after writing the rows stored in the buffer out to the
table using table_multi_insert(), which I think would be consistent even
with non-batching mode, because in that mode we update it after writing
each row out to the table using table_tuple_insert().
Andrey Lepikhov, heavily revised by me, with review from Ian Barwick,
Andrey Lepikhov, and Zhihong Yu.
Discussion: https://postgr.es/m/bc489202-9855-7550-d64c-ad2d83c24867%40postgrespro.ru
Contrary to what is documented in src/backend/access/transam/README,
ginHeapTupleFastInsert() had a few ordering issues with the way it does
its WAL operations when inserting items in its fast path.
First, when using a separate list, XLogBeginInsert() was being always
called before START_CRIT_SECTION(), and in this case a second thing was
wrong when merging lists, as an exclusive lock was taken on the tail
page *before* calling XLogBeginInsert(). Finally, when inserting items
into a tail page, the order of XLogBeginInsert() and
START_CRIT_SECTION() was reversed. This commit addresses all these
issues by moving the calls of XLogBeginInsert() after all the pages
logged are locked and pinned, within a critical section.
Author: Matthias van de Meent, Zhang Mingli
Discussion: https://postgr.es/m/CAEze2WhL8uLMqynnnCu1LAPwxD5RKEo0nHV+eXGg_N6ELU88HQ@mail.gmail.com
This file needs xlogreader.h only for the XLogReaderState typedef; but
we can dodge that by forward-declaring it. Many files use xlog.h for
reasons other than reading WAL, and it's not good to force all those
files to include xlogreader.h, so take it out.
Surprisingly, there is no fallout in core code from making this change.
Perhaps external code will have to start including xlogreader.h.
An LSN was calculated from a segment number, a segment size and a
position offset, matching exactly the LSN given by the caller of
XLogReaderValidatePageHeader(). This change removes the extra LSN
calculation, relying only on the LSN given by the function caller
instead.
Author: Bharath Rupireddy
Reviewed-by: Richard Guo, Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACXuh4Ms9j9sxMYdtHEe=5sFcyrs-GAHyADu_A_G71kZTg@mail.gmail.com
The postmaster is not supposed to do anything that depends
fundamentally on shared memory contents, because that creates
the risk that a backend crash that trashes shared memory will
take the postmaster down with it, preventing automatic recovery.
In commit 969d7cd43 I lost sight of this principle and coded
AssignPostmasterChildSlot() in such a way that it could fail
or even crash if the shared PMSignalState structure became
corrupted. Remarkably, we've not seen field reports of such
crashes; but I managed to induce one while testing the recent
changes around palloc chunk headers.
To fix, make a semi-duplicative state array inside the postmaster
so that we need consult only local state while choosing a "child
slot" for a new backend. Ensure that other postmaster-executed
routines in pmsignal.c don't have critical dependencies on the
shared state, either. Corruption of PMSignalState might now
lead ReleasePostmasterChildSlot() to conclude that backend X
failed, when actually backend Y was the one that trashed things.
But that doesn't matter, because we'll force a cluster-wide reset
regardless.
Back-patch to all supported branches, since this is an old bug.
Discussion: https://postgr.es/m/3436789.1665187055@sss.pgh.pa.us
DEFAULT markers appearing in an INSERT on an updatable view
could be mis-processed if they were in a multi-row VALUES clause.
This would lead to strange errors such as "cache lookup failed
for type NNNN", or in older branches even to crashes.
The cause is that commit 41531e42d tried to re-use rewriteValuesRTE()
to remove any SetToDefault nodes (that hadn't previously been replaced
by the view's own default values) appearing in "product" queries,
that is DO ALSO queries. That's fundamentally wrong because the
DO ALSO queries might not even be INSERTs; and even if they are,
their targetlists don't necessarily match the view's column list,
so that almost all the logic in rewriteValuesRTE() is inapplicable.
What we want is a narrow focus on replacing any such nodes with NULL
constants. (That is, in this context we are interpreting the defaults
as being strictly those of the view itself; and we already replaced
any that aren't NULL.) We could add still more !force_nulls tests
to further lobotomize rewriteValuesRTE(); but it seems cleaner to
split out this case to a new function, restoring rewriteValuesRTE()
to the charter it had before.
Per bug #17633 from jiye_sw. Patch by me, but thanks to
Richard Guo and Japin Li for initial investigation.
Back-patch to all supported branches, as the previous fix was.
Discussion: https://postgr.es/m/17633-98cc85e1fa91e905@postgresql.org
Make a common replication origin name formatting function to replace
multiple snprintf() expressions. This also includes logic previously done
by ReplicationOriginNameForTablesync().
This makes the code to generate the origin name consistent among apply
worker and tablesync worker.
Author: Peter Smith
Reviewed-By: Aleksander Alekseev
Discussion: https://postgr.es/m/CAHut%2BPsa8hhfSE6ozUK-ih7GkQziAVAf4f3bqiXEj2nQiu-43g%40mail.gmail.com
This commit expands the coverage of pg_hba.conf with checks specific to
role memberships (one "root" role combined with a member and a
non-member). Coverage is added for the database keywords "samegroup"
and "samerole", where the specified role has to be be a member of the
role with the same name as the requested database, and '+' on the user
entry, where members are allowed. These tests are plugged in the
authentication test 001_password.pl as of extra connection attempts
combined with resets of pg_hba.conf, making them rather cheap.
Author: Nathan Bossart
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20221009211348.GB900071@nathanxps13
This is useful as a way for extensions to process COPY TO rows in the
way they see fit (say auditing, analytics, backend, etc.) without the
need to invoke an external process running as the OS user running the
backend through PROGRAM that requires superuser rights. COPY FROM
already provides a similar callback for logical replication. For COPY
TO, the callback is triggered when we are ready to send a row in
CopySendEndOfRow(), which is the same code path as when sending a row
to a frontend or a pipe/file.
A small test module, test_copy_callbacks, is added to provide some
coverage for this facility.
Author: Bilva Sanaba, Nathan Bossart
Discussion: https://postgr.es/m/253C21D1-FCEB-41D9-A2AF-E6517015B7D7@amazon.com
Before commit c6e0fe1f2, functions such as AllocSetFree could pretty
safely presume that they were given a valid chunk pointer for their
own type of context, because the indirect call through a memory
context object and method struct would be very unlikely to work
otherwise. But now, if pfree() is mistakenly invoked on a pointer
to garbage, we have three chances in eight of ending up at one of
these functions. That means we need to take extra measures to
verify that we are looking at what we're supposed to be looking at,
especially in debug builds.
Hence, add code to verify that the chunk's back-link to a block header
leads to a memory context object that satisfies the right sort of
IsA() check. This is still a bit weaker than what we did before,
but for the moment assume that an IsA() check is sufficient.
As a compromise between speed and safety, implement these checks
as Asserts when dealing with small chunks but plain test-and-elogs
when dealing with large (external) chunks. The latter case should
not be too performance-critical, but the former case probably is.
In slab.c, all chunks are small; but nonetheless use a plain test
in SlabRealloc, because that is certainly not performance-critical,
indeed we should be suspicious that it's being called in error.
In aset.c, additionally add some assertions that the "value" field
of the chunk header is within the small range allowed for freelist
indexes. Without that, we might find ourselves trying to wipe
most of memory when CLOBBER_FREED_MEMORY is enabled, or scribbling
on a "freelist header" that's far away from the context object.
Eventually, field experience might show us that it's smarter for
these tests to be active always, but for now we'll try to get
away with just having them as assertions.
While at it, also be more uniform about asserting that context
objects passed as parameters are of the type we expect. Some
places missed that altogether, and slab.c was for no very good
reason doing it differently from the other allocators.
Discussion: https://postgr.es/m/3578387.1665244345@sss.pgh.pa.us
Remove the Trap and TrapMacro macros, which were nearly unused
and confusingly had the opposite condition polarity from the
otherwise-functionally-equivalent Assert macros.
Having done that, it's very hard to justify carrying the errorType
argument of ExceptionalCondition, so drop that too, and just
let it assume everything's an Assert. This saves about 64K
of code space as of current HEAD.
Discussion: https://postgr.es/m/3928703.1665345117@sss.pgh.pa.us
Instead of Abs() for int64, use the C standard functions labs() or
llabs() as appropriate. Define a small wrapper around them that
matches our definition of int64. (labs() is C90, llabs() is C99.)
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4beb42b5-216b-bce8-d452-d924d5794c63%40enterprisedb.com
Previously PgStat_StatReplSlotEntry contained the slotname, which was mainly
used when writing out the stats during shutdown, to identify the slot in the
serialized data (at runtime the index in ReplicationSlotCtl->replication_slots
is used, but that can change during a restart). Unfortunately the slotname was
overwritten when the slot's stats were reset.
That turned out to only cause "real" problems if the slot was active during
the reset, triggering an assertion failure at the next
pgstat_report_replslot(). In other paths the stats were re-initialized during
pgstat_acquire_replslot().
Fix this by removing slotname from PgStat_StatReplSlotEntry. Instead we can
get the slot's name from the slot itself. Besides fixing a bug, this also is
architecturally cleaner (a name is not really statistics). This is safe
because stats, for a slot removed while shut down, will not be restored at
startup.
In 15 the slotname is not removed, but renamed, to avoid changing the stats
format. In master, bump PGSTAT_FILE_FORMAT_ID.
This commit does not contain a test for the fix. I think this can only be
tested by a tap test starting pg_recvlogical in the background and checking
pg_recvlogical's output. That type of test is notoriously hard to be reliable,
so committing it shortly before the release is wrapped seems like a bad idea.
Reported-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/YxfagaTXUNa9ggLb@ahch-to
Backpatch: 15-, where the bug was introduced in 5891c7a8ed
This way we don't need RANLIB anymore, making it a bit simpler for the meson
build to generate Makefile.global for PGXS compatibility.
FreeBSD, NetBSD, OpenBSD, the only platforms where we didn't use AROPT=crs,
all have supported the 's' option for a long time.
On macOS we ran ranlib after installing a static library. This was added a
long time ago, in 58ad65ec2d. I cannot reproduce an issue in more recent
macOS versions. This is removed now.
Based on discussion with Tom, I left the 'touch' at the end of static
libraries generation, added in 826eff57c4, in place. While it looks like
current versions of Apple's ar/ranlib don't need it, it was needed not too
long ago.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
There are a number of bugs in this area. Two of them are fixed here,
namely:
1. get_relation_idx_constraint_oid does not restrict the type of
constraint that's returned, so with sufficient bad luck it can
return the OID of a foreign key constraint. This has the effect that
a primary key in a partition can end up as a child of a foreign key,
which makes no sense (it needs to be the child of the equivalent
primary key.)
Change the API contract so that only index-backed constraints are
returned, mimicking get_constraint_index().
2. Both CloneFkReferenced and CloneFkReferencing clone a
self-referencing foreign key, so the partition ends up with
a duplicate foreign key. Change the former function to ignore such
constraints.
Add some tests to verify that things are better now. (However, these
new tests show some additional misbehavior that will be fixed later --
namely that there's a constraint marked NOT VALID.)
Backpatch to 12, where these constraints are possible at all.
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Discussion: https://postgr.es/m/20220603154232.1715b14c@karst
Commit c6e0fe1f2 was a shade too trusting that any pointer passed
to pfree, repalloc, etc will point at a valid chunk. Notably,
passing a pointer that was actually obtained from malloc tended
to result in obscure assertion failures, if not worse. (On FreeBSD
I've seen such mistakes take down the entire cluster, seemingly as
a result of clobbering shared memory.)
To improve matters, extend the mcxt_methods[] array so that it
has entries for every possible MemoryContextMethodID bit-pattern,
with the currently unassigned ID codes pointing to error-reporting
functions. Then, fiddle with the ID assignments so that patterns
likely to be associated with bad pointers aren't valid ID codes.
In particular, we should avoid assigning bit patterns 000 (zeroed
memory) and 111 (wipe_mem'd memory).
It turns out that on glibc (Linux), malloc uses chunk headers that
have flag bits in the same place we keep MemoryContextMethodID,
and that the bit patterns 000, 001, 010 are the only ones we'll
see as long as the backend isn't threaded. So we can have very
robust detection of pfree'ing a malloc-assigned block on that
platform, at least so long as we can refrain from using up those
ID codes. On other platforms, we don't have such a good guarantee,
but keeping 000 reserved will be enough to catch many such cases.
While here, make GetMemoryChunkMethodID() local to mcxt.c, as there
seems no need for it to be exposed even in memutils_internal.h.
Patch by me, with suggestions from Andres Freund and David Rowley.
Discussion: https://postgr.es/m/2910981.1665080361@sss.pgh.pa.us
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
Previously, the subscription stats entry was created when the first
stats, i.e., an error on apply worker or tablesync worker, were
reported. Therefore, the stats_reset field was not updated by
pg_stat_reset_subscription_stats() if the stats entry was not
populated yet, which was different behavior than other statistics.
This change creates the subscription stats entry and initializes it at
CREATE SUBSCRIPTION time.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAAKRu_Zqd-e5imT_3-ZiQv1cfsWuy16OJTiUaCvqpq4V7GVdSg@mail.gmail.com
When using precompiled headers, we cannot pre-define macros for the system
headers from within .c files, as headers are already processed before
the #define in the C file is reached. But we can pre-define using
-DFD_SETSIZE, as long as that's also used when building the precompiled header.
A few files #define FD_SETSIZE 1024 on windows, as the default is only 64. I
am hesitant to change FD_SETSIZE globally on windows, due to
src/backend/port/win32/socket.c using it to size on-stack arrays. Instead add
-DFD_SETSIZE=1024 when building the specific targets needing it.
We likely should move away from using select() in those places, but that's a
larger change.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005190829.lda7ttalh4mzrvf4@awork3.anarazel.de
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
MemoryContextContains is no longer reliable in the wake of c6e0fe1f2,
because there's no longer very much redundancy in chunk headers.
(It wasn't *completely* reliable even before that, as there was a
chance of a false positive if you passed it something that didn't
point to an mcxt chunk at all. But it was generally good enough.)
Hence, remove it. There is no remaining core code that requires it.
Extensions that have been using it might be able to substitute a
test like "GetMemoryChunkContext(ptr) == context", recognizing that
this explicitly requires that the pointer point to some chunk.
Tom Lane and David Rowley
Discussion: https://postgr.es/m/1913788.1664898906@sss.pgh.pa.us
MemoryContextContains is no longer reliable in the wake of c6e0fe1f2,
so we need to get rid of these uses.
It appears that there's no really good reason to force the result of
an aggregate's finalfn or serialfn to be allocated in the per-tuple
context. The only other plausible case is that the result points to
or into the aggregate's transition value, and that's fine because it
will last as long as we need it to. (This conclusion depends on the
assumption that finalfns are not allowed to scribble on the transition
value, but we've long required that.) So we can just drop the
MemoryContextContains plus datumCopy business, although we do need
to take care to not return a read-write pointer when the transition
value is an expanded datum.
Likewise, we don't really need to force the result of a window
function to be in the output context. In this case, the plausible
alternative is that it's pointing into the temporary tuple slot used
by WinGetFuncArgInPartition or WinGetFuncArgInFrame (since those
functions could return such a pointer, which might become the window
function's result). That will hold still for long enough, unless
there is another window function using the same WindowObject.
I'm content to always perform a datumCopy when there's more than one
such function.
On net, these changes should provide small speed improvements as well
as removing problematic code.
Tom Lane and David Rowley
Discussion: https://postgr.es/m/1913788.1664898906@sss.pgh.pa.us
The RecoveryLockLists data structure, which tracks all exclusive
locks that the startup process is holding on behalf of transactions
being replayed, did not have any provision for avoiding duplicate
entries for the same lock. Maybe that was okay when the code was
first written. However, modern practice is for checkpoints to
write fresh lists of all active exclusive locks into the WAL.
Thus, an exclusive lock that survives across multiple checkpoints
causes bloat in standbys' startup processes. If there are a lot
of such locks this can look like a memory leak, and it's even
possible to drive the startup process into a palloc failure from
an over-length List.
To fix, use a hash table instead of simple lists to track the
locks being held. Allowing for dynahash overhead, this requires
a little more space per lock than the old way (although it's the
same size as what we were allocating prior to c6e0fe1f2). It's
probably a shade slower too. However, testing indicates that the
penalty is negligible on ordinary workloads, so let's make this
change to improve robustness in extreme cases.
Patch by me, per report from Dmitriy Kuzmin. No back-patch
(for now anyway), since it seems that a significant improvement
would only occur in corner cases.
Discussion: https://postgr.es/m/CAHLDt=_ts0A7Agn=hCpUh+RCFkxd+G6uuT=kcTfqFtGur0dp=A@mail.gmail.com
ts_locale.c omitted support for "isalnum" tests, perhaps on the
grounds that there were initially no use-cases for that. However,
both ltree and pg_trgm need such tests, and we do also have one
use-case now in the core backend. The workaround of testing
isalpha and isdigit separately seems quite inefficient, especially
when dealing with multibyte characters; so let's fill in the
missing support.
Discussion: https://postgr.es/m/2548310.1664999615@sss.pgh.pa.us
The test is changed to test for connection strings rather than specific
roles, and the reset logic of pg_hba.conf is extended so as the database
and user name entries can be directly specified. This is aimed at being
used as a base for more test scenarios of pg_hba.conf and authentication
paths.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/Yz0xO0emJ+mxtj2a@paquier.xyz
This optional parameter can be specified in cases where there are nested
PG_TRY() statements within a function in order to stop the compiler from
issuing warnings about shadowed local variables when compiling with
-Wshadow. The optional parameter is used as a suffix on the variable
names declared within the PG_TRY(), PG_CATCH(), PG_FINALLY() and
PG_END_TRY() macros. The parameter, if specified, must be the same in
each component macro of the given PG_TRY() block.
This also adjusts the single case where we have nested PG_TRY() statements
to add a parameter to the inner-most PG_TRY().
This reduces the number of compiler warnings when compiling with
-Wshadow=compatible-local from 5 down to 1.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvqWGMdB_pATeUqE=JCtNqNxObPOJ00jFEa2_sZ20j_Wvg@mail.gmail.com
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Required for correct resource file generation, as the resource files should
only be added to the shared library.
This also fixes a bunch of issues in the .pc files.
Previously I tried to avoid building sources twice, once for the static and
once for the shared libraries. We could still do so, but it's not clear that
it's worth the complication.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20220927011951.j3h4o7n6bhf7dwau@awork3.anarazel.de
Improvements:
- we don't need -DFRONTEND for libpq anymore since 1d77afefbd
- the .pc file contents for a static libpq were wrong (referencing
{pgport, common}_shlib)
- incidentally fixes meson not supporting link_whole on AIX yet
- added explanatory comments
Previously I tried to avoid building libpq's sources twice, once for the
static and once for the shared library. We could still do so, but it's not
clear that it's worth the complication.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
In a similar effort to f01592f91, here we mostly rename shadowed local
variables to remove the warnings produced when compiling with
-Wshadow=compatible-local.
This fixes 63 warnings and leaves just 5.
Author: Justin Pryzby, David Rowley
Reviewed-by: Justin Pryzby
Discussion https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
When scanning for the end of WAL, pg_resetwal has been maintaining its
own internal logic to calculate segment numbers and to parse a WAL
segment name for its timeline and segment number. The code claimed for
example that XLogFromFileName() cannot be used because it lacks the
possibility of specifying a WAL segment size, which is not the case
since fc49e24, that has made the WAL segment size configurable at
initialization time, extending this routine to do so.
Similarly, this switches one segment number calculation to use
XLByteToSeg() rather than the same logic present in xlog_internal.h.
While on it, switch to TimeLineID in pg_resetwal.c for TLI numbers
parsed from segment names, to be more consistent with
XLogFromFileName(). The maths are exactly the same, but the code gets
simplified.
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACX+E_jnwqH_jmjhNG8BczJTNRTOLpw8K1CB1OcB48MJ8w@mail.gmail.com
This improves the tab completion of psql on a few points:
- Provide a list of subscriptions on \dRs.
- Provide a list of publications on \dRp.
- Add CURRENT_ROLE, CURRENT_USER, SESSION_USER when OWNER TO is provided
at the end of a query (as defined by RoleSpec in gram.y).
Author: Vignesh C
Reviewed-by: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/CALDaNm3toRBt6c6saY3174f7CsGztXRvVvfWbikkJEXY7x5WAA@mail.gmail.com
This cleans up a couple of areas:
- Remove XLogSegNo calculation for the last WAL segment in backup in
xlog.c (7d70809 has moved this logic entirely to xlogbackup.c when
building the contents of the backup history file).
- Remove check on log_min_duration in analyze.c, as it is already true
where this code path is reached.
- Simplify call to find_option() in guc.c.
Author: Ranier Vilela
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAEudQArCDQQiPiFR16=yu9k5s2tp4tgEe1U1ZbkW4ofx81AWWQ@mail.gmail.com
This commit expands the TAP tests of pg_upgrade when running these with
different major versions for the "old" cluster (to-be-upgraded) and the
"new" cluster (upgraded-to), by backporting some of the buildfarm
facilities directory into the script:
- Remove comments from the dump files, avoiding version-dependent
information.
- Remove empty lines from the dump files.
- Use --extra-float-digits=0 in the pg_dump command, when using an "old"
cluster with version equal to or lower than v11.
- Use --wal-segsize and --allow-group-access in initdb only when the
"old" cluster is equal to or higher than v11.
This allows the tests to pass down to v14 with the main regression test
suite, while v9.5~13 still generate some diffs, but these are minimal
compared to what happened before this commit. Much more could be done,
especially around dump differences with function and procedures (these
can also be avoided with direct manipulation of the dumps loaded, for
example, in a way similar to the buildfarm), but at least the basics are
in place now.
Reviewed-by: Justin Pryzby, Anton A. Melnikov
Discussion: https://postgr.es/m/Yox1ME99GhAemMq1@paquier.xyz
Otherwise we don't use LLVM's flags when building llvmjit_wrap.cpp and
llvmjit_inline.cpp. That can cause compile time failures if the C++ compiler
doesn't default to a new enough C++ standards version and link time failures
due to ABI influencing flags like -fno-rtti.
The pre-v15 behavior was to discard all but the last result,
but with the new behavior of printing all results by default,
we will send each such result to the \g file. However,
we're still opening and closing the \g file for each result,
so you lose all but the last result anyway. Move the output-file
state up to ExecQueryAndProcessResults so that we open/close the
\g file only once per command string.
To support this without changing other behavior, we must
adjust PrintQueryResult to have separate FILE * arguments
for query and status output (since status output has never
gone to the \g file). That in turn makes it a good idea
to push the responsibility for fflush'ing output down to
PrintQueryTuples and PrintQueryStatus.
Also fix an infinite loop if COPY IN/OUT is attempted in \watch.
We used to reject that, but that error exit path got broken
somewhere along the line in v15. There seems no real reason
to reject it anyway as the code now stands, so just remove
the error exit and make sure that COPY OUT data goes to the
right place.
Also remove PrintQueryResult's unused is_watch parameter,
and make some other cosmetic cleanups (adjust obsolete
comments, break some overly-long lines).
Daniel Vérité and Tom Lane
Discussion: https://postgr.es/m/4333844c-2244-4d6e-a49a-1d483fbe304f@manitou-mail.org
This reverts commit db0d67db24 and
several follow-on fixes. The idea of making a cost-based choice
of the order of the sorting columns is not fundamentally unsound,
but it requires cost information and data statistics that we don't
really have. For example, relying on procost to distinguish the
relative costs of different sort comparators is pretty pointless
so long as most such comparator functions are labeled with cost 1.0.
Moreover, estimating the number of comparisons done by Quicksort
requires more than just an estimate of the number of distinct values
in the input: you also need some idea of the sizes of the larger
groups, if you want an estimate that's good to better than a factor of
three or so. That's data that's often unknown or not very reliable.
Worse, to arrive at estimates of the number of calls made to the
lower-order-column comparison functions, the code needs to make
estimates of the numbers of distinct values of multiple columns,
which are necessarily even less trustworthy than per-column stats.
Even if all the inputs are perfectly reliable, the cost algorithm
as-implemented cannot offer useful information about how to order
sorting columns beyond the point at which the average group size
is estimated to drop to 1.
Close inspection of the code added by db0d67db2 shows that there
are also multiple small bugs. These could have been fixed, but
there's not much point if we don't trust the estimates to be
accurate in-principle.
Finally, the changes in cost_sort's behavior made for very large
changes (often a factor of 2 or so) in the cost estimates for all
sorting operations, not only those for multi-column GROUP BY.
That naturally changes plan choices in many situations, and there's
precious little evidence to show that the changes are for the better.
Given the above doubts about whether the new estimates are really
trustworthy, it's hard to summon much confidence that these changes
are better on the average.
Since we're hard up against the release deadline for v15, let's
revert these changes for now. We can always try again later.
Note: in v15, I left T_PathKeyInfo in place in nodes.h even though
it's unreferenced. Removing it would be an ABI break, and it seems
a bit late in the release cycle for that.
Discussion: https://postgr.es/m/TYAPR01MB586665EB5FB2C3807E893941F5579@TYAPR01MB5866.jpnprd01.prod.outlook.com
This commit introduces an authentication test for the peer method, as of
a set of scenarios with and without a user name map. The script is
automatically skipped if peer is not supported in the environment where
this test is run, checking this behavior by attempting a connection
first on a cluster up and running.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/aa60994b-1c66-ca7a-dab9-9a200dbac3d2@amazon.com
Both check_application_name() and check_cluster_name() use
pg_clean_ascii() but didn't release the memory. Depending on when the
GUC is set, this might be cleaned up at some later time or it would
leak postmaster memory once. In any case, it seems better not to have
to rely on such analysis and make the code locally robust. Also, this
makes Valgrind happier.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/CAD21AoBmFNy9MPfA0UUbMubQqH3AaK5U3mrv6pSeWrwCk3LJ8g@mail.gmail.com
Commit 34f581c39 intended to ensure that RelationGetBufferForTuple
would acquire a visibility-map page pin in case the otherBuffer's
all-visible bit had become set since we last had lock on that page.
But I missed a case: when we're extending the relation, VM concerns
were dealt with only in the relatively-less-likely case that we
fail to conditionally lock the otherBuffer. I think I'd believed
that we couldn't need to worry about it if the conditional lock
succeeds, which is true for the target buffer; but the otherBuffer
was unlocked for awhile so its bit might be set anyway. So we need
to do the GetVisibilityMapPins dance, and then also recheck the
page's free space, in both cases.
Per report from Jaime Casanova. Back-patch to v12 as the previous
patch was (although there's still no evidence that the bug is
reachable pre-v14).
Discussion: https://postgr.es/m/E1lWLjP-00006Y-Ml@gemulon.postgresql.org
Currently, PQsslAttributeNames() returns the same list of attribute
names regardless of its conn parameter. This patch changes it to
have behavior parallel to what 80a05679d installed for PQsslAttribute:
you get OpenSSL's attributes if conn is NULL or is an SSL-encrypted
connection, or an empty list if conn is a non-encrypted connection.
The point of this is to have sensible connection-dependent behavior
in case we ever support multiple SSL libraries. The behavior for
NULL can be defined as "the attributes for the default SSL library",
parallel to what PQsslAttribute(NULL, "library") does.
Since this is mostly just future-proofing, no back-patch.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
I (Álvaro) broke tab-completion for GRANT .. ALL TABLES IN SCHEMA while
removing ALL from the publication syntax for schemas in the
aforementioned commit. I also missed to update a bunch of
tab-completion rules for ALTER/CREATE PUBLICATION that match each
individual piece of ALL TABLES IN SCHEMA. Repair those bugs.
While fixing up that commit, update a couple of outdated comments
related to the same change.
Backpatch to 15.
Author: Shi yu <shiy.fnst@fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/OSZPR01MB6310FCE8609185A56344EED2FD559@OSZPR01MB6310.jpnprd01.prod.outlook.com
The last caller of UnpinBuffer() that did not want to adjust
CurrentResourceOwner was removed in 2d115e4, and nothing has been
introduced in bufmgr.c to do the same thing since. This simplifies 10
code paths.
Author: Aleksander Alekseev
Reviewed-by: Nathan Bossart, Zhang Mingli, Bharath Rupireddy
Discussion: https://postgr.es/m/CAJ7c6TOmmFpb6ohurLhTC7hKNJWGzdwf8s4EAtAZxD48g-e6Jw@mail.gmail.com
Commit ebc8b7d44 intended to change the behavior of
PQsslAttribute(NULL, "library"), but accidentally also changed
what happens with a non-NULL conn pointer. Undo that so that
only the intended behavior change happens. Clarify some
associated documentation.
Per bug #17625 from Heath Lord. Back-patch to v15.
Discussion: https://postgr.es/m/17625-fc47c78b7d71b534@postgresql.org
The one about "terminating process to release replication slot" told
you nothing about why that was happening. The one about "invalidating
slot because its restart_lsn exceeds max_slot_wal_keep_size" told you
what was happening, but violated our message style guideline about
keeping the primary message short. Add DETAIL/HINT lines to carry
the appropriate detail and make the two cases more uniform.
While here, fix bogus test logic in 019_replslot_limit.pl: if it timed
out without seeing the expected log message, no test failure would be
reported. This is flat broken since commit 549ec201d removed the test
counts; even before that it was horribly bad style, since you'd only
get told that not all tests had been run.
Kyotaro Horiguchi, reviewed by Bertrand Drouvot; test fixes by me
Discussion: https://postgr.es/m/20211214.130456.2233153190058148084.horikyota.ntt@gmail.com
Up to now, the ID values returned by pg_stat_get_backend_idset() and
used by pg_stat_get_backend_activity() and allied functions were just
indexes into a local array of sessions seen by the last stats refresh.
This is problematic for a few reasons. The "ID" of a session can vary
over its existence, which is surprising. Also, while these numbers
often match the "backend ID" used for purposes like temp schema
assignment, that isn't reliably true. We can fairly cheaply switch
things around to make these numbers actually be the sessions' backend
IDs. The added test case illustrates that with this definition, the
temp schema used by a given session can be obtained given its PID.
While here, delete some dead code that guarded against getting
a NULL return from pgstat_fetch_stat_local_beentry(). That can't
happen as long as the caller is careful to pass an in-range array
index, as all the callers are. (This code may not have been dead
when written, but it surely is now.)
Nathan Bossart
Discussion: https://postgr.es/m/20220815205811.GA250990@nathanxps13
SYSTEM_USER is a reserved keyword of the SQL specification that,
roughly described, is aimed at reporting some information about the
system user who has connected to the database server. It may include
implementation-specific information about the means by the user
connected, like an authentication method.
This commit implements SYSTEM_USER as of auth_method:identity, where
"auth_method" is a keyword about the authentication method used to log
into the server (like peer, md5, scram-sha-256, gss, etc.) and
"identity" is the authentication identity as introduced by 9afffcb (peer
sets authn to the OS user name, gss to the user principal, etc.). This
format has been suggested by Tom Lane.
Note that thanks to d951052, SYSTEM_USER is available to parallel
workers.
Bump catalog version.
Author: Bertrand Drouvot
Reviewed-by: Jacob Champion, Joe Conway, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/7e692b8c-0b11-45db-1cad-3afc5b57409f@amazon.com
We'd like to use precompiled headers on windows to reduce compile times. Right
now we rely on defining UMDF_USING_NTSTATUS before including postgres.h in a few
select places - which doesn't work with precompiled headers. Instead define
it globally.
When UMDF_USING_NTSTATUS is defined we need to explicitly include ntstatus.h,
winternl.h to get a comparable set of symbols. Right now these includes would
be required in a number of non-platform-specific .c files - to avoid that,
include them in win32_port.h. Based on my measurements that doesn't increase
compile times measurably.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220927011951.j3h4o7n6bhf7dwau@awork3.anarazel.de
This doesn't end up with a triple that's exactly the same as config.guess -
it'd be hard to achieve that and it doesn't seem required. We can't rely on
config.guess as we don't necessarily have a /bin/sh on windows, e.g., when
building on windows with msvc.
This isn't perfect, e.g., clang works on windows as well. But I suspect we'd
need a bunch of other changes to make clang on windows work, and we haven't
supported it historically.
Discussion: http://postgr.es/m/20220928022724.erzuk5v4ai4b53do@awork3.anarazel.de
Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
91e9e89dc modified nodeSort.c so that it used datum sorts when the
targetlist of the outer node contained only a single column. That commit
failed to recognise that the Datum returned by tuplesort_getdatum() must
be pfree'd when the type is a byref type. Ronan Dunklau did originally
propose the patch with that restriction, but that, probably through my own
fault, got lost during further development work.
Due to the timing of this report (PG15 RC1 is almost out the door), let's
just restrict the datum sort optimization to apply for byval types only.
We might want to look harder into making this work for byref types in
PG16.
Reported-by: Önder Kalacı
Diagnosis-by: Tom Lane
Discussion: https://postgr.es/m/CACawEhVxe0ufR26UcqtU7GYGRuubq3p6ZWPGXL4cxy_uexpAAQ@mail.gmail.com
Backpatch-through: 15, where 91e9e89dc was introduced.
Fetch the next-item pointer before the call not after, so that
we aren't dereferencing a dangling pointer if the callback
deregistered itself during the call. The risky coding pattern
appears in CallXactCallbacks, CallSubXactCallbacks, and
ResourceOwnerReleaseInternal. (There are some other places that
might be at hazard if they offered deregistration functionality,
but they don't.)
I (tgl) considered back-patching this, but desisted because it
wouldn't be very safe for extensions to rely on this working in
pre-v16 branches.
Hao Wu
Discussion: https://postgr.es/m/CAH+9SWXTiERkmhRke+QCcc+jRH8d5fFHTxh8ZK0-Yn4BSpyaAg@mail.gmail.com
This prevents marking the argument string for translation for gettext,
and it also prevents the given string (which is already translated) from
being translated at runtime.
Also, mark the strings used as arguments to check_rolespec_name for
translation.
Backpatch all the way back as appropriate. None of this is caught by
any tests (necessarily so), so I verified it manually.
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
SharedInvalSmgrMsg can't require 8-byte alignment, because then
SharedInvalidationMessage will require 8-byte alignment, which will
then cause ParseCommitRecord to fail on machines that are picky
about alignment, because it assumes that everything that gets
packed into a commit record requires only 4-byte alignment.
Another problem with 05d4cbf9b6.
Discussion: http://postgr.es/m/3825454.1664310917@sss.pgh.pa.us
The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
For the *GetDatumFast() macros, converting to an inline function
doesn't work in the !USE_FLOAT8_BYVAL case, but we can use
AssertVariableIsOfTypeMacro() to get a similar level of type checking.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Previously, these were declared in postgres_ext.h, but they are not
needed nearly so widely as the OID declarations, so that doesn't
necessarily make sense. Also, because postgres_ext.h is included
before most of c.h has been processed, the previous location creates
some problems for a pending patch.
Patch by me, reviewed by Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoYc8oevMqRokZQ4y_6aRn-7XQny1JBr5DyWR_jiFtONHw@mail.gmail.com
Push the units fields over to the left so that all the single-bit
flags can be together. I considered rearranging the single-bit
flags to try to group flags with similar purposes, but eventually
decided that that involved too many judgment calls.
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
Previously, the transaction-property GUCs such as transaction_isolation
could be reset after starting a transaction, because we marked them
as GUC_NO_RESET_ALL but still allowed a targeted RESET. That leads to
assertion failures or worse, because those properties aren't supposed
to change after we've acquired a transaction snapshot.
There are some NO_RESET_ALL variables for which RESET is okay, so
we can't just redefine the semantics of that flag. Instead introduce
a separate GUC_NO_RESET flag. Mark "seed", as well as the transaction
property GUCs, as GUC_NO_RESET.
We have to disallow GUC_ACTION_SAVE as well as straight RESET, because
otherwise a function having a "SET transaction_isolation" clause can
still break things: the end-of-function restore action is equivalent
to a RESET.
No back-patch, as it's conceivable that someone is doing something
this patch will forbid (like resetting one of these GUCs at transaction
start, or "CREATE FUNCTION ... SET transaction_read_only = 1") and not
running into problems with it today. Given how long we've had this
issue and not noticed, the side effects in non-assert builds can't be
too serious.
Per bug #17385 from Andrew Bille.
Masahiko Sawada
Discussion: https://postgr.es/m/17385-9ee529fb091f0ce5@postgresql.org
While at it, remove an unused queryString parameter from
CheckPubRelationColumnList() and make other minor stylistic changes.
Backpatch to 15.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/20220926.160426.454497059203258582.horikyota.ntt@gmail.com
We weren't jumbling the merge action list, so wildly different commands
would be considered to use the same query ID. Add that, mention it in
the docs, and some test lines.
Backpatch to 15.
Author: Tatsu <bt22nakamorit@oss.nttdata.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://postgr.es/m/d87e391694db75a038abc3b2597828e8@oss.nttdata.com
This was used as the returned result type of the generated contents for
the backup_label and backup history files. This is replaced by a simple
string, reducing the cleanup burden of all the callers of
build_backup_content().
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/YzERvNPaZivHEKZJ@paquier.xyz
Historically we've been more worried about making the output of
float fields look pretty than whether they'd be read back exactly.
That won't work if we're to compare the read-back nodes for
equality, so switch to using the Ryu code for float output.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
Historically, outToken has represented both NULL and empty-string
strings as "<>", which readfuncs.c then read as NULL, thus failing
to preserve empty-string fields accurately. Remarkably, this has
not caused any serious problems yet, but let's fix it.
We'll keep the "<>" notation for NULL, and use """" for empty string,
because that matches other notational choices already in use.
An actual input string of """" is converted to "\""" (this was true
already, apparently as a hangover from an ancient time when string
quoting was handled directly by pg_strtok).
CHAR fields also use "<>", but for '\0'.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
This change simplifies some of the logic related to the generation and
creation of the backup_label and backup history files, which has become
unnecessarily complicated since the removal of the exclusive backup mode
in commit 39969e2. The code was previously generating the contents of
these files as a string (start phase for the backup_label and stop phase
for the backup history file), one problem being that the contents of the
backup_label string were scanned to grab some of its internal contents
at the stop phase.
This commit changes the logic so as we store the data required to build
these files in an intermediate structure named BackupState. The
backup_label file and backup history file strings are generated when
they are ready to be sent back to the client. Both files are now
generated with the same code path. While on it, this commit renames
some variables for clarity.
Two new files named xlogbackup.{c,h} are introduced in this commit, to
remove from xlog.c some of the logic around base backups. Note that
more could be moved to this new set of files.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACXWwTDgJqCjdaPyfR7djwm6SrybGcrZyrvojzcsmt4FFw@mail.gmail.com
Commit 25936fd46 adjusted things so that the "storeslot" we use
for remapping trigger tuples would have adequate lifespan, but it
neglected to consider the lifespan of the tuple descriptor that
the slot depends on. It turns out that in at least some cases, the
tupdesc we are passing is a refcounted tupdesc, and the refcount for
the slot's reference can get assigned to a resource owner having
different lifespan than the slot does. That leads to an error like
"tupdesc reference 0x7fdef236a1b8 is not owned by resource owner
SubTransaction". Worse, because of a second oversight in the same
commit, we'd try to free the same tupdesc refcount again while
cleaning up after that error, leading to recursive errors and an
"ERRORDATA_STACK_SIZE exceeded" PANIC.
To fix the initial problem, let's just make a non-refcounted copy
of the tupdesc we're supposed to use. That seems likely to guard
against additional problems, since there's no strong reason for
this code to assume that what it's given is a refcounted tupdesc;
in which case there's an independent hazard of the tupdesc having
shorter lifespan than the slot does. (I didn't bother trying to
free said copy, since it should go away anyway when the (sub)
transaction context is cleaned up.)
The other issue can be fixed by making the code added to
AfterTriggerFreeQuery work like the rest of that function, ie be
sure that it doesn't try to free the same slot twice in the event
of recursive error cleanup.
While here, also clean up minor stylistic issues in the test case
added by 25936fd46: don't use "create or replace function", as any
name collision within the tests is likely to have ill effects
that that won't mask; and don't use function names as generic as
trigger_function1, especially if you're not going to drop them
at the end of the test stanza.
Per bug #17607 from Thomas Mc Kay. Back-patch to v12, as the
previous fix was.
Discussion: https://postgr.es/m/17607-bd8ccc81226f7f80@postgresql.org
Commit 4fb5c794e intended to add coverage of some ambuildempty
methods that were not getting reached, without removing any
test coverage. However, by changing a temp table to unlogged
it managed to negate the intent of 4c51a2d1e, which means that
we didn't have reliable test coverage of ginvacuum.c anymore.
As things stand, much of that file might or might not get reached
depending on timing, which seems pretty undesirable.
Although this is only clearly broken for the GIN test, it seems
best to revert 4fb5c794e altogether and instead add bespoke test
cases covering unlogged indexes for these four AMs. We don't
need to do very much with them, so the extra tests are cheap.
(Note that btree, hash, and bloom already have similar test cases,
so they need no additional work.)
We can also undo dec8ad367. Since the testing deficiency that that
hacked around was later fixed by 2f2e24d90, let's intentionally leave
an unlogged table behind to improve test coverage in the modules that
use the regression database for other test purposes. (The case I used
also leaves an unlogged sequence behind.)
Per report from Alex Kozhemyakin. Back-patch to v15 where the
faulty test came in.
Discussion: https://postgr.es/m/b00c8ee096ee46cd25c183125562a1a7@postgrespro.ru
The node types A_Const, Constraint, and A_Expr had custom output
functions, but no read functions were implemented so far.
The A_Expr output format had to be tweaked a bit to make it easier to
parse.
Be a bit more cautious about applying strncmp to unterminated strings.
Also error out if an unrecognized enum value is found in each case,
instead of just printing a placeholder value. That was maybe ok for
debugging but won't work if we want to have robust round-tripping.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
The node tokenizer went out of its way to store BitString node values
without the leading 'b'. But everything else in the system stores the
leading 'b'. This would break if a BitString node is
read-printed-read.
Also, the node tokenizer didn't know that BitString node tokens could
also start with 'x'.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
The main parser checks whether a literal fits into an int when
deciding whether it should be put into an Integer or Float node. The
parser processes integer literals without signs. So a most-negative
integer literal will not fit into Integer and will end up as a Float
node.
The node tokenizer did this differently. It included the sign when
checking whether the literal fit into int. So a most-negative integer
would indeed fit that way and end up as an Integer node.
In order to preserve the node structure correctly, we need the node
tokenizer to also analyze integer literals without sign.
There are a number of test cases in the regression tests that have a
most-negative integer argument of some utility statement, so this
issue is easily reproduced under WRITE_READ_PARSE_PLAN_TREES.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/4159834.1657405226@sss.pgh.pa.us
There's really no need to build win32ver.rc as part of building
pgmsgevent.rc. This will make it sligthly easier to add rc file generation to
the meson build.